create a valve
TRANSCRIPT
-
8/9/2019 Create a Valve
1/15
MODELLING GLOBE VALVE.
NomSize
A B C D E F G H L
100 480 250 32 875 140 675 50 360 30
150 520 318 37 900 175 700 55 370 34200 560 381 42 925 200 725 60 380 38
GLOBE VALVE 300#
PARA 1=NOM SIZE DN 100PARA 2=CONNECTION FBBPARA 3= A (LENGTH) 480PARA 4= B (FLG DIAM) 254PARA 5=C (FLG THK) 32PARA 6=D (HEIGTH) 875
-
8/9/2019 Create a Valve
2/15
Paragon
-
8/9/2019 Create a Valve
3/15
Fill as indicated.
First fill the name of Ppoint Set :/VGL300#PS
Then fill the name of Geom Set:
/VGL300#GS
Fill the parameter Description as indicated above and click in insert after everytime , at the endthe description appear under Description
APPLY
-
8/9/2019 Create a Valve
4/15
Create
-
8/9/2019 Create a Valve
5/15
Now well go to create the Ppoints.
P1
If theres an operation it must be between brackets
APPLYNow the first Ppoint is created
-
8/9/2019 Create a Valve
6/15
Now the P2
-
8/9/2019 Create a Valve
7/15
-
8/9/2019 Create a Valve
8/15
APPLY
Weve created the flangie
Now the other flangie
Now well create the body of valve.
The cilinder its created from the P1
-
8/9/2019 Create a Valve
9/15
Now its created the bottom of valve
-
8/9/2019 Create a Valve
10/15
Now a SNOUT
Now a cylinder
Now the handwheel
For create the hadnwheel its necessary to create a new Ppoint (P4),
Select the PTSE /VGL300#PS
-
8/9/2019 Create a Valve
11/15
Now a new Ppoint ( P5 )
-
8/9/2019 Create a Valve
12/15
Now the hadwheelGo to the GMSE
Again the other axis
For the circles of the hadwheel use 2 circular torus.For this reason its necessary to create 2 new Ppoints (P6 and P7), looking X
Navigate to PTSE and create two cartesian points .
-
8/9/2019 Create a Valve
13/15
Now P7
Now the geometryNavigate to GMSE
now the other half
-
8/9/2019 Create a Valve
14/15
Now the obstruction.
Select Obstruction volume.
--------------------------------------------------------------------------------------------------------------------
Now create the Description text:Navigate to CATECreate
-
8/9/2019 Create a Valve
15/15
Now for create the other components SCOM write the macro in a Text editor:----------------------------------------------------------------------------------------------------
NEW SCOM /VGL300#150 COPY /VGL300#100 PARA 150 FBB 520 318 37 900
NEW SCOM /VGL300#200 COPY /VGL300#100 PARA 200 FBB 560 381 42 925
Save it as VGL300.txtSelect the last SCOM created and run the macro.
Display