8/8/2019 CV_Samy

1/3

CURRICULUM VITAEIncluding

LIST OF PUBLICATIONS AND RESEACH ACTIVITIESof

Samy Mohammad Hassan El-Behery

Teaching AssistanceMechanical Power Engineering Dept.

Faculty of EngineeringMenoufiya University

Shebin El-Kom

Egypt

1. PERSONAL DETAILSSurname El-Behery

Other names Samy Mohammad Hassan

Title Teaching Assistance

Gender MaleStatus Married

Address 2 Zaied Marwan St. from Sabry Abo Alam St., Shebin El-Kom, Egypt

Mailing Address Mechanical Power Engineering, Faculty of Engineering, Menoufyia

University, Shebin El-Kom, Egypt.

Telephone Numbers +20482325385 Evening

Mobile +20102292318 Email s_elbehery@yahoo.com

Date of birth Day

13

Mo

July

Yr

1979

Place of birth El-Kwaled, Etay El-Barod,

Behera, Egypt.

2. EDUCATIONSchool/College/University/Other Degree obtained Dates (from-to)

Mechanical Power Engineering, Faculty of

Engineering, Menoufiya University, Shebin El-

Kom, Egypt. Thesis Title: Behaviour of Two-

Phase Flow through Bends. (Awarded April 2007).

M.Sc. Nov. 2004-April. 2007

Mechanical Power Engineering, Faculty of

Engineering, Menoufiya University, Shebin El-

Kom, Egypt.

B.Sc. Oct. 1996-May. 2001

3. TRAININGTraining attended/Technical skills acquired Place Dates (from-to)Damanhour Thermal power station.

Damanour BeheraJuly 3- August 26,

1999

4. EMPLOYMENT HISTORYEmployer Position Dates (from-to)

Department of Mechanical Power Engineering,

Faculty of Engineering, Menoufiya University,

Shebin Elkom, Egypt.

Teaching Assistance May, 2007-Present

Department of Mechanical Power Engineering,

Faculty of Engineering, Menoufiya University,

Shebin Elkom, Egypt.

Demonstrator June, 2003-May, 2007

National service in the Egyptian Army. April, 2002-June 2003

mailto:s_elbehery@yahoo.commailto:s_elbehery@yahoo.com

8/8/2019 CV_Samy

2/3

5. FIELDS OF INTEREST1. Computational Fluid Dynamics. 2. Two-Phase Flow.

3. Erosion. 4. Drying Technology.

6. PUBLICATIONS

1. El-Behery S. M., Hamed M. H., El-Kadi M. A and Ibrahim K A., "Numerical simulation andCFD-Based Correlation of Erosion Threshold Gas Velocity in Pipe Bends", Accepted CFD

Letters, An International journal

2. El-Behery S. M., Hamed M. H., El-Kadi M. A and Ibrahim K A., "CFD Evaluation of Solid

Particles Erosion in Curved Ducts ", Accepted ASME Journal of Fluids Engineering.

3. El-Behery S. M., Hamed M. H., A Comparative Study of Turbulence Models Performance for

Turbulent Flow in A Plane Asymmetric Diffuser,International Journal of Mechanical

Systems Science and Engineering, Vol. 2, 2010, pp. 78-89,Proceedings of World Academy

of Science, Engineering And TechnologyVol. 53, 2009, pp. 769-780.

4. El-Behery S. M., El-Askary W. A., Ibrahim K A., and Hamed M. H., Porous Particles Drying

In A Vertical Upward Pneumatic Conveying Dryer,International Journal of MechanicalSystems Science and Engineering, Vol. 2, 2010, pp. 110-125,Proceedings of World Academy

of Science, Engineering And TechnologyVol. 53, 2009, pp. 1337-1352.

5. Hegab A., El-Askary W. A., Balabel A. and El-Behery S. M., RANS Simulation of

Turbulence in a Porous Channel with Constant Mass Injection,Proc. 13th Int. Conf. on

Aerospace sciences & Aviation Technology, Military Technical College, Cairo, Egypt, 26-28

May 2009.

6. Balabel A, Hegab A., Wilson S., Nasr M. and El-Behery S. M., Numerical Simulation of

Turbulent Gas Flow in a Solid Rocket Nozzle, 13th Int. Conf. on Aerospace sciences &

Aviation Technology, Military Technical College, Cairo, Egypt, 26-28 May 2009.

7. El-Behery S. M., Hamed M. H., El-Kadi M. A and Ibrahim K A., CFD Prediction of Air-SolidFlow in 180o Curved Duct,Powder Technology Vol. 191, 2009, pp. 130-142.

8. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Numerical Prediction of

Sand Erosion Phenomena in Curved Ducts,Proc. 5th Joint ASME/JSMEFluids Engineering

Conference, July, 2007,San Diego, California USA, paper No. FEDSM2007-37350.9. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Numerical Simulation of

Gas-solid Two-Phase Flow in 180o Curved Duct,Proc. 5th Joint ASME/JSME Fluids

Engineering Conference, July, 2007,San Diego, California USA, paper No. FEDSM2007-37351.

10. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Effect of Bend Orientation

and Flow Direction on the Behavior of Gas-Solid Flow,Proc. 8th Int. Congress of FluidDynamics and Propulsion, December 14-17, 2006, Sharm El-Shiekh, Sinai, Egypt, paper No.

ICFD8-EG-136.

11. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Prediction of Gas- Solid

Flow in Bends with Different Orientations,Engineering Research Journal, Faculty of Eng.,

Minoufiya University, Vol. 29, 2006, pp. 253-264.

12. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Gas-Solid Two-Phase Flow

in 90o Bend,Alexandria Engineering Journal, Vol. 45, 2006, pp. 417-434.

13. Ibrahim K A., El-Kadi M. A, Hamed M. H. and El-Behery S. M., Numerical Simulation of

Gas-Solid Two-Phase Flow in Curved Duct,Proceedings of ASME ATI Conference, Energy:

Production, Distribution and conservation, Milan, Italy, May 14-17, 2006.Vol. 2, pp. 981-990.

8/8/2019 CV_Samy

3/3

7. PRESENTATIONS

1."Effect of Bend Orientation and Flow Direction on the Behavior of Gas-Solid Flow", 8th Int.

Congress of Fluid Dynamics and Propulsion, December 14-17, 2006, Sharm El-Shiekh,

Sinai, Egypt.

2.RANS Simulation of Turbulence in a Porous Channel with Constant Mass Injection, 13th Int.

Conf. on Aerospace sciences & Aviation Technology, Military Technical College, Cairo,

Egypt, 26-28 May 2009.

3.Numerical Simulation of Turbulent Gas Flow in a Solid Rocket Nozzle, 13th Int. Conf. on

Aerospace sciences & Aviation Technology, Military Technical College, Cairo, Egypt, 26-

28 May 2009.

8. Research projects

Project Title: A Model of Composite Solid Propellant Combustion Including Chamber-Nozzle

Configuration, Project ID 108, From Jan 2009 to present.

9. ADDITIONAL INFORMATION

LanguagesDecember, 2008: "Test of English as a foreign Language (TOEFL)", Score (545), American

University, Cairo-Egypt

January, 2008: "Test of English as a foreign Language (TOEFL)", Score (530), American

University, Cairo-Egypt.

Computer Skills

1. Operating system:- Windows2. AutoCAD:- 2D and 3D

3. Programming Languages:- Visual BASIC, C++ and FORTRAN

4. Computational Fluid Dynamics (CFD) Code: FLUENT and its User Defined

Functions (UDF) using C Language.

5. Golden Software:- Grapher and Surfer.

6. Microsoft Office: WORD, EXCEL and P OWER POINT.

List of Undergraduate Courses Offered:

Fluid Mechanics

Computational Fluid dynamics

Gas Dynamics

Hydraulic Machines

Mechanical Engineering Drawing

Turbo-machinery

Pneumatic Systems

Hydraulic Systems

Computer Applications in Mechanical Engineering

Non Conventional Pumping Machines

Pipe network systems

Advanced fluid mechanics