davis center, university of vermont burlington, … · younho cho, pusan national university,...

-1-

Davis Center, University of Vermont

Burlington, Vermont July 16-19, 2018

PROGRAM

Monday, July 16, 2018

PLENARY SESSION 1 Leonard Bond, Chairperson

Silver Maple Ballroom

9:00 AM Opening Remarks ---Leonard J. Bond, Iowa State University, Center for NDE, Applied Sciences Complex II, 1915 Scholl Road, Ames, IA 50011

Welcome to Vermont

---Professor Yves Dubief, Department Head for Mechanical Engineering, University of Vermont, 206 Farrell, Burington, VT. 05405

9:15 AM NDE/SHM for Smart Cities ---Dr. Fu-Kuo Chang, Stanford University, Department of Aeronautics and Astronautics, 496

Lomita Mall, Stanford, California, 94305 10:15 AM Break

PLENARY SESSION 2 Pete Collins, Chairperson

Silver Maple Ballroom

10:30 AM Spatially Resolved Acoustic Sectroscopy (SRAS) Microstructural Imaging ---Matt Clark, University of Nottingham, Optics and Photonics Research Group, University Park,

Nottingham, UK NG72RD 11:20 AM A Challenging and Promising Effort Toward QNDE for Inaccessible and Invisible Defects;

Nonlinear Guided Wave NDE ---Younho Cho, Pusan National University, School of Mechanical Engineering, San 30, Jangjeon-

Dong, Geumjeong-Gu, 609-735, P(B)usan, The Republic of Korea 12:10 PM Lunch

-2-

Monday, July 16, 2018 Guided Waves I (Session I)

Peter Cawley Sugar Maple

1:30 PM (046) Guided Wave Inspection of a Comlicated Component John Jian, Alan Stansfield, Darren Chapman, Inspection Group, Nuclear Generation, EDF Engergy, Cloucester, UK

1:50 PM (273)

Multi-mode Guided Wave Scale and Corrosion Monitoring Abubaker Saeed, Saudi Aramco, Arno Volker and Erwin Giling, TNO, Oude Waalsdorperweg 63, 2597 AK The Hague

2:10 PM (027)

Guided Wave Sensitivity to Creep Damage Represented by Effective Material Property Variations Using Finite Element Modelling

Sam Horne1, Mike Lowe1, Peter Huthwaite1, Jimmy Fong2, 1Department of Mechanical Engineering, Imperial College London, England. 2Guided Ultrasonics Ltd., London, England

2:30 PM (063)

Defect Imaging for Plate-like Stuctures Using Diffuse Acoustic Wave Generated by Modulated Laser Takahiro Hayashi, and Shogo Nakao, Graduate School of Engineering, Kyoto University, Kyoto, Japan

2:50 PM (149)

Investigation of Higher-Order Guided Ulrasonic Waves in a Welded Plate Xudong Yu, Peng Zuo, and Zheng Fan, School of Mechanical and Aerospace Engineering, Nanyang Techonological University, 50 Nanyang Avenue, Singapore 639798

3:10 PM Break 3:30 PM (071)

Corrosion Tomography Based on Cutoff Property of A1 Mode Xuwei Cao, Liang Zeng, and Jing Lin, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China

3:50 PM (030)

Scattering of Tornional Guided Waves from Small Surface Cracks in Pipes Chien An Chua1, Peter Cawley1, and Peter B. Nagy1,2, 1Department of Mechanical Engineering, Imperial College, London, UK. 2Department of Aerospace Engineering and Engineering Mechanics, University of Cincinnatti, USA

4:10 PM (082)

Friction Stir Welded Lap Joint Inspection Using Ultrasonic Guided Waves Pierre Belanger, Mohammad Jahazi, Department of Mechanical Engineering, Ecole de Technologie Superieure, Montreal Canada

4:30 PM (123)

Non-Destructive Testing of Nuclear Structures Behind Screen using Leaky Lamb Waves Pierre Kauffmann1,2, Marie-Aude Ploix1, Jean-Francois Chaix1, Cecile Gueudre1, Gilles Corneloup1, and Francois Baque2, 1Aix Marseille Univ, CNRS, LMA, Marseille, France, 2CEA Cadarache DEN/DTN/STCP/LISM, Saint Paul Lez Durance, France

4:50 PM (000)

-3-

Monday, July 16, 2018 Additive Manufacturing I (Session II)

Surendra Singh, and Lucas Koester Co-Chairpersons Silver Maple

1:30 PM (278)

AM Paradigm- Benefits vs. Risks Surendra Singh, and Kevin Bunish, Advanced NDE and Sensores Technologies, Material Engineering, Honeywell Aerospace, Phoenix, AZ 85034

2:10 PM (308)

Non-Destructive Testing of Additively Manufactured Metal Test Artifacts Anne-Francoise Obaton1,2, Felix Kim1, Jared Tarr1, Alkan Donmez1, and Bryan Butsch3, 1Engineering Laboratory, NIST, Gaithersburg, Maryland, USA. 2LNE (French Metrology Institute) Paris, France. 3The Modal Shop, Cincinnatti, Ohio, USA

2:30 PM (144)

Characterization and Nondestructive Inspection of Additively Manufactured Materials Sarah L. Stair, David G. Moore, Nondestructive Evaluation Department, Sandia National Laboratories, Albuquerque, New Mexico

2:50 PM (010)

Non-Destructive Evaluation of Additively Manufactured Materials- Towards Online Inspection for Selective Laser Melting Matt Clark, Rikesh Patel, Paul Dryburgh, Don Pieris, Wenqi Li, Richard Smith, and Adam Clare, Optics and Photonics, Faculty of Engineering, University of Nottingham, Nottingham, UK.

3:10 PM Break 3:30 PM (087)

Detection of Pores in Additive Manufactured Parts by Near Field Response of Laser- Induced Ultrasound Timothy Bigelow, Benjamin Schneider, and Hossein Taheri, Department of Mechanical Engineering, Iowa State University, Ames, IA, USA

3:50 PM (128)

Fundamental Experimants of Eddy Current Testing for Additive Manufacturing Metallic Material Toward In-Process Inspection Noriyasu Kobayashi1, Setsu Yamamoto1, Azusa Sugawara1, Masayo Nakane1, Daisuke Tsuji1, Takehisa Hino1, Takahiro Terada2, and Makoto Ochiai1, 1Toshiba Energy Systems & Solutions Corp., Kanagawa, Japan; 2Toshiba Corp, Kanagawa, Japan

4:10 PM (138)

Comparison of Laser Triangulation, Phase-shift Triangulation and Swept Source Optical Coherence Tomography for Non-destructive Inspection of Objects with Micrometric Accuracy FB Djupkep Dizeu1, Maxime Rivard2, Jonathan Boisvert1, Guy Lamouche2, 1Computer Vision and Graphics, National Research Council Canada, Ottawa, Ontario, Canada; 2Optical Techniques, National Research Council Canada, Boucherville, Quebec, Canada

4:30 PM (305)

In-process Monitoring of Electrohydrodynamic Inkjet Printing using Machine Vision Hantang Qin, Center for Nondestuctive Evaluation, Iowa State University, Ames, IA, USA

4:50 PM (294)

Acoustic Monitoring of Additive Manufacturing for Damage and Process Condition Determination L. Koester, H. Taheri, L. Bond, E. Faierson, Center for Nondestruction Evaluation, Iowa State University, Ames, IA, USA

5:10 PM (307)

Infrared-assisted Acoustic Emission Process Monitoring for Additive Manufacturing Yuri Plotnikov, Dan Henkel, Jeffrey Burdick, Arthur French, John Sions, Commonwealth Center for Advanced Manufacturing, Disputanta, Virginia

-4-


Characterization of Polymer Matrix Composites (Session III) Cara Leckey and John Wertz, Co-Chairpersons

Frank Livak Room

1:30 PM (044) Ultrasonic Characterization of Polymer Matrix Composite Impact Delamination Field J.T. Welter1, J.C. Aldrin2, J.N. Wertz1, D. Zainey3, V. Kramb3, 1Materials State Awareness Branch, AFRL/RXCA, Wright-Patterson AFB OH; 2Computational Tools, Gurney, IL; 3University of Dayton Research Institute, Dayton, OH

1:50 PM (053) Towards Quantitative Characterization of 3D Morphology of Impact Damage in Polymer Matrix Composites for Ground Truth Representation Michael D. Uchic1, Sarah M. Wallentine1, Daniel M. Sparkman1, Sean P. Donegan1, Josiah M. Dierken2, Norman D. Schehl2, David A. Zainey2, 1Air Force Research Laboratory, Materials and Manufacturing Directorate, Wright-Patterson AFB, OH; 2University of Dayton Research Institute, Dayton, OH

2:10 PM (130) Ultrasound Forward Model Validation of Normal and Angle Beam Inspection of a Quasi-Isotropic Compostite Layup with Embedded Damage J. Wertz1, J. Dierken2, D. Zainey2, N. Schehl2, J.C. Aldrin3, 1Materials State Awareness Branch, AFRL, Wright-Patterson AFB, OH; 2University of Dayton Research Institute, Dayton, OH; 3Computational Tools, Gurney ,IL

2:30 PM (136) Dependence on Beam Width and Frequency of Ultrasonic Polar Backscatter-Based Measurements of Fiber Ply Angle in Composite Laminates Patrick H. Johnston, Nondestructive Evaluation Sciences Branch, NASA Langley Research Center, Hampton, VA

2:50 PM (230) Investigation of Pulse-echo and Pitch-catch Angled-beam Ultrasonic NDE for Characterization of Hidden Regions of Impact Damage in Composites John Aldrin2, John Welter1, John Wertz1, Eric Lindgren1, Sarah Wallentine1, Mike Uchic1, Vicki Kramb3, David Zainey3, Norm Schehl3, 1Air Force Research Laboratory, Wright-Patterson AFB, OH; 2Computational Tools, Gurney, IL; 3University of Dayton Research Institute, Dayton, OH

3:10 PM Break 3:30 PM (282)

Challenges and Solutions for Ultrasonic Phased-Array Inspection of Polymer-Matriz Composites at Production Rates Deborah Hopkins1, Michel Brassard2, 1BERCLI Corp., Berkley, CA; 2TD NDE, Vaudreuil Dorion, Quebec, Canada

3:50 PM (060) Qualitative Detection of Boron Nitride in Ceramic Matrix Composites Greg Ojard1, and Michael Taylor2, 1United Technologies Research Center, East Hartford, CT; 2Phoenix LLC, Madison WI

4:10 PM (194) Active Thermography by Inductive Excitation in Anisotropic Carbon Fiber Composites Martin Spies2, J. Guo1, E. Toma2, and U. Netzelmann2, 1Nondestructive Testing Research Center, School of Physical Science and Technology, Southwest Jiaotong University, Chengdu, PR China; 2Fraunhofer Institute for Nondestuctive Testing IZFP, Saarbruecken, Germany

4:30 PM (070) Optically Stimulated Electron Emission Analysis of Surface Contamination Levels on Epoxy Composites and Effect on Failure Mode Rodolfo Ledesma1, William Yost2, Frank Palmieri2, and John Connell2, 1Department of Electrical and Computer Engineering, Univeristy of Virginia, Charlottesville, VA; 2NASA Langley Research Center, Hampton, VA

4:50 PM (020) Damage Imaging in Composite Laminates Using Phase Reversal Method Kan Feng1, Zheng Li2, 1Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, Jiangsu, China; 2College of Engineering, Peking University, Beijing, China

-5-


Machine Learning & Statistical Methods in NDE I (Session IV) Joel Harley and Daniel Sparkman, Co-Chairpersons

Mildred Livak Room

1:30 PM (234) Machine Learning and NDE: Past, Present, and Future Joel Harley1, Daniel Sparkman2, 1Dept. of Electrical and Computer Eng., University of Florida, Gainesville, FL; 2AFRL/RXCA, Wright-Patterson AFB, OH

2:10 PM (065)

Ranked Set Sampling Applied to Hit-Miss Probability of Detection Data: A Case Study Christine Henry1, Christine Schubert Kabban2, Matthew Cherry1, Ryan Mooers1, 1Air Force Research Laboratory, Materials & Manufacturing, Wright-Patterson AFB, OH; 2Air Force Institute of Technology, Dept. of Mathematics & Statistics, Wright-Patterson AFB, OH

2:30 PM (069)

POD for Automatic Detection of Cracks About Fasteners Without Fastener Removal PR Underhill, CO Uemura, and TW Krause, Dept. of Physics and Astrophysics, Royal Military College of Canada

2:50 PM (084)

Application of Recent Mathematical Results to Eddy Current Problems Amanda Criner, John Aldrin, and Matt Cherry, Air Force Research Laboratory, Wright-Patterson AFB, OH

3:10 PM Break

3:30 PM (092)

Multifidelity Model-Assisted Probability of Detection via Cokriging Xiaosong Du, and Leifur Leifsson, Department of Aerospace Engineering, Iowa State University, Ames, IA

3:50 PM (101)

Statistical Inversion of Eddy Current Measurements of Flaws in Titanium L. Homa2, J. Aldrin3, M. Cherry1, 1Air Force Research Laboratory, Wright-Patterson AFB, OH; 2University of Dayton Research Institute, Dayton, OH; 3Computational Tools, Gurnee, IL

4:10 PM (103)

A Damage Localization and Quantification Algorithm for Indirect structural Health Monitoring of Bridges Using Multi-Task Learning Jingziao Liu1, Mario Berges1, Jacobo Bielak1, James Garrett1, Jelena Kovacevic2, and Hae Young Noh1, 1Dept. of Civil & Environmental Engineering, Carnegie Mellon University, Pittsburgh, PA; 2Dept. of Electrical & Computer Engineering, Carnegie Mellon University, Pittsburgh, PA

4:30 PM (189)

Automatic Defect Localization and Characterization Through Machine Learning Based Inversion for Guided Wave Imaging in SHM Roberto Miorelli1, Andrii Kilakovskyi1,2, Olivier Mesnil1, and Oscar D’Almeida2, 1NDE Department CEA LIST, Saclay, France; 2Safran Tech, Magny-Les-Hameaux, France

4:50 PM (226)

Demonstration of Using Signal Feature Extraction and Deep Learning Neural Networks with Ultrasonic Inspection Data for Detecting Challenging Discontinuities in Composite Panels John Aldrin1, David Forsyth2, 1Computational Tools, Gurnee, IL; 2TRI/Austin, Austin, TX

-6-

Tuesday, July 17, 2018 Guided Waves II (Session I)

Peter Cawley Sugar Maple

8:30 AM (193) Characterization of Adhesive Shear Modulus in Bonded Stiffeners using Ultrasonic Guided Waves Daniel Pereira, Pierre Belanger, Dept. of Mechanical Engineering, Ecole de Technologie Superieure, Montreal, Canada

8:50 AM (169) Defect Detection in Monocrystalline Silicon Wafers Using High Frequency Guided Waves

Paul Fromme2, Bernard Masserey1, Michael Lauper1, and Jean-Luc Robyr1, 1Dept. of Mechanical Engineering, University of Applied Sciences, Fribourg, Switzerland; 2Dept. of Mechanical Engineering, University College London, UK

9:10 AM (014) Theoretical and Experimental Investigation on Interaction of Guided Lamb Wave with

Disbond in Adhesively Bonded Joint Menglong Liu1, Kai Wang2, Zhongqing Su2, Fangsen Cui1, 1Institute of High Performance Computing, A*STAR, Singapore; 2Dept. of Mechanical Engineering, The Hong Kong Polytechnic University, Hong Kong, P.R. China

9:30 AM (112) Propagation Behavior of Guided Waves in CFRP Panels with Joint Parts

Fumiko Mori, and Tomohiro Yokozeki, Dept. of Aeronautics and Astronautics, University of Tokyo, Tokyo, Japan

9:50 AM (122) Baseline-Free Damage Detection of Composite Laminates by Using Time Reversal of Lamb

Waves Liping Huang, Liang Zeng, and Jing Lin, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China

10:10 AM Break 10:30 AM (227) Lamb Wave Propagation in a Plate with Step Discontinuities Using Effective Boundry

Method Hussain Alqahtani1, Christoph Schaal3, and Ajit Mal1, 1Mechanical and Aerospace Engineering Dept., University of California, Los Angeles, CA; 2Dept. of Mechanical Engineering, King Fahd Univ. of Petrol & Minerals, Dhahran, Daudi Arabia; 3Dept. of Mechanical Engineering, California State University, Northridge, CA

10:50 AM (240) Expanding Upon the Applications of the Partial Wave Method and Developing a More

Detailed Understanding of Guided Waves Christopher Hakoda, and Cliff Lissenden, Department of Engineering Science and Mechanics, Pennsylvania State University, University Park, PA

11:10 AM (126) Trailing Waves for Nondestructive Testing of Thick Plates Yongsheng Shao, and Jing Lin, School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China

11:30 AM (032) Investigation of Ultrasonic Guided Wave Propagation in Rail Tracks Based on Floquet-Bloch

Theory Maodan Yuan, and Xuanrong Ji, Dept. of Electromechanical Engineering, Guangdong University of Technology, Guangzhou, China

11:50 AM (185) A Model for Ultrasonic Guided Waves in a Cortical Bone Plate Coupled With a Soft-Tissue

Layer Haidang Phan1, Hoai Nguyen2, and Phuong Thuy Nguyen2, 1Institute of Mechanics, Vietnam Academy of Science & Technology, Vietnam; 2Institute of Physics, Vietname Academy of Science & Technology, Vietnam

12:10 PM Lunch

-7-

Tuesday, July 17, 2018 Additive Manufacturing II (Session II)

Surendra Singh and Pete Collins, Co-Chairpersons Silver Maple

8:30 AM (211)

Direct Printing of Graphene Sensors for Health Monitoring of Additively Manufactured Structures Russell Wincheski1, John Gardner1, Godfrey Sauti1, Anthony Ruth2, Elaine McVay3, and Emilie Siochi1, 1NASA Langley Research Center, Hampton, VA; 2NSTRF Fellow, University of Notre Dame, Notre Dame, IN; 3NSTRF Fellow, Massachusetts Institute of Technology, Cambridge, MA

8:50 AM (178) Millimeter Wave Inspection of Additive Manufactured Non-Conductive Materials MT Ghasr1, Y. Gao1, A. Boots1, J. Birt1, R. Zoughi1, T. Lou2, and D. Palmer2, 1AMNTL, Electrical and Computer Engineering Dept., Missouri University of Science and Technology, Rolla MO; 2Boeing Research & Technology, St. Louis, MO

9:10 AM (077)

Intentional Weld Defect Process: From Manufacturing by Robotic Welding machine to Inspection using TFM Phased Array Anthony Gachagan Yashar Javadi, Momchil Vasilev, Charles MacLeod, Stephen Pierce, Riliand Su, Carmelo Mineo, and Jerzy Dziewierz, Centre for Ultrasonic Engineering, Dept. of Electronic & Electrical Engineering, University of Strathclyde, Glasgow, UK

9:30 AM (086)

Ultrasonic Characterization of Pores in Ti-6Al-4V Produced by SLM Additive Manufacturing Yu Liu1, Yongfeng Song1, Chao Chen2, Joseph A. Turner3, Xiongbing Li1, 1School of Traffic and Transportation Engineering, Central South University, Changsha, Hunan, Chin;, 2State Key Laboratory of Powder Metallurgy, Central South University, Changsha, China; 3Mechanical and Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

9:50 AM (221)

Resonant Acoustic Nonlinearity and Loss in Additively Manufactured Stainless Steel Ward Johnson1, Justin Whiting2, Paul Heyliger3, Kristen Genter4, and Nik Hrabe1, 1NIST, Applied Chemicals & Materials Division, Boulder, CO; 2NIST, Intelligent Systems Division, Gaithersburg, MD; 3Colorado State University, Dept. of Civil & Environmental Engineering, Fort Collins, CO; 4NIST, Applied Physics Division, Boulder, CO

10:10 AM Break 10:30 AM (223)

Detection of Additive Manufacturing Defects Using X-ray Computed Tomography Felix Kim1, Shawn Moylan1, Adam Pintar1, Edward Garboczi2, John Slotwinski3, 1NIST, Gaithersburg, MD; 2NIST, Boulder, CO; 3Johns Hopkins University of Applied Physical Laboratory, Laurel, MD

10:50 AM (231) Using X-ray CT to Assess Defects in Additive Manufactured Material to Investigate Process, Stucture, Properties Relationships for the Qualification of Aviation Components Jay Waterman1, Brandi Briggs1, Steven Storck2, 1Naval Air Systems Command; 2Johns Hopkins University Applied Physics Laboratory

11:10 AM (301) Determination of Porosity in Additively Manufactured Metal Parts Using X-ray Computed Tomography William Green, Jennifer Sietins, and Brandon McWilliams, US Army Research Laboratory, Aberdeen Proving Ground, MD

11:30 AM (314)

Digital Process Control System Software for Metal Additive Manufacturing with Aerospace Alloys Mark Cola1, Darren Beckett1, Lars Jacquemetton1, Scotts Betts1, and R. Bruce Madigan2, 1Sigma Labs Inc., Santa Fe, NM; 2Montana Tech University, Butte, MT

12:10 PM Lunch

-8-

Tuesday, July 17, 2018 Thermography and Thermosonics I (Session III)

Xiaoyan Han and Steve Holland, Co-Chairpersons Frank Livak Room

8:30 AM (239)

Study the Vibration Behavior and Relate Individual Frequency of Induced Sound Waves and Energy Consumption in Defects in Sonic Infrared Imaging Qiuye Yu, Omar Obeidat, Xiaoyan Han, Dept. Of Electrical & Computer Engineering, Wayne State University, Detroit, MI

8:50 AM (210)

The Eddy Current Pilsed Thermography Detection of Fatigue Crack Closure Jianping Peng, Kang Zhang, Jie Bai, Zhu He, and Chaoyong Peng, School of Physical Science & Technology, Southwest Jiaotong University, Chengdu, China

9:10 AM (191)

Further Investigation on Profiling Defect Depth in Composite Materials Using Thermal Imaging NDE Omar Obeidat, Qiuye Yu, Xiaoyan Han, Dept. of Electrical & Computer Engineering, Wayne State University, Detroit, MI

9:30 AM (181)

Application of Active Mircrowave Thermography to Inspection of CFRP Structures with Radar Absorbing Material Coatings Mohammad Tyeb Ghasr, Ali Mirala, and Kristen Donnell, Applied Microwave Nondestructive Testing Laboratory, Dept. of Electrical & Computer Engineering, Missouri University of Science & Technology, Rolla, MO

9:50 AM (177)

Iterative Numerical 2D-Modeling for Quantification of Material Defects by Pulsed Thermography Raphael Bernegger, Simon Altenburg, and Christiane Maierhofer, Division 8.7-Thermographic Methods, Bundesanstalt fur Materialforschung und –prufung, Berlin, Germany

10:10 AM Break 10:30 AM (171)

Characterization of Damage Formation in a Composite Single Stringer Hat Stiffened Panel using Passive Thermography Joseph Zalameda, William Winfree, and Michael Horne, NASA Langley Research Center, Hampton, VA

10:50 AM (152)

Laser Lock-in Thermography on Dental Inspection Andrew Ngo Chun Yong1, Lu Ding1, Lu Shen2, Hiong Yap Gan2, 1Institute of Materials Research and Engineering, Singapore; 2Singapore Institute of Technology, Singapore

11:10 AM (134)

Fast Simulation Approach Dedicated to Infrared Thermographic Inspection of Delaminated Planar Pieces Almpion Ratsakou1, Christophe Reboud1, Anastasios Skarlatos1, and Dominique Lesselier2, 1CEA, LIST, Gif-ur-Yvette, France; 2Laboratoire des Signaux er Systemes, Gif-sur-Yvetter, France

11:30 AM (097)

In-situ Thermal Inspection of Automated Fiber Placement Manufacturing Peter Juarez, and Elizabeth Gregory, NASA Langley Research Center, Hampton, VA

11:50 AM (078)

Damage Characterization from Passive Thermography Harmonic Responses William Winfree, and Joseph Zalameda, NASA Langley Research Center, Hampton, VA

12:10 PM Lunch

-9-

Tuesday, July 17, 2018 Oil & Gas (Session IV)

Yang Liu Mildred Livak Room

8:30 AM (094)

Casing Eccentering Sensitivity of Pulsed Eddy Current Sensors in Multiple-Casing Corrosion Analysis Saad Omar, and Dzevat Omeragic, Schlumberger-Doll Research, Cambridge, MA

8:50 AM (182) Acoustic Modeling of Multi-String Cased-Wellbores to Characterize Cement Damage Yang Liu, Ralph D’Angelo, Mihir Patel, Sandip Bose, and Smaine Zeroug, Schlumberger-Doll Research, Cambridge, MA

9:10 AM (183)

Machine Learning for the Automated Detection of Diagnosis-Revealing Features on Leaky Flexural Wave Imager Data Vasileios-Marios Gkortsas, Sandip Bose, and Smaine Zeroug, Schlumberger-Doll Research, Cambridge, MA

9:30 AM (276) On Ultrasonic Imaging Through a Double Steel String with the Leaky Flexural Mode Smaine Zeroug1, Ralph D’Angelo1, Sandip Bose1, M. Skataric1, I.A. Merciu2, Kevin Constable3, 1Schlumberger-Doll Research, Cambridge, MA; 2Statoil ASA, Research & Technology, Rotvoll, Norway; 3Statoil ASA, Development & Production, Bergen, Norway

9:50 AM (280)

Experimental Investigation of Acoustic Features Associated with Cement Damage in Double Cased-Wellbores Yang Liu1, Ralph D’Angelo1, Lingchen Zhu1, Mihir Patel1, Sandip Bose1, Smaine Zeroug1, I.A. Merviu2, and Kevin Constable3, 1Schlumberger-Doll Research, Cambridge, MA; 2Statoil ASA, Research & Technology, Rotvoll, Norway; 3Statoil ASA, Development & Production, Bergen, Norway

10:10 AM Break 10:30 AM (286)

Design of the Detection Probe Based on ACFM Jianyu Li, Laibin Zhang, Wenpei Zheng, and Yijing Feng, College of Mechanical & Transportation Engineering, China University of Petroleum, Beijing, China

10:50 AM (304) Collimated Acoustic Beams from Radial Modes of Piezoelectric Disc Transducers Vamshi Krishna Chillara, Cristian Pantea, and Dipen Sinha, Material Physics & Applications, Los Alamos National Laboratory, NM

11:10 AM (049)

High Speed and High Accuracy Inspection Technology for Heat Exchanger Tube of Carbon Steel Toyokazu Tada, and Hidehiko Suetsugu, Production & Safety Fundamental Technology Center, Sumitomo Chemical Co., Niihama City, Japan

11:30 AM (035) Characterization by Non-Destructive Magnetic Technique of Steam Reformer Tubes Joao Rebello1, Monica Arenas1,2, Clara Pacheco2, Artur Ribeiro3, Helena Ramos3, Carlos Eckstein4, Laudemiro Nogueira4, Luiz de Almeida1, and Gabriela Pereira1,2, 1Dept. Metallurgical & Materials Engineering, Federal University of Rio de Janeiro, Brazil; 2Non-Destructive Testing, Corrosion & Welding Lab, Rio de Janeiro, Brazil; 3Instituto de Telecomunicacoes, Instituto Superior Tecnico, Universidade d Lisboa, Lisbon, Portugal; 4Petrobras, Rio de Janeiro, Brazil

11:50 AM (203)

Error Analysis and Alignment for a Structured Light Probe System Designed for Internal Pipework Inspection William Jackson, Gordon Dobie, Graeme West, Stephen Marshall, and Charles MacLeod, Centre for Ultrasonic Engineering, Dept. of Electronic & Electrical Engineering, University of Strathclyde, Glasgow, UK

12:10 PM Lunch

-10-

Tuesday, July 17, 2018 POSTER SESSION

1:00 – 3:00 PM

NOTE: All posters will be displayed continuously from 1:00 p.m. on July 16 (Monday) until 5:00 p.m. on July 18 (Wednesday). Participants will have the opportunity to speak with presenters to ask questions during the Tuesday session. Presenters will need to remove their poster displays by 5:00 pm Wednesday evening. QNDE Programs cannot be responsible for poster displays that are not removed. Full poster listing on pages 33-35.

-11-

Tuesday, July 17, 2018

Guided Waves III (Session I) Peter Cawley Sugar Maple

3:30 PM (031) Procedure for the Evaluation of the Performance of an Installed SHM System Sebastian Heinlein1, Stefano Mariani1, Peter Cawley1, and Thomas Vogt2, 1Imperial College, London, UK; 2Guided Ultrasonics Ltd., Brentford, UK

3:50 PM (001)

Multi-Stage Damage Detection Method Based on Lamb Waves Zheng Li, M. Saqib Hameed, Qi Jiahong, and Jianlin Chen, State Key Laboratory for Turbulence & Systems, College of Engineering, Peking University, Beijing, China

4:10 PM (073)

Matching Pursuit with Novel Dispersive Dictionary for Mode Separation in Guided Wave Signals Obtained from Pipes Peter WT Tse, and Javad Rostami, SEAM and CNDT, Dept. of Systems Engineering & Engineering Management, City University of Hong Kong, Hong Kong, China

4:30 PM (011)

A Theoretical Approach for Guided Waves in Layered Structures with Application in Bone Quantitative Ultrasound Haidan Phan1, Younho Cho2, Chi Vinh Pham3, Hoai Nguyen4, Tinh Quoc Bui5, 1Institute of Mechanics, Vietnam Academy of Science & Tech, Vietnam; 2School of Mechanical Engineering, Pusan National University, South Korea; 3Faculty of Mathematics, Mechanics & Informatics, Hanoi University of Science, Vietnam; 4Institute of Physics, Vietnam Academy of Science & Tech, Vietnam; 5Dept. of Civel & Enviornmental Engineering, Tokyo Institute of Technology, Tokyo, Japan

4:50 PM (016)

A Novel Approach to Guided Wave Motion in Hollow Cylinders with Application to Nondestuctive Evaluation Quang Hung Le1, Haidang Phan2, Duc Tho Le3, 1Graduate University of Science & Tech., VAST/Petro Vietnam Marine Shipyard, Vietnam; 2Institute of Mechanics, Vietnam; 3School of Mechanical Engineering, Hanoi University of Science and Tech., Vietnam

-12-


Machine Learning & Statistical Methods in NDE II (Session II) Joel Harley and Daneil Sparkman, Co-Chairpersons

Silver Maple

3:30 PM (245) Polar Sparse Wavenumber Analysis for Guided Wave Reconstruction Soroosh Sabeti1, Joel Harley2, 1Dept. of Electrical & Computer Engineering, University of Utah, Salt Lake City, UT; 2Dept. of Electrical & Computer Engineering, University of Florida, Gainesville, FL

3:50 PM (246)

Transfer Learning of Ultrasonic Guided Waves: A Preliminary Study with Autoencoders Joel Harley1, and K. Supreet Alguri2, 1Dept. of Electrical & Computer Engineering, University of Florida, Gainesville, FL; 2Dept. of Electrical & Computer Engineering, University of Utah, Salt Lake City, UT

4:10 PM (258)

Singular Value Based Damage Statistics for Guided Wave Structrual Health Monitoring Alexander Douglass1, Joel Harley2, 1Dept. of Mechanical Engineering, University of Utah, Salt Lake City, UT; 2Dept. of Electrical & Computer Engineering, University of Florida, Gainesville, FL

4:30 PM (285)

A Machine Leaning Approach for Classification Tasks of ECT Signals in Steam Generator Tubes Nearby Support Plate Christophe Reboud, Anastassios Skarlatos, and Roberto Miorelli, CEA LIST, Saclay, France

4:50 PM (019)

Automated Defect Detection for Fluorescent Penetrant Inspection using Machine Learning NJ Shipway1, P. Huthwaite1, MJS Lowe1, and T Barden2, 1Imperial College London, London, UK; 2Rolls-Royce Plc., London, UK

-13-


Thermography & Thermosonics II (Session III) Xiaoyan Han and Steve Holland, Co-Chairpersons

Frank Livak Room

3:30 PM (252) Micromechanics Modeling of Vibrothermography Stephen Holland, Ashraf Bastawros, Bryan Schiefelbein, Tyler Lesthaeghe, Christopher Giuffre, Henry Moldenhauer, and Chevonne McInnis, Center for NDE, Iowa State University, Ames, IA

3:50 PM (270)

Flash Thermography of Non-Trivial Geometries Stephen Holland, and Chevonne McInnis, Center for NDE, Iowa State University, Ames, IA

4:10 PM (288)

Finite Element Simulation of Vibrothermography of Cracked and Notched Plates Alireza Kermani, Nagy Elabbasi, Zhong Ouyang, Veryst Engineering, Needham, MA

4:30 PM (119)

Induction Infrared Thermography for Non-Destructive Evaluation of Alloy Sensitization Emily Guzas1, Matthew Roberts2, and Kevin Wang2, 1Naval Undersea Warfare Center, Newport, RI; 2Virginia Polytechnic Institute and State University, Blacksburg, VA

-14-


Sensors, Transducers, and Probes (Session IV) Bernhard Tittmann Mildred Livak Room

3:30 PM (261)

Listening to Temperature: Ultrasonic Non-Destructive Identification of Material Phase and Temperature Taylor Jeffrey, and David Jack, Dept. of Mechanical Engineering, Baylor University, Waco, TX

3:50 PM (244)

Field Deployable Spray-on Ultrasonic Coatings for High-Temperature Application YP Trivedi1, BR Tittmann1, C Batista1, JL Xu2, C Lissenden1, 1Dept. of Engineering Science & Mechanics, Pennsylvania State University, University Park, PA; 2Dept. of Acoustics, Pennsylvania State University, University Park, PA

4:10 PM (220)

Magnetostrictive Cold Spray Sensor for Harsh Environment and Long-Term Condition Monitoring SW Glass1, JP Lareau1, KS Ross1, S Ali2, F Hernandez2, B Lopez2, 1Pacific Northwest Nation Lab, Richland, WA; 2Innerspec Technologies Inc, Forest, VA

4:30 PM (057)

In-situ Monitoring of Rectangular Bar Specimens Manton Guers1, and Bernhard Tittmann2, 1Penn State University Applied Research Lab, Arlington, VA; 2Engineering Science & Mechanics Dept. State College, PA

4:50 PM (165)

Simulation Analysis of a Micro-Strip Strain Sensor Based on RFID Shuo Wen, Guorong Song, Yan Lyu, Bin Wu, Cunfu He, College of Mechanical Engineering and Applied Electrobics Technology, Beijing University of Technology, Beijing, China

-15-


Microwave, Millimeter Wave & Terahertz NDE (Session V) Thomas Chiou and Yuri Plotnikov, Co-Chairpersons

Jost Foundation Room

3:30 PM (142) Thickness Determination for Wet Coatings on Composite Materials Using Terahertz wave Thechnologies Takeru Oohashi, Masahiro Hato, and Hiroaki Hatanaka, Production Technology Dept., Production Engineering Center, Corporate Research & Development, IHI Corporation, Yokohama, Japan

3:50 PM (289)

Classification of Haploid Corn Kernels using Terahertz Time Domain Spectroscopy and Machine Learning Jared Taylor, Chien-Ping Chiou, and Leonard Bond, Center for NDE, Iowa State University, Ames, IA

4:10 PM (309)

Infrared Evaluation and Analysis of Electric Cables in Nuclear Power Plants Chien-Ping Chiou, Adam Gjersvik, and Nicola Bowler, Center for NDE, Iowa State University, Ames, IA

4:30 PM (292)

Terahertz Evaluation of Porous Ceramic Layered Media John Nagel, Chien-Ping Chiou, Leonard Bond, and Waled Hassan, Center for NDE, Iowa State University, Ames, IA

4:50 PM (317)

Subsurface moisture characterization for sustainable concrete structures using imaging radar T. Yu, Z. Al-Zeyadi, J. Hu, Q. Tang, C. Ingemi; Dept. of Civil & Environmental Engineering, University of Massachusetts Lowell, Lowell, MA

-16-

Wednesday, July 18, 2018 Materials Characterization (Session I)

Chairperson TBD Sugar Maple

8:30 AM (058) Nondestructive Evaluation of Interfacial Bond Strength in Single Lap Joints via Swept Frequency Ultrasonic Phase Measurements Harold Haldren1, Daniel Perey2, William Yost2, K. Elliot Cramer2, Mool Gupta1, 1Dept. of Electrical & Computer Engineering, University of Virginia, Charlottesville, VA; 2NASA Langley Research Center, Hampton, VA

8:50 AM (215) PCRT Inversion for Material Characterization and Digital Twin Calibration Alexander Mayes2, Julieanne Heffernan2, Leanne Jauriqui2, Richard Livings2, Eric Biedermann2, John Aldrin3, Brent Goodlet4, Siamack Mazdiyasni1, 1Air Force Research Lab, Wright-Patterson AFB, OH; 2Vibrant Corp., Albuquerque, NM; 3Computational Tools, Gurnee, IL; 4University of California Santa Barbara, Santa Barbara, CA

9:10 AM (236) An Experimental Measurement Technique to Determine Single Crystal Elastic Properties in a Polycrystalline Material with Resonance Ultrasound Spectroscopy T.J. Lesthaeghe, and S.D. Holland, Center for NDE, Iowa State University, Ames, IA

9:30 AM (216) Validation of Process Compensated Resonance Testing (PCRT) Sorting Modules Trained with Modeled Data Julieanne Heffernan2, Alexander Mayes2, Richard Livings2, Leanne Jauriqui2, Eric Biedermann2, Siamack Mazdiyasni1, 1Air Force Research Lab, Wright-Patterson AFB, OH; 2Vibrant Corp., Albuquerque, NM

9:50 AM (017) Vibro-Acoustic Amplitude and Frequecy Modulations during Fatigue Damage Evolution Behnoush Golchinfar1, Dimitri Donskoy1, Majid Ramezani1, Marcus Rutner2, Sophia Hassiotis1, 1Stevens Institute of Technology; 2Hamburg University of Technology, Germany

10:10 AM Break 10:30 AM (102)

Applicability of Statistical Methods to a Mixed Experimental and Simulated Study for Optimizing Ultrasonic Characterization Approach for Impact Damage in Composites Victoria Kramb3, John Welter1, Christine Henry1, John Wertz1, John Aldrin2, David Zainey3, 1Air Force Research Lab., Wright-Patterson AFB, OH; 2Computational Tools, Gurnee, IL; 3University of Dayton Research Institute, Dayton, OH

10:50 AM (174) Detection of Disbonds in Multi-layered Aluminum Plates by Local Wavenumber Estimation of Guided Ultrasonic Waves Jakub Spytek, Lukasz Ambrozinski, Kajetan Dziedziech, Lukasz Pieczonka, AGH University of Science and Technology, Krakow, Poland

11:10 AM (254) Acoustic Emission Source localization in Quasi-Isotropic Composite Laminates Yingang Yi, and Jingjing He, School of Reliability & Systems Engineering, Beihang University, Beijing, China

11:30 AM (196) Resonance-based Characterization of the Vibration Properties of Shunted Piezoelectric Crystals Carson Willey2, Matthew Cherry1, Abigail juhl1, Rasheed Adebisi3, 1Air Force Research Lab, Materials & Manufacturing Directorate, WPAFB, OH; 2UES Inc., WPAFB, OH; 3University of Dayton Research Institute, Structural Integrity Division, Dayton, OH

11:50 AM (018) Quantitative Perfomance Analysis of Ultrasonic Detection of Corrosion Rate Changes Fangxin Zou1,2, Frederic Cegla2, 1Interdisciplinary Division of Aeronautical & Aviation Engineering, Hong Kong Polytechnic University, Hong Kong; 2Non-Destructive Evaluation Group, Dept. of Mechanical Engineering, Imperial College London, London, UK

12:10 PM Lunch

-17-

Wednesday, July 18, 2018

Microstructure Characterization (Session II) Ron Roberts and Joseph Turner, Co-Chairpersons

Silver Maple

8:30 AM (095) Diffuse Ultrasonic Backscatter Measurement with Limited Data Yongfeng Song1, Joseph Turner2, Jie Zhang3, Xiongbing Li1, 1School of Traffice & Transportation Engineering, Central South University, Changsha, Hunan, China; 2Dept. of Mechanical & Materials Engineering, Univeristy of Nebraska-Lincoln, Lincoln, NE; 3Dept. of Mechanical Engineering, University of Bristol, Bristol, UK

8:50 AM (156) Coherent Ultrasonic Backscatter within a Textured Titanium Alloy James Blackshire1, Jeong Na2, and Kevin Daugherty1, 1Air Force Research Lab, Wright-Patterson AFB, OH; 2KBR-WYLE Labs., Beavercreek, OH

9:10 AM (250) Diffuse Ultrasonic Backscatter in Simulated Polycrystalline Materials Joseph Turner, Musa Norouzian, and Nathanial Matz, Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

9:30 AM (247) Use of Digital Microstructures for Improved Ultrasonic Scattering Models for Elongated Grains Joseph Turner1, Musa Norouzian1, and Andrea Arguelles2, 1Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE; 2Brimrose Technology Corp., Hunt Valley, MD

9:50 AM (166) Multi-Gaussian Beam Effects on Pitch/Catch Diffuse Ultrasonic Backscatter Ping Hu1, Yongfeng Song2, Xiongbing Li2, and Joseph Turner3, 1School of Power & Mechanical Engineering, Wuhan University, Wuhan, Hubei, China; 2School of Traffic & Transportation Engineering, Central South Univeristy, Changsha, Hunan, China; 3Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

10:10 AM Break 10:30 AM (251)

Ultrasonic Attenuations Derived from Synthetic Three-Dimensional Microstructures Musa Norouzian, Joseph Turner, Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

10:50 AM (249) Influence of Microstructural Grain-size Distribution on Ultrasonic Scattering Musa Norouzian, Showmic Islam, Joseph Turner, Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

11:10 AM (026) Effect of Grain Elongation on Wave Propagation in Polucrystalline Materials Ming Huang1, Gaofeng Sha2, Anton Van Pamel1, Peter Huthwaite1, Stanislav Rokhlin2, Michael Lowe1, 1Dept. of Mechanical Engineering, Imperial College London, UK; 2Dept. of Materials Science & Engineering, Ohio State University, Columbus, OH

11:30 AM (283) Detection of Microtexture Regions in Titanium Turbine Disks Using Process Compensated Resonance testing; A Modeling Study Eric Biedermann2, Richard Livings2, Alex Mayes2, Julieanne Heffernan2, Leanne Jauriqui2, Brent Goodlet3, John Aldrin4, Siamack Mazdiyasni1, 1Air Force Research Lab., Wright-Patterson AFC, OH; 2Vibrant Corp., Albuquerque, NM; 3University of California Santa Barbara, Santa Barbara, CA; 4Computational Tools, Gurnee, IL

11:50 AM (312) Model Development for UT Inspection of Anisotropic Materials Ron Roberts, Center for NDE, Iowa State University, Ames, IA

12:10 PM Lunch

-18-


Nuclear Power (Session III) Bill Glass and Pradeep Ramuhalli, Co-Chairpersons

Frank Livak Room

8:30 AM (202) Advances in Modelling the Eddy Current Inspection of Steam Generator Tubes Edouard Demaldent, Anastasios Skarlatos, and Christophe Reboud, CEA LIST, Gif-sur-Yvette, France

8:50 AM (243)

Pulsed Eddy Current Probe Optimization for Steel Pipe Wall Thickness Measurement TW Krause1, KF Faurschou1,2, PR Underhill1, J Morelli2, 1Dept. of Physics & Space Science, Royal Military College of Canada, Kingston, ON, Canada; 2Dept. of Physics, Engineering Physics & Astronomy, Queen’s University, Kingston, ON, Canada

9:10 AM (064) A Non-Contact Ultrasonic Sensor for Pipe-Wall Thinning Inspection of Nuclear Power Plants Akinori Tamura1, Masao Endo1, Naoyuki Kono1, Hiroshi Okazawa2, Shinobu Okido2, Maria Kogia3, Chenghuan Zhong3, Erik Fabre3, Anthony Croxford4, and Paul Wilcox4, 1Hitachi Ltd., Hitachi, Ibaraki, Japan; 2Hitachi-GE Nuclear Energy Ltd., Hitachi, Ibaraki, Japan; 3Inductosense Ltd., Bristol, England, UK; 4University of Bristol, Bristol, England, UK

9:30 AM (176)

Probability of Detection Curves for Dissimilar Metal Welds as Input to Probabilistic Fracture Mechanic Code Bruce Lin1, and Ryan Meyer2, 1US Nuclear Regualtory Commision, Rockville, MD; 2Pacific Northwest Nation Lab., Richland, WA

9:50 AM (214)

Multiple Scattering Filtering for Volumetric and Plane Defects Andreas Schumm1, Nicolas Paul2, Pierre-Emile Lhuillier1, Camille Trottier1, Alexandre Aubrey3, and Arnaud Derode3, 1Electricite de France R&D, More sur Loing, France; 2Electricite de France R&D, Chatou, France; 3Institut Langevin, Paris, France

10:10 AM Break 10:30 AM (225)

Review of Additive Manufacturing for Reactor Materials & Components Amy Hull, C. Moyer, and J Burke, US Nuclear Regulatory Commission, Rockville, MD

10:50 AM (229)

Evaluating the Effectiveness of Nondestructive Examinations for Spent Fuel Storage Canisters Bruce Lin1, Darrell Dunn1, and Ryan Meyer2, 1US Nuclear Regulatory Commission, Rockville, MD; 2Pacific Northwest Nation Lab., Richland, WA

11:10 AM (217)

Performance of EMATs for Robotic Inspection of Cracks in Welded Stainless Steel Canisters Cliff Lissenden1, H. Cho1, and S. Choi2, 1Dept. of Engineering Science & Mechanics, Penn State, PA; 2School of Mechanical Engineering, Hanyang University, Seoul, South Korea

11:30 AM (099)

Acoustic Measurement Infrastructure to Characterize Nuclear Reactor Operation James Smith, and Vivek Agarwal, Measurement Sciences, Idaho National Lab., Idaho Falls, ID

11:50 AM (218)

Inter-Digital Capacitive Sensor for Evaluation Cable Jacket and Insulation Aging Bill Glass1, LS Fifield1, N Bowler2, A Sriraman2, WC Palmer2, 1Pacific Northwest National Labs., Richland, WA; 2Iowa State University, Ames, IA

12:10 PM Lunch

-19-

Wednesday, July 18 2018

Transduction (Session IV) Daniel Levesque and Sunil Chakrapani, Co-Chairpersons

Mildred Livak Room

8:30 AM (291) Air Coupled Ultrasonic NDE: An Overview Krishnan Balasubramaniam, Mechanical Engineering and Centre for NDE, Indian Institute of Technology Madras, Chennai, India

9:10 AM (059)

Laser-Ultrasonic Inspection of Cold Spray Additive Manufacturing Components Daniel Levesque, Christophe Bescond, and Cristian Cojocaru, National Research Council Canada, Boucherville, Quebec, Canada

9:30 AM (100)

Design of a Laser Shock System for a Remote Nuclear Radiation Environment James Smith1, Marc Choquet2, Daniel Levesque3, 1Measurement Sciences, Idaho National Lab., Idaho Falls, ID; 2Tecnar Automation Ltee., Saint-Bruno, Quebec, Canada; 3Nation Research Council Canada, Boucherville, Quebec, Canada

9:50 AM (121)

Feasibility of using a Fully 3D Laser-based Transduction System for Monitoring the Integrity of I-Beams using Rayleigh Waves Peter W. Tse, Faeez Masurkar, and Kim Ming Ng, SEAM CNDT, Dept. of Systems Engineering & Engineering Management, City University of Hong Kong, Ching

10:10 AM Break 10:30 AM (161)

Using Zero-Group-Velocity Lamb Waves to Determine Thickness and Bulk Sound Velocities of Isotropic Plates Clemens Grünsteidl, Thomas Berer, and Mike Hettich, Research Center for Non Destructive Testing GmbH, Linz, Austria; Istvan Veres, Qorvo Inc., Apopka, FL, USA

10:50 AM (008)

Nano Ultrasonic Measurements of Nano Particles Matt Clark, Rafael Fuentes, Richard Smith, Fernando Perez-Cota, Shakila Nazin, Leonel Marques, Optics & Photonics, Faculty of Engineering, Univeristy of Nottingham, Nottingham, UK

11:10 AM (287)

Effect of Wire Length in Meander-line-coils on Crack Detection using Surface Wave EMATs Peng Deng, Cunfu He, Yan Lyu, and Bin Wu, College of Mechanical Engineering & Applied Electronics Technology, Beijing University of Technology, Beijing, China

11:30 AM (114)

Expected Phase Suppression for Anomaly Detection in Synchronous Magnetic Imaging NDI David Gray, Sam Zerwekh, and Melissa Natwick, Prime Photonics, Blacksburg, VA

11:50 AM (320)

A Review of Air Coupled Ultrasonics for NDT of Composite Wind Turbine Blades Sunil Chakrapani, Michigan State University, East Lansing, MI

12:10 PM Lunch

-20-


Radiography (Session V) Norbert Meyendorf and Edward Jiminez, Co-Chairpersons

Jost Foundation Room

8:30 AM (275) Progress on Building a Laboratory Based X-ray Phase Contrast Imaging Computed Tomography System Kyle Thompson, Amber Dagel, and Ryan Goodner, Sandia National Lab., Albuquerque, NM

8:50 AM (098)

X-ray Transmission Through Microstructured Optical Fiber RA WIncheski, SL DeHaven, and ER Burke, NASA Langley Research Center, Hampton, VA

9:10 AM (237)

A Supervised Learning Approach for Prediction of X-ray Computed Tomography Data from Ultrasonic Testing Data Daniel Sparkman1, Sarah Wallentine1, Mark Flores1, John Wertz1, John Welter1, Mike Uchic1, Norm Schehl2, Josiah Dierken2, David Zainey2, John Aldrin3, 1Air Force Research Lab., Wright-Patterson AFC, OH; 2University of Dayton Research Institute, Dayton, OH; 3Computational Tools, Gurnee, IL

9:30 AM (002)

Correction of Reconstruction Artifacts Induced by Deflection of Linear-Detectors Fanyong Meng, Zhongchuan Li, and Min Yang, State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing, China

9:50 AM (021)

Realistic Film Grain Noise Simulation in Industrial Radiography Based on Microscopic and Spectral Investigations Sebastian Eckel1, Peter Huthwaite1, and Andreas Schumm2, 1Dept. of Mechanical Engineering, Imperial College London, London, UK; 2EDF SA, R&D Dept., Paris, France

10:10 AM Break 10:30 AM (300)

A Framework for 3D X-ray CT Iterative Reconstruction using GPU-Accelerated Ray Zhan Zhang1,3, Sambit Ghadai1, Onur Bingol1, Leonard Bond1,2,3, Adarsh Krishnamurthy1, 1Dept. of Mechanical Engineering, Iowa State University, Ames, IA; 2Dept. of Aerospace Engineering, Iowa State University, Ames, IA; 3Center for NDE, Iowa State University, Ames, IA

10:50 AM (299)

Paper Watermark Imaging using Electron and Low Energy X-ray Radiography Zhan Zhang1,5, Uwe Ewert2, Timothy Barrett3, Leonard Bond1,4,5, 1Center for NDE, Iowa State University, Ames, IA; 2BAM Bundesanstalt fut Materialforschung und –prufung, Berlin, Germany; 3Center for the Book, University of Iowa, Iowa City, IA; 4Dept. of Aerospace Engineering, Iowa State University, Ames, IA; 5Dept. of Mechanical Engineering, Iowa State University, Ames, IA

12:10 PM Lunch

-21-

Wednesday, July 18, 2018 Civil Infrastructure (Session I)

Chairperson TBD Sugar Maple

1:30 PM (041) Acoustoelactic Evaluation of Ultra-High Performance Concretes Benjamin Ankay, and Chuanzeng Zhang, Dept. of Civil Engineering, Univeristy if Siegen, Siegen, Germany

1:50 PM (209) Performance Comparison of Analytical Reverse Time Migration and Synthetic Aperture

Focusing Technique in Nondestructive Evaluation of Concrete Structures Lev Khazanovich2, and Aziz Asadollahi1, 1Dept. of Civil, Environmental & Geo- Engineering, University of Minnesota, Minneapolis, MN; 2Dept. of Civil & Environmental Engineering, University of Pittsburgh, Pittsburgh, PA

2:10 PM (025) A Novel use of Frequency-banded Synthetic Aperture Focusing Technique for

Reconstructions of Alkali-Silica Reaction in Thick-Reinforced Concrete Structures N. Dianne Bull Ezell1, Austin Albright1, Hector Santos-Villalobos1, Dwight Clayton1, Lev Khazanovich2, 1Oak Ridge National Lab., Oak Ridge, TN; 2University of Pittsburgh, Pittsburgh, PA

2:30 PM (108) Finite Element Modeling of Elastic Wave Generated by Crack Growth

Li Ai, and Paul Ziehl, Dept. of Civil & Environmental Engineering, University of South Carolina, Columbia, SC

2:50 PM (004) An Interpretation of Acoustic Nonlinearity of ASR-Affected Cement-Based Materials

M. Rashidi1, JY Kim2, LJ Jacobs1,2, KE Kurtis1, 1Georgia Institute of Technology, School of Civil & Environmental Engineering, Atlanta, GA; 2Georgia Institute of Technology, GW Woodruff School of Mechanical Engineering, Atlanta, GA

3:10 PM Break 3:30 PM (207) Wave Mixing Technique for Nondestructive Assessment of Alkali-Silica Reaction Dmage in

Concrete Prism Samples Taeho Ju1, Jan Achenbach2, Laurence Jacobs3, and Jianmin Qu1, 1Dept. of Mechanical Engineering, Tufts University, Medford, MA; 2Dept. of Mechanical Engineering, Northwestern University, Evanston, IL; 3College of Engineering, Georgia Institute of Technology, Atlanta, GA

3:50 PM (255) Design of Signal Processing Filter Specialized for Imaging Water-filled Cavities in Concrete

Keigo Suzuki1, Takahiro Goto1, and Takya Tsunoda2, 1Dept. of Architecture & Civil Engineering, University of Fukui, Fukui-ken, Japan; 2NIPPON PS Co. Ltd., Fukui-ken, Japan

4:10 PM (117) Research on the Boundary Reflection Characteristics of Complex Defects in Pipeline

Chen Qin, Xiaojuan Wang, and Jun Liu, School of Mechanical & Precision Instument Engineering, Xi’an University of Technology, Xi’an, China

4:30 PM (068) Microwave Inspection of Wood Bridge Beams and Paved Decks

MT Ghasr1, R Zoughi1, J Wacker2, C Senalik2, and X Wang2, 1Applied Microwave Nondestructive Testing Lab, Electrica & Computer Engineering Dept., Missouri University of Science & Technology, Rolla, MO; 2USDA Forest Service, Forest Products Lab, Madison, WI

4:50 PM (151) Model Uncertainty quantification and assessment for probability of detection (POD)

Jie Chen1, Xuefei Guan1, Jingjing He2, 1Dept. of Mechanical & Machinery, Grad School, Chinese Academy of Engineering Physics, Beijing, China; 2School of Reliability & Systems Engineering, Beihang University, Beijing, China

5:10 PM (150) Uncertainty Sensitivity Analysis of damage toelerance evaluation with ultrasonic data

Xuefei Guan1, Jingjing He2, 1Dept. of Mechanical & Machinery, Grad School, Chinese Academy of Engineering Physics, Beijing, China; 2School of Reliability & Systems Engineering, Beihang University, Beijing, China

-22-


NDE Modeling for Composites (Session II) Cara Leckey and Michael Lowe, Co-Chairpersons

Silver Maple

1:30 PM (135) Modeling of guided wave propagation in multilayer, anisotropic and viscoelastic media for the inspection of composite structures Sreedhar Puliyakote, and Michel Castaings, University Borfeaux, CNRS, Bordeaux INP, Arts et Metiers Paris Tech, Talence, France

1:50 PM (051)

Finite difference simulation of ultrasonic waves for complex composite laminates Erik Frankforter1, Cara Leckey2, 1National Institute of Aerospace, Hampton, VA; 2NASA Langley Research Center, Hampton, VA

2:10 PM (272)

Automated processing for structural analysis of layered composite structures with defects Adarsh Krishnamurthy, Onur Bingol, Nathan Schierer, Robert Grandin, Stephen Holland, Iowa State University, Ames, IA

2:30 PM (274)

Ray tracing and FMC simulation in curved composite structures Callum Lanherne, Paul Wilcox, University of Bristol, Bristol, UK

2:50 PM (147) Smart numerical tools for fast and easy modelling of the ultrasonic testing on curved composite structures Edouard Demaldent, Alexandre Imperiale, Nicolas Leymarie, Sylvain Chatillon, and Pierre Calmon, CEA LIST, Gif-ssur-Yvette, France

3:10 PM Break 3:30 PM (155)

3-Dimentionl forward ultrasonic models for aerospace applications James Blackshire, Air Force Research Lab, Wright-Patterson AFB, OH

3:50 PM (079)

Simulation of thermal signatures of damage measured during quasi-static loading of a single stringer panel William Winfree, Joseph Zalameda, and Michael Horne, NASA Langley Research Center, Hampton, VA

Metallic Microstructure Cara Leckey

4:10 PM (235)

Parametric optimization of the measurement system for grain sizing based on normal incidence diffuse ultrasonic backscatter Luz D. Sotelo, and Joseph Turner, Mechanical & Materials Engineering, University of Nebraska-Lincoln, Lincoln, NE

4:30 PM (139) An inversion methodology for ultrasonic characterization of titanium alloys with microstructures Gaofeng Sha, Jia Li, and Stanislav Rokhlin, Dept. of Materials Science & Engineering, Ohio State University, Columbus, OH

4:50 PM (153) Austenitic weld stiffness map inversion powered by GPU-accelerated finite element simulations Michal Kalkowski, Peter Huthwaite, and Michael Lowe, Dept. of Mechanical Engineering, Imperial College London, London, UK

-23-


NDE for Industry 4.0 (Session III) Norbert Meyendorf Frank Livak Room

1:30 PM (022) Why industry 4.0 and additive manufacturing requires new approaches in NDE Christian Wunderlich, and Jorg Opitz, Fraunhofer IKTS, Dresden, Germany

2:10 PM (313)

Overview of different on- and offline-NDE methods in additive manufacturing of aircraft engine parts Johanna Farnhammer, Joachim Bamberg, Anian Gogelein, Benjamin Henkel, Alexander Ladewig, MTU Aero Engines AG, Munich, Germany

2:50 PM (224)

Intelligence augmentation approach to interfacing artificial intelligence algorithms and software with nondestructive evaluation inspectors for optimal performance John Aldrin1, Eric Lindgren2, David Forsyth3, 1Computational Tools, Gurnee, IL; 2Air Force Research Laboratory, Wright-Patterson AFB, OH; 3TRI/Austin, Austin, TX

3:10 PM Break 3:30 PM (190)

On the tasks of NDE in the face of digitization Martin Spies, Fraunhofer-Institute for Nondestructive Testing IZFP, Saarbruecken, Germany

4:10 PM (184)

Adapting robot paths for automated NDT of complex structures using ultrasonic alignment Jonathan Riise1, Stephen Pierce1, Pascual Nicholson2, Ian Cooper2, 1Centre for Ultrasonic Engineering, Dept. of Electrical & Electronic Engineering, University of Strathclyde, Glasgow, UK; 2TWI Technology Centre, Port Talbot, UK

4:30 PM (233)

Experimental method to compare ultrasonic NDT devices Norbert Meyendorf, Saveri Pal, Leonard Bond, Center for NDE, Iowa State University, Ames, IA

-24-


Digital Twin and Signal Processing (Session IV) Steve Holland

Mildred Livak Room

1:30 PM (033) Digitizing the MRB process for composite aerospace structures Carl Magnuson, and David Forsyth, TRI/Austin, Austin, TX

1:50 PM (062)

Motivation, challengesm and approaches for digital NDE data capture Eric Lindgren, and Sean Coghlan, Materials State Awareness Branch, Air Force Research Lab, Wright-Patterson AFB, OH

2:10 PM (253)

Automated workflow for checklist driven experiment logging in the NDE laboratory Nathan Scheirer, Stephen Holland, Tyler Lesthaeghe, Center for NDE, Iowa State University, Ames, IA

2:30 PM (118)

Increasing defect mapping accuracy for robotic pipe inspection Alexander McGregor1,2, Gordon Dobie1, Charles MacLeod1, Neil Pearson2, 1CUE, University of Strathclyde, Glasgow, UK; 2Eddyfi Technologies, Swansea, UK

2:50 PM (137)

Mobile efficient modified linear delta robotic non-destructive examination platform Anthony Crawford, and James Smith, Idaho National Lab., Idaho Falls, ID

3:10 PM Break 3:30 PM (023)

Projection of 2D data registration in 3D CAD space for rapid automated NDE Andrew Simms, Carl Magnuson, and David Forsyth, NDE Division, TRI/Austin, Austin, TX

3:50 PM (279)

Improving the accuracy of spatial registration of NDE data with deep learning Rafael Radkowski, and Steve Holland, Center for NDE, Iowa State University, Ames, IA

4:10 PM (269)

Real-time waveform tomography of damage precursors in complex composites Fatemeh Pourahmadian, Dept. Civil, Env. & Architectural Engineering, University of Colorado Boulder, CO

4:30 PM (074)

A method for characterizing defects in multi-layer conductive structures by combining pulsed eddy current signals with PCA components Tianyu Ding, Zhaohe Yang, Dibo Hou, Pingjie Huang, Jie Yu, Guangxin Zhang, College of Control Science & Engineering, Zhejiang University, Hangzhou, Zhejiang, China

4:50 PM (091)

Application of signals processing and machine learning techniques for segmentation and spatial registration of material property data Josiah Dierken2, Daniel Sparkman1, Sean Donegan1, Sarah Wallentine1, John Wertz1, David Zainey2, 1AFRL/RXCA, Wright-Patterson AFB, OH; 2University of Dayton Research Institute, Dayton, OH

-25-

Thursday, July 19, 2018

Ultrasonic Phased Arrays I (Session I) Bob Addison and Paul Wilcox, Co-Chairpersons

Silver Maple

8:30 AM (146) Enhanced phaed array imaging through reverberating interfaces M. Ingram, J. Dziewierz, A Gachagan, A Nordon, A Mulholland, and M Hegarty2, University of Strathclyde, Glasgow, UK; 2BP Chemicals, Hull, UK

8:50 AM (132)

Multi-aperture beamforming for automated large structure inspection using ultrasonic phased arrays Riliang Su, Carmelo Mineo, Charles MacLeon, Stephen Pierce, Anthony Gachagan, CUE, Dept. of Electronic & Electrical Engineering, University of Strathclyde, Glasgow, UK

9:10 AM (111)

A sparse-TFM imaging method based on sparse array optimization and new edge-directed interpolation Hongwei Hu, Jian Du, Chengbao Ye, Xianghong ianzan, Xiongbing Li2, Changsha University of Science & Technology, Changsha, China, 2Central South University, Changsha, China

9:30 AM (089)

Weighted data fusion of multi-view ultrasound array measurements for reliable weld inspection Artem Kashubin, Peter Cawley, Nicolas Budyn2, Rhodri Bevan2, Paul Wilcox2, Anthony Croxford2, Jie Zhang2, Imperial College London, UK; 2University of Bristol, UK

9:50 AM (083)

Characterization of speckle noise in linear ultrasonic imaging Rhodri Bevan, Jie Zhang, Nicolas Budyn, Anthony Croxford, Paul Wilcox, University of Bristol, UK

10:10 AM Break 10:30 AM (050)

Laser induced ultrasonic phased array inspection of complex-shaped component with adaptive total focusing method Jing Xiao, Jian Chen2, Zheng Fan2, School of Electrical & Electronic Engineering, Nanyang Tech University, Singapore, 2School of Mechanical & Aerospace Engineering, Nanyang Tech University, Singapore

10:50 AM (048)

Super resolution array imaging for the inspection of embedded rough 2D and 3D defects Joshua Elliott, Michael Lowe, Peter Huthwaite, and David Duxbury2, Imperial College London, UK; 2Rolls-Royce Nuclear, Derby, UK

11:10 AM (043)

Characterization of EDM notch and fatigue frack using ultrasonic arrays Chaoyong Peng, Jianping Peng, School of Physical Science & Tech., Southwest Jiaotong University, China

11:30 AM (148)

Calibration of ultrasonic hardware for enhanced TFM performance M. Ingram, J. Dziewierz, A Gachagan, A Nordon, A Mulholland, and M Hegarty2, University of Strathclyde, Glasgow, UK; 2BP Chemicals, Hull, UK

11:50 AM (162)

High speed hollow axle inspection with a new designed cone type phased array Thomas Heckel, Rainer Boehm, Daniel Brackrock, Wolfgang Spruch2, Toni Beggerow2, Bundesanstalt fur Materialforschung und-prufung, Berlin, Germany; 2BTD, Brandenburg, Germany

12:10 PM Lunch

-26-

Thursday, July 19, 2018 Nonlinear Ultrasonics (Session II)

Peter Nagy and Katie Matlack , Co-Chairpersons Sugar Maple

8:30 AM (003) Acoustic nonlinearity parameter due to microctructural defects Xiang Gao, and Jianmin Qu, Dept. of Mechanical Engineering, Tufts University, Medford, MA

8:50 AM (192)

Theoretical and experimental results on Rayleigh-wave harmonic generation in materials with depth-dependent non-linear properties Martin Spies, Pierric Mora, and Hans Rieder, Fraunhofer-Institute for Nondestructive Testing, Saarbruecken, Germany

9:10 AM (205)

Nonlinear ultrasound for nondestructive evaluation of adhesive joints Paul Zabbal1,2, Guillemette Ribay1, Julien Jumel2, 1CEA LIST, Gif-sur-Yvette, France; 2University Bordeaux, CNRS, Talence, France

9:30 AM (088)

Investigation on nonlinear ultrasonic lamb waves at low frequency Peng Zuo, Zheng Fan, and Yu Zhou2, School of Mechanical & Aerospace, Nanyang Tech, Univ., Singapore; 2ARTC, Singapore

9:50 AM (013)

Group velocity relationship in collinear mixing of nonlinear lamb waves Peng Zhang, and Jianmin Qu, Dept. Mechanical Engineering, Tufts University, Medford, MA

10:10 AM Break 10:30 AM (206)

Mutual interactions of guided waves in plate: finite element studies Mostafa Hasanian, Cliff Lissenden, and Shengbo Shan2, Penn State University, PA; 2The Hong Kong Polytechnic University

10:50 AM (052)

Acoustoelasticity of additively manufactured stainless steel Ju Shuai, Haifeng Zhang, and Christopher Kube2, Dept. of Mechanical & Engergy Engineering, University of North Texas, Denton, TX; 2Bennett Aerospace Inc., Cary, NC

11:10 AM (260)

Experimental investigation of the quantitative relationship between nonlinear ultrasonic responses and microstructure features of fatigue crack Jiang Jin, Parisa Shokouhi, Pennsylvania State University, State College, PA

11:30 AM (110)

Nonlinear resonant ultrasound spectroscopy for nondestructive evaluation of thermally aged small pressed pellets Carly Donahue, Peter Schulze, David Moore, Los Alamos National Lab., Los Alamos, NM

11:50 AM (055)

Evaluation of bolt torque levels using nonlinear wave modulation spectroscopy Carter Neblett, Manton Guers, and Dean Capone, Pennsylvania State University, State College, PA

12:10 PM Lunch

-27-


Structural Health Monitoring I (Session III) Olivier Mesnil

Frank Livak Room

8:30 AM (061) AFRL perspective on structural health monitoring Eric Lindgren, NDE Tech. Lead, Material State Awareness Branch, Air Force Research Lab., Wright-Patterson AFB, OH

8:50 AM (248)

Dynamics-based testing to localize macro cracking due to alkali-silica reaction in concrete Sarah Miele, Pranav Karve, Sankaran Mahadevan, Vanderbilt University, Nashville, TN

9:10 AM (028)

Evaluating the use of the failure forecast method for improved fatigue remnant life predictions Michael Leung, Joseph Corcoran, Peter Cawley, Michael Todd2, Imperial College London, London, UK; 2Jacobs School of Engineering, University of California San Diego, CA

9:30 AM (039)

Optimal permanently installed ultrasonic monitoring system for polycrystalline materials Yuan Liu, Anton Van Pamel, Peter Cawley, and Peter Nagy2, Imperial College London, London, UK; 2University of Cincinnati, Cinncinnati, OH

9:50 AM (204)

High-resolution defect imaging in laminate composites and honeycomb structures using sparse piezo-electric transducers network for guided waves excitation and sensing Andrii Kulakovskyi1,2, Olivier Mesnil2, Bastien Chapuis2, Oscar d’Almeida1, Rafik Hadjria1, TCA, SAFRAN Tech., Magny-les-Hameaux, France; 2LMC, DISC, CEA LIST, Gif-sur-Yvette, France

10:10 AM Break 10:30 AM (080)

Novel temperature compensation method for guided waves based SHM of pipes Stefano Mariani, Sebastian Heinlein, Peter Cawley, Imperial College London, London, UK

10:50 AM (133) Simulation assisted guided wave structural health monitoring of aerospace structures Cara Leckey, Elizabeth Gregory, William Schneck III, and Paul Swindell, NASA Langley Research Center, Hampton, VA

11:10 AM (172)

Topological Imaging of tubular structures using ultrasonic guided waves Aditya Krishna, Marc Deschamps, Eric Ducasse, Samuel Rodriguez, Institute of Mechanics & Mechanical Engineering, Bordeaux, France

11:30 AM (188)

Validation of spectral finite element simulation tools dedicated to guided wave based structure health monitoring Olivier Mesnil, Alexandre Imperiale, Edouard Demaldent, Bastien Chapuis, NDE Department CEA LIST, Saclay, France

11:50 AM (113)

Feasibility of structural health monitoring in a composite plate using omnidirectional SH0 transduction Baptiste Gauthier, Nicolas Tremblay, Pierre Belanger, Dept. Mechanical Engineering, Ecole de Technologie Superieure, Montreal, Canada

12:10 PM Lunch

-28-

Thursday, July 19, 2018 Electromagnetic Measurements (Session IV)

Chairperson TBD Mildred Livak Room

8:30 AM (232)

Friction stir weld inspection using the motion induced eddy current testing technique Harmut Brauer, Jam Otterbach, Marek Ziolkowski, Hannes Toepfer, Michael Graetzel, Jean Bergmann, Technische Universitat Ilmenau, Ilmenau, Germany

8:50 AM (242)

Effect of metal proximity on remote electromagnetic detection of molten metal level in pyrometallurgical furnaces Thomas Krause, Aroba Saleem, P Ross Underhill, David Chataway2, Terry Gerritsen2, Afshin Sadri2, Royal Military College of Canada, Kingston, ON, Canada; 2Hatch, Mississauga, ON, Canada

9:10 AM (168)

Eddy current inspection system for fatigue crack detection in welded joints of clad pipelines Cesar Camerini, Joao Rebello, Lucas Campos, Gabriela Pereira, Rafael Santos2, Joao Santos2, Tomasz Chady3, Federal University of Rio de Janeiro, Brazil; 2PETROBRAS R&D, Rio de Janeiro, Brazil; 3West Pomeranian University of Tech., Szczecin, Poland

9:30 AM (298)

An approach to current leaking cracks in eddy current NDE modeling Norio Nakagawa, Center for NDE, Iowa State University, Ames, IA

9:50 AM (154)

Efficient calculation of eddy current crack response around conducting fasteners Anastassios Skarlatos, and Christophe Reboud, CEA LIST CEA, Saclay, France

10:10 AM Break 10:30 AM (228)

Progress on distinguishing cracks and non-metallic inclusions using eddy current nondestructive evaluation and model-based inversion John Aldrin1, Eric Shell2, Erin Oneida2, Harold Sabbagh3, Elias Sabbagh3, R Kim Murphy3, Alisha Hutson4, Siamack Mazdiyasni5, Matt Cherry5,

10:50 AM (195)

Characterization of microtexture regions in titanium alloys using eddy current probes Matthew Cherry, Daniel Sparkman, Adam Pilchak, Laura Homa2, Air Force Research Lab., Wright-Patterson AFB, OH; 2University of Dayton Research Institute, Dayton, OH

11:10 AM (037)

The influence of static and dynamic magnetoelastic effects on low-frequency potential drop measurements Joseph Corcoran, Michael Leung, Peter Nagy, Imperial College London, London, UK; University of Cincinnatti, OH

11:30 AM (315)

Design optimization of experiments and finite element models for eddy current probe characterization Alexander Brown, Amanda Criner, Mathew Cherry, Air Force Research Lab., Wright-Patterson AFB, OH

11:50 AM (038)

Study on the magnetic nonlinear mixing frequency technique and its application in mechanical properties assessment Yu Chang, Jingpin Jiao, Cunfu He, and Bin Wu, College of Mechanical Engineering & Applied Elec. Tech., Beijing University of Tech., Beijing, China

12:10 PM Lunch

-29-


Ultrasonic Phased Arrays II (Session I) Bob Addison and Paul Wilcox, Co-Chairpersons

Silver Maple

1:30 PM (201) Adaptive array processing for enhanced ultrasonic non-destructive evaluation and imaging Minghui Li, and Gordon Hayward2, University of Glasgow, Glasgow, UK; 2Alba Ultrasound, Glasgow, UK

1:50 PM (212)

2D phased arrays for improved defect detection and characterization in 3D geometries Jessica McKee, Rob Malkin, Paul Wilcox, Dept. of mechanical Engineering, University or Bristol, Bristol, UK

2:10 PM (238)

Ultrasonic inspection of complex parts with TRL matrices probes mounted on water wedges using an adaptive plane wave imaging approach for combined pulse-echo and pitch-catch modes Ewen Carcreff, Nans Laroche, Dominique Braconnier, The Phased Array Company, Cincinnatti, OH

2:30 PM (267)

Simulation and processing tools for the design and performance evaluation of FMC-TFM techniques S. LeBerre, X Artusi, R Miorelli, E Iakovleva, P Calmon, CEA LISA SISC Gif-sur-Yvette, Framce

2:50 PM (296) Ultrafast phased array imaging: an application to closed crack characterization Sinan Li, Yoshikazu Ohara, Sylvain Haupert, Verasonics Inc, USA; Tohoku University, Japan; UPMC, France

3:10 PM Break 3:30 PM (076)

Multiple cancelation through coded transmission Arno Volker, TNO

3:50 PM (197)

Si phased array the future in modern ultrasonic rail inspection? Thomas Heckel, Bundesanstalt fur Materialforschung ung- prufung, Berlin, Germany

4:10 PM (047)

Flexible wege phased array transducers, recent development and innovation P. Dumas, S Oster, A Membre, L Fournier, Imasonic, France

4:30 PM (131)

A comparison of the performance of imaging strategies for the total focus method beamformer Raymond ten Grotenhuis, Andrew Hong, Andrew Chen2, Ontario Power Generation Inc., Pickering, ON, Canada; 2Kinectrics Inc., Toronto, ON, Canada

4:50 PM (124)

Evaluating the grain size and orientation of austentic steel using ultrasonic phased array with through-transmission technique Chenxin Zhang, Jun Han, Yang Yang, Chinese Academy of Sciences, Quanshou, China

-30-


Material Characterization (Session II) Pete Collins Sugar Maple

1:30 PM (266)

Investigation of white etching cracks in roller bearings by scanning acoustic microscopy Bernd Kohler, and Martin Barth, Fraunhofer IKTS, Dresden, Germany

1:50 PM (009)

Nondestructive acoustic imaging of living cells Matt Clark, Fernando Perez-Cota, Richard Smith, Emilia Moradi, Leonel Marques, Kevin Webb, University of Nottingham, Nottingham, UK

2:10 PM (116)

Investigation of the acoustic nonlinear parameter using higher harmonic getneration Shuzeng Zhang, Xiongbing Li, Hyunjo Jeong2, Sungjong Cho2, School of Traffic & Transportation Engineering, Central South University, Hunan, China; 2Dept. Mechanical Engineering, Wonkwant University, Iksan, South Korea

2:30 PM (310)

Estimating fatigue crack harmonic generation using contact acoustic nonlinear theory with a distributed interface stiffness Brian Reinhardt, Atsushi Baba, Bernhard Tittmann, Pennsylvania State University, State College, PA; Hitachi, Ltd.

2:50 PM (297) Stress estimation in weak anisotropic material by using acoustoelastic effect of Rayleigh waves Young-Dae Shim, Jihyun Jun, and Kyung, Young Jhang, Hanyang University, Seoul, South Korea

3:10 PM Break 3:30 PM (302)

Estimation of system nonlinearity in measurement of ultrasonic nonlinearity parameter Dong-Gi Song, Jongbeom Kim, Kyung-Young Jhang, Hanyang University, Seoul, South Korea

3:50 PM (104)

Pulse-echo nonlinearity measurement of solid samples using a dual element transducer Hyunjo Jeong, and Sungjong Cho, Wonkwang University, South Korea; Shuzeng Zhang and Ziongbing Li, Central South University, China

4:10 PM (303)

Estimation of acoustic nonlinearity parameter in Al6061-T6 using acoustoelastic effect Chang-Soo Kim, Jongbeom Kim, Dong-Gi Song, Kyung-Young Jhang, Hanyang University, Seoul, South Korea

4:30 PM (268)

Data-driven temperature compensation on lamb waves Ahmad Zoubi, and V John Mathews, Oregon State University, OR

4:50 PM (316)

Simultaneous reconstruction of velocity and density using acoustic multi-parameter full waveform inversion Jing Rao, Zheng Fan, and Madis Ratassepp, Nanyang Technological University, Singapore; Tallinn University of Technology, Estonia

-31-


Ultrasound Scattering (Session III) TBD

Mildred Livak Room

1:30 PM (109) Elastic Wave Scattering by a new computationally advantaged formalism Paul Schafbuch, Dept. of Mechanical Engineering, Center for NDE, Iowa State University, Ames, IA

1:50 PM (040)

Expected scattering of incident shear waves from 2D random rough surfaces using stochastic Kirchhoff theory Stewart Haslinger, Michael Lowe, Fan Shi, Peter Huthwaite, Richard Craster, Imperial College London, London, UK

2:10 PM (045)

Assessment of systematic and random errors of time of flight diffraction defect sizing John Jian, Alan Stansfield, Darren Chapman, EDF Enery, Gloucester, UK

2:30 PM 096)

Ultrasonic beam model of leaky Rayleigh wave generated by focused immersion transducer Shan Li, Yongfeng Song, Shuzeng Zhang, Xiling Liu, Xiongbing Li, Central South University, Changsha, China

2:50 PM (120) Research on detection and imaging method for corrosion defects of plate structures Li Li, Jingpin Jiao, Hongtao Lv, Cunfu He, Bin Wu, Beijing University of Technology, Beijing, China

3:10 PM Break 3:30 PM (127)

Interaction between SH0 guided waves and tilted surface-breaking cracks in steel plates Jerome Combaniere, Peter Cawley, Kevin McAughey, Baker Hughes, Cramlington, UK; Imperial College London, London, UK

3:50 PM (129)

Optimized manycore ultrasonic simulation code with sequential monte-carlo based parameter estimation William Schneck, Elizabeth Gregory, Cara Leckey, Heather Reed, NASA Langley Research Center, Hampton, VA; Thorton Tomasetti, New York City, NY

4:10 PM (164)

The dispersion curves and wave structures of lamb waves in functionally graded plate: Theoretical and simulation analysis Jianbo Zhang, Yan Lyu, Guorong Song, Mingkun Lium Bin Wu, Cunfu He, Beijing University of Technology, Beijing, China

4:30 PM (056)

Observation of ultrasonic wave propagation in centrigugally cast stainless steel Shan Lin, Central Research Institute of Electric Power Industry, Japan

4:50 PM (029)

A comparative study on the accuracy of elastic micromechanical homogenization methods in textured polycrystals Bo Lan, Ming Huang, Michael Lowe, Christopher Kube, Michael Carpenter, Chi-Sing Man, Imperial College London, London UK; University of Cambridge, UK; University of Kentucky, USA

-32-


Electromagnetic Measurements (Session IV) Peter Nagy

Frank Livak Room

1:30 PM (140) A novel hall-based probe for measuring mechanical properties of structural steels Yan Huang, Cunfu He, XuiCheng Liu, and Cin Wu, College of Mechanical Engineering Applied Electronics Technology, Beijing University of Technology, Beijing, China

1:50 PM (213) Correlation between signals of eddy current obtained with EDM notch and fatigue cracks VMA Silva, C, Camerini, L Braga, JM Del Castilho, R Santos, JM Rebello, G Pereira, Lab of Nondestructive Testing, Federal Univeristy of Rio de Janeiro, Brazil; Pertobras Research and Development Center, Rio de Janeiro, Brazil

2:10 PM (241) Microstructural and magnetic Barkhausen noise characterization of temper embrittled HY-80 steel Thomas Krause1, P Ross Underhill1, Nancy Herve2, Shannon Farrell2, Aroba Saleem1, 1Dept. of Physics and Space Science, Roayl Military College of Canada, Kinston, ON; 2Defence Research and Development Canada, Atlantic Research Centre, Dartmouth, NS

2:30 PM (042) High Frequency nondestructive Hall coefficient measurements using inductive sensing for characterizing shot-peened IN718 Dheeraj Velicheti1, Peter Nagy1, Waled Hassan2, 1Dept. of Aerospace Engineering and Engineering Mechanics, University of Cincinnati, OH; 2Rolls-Royce Corporation, Indianapollis, IN

2:50 PM (034) Suface-breaking flaw detection in Ferritic welds using quantum well hall effect sensor devices James Watson, Chen-Wei Liang, Firew Biruu, Mohamded Missous, School of Electric and Electronic Engineering, University of Manchester, Manchester, UK

3:10 PM Break

Structural Health Monitoring II (Session V) Olivier Mesnil

Frank Livak Room 3:30 PM (219)

Damage identification based on acceleration and strain sensing skin data fusion Alessandro Cancelli1, Austin Downey1, Simon Laflamme1,2,, Alice Alipour1, Sri Sritharan1, Filippo Ubertini3, Jian Li4, 1Dept. of Civil Engineering, Iowa State University, Ames, IA; 2Electical & Computer Engineering, Iowa State University, Ames, IA; 3Dept. Civil Engineering; University of Perugia, Italy; 4Dept. Civil Engineering, University of Kansas, Lawrence, KS

3:50 PM (259) Fatigue crack monitoring using carbon nanotube-based sensors Shafique Ahmed1,5, Thomas Schumacher2, Erik Thostenson1, Jennifer McConnell1, 1University of Delaware; 2Portland State University

4:10 PM (277) Sequential Monte Carlo based parameter estimation for structural health monitoring Heather Reed1, Thornton Tomasetti1, William Schneck2, Elizabeth Gregory2, Cara Leckey2, 1New York City, NY; 2NASA Langley Research Center, Hampton, VA

4:30 PM (306) Experimental model of impact damage for guided wave-based inpection of composites Mohammad Sherafat1, Nicolas Quaegebeur2, Pascal Hubert1, Larry Lessard1, Patrice Masson2, 1Dept. of Mech. Engineering, McGill Univeristy, Montreal, Quebec, Canada; 2GAUS, Universita de Sherbrooke, Sherbrooke, Canada

4:50 PM (271) Corrosion state of rockbolts assessed with energy of back echo and trailing wall echo Patrice Rivard, Ishak Medfouni, Serge Kodjo, Dept. of Civil Engineering, Universite de Sherbrooke, Canada

-33-

Professional Posters

(007) Thickness Measurement of polymer thin films with high frequency ultrasonic transducers ---Matt Clark, Richard Smith, Fernando Perez-Cota, Leonel Marques; University of Nottingham, UK (012) Research on high precision measurement of small diameter pipe diameter with high speed

---Zhang Yicheng, Nie Yong, Cai Jiafan; China Nuclear Power Operation Corp., Wuhan, China (015) Research on automatic ultrasonic identification of leaking fuel rod

---Gan Wen-jun, Zhu Xing-li, Cai Jia-fan; China Nuclear Power Operation Technology Corp., Wuhan, China (036) Quasi-DC potential drop measurements for materials testing

---Joseph Corcoran1, Peter Nagy1,2, 1Imperial College London, UK; 2University of Cincinnati, OH (054) EA low power miniaturized ultrasound system using spread spectrum technology

---Paul Gammell, Gammell Applied Technologies, Exmore, VA (066) Study of steel pipeline welded joints with artificial aging using thermoelectric power measurements

---Sergio Ramirez, Hector Carreon, Alberto Ruiz; Edif. “U” Cuidad Universitaria, Morelia, Mich., Mexico (067) Microwave holographical imaging of glass fiber reinforced polymer (GFRP) reinforcing bars in

concrete ---MT Ghasr, K Ying, Z Al-Jaberi, H Alghazali, JJ Myers, R Zoughi; Missouri University of Science and

Technology, Rolla, MO (072) Ultrasonic in-line inspection signal processing on long-distance oil pipeline

---Peilu Li, Chunguang Xu, Yunchao Peng, Bang Gan, Xianzan Wang; Beijing Institute of Technology, Beijing, China; Sinopec Pipeline Storage & Transportation, Xuzhou, China

(081) Application of the thermoelectric measurements to track aging effects on Inconel 600 ---Martin Barajas-Alvarez, Lourdes Yareth Herrera-Chavez, Alberto Ruiz, Hector Carreon, Victor Lopez;

Universidad Michoacana d San Nicolas de Hidalgo, Morelia, Mich., Mexico (105) Ultrasonic phase-coherent multiple signal classification imaging for non-destructive evaluation ---Chengguang Fan, Lei Yang, Yong Chen, Yong Zhao, Ziongbing Li2, National University of Defense

Technology, Changsha, China; 2Central South University, Changsha, China (106) Comprehensive diagnosis the fault of on-line bearing

---Yali Shi, Zhen Wang, Yu Zhang2, Xiaorong Gao2; Beijing Lead Time Science & Technology, Chengdu, China; 2Southwest Jiaotong University, Chengdu, China

(107) The application of a bettery-less totional vibration sensor with magnetostrictive patches to a large

rotating ship propulsion shaft --- Hong Min Seung1, Jun Kyu Lee2, Chung Il Park2, Joo Kyung Lee3, Do Hyeong Lim4 and Yoon Young Kim2, 1Korea Research Institute of Standards and Science (KRISS), South Korea; 2Seoul National University, South Korea; 3Korea Institute of Nuclear Safety (KINS), South Korea; 4Hyundai Heavy Industries Co. Ltd., South Korea

(145) Development of a railway inspection unit using phased-array ultrasonic transducers ---Wonjae Choi, Mukyoung Seo, Gunwoo Kim, Ki-bok Kim, Se-gon Kwon2; Center for Safety Measurement,

Yiseong-Gu, South Korea; 2KORAIL Research Institute, Dpng-gu, South Korea (157) Characterization of the linear-acoustic material behavior of fiber-reinforced composites using Lamb

Waves ---Sarah Johannesmann, Manuel Webersen, Julia Duchting, Leander Claes, Bernd Henning; Paderborn

University, Pederborn, Germany (179) Portable & real-time 3D microwave camera ---MT Ghasr, M Dvorsky, R Zoughi; Missouri University of Science and Technology, Rolla, MO (186) Comparative study of residual stresses in API X65 steel by x-ray diffraction and ultrasonic technique ---Joao Rebello2, Maria Cindra Fonesca, Bruna Machado, Maurico Motta3; Federal Fluminesnse University,

Niteroi, Brazil; 2Federal University of Rio de Janeiro, Brazil; 3CEFET/RJ, Rio de Janeiro, Brazil

-34-

(187) Cryoultrasonic NDE ---Francesco Simonetti, University of Cincinnati, Cincinnati, OH (199) Study on quantitative eddy current array detection technology of cracks at free segment in heat

transfer tubes of nuclear power plants ---Pan Qi, Wenbin Shao, Hongyan Cui, Shusheng Liao, Yicheng Zhang; China Nuclear Power Operation

Technology Corp., Wuhan, China (200) Preliminary study on detection technology for L-type cladding weld of spent fuel storage pool ---Pan Qi, Hongyan Cui, Wenbin Shao, Shusheng Liao, Yicheng Zhang, Wei Li2; China Nuclear Power

Operation Technology Corp., Wuhan, China; 2China University of Petroleum, Qingdao, China (222) Design and construction of an absolute precision load gauge: theory and experiment ---Kwang Yul Kim, APLG LLC, Ithaca, NY (256) Spread spectrum time domain reflectometry for detecting and locating electrical faults with arbitrary

impedances ---Samuel Kingston, Evan Beniot, Cynthia Furse, Naveen Jayakumar, Josiah LaCombe, Mashad Saleh,

Michael Scarpulla, Joel Harley2; University of Utah; 2University of Florida (263) Beamforming of ultrasonic guided waves for search of discontinuities using chaotic optimization ---Arturo Baltazar, Karla Fernandez-Ramirez; Robotics & Advanced Manufacturing Program, CINVESTAV-

Unidad Saltillo, Ramos Arizpe, Mexico (265) Supervised deep learning techniques for material classification with spectral computed tomography

datasets ---Srivathsan Koundinyan, April Suknot, Kyle Thompson, Edward Jimenez; Advanced Solutions

Engineering, Sandia National Labs., Albuquerque, NM (281) The development of spinal surgery training model ---Obaidallah Elshafiey, Mohammad Haroon, Muhammad, Mahmoud Moghavvemi; University of Malaya,

Jalan Universiti, Kuala Lumpur, Wilayah Pers (293) In-situ monitoring for metal additive manufacturing using process acoustic signatures ---Hossein Taheri, Lucas Koester, Timothy Bigelow, Leonard Bond; Center for NDE, Iowa State University,

Ames, IA (311) Modeling Ultrasound propagation in curved composite laminates ---Ron Roberts, Center for NDE, Iowa State University, Ames, IA (318) Efficient inspection of concrete bridges using aerial radar imaging on a drone platform ---T. Yu, N. D’Amico, A. Al-Zeyadi, J. Hu, Q. Tang; University of Massachusetts Lowell, Lowell, MA

-35-

Student Poster Competition (024) Application of the thermoelectric effect for monitoring over aging effects on Ti-6Al-4V alloy

---Martin Barajas-Alvarez, Alberto Ruiz, Hector Carreon, Victor Lopez; Universidad Michoacana de San Nicolas de Hidalgo, Morelia, Michoacan, Mexico

(085) Ultrasonic flaw sizing method in practical applications based on ultrasonic measurement model ---Nan Sun, Shuzeng Zhang, Xiongbing Li; Central South University, Changsha, Hunan China

(090) Manipulating curvature of plane wavefront using holey plates ---Sai Aditya Raman Kuchibhatla, Prabhu Rajagopal; Indian Institute of Technology Madras, Chennai, India

(093) Fast MAPOD and sensitivity analysis using stochastic metamodels ---Xiaosong Du, Praveen Gurrala, Leifur Leifsson, Jiming Song, William Meeker, Rob Roberts; Iowa State University, Ames, IA

(125) Laser generation of narrowband lamb waves for in-situ inspection of additively manufactured metal components ---Geo Davis1, Prabhu Rajagopal1, Krishnan Balasubramaniam1, Suresh Palanisamy2,3, Romesh Nagarajah2; 1Indian Institute of Technology Madras, Chennai, India; 2Swinburne University of Technology, Melbourne, Australia; 3Defence materials Technology Centre, Victoria, Australia

(141) Excitation-dependant nonlinear behavior of distributed microcracks ---Kathrin Hoffmann1, Jin-Yeon Kim1, Katherine Scott1, Jianmin Qu2, Laurence Jacobs1; 1Georgia Institute of Technology, Atlanta, GA; 2Tufts University, Medford, MA

(160) Analytical modeling of the evolution of the nonliearity parameter of sensitized stainless steel

---Brian Fuchs1, Jin-Yeon Kim1, Joe Wall2, Jianmin Qu3, Laurence Jacobs1, 1Georgia Institute of Technology, GA; 2Electric Power Research Institute, NC; 3Tufts University, MA

(163) Reflection study of shear horizontal guided wave modes with plates edge at different incident angles ---Nived Suresh, Krishnan Balasubramaniam; Indian Institute of Technology Madras, Chennai, India

(167) Detection of second harmonic guided waves using electromagnetic acoustic transducers ---Kenji Kitamura, Kosuke Kanda, Tohihiko Sugiura; Keio University, Japan

(170) Eddy current system for complex geometry inspection in high speed application ---Cesar Camerini1, Joao Rebello1, Gabriela Pereira1, Rafael Santos2, Tomasz Chady3, 1Federal University of Rio de Janeiro, Brazil; 2PETROBRAS R&D Centre, Rio de Janeiro, Brazil; 3West Pomeranian University of Technology, Szczecin, Poland

(173) Influence of magnetrostrictive strip size in the generation of L(0,2) and T(0,1) wave mode using MPT ---Renjith Puthusseri, Krishnan Balasubramaniam; Indian Institute of Technology Madras, Chennai, India

(198) Nonlinear ultrasonic techniques for the quantification of dislocations and residual stress fields in additive materials ---Aurelio Bellotti1, Jin-Yeon Kim1, Laurence Jacobs1, Joseph Bishop2, Bradley Jared2; 1Georgia Institute of Technology, GA; 2Sandia National Laboratories, Albuquerque, NM

(208) Linear and nonlinear ultrasonic measurements on additively manufactured 316L stainless steel ---Changgong Kim1. Xiaoyuan Lou2, Kathryn Matlack1; 1University of Illinois at Urbana-Champaign, IL; 2Auburn University, AL

(262) Adaptive cross approximation for accelerating BEM in ECNDE ---Yang Bao, Jiming Song; Iowa State University, Ames, IA

(264) Influence of surface roughness of additive manufacturing on laser ultrasonic measurements ---Chaitanya Bakre, Mostafa Hasanian, Cliff Lissenden; Pennsylvania State University, State College, PA

(284) Interfacial adhesion (kissing bond) detection using shear horizontal (SH) waves ---Dileep Koodalil1, David Barnoncel2, Prabhu Rajagopal1, Krishnan Balasubramaniam1, 1Indian Institute of Technology Madras, Chennai, India; 2Arian Group, Saint Medard en Jalles, France

(319) Nonlinear Rayleigh Surface Wave Technique to Characterize Microstructural Damage of Cold Worked Stainless Steel 304 ---Sangyun Park, Jin-Yeon Kim, Laurence J. Jacobs, Georgia Institute of Technology, Atlanta, GA

-36-

Author Listing * Session Charperson(s)

Achenbach, Jan D. 21 Adebisi, Rasheed 16 Addison, Bob 25*, 29* Agarwal, Vivek 18 Ahmed, Shafique 32 Ai, Li 21 Al-Jaberi, Z. 33 Al-Zeyadi, A. 15, 34 Albright, Austin 21 Aldrin, John C. 4, 5, 16, 17, 20, 23, 28 Alguri, K Supreet 12 Ali, S. 14 Alipour, Alice 32 Alqahtani, Hussain 6 Altenburg, Simon J. 8 Ambrozinski, Lukasz 16 Ankay, Benjamin 21 Aramco, Saudi 2 Arenas, Monica P. 9 Arguelles, Andrea 17 Artusi, X. 29 Asadollahi, Aziz 21 Aubrey, Alexandre 18 Baba, Atsushi 30 Bai, Jie 8 Bakre, Chaitanya 35 Balasubramaniam, Krishnan 19, 35 Baltazar, Arturo 34 Bamberg, Joachim 23 Bao, Yang 35 Baque, F. 2 Barajas-Alvarez, Martin R. 33, 35 Barden, T. 12 Barnoncel, David 35 Barrett, Timothy 20 Barth, Martin 30 Bastawros, Ashraf 13 Batista, Caio 14 Beckett, Darren 7 Beggerow, T. 25 Belanger, Pierre 2, 6, 27 Bellotti, Aurelio 35 Beniot, Evan 34 Berer, Thomas 19 Berges, Mario 5 Bergmann, Jean P. 28 Bernegger, Raphael 8 Bescond, Christophe 19 Betts, Scotts 7 Bevan, Rhodri 25 Biedermann, Eric 16, 17 Bielak, Jacobo 5 Bigelow, Timothy 3, 34 Bingol, Onur R. 20, 22 Birt, J. 7 Biruu, Firew 32 Bishop, Joseph E. 35 Blackshire, James 17, 22

Boehm, Rainer 25 Boisvert, Jonathan 3 Bond, Leonard 1*, 3, 15, 20, 23, 34 Boots, A. 7 Bose, Sandip 9 Bowler, Nicola 15, 18 Brackrock, D. 25 Braconnier, Dominique 29 Braga, L. 32 Brassard, Michel 4 Brauer, Hartmut 28 Briggs, Brandi 7 Brown, Alexander 28 Budyn, Nicolas 25 Bui, Tinh Quoc 11 Bunish, Kevin 3 Burdick, Jeffrey 3 Burke, E.R. 20 Burke, J. 18 Butsch, Bryan 3 Calmon, Pierre 22, 29 Camerini, Cesar 28, 32, 35 Cancelli, Alessandro 32 Cao, Xuwei 2 Capone, Dean 26 Carcreff, Ewen 29 Carpenter, Michael 31 Carreon, Hector 33, 35 Castaings, Michel 22 Cawley, Peter 2*,6*, 11*, 25, 27, 31 Cegla, Frederic B. 16 Chaix, J.F. 2 Chakrapani, Sunil 19* Chang, Fu-Kuo 1 Chang, Yu 28 Chapman, Darren 2 Chapuis, Bastien 27 Chataway, David 28 Chen, Andrew 29 Chen, Chao 7 Chen, Jian 25 Chen, Jianlin 11 Chen, Jie 21 Chen, Yong 33 Cherry, Matthew 5, 16, 28 Chillara, Vamshi Krishna 9 Chiou, Thomas (Chien-Ping) 15* Cho, H. 18 Cho, Sungjong 30 Cho, Younho 1, 11 Choi, S. 18 Choi, Wonjae 33 Choquet, Marc 19 Chua, Chien An 2 Claes, Leander 33 Clare, Adam 3 Clark, Matt 1, 3, 19, 30, 33 Clayton, Dwight 21

-37-

Coghlan, Sean 24 Cojocaru, Cristian 19 Cola, Mark 7 Collins, Pete 1*, 7*, 30* Combaniere, Jerome 31 Connell, John 4 Constable, Kevin 9 Cooper, Ian 23 Corcoran, Joseph 27, 28, 33 Corneloup, G. 2 Cramer, K. Elliot 16 Craster, Richard V. 31 Crawford, Anthony 24 Criner, Amanda 5, 28 Croxford, Anthony 18, 25 Cui, Fangsen 6 Cui, Hongyan 34 D’Almeida, Oscar 5, 27 D’Amico, N. 34 D’Angelo, Ralph M. 9 Dagel, Amber 20 Daugherty, Kevin 17 Davis, Geo 35 de Almeida, Luiz H. 9 DeHaven, Stanton 20 Del Castilho, J.M. 32 Demaldent, Edouard 18, 22, 27 Deng, Peng 19 Derode, Arnaud 18 Deschamps, Marc 27 Dierken, Josiah 4, 20, 24 Ding, Lu 8 Ding, Tianyu 24 Dizeu, Frank 3 Dobie, Gordon 9, 24 Donahue, Carly 26 Donegan, Sean 4, 24 Donmez, Alkan 3 Donnell, Kristen M. 8 Donskoy, Dimitri 16 Douglass, Alexander CS 12 Downey, Austin 32 Dryburgh, Paul 3 Du, Jian 25 Du, Xiaosong 5, 35 Ducasse, Eric 27 Duchting, Julia 33 Dunn, Darrell 18 Dvorsky, M. 33 Dziedziech, Kajetan 16 Dziewierz, Jerzy 25 Eckel, Sebastian 20 Eckstein, Carlos B. 9 Elabbasi, Nagi 13 Elliott, Joshua 25 Elshafiey, Obaidallah 34 Ewert, Uwe 20

Ezell, Dianne 21 Faierson, E. 3 Fan, Chengguang 33 Fan, Zheng 2, 25, 26, 30 Farnhammer, Johanna 23 Farrell, Shannon P. 32 Faurschou, K.F. 18 Feng, Kan 4 Feng, Yijing 9 Fernandez-Ramirez, Karla 34 Fifield, L.S. 18 Flores, Mark 20 Fonesca, Maria Cindra 33 Fong, Jimmy 2 Forsyth, David 5, 23, 24 Frankforter, Erik 22 French, Arthur 3 Fromme, Paul 6 Fuchs, Brian 35 Fuentes, Rafael 19 Furse, Cynthia M. 34 Gachagan, Anthony 7, 25 Gammell, Paul 33 Gan, Bang 33 Gan, Hiong Yap 8 Gao, Xiang 26 Gao, Xiaorong 33 Gao, Y. 7 Garboczi, Edward J. 7 Garrett, James H. 5 Gauthier, Baptiste 27 Genter, Kristen L. 7 Gerritsen, Terry 28 Ghadai, Sambit 20 Ghasr, Mohammad Tayeb 7, 8, 21, 33 Giling, Erwin 2 Giuffre, Christopher 2 Gjersvik, Adam 15 Gkortsas, Vasileios-Marios 9 Glass, Samuel W. 14, 18* Gogelein, Anian 23 Golchinfar, Behnoush 16 Goodlet, Brent 16, 17 Goodner, Ryan 20 Goto, Takahiro 21 Graetzel, Michael 28 Grandin, Robert J. 22 Gray, David 19 Green, William 7 Gregory, Elizabeth 8, 27, 31, 32 Grotenhuis, Raymond 29 Grunsteidl, Clemens 19 Guan, Xuefei 21 Guers, Manton 14, 26 Gueudre, Cecile 2 Guo, J. 4 Gupta, Mool C. 16 Gurrala, Praveen 35

-38-

Guzas, Emily 13 Hadjria, Rafik 27 Hakoda, Christopher 6 Haldren, Harold 16 Hameed, M. Saqib 11 Han, Jun 29 Han, Xiaoyan 8*, 13* Harley, Joel B. 5*, 12*, 34 Haroon, Mohammad 34 Hasanian, Mostafa 35 Haslinger, Stewart 31 Hassan, Waled 15, 32 Hassiotis, Sophia 16 Hatanaka, Hiroaki 15 Hato, Masahiro 15 Haupert, Sylvain 29 Hayashi, Takahiro 1 Hayward, Gordon 29 He, Cunfu 14, 19, 28, 31, 32 He, Jingjing 16, 21 He, Zhu 8 Heckel, Thomas 25, 29 Heffernan, Julieanne 16, 17 Hegarty, M. 25 Heinlein, Sebastian 11, 27 Henkel, Benjamin 23 Henkel, Dan 3 Henning, Bernd 33 Henry, Christine 5, 16 Hernandez, F. 14 Herrera-Chavez, Lourdes Y. 33 Herve, Nancy 32 Hettich, Mike 19 Heyliger, Paul R. 7 Hino, Takehisa 3 Hoffmann, Kathrin 35 Holland, Stephen 8*,13*, 16, 22, 24* Homa, Laura 5 Hong, Andrew 29 Hopkins, Deborah 4 Horne, Michael R. 8, 22 Horne, Samuel 2 Hou, Dibo 24 Hrabe, Nik W. 7 Hu, Hongwei 25 Hu, J. 15, 34 Hu, Ping 17 Huang, Liping 6 Huang, Ming 17, 31 Huang, Pingjie 24 Huang, Yan 32 Hubert, Pascal 32 Hull, Amy 18 Huthwaite, Peter 2, 12, 17, 20, 22, 25, 31 Hutson, Alisha 28 Iakovleva, E. 29 Imperiale, Alexandre 22, 27 Ingemi, C. 15

Ingram, Marcus 25 Islam, Showmic 17 Jack, David 14 Jackson, William 9 Jacobs, Laurence J. 21, 35 Jacquemetton, Lars 7 Jahazi, Mohammad 2 Jared, Bradley H. 35 Jauriqui, Leanne 16, 17 Javadi, Yashar 7 Jayakumar, Naveen KT 34 Jeffrey, Taylor D. 14 Jeong, Hyunjo 30 Jhang, Kyung-Young 30 Ji, Xuanrong 6 Jiafan, Cai 33 Jiahong, Qi 11 Jian, John 2, 31 Jiao, Jingpin 28, 31 Jimenez, Edward S. 20*, 34 Jin, Jiang 26 Johannesmann, Sarah 33 Johnson, Ward 7 Johnston, Patrick 4 Ju, Taeho 21 Juarez, Peter 8 Juhl, Abigail 16 Jumel, Julien 26 Jun, Jihyun 30 Kalkowski, Michal 22 Karve, Pranav 27 Kashubin, Artem 25 Kauffmann, Pierre 2 Kermani, Alireza 13 Khazanovich, Lev 21 Kim, Chang-Soo 30 Kim, Changgong 35 Kim, Felix 3, 7 Kim, Gunwoo 33 Kim, Jin-Yeon 35 Kim, Jongbeom 30 Kim, Ki-bok 33 Kim, Kwang Yul 34 Kim, Yoon Young 33 Kingston, Samuel 34 Kitamura, Kenji 35 Kobayashi, Noriyasu 3 Kodjo, Serge A. 32 Koester, Lucas 3*, 34 Kohler, Bernd 30 Koodalil, Dileep 35 Koundinyan, Srivathsan 34 Kovacevic, Jelena 5 Kramb, Victoria 4, 16 Krause, Thomas W. 5, 18, 28, 32 Krishna, Aditya 27 Krishnamurthy, Adarsh 20, 22 Kube, Christopher 26, 31

-39-

Kuchibhatla, Sai 35 Kulakovskyi, Andrii 27 Kurtis, K.E. 21 Kwon, Se-gon 33 LaCombe, Josiah 34 Ladewig, Alexander 23 Laflamme, Simon 32 Lamouche, Guy 3 Lan, Bo 31 Lanherne, Callum 22 Lareau, J.P. 14 Laroche, Nans 29 Lauper, M. 6 Le, Duc Tho 11 Le, Quang Hung 11 LeBerre, Stephane 29 Leckey, Cara A.C. 4*, 22*, 27, 31, 32 Ledesma, Rodolfo 4 Lee, Joo Kyung 33 Lee, Jun Kyu 33 Leifsson, Leifur 5, 35 Lessard, Larry 32 Lesselier, Dominique 8 Lesthaeghe, Tyler 13, 16, 24 Leung, Michael 27, 28 Levesque, Daniel 19* Lhuillier, Pierre-Emile 18 Li, Jia 22 Li, Jian 32 Li, Jianyu 9 Li, Li 31 Li, Minghui 29 Li, Peilu 33 Li, Shan 31 Li, Sinan 29 Li, Wei 34 Li, Wenqi 3 Li, Xiongbing 7, 17, 25, 30, 31, 35 Li, Zheng 4, 11 Li, Zhongchuan 20 Liang, Chen-Wei 32 Liao, Shusheng 34 Lim, Do Hyeong 33 Lin, Bruce 18 Lin, Jing 2, 6 Lin, Shan 31 Lindgren, Eric 4, 23, 24, 27 Lissenden, Cliff 6, 14, 18, 26, 35 Liu, Jingxiao 5 Liu, Jun 21 Liu, Menglong 6 Liu, Mingkun 31 Liu, Xiling 31 Liu, Yang 9* Liu, Yu 7 Liu, Yuan 27 Livings, Richard 16, 17 Long, Craig 35

Lopez, B. 14 Lopez, Victor H. 33, 35 Lotfi, Muhammad 34 Lou, T. 7 Lou, Xiaoyuan 35 Loveday, Philip 2, 35 Lowe, Michael J.S. 2, 12, 17, 22*, 25, 31 Lv, Hongtao 31 Lyu, Yan 14, 19, 31 Machado, Bruna 33 MacLeod, Charles 7, 9, 24 Madigan, R. Bruce 7 Magnuson, Carl 24 Mahadevan, Sankaran 27 Maierhofer, Christiane 8 Mal, Ajit 6 Malkin, Rob 29 Man, Chi-Sing 31 Mariani, Stefano 11, 27 Marques, Leonel 19, 30, 33 Marshall, Stephen 9 Masserey, B. 6 Masson, Patrice 32 Masurkar, Faeez 19 Mathews, V. John 30 Matlack, Kathryn 26*, 35 Matz, Nathanial 17 Mayes, Alexander 16, 17 Mazdiyasni, Siamack 16, 17, 28 McConnell, Jennifer 32 McGregor, Alexander 24 McInnis, Chevonne 13 McKee, Jessica 29 McVay, Elaine 7 McWilliams, Brandon 7 Medfouni, Ishak 32 Meeker, William 35 Meng, Fanyong 20 Merciu, Ioan A. 9 Mesnil, Olivier 5, 27*, 32* Meyendorf, Norbert 20*, 23* Meyer, Ryan 18 Miele, Sarah 27 Mineo, Carmelo 7, 25 Miorelli, Roberto 5, 12, 29 Mirala, Ali 8 Missous, Mohamed 32 Moghavvemi, Mahmoud 34 Moldenhauer, Henry 13 Mooers, Ryan 5 Moore, David G. 3 Moore, David S. 23 Mora, Pierric 26 Moradi, Emilia 30 Morelli, J. 18 Mori, Fumiko 6 Motta, Mauricio S. 33 Moyer, C. 18

-40-

Moylan, Shawn 7 Mulholland, A. 25 Murphy, R. Kim 28 Myers, J.J. 33 Na, Jeong K. 17 Nagarajah, Romesh 35 Nagel, John 15 Nagy, Peter B. 2, 13, 26*, 27, 28, 32*, 33 Nakagawa, Norio 28 Nakane, Masayo 3 Nakao, Shogo 2 Natwick, Melissa 19 Nazin, Shakila 19 Neblett, Carter 26 Netzelmann, U. 4 Nicholson, Pascual I. 23 Ng, Kim Ming 19 Ngo Chun Yong, Andrew 8 Nguyen, Hoai 6, 11 Nguyen, Phuong Thuy 6 Nogueira, Laudemiro JR. 9 Noh, Hae Young 5 Nordon, A. 25 Norouzian, Musa 17 Obaton, Anne-Francoise 3 Obeidat, Omar 8 Ochiai, Makoto 3 Ohara, Yoshikazu 29 Ojard, Greg 4 Omar, Saad 9 Omeragic, Dzevat 9 Oneida, Erin 28 Oohashi, Takeru 15 Opitz, Jorg 23 Otterbach, Jan 28 Ouyang, Zhong 13 Pacheco, Clara J. 9 Pal, Saveri 23 Palanisamy, Suresh 35 Palmer, D. 7 Palmer, W.C. 18 Palmieri, Frank 4 Pantea, Christian 9 Park, Chung Il 33 Patel, Mihir 9 Patel, Rikesh 3 Paul, Nicolas 18 Pearson, Neil R. 24 Peng, Chaoyong 8, 25 Peng, Jianping 8, 25 Peng, Yunchao 33 Pereira, Daniel 6 Pereira, Gabriela R. 9, 28, 32, 35 Perey, Daniel F. 16 Perez-Cota, Fernando 19, 30, 33 Pham, Chi Vinh 11 Phan, Haidang 6, 11

Philippe, Dumas 29 Pieczonka, Lukasz 16 Pierce, Stephen G. 7, 23, 25 Pieris, Don 3 Pilchak, Adam 28 Pintar, Adam 7 Ploix, A.A. 2 Plotnikov, Yuri 3, 15* Pourahmadian, Fatemeh 24 Puliyakote, Sreedhar 22 Puthusseri, Renjith 35 Qi, Pan 34 Qin, Chen 21 Qin, Hantang 3 Qu, Jianmin 20, 26, 35 Quaegebeur, Nicolas 32 Radkowski, Rafael 24 Rajagopal, Prabhu 35 Ramatlo, Dineo 2 Ramezani, Majid 16 Ramirez, Sergio 33 Ramos, Helena G. 9 Ramuhalli, Pradeep 18* Rao, Jing 30 Rashidi, Mehdi 21 Ratassepp, Madis 30 Ratsakou, Almpion 8 Rebello, Joao 9, 28, 32, 33, 35 Reboud, Christophe 8, 12, 18, 28 Reed, Heather 31, 32 Reinhardt, Brian 30 Ribay, Guillemette 26 Ribeiro, Artur 9 Rieder, Hans 26 Riise, Jonathan 23 Rivard, Maxime 3 Rivard, Patrice 32 Roberts, Matthew 13 Roberts, Ron 17*, 34 Robyr, J.L. 6 Rodriguez, Samuel 27 Rokhlin, Stanislav I. 17, 22 Ross, K.S. 14 Rostami, Javad 11 Ruiz, Alberto 33, 35 Ruth, Anthony 7 Rutner, Marcus 16 Sabbagh, Elias H. 28 Sabeti, Soroosh 12 Saeed, Abubaker 2 Saleem, Aroba 28, 32 Saleh, Mashad 34 Santos, Joao 28 Santos, Rafael 28, 32, 35 Santos-Villalobos, Hector 21 Sauti, Godfrey 7 Scarpulla, Michael A. 34 Schaal, Christoph 6

-41-

Schafbuch, Paul 31 Schehl, Norm 4, 20 Scheirer, Nathan 24 Schiefelbein, Bryan 13 Schneck III, William 27, 31, 32 Schneider, Benjamin 3 Schubert Kabban, Christine 5 Schulze, Peter A. 26 Schumacher, Thomas 32 Schumm, Andreas 18, 20 Scott, Katherine 35 Senalik, C. 21 Seo, Mukyoung 33 Setshedi, Isaac 35 Seung, Hong Min 33 Sha, Gaofeng 17, 22 Shan, Shengbo 26 Shao, Wenbin 34 Shao, Yongsheng 6 Shell, Eric 28 Shen, Lu 8 Sherafat, Mohammad 32 Shi, Fan 31 Shi, Yali 33 Shim, Young-Dae 30 Shipway, N.J. 12 Shokouhi, Parisa 26 Shuai, Ju 26 Sietins, Jennifer 7 Silva, Vitor 32 Simms, Andrew 24 Simonetti, Franesco 34 Singh, Surendra 3*, 7* Sinha, Dipen 9 Siochi, Emilie 7 Skarlatos, Anastasios 8, 12, 18, 28 Skataric, M. 9 Smith, James A. 18, 19, 24 Smith, Richard J 3, 19, 30, 33 Song, Dong-Gi 30 Song, Guorong 14, 31 Song, Jiming 35 Song, Yongfeng 7, 17, 31 Sotelo, Luz D. 22 Sparkman, Daniel 4, 5*, 12*, 20, 24, 28 Spies, Martin 4, 23, 26 Spruch, W. 25 Spytek, Jakub 16 Sriraman, A. 18 Sritharan, Sri 32 Stair, Sarah 3 Stansfield, Alan 2, 31 Storck, Steven 7 Su, Riliang 25 Su, Zhongqing 6 Sugawara, Azusa 3 Sugiura, Toshihiko 35 Suknot, April 34

Sun, Nan 35 Suresh, Nived 35 Suzuki, Keigo 21 Swindell, Paul 27 Tada, Toyokazu 9 Taheri, Hossein 3, 34 Tamura, Akinori 18, 35 Tang, Q. 15, 34 Tarr, Jared 3 Taylor, Jared 15 Taylor, Michael 4 Terada, Takahiro 3 Thompson, Kyle 20, 34 Thostenson, Erik 32 Tittmann, Bernhard 14, 30 Todd, Michael 27 Toepfer, Hannes 28 Toma, E. 4 Tremblay, Nicolas 27 Trivedi, Yamankumar 14 Trottier, Camille 18 Tse, Peter 11, 19 Tsuji, Daisuke 3 Tsunoda, Takaya 21 Turner, Joseph A. 7, 17*, 22 Ubertini, Filippo 32 Uchic, Michael 4, 20 Uemura, C.O. 5 Underhill, P. Ross 5, 18, 28, 32 Van Pamel, Anton 17, 27 Vasilev, Momchil 7 Velicheti, Dheeraj 32 Veres, Istvan 19 Vogt, Thomas 11 Volker, Arno 2, 29 Wacker, J. 21 Wall, Joe 35 Wallentine, Sarah M. 4, 20, 24 Wang, Kai 6 Wang, Kevin 13 Wang, X. 21 Wang, Xianghong 25 Wang, Xianzan 33 Wang, Xiaojuan 21 Waterman, Jay 7 Watson, James 32 Webb, Kevin F. 30 Webersen, Manuel 33 Welter, John 4, 16, 20 Wen, Shuo 14 Wen-jun, Gan 33 Wertz, John 4*, 16, 20, 24 West, Graeme 9 Whiting, Justin G. 7 Wilcox, Paul D. 18, 22, 25*, 29* Wilke, Daniel 35 Willey, Carson 16 Wincheski, Russell 7, 20

-42-

Winfree, William 8, 22 Wu, Bin 14, 19, 28, 31 Wunderlich, Christian 23 Xiao, Jing 25 Xu, Chunguang 33 Xu, J.L. 14 Yamamoto, Setsu 3 Yang, Lei 33 Yang, Min 20 Yang, Yang 29 Yang, Zhaohe 24 Ye, Chengbao 24 Yi, Yinggang 16 Yicheng, Zhang 33 Ying, K. 33 Yokozeki, Tomohiro 6 Yong, Nie 33 Yost, William T. 4, 16 Yu, Jie 24 Yu, Qiuye 8 Yu, TzuYang 15, 34 Yu, Xudong 2 Yuan, Maodan 6 Zabbal, Paul 26 Zainey, David 4, 16, 20, 24 Zalameda, Joseph 8, 22 Zeng, Liang 2, 6 Zeroug, Smaine 9 Zerwekh, Sam 19 Zhang, Chenxin 29 Zhang, Chuanzeng 21 Zhang, Guangxin 24 Zhang, Haifeng 26 Zhang, Jianbo 31 Zhang, Jie 17, 25 Zhang, Kang 8 Zhang, Laibin 9 Zhang, Peng 26 Zhang, Shuzeng 30, 31, 35 Zhang, Yicheng 34 Zhang, Zhan 20 Zhao, Yong 33 Zheng, Wenpei 9 Zhou, Yu 26 Zhu, Lingchen 9 Ziehl, Paul 21 Ziolkowski, Marek 28 Zou, Fangxin 16 Zoubi, Ahmad 30 Zoughi, Reza 7, 21, 33 Zuo, Peng 2, 26

-43-

Please visit the following link to access the book of abstracts:

https://register.extension.iastate.edu/images/events/qnde/2018-Book-of-Abstracts-web.pdf

https://register.extension.iastate.edu/images/events/qnde/2018-Book-of-Abstracts-web.pdf

-44-

QNDE/AIP Policy on Authors' “Re-use” of Proceedings Paper

AIP Publishing recognizes that conference papers published in AIP Conference Proceedings are frequently a “snapshot” or “summary” of an on-going work-in-progress, and that some proceedings papers may subsequently be updated, or enhanced, for publication as a regular journal article, including submission to journals not published by AIP Publishing. In principle, we have no objections to authors wishing to make fair and reasonable re-use of material from their AIP Conference Proceedings paper, provided that such re-use is in full keeping with the standards and ethics of professional scientific publishing. Journal papers derived from work previously published in AIP Conference Proceedings must contain a substantial amount of new or previously unpublished results. AIP Publishing does not support publication of any article which is nearly identical to their paper published in AIP Conference Proceedings; such dual publication, whether accidental or deliberate, can be detrimental to an author’s publication record or history. The question of an individual author’s “fair and reasonable” re-uses of a proceeding paper, or whether there is sufficient additional material to warrant a new publication, is a matter for individual journals to decide. To support and enable informed decisions by journal editors, and referees, all authors who have re-used content from their AIP Conference Proceedings paper should supply their chosen journal with a copy of their proceedings article. This should be undertaken at the initial submission stage and should be accompanied with a clear statement describing the material reproduced from their proceedings paper. Additionally, all co-authors on the proceedings paper should be fully informed of any submission of a journal paper based on the original proceedings article. AIP Publishing requests that any author(s) deriving a journal article from their proceedings paper must include a citation to their proceedings paper, whether that paper has been published or is due to be published in an AIP Conference Proceedings volume. The citation will demonstrate compliance with this policy and is in the interest of openness and disclosure.

-45-

CONFERENCE EVALUATION FORM 45th ANNUAL REVIEW OF PROGRESS IN QNDE

Davis Center, University of Vermont, Burlington, VT. July 15 – 19, 2018

We value your opinions. Your input will be used in planning future QNDE conferences. Please rate the following and share any concerns you have.

Excellent

Satisfactory

Not Satisfactory

Specific Concern

Pre-conference communication and pre-registration procedures

Conference communication and organization at meeting site

Meeting Facilities: Plenary, Technical/Poster Sessions

Audio-Visual

Welcome Event: Sunday

Evening Reception: Tuesday Banquet: Tuesday Break Items: Monday - Thursday 5K Fun Run: Wednesday

Conference lunches: Monday-Thursday

Please rank past QNDE conference sites; 3 Excellent, 2 Satisfactory, 1 Unsatisfactory.

Appeal of Meeting

Site

Quality of Meeting Facilities

Costs

Comments

’17 Utah Valley Convention Center, Provo, UT

’16 Georgia Tech Hotel, Atlanta, GA ‘15 Hyatt Hotel, Minneapolis, MN ‘14 Boise Centre, Boise, ID ‘13 Hilton Hotel, Baltimore, MD

Please recommend future QNDE conference sites and / or share additional comments:

Thank you for your participation. Forms will be collected at the conference site. They can also be mailed to Robyn Davis: QNDE Programs, ASC II, 1915 Scholl Road, Ames, IA 50011 OR emailed to [email protected].

mailto:[email protected]

davis center, university of vermont burlington, … · younho cho, pusan national university,...

Documents