SIL-ACT®

PCI-100Deck-Sil®

DRI-TRETETM

MULTIGARD®

CleanACTTM

HISTORY OF Advanced ChemicalOver 40 years ago Advanced Chemical Technologies, Inc. (ACT) provided the first silane based product to protect a bridge structure. This bridge was located near Tulsa, Oklahoma. From that time forward ACT has been a leader in the penetrating waterproofing market due to an innovative approach and a focus on this industry segment. Advanced Chemical was the first company to protect a nuclear power plant with a silane based product. Their products have been used world wide to protect hospitals, office buildings, universities, shopping malls, and many other concrete and masonry structures from the destructive forces of water, salt, ion, and chemical pollutant ingression. By protecting structures from this ingression, SIL-ACT® extends the lives of buildings. SIL-ACT® is resistant to fungal growth, dirt, grime and carbon intrusion on concrete and masonry, thus preserving the appearance of buildings and reducing maintenance costs. In 1982, U.S. Patent #4,342,796 Method for Inhibiting Corrosion of Internal Structural Members of Reinforced Concrete was issued to ACT.

CHEMISTRY OF SIL-ACT® PRODUCTSSIL-ACT® is an alkyltrialkoxy silane treatment that permanently weatherproofs concrete and masonry without forming a surface coating. Unlike conventional surface coatings and sealants, SIL-ACT® water repellent products, chemically bond to the substrate creating a unique, effective water repellent barrier. Once the SIL-ACT® has penetrated the surface, a rapid chemical reaction occurs, creating a deep hydrophobic layer. This reaction forms a one-way filter where salt, water, chloride ions and staining substances are repelled while vapor passes freely out of the concrete. This actually makes the concrete dryer with age, providing increased protection for reinforcing steel components.

PENETRATION OF SIL-ACT®

CHEMICALSEvidence of up to 1/2” penetrated layer is shown in this concrete test core when split and wetted.

Up to

1/2”Penetrated

Later

PREVENTS • REDUCES • INHIBITSPrevents Water Damage • Reduces Maintenance • Inhibits Efflorescence

SIL-ACT ®

PREVENTS • REDUCES • INHIBITSPrevents Water Damage • Reduces Maintenance • Inhibits Efflorescence

SIL-ACT® PRODUCT PERFORMANCE SIL-ACT® PRODUCTS HAVE BEEN TESTED BY• Wiss, Janney, Elstner Associates

• Nelson Testing Laboratories

• CTL Group

• Alberta Transportation and Utilities

• Numerous state DOT’s

• Tourney Consulting Group

SIL-ACT® PRODUCT BENEFITS

• Deep penetration

• Resistant to wind and driven rain

• Resistant to chloride

• Resistant to water intrusion

• Resistant to freeze-thaw damage

• Breathable

• Resistant to efflorescence and waterborne staining

• Not susceptible to ultraviolet or chemical degradation

• Keeps substrate cleaner

• No appearance change to surface or

texture

• Prevents mildew growth

SPECIFIED SIL-ACT®

PERFORMANCE TESTS:

• ASTM C-642

• ASTM C-672

• ASTM E-514

• Alberta T&U (18)

• AASHTO T-259/T-260

• NCHRP 244

Over 40 Years of Protecting the World’s Infrastructure

• STOPS WATER

• STOPS SALT

• STOPS STEEL CORROSION

SIL-ACT ®

Product VOC Application Concrete Concrete Concrete Masonry Natural Polished CMU Rate Bridge Parking Buildings Stone Stone ft2/gal Decks Decks SIL-ACT ATS-22 <600 60-80 h h

SIL-ACT ATS-22 VOC <400 60-80 h h

SIL-ACT ATS-40 VOC <400 100-175 h h h

SIL-ACT ATS-42 <600 100-175 hh h h

SIL-ACT ATS-42A <250 100-175 h h

SIL-ACT ATS-42L <600 100-175 h h hh hh

SIL-ACT ATS-44A <400 100-175 h h

SIL-ACT ATS-100 <400 250-300 hh hh h h hh

SIL-ACT ATS-100LV <250 250-300 hh hh h hh

SIL-ACT ATS-200 <400 250-300 hh hh h h hh SIL-ACT ATS-300 <250 250-300 hh hh h h hh DRI-TRETE <60 40-80 h h hh

DRITE-TRETE WB 40 <350 100-200 hh hh hh hh

MULTIGARD <350 49-80 h h hh

PCI-100 <350 100-150 hh hh

SIL-ACT® ATS-22• 20% active ingredient• Less than 600 g/L, VOC• No window masking

SIL-ACT® ATS-22 VOC• 20% active ingredient• Less than 400 g/L, VOC• No window masking• LEED Compliant

h Recommended hh Highly Recommended

WATER BASED PROTECTANTSDRI-TRETE™ WB• 10% active ingredient• Less than 300 g/L, VOC• Windows must be protected• Silane/Siloxane emulsion• LEED Compliant

DRI-TRETE™ WB 40• 40% active ingredient• Less than 350 g/L, VOC• Windows must be protected• Silane/Siloxane emulsion• LEED Compliant

MULTIGARD®

• Water dispersible silane• 9:1 or 6:1 application rate• Very cost effective• Windows must be protected• LEED Compliant

SIL-ACT® ATS-40 VOC• 40% active ingredient• Less than 400 g/L, VOC• No window masking• LEED Compliant

SIL-ACT® ATS-42• 40% active ingredient• Less than 600 g/L, VOC• Industry standard since 1977• No window masking

SIL-ACT® ATS-42A• 40% active ingredient• Less than 250 g/L, VOC• No window masking

SIL-ACT® ATS-42L• 40% active ingredient• Less than 600 g/L, VOC• Formulated for limestone and other natural stone• Windows must be protected

SIL-ACT® ATS-44A• 40% active ingredient• Less than 400 g/L, VOC• No window masking• LEED Compliant

SIL-ACT® ATS-100• 100% active ingredient• Less than 400 g/L, VOC• No window masking• LEED Compliant

SIL-ACT® ATS-100LV• 100% active ingredient• Less than 250 g/L, VOC• No odor • No window masking

SIL-ACT® ATS-200• 100% active ingredient• Less than 350 g/L, VOC• Low odor • No window masking

SIL-ACT® ATS-300• 100% active ingredient• Less than 250 g/L, VOC• No odor • No window masking

PCI-100

ADVANTAGES PCI-100 is a next generation silane water repellent treatment for steel reinforced concrete. The addition of the corrosion inhibitor with the 100% reactive silane provides increased protection for: • Deep hydrophobic layer of protection • Proven anti-corrosion additive for steel reinforcement reduces microcell and macro cell corrosion • Reduces active corrosion of steel reinforced concrete excellent resistance to water intrusion • Excellent resistance to chloride ion ingress • Maintains vapor permeability of concrete • VOC compliant • Easy to apply • Fast dry

USES PCI-100 should be used on cast-in-place, pre-cast and high strength concrete to protect the reinforcing steel from corrosion due to the effect of water, deicing salts and carbonation.

• Bridge Decks • Columns • Beams • Piers • Parking Garages • Sea Walls • All steel reinforced concrete structures

SIL-ACT ®

Meets or exceeds ASTM G109 and FHWA-HRT-07-043 test protocol

STOPS REBAR CORROSION

Clear 100% active penetrating silane containing a Migrating

Corrosion Inhibitor. This combination of two proven

technologies provides a deep hydrophobic layer of protection

to the concrete and anti-corrosion protection to

the reinforcing steel.

0

200

400

600

800

1000

1200

1400

1 2 3 6 9 12

TotalCorrosionComparison(coulombsvs.Ime,months)

SIL-COR Uncoated(Control)PCI-100

Untreated Concrete surface with cracking needing repair.

Step 1 Apply Deck-Sil® PS 1700 treatment

PS which penetrates into the concrete, creating hydrophobic layer.

Step 2 Apply Deck-Sil® EP 1700 treatment

EP to heal cracks and drive PS 1700 deeper into the concrete.

Treated After extensive traffic wear, the surface remains sealed against water ingress.

Deck-Sil®REPAIR • PRESERVE • REHABILITATE Perfect for.......

• Bridge Decks • Barrier Walls • Abutments

• Sidewalks • Substructure • Parking Garages

Deck-Sil® 1700 REPAIR SYSTEM PS 1700 SILANE 100% WATER PROOFS EP 1700 EPOXY 70% CRACK HEALER/SEALER

Deck-Sil® 2700 HIGH SOLIDS REPAIR SYSTEM PS 1700 SILANE 100% WATER PROOFS EP 2700 EPOXY 100% CRACK HEALER/SEALER

Deck-Sil® 3700 PRESERVE SYSTEM PS 1700 SILANE 100% WATER PROOFS EP 3700 EPOXY 100% SINGLE LIFT OVERLAY

Deck-Sil® 4700 REHABILITATE SYSTEM PS 1700 SILANE 100% WATER PROOFS EP 2700 EPOXY 100% CRACK HEALER/SEALER EP 5000 EPOXY 100% SINGLE LIFT OVERLAY

The Deck-Sil® Process is Protected by U.S. Patent No. 9,242,269

Perfect for....... • Bridge Decks • Barrier Walls • Abutments

EP-750 EPOXY URETHANE HEALER SEALER

EP-1000 100% SOLIDS EPOXY HEALER SEALER

SIL-ACT® EP-750 is a highly penetrating, two component epoxy healer sealer which when applied to cracked concrete, structurally seals the cracks against moisture and chloride ion intrusion, prolonging the life of the concrete. Its rapid cure time allows traffic to re-open in less than six hours.

BENEFITS• Excellent bond strength• Moisture insensitive• High early strength• Easy to mix - 1:1 ratio• Low modulus, super low viscosity• Epoxy urethane technology• Color coded for ease of mixing

USES• Bridge decks• Parking decks• Concrete floors• Columns & beams in splash zones• Consolidation of porous & dusting surfaces

SIL-ACT® EP-1000 is a two component epoxy healer sealer which when applied to cracked concrete, structurally seals the cracks against moisture and chloride ion intrusion, prolonging the life of the concrete. Its rapid cure time allows traffic to re-open in less than six hours.

BENEFITS• Excellent bond strength• Moisture insensitive• High early strength easy to mix - 2:1 ratio• 100% solids, super low viscosity• High tensile strength for superior retention of aggregates• For use as pre-treatment prior to overlay

USES• Bridge decks• Parking decks• Concrete floors• Columns & beams in splash zones• Consolidation of porous & dusting surfaces• Primer or pre-treatment for epoxy and epoxy urethane overlays

EP-5000 100% SOLIDS EPOXY OVERLAY

SIL-ACT® EP-5000 is a fast setting solvent free, 100% solids, moisture insensitive, low-modulous epoxy urethane co-polymer overlay resin. It is designed primarily for bonding skid-resistant overlays to bridges, elevated slabs and Portland Cement Concrete Pavement, including High Friction Surface Treatments.

BENEFITS• Epoxy urethane technology• Excellent bond strength• Moisture insensitive• Nonflammable• Easy to mix - 1:1 ratio, color coded• Retains high tensile elongation at low temperatures• No primer needed• Designed for automated pump• Non-regulated, hazmat certification or placards not required for transport

USES• Bridge decks• Parking decks• Portland Cement Concrete Pavement• High friction surface treatments

SIL-ACT ®

Epoxy Coatings

Bio-CleanTM CONCENTRATEDCleanACT· Bio-CleanTM is the green way to meet today’s stringent and ecologically responsible cleaning needs for concrete, masonry and natural/architectural stone. Bio-CleanTM is designed to safely remove the most stubborn stains caused by oils, greases, dirt and chemical residues that are common in construction cleaning.• Environmentally friendly formula • Contains no acids or alkali• Safe for concrete, masonry, natural and architectural stones• Effective over a wide range of applications

Duz-ALLTM CONCENTRATED HEAVY DUTY

CONCRETE CLEANERCleanACT· Duz-AIITM is a general purpose, heavy duty, acidic cleaner for use on most standard concrete, colored concrete, pre-cast panel and concrete block surfaces. CleanACT· Duz-AIITM, is specially formulated to remove concrete splashes, excess mortar, retarders, heavy efflorescence, embedded stains, rust and surface soiling. It can be used to etch concrete.• Removes heavy efflorescence, embedded stains, and surface spalling • Improves adhesion of protective coatings and membranes• Strong solutions will etch concrete and can be used for additional aggregate exposure. • Effective over a wide range of applications

ASSRTM ACIDIC STAIN AND SCALE REMOVER

CleanACT· ASSRTM is a multi functional product that addresses a number of surface preparation needs. It is a blend of hydrochloric acid, surfactants and corrosion inhibitors. Must dilute with water.• Quickly dissolves calcium carbonate scales• Strong solutions will etch concrete and can be used for additional aggregate exposure.• Removes discoloration caused by algae • Mild odor

Re Storz-ITTM CONCENTRATED HEAVY DUTY CONCRETE CLEANERCleanACT Re Storz-ITTM is specially formulated to remove stains caused by acid rain, airborne contaminants, heavy carbon and other stains associated with highly populated areas. It is a concentrated acidic cleaner for use on most standard unpolished masonry. It is idealy suited for brick, granite, sandstone, slate, terra cotta and many other masonry surfaces. Must dilute with water.• Effectively cleans heavily soiled structures• Concentrated formula that easily dilutes in water• Strong acidic cleaner • Effective over a wide range of applications

CleanActTM

CONCRETE AND MASONRY CLEANERS

405-843-2585800-535-04339608 N. Robinson Ave. Oklahoma City, OK 73114 Fax: 405-843-2596

www.advchemtech.com

For Safety Data Sheets and Technical Data Sheets, go to www.advchemtech.com