consultancy details active mou :2018-19 research and

Focusing on objective of

submitting at least one

funded research proposal

for reputed funding agency

every academic year from

National funding agencies

(like UGC, CSIR, DST,

DBT etc. Total 5 projects

costing around 52 lakhs

were selected for 2nd round

viz.

Mechanical Department Newsletter(A.Y.2018-19) Page no 01

Consultancy Details

YEAR Consultancy Work PI and CO-Pis Total

amount (Rs)

2018-19 Design and Development of

piston Ring for dry air

compressor (ATLAS COPCO)

Dr.A.P.Kulkarni

Dr.A.R.Deshpande

70,000/-

(Ongoing)

2018-19 Pin on Disc Wear Test Prof.A.V.Salve

A.R.Deshpande

17000/-

2018-19 I.C.Engine Test (MMCOE) C.R.Ramtirthkar 12500/-

2018-19 Friction Welding M.G.Gadge 4000/-

Total 1,03,000/-

ACTIVE MOU :2018-19

Sr.

No

Name of

Organisation

Organisation

Representative VIIT Rreprentative Area ame

1 ATLAS

COPCO

Mr.Jay Shah Dr.B.S.Karkare Composite

Material Material Wear and Testing

3 Geometric

Limited

(HCL)

Mr.Yogiraj

Dama

Dr.A.P.Kulkarni DFX Design for Manufacturing

RESEARCH

AND DEVELOPMENT

1. Development of solar wind (Hybrid)

water pump for Irrigation application.

(DST) by Dr.D.A. Kamble

2. Exploring the Potential of Natural

Fiber Reinforced Metal Composites

for its Mechanical, Acoustics and

Damping Properties for Various

Structural and Non-Structural

Lightweight Applications by Dr A.R

Mache, A.V Salve and Mrs. S.V

Dravid

3. Exploring the Potential of Natural

Fiber Reinforced Metal Composites

for its Mechanical, Acoustics and

Damping Properties for Various

Structural and Non-Structural

Lightweight Applications

4. Diagnosis and prognosis of defects in

rolling element bearing by using

advanced vibration techniques by M.

N Jagdale and Dr.A.R.Mache

5. Investigation and development of

Innovative community cold storage

for vegetable preservation by

Dr.A.D.Kale and A.M.Manikjade.

6. Design and Development of low cost

Rotary Friction Welding Machine and

smart weld strength predictor for

joining of aluminum alloy with

dissimilar metal by Dr D.N Kamble

Bansilal Ramnath Agarwal Charitable Trust’s

Vishwakarma Institute of Information Technology

(An Autonomous institute affiliated to Savitribai Phule Pune University)

An ISO 9001-2015 Certified Institute Accredited with ‘A’ grade by NAAC

Mechanical Department Newsletter (A.Y.2017-18)

Dr. Ashok Mache

( HOD Mech )

S.Y.B.Tech Induction Program was held from 6th August 2018 to 10th August

2018.

The Objective of the program are listed below:

1. To aware the students about the recent skill set needed by the Industry

2. To introduce various activities being organized in the department by student

group such as MESA, SUPRA etc.

3. To motivate the students through sharing of experiences of the eminent

Mechanical Engineers from industry and Alumni as well.

4. To aware the students about the Academics and the Examination Reforms.

INDUCTION

PROGRAM

Mechanical Department Newsletter (A.Y. 2018-19) Page 02

Highlights of the Induction Program

Total 14 Sessions were conducted

4 Sessions by Industry Experts

1 session on Human Values

2 Sessions by Alumni

1 Session by MESA

1 Session by SUPRA

Library Orientation

One session each by HOD, Dean Academics,Dean- Industry,Dean Exam & T & P

Page 03 Mechanical Department Newsletter (A.Y. 2018-19)

Mechanical Department Newsletter (A.Y. 2018-19)

GALLERY

Year Consultancy work PI and

CO-Pis

Total

Amount (Rs)

2018-19

Design and Development of

Piston Ring for dry air

compressor (ATLAS

COPCO)

Dr. A. P. Kulkarni Mr. A. R.

Deshpande 70,000/-

2018-19 Pin on Disc Wear Test Prof. A. V. Salve 3500/-

2018-19

Vibration and Noise

Measurment using FFT

Analyzer

Prof.N.H.Ambhore 28,000/-

Total 1,01,500/-

RESEARCH

AND

DEVELOPEMENT

Submitting at least one funded research proposal for reputed funding

agency every academic year:


S.N. Title of Project Name of PI and

CO-PI

Project am

ount Rs.

Exploring the Potential of Natural Fiber Reinforced

Metal Composites for

its Mechanical, Acoustics and Damping Properties for

Various Structural and Non-Structural Lightweight

Applications

Dr.A.R.Mache

A.V.SalveMrs.S.V.Dravid

1135000/-

1

Numerical and Experimental Investigation of Wear

Behaviors of reinforced

PTFE Based Composite under dry and lubricated

sliding condition

Dr. Atul P.

Kulkarni

A R. Deshpane

1230000/-

2

Experimental Investigation and mathematical modeling

of tool wear and

machining performance of coated carbide tools in

turning hardened AISI 4340 steel

Dr.S.S.Chinchani

kar

M.G.Gagde

894000/-

3

4

Analysis of forced convection heat transfer

in microchannels with

refrigerants

Dr.D.A.Kamble

A.R.Dhumal 1350000/-

5 Investigation of solar operated vapour absorption

system

A.R.Dhumal

Dr.D.A.Kamble 285000/-

6

Diagnosis and prognosis of defects in rolling element

bearing by using

advanced vibration techniques

M.N.Jagdale

Dr.A.R.Mache 270000/-

Heat transfer enhancement in counter flow heat

exchanger using Al2O3

nanofluid

H.Y.Kolekar

Dr.S.S.Chinchanik

ar

300000/-

7

8

Investigation and development of Innovative

community cold storage for

vegetable preservation

Dr.A.D.Kale

A.M.Manikjade 1295500/-

9

Fatigue Life Enhancement through Optimization of

Machining Parameter of

Harden Steel AISI 52100

P. R. Anerao

Dr.A.P.Kulkarni 299000/-

Total Amount

7058000/-

From National funding agencies (like UGC, CSIR, DST, DBT etc):

BCUD ASPARE


Sr.

No.

Name of

Organization

Organisation

Representative

VIIT

Representative Area Name

1 ATLAS COPCO

(India) Ltd. Mr.Jay Shah Dr. B. S. Karkare

Composite

Material

Material Wear

and Testing

2 CADD Centre Ms. PankhiSahu Dr. A. P. Kulkarni CAD AutoCAD

3 Geometric

Limited

Mr.

YogirajDama Dr. A. P. Kulkarni DFX Design for

(HCL)

Manufacturing

ACTIVE MOU : 2018-19


Sr.

No.

Academic

Year

International National

Total No. of

Students

Participated

Journal Conference Journal Conference

01 2016-17 06 07 -- 05 18

02 2017-18 04 17 -- -- 21

03

2018-19

(Sem-I

Only)

03 06

04 13

PG Student Publications Year wise


Sr. No. Title of Project

1 Implementation of Automation to Sugarcane Node Cutting

Machine

2 Experimental Investigation of Pressure Drop Measurement Across

Regenerator in Cry Cooler

VSRPS Projects


MARKS AND

ATTENDANCE

Each faculty member implement successfully at least one

ICT device in each semester. Different platforms of ICT tools

:

Dr.A.P.Mache and Mr.P.R.Anerao sir has started their own

YouTube channel through which they are imparting

knowledge. From those videos they explained various small

cases nicely. Dr.A.D.Kale has created one blog to enhance

teaching learning process through online plus blended

teaching methods.

Faculty of mechanical engineering department conducted

Customized videos on Mech Eng. Software, MCQ based

tests using online KAHOOT QUIZES in Class, MCQ based

tests using Google Form, and MCQ based tests using online

KAHOOT QUIZES in Lab throughout semester for students.


Mechanical Department Newsletter (A.Y. 2018-19)

IV AND

STTP SY B. TECH, TE and BE students visited to the disparate industries with the faculty

of our college. These visits are a whole package that aims at widening the

information of students. These visits are associated with your academic

curriculum; therefore you get to acquire things that are helpful to you within the

future. Students will observe and learn on however theoretical ideas are placed

to into action, thereby aiding their practical learning.

Our college visited to the popular industries are following :


Faculty Training and Department

Activities To keep our teachers

updated about industry

and for research

purposes, every year we

organize various

training programs with

experts.We organize at

least one workshop/

webinar / conference

under Staff

Development Program

Name of company Duration No of faculties

SYSCAD Techno Solution 80 Hrs(Ongoing) 1. Prof.A.A.Somatkar

2. Prof.P.P.Rathod

Faculty for Industry training planned in Dec-2018 on CATIA

Advanced Modules

Name of Faculty Designation Company Name & Duration

Dr.A.P.Kularni Associate Professor TATA Technology and TVS Harita, One

week Prof.N.B.Kate Assistant Professor

Prof.P.R.Anerao Assistant Professor

Prof.M.N.Jagdale Assistant Professor

Interest shown by staff for training

Name of staff Designation Company Name & Duration

Mr.D.J.Kharade Lab Assistant ITI Aundh (2 week) 17-29th Dec 18; H&P

Three Days Faculty Training on Computer Aided Modeling using Fusion 360

byAutodesk in Association with SaiCAD

One Day Syllabus Implementation

workshopon Hydraulics and Pneumatics

3 days Training on Computer Aided

Design and Modeling using FUSION 360

Page No.13 Mechanical Department Newsletter (A.Y. 2018-19)

Being an autonomous college it’s our duty to keep students updated about the latest

technologies and work pattern used in industries, so this year we conducted 8 guest lectures

on various topics by industry experts to share their knowledge and experience with our

students.

Guests lectures

Value Added training course

To get hands on experience on

industry projects we organized 80

hours training course in association

with SysCAD Techno Solutions on

CAE using ANSYS. Co-ordinated

by Dr.A.R.Mache and

Dr.A.P.Kulkarni.

Sr. no Name of Speaker Company Designation Name of the Topic Class Date

1 Mr. TanulMohod Opulent Infotech Pvt. Ltd.

CEO Modeling concepts BE 19/7/18

2 Mr. Rahul Bora/ Mr. Dhiraj Bora

SAI, CAD Director / Center Manager

Computer Aided Design using Fusion 360

BE 23/7/18

3 Mr.ChittaranjanMajahan Dolphin Lab Director Automation using Mechatronics

SYBT 9/8/18

4 Mr. Kiran Shinde IFS Academy Sr. Engineer Finite Element Analysis BE 24/8/18

5 Mr.PravinBhamre TCS SAP Head Professional Ethics in Industry SYBT 10/8/19

6 NachiketPhadke ELENO CEO Career opportunities in Mech Eng Field

SYBT 6/8/18

7 Sujata Biyani SKN Vadgaon Assistant Prof Humanities SYBT 6/8/18

Faculty as a Recourse Person

1. Dr.S.SChinchanikar : Expert Lecture on Manufacturing Processes at Department of Mechanical

Engineering, Bhivarabai Sawant College of Engineering and Research, Narhe Pune-41

2. Dr.A.P. Kulkarni : Expert Lecture on Computer Aided Design at Bharti Vidyapeeth and SRT

Kamshet.

3. Prof. Nitin Ambhore : Expert Lecture on SOM and DOM at SRTTC Kamshet

4. Prof.D.B. Nalawade : Expert lecture talk on Centrifugal pump and Compressor at SRTTC Kamshet.

5. Dr.D.A.Kamble : Expert Lecture on Refrigeration and air conditioning at D.Y.Patil College of Engg.

Ambi

Industrial Applications of Finite Element

Analysis, BEMech Automation using mechatronics by

Mr. Chittaranjan Mahajan (SY)

Page No.14 Mechanical Department Newsletter (A.Y. 2018-19)

Dr.S.S.Chinchanikar and Dr.D.N.Kamble got approval for PhD guide. In another six

months, Dr. A. P. Mache, Dr.A.P.Kulkarni and Dr.D.A.Kamble will eligible to apply

for Guideship.

Dr. Ajay D. Kale received Appreciation from SPPU for Best Performance as CEO.Prof. N

.H. Ambhore Presented paper at International Conference at Lisbon, Portugal.

Faculty Research Publications included 5 international journals, 7 international conferences, 2

national conferences. These entire 14 papers completed in duration of 6 months i.e. June 18 to

Nov 2018.

Mechanical Department Faculty involves 6 PhD holders, 6 PhD pursuing,2 professors, 4

Associate Professors, 17 Assistant Professors.

FACULTY ACHIEVEMENTS

Dr. Ramesh Lokurwale who is HOD of mechanical branch at K.J.Somaiya College and Dr.

Attar A.C. who is working as professor at RIT Sakhrale conducted external academic audits

on 11th September 2018.External auditors used specific formats for their audit opinions and

they evaluated reviews with overall observations and remarks.

Internal iso audit examined the system throughout the college. One positive observation from

audit was well maintained documentation in soft format with central server system.

Page No.15 Mechanical Department Newsletter(A.Y. 2018-19)

STUDENTS ACHIEVEMENTS

Swapnil Gaikwad got 2nd prize in play in Vinodottam

Karandak as well as in Youth Festival. Sagar

Khandare won 3rd prize-Direction in Vinodottam

Karandak. Aniket Rodey got first prize in judo game

while Shubham Gite won third prize in body building

at university level.

Siddhes Sawant and Suraj Kolhe completed

their projects like SMART COMPOSITE,

SMART SOLAR KITCHEN under the

guidance of faculty Dr.A.R.Mache and

Dr.A.P.Kulkarni.

Our college students achieved great success in various

competitions.Akash Dadmal from BE Mech secured 1st

rank in Best Physique competition at university level.

Mrutyunjay Bandawane Tejas Taradgaonkar ,Nikhil

Bankar, Aniket Pabale received 1st rank in Contraption

event organized by PICT out of 41 teams. Avez. Shaikh,

Ritesh Chaudhari. Aditya Motiwala secured 3rd prize out

of 60 groups at IEEE Paper Presentation at PICT on ,

“Modern Forward Reverse Multi cylinder Ball Milling

Machine.

PCERF –VIIT Participated with 12 projects in 2

Days National Level workshop& Technical

Exhibition- “Smart Military Stations” at CME held

during 10th and 11th Aug 2018. Mechanical

department presented 2 projects from those

projects.

Page No.16

Mechanical Department Newsletter(A.Y. 2018-19)

Mechanical Department Newsletter(A.Y.2018-19)

STUDENTS ACHIEVEMENTS

Swapnil Gaikwad got 2nd prize in play in

Vinodottam Karandak as well as in Youth

Festival. Sagar Khandare won 3rd prize-Direction

in Vinodottam Karandak. Aniket Rodey got first

prize in judo game while Shubham Gite won

third prize in body building at university level.

Siddhes Sawant and Suraj Kolhe completed

their projects like SMART COMPOSITE,

SMART SOLAR KITCHEN under the

guidance of faculty Dr.A.R.Mache

andDr.A.P.Kulkarni.

Our college students achieved great success in various

competitions.Akash Dadmal from BE Mech secured 1st

rank in Best Physique competition at university level.

Mrutyunjay Bandawane Tejas Taradgaonkar ,Nikhil

Bankar, Aniket Pabale received 1st rank in Contraption

event organized by PICT out of 41 teams. Avez. Shaikh,

Ritesh Chaudhari. Aditya Motiwala secured 3rd prize out

of 60 groups at IEEE Paper Presentation at PICT on ,

“Modern Forward Reverse Multi cylinder Ball Milling

Machine.

PCERF –VIIT Participated with 12

projects in 2 Days National Level

workshop& Technical Exhibition- “Smart

Military Stations” at CME held during 10th

and 11th Aug 2018. Mechanical department

presented 2 projects from those projects.

Page No.17

SUPRA

Team VISWARACERS secured 5th all over India rank at the SAE Supra 2018

National level competition held at Buddha International Circuit, Greater Noida from

11th June to 16th June 2018.

Total 112 teams participated in competition.

Also team VISWARACERS awarded as 2nd most cost effective car (cash prize: 20,000

INR) and got 2nd position in autocross (cash prize: 20,000 INR).

Page No.18

Mechanical Department Newsletter(A.Y. 2018-19)

Team SUPRA 2018

Internship

Quality Objective

Encouraging at least 50 % of the students from SE to BE for internship for every academic

year.

180

160

140

120

100

80

60

40

20

0

167

53 50

17 22

SemI &II SemI SemII SemII SemII

2017-18 2016-17 2015-16 2014-15

113 Students have completed internship in 2018-19 (Sem-IOnly)

Student Internship

(Experiential learning)

The complete design for gearbox was done in

Microsoft Excel in VBA

The formulas for gear design were entered in VBA.

The GUI is created in the User form VBA.

Page No.19 Mechanical Department Newsletter(A.Y. 2018-19)

Placement

QualityObjective Improving placement of students by 5% of average of previous 3years Placement Record : 2018-

2019 (Period: From 10th

June to tilldate)

Year 2015-16 2016-17 2017-18 2018-19

Total in take 160 141 144 143

Placement as per

T & P Record 40 26

32

(ongoing) 12 (ongoing)

Off Campus 37 27 10

(ongoing)

Higher

Education 17(22) 8(4)

06

(ongoing)

Entrepreneur 2 3 02

Total 96 59 49 (ongoing)

Submitting at least one funded research proposal for reputed funding agency every academicyear.

From National funding agencies (like UGC, CSIR, DST, DBTetc):

QualityObjective

Sr.

No.

Funding Agency,

Duration & date of

sanction

Number of

Proposal’s

Amount (in

Lakh) Remarks if any

01 TARE-SERB 02 30,00000/- Applied for funding

Mechanical Department Newsletter(A.Y. 2018-19) Page No.20

Number of students placed (A.Y. 2018-19):

Sr No Name of the company Name of the Student CTC offered (In

Lacs.) NO of students

1 Atlas Copco Ltd Sanke Ankita, Siddhant

sundar 6.25 2

2 Bajaj Auto. Ltd Nachiket Gaikwad 8.75 1

3 Faurecia Ltd

Joshi Meghana, Dukare

Vijay, LondheSushant,

Shrey Shekhar, Thakur

Saurabh

3.5 5

4 Reliance Industries Vinayk Gaikwad Siddhant

Patil Akanksha Srivastav 4.5 3

5 TATA Technology Omkar Jagtap 4.0 1

Total (Ongoing) 12

Mechanical Department Newsletter(A.Y.2018-19) Page No. 21

Abhijieet

Mahandule

Tejesh

Shridhar

Designing

SY

Designing

SY

Sakshi

Suryawanshi

Akanksha

Parkhi

Associate Workshop

Head

TY

Associate PM

Head

TY

Shantanu

khoraskar

Kartik

Kulkarni Renu

kangutkar

Designing &

Documentation

SY

General Secretary

BE

Designing

SY

Abhijeet

Purandare

Shreyash

Thorat

Design Head

TY

Documentation Head

TY

Rohit

Joshi

Prachi

Mali

Ashwajeet

Kamble

Documentation

SY

Documentation

SY

Documentation

SY

Prachi

kalure

Designing

SY

Mechanical department Newsletter (A.Y. 2018-19)

Working Committee of

Newletter

consultancy details active mou :2018-19 research and

Documents