ct 61 - ongear.hk · en 60335-1, en 60335-2-41. special features on request - other voltages. -...
TRANSCRIPT
169
Peripheral PumpCT 61CT 61
Coverage chart n ≈ 2900 rpm
19
ConstructionClose-coupled peripheral pump (regenerative pump) with
turbine impeller. Compact, patented construction with single-
piece motor casing and pump-side wall.
Protected against water entering the motor from outside.
CT: version with pump casing in cast iron.
B-CT: version with pump casing in bronze
(the pumps are supplied fully painted).
ApplicationsFor clean liquids without abrasives, without suspended solids,
non-explosive, non-aggressive for the pump materials.
For increasing network pressure (follow local specifications).
For the reduced dimensions, these pumps are very well suitable
to be mounted in cooling and air-conditioning machines and
equipments, circulation.
Operating conditionsLiquid temperature up to 60 °C.
Ambient temperature up to 40 °C.
Total suction lift up to 7 m.
Continuous duty.
Motor2-pole induction motor, 50 Hz (n ≈ 2900 rpm).
CT 61: three-phase 230/400 V ± 10%.
CTM 61: single-phase 230 V ± 10%, with thermal protector.
Capacitor inside the terminal box.
Insulation class F.
Protection IP 54.
Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
Special features on request- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- Special mechanical seal.
Materials
Components CT 61 B-CT 61
Pump casing Cast iron Bronze
GJL 200 EN 1561 G-Cu Sn 10 EN 1982
Casing cover motor side Brass P- Cu Zn Pb 2 UNI 5705
Impeller Brass P- Cu Zn Pb 2 UNI 5705
Shaft Chrome steel AISI 430
Mechanical seal Carbon - Ceramic - NBR
U.S. g.p.m.
Imp. g.p.m.
m ft
40
44
0
0
l/min m /h 3
72.865
0 0
40 2.6 1 2
30 20 10 0 0
10
20
30
2 4 6 8
2 4 6 8 10
100
60
40
20
120
140
H H
CTM 61 CT 61
Q
Performance n ≈ 2900 rpm
Dimensions and weights
Features
170
H Total head in m. P2 Rated motor power output.
Q3~ 230V 400V 1~ 230V P2 m3/h 0,48 0,6 0,75 0,96 1,2 1,5 1,89 2,3
A A A kW HP l/min 8 10 12,5 16 20 25 31,5 38
CT 611,9 1,1
CTM 612,5 0,33 0,45 H m 41 38,5 35,5 31 25,5 19 11 3
B-CT 61 B-CTM 61
CT 61 4,9 kg
CTM 61 5 kg
B-CT 61 5,1 kg
B-CTM 61 5,2 kg
108
G1 IS
O 22
8
G1 ISO 228
58
8 6390
22100122
22,5198
158
74.93.159
8096
40.5
Peripheral PumpCT 61CT 61
Patented4.94.160
171
Peripheral PumpCT 60CT 60
Coverage chart n ≈ 2900 rpm
19
ConstructionClose-coupled peripheral pump (regenerative pump) with
turbine impeller.
Compact, patented construction with single-piece motor casing
and pump-side wall.
Protected against water entering the motor from outside.
ApplicationsFor clean liquids without abrasives, without suspended solids,
non-explosive, non-aggressive for the pump materials.
For increasing network pressure (follow local specifications).
For the reduced dimensions, these pumps are very well suitable
to be mounted in cooling and air-conditioning machines and
equipments, circulation.
Operating conditionsLiquid temperature up to 60 °C.
Ambient temperature up to 40 °C.
Total suction lift up to 7 m.
Continuous duty.
Motor2-pole induction motor, 50 Hz (n ≈ 2900 rpm).
CT 60: three-phase 230/400 V ± 10%.
CTM 60: single-phase 230 V ± 10%, with thermal protector.
Capacitor inside the terminal box.
Insulation class F.
Protection IP 54.
Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
Special features on request- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- Special mechanical seal.
Materials
Components Materials
Pump casing Cast iron GJL 200 EN 1561
Casing cover motor side Brass P- Cu Zn Pb 2 UNI 5705
Impeller Brass P- Cu Zn Pb 2 UNI 5705
Shaft Chrome steel AISI 430
Mechanical seal Carbon - Ceramic - NBR
U.S. g.p.m.
Imp. g.p.m.
m ft
40
44
0
0
l/min m /h 3
72.865_12
0 0
40 2.6 1 2
30 20 10 0 0
10
20
30
2 4 6 8
2 4 6 8 10
100
60
40
20
120
140
H H
CTM 60CT 60
Q
Features
172
Peripheral PumpCT 60CT 60
Q3~ 230V 400V 1~ 230V P2 m3/h 0,48 0,6 0,75 0,96 1,2 1,5 1,89 2,3
A A A kW HP l/min 8 10 12,5 16 20 25 31,5 38
CT 60 1,9 1,1 CTM 60 2,5 0,33 0,45 H m 41 38,5 35,5 31 25,5 19 11 3
CT 60 4,9 kg
CTM 60 5 kg
4.93.528
7
96
80 40.5
G1
ISO
228
42
218
158
75
63 8
100
122
22
20
G1 ISO 228
4.93.529Patented
Performance n ≈ 2900 rpm
Dimensions and weights
H Total head in m. P2 Rated motor power output.
173
Peripheral PumpsT, TPT, TP
Coverage chart n ≈ 2900 rpm
20
ConstructionClose-coupled peripheral pumps (regenerative pumps) with
turbine impeller.
T, TP: version with pump casing and lanter bracket in cast iron.
B-T, B-TP: version with pump casing and lanter bracket in bronze
(the pumps are supplied fully painted).
ApplicationsFor clean liquids without abrasives, without suspended solids,
non-explosive, non-aggressive for the pump materials.
For increasing network pressure (follow local specifications).
For the reduced dimensions, these pumps are very well suitable
to be mounted in cooling and air-conditioning machines and
equipments, circulation, boiler feed.
Operating conditionsLiquid temperature from -10 °C to +90 °C.
Ambient temperature up to 40 °C.
Total suction lift up to 7 m.
Continuous duty.
Motor2-pole induction motor, 50 Hz (n ≈ 2900 rpm).
T, TP: three-phase 230/400 V ± 10% up to 3 kW;400/690 V ± 10% from 4 to 7,5 kW;
TM, TPM: single-phase 230 V ± 10% with thermal protector.
Capacitor inside the terminal box.
Insulation class F.
Protection IP 54.
Classification scheme IE2 for three-phase motors from 0,75 kW.Constructed in accordance with: EN 60034-1; EN 60034-30.
EN 60335-1, EN 60335-2-41.
Special features on request- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet).
- Protection IP 55.
- Special mechanical seal.
- Higher or lower liquid or ambient temperatures.
MaterialsComponents T, TP B-T, B-TP
Pump casing Cast iron BronzeLantern bracket GJL 200 EN 1561 G-Cu Sn 10 EN 1982
Casing cover Cast iron BronzeGJL 200 EN 1561 G-Cu Sn 10 EN 1982
Brass P- Cu Zn Pb 40 2 UNI 5705 for T 61-65-70, B-T 61-70
Impeller Brass P- Cu Zn 40 Pb 2 UNI 5705Bronze G-Cu Sn 10 EN 1982 for T 125, TP 132-132R
Shaft Cr-Ni steel AISI 303T 76, Tp 80-100 Cr-Ni-Mo steel
Chrome steel AISI 430 AISI 316T 61-65-70-100-125, Tp 78-132-132R
Mechanical seal Carbon - Ceramic - NBR
0
0
m
Imp. g.p.m.
m /hl/min
ft
0
01 2 3 4 5 6
100
0
40
80
120
160
5 10 15 20
20 40 60 80
100
200
300
400
500H
Q3
72.853
T 61
TP 100
TP 132
TP 78
TP 80
T 100
T 125
TP 132R
T 76
T 70T 65
0 5U.S. g.p.m. 10 15 20 25
Performance n ≈ 2900 rpm
Dimensions and weights
174
P2 Rated motor power output.
H Total head in m.B-T, B-TM = Bronze construction.P1 Maximum power input. * Maximum suction lift 2-3 m.
Peripheral PumpsT, TPT, TP
Qm3/h 0,06 0,12 0,24 0,38 0,48 0,6 0,75 1 1,2 1,5 1,89 2,4 3 3,6 4,2 4,8 5,4 6
Qm3/h
l/min 1 2 4 6,3 8 10 12,5 16 20 25 31,5 40 50 60 70 80 90 100
B- T 61E 1,9 1,1 B- TM 61E 2,5 0,55 0,33 0,45 38 36 34 31,5 28 24 19 12,5 5
B- T 65E 2,8 1,6 B- TM 65E 3,5 0,8 0,45 0,6 44 42 40 37 33 29 24 16 8
B- T 70/A 3,7 2,2 B- TM 70/A 6 1,3 0,75 1 59 57 55 51 48 43 38 30 22 10
T 76E 5,3 3 TM 76E 7,4 1,6 1,1 1,5 70 68 67 65 62 58 53 46 38 26
T 100/A 11,5 6,6 3 4 103 97 89 82 75 68
T 125/A 9,6 4 5,5 125 110 90 75* 60*
B- TP 78/A 2,3 1,3 B- TPM 78/A 2,8 0,6 0,37 0,5 75 70 60 50 42 35 25 15
B- TP 80E 3,3 1,9 B- TPM 80E 5,8 1,2 0,75 1 90 85 79 73 61 48 34 20
TP 100/A 9,6 5,5 2,2 3 160 157 151 140 129 115 99 82
TP 132R/A 10,9 5,5 7,5 145 135 120 110 95 70
P2
kW HP
1 ~ 230V P1
A kW
3 ~ 230V 400V
A A
TP 132/A 14,3 7,5 10
Hm
165 143* 120*
T 61E: kg 6,3B- T 61E: kg 6,5
T 65E: kg 7,3B- T 65 : kg 7,5
kg
T, TP B-TP
TYPEDN1 DN2
T 125/A –
T 76E –
T 100/A –
G 11/4 G 11/4 32 470 90 155 170 226 152 125 180 140 40 9,5 - 90
a f h1 h2 h3 h4 m1 m2 n1 n2 b s l1 l2 w g
195 12 39,5 -
G 11/4 G 11/4 26 338 80 112 136 203 117 100 155 125 30 9 - 80 105 10 18,4 -
G 11/4 G 11/4 32 410 90 130 161 226 152 125 180 140 40 9,5 - 95 121 12 32,5 -
mm
TP 80E B-TP 80E G 3/4 G 3/4 27 332 80 90 135 203 117 100 155 125 30 9 - 60 104 10 16,4 16,8
TP 100/A – G 3/4 G 3/4 27 387 80 100 142 203 117 100 155 125 30 9 - 65 113 10 23,2 -
TP 132R/A –TP 132/A –
G 11/4 G 11/4 42 485 112 160 202 272 180 140 230 190 50 11,5 - 100 183 1453,658,5
--
ISO 228
DN2a
ws 4.93.093
h4
f
m2m1
bn2n1
g h1
DN2DN1
h3
l2
h2
244
G1 ISO 228
24
160
80 80
96
108
G1ISO 228 ISO 228
58
G1
122
100
22
8
90
63
74.93.227 4.93.218
DN2a
f
790106
9322
112134
10 71
h2
l2
h3
DN2
DN1
182
DN1 DN2 mm kgTYPE
ISO 228 a f h2 h3 l2 T B-T
T 70/A B-T 70/A G 1 G 1 24 278 100 121 63 11,2 11,6
TP 78/A B-TP 78/A G 1/2 G 1/2 22 276 80 127 56 8,2 8,8
175
Characteristic curves n ≈ 2900 rpm
20
0 0.5 1 1.5 2 2.5
0 2 4 6 8 10U.S. g.p.m.
0 8 12 16 20 24 28 32 36 40
0 0.1 0.2 0.3 0.4 0.5 0.6
0
10
20
30
40
50
0
20
40
60
80
100
120
140
160
H ft
0
0.1
0.2
0.3
0.4
00.10.20.30.40.5
P HP
1 2 3 4 5 6
3
8
13
18
NPSH
ft
0 0.5 1 1.5 2 2.5
0 1 2 3
0 4 8 12U.S. g.p.m.
0 10 20 30 40 50
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
0
10
20
30
40
50
0
20
40
60
80
100
120
140
160
180
H ft
0
0.2
0.4
0.6
0
0.2
0.4
0.6
0.8
P HP
0
2
4
6
8
0 510152025
NPSH
ft
0 1 2 3
0 1 2 3 4
0 4 8 12 16U.S. g.p.m.
0 10 20 30 40 50 60
0 0.2 0.4 0.6 0.8 1
0
10
20
30
40
50
60
70
0
100
200
H ft
0
0.2
0.4
0.6
0.8
1.0
00.20.40.60.81.01.2
P HP
0 1 2 3 4 5
0
5
10
15
NPSH
ft
0 1 2 3 4
0 1 2 3 4
0 4 6 8 10 12 14 16U.S. g.p.m.
0 10 20 30 40 50 60
0 0.2 0.4 0.6 0.8 1
0
20
40
60
80
0
100
200
H ft
0
0.4
0.8
1.2
1.6
0
1
2
P HP
0
1
2
3
4
0
5
10
NPSH
ft
0 1 2 3 4
Ø 60 Ø 65
Ø 71 Ø 76
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h372.136 72.137
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3 72.139
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3 72.138
T 61ET 65E
T 70/A T 76E
Peripheral PumpsT, TPT, TP
176
Characteristic curves n ≈ 2900 rpm
0 0.2 0.4 0.6 0.8 1
0 1 1.5 2 2.5 3 3.5 4 4.5 5U.S. g.p.m.
0 4 6 8 10 12 14 16 18 20
0 0.1 0.2 0.3
0
20
40
60
80
100
0
40
80
120
160
200
240
280
320
H ft
0
0.1
0.2
0.3
0.4
0.5
00.10.20.30.40.50.6
P HP
0 1 2 3 4 5
0
5
10
15
NPSH
ft
0 0.2 0.4 0.6 0.8 1
1.2
1.2
0 0.5 1 1.5 2
0 2 3 4 5 6 7 8U.S. g.p.m.
0 5 10 15 20 25 30
0 0.1 0.2 0.3 0.4 0.5
20
40
60
80
100
120
100
200
300
380
H ft
0
0.2
0.4
0.6
0.8
1.0
00.20.40.60.81.01.2
P HP
0 1 2 3 4 5
0
4
8
12
16
NPSH
ft
0 0.5 1 1.5 2
0 0.5 1 1.5 2 2.5
0 2 4 6 8 10U.S. g.p.m.
0 10 20 30 40
0 0.1 0.2 0.3 0.4 0.5 0.6
60
100
150
200
200
300
400
500
600
H ft
1
2
3
1.52.02.53.03.54.0
P HP
0
2
4
6
0 5101520
NPSH
ft
0 0.5 1 1.5 2 2.5
0 1 2 3 4 5
0 4 6 8 10 12 14 16 18 20 22U.S. g.p.m.
0 20 30 40 50 60 70 80
0 0.2 0.4 0.6 0.8 1 1.2
60
70
80
90
100
110
120
130
200
300
400
H ft
2
3
4
5
4
6
P HP
2
3
4
5
6 8 10 12 14
NPSH
ft
0 1 2 3 4 5
5
3
Ø 100
Ø80 Ø 80
Ø 100
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h372.145 72.141
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3 72.140
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3 72.142
TP 78/A TP 80E
TP 100/A T 100/A
Peripheral PumpsT, TPT, TP
177
Characteristic curves n ≈ 2900 rpm
20
0 1 2 3 4 5
0 4 8 12 16 20U.S. g.p.m.
0 20 30 40 50 60 70 80
0 0.2 0.4 0.6 0.8 1 1.2
50
100
150
200
200
300
400
500
600
H ft
2
3
4
5
6
7
4
6
8
P HP
2
4
6
8
10
10
20
30
NPSH
ft
0 1 2 3 4 5
0 1 2 3 4 5 6 7
0 10 20 30U.S. g.p.m.
0 20 40 60 80 100
0 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
60
100
200
300
400
200
500
1000
1300
H ft
P HP
0 2 4 6 8 10
0
10
20
30
NPSH
ft
0 1 2 3 4 5 6 7
0
10
16
048121620
Ø 124
TP 132/A Ø 132
TP 132/A
TP 132R/A Ø 126
TP 132R/A
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h3
Q m /h3
l/minl/s
H m
P kW
NPSH
m
Q m /h372.143 72.144
T 125/A TP 132/ATP 132R/A
Peripheral PumpsT, TPT, TP
178
Features
RangeThe high number of pumps in the range can meet the widest range of servicesrequired by the user.
FlexibleThe option to choose between cast iron and bronze materias for the hydraulicparts in contact with the pumped liquid allows T-TP series pumps to be selectedfor use with different types of liquids.
ReliableThe bearing and shaft are designed to ensure the reduction of the stress, provi-ding high reliability under all operating conditions.
Optimized hydraulicsThe pump hydraulics are designed to ensure high performance and consistencyof performance.
Peripheral PumpsT, TPT, TP