ww

w.p

resi

.com

ww

w.p

resi

.com

LE CUBE MINITECH 233 MECATECH 334MECAPRESS 3MECATOME ST310

The best performance of all the cut-off machines in its category.Powerful: the MECATOME T330 is equipped with a 3.8 kW motor allowing the cutting of a large range of hard and soft materials.

Precise: the MECATOME T330 provides the highest level of precision thanks to its two positioning systems for Y and X axes with a 10 µm accuracy.

User-friendly: the MECATOME T330 is fully monitored by a touch screen and a highly sensitive joystick.

Reliable: the MECATOME T330 integrates oversized mechanical parts (spindles, bearings, guidance system, motor, etc) for an unequalled reliability.

Intelligent: the MECATOME T330 integrates three control systemsfor a perfect cutting every time: regulation of the cut-off wheel speed,regulation of the table feed according to the motor load and a pulsed cutting function.

Innovative: the MECATOME T330 is programmable and allows the memorizationof more than 100 processes protected by password.

Multi-purpose: the MECATOME T330 allows cutting in manual mode usingits swivel arm as well as in automatic mode using the motorized Y table.

Mecatome t330Precision cutting machine for laboratory and production works

Ref.

791

61 -

V1

- gi

nett

e by

atl

anti

c. P

hoto

s: P

RESI

.

38320 Brié-et-Angonnes - Grenoble - France. Tel.: +33 (0)4 76 72 00 21. Fax: +33 (0)4 76 72 05 84. E-mail: presi@presi.com F R A N C E S W I T Z E R L A N D S H A N G H A i H O N G K O N G

CUTTING

MOUNTING

POLISHING

HARDNESS AND MICROSCOPY

Automatic precision cutting machine Metallic hood transparent and secured Cutting methods manual, assisted, automatic or programmableCut-off wheel

Wheel material diamond or resinoidWheel diameter 250 or 300 mmRotational speed variable 1000 - 6000 rpmSpeed increments 1 rpmProgressive acceleration of the cut-off wheel Immediate stop of the cut-off wheel Direct cutting Pulsed cutting Shaft diameter 25,4 mmStainless steel flanges Ø 80 mmQuick change of the cut-off wheel

Cutting capacity Ø 110 mm or 95 x 150 mmPassage of bar on both sides of the machine Cutting table

Material anodised aluminium with interchangeable stainless steel stripsDimensions (W x D) 390 x 230 mmFeed speed 0.005 to 3 mm/secAutoregulation of the feed speed acc. to motor load Programmable cutting length Cutting length / stroke (Y axis) 0 - 240 mmPositioning accuracy Y axis 10 µmT-slots X & Y

Automatic X-table (option)Automatic positioning and serial cutting (option) stroke 0 - 100 mmPositioning accuracy X axis 10 µm

Control and setting of parametersControl with touch screen and highly sensitive joystick Programmable more than 100 programsProtection by password

Lighting of the cutting chamber Cooling and tank

External cooling tank 55 LFiltration system with removable and washable filter

Safety lock Spray nozzle for inside cleaning Emergency stop Power 3,8 kWElectrical supply 380V - 3 phases - 50/60 HzDimensions (W x D x H) 894 x 844 x 629Weight 190kgBuilt in compliance with CE standard Ref. 50300

Storage tower for consumables

Draining rack for platens Storage box Base cabinet for cut-off machine

Additional accessories

PResI, it’s also

Technical characteristics MeCATOMe T330

PRE MECATOME T330 FR-GB-1304.indd 4-1 14/04/11 11:15

ww

w.p

resi

.com

ww

w.p

resi

.com

Cut-off machine designed for laboratory and production works.

4 exclusive cutting modes

ManualThe user chooses the speedof the cut-off wheel, whetherthe pump is to be used or not,and the type of control of thewheel speed. He can visualizein real time the wheel speedand the burden on the motor.

Assisted In this mode in particular,the user controls the feed speedof the table using the joystick and defines the maximum speed.This is manual cutting withoutany effort. The user can maintaina constant wheel speed or adjustthe speed according to the burden on the motor.

Automatic In this mode, the machineperforms the cut(s) automatically. The user can maintain a constantwheel speed or decide to adjust itaccording to the burden on the motor.If the pulsed cutting mode has been selected, cutting will be performed according to pause times specified by the user. All the control systems can be used at the same time.

Program The user performs the cuttingaccording to parameters previously defined in the programs.

Various clamping systems

Operation

• MECATOME T330 can be used to cut bars and large items. The motorized X axis (optional) allows serial cutting.

• The motor and the transmission to the cutting wheel have been optimized: ultra-resistant spindle, double row of bearings, V-ribbed belt, variable frequency control, etc. MECATOME T330 offers the best performance of all the cut-off machines in its category.

• The new step motors offer an incomparable positioning accuracy of the cutting table; the variable cut-off wheel speed from 1000 to 6000 rpm optimizes the cut through all types of materials.

• The Y and X tables (X table in option) can be guided directly by the joystick. The touch screen provides a number of exclusive advantages, including programming, indication of table movements, legibility and simplicity of use.

• The MECATOME T330 is equipped with a system for blocking the cut-off wheel, making the change of the wheel very quick and easy.

• The MECATOME T330 is spacious and integrates a large table with interchangeable stainless steel strips. Maintenance of the MECATOME T330 is particularly easy as well, thanks to its internal design and inbuilt cleaning kit. The grooved table is compatible with all commercially- available clamping systems.

• 51319 Quick clamping vice.

• 51321 Quick clamping vice.

• 51356 Quick clamping vice for long samples.

• 50906 Double quick clamping vices left and right (height: 45 mm).

• 50905 Left quick clamping vice.

• 50909 Right quick clamping vice.

• 50510 Double quick clamping vices left and right (height: 70 mm)

• 50902 Double screw clamping vices left and right.

• 50901 Left screw clamping vice.

• 50903 Right screw clamping vice.

• 50613 Box of Kopal holders.

• 50616 Kopal holder.

• 51156 Orientable chuck.

• 51713 Chuck for small samples (vice type).

• 51714 Chuck for cylindrical samples.

• 51716 Chuck for irregular shaped samples.

• 51715 V-shaped sample chuck.

• 51717 Vice chuck for longitudinal cuts.

• 51162 Set of 5 aluminium plates, 60 x 25 mm.

• 51163 Set of 5 aluminium plates, 40 x 25 mm.

• 51410 Sample chucks.

• 50305 Motorised X-table.

• 50306 Manual X-table, movement displayed on the touch screen.

• 51610 Manual X-table.

• 51999 Laser to locate the cut.

• 51010 Base cabinet with layers and doors.

• 51620 Set of 3 filters for cooling tank.

Mecatome t330 Mecatome t330

Additional fittings

Kopal holders Quick clamping vices Screw clamping vices

51356 50906

PRE MECATOME T330 FR-GB-1304.indd 2-3 14/04/11 11:16

ww

w.p

resi

.com

ww

w.p

resi

.com

Cut-off machine designed for laboratory and production works.

4 exclusive cutting modes

ManualThe user chooses the speedof the cut-off wheel, whetherthe pump is to be used or not,and the type of control of thewheel speed. He can visualizein real time the wheel speedand the burden on the motor.

Assisted In this mode in particular,the user controls the feed speedof the table using the joystick and defines the maximum speed.This is manual cutting withoutany effort. The user can maintaina constant wheel speed or adjustthe speed according to the burden on the motor.

Automatic In this mode, the machineperforms the cut(s) automatically. The user can maintain a constantwheel speed or decide to adjust itaccording to the burden on the motor.If the pulsed cutting mode has been selected, cutting will be performed according to pause times specified by the user. All the control systems can be used at the same time.

Program The user performs the cuttingaccording to parameters previously defined in the programs.

Various clamping systems

Operation

• MECATOME T330 can be used to cut bars and large items. The motorized X axis (optional) allows serial cutting.

• The motor and the transmission to the cutting wheel have been optimized: ultra-resistant spindle, double row of bearings, V-ribbed belt, variable frequency control, etc. MECATOME T330 offers the best performance of all the cut-off machines in its category.

• The new step motors offer an incomparable positioning accuracy of the cutting table; the variable cut-off wheel speed from 1000 to 6000 rpm optimizes the cut through all types of materials.

• The Y and X tables (X table in option) can be guided directly by the joystick. The touch screen provides a number of exclusive advantages, including programming, indication of table movements, legibility and simplicity of use.

• The MECATOME T330 is equipped with a system for blocking the cut-off wheel, making the change of the wheel very quick and easy.

• The MECATOME T330 is spacious and integrates a large table with interchangeable stainless steel strips. Maintenance of the MECATOME T330 is particularly easy as well, thanks to its internal design and inbuilt cleaning kit. The grooved table is compatible with all commercially- available clamping systems.

• 51319 Quick clamping vice.

• 51321 Quick clamping vice.

• 51356 Quick clamping vice for long samples.

• 50906 Double quick clamping vices left and right (height: 45 mm).

• 50905 Left quick clamping vice.

• 50909 Right quick clamping vice.

• 50510 Double quick clamping vices left and right (height: 70 mm)

• 50902 Double screw clamping vices left and right.

• 50901 Left screw clamping vice.

• 50903 Right screw clamping vice.

• 50613 Box of Kopal holders.

• 50616 Kopal holder.

• 51156 Orientable chuck.

• 51713 Chuck for small samples (vice type).

• 51714 Chuck for cylindrical samples.

• 51716 Chuck for irregular shaped samples.

• 51715 V-shaped sample chuck.

• 51717 Vice chuck for longitudinal cuts.

• 51162 Set of 5 aluminium plates, 60 x 25 mm.

• 51163 Set of 5 aluminium plates, 40 x 25 mm.

• 51410 Sample chucks.

• 50305 Motorised X-table.

• 50306 Manual X-table, movement displayed on the touch screen.

• 51610 Manual X-table.

• 51999 Laser to locate the cut.

• 51010 Base cabinet with layers and doors.

• 51620 Set of 3 filters for cooling tank.

Mecatome t330 Mecatome t330

Additional fittings

Kopal holders Quick clamping vices Screw clamping vices

51356 50906

PRE MECATOME T330 FR-GB-1304.indd 2-3 14/04/11 11:16

ww

w.p

resi

.com

ww

w.p

resi

.com

LE CUBE MINITECH 233 MECATECH 334MECAPRESS 3MECATOME ST310

The best performance of all the cut-off machines in its category.Powerful: the MECATOME T330 is equipped with a 3.8 kW motor allowing the cutting of a large range of hard and soft materials.

Precise: the MECATOME T330 provides the highest level of precision thanks to its two positioning systems for Y and X axes with a 10 µm accuracy.

User-friendly: the MECATOME T330 is fully monitored by a touch screen and a highly sensitive joystick.

Reliable: the MECATOME T330 integrates oversized mechanical parts (spindles, bearings, guidance system, motor, etc) for an unequalled reliability.

Intelligent: the MECATOME T330 integrates three control systemsfor a perfect cutting every time: regulation of the cut-off wheel speed,regulation of the table feed according to the motor load and a pulsed cutting function.

Innovative: the MECATOME T330 is programmable and allows the memorizationof more than 100 processes protected by password.

Multi-purpose: the MECATOME T330 allows cutting in manual mode usingits swivel arm as well as in automatic mode using the motorized Y table.

Mecatome t330Precision cutting machine for laboratory and production works

Ref.

791

61 -

V1

- gi

nett

e by

atl

anti

c. P

hoto

s: P

RESI

.

38320 Brié-et-Angonnes - Grenoble - France. Tel.: +33 (0)4 76 72 00 21. Fax: +33 (0)4 76 72 05 84. E-mail: presi@presi.com F R A N C E S W I T Z E R L A N D S H A N G H A i H O N G K O N G

CUTTING

MOUNTING

POLISHING

HARDNESS AND MICROSCOPY

Automatic precision cutting machine Metallic hood transparent and secured Cutting methods manual, assisted, automatic or programmableCut-off wheel

Wheel material diamond or resinoidWheel diameter 250 or 300 mmRotational speed variable 1000 - 6000 rpmSpeed increments 1 rpmProgressive acceleration of the cut-off wheel Immediate stop of the cut-off wheel Direct cutting Pulsed cutting Shaft diameter 25,4 mmStainless steel flanges Ø 80 mmQuick change of the cut-off wheel

Cutting capacity Ø 110 mm or 95 x 150 mmPassage of bar on both sides of the machine Cutting table

Material anodised aluminium with interchangeable stainless steel stripsDimensions (W x D) 390 x 230 mmFeed speed 0.005 to 3 mm/secAutoregulation of the feed speed acc. to motor load Programmable cutting length Cutting length / stroke (Y axis) 0 - 240 mmPositioning accuracy Y axis 10 µmT-slots X & Y

Automatic X-table (option)Automatic positioning and serial cutting (option) stroke 0 - 100 mmPositioning accuracy X axis 10 µm

Control and setting of parametersControl with touch screen and highly sensitive joystick Programmable more than 100 programsProtection by password

Lighting of the cutting chamber Cooling and tank

External cooling tank 55 LFiltration system with removable and washable filter

Safety lock Spray nozzle for inside cleaning Emergency stop Power 3,8 kWElectrical supply 380V - 3 phases - 50/60 HzDimensions (W x D x H) 894 x 844 x 629Weight 190kgBuilt in compliance with CE standard Ref. 50300

Storage tower for consumables

Draining rack for platens Storage box Base cabinet for cut-off machine

Additional accessories

PResI, it’s also

Technical characteristics MeCATOMe T330

PRE MECATOME T330 FR-GB-1304.indd 4-1 14/04/11 11:15