cv muhammad zahid with skp

4
MUHAMMAD ZAHID Contact Address: House # E-26/18 Housing Colony Pak- American Fertilizer Limited, Iskandarabad, Mianwali. Tel : +92-3007326781 +92-3347934690 e-mail : [email protected] Skype ID : mzsaif CAREER OBJECTIVE To work with commitment and passion in a challenging and growing environment for enhanced career path and professional growth. Looking for a challenging job in an organization that offers a learning environment and enhance my skills in the field of Plant Operation as a “PLANT/DCS (Panel) OPERATOR”. Education 1991 Intermediate B Multan Board 1989 Matriculation A Multan Board 2000,2001,2004 Institute of Engineering and Technology Multan Plant operation techniques course Work Experience Ammonia and Urea Plants, Total = 17Years Now a day I am working as a DCS Supervisor Ammonia Plant. AMMONIA PLANT Working at Steam System section at DCS. On duty Reforming Section training for Ammonia Plant. Have experience work at Gas treatment Amine Section . Worked at aMDEA section Revamp work to increase the production of the plant. UREA PLANT Apprentice ship training at PAFL Urea Plant Iskanderabad, Distt. Mianwali. Two weeks special training of Urea Plant ACES Process from (Japanese) TEC Consultants at Pak- American Fertilizers Ltd. Iskanderabad, Distt. Mianwali. Two weeks special training of DCS at PAFL Training Center. Two weeks training of computer literacy for DCS Operation at NCTC Iskanderabad, Distt. Mianwali.

Upload: muhammad-zahid

Post on 16-Jul-2015

101 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CV MUHAMMAD ZAHID with Skp

MUHAMMAD ZAHID ContactAddress: House # E-26/18 Housing Colony Pak-American Fertilizer Limited, Iskandarabad, Mianwali. Tel : +92-3007326781 +92-3347934690e-mail : [email protected] ID : mzsaif

CAREER OBJECTIVE• To work with commitment and passion in a challenging and growing environment for enhanced

career path and professional growth.• Looking for a challenging job in an organization that offers a learning environment and enhance my

skills in the field of Plant Operation as a “PLANT/DCS (Panel) OPERATOR”.

Education1991 Intermediate B

Multan Board

1989 Matriculation A

Multan Board

2000,2001,2004 Institute of Engineering and Technology Multan

Plant operation techniques course

Work Experience Ammonia and Urea Plants, Total = 17Years

• Now a day I am working as a DCS Supervisor Ammonia Plant.

AMMONIA PLANT

• Working at Steam System section at DCS.• On duty Reforming Section training for Ammonia Plant.

• Have experience work at Gas treatment Amine Section . • Worked at aMDEA section• Revamp work to increase the production of the plant.

UREA PLANT

• Apprentice ship training at PAFL Urea Plant Iskanderabad, Distt. Mianwali.

• Two weeks special training of Urea Plant ACES Process from (Japanese) TEC Consultants at Pak-American Fertilizers Ltd. Iskanderabad, Distt. Mianwali.

• Two weeks special training of DCS at PAFL Training Center.• Two weeks training of computer literacy for DCS Operation at NCTC Iskanderabad, Distt. Mianwali.

Page 2: CV MUHAMMAD ZAHID with Skp

• From 21st April, 1997 to 21ST July,1997 got refresher course training for Plant Operator at UREA Plant,1750 MTPD of Pak-Saudi Fertilizers, Mirpur Mathelo Distt. Ghotki.

Agri-Tech ( Formely) Pak-American Fertilizers Company Limited

15th Feb, 1997 To Date

• a) Control Room/Panel Supervisor NH3 Plant. • b) Panel Supervisor (DCS) • c) Panel Operator (DCS)• d) Field Operator.

• From 17th March 2009 to date .• From 25th November 2006 to 17th March 2009• From 20th November 1999 to 25th November 2006.

• From 15th February 1997 to 19th November 1999.

Iskanderabad is one of the pioneers Fertilizer units of AZGARD-9, (Agritech) Group of industries. Initially in this unit

Ammonium Sulphate was produced. Later on it started a Modernization & Expansion Project of 600/1050 MTPD Ammonia/Urea

(A Project of M/S TOYO Engineering Corporation of Japan), the Kellogg/ ACES process having latest total Distributed Control System (TDCS 3000-X) which contains APM for high level calculation & advanced control strategies, LM for interlocking.

HM for system data storage, process history. Graphics display and Configuration information. The plant is also equipped with Hi-Tech centrifugal compressors with latest programmed electronic Governing control system for Extraction/ Condensing Turbines with complete interlocking for safe operation.

Skills• I have knowledge of Process Flow Diagram’s (PFD’s,) Piping & Instrumentation diagram’s (P& ID’s), Standard

Operating Procedures (SOP’s) and Permit to work Procedure (PTW).• I have knowledge of Programmed Logic Control (PLC) & Distributed Control system (DCS), basic Instrumentation

Systems.• I have knowledge of Safe Start-up , Shut Down , Trouble shooting , Emergency handling & Routine

Checks.

CIVIL DEFENSE COURSE

• I get Civil Defense Course from 26th December, 2001 to 19th January,2001 at PAFL Center.

Commissioning & Pre Commissioning Remained fully involved in pre-commissioning and commissioning activities regarding at Urea & Ammonia Plants,

Flushing of pipe lines. Steam Blowing. Catalysts loading of Hydrotreator, Desulphurizers, Primary Reformer, Secondary Reformer, Low temperature Shift

Converter, High temperature Shift Converter, Ammonia Converter and Methenator. Chemical cleaning of Steam and aMDEA circuits. Steam System Operation at Ammonia Plant. Oil flushing for Lube Oil and Control Oil lines of CO2 Compressor and Turbine. Solo run of Turbine (CO2 Compressor, Turbine) having advanced electronic digital governor. Test run of Turbine driven centrifugal Compressor (CO2 Compressor and Turbine) Water run of the whole plant. Vacuum test. Prilling test. Complete Startup / Shutdown of all the sections of new plant by DCS. Test run of High-speed centrifugal pump (Carbonate Feed Pump). Test run of High-pressure positive displacement pump with variable speed (Ammonia Feed Pump).

Page 3: CV MUHAMMAD ZAHID with Skp

105 % Load Guarantee Test of Urea Plant.

Responsibilities .My responsibilities are as follows,

• Responsible for the monitoring of plant performance,

• Study critical parameters and advice for any change in operating conditions,

• Responsible for the study, planning and realization of the maintenance and investment projects,

• Involved in the trouble shooting in the plant and assist in the activities, during shut downs,

• Identify and evaluate bottlenecks to improve the production rates of the plant,

• Should also study and make proposals for the modification of equipment, processes and instruments,

• Should maintain record of various of environmental releases, identify occupational hazards, risk assessment and control in the plant,

• Should adhere Plant Quality, Occupational Health and Safety (OH&S) and Environmental Systems and Policies.

• To assist Shift Engineer during shift regarding DCS Plant Control.

• To instruct field staff time to time about their sections during Normal operation and Emergency.• Maintaining the record of plant operating parameters.• To keep the plant running safe and smooth.• Achieve the mentioned Targets. (Assign time to time by Unit Manager)• Trouble shoots technical problems that occur during normal operation so as to keep plant running efficiently.• Now plant is running safely at 110 % load.• Hand on experience of Plant Operation through DCS and Field.

Interests Interest:

Language:

• Islamic and cultural studies, Football, Cricket, travelling, movies, music, General Knowledge, Current Affair, Reading Books.

• Make Friendship.• Work hard to achieve assigned Targets.• Keen Interest in my jobs work.• Work safely according to (OH&S )& HSSE.• English, Urdu

Page 4: CV MUHAMMAD ZAHID with Skp

Personal DataFather’s Name

Date of Birth

N.I.C. #.

Domicile

Marital Status

Religion

Permanent Address

Ch.Saif-ud-Din

23rd April, 1974.

36302-1679585-9

Multan. (Punjab)

Married

Islam

Mouza Sujanpur P.O. Bohar Tehsil & Distt. Multan.