desktop by samuel c w
TRANSCRIPT
D1: Virtual desktop
By Samuel coghlan-white
Power supply unit
• To add the power supply slot it in place and secure with screws
• Connect the power supply to the motherboard, hard drive and disk drive
RAM
• Place the RAM in the allotted slot and then clip then in
CPU
• Place the prosser in the correct position • Fold the clip down then the pin • Then place thermal compound on the CPU
Heat sink
• Place the heat sink on top of the prosser • Screw in place then connect it to the
motherboard
motherboard
• Place the motherboard in the right place then screw it in
Adapter cards
• Place the card in the right bus slot and then screw in place
Hard Drive
• Insert the hard drive then screw in place with screws
• Connect it to the mother bored with the SATA cable
Disk Drive
• Place the disk drive in the external bay then screw in place
• Connect the disc drive to the motherboard with a PATA cable
Monitor
• Connect the VGA cable to the computer and then the monitor
Other peripherals
Keyboard/mouse:• Plug the mouse/keyboard into the back of the
tower
• screw the antenna into the network card at the back