2300 series
TRANSCRIPT
TWO-WAY LCD VEHICLE SECURITYAND ENGINE STARTER SYSTEM
TWO-WAY LCD VEHICLE SECURITY AND ENGINE STARTER SYSTEM MANUAL FOR OPERATION AND INSTALLATIONplease read this manual carefully before operate and install the machine
2300 Series2300 Series
Thank You for Purchasing 2300 Series Long-Range Two Way PLL-FSK
Vehicle Security System with 3D Sensor
Manual for operation and installation
2Two-way LCD vehicle security and engine starter system 2300 Series
1
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯ ( )
1. Standard Arming Mode
2. Multi-Level Security Arming
4. Anti-robbery
5. Disarming
7. Query Function
8. Turbo/Short Run
10.Valet Mode
1. Time of Motor Crank
2. Remote Engine Start3. Remote Start Timer Mode4. Temperature Start Mode
3. Dome Light
10
11
1112
12
12
13
1313
14
15
15
1616
17
17
17
C.The choice of Centigrade or Fahrenheit 8
3. Panic Mode
6. Trunk Release
9. Auxiliary Output
The setting of Remote Control
Manual for operation and installation
4Two-way LCD vehicle security and engine starter system 2300 Series
3
Product Description
6.The Installation of Remote Starter
Brain Unit
2300A 2300B 2300C
Remote Control:
Base on low power PLL-FSK technology.
Remote Starter Module:Gear checking function for manualcar,guarantee the security.
Valet Switch:Valet Switch is for Disarm the system without Remote Control,Program Features and Code Memorizing of Remote Control.
Communicatin Unit:1.3D sensor buitl-in2.Temperature compensation3.Adopt PLL-FSK technology at 433.92MHz
1. Code Memorizing of Remote Control
2. Disarm the System without Remote Control
3. Checklist of Options
4. Program Features
1. Impact
2. Slope3. Door
4. Hood
5. Trunk6. Region Sensor
4. Passive Arming
5. Automatic Re-arming
6. Door Status Reminder
7. Status Memory
8. Smart LED Indicator
9. Code Hopping
10.Battery Capability Shortage Arming
17
17
17
18
18
18
18
18
18
19191919
19
20
20
21
22
23
23
25
26
26
29
29
30
31
32
PRODUCT DESCRIPTION
Manual for operation and installation
6Two-way LCD vehicle security and engine starter system 2300 Series
5
starts successfully or remote start timer mode ON
Keylock
ON/OFF
ON/OFF
m
Features choice from 1 to 17
Region Sensor(Microwave Sensor or Ultrasonic Sensor)
(When it appears,showing the hood opened)
(When it appears,showing the trunk opened)
F e a t u r e s
Turbo
Option
Aux
A u t o s t a r t -Temperature Keyboard
BacklightTRUNK
HOOD
P
Infrared 3DSENSOR
F e a t u r e s
Turbo
Option
Aux
A u t o s t a r t -Temperature Keyboard
BacklightTRUNK
HOOD
P
Infrared 3DSENSOR
F e a t u r e s
F e a t u r e s
Turbo
Option
Option
Aux
A u t o s t a r t -Temperature
Keyboard
Backlight
TRUNK
HOOD
P
Time of Motor Crank(0.6sec,0.9sec,1.2sec,1.5sec,1.8sec,
Manual for operation and installation
8Two-way LCD vehicle security and engine starter system 2300 Series
7
M M
" "" "
M
M
" "
" "
time of remote start,the setting of temperature start,options and features)
Note:When the icon" "display,showing the Sound On Mode; When the icon" "display,showing the Vibration On Mode.
Note:When the icon" "display,showing the Centigrade Mode; When the icon" "display,showing the Fahrenheit Mode.
You can choose either the Sound Mode or the Vibration Mode.
None chirp from the horn under the Silent On Mode,when the status is armingor disarming.
TRUNK
HOOD
TRUNK
AAAKeyboard
Keyboard
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAATRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
Backlight
Backlight
Backlight
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
Note:When the icon " "display,showing the system enter the keylock mode.
Key lock function is for preventing triggers by mistake,the keyboard is activated when
you lock the key.
Backlight Off Mode is for saving power.
You can query the temperature inside the car,and choose either Centigrade Mode
or Fahrenheit Mode of the temperature.
The product use 3D digital shock sensor,which detect six directions even the tilt of the car.User can set the shock level to meet different need,and can query the shock level on the LCD timely.
3DSENSOR3DSENSOR
AAA
3DSENSOR3DSENSOR
AAA
3DSENSOR3DSENSOR
AAA
Manual for operation and installation
10Two-way LCD vehicle security and engine starter system 2300 Series
9
" "
3DSENSOR3DSENSORNote:When the icon" "," " and " "flash,showing the setting of shock sensor.
Note:When normally lock the car,press" "once,showing the shock sensor level; If showing the icon" ",the system enter the Multi-level Security Mode.
The way of query the shock sensor level is as follows:
2300 Series Remote Control uses the alkalinity environmental protection battery,please select the request battery,otherwise possibly cause the battery service life to be short or the work of Remote Control is not mormal. 2300 Series uses intellective power management,the battery can be used for 3-8month under the normal work condition.There are 4 levels" "for electric power indicator on Remote Control.When display the icon" ",the work distance will be discreased;when display thebattery icon" ",please replace the battery.
give out three siren chirps with light flashes 25sec after you turn off the ignition key and close all the
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
The method of openning the battery cover of 2300A
The method of opennig the battery cover of 2300B/C:
Note:1.The level of tilt and vibration are the same.
TRUNK
HOOD
TRUNK
AAA
18sec later
Manual for operation and installation
12Two-way LCD vehicle security and engine starter system 2300 Series
11
When the key of car is the
position of"ON"
Note: Multi-Level Security Arming only applies to a single arming cycle. Once the system is disarmed and then re-armed, all the zones (inputs) will be active again.
TRUNK
HOOD
TRUNK
AAA
Manual for operation and installation
14Two-way LCD vehicle security and engine starter system 2300 Series
13
P21
TRUNK
HOOD
TRUNK
AAA
AuxAux
Note:①When the trunk is released,the default is diarm. ②You may select arm when trunk released by options.(This function is suitable for cars with electric trunk opener),see the 12th item of Checklist of Options,P21. ?When the trunk is open,the Remote Control display the icon" ".TRUNK
AAAA u t o s t a r t -Temperature
HOOD
P
A u t o s t a r t -Temperature
HOOD
P
User can query below status of car timely:?Arm/Diarm ?Door Open/Close ?Hood Open/Close ?Trunk Open/Close ?IGN On/Off ?Handbrake Up/Down ?The temperature of the car
P21
TRUNK
HOOD
TRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
TurboTurbo
Turbo On Mode
The product have the features as below:
1.There are three ways for Remote Starting Mode:Remote Engine Start,Remote Start
Timer Mode and Temperature Start Mode.
2.There are two modes for Remote Starting:Tachless and Tachness.
(1)It will be easier to install at Tachless Mode.
(2)There are two advantages to use Tachness Mode:
?Detect the abnormity of engine running;
②To the manual car,the tach wire input must be connected to tachometer for safety,
otherwise,it can�t start the car.
3.The motor crank time can be set by the remote control.
Note:
1.The default of motor crank time is 12sec,user can setup the motor crank time,accord-
ing to different vehicle and condition.
2.The state of auto-vehicle must be in park position and pull up the hand brake for safety. If the hand brake wire is be grounded,the default of vehicle is in park position and the vehicle can be started by remote control.The wiring of remote starter module,please sees P25.
3.The vehicle can start only in the arming state.
4.When the vehicle is running during remote start operation,if it detected the abnormity
engine,the system will monitor the vehicle and will automatically shut down the engine.
5.If the auto-vehicle use Tachless Mode,it has not the function4 as above.
!
(Must Need Remote Starter)
A u t o s t a r t -Temperature
HOOD
P
A u t o s t a r t -Temperature
HOOD
P
AAAA u t o s t a r t - A u t o s t a r t -Temperature Temperature
HOOD
P
A u t o s t a r t - A u t o s t a r t -Temperature Temperature
HOOD
P
AAA
Manual for operation and installation
16Two-way LCD vehicle security and engine starter system 2300 Series
15
P7
sec,ti ll the icon " "and" "flash
There are 8 options to select:0.6sec,0.9sec,1.2sec,1.5sec,1.8sec,2.1sec,2.4sec and 2.7sec.According to different need,user can set different engine crank time.
Note:
a. There are two way
1.Time of Motor Crank
4. Temperature Starte Mode
TRUNK
HOOD
TRUNK
AAA
AuxAux
TRUNK
HOOD
TRUNK
AAA
TRUNKTRUNK
AAA
TRUNK
HOOD
TRUNK
AAA
a.Set the parking brake b.Turn off the ignition key,the engine will keep running c.Exit and secure the vehicle,press" "for 0.5sec to arm,the vehicle turn off at once if in turo mode,it will turn off when finishing the turbo time.
7.If the key of car is the position of "ON",the vehicle cannot start.
8.The vehicle with a encyption chip key need a bypass module
Display
How to Drive Your Remote Started Vehicle:
2.Remote Engine Start
TRUNK
HOOD
TRUNK
AAA
AuxAux
Press button" "
3. Remote Start Timer Mode
The tach signal disappear.
(1) Set the manual car in Checklist of Options,the setting sees P21;
(2)The requirement for parking the vehicle:
! 6.To manual car,the tach wire must be connected to tachometer,otherwise,it cannot start.
Set the manual car,please find the setting as below.
" "
Manual for operation and installation
18Two-way LCD vehicle security and engine starter system 2300 Series
17
Showing the alarm status of car alarm system
HOOD
TRUNK
HOOD
3DSENSOR
HOOD
3DSENSOR
P7
disarm
Manual for operation and installation
20Two-way LCD vehicle security and engine starter system 2300 Series
19
TRUNK
HOOD
TRUNK
HOODHOOD
TRUNK
HOODHOOD
TRUNK
HOODHOOD
6. Region Sensor(Optional)
Region sensor triggered
d:You may select a region sensor,such as microwave sensor or ultrasonic sensor,your
Infrared Infrared
TRUNK
HOODHOOD
Infrared Infrared
TRUNK
HOODHOOD
7.Automatic Re-arming
Manual for operation and installation
22Two-way LCD vehicle security and engine starter system 2300 Series
21
3. Checklist of Options
Note:①According to different vehicle,the features(1-6)be set in the car according to step1 -step7,to make sure it can not be triggered by remote control. ②The features(7-17) can be set by the remote control to make more convenience for user. ③If no programming activity occurs within a 20sec period,the Features Programming Mode will expire.
STEP6 STEP7
Press button" " for0.5sec,the icon flash
4. Program Features
Step5 Step6
TRUNK
HOOD
TRUNK
AAA
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
1.Transmission type of car
4.Gasoline/diesel engine
6.ING2 fire off or on when motor crank
F e a t u r e s
Option
Manual for operation and installation
24Two-way LCD vehicle security and engine starter system 2300 Series
23
Step5 Step6
TRUNK
HOOD
TRUNK
AAA
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
TemperatureTemperature
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
TemperatureTemperature
?If you want to set up the 7th feature to be "OFF",please follow below step:
F e a t u r e s OptionF e a t u r e s Option
TRUNK
HOOD
TRUNK
AAA
Note:2300series have 8 wires in the whole unit.The madatory wires content:H1,H2,H3,H4,
H8 and H9.The optional wires content:H5 and H11(Remote Starter Module),H6 and H7
(For future use),H10(Region Sensor).
Output is 7A(+)and 250mA(-).The light2 switch(+/-)ison main board,the default is (+)output.
The default is (+)output.
(1)
Manual for operation and installation
26Two-way LCD vehicle security and engine starter system 2300 Series
25
?Ultrasonic Sensor only ?Both Microwave Sensor and Ultrasonic Sensor)
3PIN BLACK Connector(H10):Region Sensor(①Microwave Sensor only(2)
4PIN WHITE Connector(H6) and 3PIN RED Connector(H7):For future use.
Manual for operation and installation
28Two-way LCD vehicle security and engine starter system 2300 Series
27
Manual for operation and installation
32Two-way LCD vehicle security and engine starter system 2300 Series
31
If in multi-level security arming, the shock sensor and tilt sensor maybe not alarm
8.Whether the Communication Unit attachment does insert will?
(8)
The tach wire input must be connected to tachometer for manual car,otherwise,it can�t start the car.
The way of setting sees P21.
tachless.