control systems product overview - power & control€¦ · product overview. ats controllers...

ControlSystemsProductOverview

ATS controllers

InteliATS NT STD and PWR models

are new controllers designed to

monitor the AC mains supply for

under/over voltage, under/over

frequency and voltage unbalance. frequency and voltage unbalance.

Any mains supply disproportion

causes the remote gen-set to start

and makes change over for both

generator and mains contactors.

The gen-set requires a remote start

type control unit (e.g. the ComAp

InteliLite NT MRS 10 controller).

Automatic transfer between mains and

generator power

On-site controller confi guration

Remote confi guration and monitoring

Inputs/outputs confi gurable for various Inputs/outputs confi gurable for various

customer needs

Mains measurements: U1-U3, Hz

Generator measurements: U1-U3, Hz

I1-I3, kVA, kW, kVAr, kWh (PWR)*

Active SMS/E-mails (PWR)*

Event based history fi le (PWR)*

InteliATS NT

STD, PWR

* Stated features available on this model

STD, PWR

Gen-set controllers

InteliLiteNT MRS models are

integrated controllers for single

engine control in Manual and

Remote Start applications,

featuring full gen-set monitoring

and protection.and protection.

The 4 MRS models are identifi ed

by a number which defi nes model

capability (10, 11, 15, 16).


InteliLiteNT AMF models are

integrated controllers for

gen-sets operating in single

standby mode. They meet all

possible requirements for AMF

applications, including modem applications, including modem

control, user confi guration and full

gen-set monitoring and protection.

The 2 AMF models are identifi ed

by a number which defi nes model

capability (20, 25).


MainsCompactNT is designed

for multiple (up to 31) gen-sets

controlled by InteliCompactNT and

operating in parallel to mains.

MainsCompactNT controller

connects the group of gen-sets to

the mains.

InteliCompactNT SPtM and MINT

models are new integrated

controllers for gen-sets operating

in both standby and parallel

modes. The controllers feature modes. The controllers feature

easy to use functionality,

confi guration and installation and

benefi t from a built-in synchronizer

and digital isochronous load

sharer. Native cooperation of up to

32 gen-sets is a standard feature.

Support of engines equipped with

ECU – J1939 interface (15, 16)*

Automatic/Manual start/stop of gen-set

Push buttons and LEDs for simple control

Parameters adjustable via keyboard or PC

3 phase Generator protections 3 phase Generator protections

Generator measurements (50 / 60 Hz):

U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh

Confi gurable programmable inputs

and outputs

Event based history fi le (15, 16)*

Web based monitoring and control

Wide range of remote communications

Support of engines equipped with

ECU – J1939 interface (25)*

Automatic/Manual start / stop of gen-set

Push buttons and LEDs for simple control

Parameters adjustable via keyboard or PC

Mains measurements (50 / 60 Hz): U1-U3, Hz Mains measurements (50 / 60 Hz): U1-U3, Hz

Generator measurements (50 / 60 Hz):

U1-U3, I1-I3, Hz, kVA, kW, kVAr, kWh

Confi gurable programmable inputs

and outputs

Event based history fi le (25)*

Web based monitoring and control

Wide range of remote communications

Mains measurements: U, I, Hz, kW, kVAr,

kVA, PF, kWh, kVAhr

Bus measurements: U, I, Hz

Mains failure detection using integrated

mains protections

Systems with as well as without master

generator breaker supported

Confi gurable level switches based on mains

import or object consumption

Event based history fi le

AMF, continuous parallel function

Peak shaving, Mains export/import

Support of engines equipped with ECU

(J1939, Modbus and other proprietary

protocols); alarm codes displayed in protocols); alarm codes displayed in

text form

Baseload, Load sharing

Optimizing the running of each engine in

multi-gen-set mode

Inputs/outputs confi gurable for various

customer needs


InteliLite NT AMF

MainsCompact NT

InteliCompact NT

SPtM, MINT

InteliLite NT MRS

AMF

MRS

Gen-set controllers

InteliSysNT is an expandable NT is an expandable NT

controller for both single and

multiple gen-sets operating

in standby or parallel modes,

especially in CHP (cogeneration)

and other complex applications.

Detachable construction (consisting

of IS-NT-BB and IS-Display or

InteliVision) allows easy installation

with the potential for many

different extension modules different extension modules

designed to suit individual

customer requirements.

CHP support (programmable PID loops and

other built-in PLC functions)



protocols); alarm codes displayed in

text form

Baseload, Import/Export, TempByPower,

Peak shaving, Voltage and PF control


multi-gen-set mode


customer needs

Event based history fi le with up to

1000 records

InteliSys NT

Generator controllers

InteliGenNT GeCon provides

comprehensive generator

protection and control for single

or multiple gen-sets equipped

with an independent engine

controller. Special confi gurations

optimized for use in marine and

land-based installations allow land-based installations allow

customers to select a tailored

solution for their application with

the option of modifi ed options for

critical applications.

GeCon only controls generator part of a

gen-set since the engine control is provided

by an engine controller

Two GeCon controllers can be used in

either Master & Hot-Standby or Master &

Protection applications

Cooperation with the engine controller is

achieved using minimum inputs and outputs achieved using minimum inputs and outputs

Accepts external automatic or manual control

of both engine and breaker

Baseload, Import/Export, Analog external

load control


multi-gen-set mode

Event based history fi le with up to 500 records

InteliGen NT GeCon

InteliMainsNT is designed for

multiple (up to 31) gen-sets

operating in parallel to mains.

InteliMains controller connects

the group of gen-sets to the

mains. It can serve as a bus-tie mains. It can serve as a bus-tie

synchronizing controller between

two groups of gen-sets.

Mains measurements: U, I, Hz, kW, kVAr,

kVA, PF, kWh, kVAhr

Bus measurements: U, I, Hz

Mains failure detection using integrated

mains protections

Bus-tie application Bus-tie application

Selectable partial or full MCB control

Confi gurable level switches based on mains

import or object consumption


InteliMains NT

InteliGenNT is a comprehensive NT is a comprehensive NT

controller for both single and

multiple gen-sets operating

in standby or parallel modes.

Compact construction is optimized

for these purposes; various HW

modifi cations allow the customer

to select the optimum type for a

particular application.

AMF, continuous parallel function



protocols); alarm codes displayed in

text form

Baseload, Import/Export, Peak shaving,

Voltage and PF control


multi-gen-set mode


customer needs

Event based history fi le with up to

500 records

Integrated PLC programmable functions

InteliGen NT

Engine controllers

Off-road machinery controllers

InteliDrive DCU Industrial is a highly fl exible sophisticated engine controller, which

features outstanding control, monitoring and protection for both mechanical and

electronic diesel / gas engines as well as peripheral equipment. Industrial software

contains a set of programmable functions like comparators, timers, PID loops, logic

functions and others for easy solution of any industrial application.

InteliDrive Lite is a cost effective sophisticated engine controller, which

features outstanding control, monitoring and protection for both mechanical

and electronic diesel / gas engines in one unit. The extended product family

offers a range of engine specifi c versions suitable for land-based and marine

non-classifi ed applications.

InteliDrive Mobile is a highly fl exible sophisticated mobile electronic controller,

which features outstanding control, monitoring and protection for diesel and

gas engines as well as driven technology. The controller offers a range of

specifi c functions suitable for mobile applications as hydraulic system control,

communication with sensors and operational devices control.

InteliDrive DCU Marine is an engine controller designed specially to meet the

demanding needs of the marine market; providing a high level of performance

coupled with extensive J1939/J1587 communication capabilities and incorporating

hardwired safety functions and primary/secondary power switching.

Engine sequencing and control

J1939 interface supporting wide range of EFI engines

Engine monitoring and protections

Integrated PLC

Speed measurement from magnetic pick-up or from J1939

Running hours meter, number of starts counter

14 binary inputs, 14 binary outputs, 8 analog inputs

Input/output confi guration

Setpoints adjustable via keyboard or PC

Recommended extension: ID-SCM, ID-SCM1

Engine control, monitoring and protection


Speed measurement from pickup or from J1939

6 confi gurable binary inputs and outputs, 3 cofi gurable analog inputs

Support of plug-in modules: IL-NT AIO, IL-NT AOUT8, IL-NT BIO8, IL-NT IO1

PLC functions: PID loop, Comparators, Timers


Password protection

Engine control, monitoring and protections

Integrated PLC for driven technology control


Internal GSM modem and GPS location

Confi gurable 16 binary inputs, 16 binary outputs, 8 analog inputs,

8 analog in (or) outputs for hydraulic proportional valves

Operating temperature: -25°C to +70°C (optionally -40°C to +85°C)

Enclosure IP67

Anti condensation (Gore Membrane Venting)

Engine sequencing and control

Engine monitoring and protection

Confi gurable J1939 interface with electronic engines including ECU

Alarm indication

Redundant module ID-RPU with hardwired safety functions activated in

backup mode

Automatic switchover to backup mode in case of detection of main unit failure


Recommended extension: ID-RPU

InteliDrive DCU Industrial

InteliDrive Lite

InteliDrive Mobile

InteliDrive DCU Marine

Accessories

E X T E N S I O N M O D U L E S IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

I-AOUT8 ANALOG OUTPUT EXTENSION MODULE

ID-RPU REDUNDANT PROTECTION UNIT

ID-SCM SPEED CONTROL MODULE

IG-IOM ANALOG/BINARY INPUT/OUTPUT MODULE

IGL-RA15 REMOTE ANNUNCIATOR

IGS-PTM ANALOG/BINARY INPUT/OUTPUT MODULE

IL-NT AIO ANALOG INPUT/OUTPUT MODULE

IL-NT AOUT8 ANALOG OUTPUTS FOR PWM GAUGES MODULE

IL-NT BIO8 BINARY INPUT/OUTPUT (PWM) MODULE

IL-NT IO1 ANALOG INPUT/OUTPUT MODULE

IS-AIN8 ANALOG INPUT MODULE

IS-BIN16/8 BINARY INPUT/OUTPUT MODULE

NT-Converter LOAD SHARING INTERFACE MODULE

C O M M U N I C A T I O N M O D U L E S IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

IB-Lite ETHERNET MODULE

I-CR CAN REPEATER MODULE

ID-COM COMMUNICATION MODULE

IG-IB INTERNET BRIDGE

I-LB+ LOCAL BRIDGE

IL-NT RS232 RS232 EXTENSION BOARD

IL-NT RS232-485 DUAL PORT EXTENSION BOARD

IL-NT S-USB PLUG-IN SERVICE USB MODULE

E C U C O M M U N I C A T I O N M O D U L E S IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

I-CB ECU COMMUNICATION BRIDGE

R E M O T E D I S P L AY S IG-NT IS-NT IM-NT ID

IG-Display LT GC ADDITIONAL REMOTE DISPLAY

InteliVision CONTROLLER COLOUR DISPLAY UNIT

I-RD-CAN REMOTE DISPLAY WITH CAN BUS INTERFACE

IS-Display DETACHABLE DISPLAY MODULE

S I M U L A T O R S IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

MultiKit SIMULATOR OF VARIOUS APPLICATIONS

StarterKit PORTABLE SIMULATOR

A D D I T I O N A L M O D U L E S IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

IG-AVRi AVR INTERFACE

I-LBA LOW BATTERY ADAPTOR

I-RB 8 OR 16 RELAYS BOARD

Mains protections

3-phase mains protection

Vector shift protection

2 stage over/under frequency protections

2 stage over/under voltage protections

Voltage asymmetry protections

Meets applicable Meets applicable

requirements of

IEC 60255

Designed with the aim

of satisfying the G59,

ETR113, G77, G83 and

G10 guidelines

NPU-FUV

PC tools

M O N I T O R I N G S W IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

DriveMonitorPC MONITORING TOOL

InteliMonitorPC MONITORING TOOL

InteliSupervisorPC TOOL FOR GEN-SET FLEET MANAGEMENT

WinScopeSPECIAL GRAPHICAL CONTROLLERS‘ MONITORING SOFTWARE

C O N F I G U R A T I O N S W IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

DriveConfi gPC CONFIGURATION TOOL

GenConfi gPC CONFIGURATION TOOL

C O N F I G U R A T I O N A N D M O N I T O R I N G S W IA-NT IL-NT IC-NT MC-NT IG-NT/IS-NT IM-NT ID-Lite ID

LiteEditPC CONFIGURATION AND MONITORING TOOL

Integrated protection solution for generators operating in

parallel to mains applications

InteliProtec

2 stage over/under voltage protections

2 stage over/under frequency protections

Vector shift

Rate of change of frequency Rate of change of frequency Rate of change of frequency Rate of change of frequency

Over current, NVD

Reverse power

Earth fault protections

Short term parallel

protection

Satisfi es G59 guidelines

Full name Short name Pictogram

InteliATSNT IA-NT

InteliLiteNT IL-NT

InteliCompactNT IC-NT

MainsCompactNT MC-NT

InteliGenNT IG-NT

InteliSysNT IS-NT

InteliGenNT and InteliSysNT IG-NT/IS-NT

InteliMainsNT IM-NT

InteliDrive Lite ID-Lite

InteliDrive ID

InteliVision IV —

These pictograms are designed to help you visually associate which Accessories and PC tools are suitable for use with which controllers.

We have also provided both the full product names and their abbreviated shorter names to help you recognize and identify the products more easily.

If you look throughout the overview you will see these icons appearing next to the relevant or associated product.

Pictograms and short names

PLC EditorNew configuration tool for selected ComAp controllers

Key features of new releaseKey features of new release

PLC functions can be moved both horizontally PLC functions can be moved both horizontally and vertically

Colour-coded and linked to relevant functions

Blocks can be organized to refl ect the real process fl ow

Groups of blocks can be separated on each sheet to form sub-sets within the design

Detailed descriptions of inputs and outputs come complete with useful hints

The new ComAp PLC Editor is currently free to users who complete a short questionnaire on the ComAp website www.comap.cz allowing user analysis to be reviewed.

For more information visit www.comap.cz

InteliVision is a new generation color display unit for either InteliGendisplay unit for either InteliGenNT, InteliSysNT, InteliSysNT NT,

InteliMainsNT or InteliDrive controllers. It is designed as a simple, easy to use Plug and designed as a simple, easy to use Plug and

Play solution, which also features our unique Play solution, which also features our unique TRENDS monitoring as a standard feature.

www.comap.cz/intelivision

The interactive simulator provides a taste of the new InteliVision, with demo and preview options illustrating screen information and function.

simulator

ONLINE

© ComAp. 2009-11/CPLEPROV. All rights reserved.

Specifi cations in this material are subject to change without notice.

Manufacturer Local Distributor / Partner

ComAp, spol. s r. o.Czech Republic

Phone: + 420 246 012 111Fax: + 420 266 316 647E-mail: [email protected]

Internet: www.comap.cz

www.comap.czSpecial Controllers‘ Monitoring Software from ComAp

Cabo Corrientes and Puerto Madryn, Argentina

The Argentinian Coast Guard vessels GC 73 Cabo Corrientes and GC 78 Puerto Madryn are both equipped with ComAp generator and propulsion engine control and monitoring systems.

The onboard generators powered by Perkins engines use InteliGenNT Marine, whilst the ship’s MTU propulsion engines rely on two InteliDrive DCU Marine and additional modules to provide a control package which includes controlling engine speed and gear box. The complete system is easily managed using two full colour InteliVision and IG-Display units.

Power plant, Switzerland

The power plant stands in the built-up area “Am Mark” in Heerbrugg and provides power for the nearby residential apartments and a large shopping centre.

The plant features an Olympian GEP400-2 diesel gen-set producing 400 kVA with control and monitoring from ComAp using InteliGenNT unit in MINT application with two InteliMainsNT units in MGCB application.

Boss Industries, USA

“ComAp’s compressor and engine control panel solution optimizes natural gas production on Boss’s booster units by providing accurate process control using digital pressure transducers.

Our customers are very happy with its event history capabilities as well as its compressor and engine protective features. We also value the fact that the ComAp ID-DCU panel is fully compatible with future electronic emission certifi ed engines and control capabilities. BOSS Industries has standardized on the ComAp panel for our gas well booster compressor units.“

Ed Ketcham, VP Saleswww.bossair.com

Free

Download

Power plant, Switzerland

Boss Industries, USA

Cabo Corrientes and Puerto Madryn, Argentina

control systems product overview - power & control€¦ · product overview. ats controllers...

Documents