data recovey doc11

8/12/2019 Data Recovey Doc11

1/12

Ericsson OSSata

Recovery


2/12

Checking data on Node :

Login to the node :

tzuas01{nmsadm} # eaw DSMSC01

stmmpL // To check MP IDs

MPID STATUS MP-NAME

1005 running MP1005

1006 running MP1006

C:\>s:

S:\>cd STS\Data\Deliverybuffdir

S:\STS\Data\Deliverybuffdir>dir /od // Path for S drive

Volume in drive S is Disk S

Volume Serial Number is 18B3-DD47

Directory of S:\STS\Data\Deliverybuffdir

04/03/09 03:00 AM MP1000_200904022200_503

01/21/11 11:00 AM MP1000_201101210600_937

02/17/14 01:00 PM MP1005_201402170900_4283

02/17/14 01:00 PM 64 ASN1WriterCache.tmp

02/17/14 01:00 PM MP1006_201402170900_4283


3/12

C:\>afplsl // To check the destAFP TABLE

TRANSFER QUEUE USER GROUP

STS1

SOURCE DIRECTORYS:\STS\DATA\DELIVERYBUFFDIR

REMOVE DELAY REMOVE TIMER DEFAULT STATUS DESTINATION SET

5760 0 READY OSSDEST1

C:\>

K:\AES\data\cdh\ftp\ossdest1>cd Ready // Path for K Drive

K:\AES\data\cdh\ftp\ossdest1\Ready>

To check the Defined Counters at node:

C:\>stmrp -l -L

REPORTID IN-USE NAME OBJECT TYPES

2002 yes SDMCEL2 CHGRP0F CHGRP0H CLRATECHG CLRXQUAL CLSDCCH

CLSMS CLTCHDRAF CLTCHDRAH CLTCHDRF

CLTCHDRH CLTCHFV1 CLTCHFV2 CLTCHFV3

CLTCHFV3C CLTCHHV3 CLTCHHV3C CP DIGPATH

DIP DOWNTIME EMGPRS GPRSGEN

2005 yes SDMECL3 IDLEOTCHH IDLEUTCHF IDLEUTCHH LAPD LOADREG

LOAS MOTG MOTS NCELLREL NECELASS NECELHO

NECELHOEX NECELLREL NICELASS NICELHO

NICELHOEX PREEMP RANDOMACC RNDACCEXT SAE

TRAPCOM TRAPEVENT TRASEVENT

2006 yes SDMCEL1 ATERTRANS BSC C7SL1 C7SL2 CCCHLOAD

CELEVENTD CELEVENTH CELEVENTI CELEVENTS

CELEVENTSC CELLCCHDR CELLCCHHO CELLCONF


4/12

CELLDUALT CELLFERF CELLFERH CELLFLXAB

CELLHCS CELLPAG CELLSQI CELLSQIDL CELTCHF

2010 yes NEWSTS1 BSCGPRS BSCGPRS2 CELLGPRS CELLGPRS2

CELLGPRS3 CELLGPRS4 CELLQOSEG CELLQOSG

CELLQOSS CELTCHH CLTCH RLINKBITR

TRAFDLGPRS TRAFGPRS2 TRAFGPRS3 TRAFULGPRS

C:\>

Checking data on OSS :

Once data is available on OSS in Users home directory, copy it to OSS path :

/ var/opt/ericsson/sgw/outputfiles/asn1/apg_sts/MGBSC29

Example :

root@tzoss01:/home/anjain# root@tzoss01:/home/anjain# lsl

C20140220.2100-20140220.2200_MP1000

C20140220.2100-20140220.2200_MP1001

C20140220.2100-20140220.2200_MP1002

bash: root@tzoss01:/home/anjain#:

root@tzoss01:/home/anjain# cp -p C20140220.2100-20140220.2200_MP1001

C20140220.2100-20140220.2200_MGBSC29:1001

Then copy data to ENIQ path :

root@tzoss01://var/opt/ericsson/sgw/outputfiles/asn1/apg_sts/MGBSC29# cp -p C20140217.0900-20140217.1000_MGBSC29:1006 /ossrc/data/pmMediation/pmData/bsc-apg/dir1/


5/12

Checking data on ENIQ

1.1 Admin UI (Admin Tool)This is the web based interface from which most of the Administrative activity can

be done.Figure 1is the snapshot of the login screen for this tool.

To start Admin UI login to any of the windows server.

Open Web browser, Admin UI supports Microsoft Internet Explorer and Mozilla-based browsers.

Navigate to http://YourLoaderServerIP:8080/adminui/, where YourLoaderServerIPis the IP address of the ENIQ Server.

Enter credentials and click on Login.

Figure 1: Admin UI

1.1.1 Checking System StatusAdministrator should check System status on daily basis. To check the system status

either login into Admin UI or into ENIQ system by SSH tool (Putty Secure CRT).Both methods are described below:


6/12

Figure 2: Checking System Status

1.1.2 Checking Data LoadingAdministrator needs to check data loading for every measurement; Admin UI is usedto view data loading status.Figure 5is the snapshot which shows the data loadingstatus corresponding to every measurement. To check data loading status, Follow the

below steps:

S

.

N

o

Tab Information On

1

.

Host Information It gives status about the

server hardware.

2

.

ENIQ DWH It gives the status about

the database which

stores the PM raw data.

3

.

ENIQ REP It gives the database

status in which ENIQ

configuration data is

stored.

4

.

Engine It gives ENIQ engine

status.

5

.

Scheduler It gives the ENIQ

scheduler status which

trigger the sets

execution


7/12

In Admin UI click Show Loadinglink which is highlighted in red color in Figure 5. Select date, Techpack and filter shown in different color in Figure 4. Click Get information. Check the loading status.

Corrective Action: If data is not loaded for 24 hrs then follow the Section 6.2.8.

Figure 3 Data Loading Status

Figure 4 Data Loading Status


8/12

Figure 5: Data Loading Status

1.1.3 Data Loading Status Color Description

Status Significance

Loaded Data is Loaded into database.

Not Loaded Data is not loaded yet into database

Check Failed Monitoring rule threshold were not met

Hole Data is not loaded within time.

Calculating ENIQ is calculating the number of rows that were loaded.

Table 6: Different Data Loading Status


9/12

1.1.4 Checking Aggregation StatusAdministrator should check aggregation status on the daily basis. Data Aggregation

is done on daily, weekly and monthly basis.

Figure7,8and9are the snapshots of the aggregation status .To check aggregation

status follow the given below steps:

In Admin UI, click Show Aggregationslink which is highlighted by red coloredcircle in Figure 7.

Select date and Techpack. Click Get Information.

Figure 7 Checking Aggregation Status

Figure 8: Daily Aggregation Status


10/12

Figure 9: Week Aggregations

Figure 10 Month Aggregations

See given below table for all aggregation status specification:

S no Status Specification

1

MANUAL Aggregation was set to MANUAL state by user for

re aggregation.

2

IGNORED Aggregation was set to IGNORED state by user.Automatic aggregation will ignore this

aggregation.

3

LOADED Data is loaded into database

4

NOT LOADED Data is not yet loaded into database.


11/12

Table 7: Different Aggregation Status

Corrective Action: If there is any error in aggregation (day, week, month) then

inform the solution support team so that corrective actions can be taken.

1.1.5 Data Re aggregationAdministrator need to re-aggregatedata when one of the given below situationoccurs:

PM data arrived late to ENIQ system. Server was down because of which aggregation didnt happen.

To re aggregatedata follow the given below steps.

In Admin UI, clickRe aggregation. Select the time level, start time, end time, and technology package. Click on List button which is highlighted in yellow color in Figure 17; to get a list of

measurement types.

Select the measurement types to be re aggregatedand clickAggregate.After re aggregation whole data will be used from RAW table and will be insertedinto aggregated table.

5

LATE_DATA The measurement type has been aggregated, but

data has been loaded to the database after the

aggregation.

6

CHECK_FAILED Monitoring rule thresholds were not met.

8

ERROR Unrecoverable error during aggregation.

9

BLOCKED Aggregation was prevented by gatekeeper to avoid

aggregation conflicts. Aggregation will be tried

again on the next execution of automatic

aggregation.

QUEUED Aggregation has started.


12/12

Figure 11: Data re aggregation

data recovey doc11

Documents