dampness in buildings 1
DESCRIPTION
Dampness in Buildings - power point presentationTRANSCRIPT
Click to edit Master title style
Division of Sustainable Development
DAMPNESS IN BUILDINGS
Division of Sustainable Development
Today you will develop
An understanding of the causes and effects of damp in buildings
An appreciation of how it can be identified
An understanding of remedial actions to solve the problem
The ability to identify features of new buildings that try to prevent damp from being a problem.
Division of Sustainable Development
Dampness in BuildingsApproved Document C
Site preparation and resistance to contaminates and moisture (2004 Edition)
Protect building and people from harmful effects caused by • Ground moisture
• Rain
• Interstitial and surface condensation
• Spillage of water from sanitary objects
AD Part C
Click to edit Master title style
Division of Sustainable Development
WHAT IS DAMPNESS?
Division of Sustainable Development
What is Dampness?
Service Performance
• Ambient temperature
• Amount of precipitation
• Relative humidity
• Position & exposure of materials
Division of Sustainable Development
What is Dampness?Damp is generally defined as unwanted water or moisture.
The existence of dampness in buildings is one of the most damaging failures that can occur in buildings.
It can cause• Damage in brickwork by saturating it
• Decay and breaking up of mortar joints
• Dry and wet rot in timber structures
• Corrosion of iron and steel
Division of Sustainable Development
What is Dampness?Physical Effects• Freeze/thaw• Timber rot• Water staining• Cyclic wetting/drying• Insulation values reduced• Electrics made unsafe
Division of Sustainable Development
Chemical effects Efflorescence Cryptoflorescence Corrosion of ferrous metals Chemical attack (e.g. sulphate) Cohesion loss
What is Dampness?
Division of Sustainable Development
What is Dampness?Effects on Health• Ambient air conditions• Mould growth & spores• Viruses & infections• Rot & infestation• Psychological
Division of Sustainable Development
What is Dampness?
Motivational Forces• Gravity• Kinetic energy• Surface tension (also capillarity)• Hygroscopicity (e.g. salts)• Pressure differential• Temperature differential
Division of Sustainable Development
What is Dampness?
In general we can consider moisture in the walls of a building under four broad headings: • Rising damp
• Penetrating damp
• Condensation
• Entrapped moisture
Click to edit Master title style
Division of Sustainable Development
RISING DAMP
Division of Sustainable Development
Rising DampThe majority of construction materials are porous.
This means they will soak up a considerable amount of water.
Division of Sustainable Development
Rising DampRising damp is caused by a natural phenomenon called
‘capillary action’ wherein ground water is drawn vertically upwards through fine pores in a material.
Construction materials are either embedded in, or in contact with the ground which will encourage the migration of water from the ground by capillary action.
Furthermore, osmosis encourages the movement of water relative to the concentration of salts.
Division of Sustainable Development
Rising DampExtend
The extend to which a wall is affected by rising damp differs and is dependent on
• The level of moisture in the ground• The features of a wall enableling or restricting
evaporation from its surface• The porosity of the material• The chemical composition of the migrating water.
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampCauses
The occurrence of rising damp is generally associated with older properties of traditional construction.
In such properties it may well be the case that there was no effective damp-proof course (DPC) installed in the original construction.
However, this is the cause for only a small proportion of rising dampness.
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising Damp
Causes
Other potential causes of rising damp include:
1. By-passing of the DPC caused by bridging internally by a porous floor screed
2. By-passing of the DPC externally by raised paths, planting borders etc
3. By-passing of the DPC with external render coating
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampCauses
4. Rain splashing on the external ground and passing above the DPC level
5. Build-up of debris in a cavity allowing by-passing of the DPC
6. Failure to link the DPC with the impervious (watertight) membrane or damp proof membrane (DPM) in adjacent solid floors.
Division of Sustainable Development
Chudley, Greeno (2008)
Rising DampCauses
Division of Sustainable Development
Chudley, Greeno (2008)
Rising DampCauses
Division of Sustainable Development
Rising Damp
House construction
Division of Sustainable Development
Rising DampEffect• Stained decoration• Rusting to skirting nails • Decay to timber skirting• Breakdown of plasterwork
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampEffect
The presence of dampness is visible as a tidal pattern on the wall and can be measured by a moisture meter.
For rising damp moisture content will be high at low level, and diminishing quickly up the wall.
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampEffect
Due to the effect of hygroscopic salts the readings can be a bit higher at the upper extend of the pattern.
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampRemedial DPCs
The purpose of remedial DPCs is to attempt to arrest the oassage of moisture frim the ground through the walls by inhibiting the natural process of capillary action.
One can categorise the most common forms of remedial DPCs into • Chemical DPCs
• Physical DPCs
Division of Sustainable Development
Riley, Cotgrave (2005)
Remedial actionsChemical DPCs
Division of Sustainable Development
Riley, Cotgrave (2005)
Rising DampChemical DPCsThis technique uses liquid which is either
introduced into the wall by simple gravity or under pressure.
This liquid will either fill the pores of a material with water resistant material (pore fillers) or line them with a non-wettable surface to reduce capillary attraction (pore liners).
Thus a damp proof course will be created.
Division of Sustainable Development
www.apollo-uk.co.uk Riley, Cotgrave (2005)
Remedial actionsChemical DPCs
Division of Sustainable Development
www.apollo-uk.co.uk Riley, Cotgrave (2005)
Remedial actionsChemical DPCs
Division of Sustainable Development
Riley, Cotgrave (2005)
Remedial actionsPhysical DPCs
Are layers of impervious material which is inserted into a carefully cut gap.
Pieces have to overlap to make sure they are tight.
Click to edit Master title style
Division of Sustainable Development
PENETRATING DAMP
Division of Sustainable Development
Riley, Cotgrave (2005)
Penetrating DampThe occurrence of penetrating damp is highly dependent upon the
levels of exposure of the building and it is often the case that moisture penetration occurs only on certain areas or elevations of the building.
In traditional construction high levels of exposure force moisture through a wall.
In more modern buildings penetrating dampness is often associated with failures of joints and seals.
Cracks caused by other defects can also be a cause.
Division of Sustainable Development
Riley, Cotgrave (2005)
Penetrating DampTypical examples of reasons for penetrating dampness
include:
1. Rain driving through exposed masonry walls that have insufficient thickness to resist the passage of water to the interior
2. Problems associated with cavity trays in cavity walls
Division of Sustainable Development
Riley, Cotgrave (2005)
Penetrating Damp3. Failure of joints in cladding systems
4. Failure of rendered finishes
5. Leakage of externally mounted rainwater goods
6. Saturation of inappropriate insulation material in cavity walls
7. Leaking building services
Division of Sustainable Development
Penetrating DampIngress of rainfallErosion of the façade surface
materialPropulsion of the water
through openings
Division of Sustainable Development
Penetrating DampHydrostatic Pressure
Pressure exerted by liquids at rest•Below ground• Retaining walls, basements
•Above ground• Water accumulation
Impervious membranes for below ground structures, high quality concrete and modifications of the site conditions (drainage) can help to protect against the risk of penetration damp through hydrostatic pressure
Division of Sustainable Development
Penetrating DampHydrostatic Pressure
Drainage
Division of Sustainable Development
Penetrating Damp
Pressure differential
Division of Sustainable Development
Penetrating Damp
Division of Sustainable Development
Penetrating Damp
Division of Sustainable Development
Penetrating Damp
Division of Sustainable Development
Penetrating Damp
Click to edit Master title style
Division of Sustainable Development
CONDENSATION …next time
Click to edit Master title style
Division of Sustainable Development
ENTRAPPED MOISTURE
Division of Sustainable Development
Riley, Cotgrave (2005)
Entrapped MoistureThe construction process has traditionally relied on the use of
'wet trades' such as plastering and concreting, which introduce high levels of water into the building during construction.
In the period following construction there will be a natural drying process.
Some of this water will evaporate before the building is occupied.
Division of Sustainable Development
Dampness in BuildingsSome of it will be immobilised by the hydration process of
mortar and cement.
However, much of the water will remain and one cannot do much about it but it will dry out very slowly, so good ventilation and low heating during the first months will assist the drying process.
It may take a considerable period of time before all of the construction moisture is removed from the building fabric.
Division of Sustainable Development
Now you should be able to explain
The causes and effects of damp in buildings
How it can be identified
Remedial actions to solve the problem
Features of new buildings that try to prevent damp from being a problem.