data sheet programmable controller type...

DKRCC.PD.RI0.G5.02 / 520H10004 www.danfoss.com/mcx

MYK connection Modbus RS485

485Memory card Ethernet

y 14 analog and 18 digital inputs

y 6 analog and 15 digital outputs

y Power supply 24 V AC and 110 V / 230 V AC

y Up to two drives bipolar and unipolar electronic expansion valves

y SD/MMC card slot for easy software upload and datalogging

y Remote access to data through CANbus connection for additional display and keyboard

y RTC clock for managing weekly time programs and data logging information

y Ethernet/WebServer option

y Up to two Modbus RS485 opto-insulated serial interface

y Available with graphic LCD display and without display for showing the desired information

y Dimensions 16 DIN modules

Features MCX152V

MCX152V is a standard MCX electronic controller that stands on the top of MCX range thanks to its large number of input and output and two integrated electronic expansion valves drivers. It is available in the version with or without graphic LCD display, and 110/230 V AC or 24 V AC power supply. It holds all the typical functionalities of MCX controllers: programmability, connection to the CANbus local network and up to two Modbus RS485 serial communication interfaces. It is moreover fitted with the slot for SD/MMC memory card and Ethernet connector. The memory card assures SW download and the datalogging function; the Ethernet port allows the SW download, monitoring with web pages, datalogging and the alarms warning.

Data sheet

Programmable controllerType MCX152V

Data sheet MCX152V

2 DKRCC.PD.RI0.G5.02 / 520H10004 © Danfoss A/S (RAC-DCS-IMCGP / az), 2015-04

General features FEATURES DESCRIPTION

Power supply

85 – 265 V AC, 50/60 Hz. Maximum power consumption: 27 W, 48 VA. Insulation between power supply and the extra-low voltage: reinforced

24 V AC ± 15% 50/60 Hz. Maximum power consumption: 27 W, 43 VA. Insulation between power supply and the extra-low voltage: functional

Plastic housingDIN rail mounting complying with EN 60715

Self extinguishing V0 according to IEC 60695-11-10 and glowing/hot wire test at 960 °C according to IEC 60695-2-12

Ball test 125 °C according to IEC 60730-1. Leakage current: ≥ 250 V according to IEC 60112

Operating conditions CE: -20T55, 90% RH non-condensing

Storage conditions -30T80, 90% RH non-condensing

Integration In Class I and/or II appliances

Index of protection IP40 only on the front cover

Period of electric stress across insulating parts Long

Resistance to heat and fire Category D

Immunity against voltage surges Category II

Software class and structure Class A

Approvals

CE compliance:This product is designed to comply with the following EU standards:

- Low voltage guideline: 73/23/EEC - Electromagnetic compatibility EMC: 89/336/EEC and with the following norms:

• EN61000-6-1, EN61000-6-3 (immunity for residential, commercial and light-industrial environments)

• EN61000-6-2, EN61000-6-4 (immunity and emission standard for industrial environments)

• EN60730 (Automatic electrical controls for household and similar use)

UL approval: - UL file E31024

© Danfoss A/S (RAC-DCS-IMCGP / az), 2015-04 DKRCC.PD.RI0.G5.02 / 520H10004 3

Data sheet MCX152V

Inputs/outputs I/O TYPE NUM SPECIFICATIONSAnalog inputs

Max 15 V input voltageDo not connect voltage sources without current limitation (overall 80 mA) to analog inputs while unit is not poweredOpen circuit HW diagnostics available for all analog inputs

0/1 V, 0/5 V, 0/10 V

14 AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10, AI11, AI12, AI13, AI14

NTC 14 AI1, AI2, AI3, AI4, AI5, AI6, AI7, AI8, AI9, AI10, AI11, AI12, AI13, AI14NTC temperature probes, default: 10 kΩ at 25 °C

0/20 mA; 4/20 mA

8 AI1, AI2, AI3, AI5, AI8, AI9, AI10, AI12

Pt1000 8 AI1, AI2, AI3, AI7, AI8, AI9, AI10, AI14

Differentialinput

2 AI5(-), AI6(+);AI12(-), AI13(+)Differential input, DM Voltage 0...300 mV; CM voltage max 14 V

Auxiliary Supplies

2 15 V+ and 5 V+5 V+ max: 140 mA (total on all outputs)15 V+ max: 200 mA (total on all outputs)

Digital input

Voltage freecontacts

16 DI1, DI2(Frequency input) min. pulse time 2.5 msDI3, DI4, DI5, DI6, DI7, DI8, DI9, DI10, DI11, DI12, DI13, DI14, DI15, DI16Min pulse time 64 ms

24 V optoins

2 DI17, DI18Digital Inputs optoinsulated 24 V AC / 50/60 Hz o 24 V DC. Rated current: 5 mA

230 V AC optoins

2 DI17, DI18Inputs optoinsulated, 230 V AC / 50/60 Hz. Basic insulation. Rated current: 2 mA at 230 V AC; 1 mA at 110 V AC

- NOTE: when the 230 V AC DI17H input is used, the corresponding 24 V DI17 input is not available anymore; the same for the couple of inputs DI18H and DI18

Analog outputs

0/10 V DC 6 AO1, AO2, AO3, AO4, AO5, AO6Current max: 10 mA

PWM,PPM

2 AO3, AO6 - pulse output, synchronous with mains, at modulation of impulse position (PPM) or modulation of impulse width (PWM): 6.8 V open circuit

- pulse output, PWM with range from 20 Hz to 1 kHz: 6.8 V open circuit

Data sheet MCX152V


Inputs/outputs I/O TYPE NUM SPECIFICATIONSDigital output

Relay 15 Concerning the insulation distance there are three groups of relays: - group 1: relays 1 to 8 - group 2: relays 9 to 12 - group 3: relays 13 to 15

Insulation between relays: functionalInsulation between relays of group 1 and 2 and 3: reinforcedInsulation between relays and the extra-low voltage parts: reinforcedC1-NO1 to C12-NO12Normally open contact relays 5 A

- characteristics of each relay:• 5 A 250 V AC for resistive loads - 100.000 cycles• 3 A 250 V AC for inductive load - 100.000 cycles with cos(phi) = 0.4• UL: 1/8 hp, C300 pilot duty, 125/250 V AC, 30.000 cycles

C13-NO13 to C15-NO15Normally open contact relays 16 A

- characteristics of each relay:• 7 A 250 V AC for resistive loads - 100.000 cycles• 3.5 A 250 V AC for inductive load - 230.000 cycles with cos(phi) = 0.4• UL: 6 A resistive, 240 VA, 30.000 cycles, 1/2 hp, 470 VA pilot duty, 240 V AC,

30.000 cyclesC1-NO1 to C3-NO3, C13-NO13 to C15-NO15Optionally they can be solid state relays

- characteristics of each relay:• 15-280 Vrms, 1 A• UL: 1 A resistive, 240 V AC, 30.000 cycles

Steppermotor

2 ST1, ST2, ST3, ST4Bipolar and unipolar stepper motor output:

- Danfoss ETS Valves (green, red, black, white) - Saginomyia UKV/SKV/VKV/PKV (black, red, yellow, orange) - other Valves:

• drive mode 1/8 microstep• peak phase current: 500 mA• max drive voltage 30 V• max output power 5 W

Battery backup

1 BATT18 – 24 V DC:

- leakage current max 12 μA - max battery current: 0.85 A @18 V

Mem.card

1 SD/MMCMax 2 GB:

- for data logging make sure that the memory card is firm in place - avoid installations with vibrations


Data sheet MCX152V

MCX

152V

- TO

P

MCX

152V

- BO

TTO

M

whi

tebl

ack

red

gree

n

STEPPERMOTOR 2

RS485-1

SD/MMC

ST2

4

ST2

3

ST2

2

ST2

1

COM

1

D1

+

D1

-

RS485-2

COM

2

D2

+

D2

-

DIGITAL INPUT 18 DIGITAL OUTPUT 9-12 DIGITAL OUTPUT 13-15STEPPER BACKUP

COM

+ BA

TT

DIGITAL INPUT 1-8 DIGITAL INPUT 9-16POWERSUPPLY

L N

MEMORY CARD ANALOG OUTPUT 1-6 ANALOG INPUT 1-7

CAN CAN-RJ ETHERNET DIGITAL INPUT 17

ANALOG INPUT 8-14

RS48

5(M

odbu

s)

supervisorynetwork

CAN

bus

CAN

buslo

cal n

etw

ork

COM

CAN

L

CAN

H

R120

COM

17

DI 1

7

DIGITAL OUTPUT 6-8

NO

8 C 8

NO

7 C 7

NO

6 C 6

DIGITAL OUTPUT 1-5

NO

3 C 3

NO

2 C 2

NO

5 C 5

NO

4 C 4

NO

1 C 1

CAN

-RJ

CAN

bus

ETH

supervisorynetworkMMIGRS

N

L

N

L

N

L

5 A

AO 1

AO 2

AO 3

5 A

5 A

5 A

5 A

5 A

5 A

5 A

whi

tebl

ack

red

gree

n

oran

geye

llow

Red

blac

k

oran

geye

llow

Red

blac

k

STEPPERMOTOR 1

ST1

4

ST1

3

ST1

2

ST1

1

PWM

-PPM

-0/1

0 V

UN

IVER

SAL

UN

IVER

SAL

UN

IVER

SAL

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

0/10

V

0/10

V

AO 4

AO 5

AO 6

PWM

-PPM

-0/1

0 V

0/10

V

0/10

V

AO 6

AO 5

AO 4

COM

AO 3

AO 2

AO 1

COM

NTC, Pt1000,ON/OFF, 0/1 V,0/5 V, 0/10 V,

0/20 mA, 4/20 mA

+

18 V

BATTBACKUP

UN

IVER

SAL

UN

IVER

SAL

UN

IVER

SAL

PRO

GRA

MM

ABL

E

Out

onl

y ba

ckup

bat

tery

NTC, Pt1000,ON/OFF, 0/1 V,0/5 V, 0/10 V,

0/20 mA, 4/20 mA

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

DI 1

7H

7 A

7 A

7 A

7 A

7 A

7 A

5 A

5 A

5 A

5 A

15V+

COM

DI 9

DI 1

0

DI 1

1

DI 1

2

COM

DI 1

3

DI 1

4

DI 1

5

DI 1

6

COM

DI 1

DI 2

DI 3

DI 4

COM

DI 5

DI 6

DI 7

DI 8

DI 1

8H

DI 1

8

COM

18

C 9

NO

9

C 10

NO

10

C 11

NO

11

C 12

NO

12

C 13

C 13

NO

13

NC

13

C 14

NO

14

NC

14

C 15

NO

15

NC

15

To th

e A

I

To th

e A

I

To th

e A

I

To th

e A

I

COM

COM

15V+AI 7

AI 6

AI 5

5V+

AI 4

AI 3

AI 2

AI 1

COM

COM

15V+

AI 1

4

AI 1

3

AI 1

2

5V+

AI 1

1

AI 1

0

AI 9

AI 8

PRO

GRA

MM

ABL

E

ETS/KWSvalves

Saginomyavalves

Dan

foss

80G

8043

.01

MCX

152V

- TO

P

MCX

152V

- BO

TTO

M

whi

tebl

ack

red

gree

n

STEPPERMOTOR 2

RS485-1

SD/MMC

ST2

4

ST2

3

ST2

2

ST2

1

COM

1

D1

+

D1

-

RS485-2

COM

2

D2

+

D2

-

DIGITAL INPUT 18 DIGITAL OUTPUT 9-12 DIGITAL OUTPUT 13-15STEPPER BACKUP

COM

+ BA

TT

DIGITAL INPUT 1-8 DIGITAL INPUT 9-16POWERSUPPLY

L N

MEMORY CARD ANALOG OUTPUT 1-6 ANALOG INPUT 1-7

CAN CAN-RJ ETHERNET DIGITAL INPUT 17

ANALOG INPUT 8-14

RS48

5(M

odbu

s)

supervisorynetwork

CAN

bus

CAN

buslo

cal n

etw

ork

COM

CAN

L

CAN

H

R120

COM

17

DI 1

7

DIGITAL OUTPUT 6-8

NO

8 C 8

NO

7 C 7

NO

6 C 6

DIGITAL OUTPUT 1-5

NO

3 C 3

NO

2 C 2

NO

5 C 5

NO

4 C 4

NO

1 C 1

CAN

-RJ

CAN

bus

ETH

supervisorynetworkMMIGRS

N

L

N

L

N

L

5 A

AO 1

AO 2

AO 3

5 A

5 A

5 A

5 A

5 A

5 A

5 A

whi

tebl

ack

red

gree

n

oran

geye

llow

Red

blac

k

oran

geye

llow

Red

blac

k

STEPPERMOTOR 1

ST1

4

ST1

3

ST1

2

ST1

1

PWM

-PPM

-0/1

0 V

UN

IVER

SAL

UN

IVER

SAL

UN

IVER

SAL

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

0/10

V

0/10

V

AO 4

AO 5

AO 6

PWM

-PPM

-0/1

0 V

0/10

V

0/10

V

AO 6

AO 5

AO 4

COM

AO 3

AO 2

AO 1

COM

NTC, Pt1000,ON/OFF, 0/1 V,0/5 V, 0/10 V,

0/20 mA, 4/20 mA

+

18 V

BATTBACKUP

UN

IVER

SAL

UN

IVER

SAL

UN

IVER

SAL

PRO

GRA

MM

ABL

E

Out

onl

y ba

ckup

bat

tery

NTC, Pt1000,ON/OFF, 0/1 V,0/5 V, 0/10 V,

0/20 mA, 4/20 mA

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

PRO

GRA

MM

ABL

E

DI 1

7H

7 A

7 A

7 A

7 A

7 A

7 A

5 A

5 A

5 A

5 A

15V+

COM

DI 9

DI 1

0

DI 1

1

DI 1

2

COM

DI 1

3

DI 1

4

DI 1

5

DI 1

6

COM

DI 1

DI 2

DI 3

DI 4

COM

DI 5

DI 6

DI 7

DI 8

DI 1

8H

DI 1

8

COM

18

C 9

NO

9

C 10

NO

10

C 11

NO

11

C 12

NO

12

C 13

C 13

NO

13

NC

13

C 14

NO

14

NC

14

C 15

NO

15

NC

15

To th

e A

I

To th

e A

I

To th

e A

I

To th

e A

I

COM

COM

15V+AI 7

AI 6

AI 5

5V+

AI 4

AI 3

AI 2

AI 1

COM

COM

15V+

AI 1

4

AI 1

3

AI 1

2

5V+

AI 1

1

AI 1

0

AI 9

AI 8

PRO

GRA

MM

ABL

E

ETS/KWSvalves

Saginomyavalves

Dan

foss

80G

8043

.01

Connection diagram

*NOTE: connection has to be made on the first and last local network units, make the connection as close as possible to the connector

Data sheet MCX152V


110

280 6063

Dan

foss

80G

8044

.01

Connection CONNECTORS TYPE DIMENSIONSTOP BOARDStepper motor connector 2

4 way spring-cage screw plug-in connector type

- pitch 2.5 mm - section cable 0.2-0.5 mm²

Stepper motor connector 1



Memory card connector

SD/MMC card slot

Analog output 1-6 connector

8 way screw plug-in connector type - pitch 2.5 mm - section cable 0.2-1.5 mm²

Analog input 1-7 connector

11 way screw plug-in connector type - pitch 5 mm - section cable 0.2-2.5 mm²

RS485-1 connector


RS485-2 connector


Analog input 8-14 connector


BOTTOM BOARDCAN connector 4 way screw plug-in connector type - pitch 5 mm

- section cable 0.2-2.5 mm²

CAN-RJ connector

6/6 way telephone RJ11 plug type

Ethernet connector

8/8 way RJ45 plug type

Digital input 17 connector


Digital output 6-8 connector


Digital output 1-5 connector


Power supply connector


Stepper backup connector


Digital input 1-8 connector






Digital input 18 connector






Dimensions


Data sheet MCX152V

User interface TYPE FEATURES DESCRIPTIONLCD display

Display STN blue transmissive

Backlight White LED backlight adjustable via software

Contrast Adjustable via software

Format 128x64 dots

Active visible area 58x29 mm

Keyboard Number of keys 6

Keys function Settled by the application software

Ordering DESCRIPTION CODE NO.MCX152V, 24V, LCD, 2 RS485, ETH, Single Pack 080G0284

MCX152V, 230V, LCD, 2 RS485, ETH, Single Pack 080G0285

MCX152V, 24V, 2 RS485, Single Pack 080G0313

data sheet programmable controller type...

Documents