Patron Prof. V.K.Tyagi, Director, BIET, Jhansi Conference Chair/Coordinator Dr. Hiwarkar A.D., H.O.D, Chemical engg Department, BIET, Jhansi

Co-coordinator

Dr.Sudeep Yadav, Assistant Professor, Dept of

Chemical Engineering, Dr. T.P.Singh, Assistant

Professor,Dept of Chemical Engineering

Advisory Committee Prof. R.S.Singh (IIT,BHU), Prof. B.N.Rai (IIT,BHU), Prof. S.P.Chaurasia (MNIT, Jaipur), Prof. I.D.Mall (IIT,Roorkee), Prof .Shishir Sinha (IIT,Roorkee), Dr.V.C.Srivastava (IIT,Roorkee) Advisory Committee(Institute)

Prof. A.K.Solanki,Head CS & IT dept., Dr.A.K.Nigam,coordinator TEQIP-III, Dr.Mukesh Shukla,Head CE dept., Dr.D.C.Dubkarya,head EC&EE dept. ,Dr.Sanjay Agarwal,Dean Academics, Dr.Vikram Singh Yadav,Head AS dept., Dr.Tarun Soota,Head ME dept.

Accommodation Participants have to make their own

arrangements for travel. Limited accommodation

facility may be arranged on request in advance in

the Institute hostel. Location The city of Jhansi is well connected to all parts of

the country by road and rail. It is en-route Delhi-

Mumbai main line of North-Eastern railway.

Nesting amidst greenery on all sides, BIET

campus is approximately 12 Km from Jhansi

Railway station. The nearest Airports are Gwalior

& Agra, which are well connected by trains.

REGISTRATION FORM National Conference on

Recent trends in Chemical Engineering

&Environment Protection March 23-24, 2018

1. Name:……………………………………………………

2. Designation:……………………………………………

3. Gender:……………………………………....…………

4. Category: ……………………….......……………….

5. Organization: …………………………………………

6. Higher Academic Qualification:……………….....

7. PaperID: ………………………………………………

8. Title of the Paper: ……………………………………

………………………………………………………………

9. Address of correspondence: …………………....

………………………………………………………………

10. Phone No.: ……………………………………………..

11. Email: .............…………………………………………

12. Accommodation Required (YES/NO): …………

13. Payment Detail(Bank Draft No.):....................... Amount: …………………….................. Name of Bank/Drawn date: ………………………. Date:

Place: Signature of the participant

Under the aegis

Of

World Bank (TEQIP-III)

National Conference On

Recent trends in Chemical Engineering & Environment

Protection

March 23-24, 2018

Organised by

Department of Chemical Engineering

Bundelkhand Institute of Engineering

&Technology, Jhansi, 284128 (U.P.)

(An autonomous institute)

Telephone: +91 510 232 0349 www.bietjhs.ac.in

Purpose Over the past few decades the world is witnessing the impact of technological advancement in the field of Chemical Engineering. To take full advantage of such development, it is necessary to bring together science & technology professionals, researchers, academicians industry people and valued users on a common platform. It is a timely endeavor indeed because Chemical Engineering is breaking news in the world of science and Technology. The conference will provide opportunities to understand technical challenges and best practices for untapped huge environmental protection strategies in Indian context along with the fundamentals of chemical engineering.

About Bundelkhand Institute of Engineering & Technology Bundelkhand Institute of Engineering & Technology (BIET), Jhansi was founded in year 1986. It is a prestigious Institute with a reputation for excellence at both undergraduate & postgraduate level, fostering the spirit of nation integration among the Institute, close interaction with industry and a strong emphasis from research both basic and applied. About chemical engineering department

The chemical engineering department was

established in 1996 & M.Tech (Energy Science &

Technology) in 2014. Its courses include all

important aspects of chemical engineering with

more emphasis on analysis and implementation of

various types of technologies and development.

Department has fully equipped laboratories to

facilitate students to improve their practical

knowledge in different subjects. We try to insist

value through courses, activities, events and

environment created in department.

well equipped laboratories and departmental library.

Course content The topics to be covered included but are not limited to:

Air pollution control and equipment, Bio fuel, Clean Coal Technology, Ecology and Biodiversity Conservation Economic and Social aspect of Sustainable Development, Ecosystem Restoration

Environmental Science and Technology, Solid waste Management, Sustainable Development and Education

Water pollution and treatment, Advanced Energy Technologies

Renewable energy technologies, Renewable sources of energy

Chemical, Environmental, and Process Engineering Environmental engineering

Recent development in Waste water treatment methods

Chemistry and Chemical Engineering Fundamentals

Submission

Full text Manuscript in specified template should be submitted by one of the authors of the manuscript either through email to bietjhs.ch@gmail.com(*.pdf)/Word(*.doc/*.docx) files in specified format shall be considered for review. The corresponding author must submit duly signed copyright form. Specified format of paper and copyright form is available on conference website. All the accepted and presented papers will be published in conference proceedings. The authors will take the sole responsibility for all the issues related to plagiarism, if any. Eligibility & Registration fee: The conference is interdisciplinary in nature and is open to faculty members, PhD research scholars, and industry personnel of Chemical Engg. & its related branches, Mechanical Engg., Civil Engg., Biotechnology, Applied Science & Humanities, Electrical Engineering. The participants must be sponsored by their institutions. Other interested persons may apply. Registration of delegates should be made

be made in advance along by remitting the registration fee along with the registration details as indicated below:

Students/ Research Scholars: Rs. 1000/-

Academician: Rs.1500/-

Industry persons: Rs.2000/-

Mode of application:

Brochure with application form is available for download at Institute website. Registration fee is to be paid via DD favoring Director BIET Jhansi Payable at Jhansi should be sent along with duly completed registration form to bietjhs.ch@gmail.com

Important Dates Full Length Paper Submission: February,27,2018 Notification of Acceptance: March,6, 2018 Registration Deadline: March ,12,2018

Contact Details Dr. Hiwarkar A.D. Department of Chemical Engg. Bundelkhand Institute of Engineering &Technology, Jhansi, 284128(U.P.) Mob No. 9450077707 Email: bietjhs.ch@gmail.com

COPYRIGHT AGREEMENT

Please complete and sign the form and send it with the final version of your manuscript.

It is required to obtain written confirmation from authors in order to acquire copyrights

for papers published in the journal so as to index them to various repositories.

Title of paper:

________________________________________________________________________

________________________________________________________________________

________________________________________________________________________

Author(s):

________________________________________________________________________

________________________________________________________________________

_____________________________________________________________________

The undersigned hereby transfer any and all rights in and to the paper including without

limitation all copyrights to the……... The undersigned hereby represents and warrants

that the paper is original and that he/she is the author of the paper, except for material that

is clearly identified as to its original source, with permission notices from the copyright

owners where required. The undersigned represents that he/she has the power and

authority to make and execute this assignment.

This agreement is to be signed by at least one of the authors who have obtained the assent

of the co-author(s) where applicable.

______________________________________________________________

Author's Signature & Date

________________________________________________________

Typed or Printed Name

_____________________________________________________________

Institution or Company

Send to: bietjhs.ch@gmail.com

Paper Heading First Author

1, Second Author

2, Third Author

3

Affiliations of all authors mentioned in above

And e-mail ID also mentioned

ABSTRACT

This document gives formatting instructions for authors preparing papers for publication in the Recent Science Journals. The

authors must follow the instructions given in the document for the papers to be published. You can use this document as both an

instruction set and as a template into which you can type your own text. This document gives formatting instructions for authors

preparing papers for publication in the Recent Science Journals. The authors must follow the instructions given in the document for

the papers to be published. You can use this document as both an instruction set and as a template into which you can type your own

text. Use the word “Abstract” as the title, in 12-point Times New Roman (Italic), boldface type, left aligned as shown, initially

capitalized. The abstract is to be in 12-point, single-spaced type, and may be up to a 250 word length.

Keywords Include at least 5 to 6 keywords

(Abstract and keywords in one column format, and font format times new roman (Italic) and font size 10-point) full justify

I. INTRODUCTION

This document is a template. An electronic copy can be

downloaded from the Recent Science journals website. For

questions on paper guidelines, please contact

1. Page Layout

An easy way to comply with the Recent Science journal paper

formatting requirements is to use this document as a template

and simply type your text into it.

Your paper must use a page size corresponding to A4 which is

210mm (8.27") wide and 297mm (11.69") long. The page

margins can be set as moderate or set as follows:

Top = (2cm)

Bottom = (2cm)

Left = Right = (1cm)

Your paper must be in two column format with a size of

column of 3.38 mm (3.38”) column size with 0.25mm (0.25")

between columns. Spacing between lines in a paragraph is

1.05”. After each section one line space has to be left. Between the paragraphs 6 points space has to be left before

and after the paragraph.

2. Page Style

All paragraphs must be indented. All paragraphs must be

justified, i.e. both left-justified and right-justified.

(i). Text Font of Entire Document

The entire document should be in Times New Roman of font

size 10. Other font types may be used if needed for special

purposes.

Title and Author Details

Title must be in 22 pt Times new roman font Sentence case.

Author name must be in 12 pt regular Times new roman font.

Author affiliation must be in 10 pt regular. Email address

must be in 10 pt Times new roman Regular font.

Table. no

Font Sizes for Papers

Font

Size

Appearance (in Time New Roman )

Regular Bold Italic

10 table caption in

normal font

10 author email address

(in Times new

roman),

cell in a table

Abstract in

normal

letters 10

font times

new roman

(Italic)

abstract heading

bold 12 point

times new roman

12 level-1 heading 12

point bold times new

roman regular font

for paragraph

12 author name 12 point

times new roman

regular font

22 Paper Title 22 point

sentence case format

regular font,

centered

All titles and author’s details must be in single-column format

Every word in a title must be capitalized except for short

minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”,

“from”, “if”, “in”, “into”, “on”, “or”, “of”, “the”, “to”, “with”.

Author details must not show any professional title (e.g.

Professor), any academic title (e.g. Dr.) or any membership of

any professional organization.

To avoid confusion, the family name must be written as the

last part of each author name (e.g. Antony S Llyod).

Each affiliation must include, at the very least, the name of the

company and the name of the country where the author is

based (e.g. XXX Private Ltd, Netherlands).

Email address is compulsory for the corresponding author.

3 Section Headings

No more than 3 levels of headings should be used. All

headings must be in 12pt bold Times new roman font. Every

word in a heading must be capitalized except for short minor

words. Sub sections can be put in sentence case with font size

12 bold.

(i). Figures and Tables

Figures and tables must be centered in the columns. Large

figures and tables may span across both columns. Any table

or figure that takes up more than 1 column width must be

positioned either at the top or at the bottom of the page.

Graphics may be full color. Graphics must be drawn using

solid colors which contrast well both on screen and on a

black-and-white hardcopy. The caption of the graph must be

in 10 pt Times new roman regular font. Captions must be of a

single line must be centered whereas multi-line captions must

be justified. Captions with figure numbers must be placed

after their associated figures.

Please check all figures in your paper both on screen and on a

black-and-white hardcopy. When you check your paper on a

black-and-white hardcopy, please ensure that:

the colors used in each figure contrast well,

the image used in each figure is clear,

all text labels in each figure are legible.

a. Figure Captions

Figures must be numbered using numerals. Figure captions

must be in 10 pt Times new roman regular font. Captions must

of a single line must be left aliened whereas multi-line

captions must be justified. Captions with figure numbers must

be placed after their associated figures, as shown in Fig. 1.

Authors are advised not to include low resolution and poor

quality images, since it reduces the credibility of the journal.

Fig. 1: Example of a High definition image (left Align)

b. Table Captions

Tables must be numbered using numbers. Table captions must

be centred and in 10 pt Time new roman Regular font. Every

word in a table caption must be in regular font. Captions with

table numbers must be placed before their associated tables.

Tables should not be images. The contents of the table must

be in 10 point times new roman regular font.

c. Page Numbers, Headers and Footers

Page numbers, headers and footers must not be used.

d. Links and Bookmarks

All hypertext links and section bookmarks will be removed

from papers during the processing of papers for publication.

If you need to refer to an Internet email address or URL in

your paper, you must type out the address or URL fully in

Regular font.

4. CONCLUSIONS

This microsoft word template can be used for preparing the

paper.

5. ACKNOWLEDGEMENT

The heading of the Acknowledgment section and the

References section must not be numbered.

References (Should be one column)

The heading of the References section must not be numbered.

All reference items must be in 10 pt font. Please use Regular

and Italic styles to distinguish different fields as shown in the

References section. Number the reference items consecutively

in square brackets (e.g. [1]).

When referring to a reference item, please simply use the

reference number, as in [2]. Do not use “Ref. [3]” or

“Reference [3]” except at the beginning of a sentence, e.g.

“Reference [3] shows …”. Multiple references are each

numbered with separate brackets (e.g. [2], [3], [4]–[6]).

For Example:

[1] Misra and Kate N. Nagaraj,”Security in Wireless

Ad Hoc Networks”, in Book The Handbook of Ad-

Hoc Wireless Networks (Chapter 30), CRC Press

LLC, 2003.

[2] Midong Yhou, Zygmunt J. Hass, Securing Ad-Hoc

Networks, IEEE Networks Special Issue on Network

Security, November/December 1999.

[3] Data Integrity, from Wikipedia, the free

encyclopedia,[Online]http://en.wikipedia.org/wiki/D

ata_integrity.

[4] Z. Hu, C. Peter, S. Johnson, Ariadne: A Secure On-

demand Routing Protocol for Ad Hoc Networks, in

Proceedings of ACM MOBICOM’02, 1986.

[5] R. Sonzgiri, M. Dehill, V. P. Levine, C. Shields, E.

M. Belding-Royer,” A Secure Routing Protocol for

Ad-Hoc Networks, in Proceedings of ICNP’02,

1978.

[6] Y. Hu, A. Perrig, D. Johnson,”Packet Leashes: A

Defense against Wormhole Attacks in Wireless Ad-

Hoc Networks”, in Proceedings of IEEE

INFOCOM’03, 1965.

Author’s Profile and Image (Should be two

columns) In this last section, author’s add more professional

information about her/him self. And add passport size

image add with their profile.

For Example