door catalogue for becker sectional door...

Door Catalogue for BECKERSectional Door Drives

Contents

Door Catalogue for BECKER Sectional Door Drives,

ContentsAbout us / Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

1. The drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5-6

2. General functions / Advantages at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7-8

3. Load tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9-10

4. Performance data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11-13

5. Dimensional drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14-15

Item No. VTKT SE000030DEB

Introduction


„For us, quality is not just about products.It’s a way of thinking”For us, quality is an all-embracing company philosophy – the sum ofall activities within our company’s value chain. This applies just asmuch to innovative product development and training as it does toconsultation and service. And, it goes without saying that for us atBECKER quality also means compliance with essential internationalstandards, such as DIN ISO EN 9001 or the European CE marking.

But we go far beyond this.

Perhaps this is why we have succeeded in developing into aninternational family-run company in the space of eight decades. Weare committed to shaping the future by setting new standards inhigh-quality technology – with the help of creativity and innovation.In this sense, we see the products on the following pages as the resultof our prevailing company maxims, and we will be delighted if they canalso contribute to the success of your business.

If you would like to find out more about the quality of our broadproduct range, or are interested in particular products, please do nothesitate to contact us on:

Telephone +49 (0) 27 72/5 07-0Fax +49 (0) 27 72/5 07-151

[email protected]://www.becker-antriebe.de

The Drives


Sectional Door Drives and Controls

BECKER sectional door drivesare suitable for …• Solid and tubular shafts

1“ - shaft1“ - drawn tubes

• 25 mm + 1“ shaft(150 series)

The sectional door is the most frequently used door system inindustrial applications throughout Europe. You will therefore find thatthe BECKER sectional door range offers a wide selection of drive seriestailored to your individual requirements.

For sectional doors, BECKER offers the following drive types withvarious specifications: AW 25–A 140 single phase and three-phaseA.C. drives, A 50 E - A 140 E with electronic limit switching andA 50-A 70 DMR sectional door drives with torque control.

Performance data:• From 25 Nm to 140 Nm• For three-phase A.C. (3 x 400 volt/50Hz,

can be changed to 3 x 230 volt / 50Hz)

• For single-phase A.C. (1 x 230 volt/50Hz)

Structure of the article designation:

5. Manual actuation

4. Speed

3. Limit switching

2. Torque

1. Type

1. Type: 2. Torque ( Nm ):A = Direct-mount drive See table, page 9,10,11AW = Alternating current driveR = Tubular drive

3. Limit switching: 4. Speed ( 1/min. ):Without = Mechanical limit switching See table, page 9,10,11E = Electronic limit switchingDMR = Torque control

5. Manual actuation:Examples: HK = Hand crankA 50 E/25 HK LK = Light hand-chain

AK = Disconnecting clutch


The Drives


Safe and easy to install: the newDMR drive and control system

AW 25 – A 140 Single phase and three-phase A.C. drives with mechanical limit switchingA 50 E – A 140 E with electronic limit switchingA 50 DMR – A 70 DMR sectional door drives with torque controlOur three limit switching concepts provide maximum flexibility for spring-balanced sectional doorsin both the private and industrial sector. Complemented by our superior control technology, theyare the perfect solution for a wide range of applications.

Whether dead-man’s control or self-locking, with pneumatic, electrical or optical rail – we have the perfect solutionfor all your requirements.

From single phase drives for door weights up to approx. 480 kg anddoor speeds up to 0.29 m/s through to three-phase drives for doorweights up to approx. 780 kg with door speeds up to 0.33 m/s – all ofour sectional door drives with disconnecting clutch can be easilydisconnected from the door shaft, e.g. in the event of a power failure.Equipped with this special design feature, the drives meet the stringentrequirements for fire stations, doors, DIN 14092 and the guidelines forpower-operated doors. In addition, with the aid of a suitable cabledrum, the drive will easily reach the opening speed required by thisstandard. Setting the end limits is particularly easy and convenient ondrives A 50 E – A 140 E with electronic limit switching: the final limitpositions can be set from the ground using the S 80 door control.

DMR stands for torque control and means that BECKER drives A 50DMR and A 70 DMR operate without final limit positions. This offerspalpable advantages when it comes to installation, as no adjustmentis required to the final limit positions when the door is installed. Asingle raising and lowering of the door suffices to set the final limitpositions. In the event of subsequent changes to the opening dimensions,e.g. due to laying of a screed, the intelligent DMR control automaticallyadjusts to this and carefully regulates the torque requirement of thedoor in every position. Alongside the exceptional ease of installation,this system provides optimal safety. In addition to the standardbottom pneumatic safety-edge rail, the DMR control stops the door assoon as it is subjected to any mechanical stress which causes thetorque requirement to increase unexpectedly, e.g. if a fork lift truckdrives into the door. Intermediate positions can also be convenientlyprogrammed with the DMR control: the practical summer/wintersetting of the door is a prime example.

GeneralFunctions


A 50 E – A 140 E and AW 25 - A 140Maximum flexibility provided by a range of limit switching concepts

General functions:• Universal with a power supply of 3 x 230/400 V/50 Hz

• Star-Delta commutation can easily be changed to 3 x 230 V

• In single phase 1 x 230 V/50 Hz (AW 35-AW 50)

• Precise definition of end limits

• Plug-in control cable

• Various operating systems: LK, HK, AK

• 25.4 mm and 25/25.4 mm hollow shaft

• Class of protection IP 54

Advantages at a glance:• Compact design

• Location-independent installation

• Very smooth running

• Maintenance-free gear and motor

•Easy setting of the end limits through electronicor mechanical limit switching

• Suitable for door weights up to approx. 780 kg (see load table)

• Suitable for door speeds up to 0.33 m/s (see load table)

Motor Transmission Limit switching

• Interruption of the control current • Worm gear drive Mechanical (MLS) limit switching:in the event of manual activation (A 50 series) • Six final limit positions as standard

• Three-phase or single phase • Worm spur-gear drive • Two operating final limit positionsA.C. Motor (A 150 series)

• Two safety final limit positions• Insulation class H • Worm hardened and ground

• Two final limit positions for special functions•Class of protection IP 54 • Worm gear made of special bronze

• Snap-in quick setting of final limit position cams• Higher class of protection – • Good absorption of impact loads

on request • Fine adjustment with adjusting screws(from A 150 series) • Lifetime lubrication

(maintenance-free) • Installation facilitated by plug-in control cable

• Corrosion-resistant thanks to special Electronic (ELS) limit switching: aluminium alloy • Programmable limit switching from the ground

• Programmable intermediate position

• No setting required on drive

•Simple installation with plug-in control cable with numbering to corresponding terminal numbers incontrols


General Functions


General functions:• No final limit positions (easy to set from the ground)

• Plug-in control cable

• 50 Nm and 70 Nm torque

•Various manual activation systems with light hand chainor hand crank (LK, HK)

• 25.4 mm hollow shaft

• Class of protection IP 54

Your advantages at a glance:• Electronic torque control (DMR)

• No mechanical final limit positions required

• Convenient setting of end limits from the ground, no adjustment of final limit positions necessary

• Automatic adjustment to a subsequent changein opening height

• Sensitive overload detection feature protects the door system and the motor in the event of jamming or overload

• Protection of the bottom pneumatic safety-edge rail

• Automatic correction in the event of stretching of the carrying cables

• Detection of obstacles by DMR control

Motor Transmission Limit switching

• Interruption of the control current • Self-locking and • Programming of end limitsin the event ofmanual activation lifetime lubricated worm

gear drive • No setting of final limit positions• Motor thermally protected

• Torsion-resistant gear • No resetting of final limit positions, e.g. • Class of protection IP 54 housing with good heat after application of screed, tiles or due to

dissipation through finning stretching of the carrying cables• Insulation class H

thermally protected • Increased safety of the door system due • Hollow shaft diameter to detection of obstacles by the torque control

25,4 mm• Path measurement: the travel of the door is

• Corrosion-resistant thanks measured via an incremental encoder positioned to special aluminium alloy on the motor shaft

• Simple installation with plug-in control cable withnumbering to corresponding terminal numbers in controls

A 50 DMR – A 70 DMR Maximum safety thanks to electronic torque control

Load Table


Load table for spring-balanced sectional doors

cylindrical Maximum Door height [m] for Average door speed

Type Moment Cable drum Door weight 13 24 27 [m/s] for drive speed

Revolutions[Nm] ø [mm] [Kg] Final limit position range 20 min-1 25 min-1 29 min-1

AW 25/... 25 102 257 4,1 0,14

134 228 5,4 0,18

146 209 5,9 0,20

165 185 6,7 0,22

203 150 8,2 0,27

216 141 8,8 0,29

AW 50/... 50 102 479 7,6 0,11

134 365 10,0 0,15

146 335 11,0 0,16

165 296 12,4 0,18

203 241 15,2 0,22

216 226 16,2 0,23

A 50/... 50 102 384 4,1 8,6 0,14

134 292 5,4 11,3 0,18

146 268 5,9 12,3 0,20

165 237 6,7 13,9 0,22

203 193 8,2 17,2 0,27

216 181 8,8 18,3 0,29

A 70/... 70 102 419 4,1 8,6 0,14

134 319 5,4 11,3 0,18

146 293 5,9 12,3 0,20

165 259 6,7 13,9 0,22

203 210 8,2 17,2 0,27

216 198 8,8 18,3 0,29


Load Table


The static holding moment permissible in accordance with the guidelines of EN 12453 or ZH1/494 has been taken into account in the door weights.

cylindrical Maximum Door height [m] for Average door speed

Type Moment Cable drum Door weight 13 24 27 [m/s] for drive speed

Revolutions[Nm] ø [mm] [Kg] Final limit position range 20 min-1 25 min-1 29 min-1

A 80/... 80 102 479 7,6 0,16

134 365 10,0 0,21

146 335 11,0 0,23

165 296 12,4 0,26

203 241 15,2 0,31

216 226 16,2 0,33

A 90/... 90 102 539 7,6 0,11

134 410 10,0 0,15

146 377 11,0 0,16

165 333 12,4 0,18

203 271 15,2 0,22

216 254 16,2 0,23

A 130/... 130 102 779 7,6 0,16

134 593 10,0 0,21

146 544 11,0 0,23

165 481 12,4 0,26

203 391 15,2 0,31

216 368 16,2 0,33

A 140/... 140 102 779 7,6 0,11

134 593 10,0 0,15

146 544 11,0 0,16

165 481 12,4 0,18

203 391 15,2 0,22

216 368 16,2 0,23

Load table for spring-balanced sectional doors

Series

A 50

A 150

PerformanceData


Performance data for spring-balancedsectional doors

Doub

le-s

tage

gea

rSi

ngle

-sta

ge g

ear

Limit Designation Item No. Torque Speed Hollow shaft-ø Voltage [V]/switching

[Nm] [min-1] [mm] Frequenzy [Hz]MLS AW 25/25 LK 2341 146 600 0

HK 2341 117 600 0AK 2341 136 600 0AK/RK 2341 164 600 0

A 50/25 LK 2340 146 600 0HK 2340 117 600 0AK 2340 136 600 0AK/RK 2340 164 600 0

A 70/25 LK 2343 146 600 0HK 2343 117 600 0

DMR A 50 DMR/25 LK 2345 146 600 0HK 2345 117 600 0

A 70 DMR/25 LK 2346 146 600 0HK 2346 117 600 0

ELS A 50 E/25 LK 2347 146 600 0HK 2347 117 600 0

A 70 E/25 LK 2348 146 600 0HK 2348 117 600 0

MLS AW 50/20 LK 2351 169 000 0HK 2351 117 000 0AK 2351 136 600 0

A 80/29 LK 2353 146 600 0HK 2353 117 000 0AK 2353 136 000 0

A 90/20 LK 2353 169 600 0HK 2353 117 100 0AK 2353 136 100 0

A 130/29 LK 2355 146 600 0HK 2355 117 000 0AK 2355 136 000 0

A 140/20 LK 2355 169 600 0HK 2355 117 100 0AK 2355 136 100 0

ELS A 80 E/29 LK 2373 146 600 0HK 2373 117 000 0

A 90 E/20 LK 2373 169 600 0HK 2373 117 100 0

A 130 E/29 LK 2375 146 000 0HK 2375 117 000 0

A 140 E/20 LK 2375 146 100 0HK 2375 117 100 0

25

50

70

50

70

50

70

50

80

90

130

140

80

90

130

140

25

25

25

25

25

25

25

20

29

20

29

20

29

20

29

20

25,4

25,4

25,4

25,4

25,4

25,4

25,4

25/25,4

25/25,4

25/25,4

25/25,4

25/25,4

25/25,4

25/25,4

25/25,4

25/25,4

230V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 400V/50HZ

3x 400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

230 V /50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

3x 230/400V/50HZ

Series

A 50

A 150


PerformanceData


Doub

le-s

tage

gea

rSi

ngle

-sta

ge g

ear

Limit Designation Rate current Rate power Final limit position range Operating

switching [A] of motor [kW] (revolutions)

MLS AW 25/25 LK 2341 146 600 0HK 2341 117 600 0AK 2341 136 600 0AK/RK 2341 164 600 0

A 50/25 LK 2340 146 600 0HK 2340 117 600 0AK 2340 136 600 0AK/RK 2340 164 600 0

A 70/25 LK 2343 146 600 0HK 2343 117 600 0

DMR A 50 DMR/25 LK 2345 146 600 0HK 2345 117 600 0

A 70 DMR/25 LK 2346 146 600 0HK 2346 117 600 0

ELS A 50 E/25 LK 2347 146 600 0HK 2347 117 600 0

A 70 E/25 LK 2348 146 600 0HK 2348 117 600 0

MLS AW 50/20 LK 2351 169 000 0HK 2351 117 000 0AK 2351 136 600 0

A 80/29 LK 2353 146 600 0HK 2353 117 000 0AK 2353 136 000 0

A 90/20 LK 2353 169 600 0HK 2353 117 100 0AK 2353 136 100 0

A 130/29 LK 2355 146 600 0HK 2355 117 000 0AK 2355 136 000 0

A 140/20 LK 2355 169 600 0HK 2355 117 100 0AK 2355 136 100 0

ELS A 80 E/29 LK 2373 146 600 0HK 2373 117 000 0

A 90 E/20 LK 2373 169 600 0HK 2373 117 100 0

A 130 E/29 LK 2375 146 000 0HK 2375 117 000 0

A 140 E/20 LK 2375 146 100 0HK 2375 117 100 0

Performance data for spring-balanced sectional doors

13

13

13

27

27

1-13

1-13

24

24

24

24

24

2-24

2-24

2-24

2-24

S2-5 min

S3-40 %

S3-40 %

S2-4 min

S2-4 min

S3-40 %

S3-40 %

S2-5 min

S3-40 %

S3-40 %

S3-40 %

S3-40 %

S3-40 %

S3-40 %

S3-40 %

S3-40 %

3,3

2,5/1,4

3,8/2,2

1,8

2,2

2,5/1,4

3,8/2,2

3,3

2,9/1,7

2,9/1,7

3,8/2,2

3,8/2,2

2,9/1,7

2,9/1,7

3,8/2,2

3,8/2,2

0,26C=40 µF

0,36

0,52

0,36

0,52

0,36

0,52

0,26C=25 µF

0,36

0,36

0,52

0,52

0,36

0,36

0,52

0,52

Series

A 50

A 150

PerformanceData


Doub

le-s

tage

gea

rSi

ngle

-sta

ge g

ear

MLS AW 25/25 LK 2341 146 600 0HK 2341 117 600 0AK 2341 136 600 0AK/RK 2341 164 600 0

A 50/25 LK 2340 146 600 0HK 2340 117 600 0AK 2340 136 600 0AK/RK 2340 164 600 0

A 70/25 LK 2343 146 600 0HK 2343 117 600 0

DMR A 50 DMR/25 LK 2345 146 600 0HK 2345 117 600 0

A 70 DMR/25 LK 2346 146 600 0HK 2346 117 600 0

ELS A 50 E/25 LK 2347 146 600 0HK 2347 117 600 0

A 70 E/25 LK 2348 146 600 0HK 2348 117 600 0

MLS AW 50/20 LK 2351 169 000 0HK 2351 117 000 0AK 2351 136 600 0

A 80/29 LK 2353 146 600 0HK 2353 117 000 0AK 2353 136 000 0

A 90/20 LK 2353 169 600 0HK 2353 117 100 0AK 2353 136 100 0

A 130/29 LK 2355 146 600 0HK 2355 117 000 0AK 2355 136 000 0

A 140/20 LK 2355 169 600 0HK 2355 117 100 0AK 2355 136 100 0

ELS A 80 E/29 LK 2373 146 600 0HK 2373 117 000 0

A 90 E/20 LK 2373 169 600 0HK 2373 117 100 0

A 130 E/29 LK 2375 146 000 0HK 2375 117 000 0

A 140 E/20 LK 2375 146 100 0HK 2375 117 100 0

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

IP 54

10

10

10

10

10

10

10

11

10

10

11

11

10

10

11

11

Limit Designation Item No. Class of Weight Drawing

switching protection [kg] see

Cata

logu

e pa

ge 1

3Ca

talo

gue

page

14

Performance data for spring-balanced sectional doors


DimensionalDrawings


106

100

218

175

47.5

60

120

53

47.5

60

A 70 - 440

A 50 - 420

LK (light hand chain)

120

60

47.5

60 47.5

175

100

218

53

A 70 - 332

A 50 - 312

HK (hand crank)

218

100

175

47.560

120312

47.5

60

53

131

AK and AK+RK (disconnecting clutch and disconnecting clutch+slipping clutch)

M 86.35

25.45

27.685

Hole pattern, A 50 series

Dimensional drawings, A 50 series

DimensionalDrawings


Dimensional drawings A 150 series

M

JS96.35

JS98

25.4

1616

.25

85

8

Hole pattern,A 150 series

18106

208

58

320

131.

560

42.5435

96

LK (light hand chain)

96

96

105

131.

560

58

42.5

18

325

208

HK (hand crank)

325

96

131.

560

42.5

58

52.5

18105

148

96

116

AK (disconnecting clutch)

Item no. VTKT SE000100DEB

Door Drives CatalogueHigh Speed DoorDrives Product Range

For us, quality is an all-embracing company philosophy – the sum ofall activities within our company’s value chain. This applies just asmuch to innovative product development and training as it does toconsultation and service. And, it goes without saying that for us atBECKER quality also means compliance with essential internationalstandards, such as DIN ISO EN 9001 or the European CE marking.

But we go far beyond this.

Perhaps this is why we have succeeded in developing into an interna-tional family-run company in the space of eight decades. We arecommitted to shaping the future by setting new standards inhigh-quality technology – with the help of creativity and innovation.In this sense, we see the products on the following pages as the resultof our prevailing company maxims, and we will be delighted if theycan also contribute to the success of your business.

If you would like to find out more about the quality of our broadproduct range, or are interested in particular products, please donot hesitate to contact us on:

Telephone +49 (0) 27 72/5 07-0 Fax +49 (0) 27 72/5 07-151


„For us, quality is not just aboutproducts. It’s a way of thinking”

FU 750; Page 2

Item No. VTKTTA186001DEB

The FU 750 frequency converter andWSTE 1000 FU control for door drives

Sectional and PVC doors with conventional drive technology aresubjected to extreme forces during quick acceleration and deceleration.If you want to prevent mechanical damage and at the same time reducedoor running times, this can be achieved using variable door runningspeeds with converter technology. BECKER offers an attractive drivesystem and a control with a high- performance frequency converter,tailored specifically to these requirements in the door sector. Thefrequency converter varies voltage and frequency, so that the drive

runs at variable speed, door running times are minimised and themechanism is protected against excessive wear. This results in smooth,gentle door movements, as the drive accelerates and decelerates gently.The many different setting options of the converter allow optimaladaptation to the relevant door system.

Application:• Sectional doors• High speed PVC doors

General functions:• Variable door speed• Gentle starting and stopping (acceleration and deceleration)• Up to four adjustable ramp times can be selected• Monitoring of electrical and pneumatic

bottom safety edge rails• Adjustable automatic re-closing feature• Duplex traffic control with red/green traffic light• Input for UP-STOP-DOWN light barrier• 24 V output for light barrier supply• 1-channel or 4-channel radio, can be retrofitted• Membrane switch with integrated UP-STOP-DOWN function keys• Cycle counter• Display of special functions and safety stop• Error display• Compact housing• Parameters easily copied to suitable door systems

The advantages at a glance:• Minimal space requirement• Compact construction• Location-independent installation• Very high door speeds

thanks to converter technology• Longer service life of door system thanks to

gentle acceleration and deceleration• Power feed: single-phase alternating current• Energy saving due to short opening and

closing cycles• Lower stress on all mechanical

components• Longer service life• Diverse setting options

Available as drive system:Special drive (from the BECKER modular system)+ FU 750 + WSTE 1000 FU control

BECKER – it’s that easy.

FU 750; page 3

High SpeedDoor Drives

Advantages at a glance

We recommendHigh-speed sectional door drives Drive Control

A 45/52 LK WSTE 1000 FU

A 65/40 LK WSTE 1000 FU

A 90/40 LK WSTE 1000 FU

High-speed PVC door drives Drive Control

A 35/112 LK WSTE 1000 FU

A 50/112 LK WSTE 1000 FU

FU 750; page 4

A 35 - A 90 FU

Motor

• Three phase current 3 x 230/400 Vwith lifetime lubrication

• Automatic interruption of controlcurrent in the event of manualactivation

• Integrated sliding armature brake for high deceleration capacity

• Motor thermally protected by fins

• Protection class IP 54 – higherprotection class available on request

Transmission

• Worm spur-gear drive

• High load alternation possible thanksto two-stage gear design

• Impact load is well absorbed bytwo-stage gear

• Torsion-resistant gear housing withgood heat dissipation

• Hollow shaft diameters are designedfor the transverse strength and torsionresistance of the weld shafts

Limit stop

• 6 final limit positions as standard

• 2 operating final limit positions,2 safety final limit positions,2 pre-limit switches

• Easy installation with plug-in cable

• Snap-in quick settingof final limit position cams

• Fine adjustment with adjusting screws



High SpeedDoor DrivesA 35 - A 90 FU

Sectional doorA 45 FU - A 90 FU• Door speeds up to 1 m/s with spring balancing

or counterweights

• Frequency up to 80 Hz

• Output speed up to 83 min-1

• Opening acceleration times from 0.5 s

• Opening deceleration times from 0.5 s

• Closing acceleration times from 0.5 s

• Closing deceleration times from 0.5 s

• Emergency stop via dual chamber rubber edgeor leading light barrier

• Protective light barrier should be present

• Actuation commands: Radio, induction loop,radar, infrared

Electrical drives have become an important and defining constituentof many machines and doors. Their behaviour has a considerableinfluence on product quality and costs!

In order to adapt the drives to optimal production conditions,speed-variable drive solutions are required.

When designing a drive for a door system, the characteristics of thedoor system form the focus of attention.

These characteristics determine the selection and design of the drivesolution. The power requirement and door speed are essential requirements. As regards the drive, torque and speed are the determining factors.

High-speed PVC doorA 35 FU - A 50 FU• Door speeds up to 1 m/s with spring balancing

or counterweights

• Frequency up to 100 Hz

• Output speed up to 224 min-1

• Acceleration times from 0.2 s

• Deceleration times from 0.2 s

• Emergency stop via dual chamber rubber edgeor leading light barrier

• Protective light barrier should be present

• Actuation commands: Radio, induction loop, radar, infrared, higher level system commands(clock frequencies)

FU 750; Page 5

Information on application areas of frequency converter technology


FU 750; page 6

Cylindrical Door speed max.Type Torque cable drum Door weight (m/s) from (m/s) to

[Nm] [mm] [Kg] 50 Hz 60 HzA45/52 45 102 359 0,28 0,42

134 273 0,37 0,55146 251 0,40 0,60203 180 0,56 0,83216 169 0,59 0,89235 156 0,64 0,96250 146 0,69 1,03280 131 0,77 1,15300 122 0,82 1,23350 104 0,96 1,43

A65/40 65 102 454 0,22 0,33134 346 0,29 0,43146 317 0,31 0,46203 228 0,43 0,64216 214 0,46 0,68235 197 0,50 0,74250 185 0,53 0,79280 165 0,59 0,88300 154 0,63 0,95350 132 0,74 1,10

A90/40 90 102 539 0,22 0,33134 410 0,29 0,43146 377 0,31 0,46203 271 0,43 0,64216 254 0,46 0,68235 234 0,50 0,74250 220 0,53 0,79280 196 0,59 0,88300 183 0,63 0,95350 157 0,74 1,10

A35/112 35 102 223 0,60 0,90134 170 0,79 1,18146 156 0,86 1,29203 112 1,19 1,79216 105 1,27 1,90235 97 1,38 2,07250 91 1,47 2,20280 81 1,65 2,47300 76 1,76 2,64350 65 2,06 3,08

A50/112 50 102 349 0,60 0,90134 266 0,79 1,18146 244 0,86 1,29203 175 1,19 1,79216 165 1,27 1,90235 151 1,38 2,07250 142 1,47 2,20280 127 1,65 2,47300 118 1,76 2,64350 101 2,06 3,08

The statically permissible holding moment has been taken into account in door weights.

Load table


High SpeedDoor DrivesTechnical data

Designation Rated current Power Final limit Opertating Protection Max. arresting Weightposition range mode class moment

(A) (KW) (KG)

A 45/52 LK-FU 4,2 1,10 20 S3 - 40 % IP 54 - 11

A 65/40 LK-FU 4,2 1,10 20 S3 - 40 % IP 54 - 11

A 90/40 LK-FU 4,0 1,22 20 S3 - 40 % IP 54 - 11

A 35/112 LK-FU 2,4 0,85 20 S3 - 40 % IP 54 - 11

A 35/112 AK-FU 2,4 0,85 20 S3 - 40 % IP 54 - 11

A 50/112 LK-FU 4,2 0,88 24 S3 - 40 % IP 54 - 11

Structure of the article designation

FU 750; page 7

Designation Item no. Torque Speed Voltage/Frequency Hollowshafts-0

(Nm) (min-1) (V/Hz) (mm)

A 45/52 LK-FU 2360 105 000 0 45 52,0 3 x 230 V/50 Hz 25/25,4

A 65/40 LK-FU 2361 102 000 0 65 38,7 3 x 230 V/50 Hz 25/25,4

A 90/40 LK-FU 2362 102 000 0 90 38,7 3 x 230 V/50 Hz 25/25,4

A 35/112 LK-FU 2363 102 000 0 35 112,0 3 x 230 V/50 Hz 30

A 35/112 AK-FU 2363 103 000 0 35 112,0 3 x 230 V/50 Hz 30

A 50/112 LK-FU 2364 102 000 0 50 112,0 3 x 230 V/50 Hz 30

Example Structural shape of drive: Manual actuation systems:

A = Direct mount drive LK = Light hand-chain

AF = Integrated fall arrester HK = Hand crank

R = Tubular motor LHK = Long hand crank

AW = Alternating current AK = Disconnecting clutch

E = Electrical limit switching AKRK = Disconnecting clutch and slipping clutch

A 45/52 LK-FU

Manual actuation system

Output speed 1/min.

Torque Nm

Structural shape

Drive frequency converter

High SpeedDoor Drives FU dimensional drawings

A 45 FU-LK—A 90 FU-LK

A 35 FU-LK—A 50 FU-LK

FU 750; page 8


Door Control Cataloguefor BECKER Door Drives

Content

Door Control Catalogue, Page 3

ContentAbout us / Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

1. S 10 and S 10 AF door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

2. S 50 II door control with „dead man’s“ insert card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6

3. S 60 II door control with „dead man’s“ insert card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

4. S 60 II AF door control, 4.1 Multicard II insert card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

5. S 80 door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 95.1 MLS- and ELS-Professional insert cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10

6. WSTE 1000 door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 11

7. WSTE 1000 FU door control, programming device for frequency converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12

8. S 100 DMR door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13

9. S 300 DMR door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

10. Beck-O-Tronic 4 door control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 15

Item No. VTKT ST000020DEN


Roller and sectional doors, roller grids, high-speed doors and manymore – the application possibilities for door controls are almost limitless.Just like our range of control solutions: BECKER offers a broad selectionof controls to suit every industrial application. You will find BECKERdoor controls designed for BECKER drives with three-phase and alternating current, with torque control and frequency converters. Theyalso meet the most exacting standards with regard to convenience andsafety. Our vast array of controls extends from „dead man’s“ to self-locking features, through radio extension to duplex traffic control. Or

you can choose one of our other controls, which can be extended byradio – such as our S 100 DMR and S 300 DMR controls for drives withtorque control. Whichever control you select, we will be delighted toprovide you with professional advice and a personal quotation. Give usa call – we look forward to hearing from you!

Overview of BECKER door controls

S 10 . . . . . . . . . . . . . . . . . . . . . . .”Dead man’s“ control

S 50 II . . . . . . . . . . . . . . . . . . . . .Control for „dead man’s operation” or operation in self-locking (with Multicard II)

S 60 . . . . . . . . . . . . . . . . . . . . . . .Control for „dead man’s operation“ or operation in self-locking (with Multicard II),can be extended with radio

S 80 . . . . . . . . . . . . . . . . . . . . . . .Control for „dead man’s operation” or operation in self-locking for drives withmechanical or electronic limit switching, can be extended with radio

S 100 DMR und S 300 DMR . . .Control for drives with torque control, can be extended with radio

WSTE 1000 . . . . . . . . . . . . . . . . .Duplex traffic control, can be extended with radio

WSTE 1000 FU . . . . . . . . . . . . . .Duplex traffic control for high-speed doors, can be extended with radio

Beck-O-Tronic 4 . . . . . . . . . . . . .Door control for tubular drives, modular extension with radio and safety switching rail evaluator

Door control - easier than ever before

BECKER – it's that easy.


Illustration Designation/Item No. Type Function

S 10 door control Surface-mounted • DOWN in dead man’s4023 000 201 0 Class of protection: IP 65 • UP in self-locking / or in „dead man’s“

Plastic housing • Connection for external triple push-buttonDimension (W x H x D):110 x 180 x 90 mm3 x 230/400 V, 50-60 Hz

1 x 230 V, 50 Hz with capacitor module(Electrical AccessoriesCatalogue)Drive capacity:max. 2,2 kWControl voltage: 230 V

S 10 door control As above, but with triple as abovewith triple push-button push-button integrated into 4023 000 202 0 the front panel

Class of protection: IP 54(IP 65 optional)

S 10 AF door control As above, but with triple • DOWN in dead man’s modewith triple push-button push-button integrated into • UP in self-locking / or in „dead man’s“and braking module the front panel • Relay output with change-over contacts4023 000 205 0 Dimension (W x H x D): • Integrated braking module for control of an external motor

180 x 182 x 90 mm brake for BECKER roller door drives AF450-AF7503 x 400 V, 50-60 HzControl voltage:24V/DC

Door ControlS 10

Application: For the operation of roller and sectional doors in conjunction with BECKER door drives in „dead man’s” mode.

1. BECKER - door control S 10



Door ControlS 50 II

Application: For the operation of roller and sectional doors in conjun-ction with BECKER door drives in „dead man’s” mode with „dead man’s”insert card or with „Multicard II“ insert card for operation in self-locking.In conjunction with the Multicard II, the S 50 II door control offers amultitude of additional functions, such as, for example, the use of bot-

tom safety-edge rail systems. Thus it enables both ascent anddescent in self-locking mode, making it suitable even for the mostdemanding applications in conjunction with BECKER door drives in door systems used in the industrial sector.

2. BECKER S 50 II door control


Basic version Surface-mounted • Integrated UP, STOP, DOWN function keyS 50 II door control Class of protection: IP 54 • DOWN in „dead man’s“ / UP either in „dead man’s“ or self- 4023 000 020 0 (IP 65 optional) locking

Plastic housing • Cycle counter (optional - can be fitted at the factory)

An insert card Dimension (W x H x D): • Potential-free relay output (change-over contact, 5 A)4023 200 601 0 180 x 182 x 90 mmis required for Connections for:„dead man’s” 3 x 230/400 V, 50 - 60 Hz • Automatic reclosing feature (in conjunction with Multicard II)operation • Pulsed input point (UP, STOP, DOWN, STOP,...)

(in conjunction with Multicard II)• External triple push-button• External EMERGENCY STOP and slack cable switch

1 x 230 V, 50 Hz • Entry door switchwith capacitor module • Bottom safety-edge rail systems;(Electrical Accessories pneumatic, electrical or optical switching rail (Fraba) Catalogue) (in conjunction with Multicard II)Drive capacity • 230 V light barrier (in conjunction with Multicard II)max. 2,2 kW

Retrofittable:Control voltage: • EMERGENCY STOP button integrated into housing cover or24 V/DC lockable EMERGENCY STOP button - optional, on request

• Can be extended with Multicard II insert card (replacement ofMechanically locked „dead man’” insert card with Multicard II insert card withreversing contractor additional functions, see description of Multicard II)

Door ControlS 60 II


Application: For the operation of roller and sectional doors in conjunctionwith BECKER door drives in „dead man’s” mode with „dead man’s” insert card, or for operation in self-locking mode with the „MulticardII“ insert card. Like the BECKER S 50 II door control, the S 60 II canalso be extended with the Multicard II. In addition to the specified

functions, a slot is also provided for a 1-channel radio receiver. Thisoption and/or the use of a 24 V light barrier make the BECKER S 60 IIdoor control, in conjunction with BECKER door drives, an ideal solutionfor the operation of industrial door systems.

3. BECKER S 60 II door control


Basic version Surface-mounted • Integrated UP, STOP, DOWN function keyS 60 II door control Class of protection: IP 54 • DOWN in „dead man’s“ / UP either in „dead man’s“

(IP 65 optional) or self-locking• Cycle counter (optional - can be fitted at the factory)

4023 000 611 0 Plastic housing • Potential-free relay output (change-over contact, 5 A)Dimension (W x H x D): • Voltage output: 24 V DC/200 mA

An insert card 182 x 254 x 90 mm e.g. for light barrier4023 200 602 0is required for 3 x 230/400 V, 50 Hz Connections for:operation in • Automatic reclosing feature (in conjunction with Multicard II)„dead man’s” • Pulsed input point (UP, STOP, DOWN, STOP,...)

(in conjunction with Multicard II)• External triple push-button

1 x 230 V, 50 Hz • External EMERGENCY STOP and slack cable limit switchwith capacitor module • Entry door switch(Electrical Accessories • Run-in safety device (STOP in UP direction) Catalogue) • Bottom safety-edge rail systemsDrive capacity: pneumatic, electrical or optical switching rail (Fraba)max. 2,2 kW (in conjunction with Multicard II)

• 24 V light barrier (in conjunction with Multicard II)Control voltage:24 V/DC Retrofittable:

• EMERGENCY STOP button integrated into the housing Mechanically locked cover or lockable EMERGENCY STOP buttonreversing contractor • Main switch integrated into housing cover

• All-pole safety cut-off(in accordance with SUFA and Ö-Norm, optional)

• Can be extended with insert card (replacement of „dead man’s“ insert card withMulticard II insert card with additional functions, seedescription of Multicard II)

• 1-channel radio receiver, plug-in (in conjunction with Multicard II)


S 60 II AF door control As S 60 II As S 60 II, but with integrated braking module for 4023 000 612 0 operation of an external motor brake

for BECKER roller door drives AF 450 - AF 750


Multicard II Compatible with • Evaluation and monitoring of an electrical or4023 200 040 0 S 50 II, S 60 II, S 60 II AF pneumatic switching rail with terminal resistanceFor operation in 1.2 or 8.2 k�

self-locking • Evaluation of an optical switching rail (Fraba)• Evaluation of a 24 V light barrier at ground level• Self-locking ( UP / DOWN )• Running time monitoring• Yard light or alarm light with various functions

(pulsed / permanent light)• Second opening height• Automatic reclosing feature, adjustable• Settable reversing in bottom end limit position

(relief of switching rail)• Pulsed input point (UP, STOP, DOWN, STOP,...)• Error code display and functional analysis

4.1 Multicard II insert cardApplication: For retrofitting to the BECKER door control S 50 II, S 60 II, S 60 II AF.

Door Control S 60 II AF



Application: For operation of BECKER door drives, sizes AF 450 – AF 750 (drives with braking module).

4. BECKER S 60 II AF door control


Door Control S 80

Application: For operation of roller and sectional doors in conjunctionwith BECKER door drives with mechanical limit switching (MLS card)or electronic limit switching (ELS card). In conjunction with the MLS-or ELS-Professional insert card, the BECKER S 80 door control providesa multitude of additional application options. In addition to the specified functions, a slot is also provided for a 1- or 4-channel radioreceiver. With this option and/or the use of a light barrier, the BECKERS 80 door control, in conjunction with BECKER door drives, makes the

operation of industrial door systems easy and convenient. In addition,the S 80, in conjunction with an ELS-Professional insert card, is characterised by maximum user-friendliness: the final limit positionsof the door are particularly easy to program on BECKER door driveswith electronic limit switching.

5. BECKER S 80 door control


Basic version Surface-mounted • Integrated UP, STOP, DOWN function keyS 80 door control Class of protection: IP 54 • DOWN in „dead man’s“ / UP either in „dead man’s“ or4023 000 802 0 (optional IP 65) self-locking

Plastic housing • Cycle counter (optional - can be fitted at the factory)Dimensions (W x H x D): • 2 potential-free relay outputs (change-over contacts, 5 A)

An MLS basic insert card 182 x 254 x 90 mm • Voltage output: 24 V DC/200 mA is required for e.g. for light barrier or code lock„dead man’s“ operation 3 x 230/400 V, 50-60 Hz4023 200 802 0 Connections for:

1 x 230 V, 50 Hz • Automatic reclosing featurewith capacitor module • Pulsed input point ( UP, STOP, DOWN, STOP,...)(Electrical Accessories • External triple push-buttonCatalogue) • Internal or external EMERGENCY STOPDrive capacity: • Slack cable switch, de-bouncedmax. 2,2 kW • Run-in safety device (stop in UP direction)

• Entry door switch Control voltage: • Bottom safety-edge rail systems; 24 V/DC pneumatic, electrical or optical

switching rail (Fraba)Mechanically locked • Light barrier, e.g. 24 Vreversing contractor

Retrofittable:• EMERGENCY STOP button integrated into housing cover

or lockable EMERGENCY STOP button or main switch• Can be extended with MLS-Professional or ELS-

Professional insert card (for additional functions, see description of „Professional“ cards)

• 1- or 4-channel radio receiver, plug-in(in conjunction with „Professional“ cards)


For operation of Insert cards compatible • Self-locking UP / DOWNBECKER door drives with S 80 door control • Evaluation and monitoring of an electrical or with mechanical limit - pneumatic switching rail with terminal resistanceswitching in 1.2 or 8.2 k�

self-locking • Evaluation of an optical switching rail (Fraba)• Evaluation of a 24 V light barrier at ground level

Insert card MLS-Professional • Evaluation of a 1- or 4-channel radio signal4023 000 804 0 (1-channel: UP, STOP, DOWN or 4-channel: defined commands)

• Running time monitoring• Yard light or alarm light with various functions

(pulsed or permanent light) as well as door status display• Second opening height• Automatic reclosing feature (settable with time module)• Reversing in bottom final limit position

(relief of switching rail)• Pulsed input point (UP, STOP, DOWN, STOP,...)• Error code display and functional analysis

or

For operation of As above Functions as aboveBECKER door drives with electronic limit switchingin self-locking

ELS-Professional insert card4023 000 803 0

For easy programmingof end limits

Application: For retrofitting to the BECKER S 80 door control.

5.1 MLS-Professional and ELS-Professional insert cards

Door Control S 80

Item No. BTKT ST000050DEN

Door Control Catalogue, page 10


WSTE 1000 door control Surface-mounted • Triple membrane keyboard UP, STOP, DOWNwith membrane keyboard Class of protection: IP 64 • Keyswitch for half-opening height4019 000 161 0 (DW) Plastic housing • Evaluation and monitoring of an electrical or4019 000 162 0 (EL) Dimensions (W x H x D): pneumatic switching rail with

255 x 180 x 90 mm terminal resistance 1.2 k�

• Evaluation of a 24 V light barrier at ground level3 x 400 V, 50-60 Hz • Evaluation of a 1- or 4-channel radio signal

(1-channel: UP, STOP, DOWN or 4-channel: defined commands)Drive capacity: • Second opening heightmax. 1,5 kW • Pulsed input point (UP, STOP, DOWN, UP...)

• Cycle counterControl voltage: • Function or diagnostic display24 V/DC • Error code display

• Pulsed input pointContactless reversing control (UP-STOP-DOWN external / UP-STOP-DOWN internal)

• Adjustable reclosing time (8-200 sec.)• Aux voltage output: 24V DC/100 mA

e.g. for light barrier• 4 relay outputs for 2 red/green traffic lights

(duplex traffic control) orWSTE 1000 door control As above, but Impulse for automatic illumination and door status displaySingle phase 1 x 230 V, 50 Hz4019 000 316 0 (DW) Connections for:4019 000 321 0 (EL) For BECKER drives • External triple push-button

Single phase • External EMERGENCY STOP buttonAW 40 – AW120 • Slack cable switch, temporally de-bounced

• Entry door switch• Run-in safety device (STOP in UP direction)• Triple push-button (UP inside, STOP, DOWN)• Bottom safety-edge rail system

(electrical or pneumatic rail)• Light barrier, e.g. 24 V


or lockable EMERGENCY STOP button• 1- or 4-channel radio receiver (plug-in)*

* If using a duplex traffic light in conjunction with radio operation,

a 4–channel radio receiver must be used.

Door ControlWSTE 1000


Application: For operation of roller and sectional doors in conjunctionwith BECKER door drives. With its duplex traffic control, evaluation ofbottom safety-edge rail systems, plug-in 4-channel radio receiver and

other functions, the BECKER WSTE 1000 represents a high-quality door control with many advantages.

6. BECKER WSTE 1000 door control

Application: For operation of roller and sectional doors in conjunctionwith BECKER door drives with frequency converter technology. Inaddition to the „duplex traffic control” function and evaluation ofbottom safety-edge rail systems, the WSTE 1000 FU can also be extended

with a 4-channel radio receiver. Use of the BECKER WSTE 1000 FUdoor control in conjunction with BECKER door drives with FU technologyalso enables variable and higher door speeds.

7. WSTE1000 FU door control


WSTE 1000 FU door control As WSTE 1000 As WSTE 1000, but with 4019 000 908 0 (DW) but frequency converter technology for:4019 000 909 0 (EL) 1 x 230 V, 50 Hz

• Higher door speeds• Considerably lower energy consumption

In conjunction with BECKER Module for fitting to WSTE thanks to shorter opening and closing timesfrequency converter 1000 FU door control • Preservation and longer service life of the entire 4019 200 078 0 in shielded housing door system

• Optimal adjustment to any door system throughvariable door speeds

Dimensions (W x H x D): • Quick and easy programming800 x 120 x 80 mm

Connections for: • External triple push-button• External EMERGENCY STOP push-button• Slack cable switch, temporally debounced• Entry door switch• Run-in safety device (STOP in UP direction)• Triple push-button (UP internal, STOP, DOWN)• Bottom safety-edge rail system

(electrical or pneumatic edge)• 24 V light barrier


or lockable EMERGENCY STOP button• 1- or 4-channel radio receiver (plug-in)*

Programming device for Programming device For programming door-specific setting conditionsfrequency converter can be mounted on4019 200 076 0 WSTE 1000 FU door • Adaptation to door type (sectional, roller or leaf door)

control • Variable speed setting for ascent, descent and creep mode

• Programmed data can be transferred to otherBECKER FU units

• FU programming device can also be used as service module, cycle display

• Safety code to protect against improper operation. This means that load limits cannot be exceeded.

* If using a duplex traffic light in conjunction

with radio operation, a 4–channel radio receiver must be used.

Door ControlWSTE 1000 FU



Door ControlS 100 DMR


Application: For operation of spring-balanced sectional doors in con-junction with BECKER door drives with torque control, without final li-mit positions. A single ascent and descent of the door suffices to setthe end limits. If the opening dimensions change, the intelligent DMRcontrol automatically adjusts and regulates the torque requirement.

In addition to the standard bottom pneumatic safety-edge rail, theDMR control stops as soon as any mechanical stress occurs which cau-ses the torque requirement to increase unexpectedly. Any intermedia-te position can be programmed for this purpose.

8. BECKER S 100 DMR door control


S 100 DMR door control Surface-mounted • Integrated function key UP, STOP, DOWN4026 000 001 0 Class of protection: IP54 • End limits and second opening height programmable

(IP 65 optional) • Automatic power adjustmentPlastic housing • Sensitive cut-out in the event of jamming during Dimensions (W x H x D): ascent and descent255 x 180 x 90 mm • Integrated switching rail evaluator for an electrical or

pneumatic switching rail with testing (1.2 / 8.2 k�)3 x 400 V, 50 Hz • Evaluation of a 24 V light barrier at ground level

• Evaluation of a 1- or 4-channel radio signal Control voltage: (1-channel: UP, STOP, DOWN or 4-channel: defined commands)24 V/ DC • Spring monitoring

• Automatic correction of end limits(cable stretching, screed)

• Adjustable automatic reclosing feature• Pulsed input point (UP, STOP, DOWN, STOP,...)• Cycle counter• Error code display• Aux voltage output: 24 V DC/100 mA

e.g. for light barrier

Connections for: • EMERGENCY STOP button• Entry door switch • External triple button, UP, STOP, DOWN• Bottom safety-edge rail system

(electrical or pneumatic edge)• 24 V light barrier• Yard light or alarm light with various functions


or lockable EMERGENCY STOP button• 1- or 4-channel radio receiver (plug-in)


S 300 DMR door control Surface-mounted • Triple membrane keyboard UP, STOP, DOWN4026 000 301 0 Class of protection: IP 64 • Keyswitch for half-opening height

plastic housing • End limits and second opening height programmableDimensions (W x H x D): • Automatic torque control255 x 180 x 90 mm • Sensitive cut-out in the event of jamming

in UP / DOWN direction3 x 400 V, 50 Hz • Spring force monitoring

• Evaluation and monitoring of an electrical orControl voltage: pneumatic switching rail with 24 V/ DC terminal resistance 1.2 k�

• Evaluation of a 24 V light barrier at ground levelContactless reversing control • Evaluation of a 1- or 4-channel radio signal

(1-channel: UP, STOP, DOWN or 4-channel: defined commands)• Second opening height• Pulsed input point (UP, STOP, DOWN, STOP,...)•Cycle counter• Function and diagnostic display• Error code display• Pulsed input point

(UP-STOP-DOWN external / UP-STOP-DOWN internal)• Continuously adjustable reclosing time (5-200 sec.)• Voltage output: 24 V DC/100 mA

e.g. for light barrier• 4 relay outputs for 2 red/green traffic lights

(duplex traffic control) orpulse for automatic illumination and door status display

Connections for: • External triple push-button• External EMERGENCY STOP button• Slack cable switch, temporally debounced• Entry door switch• Run-in safety device (STOP in UP direction)• Triple push-button (UP internal, STOP, DOWN)• Bottom safety edge rail system

(electrical or pneumatic edge)• 24 V light barrier


or lockable EMERGENCY STOP button• 1- or 4-channel radio receiver, plug-in*

* If using a duplex traffic light in conjunction

with radio operation, a 4–channel radio receiver must be used.

Door ControlS 300 DMR



Application: For operation of spring-balanced sectional doors inconjunction with BECKER door drives with torque control, without final limit positions. In addition to the functions already mentioned

for the BECKER S 100 DMR door control, the convenient BECKER S 300DMR door control also has a duplex traffic control, thus meeting anyrequirement.

9. BECKER S 300 DMR door controls

Door ControlBOT 4


Application: For operation of garage roller doors and small industrialroller doors in conjunction with BECKER tubular drives. Starting withthe entry-level version, the modular BECKER Beck-O-Tronic 4 doorcontrol system can gradually be equipped with a wide range of extras,

e.g. a plug-in radio receiver or an evaluator for the bottom safety-edgerail system. The door can be opened from a distance by radio commandand, in conjunction with a 24 V light barrier, it closes automaticallyonce the barrier is interrupted and remade

10. BECKER door controlfor tubular drives: Beck-O-Tronic 4


BOT 4 - basic version Surface-mounted • Membrane keyboard with UP-STOP-DOWN4005 000 027 0 Class of protection: IP 54 button (installation mode incl.)Without radio, without Plastic housing • Aux voltage output 24 V DC/100 mAswitching rail evaluator Dimensions (W x H x D): for light barriers

155 x 130 x 50 mm • Automatic circuit interruption in the end limits on drives with mechanical or electronic limit switching

1 x 230 V – 50 Hz • Four LED’s display operating status anderror messages

Single phase • Yard light or alarm light connectable• Internal radio antenna

Control voltage: • Evaluation of a 1- or 4-channel radio signal24 V / DC (1-channel: UP, STOP, DOWN, STOP,... or

4-channel: defined commands)

Connections for:• External pulse switch• Connection for EMERGENCY STOP and fall arrester• 24 V light barrier

Retrofittable:• Plug-in evaluator for pneumatic, electrical or

optical switching rail (Fraba)• Terminal resistance can be switched

between 1.2 k� and 8.2 k�

• Automatic reclosing feature• Radio receiver module

for 1- and 4-channel operation can be mounted

BOT 4 version for As above As above, but with evaluator for pneumatic,self-locking electrical or optical switching rail (Fraba),4005 000 042 0 terminal resistance can be switched betweenwithout radio, 1.2 k� and 8.2 k�

with switching rail evaluator

BOT 4 full version As above As above, but with radio receiver, 1-channel4005 000 037 0 maxi hand transmitter and evaluator for pneumatic,With radio receiver, electrical or optical switching rail (Fraba),1-channel maxi hand transmitter, terminal resistance can be switched between 1.2 k�

and 8.2 k�

Further versions are available on request!

Catalogue of ElectricalAccessories for BECKERDoor Drives

Catalogue of Electrical Accessories, Page 3

Contents

ContentsAbout us / Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

1. Accessories for BECKER door controls S 10 – S 300 DMR1.1 S 50 II/S 60 II insert cards: Dead man’s card, Multicard II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 51.2 S 80 insert cards: MLS-Basic, MLS-Professional, ELS-Professional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 61.3 BOT-4 insert card, USA evaluator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 61.4 Miscellaneous accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

2. Safety systems2.1 Bottom safety-edge rail systems

• Pneumatic edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8• Electrical edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9• Optical edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 10 - 12

2.2 Switches, buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 132.3 Final limit positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 142.4 Light barriers, run-in safety device, traffic lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

3. Radio components3.1 Plug-in radio receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 153.2 Radio remote controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 163.3 Hand transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 16 - 17

4. External operator’s controls4.1 Switches, buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 19 - 20

5. Connecting cables5.1 Control cables and mains cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 21

Item No. VTKT EZ000020DEN


Whether roller or sectional doors, high speed or garage doors – BECKERoffers a broad range of electrical accessories for all kinds of doorsystems. From safety systems and radio components to externalcontrols – we have an extensive product range that meets therequirements of any application. The choice is yours! Our range of safety systems, for instance, includes:

• Bottom safety-edge rail systems: Pneumatic edgeElectrical edgeOptical edge

• Switches, buttons • Final limit positions• Light barriers, run-in safety device, traffic lights

Whether you choose pneumatic, electrical or optical switching railswith the matching accessories, light barriers, run-in safety device ortraffic lights from BECKER: our safety systems meet the requisiteEuropean safety standards and offer total peace of mind when using

the door system. In addition, our radio components provide maximumconvenience:

• Plug-in radio receivers • Remote controls • Hand transmitters

These state-of-the-art solutions allow convenient opening and clo-sing of the door system, even from a distance.BECKER remote controls are particularly easy to retrofit, irrespective ofwhether the door control has a plug-in slot or not.Our extensive range of electrical accessories for doors is complementedby a large number of external controls: choose from switches, buttons,keyswitch posts and more.

Full range for door systems


Accessories for Door Controls


1.1 Insert cards for S 50 II,S 60 II and S 60 II AF


„Dead man’s” insert card Compatible with • For operating BECKER drives4023 200 602 0 BECKER door control with mechanical limit switching in „dead man’s“ mode

S 50 II / S 60 II /S 60 II AF

Multicard II insert card Compatible with • Self-locking (UP / DOWN)4023 200 040 0 BECKER door control • Evaluation and monitoring of an electrical or

S 50 II / S 60 II / pneumatic switching rail with terminal resistanceS 60 II AF 1.2 or 8.2 k�

• Evaluation of an optical switching rail (Fraba)• Evaluation of a 1-channel radio signal

(UP, STOP, DOWN, STOP,...)• Evaluation of a 24 V light barrier at ground level• Running time control• Yard light or alarm light with various functions

(pulsed/permanent illumination)• Second opening height• Automatic reclosing feature, adjustable• Adjustable reversing in bottom final limit position

(relief of switching rail)• Pulsed input (UP, STOP, DOWN, STOP,...)• Error code display and functional analysis




1.2 Insert cards for S 80 door controlIllustration Designation/Item No. Type Function

MLS-Basic insert card Compatible with • For operating BECKER drives with mechanical limit 4023 200 802 0 S 80 door control switching in „dead man’s“ mode

MLS-Professional insert Compatible with • For operating BECKER drives with mechanical limit 4023 200 806 0 S 80 door control switching in self-locking

• Evaluation and monitoring of an electrical or pneumatic switching rail with terminal resistance1.2 or 8.2 k�

• Evaluation of an optical switching rail (Fraba)• Evaluation of a 24 V light barrier at ground level• Evaluation of a 1- or 4-channel radio signal

(1-channel: UP, STOP, DOWN, STOP,... or4-channel: defined commands)

• Self-locking UP / DOWN• Running time control• Yard light or alarm light with various functions

(pulsed/permanent illumination) and door status display• Second opening height • Automatic reclosing feature, adjustable• Reversing in bottom final limit position

(relief of switching rail)• Pulsed input (UP, STOP, DOWN, UP...) • Error code display and function analysis

ELS-Professional insert card As above As above, but for operating BECKER door drives 4023 200 803 0 with electronic limit switching

Time module Plug-in module for • Time setting from 2 to 240 seconds4023 200 821 0 S 80 door control with MLS- of reclosing time

or ELS-Professional card

1.3 Insert cards for Beck-O-Tronic 4 door controlIllustration Designation/Item No. Type Function

USA insert card Compatible with • For operating BECKER tubular drives with electrical or 4005 000 032 0 BOT 4 door control mechanical limit switching in self-locking

• Evaluation and monitoring of an electrical orpneumatic switching rail with terminal resistance 1.2 or 8.2 k�

• Evaluation of an optical switching rail (Fraba)•Evaluation of a 24 V light barrier at ground level • Self-locking UP / DOWN• Running time control• Automatic reclosing, adjustable



1.4 Miscellaneous accessoriesIllustration Designation/Item No. Type Function

Cycle counter S 50 II/ Electromechanical Counts up by one decimal place when the door opensS 60 II / S 80 counter (optional - integrated at the factory on request)4500 510 051 0

„Ö-Norm“ module For S 60 II door control For retrofitting to S 60 door control 4023 200 616 0 acc. to „Ö-Norm“ and SUFA

Capacitor module 25 Surface-mounted Generation of an auxiliary winding for 1-phase4023 200 023 0 Class of protection: IP 65 direct mount drives (230 V – AW...)

Plastic housingFor connecting 1-phase BECKER drives to control

Dimensions (W x H x D): S 10, S 50 II, S 60 II, S 80, WSTE 1000110 x 180 x 90 mm

with operating capacitor 25�F

Capacitor module 40 As above, but with As above4023 200 039 0 Operating capacitor 40 �F

Capacitor module 50 As above, but with As above4023 200 024 0 Operating capacitor 50 �F

Expansion switch box Surface-mounted For WSTE 1000for WSTE 1000 Class of protection: IP 654019 200 051 0 Plastic housing Incl. 35 mm DIN rail for mounting

Dimensions (W x H x D): e.g. a control computer255 x 180 x 90 mm

Final limit positions Incl. 10 m cable For connecting to controlprogramming handset S 10, S 50 II, S 60 II, S 60 II AF, S 804023 200 027 0

SafetySystems


Application: For pneumatic protection of main closing edge in conjunction with S 50 II – S 300 DMR door control.

2.1 Bottom safety-edge rail system:Pneumatic edge


Pneumatic assembly set 1 Complete with: For protection of the main closing edge4903 000 127 0 •Pneumatic switch on roller and sectional doors

• Helix cable, 2-wire• Assembly accessories• Closing stopper• Pressure hose

Pneumatic assembly set 2 Complete with: For protection of the main closing edge of4903 000 128 0 •Pneumatic switch sectional doors with entry door

• Helix cable, 4-wire• Assembly accessories• Closing stopper• Pressure hose

Rubber profile edge Rubber profile (running meter) For protection of the main closing edgeSingle chamber system Pneumatic single-chamber system in conjunction with pneumatic contact switch4903 000 130 0 W x H: 20 x 20.5 mm

Connector strip Galvanised, 22 x 9 mm For fixing the rubber profile (4903 000 130 0) 4903 000 131 0 (running meter) to the door

Pressure contact switch Incl. housing for mounting to For mounting a pneumatic safety edge4903 000 129 0 the door

Break contact

Helix cable 2 x 0,75 mm For mounting a pneumatic or electrical safety edge2-wire Can be extended to 3 m4903 000 134 0

Helix cable 4 x 0,75 mm4-wire Can be extended to 4 m4903 200 134 0

Closing stopper 1 piece 2 pieces are required to seal the rubber profile edge4903 000 145 0

Pneumatic pressure hose Length: 0.42 m For connecting rubber profile edge with4903 000 132 0 pneumatic contact switch


Electrical switching rail per running meter(W x H): 25 x 29 mmassembled with sealing lip Consists of:konfektioniert • Rubber profile4903 500 016 0 • Aluminium C-rail

• Switching strip (Please state when ordering:• 1 x connection set (1.2 k) • Precise length mm

• Cable connection right/left, viewed from inside of door)

Electrical switching rail per running meter(W x H): 36 x 40 mmassembled with sealing lip Consists of:konfektioniert • Rubber profile4903 500 017 0 • Aluminium C-rail

• Switching strip• 1 x connection set (1.2 k) (Please state when ordering:

• Precise length mm• Cable connection right/left, viewed from inside of door)

Cable connection box Class of protection: IP 65 For installation of the safety edge4903 500 013 0 Junction box

Dimensions ( W x H x D ): 70 x 70 x 60 mmincl. cable strain relief PG screw connection,terminal connectors

Switching rail evaluator Plastic STOP with re-opening – upon activation of the electrical 4903 500 015 0 Dimensions: ( W x H x D ) switching rail

110 x 80 x 65 mm with terminal resistance 1.2 k�

Class of protection: IP 65Potential-free relayoutput 4 A(redundant type)

SafetySystems



Application: For electrical protection of the main closing edge in conjunction with S 50 II – S 300 DMR door control.

2.1 Bottom safety-edge rail system:Electrical edge


OSE assembly set Assembly set for optical For protection of the main closing edge on roller doors,<<Roller shutter>> safety edge, consisting of: roller grids and roller shutters4903 100 002 0 • OSE transmitter

• OSE receiver• 4-wire helix cable• Conduit box• Overrun stopper, small• Assembly accessories

OSE rubber profile with Dimensions (W x H): Suitable for aluminium C-profilesealing lip 15 x 40 mm 4903 100 010 0<<Roller shutter>>4903 100 009 0

OSE overrun stopper, small Dimensions (W x H x D): For protection of OSE transmitter and receiver<<Roller shutter>> 30 x 35 x 18 mm when positioning the strip4903 100 014 0

OSE aluminium C-profile Dimensions (W x H): For fixing the rubber strip to the door<<Roller shutter>> 15 x 9 mm Suitable for rubber profile4903 100 010 0 4903 100 009 0

OSE assembly set Assembly set for optical For protection of the main closing edge of sectional doors<<Door>> safety edge, consisting of:4903 100 001 0 • OSE transmitter

• OSE receiver• 5-wire helix cable• Conduit box• Overrun stopper, large• Assembly accessories

OSE rubber profile with Dimensions (W x H): Suitable for clamping profilesealing lip 24 x 72 mm 4903 500 005 0 <<Door>>4903 100 008 0

OSE overrun stopper, large Dimensions (W x H x D): For protection of OSE transmitter and receiver<<Door>> 30 x 55 x 18 mm when positioning the strip4903 100 013 0

OSE aluminium C-profile Dimensions (W x H): For fixing the rubber strip to the door <<Door>> 25 x 12 mm Suitable for rubber profile4903 500 005 0 4903 100 008 0

Also suitable for the electrical edge!

SafetySystems


Application: For protection of the main closing edge with an optical safety edge in conjunction with BECKER door controlsS 50 II, S 60 II, S 80 and Multicard or Professional Card.

2.1 Bottom safety-edge rail system:Optical edge

SafetySystems



2.1 Bottom safety-edge rail system:Optical edge


OSE switching rail 24 V/DC; For installation of an optically monitoredevaluator max. 3,2 VA safety edge

Class of protection: IP 654903 500 023 0 Housing RAL 7035 grey Stop with re-opening

Dimensions (W x H x D):94 x 94 x 60 mm

OSE transmitter DR 11 With 10 m cable For installation of an optically monitored4903 100 006 0 Completely compound-filled safety edge

IR transmitter unit with:• Class of protection: IP 68• Diameter: 11.5 mm• Length: 37 mm• Transmitter range:

0,3 – 10 m• For applications between

–20° C und +75° C

OSE receiver DR 11 With 3 m cable For installation of an optically monitored4903 100 007 0 Completely compound-filled safety edge

IR transmitter unit with:• Class of protection: IP 68• Diameter: 11.5 mm• Length: 37 mm• For applications between

–20° C und +75° C

OSE-Conduit box OSE-Conduit box in IP 65 For installation of an optically monitored4903 100 012 0 Dimensions (W x H x D): safety edge - for connection of transmitter and receiver

52 x 52 x 35 mm with helix cable

OSE helix cable 5–wire For installation of an optically monitored4903 200 137 0 safety edge

SafetySystems


2.2 Switches, buttonsIllustration Designation/Item No. Type Function

Emergency stop switch set Flush-mounted version, 1-pole isolating, locking4901 200 102 0 for installation in S 60 II, To switch off automatic or remote-controlled door

S 80, WSTE, DMR systems in emergencies

Emergency stop switch set As above, but 4901 200 103 0 lockable

Emergency stop switch set Surface-mounted, with red button To switch off automatic or remote-controlled door 4906 000 147 0 Class of protection: IP 54 systems in emergencies

Dimensions (W x H x D):70 x 70 x 105 mm

• single-pole break • locking

Main switch set Flush-mounted version, For S 60 II and S 80 controls for retrofitting in 4901 200 108 0 3-pole isolating the front cover of the control

With padlock,lockable(not in scope of supply)

Main switch set Three-pole, surface-mounted For all-pole isolation of drives 3 x 230/400 V – 50/60 Hz4902 000 149 0 Class of protection: IP 54

With padlock,lockable(not in scope of supply)Dimensions (W x H x D):100 x 115 x 92 mm

Keyswitch set Flush-mounted version, For retrofitting in front cover, e.g. to operate a second4901 200 104 0 1-pole locking opening height or automatic reclosing feature

For door controls:• S 60 II• S 80


Pre-limit switch SET For dry areas Introduction of testing when using a pneumatic safety 4932 100 012 0 Consisting of: edge in conjunction with Beck-O-Tronic 4 control

• Break contact with 4 m cable• 1 mounting bracket• 1 starting rocker• Fixing material

Final limit position Class of protection: IP 54, External limit switching for automatic controlswith roller lever one make and break contact, The final limit position can be used in conjunction with 4902 000 151 0 Dimensions (W x H x D): electrical controls as

30 x 72 x 32 mm • optional feature for roller shutters, roller doors, roller grids etc.

• interrupter for manual door control safety devices

SafetySystems

Item No. VTKT EZ000070DEB


2.4 Light barriers, run-in safety device, traffic lightsIllustration Designation/Item No. Type Function

Infrared–– Transmitter/Receiver Can only be used as physical protectionlight barrier LS/IR Range: max. 15 m Suitable for outdoor installation4906 000 117 0 Control voltage:

12 oder 24 V/DC Class of protection: IP 54

Light barrier Complete with reflector Can only be used as physical protectionWL 260 – S 230 and mounting bracket Suitable for outdoor installation4906 000 116 0 Range: max. 5m

Class of protection: IP 65

Control voltage:24 – 240 V/AC12 – 240 V/DC

Run-in safety device • Pull switch For roller grids – run-in safety device in lintel area4902 000 248 0 • Steel cable

(up to 5 m door width)• Holding device

Traffic light, RED Signal colour RED For automatic door controls4906 200 114 0 Class of protection: IP 54

Diameter: 125 mmIncl. incandescent bulb 230 V/40 W–E 14

Traffic light, GREEN Signal colour GREEN As above496 200 115 0 otherwise as above

2.3 Final limit positions

RadioComponents


Connections and retrofitting

3.1 Radio receiver (plug-in)Illustration Designation/Item No. Type Function

1–channel radio receiver FM receiver board 1-channel Equipment for radio operation of plug-in • 40 Mhz, self-learning a door control:4905 660 001 0 • 4.78 million • S 60 II

coding options • S 80• 60 hand transmitter codes

(buttons) storable*• without hand transmitter

4–channel radio receiver FM receiver board 4-channel Equipment for radio operation of plug-in • 40 Mhz, self-learning a door control:4905 660 004 0 • 4.78 million • S 80

coding options• 60 hand transmitter codes


1–channel radio receiver FM receiver board 1-channel Equipment for radio operation of plug-in • 40 Mhz, self-learning a door control:4905 640 001 0 • 4.78 million • WSTE 1000

coding options • S 100 DMR• 30 hand transmitter codes • S 300 DMR


4–channel radio receiver FM receiver board 4-channel Equipment for radio operation of plug-in • 40 Mhz, self-learning a door control:4905 640 004 0 • 4.78 million • WSTE 1000

coding options • S 100 DMR• 30 hand transmitter codes • S 300 DMR


1/4 – channel radio • FM receiver board Equipment for radio operation of a door control:receiver module 1 and 4 channel • BOT 4plug-in • 40 Mhz, self-learning • BOM 520 / 8204905 200 017 0 • 4.78 million

coding options If used with • 30 hand transmitter codes • 1-channel hand transmitter ( BOT4 + BOM)

(buttons) storable* Up / Stop / Down / StopBOT4 • 4-channel hand transmitter (BOT4)

• 10 hand transmitter codes defined commands Up/ Stop / Down(buttons) storable* and garage lightingBOM 520 / BOM 820

• without hand transmitter

* For applications which require more than 30 or 60 hand transmitter

codes (buttons) (e.g. underground garages), please use our 12–bit

hand transmitter. Item numbers: 4905 550 001 0 or 4905 550 004 0

RadioComponents



Application: For potential-free operation (control pulse) of an existing door control.

3.2 Radio remote controlsIllustration Designation/Item No. Type Function

1-channel radio remote Complete with receiver, E.g. for retrofitting to an existing door controlcontrol with1K-maxi antenna and maxi hand (without integrated slot for radio receiver)hand transmitter transmitter, FM receiver4905 600 001 0 (40 Mhz, self-learning) in

plastic housing, surface-mounted,Class of protection: IP 54Dimensions (W x H x D):125 x 125 x 100 mmPower supply: 230 V/50 Hz4.78 million coding options30 hand transmitter buttons storableOne relay output, potential-free

1 relay outputChange-over contact: 5 A, 230 Vwith key function

1-channel radio remote As above As abovewithout hand transmitter4905 610 001 0

4-channel radio remote As above, but As abovecontrol with 4K-Maxi hand 4 relay outputstransmitter Change-over contact: 5 A, 230 V)4905 600 004 0 with key function


Hand transmitter 1-channel Incl. 12 V battery For operation of the remote controls mini Dimensions (W x H x D): described above4905 500 001 0 38 x 74 x 15 mm

Hand transmitter 4-channel Incl. 12 V battery For operation of the remote controls mini Dimensions (W x H x D): described above4905 500 004 0 38 x 74 x 15 mm

Hand transmitter 1-channel Incl. 9 V battery For operation of the remote controls maxi Dimensions (W x H x D): described above4905 530 001 0 60 x 110 x 22 mm Amplified transmitting power

3.3 Hand transmitterApplication: For operating door systems in conjunction with BECKER remote controls with self-learning radio.


Hand transmitter 4-channel Incl. 9 V compound battery For operation of the remote controlsmaxi Dimensions (W x H x D): described above4905 530 004 0 60 x 110 x 22 mm Amplified transmitting power

Hand transmitter 1-channel 12 bit, encodable For operation of the remote controlsmaxi Incl. 9 V compound battery described above 4905 550 001 0 Dimensions (W x H x D): Amplified transmitting power

60 x 110 x 22 mm

Neutral design without logo

Hand transmitter 4-channel 12 bit, encodable For operation of the remote controlsmaxi Incl. 9 V compound battery described above 4905 550 004 0 Dimensions (W x H x D): Amplified transmitting power

60 x 110 x 22 mm


Hand transmitter 10-channel Incl. 9 V compound battery For operation of the remote controls described above maxi Dimensions (W x H x D): Up to 10 door systems per hand transmitter4905 540 010 0 60 x 110 x 22 mm with the function: pulsed operation

With commutator Amplified transmitting power


Hand transmitter 40-channel Incl. 9 V compound battery For operation of the remote controls described abovemaxi Dimensions (W x H x D): Up to 13 door systems with the functions UP, STOP, 4905 540 040 0 60 x 110 x 22 mm DOWN or up to 40 doors by pulsed operation

With commutator Amplified transmitting power


30-channel industrial radio 30 channel 40 MHz FM-neutral For operation of the remote controls described abovetransmitter Radio self-learning Up to 10 doors with the functions UP, STOP, DOWN 4905 540 030 0 Dimensions (W x H x D): or up to 30 doors by pulsed operation

120 x 80 x 77 mm


With bracket for mounting to fork lift truck

RadioComponents


3.3 Hand transmitter

External Operator’s Controls


4.1 Switches and buttonsIllustration Designation/Item No. Type Function

Simple switch Flush-mounted, for dry areas Pick-up for connecting to a door control, 4901 000 149 0 e.g. in conjunction with:

• Beck-O-Tronic 4• Beck-O-Mat 520/820

Touch pulse

Simple switch Surface-mounted, water-prooft As above4901 000 150 0

Triple push-button Surface-mounted Pick-up for connecting to a door control,4902 000 141 0 Class of protection: IP 65 UP, STOP and DOWN

Control elements electrically interlocked

Triple push-button Surface-mounted Pick-up for connecting to a door control,4902 000 142 0 Class of protection: IP 65 UP, STOP and DOWN

Control elements electrically Lockableinterlocked

Keyswitch mini Surface-mounted Pick-up for connecting to a door control, e.g. in4901 000 146 0 Class of protection: IP 54 conjunction with:

with half-cylinder profile • Beck-O-Tronic 4and 3 keys • Beck-O-Mat 520/820

Touch pulse

Keyswitch mini As above As above4901 000 246 0 All cylinders key alike

Keyswitch mini Flush-mounted Pick-up for connecting to a door control, e.g. in 4901 000 145 0 Class of protection: IP 54 conjunction with:

with half-cylinder profile and • Beck-O-Tronic 43 keys, as well as anodised • Beck-O-Mat 520/820cover panel

Touch pulse

Keyswitch mini As above, but As above4901 000 245 0 Cylinders key alike

Application: For external operation of door systems in conjunction with BECKER door controls.

External Operator’s Controls



4.1 Switches and buttonsIllustration Designation/Item No. Type Function

Keyswitch with Flush-mounted Pick-up for connecting to a door control, e.g. in STOP button Class of protection: IP 54 conjunction with:4902 000 146 0 with half-cylinder profile and • Beck-O-Tronic 4

3 keys, anodised cover panel • Beck-O-Mat 520/820

Touch pulse

Keyswitch with As above, but all cylinders As aboveSTOP button key alike4902 000 246 0

Keyswitch with Surface-mounted Pick-up for connecting to a door control, e.g. in STOP button Class of protection: IP 54 conjunction with:4902 000 147 0 With half-cylinder profile and • Beck-O-Tronic 4

3 keys • Beck-O-Mat 520/820

Touch pulse

Keyswitch with As above, but all cylinders As aboveSTOP button key alike4902 000 147 0

Keyswitch post Incl. keyswitch Pick-up for connecting to a door control4902 000 170 0 (Item No. 4902 000 146 0)

and support foot Touch pulseClass of protection: IP 54Dimensions (W x H x D):120 x 1100 x 85 mm

Ceiling pull switch With red-white chain (length: 2m) Pick-up for connecting to a door control4902 000 160 0 Class of protection: IP 65

Dimensions (W x H x D):30 x 92 x 30 mm One break and one make contact

Radio code button Radio button code lock for Can be used in conjunction with 2 different door drives4901 000 301 0 2 channels with 40 Mhz self-learning FM receiver

With integrated keyboard insurface-mounted housing 2 opening codes with max. 8 digitsIncl. 9 V battery

Control computer 2-channel Control computer 2-channel For day time and rush hour settings4906 020 127 0 SC 08.21

for 35 mm top hat rail

ConnectingCables


5.1 Control and mains cables


12-wire control cable Lengths: For use with BECKER drives in conjunction with the 4822 200 082 0 1 m latest series of BECKER controls4822 200 078 0 4 m 4822 200 079 0 7 m4822 200 080 0 10 m

18-wire control cable Lengths: For use with BECKER drives in conjunction with the 4822 200 119 0 1 m controls from other manufacturers or BECKER controls 4822 200 120 0 4 m from older series4822 200 121 0 7 m4822 200 122 0 10 m

DMR control cable Lengths: For use with BECKER drives with torque control4822 200 099 0 4 m4822 200 102 0 7 m4822 200 101 0 10 m

FU control cable, 18-wire Lengths: For use with BECKER drives with4822 200 111 0 4 m frequency transformer technology (high-speed doors)4822 200 114 0 7 m4822 200 124 0 10 m

Mains cable With CEE connector 16 A For connection of door controls S10,4822 205 018 0 Length: 1.2 m S50II, S 60 II, S 60 II AF, S 80, S 100/ S 300

DMR and WSTE 1000

Mains cable, lockable With padlock, As above4019 300 009 0 lockable

(not in scope of supply)

PG screw fitting set Additional screw fittings For door control S 50 II, ...4901 200 105 0 1 x PG 11

2 x PG 13,5

PG screw fitting PG screw fitting 16/11 e.g. for helix cable4901 200 107 0 in set

Application: For connecting a BECKER drive to a BECKER door control.

opens garage doors at the touch of a button:

BECKER garage door driveBeck-O-Mat 520/820

Item No. VTPM GABOM010DEB

Whether it is a limousine, a flash sports car or an old banger, youlike driving your car in comfort and safety. For those who alsovalue security and convenience in a garage door, BECKER opensup new horizons: with the Beck-O-Mat 520/820 electronicgarage door drive and innovative radio remote control.The modern hand-held transmitter means you have everythingunder control: it is compatible with all popular vehicle radiosystems and allows you to operate your garage door easily at thetouch of a button. At the same time, you can switch on thegarage lighting integrated into the drive.Programming the Beck-O-Mat using a menu also means youhave everything you could want: you only need to move thedrive up and down once and the settings are adjusted to suit yourgarage door. The integrated light-emitting diodes provide youwith information about the operational status of the door atany time.As far as safety is concerned, Beck-O-Mat is ahead of its time:thanks to its electronic obstacle recognition, the drive stopsimmediately when the door meets with an obstacle.The Beck-O-Mat also puts paid to burglars’ plans. With a solidsteel chain and self-locking gearing, it protects the door frombeing pulled open forcibly and makes it virtually impossible forunwelcome guests to enter the garage.

Beck-O-Mat 520/820: The electronic garage door drivewith radio remote control

Your competent specialist for consultation, demonstration and installation of all BECKER products:

And to allow you to start planning your next trip without needingto worry about installing the drive - if you expect your garagedoor, to be practical and secure, your specialist dealer will be more than happy to come to your house and install the Beck-O-Mat professionally.

Beck-O-MAT 520/820BECKER opens up new horizons for anyone who values safety andconvenience in garage doors: with the Beck-O-Mat 520/820 electronicgarage door drive and innovative remote control. This state-of-the-artremote control is compatible with all commonly integrated vehicleradio systems and enables the garage door to be conveniently openedand closed with no effort at all. The Beck-O-Mat is also a true pioneerwhen it comes to installation and commissioning: the final limitpositions can be set quickly and conveniently by means of a process-controlled measurement feature. Menu-guided programming alsoenables the drive to be set to match the requirements of the garagedoor with a single ascent and descent.

The Beck-O-Mat is also one step ahead in terms of safety: thanks to itselectronic obstacle detection feature, it stops as soon as the doorencounters an obstacle, thus preventing dangerous accidents andcollisions. Equipped with a robust steel chain and self-locking gear,the drive also offers effective protection against forced entry, andmakes it as good as impossible for intruders to access the garage.

Electronic Garage Door Drives with Remote Control


Beck-O-Mat 520/820, Page 1

General functions:• Drive capacities of 500 – 700 N• Latest remote control with radio system compatible with gängigen

common vehicle radio systems (Home Link from Audi, BMW, Rover,Mercedes Benz)

• Soft start and soft stop• Easy installation and commissioning thanks to pre-fabricated-

installation elements• Easy setting of the drive with single ascent and descent of the

garage door• Safety provided by automatic cut-out• High break-in protection thanks to the use of a high-quality steel

chain and self-locking motor gear

Advantages in application:• Separate overload detection feature during ascent and descent• Menu-guided programming• Extensive safety devices• Smooth-running door system• Adjustable garage light • Cable connections plug-in type, without the need to open the drive• Stop during opening (prevents objects or people being caught

when raising the door system)• Contactless door control enabled by use of a light barrier• Maintenance-free chain tensioning

Item No. VRKT EZBOT010DEB

BECKER-Antriebe GmbHPostfach 65D-35760 Sinn

Telefon +49 (0) 27 72/5 07-0Telefax +49 (0) 27 72/5 07-110


BECKER — Drive and control technology for convenience and safety.

Beck-O-Mat 520/820, Page 2

Technical dataTensile andcompressive force: BOM 520/820: 500 N/700 N

Power supply: 230 V / 50 Hz

Operating current: BOM 520/820: 0,9 A/1,25 A

Motor operating voltage: 24 V D.C

Power consumption during opertation: BOM 520/820: 200W/280W

Idle power consumption: 4 W

Class of protection: only for dry areas

Weight of drive head approx.: BOM 520/820: 3,9 kg/4,7 kg

Dimensions of drive head: 400 x 210 x 122 mm

Running speed: 17 cm / s, soft start / soft stop

Control: microprocessor-controlled

Control sequence: 1st pulse: drive starts

2nd pulse: drive stops

3rd pulse: direction reversal

Radio control: 40 MHz

Illumination: 40 Watt - 230V Bulb, E14 Fitting

Illumination timeduring drive movement: 90 s, set at the factory

Illumination via 2nd channel: approx. 4 min illumination time

Interior push-button: available as optional equipment

Additional light: exterior lighting max.500 W or alarm light

Additional function: adjustable illumination time from60 s to 4 min or alarm light

Automatic cut-out: overload limit can be set separatelyfor both running directions10-stage fine adjustment

Safety device: automatic power adjustment with2processor safety technology,reversal during closing, partialreversal in closed position, stopduring ascent

Limit switching: microprocessor-controlled pathmeasurement with position control

Running time limitation: motor is automatically switchedoff after 90 s running time

Anti-lock protection: in addition to automatic cut-out,motor stop is detected

Locking device: as standard

Connection ofadditional safety devices: possible

Gear: sealed worm gear drive,self-locking

Running rail: galvanised C-profile, chain pre-assembled

Exterior emergency release: available as optional feature

Quick release: as standard, for internal operation

Safety testing: TÜV tested, CE mark, GS mark

Subject to technical changes.

Subject to technical changes. Beck-O-Mat 520/820, Page 3

Which drive for which door size?BOM 520 recommended up to max. door leaf surface of 9 m C-profile 3028 mm with chain: Swing doors max. 2500 mm door height

Sectional doors, front springs max. 2250 mm door heightSectional doors, rear springs max. 2125 mm door height

C-profile 3278 mm with chain: Swing doors max. 2750 mm door heightSectional doors, front springs max. 2500 mm door heightSectional doors, rear springs max. 2375 mm door height

BOM 820 recommended up to max. door width of 5 m C-profile 3028 mm with chain: Swing doors max. 2500 mm door height

Sectional doors, front springs max. 2250 mm door heightSectional doors, rear springs max. 2125 mm door height



BOM 520 / 820 assembly dimensionsD

C EF

G

A

B

Guide rail A B C D E F G guide-swing door sectional door

front springs rear springsC-profile 3028mm with chain 3350 2560 3028 3150 72 218 2500 2250 2125C-profile 3278mm with chain 3600 2810 3278 3400 72 218 2750 2500 2375C-profile 4028mm with chain 4350 3560 4028 4160 72 218 3500 3250 3125

A: Overall lengthB: Max. guide rail travel C: Length of railD: Distance between wall bracket and drive mountingE: Wall bracketF: Max. assembly height of railG: Door height

Subject to technical changes. Beck-O-Mat 520/820, Page 4

Beck-O-Mat 520/820 Product Details Item No. Description

BOM 520 complete set with chain consisting of: BOM 520 motor head, 1-channel 40 MHz radio receiver (Dickert),2715 010 000 0 1-channel mini hand transmitter (Becker), a universal door fitting,

a central mounting, a C-rail – 3-piece (chain), installation instructions

BOM 520 basic package consisting of: BOM 520 motor head, 1-channel 40 MHz radio receiver (Dickert),2715 012 000 0 universal door fitting, central mounting, installation instructions

BOM 820 basic package consisting of: BOM 820 motor head, 1-channel 40 MHz radio receiver (Dickert),2715 020 000 0 universal door fitting, central mounting, installation instructions

Order data for accessories Beck-O-Mat 520/820suitable for Item No. Description

Beck-O-Mat 520/820 2715 210 001 0 C-profile 3028 mm with chain, 2-piece, for swing door 2500 mm,sectional door VL 2250 mm, section door HL 2150 mm

Beck-O-Mat 520/820 2715 210 002 0 C-profile 3278 mm with chain, 2-piece, for swing door 2750 mm,sectional door VL 2500 mm, sectional door HL 2375 mm

Beck-O-Mat 520/820 2715 210 003 0 C-profile 4028 mm with chain, 2-piece, for swing door 3500 mm, sectional door VL 3250 mm, sectional door HL 3125 mm

Beck-O-Mat 520/820 2715 210 004 0 Sectional door fitting

Beck-O-Mat 520/820 2715 210 005 0 Emergency release, standard

Beck-O-Mat 520/820 2715 210 006 0 Emergency release, sectional doors

Beck-O-Mat 520/820 2715 210 007 0 Door fitting for drives offset at the back

Beck-O-Mat 520/820 2715 210 008 0 Door fitting for installation with lintel

Beck-O-Mat 520/820 2715 210 011 0 Door fitting with 2 shock absorbers

Beck-O-Mat 520/820 2715 210 013 0 Door fitting with double-leaf garage doors

Beck-O-Mat 520/820 2715 210 014 0 Curved arm door fitting

For further accessories, please refer to our catalogue for electrical parts.

Item No. VTKT TABOM020DEN – 01.06.2002

��

�

�

�

�

��

�

��

�

�

Item No. VTKT ST000010DEB

BECKER-Antriebe GmbHPostfach 65D-35760 Sinn

Telefon +49 (0) 27 72/5 07-0Telefax +49 (0) 27 72/5 07-110


� BECKER-Antriebe GmbHVerkaufslager Hans-Jürgen BrükkenkampAm Krausen Bäumchen 6b58675 Hemer (bei Iserlohn)

Telefon +49 (0) 23 71/ 68 94 20Telefax +49 (0) 23 71/ 79 78 34

[email protected]

� BECKER-Antriebe GmbHNiederlassung Süd-WestIng. Büro Hermann RaitzFreiburger Straße 1369469 Weinheim

Telefon +49 (0) 62 01/60 46 14Telefax +49 (0) 62 01/60 46 13

[email protected]

� BECKER-Antriebe GmbHNiederlassung Nord-OstGewerbering West39240 Brumby

Telefon +49 (0) 39 291/4 38-0Telefax +49 (0) 39 291/4 38-88

[email protected]

� BECKER Benelux Watermolen 17NL-6229 PM Maastricht

Tel. +31 (0) 43 /3 61 38 00 Fax +31 (0) 43 /3 61 37 92

[email protected]

� BECKER DRIVES LTD.Unit 13 Cornwall Business CentreCornwall Road, WigstonUK-Leicester, LE18 4XH

Phone +44 (0) 116/2 77 99 40Fax +44 (0) 116/2 77 65 03

[email protected]

� BECKER Automatismos, S.L.Centro Empresarial Renta 92Arboleda 14, Nave 30 y 20E-28031 Madrid

Tel. +34 91/301 33 91Fax +34 91/301 33 99

[email protected]

BECKER S.E.A. SàrlParc d'Activités A8621, rue Léon Geffroy - Bât. A1F-94400 Vitry sur Seine

Téléphone +33 (0) 146/82 05 04 Télécopie +33 (0) 146/82 34 95

� BECKER-Antriebe GmbHBayernstraße 399A-5072 Siezenheim

Telefon +43 (0) 662/852162Telefax +43 (0) 662/852163

[email protected]

� BECKER motori srlVia J. Duilestr.3I - 39042 Bressanone

Tel. +39/ 47 2/ 2073 31Fax +39/ 47 2/ 2073 32

[email protected]

� BECKER motory s.r.oKladenská 123/64CZ-160 00 Praha 6 – Vokovice

Tel. +420/ 2/ 20 61 23 23Fax +420/ 2/ 20 61 23 24

[email protected]

Map of Europe

door catalogue for becker sectional door...

Documents