Solution example

Contact-free detection of defects in lithium-ion batteries, food and medical packaging●Contact-free testing machine operating via

ultrasonic wave transmission●Non-destructive, contact-free, dry inspection●Able to clearly detect air bubbles and peeling

that are poorly detectable by X-ray testing

SST-304 series

g

Contact-freeUltrasonic tester

Allows for testing for residual air bubbles within the pouch and impregnation testing. Allows for quantitative testing by threshold.

Residual gas

By using focusing calibration techniques of a chosen layer, it is possible to acquire a tomographic image and perform defect depth analysis.

Detects signal deterioration using high-speed circumference scan.

Detects trapping of foreign matter in aluminum laminate films consisting of 4 thermally bonded A4 size edges

Aluminum laminate adhesion testing example

Signal change due to resin hardening

φ5, 3, 1 defect inside CFRP

Defect NG evaluation Detailed scanning of defective parts

■Top view

■

■

Composite material (CFRP) testing

Resin hardness measurement ■

■

Surface shape measurement using reflection

CFRP and steel plate bonding testing

■Side view

Bonded with lubricant

Film(0.2mm)Space

(0.1mm) Acrylic resin(3mm)Film(0.2mm)

1.5mm

2.0mm

2.5mm

2nd one front1st one front

1st one reverse

2nd one reverse

hour

0.6

0.8

1

1.2

1.4

1.6

1.8

2

100000

10000

1000

100

10

Out

put

Stor

age

mod

ulus

(Pa)

0 1 2 3 4 5 6

Dynamic viscoelasticity measurement resultsMeasurement data

Packaging laminate defect testing CFRP/composite material defect testing

Defect depth evaluationLithium-ion battery porosity testing

TypeScaning rangeDrive(Drive option)

DisplayDataWeightPower voltage, power supplyAirUsage temperature

Production specificationExternal dimensions

Notice : Please note that specifications are subject to change without notice.

SST-304322(W) x 230(D)mmAC servo motor 4 axisRotation measurement unit( servo motor 1 axis)18.5-inch wide LCDHDD450kgAC100V~220V, 50/60Hz, 1kVAUnused5~40°C

SST-304 Stand-alone / general-purpose type

Notice : Please note that specifications are subject to change without notice.

TypeScaning rangeDriveDisplayDataWeightPower voltage, power supplyAirUsage temperatureAutomatic test

Production specificationExternal dimensionsSST-304C400(W) x 280(D)mmAC servo motor 4 axis24-inch LCDHDD600kgAC100V~220V, 50Hz, 1kVAUnused5~40°CCommunication with the host computer via an external IO terminalBarcode acquisition, storage of resultsA wide variety of models supported through model registration

SST-304C Fully automatic / conveyor feed type

Website Inquiry

283, Aoya-cho, Minami-ku, Hamamatsu, 435-8568, JapanTEL +81-53-467-3601 FAX +81-53-467-3613

FA Division Sales section

URL : http://www.yamahafinetech.co.jp/en/

1050

(con

veye

r)( 1

630)

1275

850

1275

( 171

4)

1000

SST-304 series

Ultrasonic testerContact-free