comware v3 switch system log message
TRANSCRIPT
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page1, Total 176
Title: COMWARE V3 Switch System Log
Message
Authors: Platform MIB Team
Revision: 0.01
Creation Date: 14/02/2006 15:37
Modification Date: 25/03/2016
Abstract:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page2, Total 176
Title: COMWARE V3 Switch System Log Message ............................................ 1
i Revision History ........................................................................................................... 15
ii References .................................................................................................................. 15
Purpose ......................................................................................................................... 16
Introduction .................................................................................................................... 17
System Log Message Format ........................................................................................ 18
System Log Message Module List ................................................................................. 19
1 802.1X Messages .................................................................................................... 20
1.1 DOT1X_LOG ..................................................................................................... 20
2 ARP Messages ........................................................................................................ 20
2.1 DUPIP ............................................................................................................... 20
2.2 DUPIFIP ............................................................................................................ 21
2.3 DUPVRRPIP ...................................................................................................... 21
2.4 ARP TABLE FULL ............................................................................................. 22
3 CFAX Messages ..................................................................................................... 22
3.1 SENDFAIL ......................................................................................................... 22
3.2 TIMEOUT .......................................................................................................... 23
3.3 PROCINFO ........................................................................................................ 23
3.4 WREVFAIL ........................................................................................................ 23
3.5 CFAX_LOGID_WRQUEFAIL ............................................................................. 24
4 CFM Messages ....................................................................................................... 24
4.1 CFM_LOG ......................................................................................................... 24
4.2 CFM_LOG ......................................................................................................... 25
4.3 CFM_LOG ......................................................................................................... 25
4.4 CFM_LOG ......................................................................................................... 26
4.5 CFM_LOG ......................................................................................................... 26
4.6 CFM_LOG ......................................................................................................... 26
4.7 CFM_LOG ......................................................................................................... 27
4.8 CFM_LOG ......................................................................................................... 27
4.9 CFM_LOG ......................................................................................................... 27
4.10 CFM_LOG ......................................................................................................... 28
4.11 CFM_LOG ......................................................................................................... 28
4.12 CFM_LOG ......................................................................................................... 29
4.13 CFM_LOG ......................................................................................................... 29
4.14 CFM_LOG ......................................................................................................... 29
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page3, Total 176
4.15 CFM_LOG ......................................................................................................... 30
4.16 CFM_LOG ......................................................................................................... 30
4.17 CFM_LOG ......................................................................................................... 30
4.18 CFM_LOG ......................................................................................................... 31
4.19 CFM_LOG ......................................................................................................... 31
4.20 CFM_LOG ......................................................................................................... 31
4.21 CFM_LOG ......................................................................................................... 32
4.22 CFM_LOG ......................................................................................................... 32
4.23 CFM_LOG ......................................................................................................... 33
4.24 CFM_LOG ......................................................................................................... 33
4.25 CFM_LOG ......................................................................................................... 33
4.26 CFM_LOG ......................................................................................................... 34
4.27 CFM_LOG ......................................................................................................... 34
4.28 CFM_LOG ......................................................................................................... 34
4.29 CFM_LOG ......................................................................................................... 35
5 CLST Messages ...................................................................................................... 35
5.1 LOG ................................................................................................................... 35
5.2 LOG ................................................................................................................... 36
5.3 LOG ................................................................................................................... 36
5.4 LOG ................................................................................................................... 37
5.5 LOG ................................................................................................................... 37
5.6 LOG ................................................................................................................... 37
5.7 LOG ................................................................................................................... 38
5.8 LOG ................................................................................................................... 38
5.9 LOG ................................................................................................................... 38
5.10 LOG ................................................................................................................... 39
5.11 LOG ................................................................................................................... 39
5.12 LOG ................................................................................................................... 40
5.13 LOG ................................................................................................................... 40
5.14 LOG ................................................................................................................... 40
5.15 LOG ................................................................................................................... 41
5.16 LOG ................................................................................................................... 41
5.17 LOG ................................................................................................................... 41
5.18 LOG ................................................................................................................... 42
5.19 LOG ................................................................................................................... 42
5.20 LOG ................................................................................................................... 43
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page4, Total 176
5.21 LOG ................................................................................................................... 43
5.22 LOG ................................................................................................................... 43
6 CMD Messages ....................................................................................................... 44
6.1 REBOOT ........................................................................................................... 44
6.2 REBOOT ........................................................................................................... 44
6.3 REBOOT ........................................................................................................... 45
6.4 REBOOT ........................................................................................................... 45
6.5 REBOOT ........................................................................................................... 45
6.6 REBOOT ........................................................................................................... 46
6.7 REBOOT ........................................................................................................... 46
6.8 REBOOT ........................................................................................................... 47
7 DHCPS Messages .................................................................................................. 47
7.1 DHCPS_LOCAL_SERVER ................................................................................ 47
8 FIB Messages ......................................................................................................... 48
8.1 log_fib ................................................................................................................ 48
8.2 log_fib ................................................................................................................ 49
9 FTP Server Messages ............................................................................................. 49
9.1 USERIN ............................................................................................................. 49
9.2 USEROUT ......................................................................................................... 49
9.3 USERIN ............................................................................................................. 50
9.4 USERFAIL ......................................................................................................... 50
9.5 REQUEST ......................................................................................................... 51
9.6 SENDDATA ....................................................................................................... 51
9.7 RECVDATA ....................................................................................................... 52
9.8 RUNERROR ...................................................................................................... 52
9.9 FTPS_LOG ........................................................................................................ 52
10 GARP Messages ............................................................................................... 53
10.1 Wrong Protocol Id .............................................................................................. 53
10.2 Wrong message ................................................................................................ 53
10.3 Valid Msg ........................................................................................................... 53
10.4 Wrong Msg ........................................................................................................ 54
10.5 Wrong Msg Length ............................................................................................ 54
10.6 Wrong attribute .................................................................................................. 55
10.7 Add Entry To GID Failed ................................................................................... 55
10.8 Malloc Failed ..................................................................................................... 55
11 HTTPD Messages ............................................................................................. 56
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page5, Total 176
11.1 Log .................................................................................................................... 56
12 HWCM Messages .............................................................................................. 56
12.1 EXIT .................................................................................................................. 56
12.2 TRAPLOG ......................................................................................................... 57
12.3 CCOPY .............................................................................................................. 57
13 IP Messages ...................................................................................................... 58
13.1 ReassError ........................................................................................................ 58
13.2 QueueFull .......................................................................................................... 58
13.3 MSG .................................................................................................................. 58
13.4 MSG .................................................................................................................. 59
13.5 MSG .................................................................................................................. 59
13.6 MFC ................................................................................................................... 60
14 L2INF Messages ............................................................................................... 60
14.1 PORT LINK ST .................................................................................................. 60
14.2 PORT LINK ST .................................................................................................. 60
14.3 VLANIF LINK ..................................................................................................... 61
14.4 VLANIF LINK ..................................................................................................... 61
14.5 PORT PHY TYP ................................................................................................ 61
14.6 PORT STATUS ................................................................................................. 62
14.7 PORT STATUS ................................................................................................. 62
14.8 PORT LOOPBAC .............................................................................................. 62
14.9 PORT LOOPBAC .............................................................................................. 63
14.10 PORT LOOPBAC ........................................................................................ 63
14.11 VOICE VLAN A ............................................................................................ 63
15 LACL Messages ................................................................................................ 64
15.1 APPLYERR ....................................................................................................... 64
15.2 APPLYERR ....................................................................................................... 64
15.3 APPLYERR ....................................................................................................... 65
15.4 APPLYERR ....................................................................................................... 65
15.5 APPLYERR ....................................................................................................... 65
15.6 APPLYERR ....................................................................................................... 66
15.7 APPLYERR ....................................................................................................... 66
15.8 APPLYERR ....................................................................................................... 66
15.9 DELETEERR ..................................................................................................... 67
15.10 DELETEERR ............................................................................................... 67
15.11 DELETEERR ............................................................................................... 68
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page6, Total 176
15.12 DELETEERR ............................................................................................... 68
15.13 DELETED .................................................................................................... 68
16 LACP Messages ................................................................................................ 69
16.1 PartnerNoLacp .................................................................................................. 69
16.2 AggCreFail ......................................................................................................... 69
16.3 AggCreFail ......................................................................................................... 70
17 LQOS Messages ............................................................................................... 70
17.1 APPLYERR ....................................................................................................... 70
17.2 ADDEXIST ......................................................................................................... 71
17.3 NOTSUPPORT .................................................................................................. 71
17.4 ACTIONERR ..................................................................................................... 71
17.5 ACLERR ............................................................................................................ 72
17.6 RESOURCE ...................................................................................................... 72
17.7 REGISTER ........................................................................................................ 73
17.8 CONFLICT ......................................................................................................... 73
17.9 DELERR ............................................................................................................ 74
17.10 NOTEXIST ................................................................................................... 74
18 MSDP Messages ............................................................................................... 74
18.1 PEER_UPDOWN .............................................................................................. 74
18.2 PEER_UPDOWN .............................................................................................. 75
18.3 SA_LIMIT........................................................................................................... 75
19 MSTP Messages ............................................................................................... 76
19.1 STPSTART ........................................................................................................ 76
19.2 STPSTOP .......................................................................................................... 76
19.3 PFWD ................................................................................................................ 77
19.4 PDISC ............................................................................................................... 77
19.5 ROOT ................................................................................................................ 78
19.6 IVBPDU ............................................................................................................. 78
19.7 RGSUP .............................................................................................................. 78
19.8 LGEXP .............................................................................................................. 79
19.9 UNSUPPORT .................................................................................................... 79
19.10 PSTPDISA ................................................................................................... 79
19.11 MIRRORSTPDISA ....................................................................................... 80
19.12 QUEFILL ...................................................................................................... 80
19.13 EVENTERROR ............................................................................................ 81
19.14 AGEDOUT ................................................................................................... 81
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page7, Total 176
19.15 FORMATERR .............................................................................................. 81
19.16 FRMTINCMPGUARD .................................................................................. 82
20 NDP Messages .................................................................................................. 82
20.1 NDPSTART ....................................................................................................... 82
20.2 NDPSTOP ......................................................................................................... 83
21 NTDP Messages ............................................................................................... 83
21.1 NTDPSTART ..................................................................................................... 83
21.2 NTDPSTOP ....................................................................................................... 84
22 NTP Messages .................................................................................................. 84
22.1 NTP_LOG .......................................................................................................... 84
22.2 NTP_LOG .......................................................................................................... 84
22.3 NTP_LOG .......................................................................................................... 85
22.4 NTP_LOG .......................................................................................................... 85
22.5 NTP_LOG .......................................................................................................... 85
22.6 NTP_LOG .......................................................................................................... 86
22.7 NTP_LOG .......................................................................................................... 86
23 OADP Messages ............................................................................................... 87
23.1 OADPSTART ..................................................................................................... 87
23.2 OADPSTOP ....................................................................................................... 87
23.3 CDPSTART ....................................................................................................... 87
23.4 CDPSTOP ......................................................................................................... 88
24 PKI Messages ................................................................................................... 88
24.1 Local_Cert_Retrieval ......................................................................................... 88
24.2 Local_Cert_Retrieval ......................................................................................... 88
24.3 CA_Cert_Retrieval ............................................................................................. 89
24.4 CA_Cert_Retrieval ............................................................................................. 89
24.5 CA_Cert_Retrieval ............................................................................................. 90
24.6 CA_Cert_Retrieval ............................................................................................. 90
24.7 CA_Cert_Retrieval ............................................................................................. 90
24.8 CA_Cert_Retrieval ............................................................................................. 91
24.9 Local_Cert_Request .......................................................................................... 91
24.10 Local_Cert_Request .................................................................................... 91
24.11 Local_Cert_Request .................................................................................... 92
24.12 Import_Cert_File .......................................................................................... 92
24.13 Import_Local_Cert ....................................................................................... 92
24.14 Import_Local_Cert ....................................................................................... 93
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page8, Total 176
24.15 Import_Local_Cert ....................................................................................... 93
24.16 Import_Local_Cert ....................................................................................... 94
24.17 Import_Local_Cert ....................................................................................... 94
24.18 Import_Local_Key ........................................................................................ 94
24.19 Import_Local_Key ........................................................................................ 95
24.20 Import_CA_Cert ........................................................................................... 95
24.21 Import_CA_Cert ........................................................................................... 95
24.22 Import_CA_Cert ........................................................................................... 96
24.23 Import_CA_Cert ........................................................................................... 96
24.24 Import_CA_Cert ........................................................................................... 97
24.25 Import_CA_Cert ........................................................................................... 97
24.26 Import_CA_Cert ........................................................................................... 98
24.27 Import_CA_Cert ........................................................................................... 98
24.28 Update_CA_Cert ......................................................................................... 98
24.29 Update_CA_Cert ......................................................................................... 99
24.30 Delete_CA_Cert ........................................................................................... 99
24.31 Delete_CA_Cert ......................................................................................... 100
24.32 Delete_CA_Cert ......................................................................................... 100
24.33 Delete_Local_Cert ..................................................................................... 100
24.34 Delete_Local_Cert ..................................................................................... 101
24.35 Verify_Cert ................................................................................................. 101
24.36 Verify_Cert ................................................................................................. 101
24.37 Verify_CA_Root_Cert ................................................................................ 102
24.38 Verify_CA_Root_Cert ................................................................................ 102
24.39 Retrieval_CRL ........................................................................................... 103
24.40 Retrieval_CRL ........................................................................................... 103
24.41 Update_CRL .............................................................................................. 103
24.42 Update_CRL .............................................................................................. 104
24.43 Update_CRL .............................................................................................. 104
25 RDS Messages ................................................................................................ 104
25.1 LOGIN ............................................................................................................. 105
25.2 LOGIN ............................................................................................................. 105
25.3 LOGIN ............................................................................................................. 106
25.4 LOGIN ............................................................................................................. 106
26 RM Messages .................................................................................................. 107
26.1 RTLOG ............................................................................................................ 107
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page9, Total 176
26.2 RTLOG ............................................................................................................ 107
26.3 RTLOG ............................................................................................................ 107
26.4 RTLOG ............................................................................................................ 108
26.5 RTLOG ............................................................................................................ 108
26.6 RTLOG ............................................................................................................ 109
26.7 RTLOG ............................................................................................................ 109
26.8 RTLOG ............................................................................................................ 109
26.9 RTLOG ............................................................................................................ 110
26.10 RTLOG ...................................................................................................... 110
26.11 RTLOG ...................................................................................................... 111
26.12 RTLOG ...................................................................................................... 111
26.13 RTLOG ...................................................................................................... 112
26.14 RTLOG ...................................................................................................... 112
26.15 RTLOG ...................................................................................................... 113
26.16 RTLOG ...................................................................................................... 113
26.17 RTLOG ...................................................................................................... 113
26.18 RTLOG ...................................................................................................... 114
26.19 RTLOG ...................................................................................................... 114
26.20 RTLOG ...................................................................................................... 115
26.21 RTLOG ...................................................................................................... 115
26.22 RTLOG ...................................................................................................... 115
26.23 RTLOG ...................................................................................................... 116
26.24 RTLOG ...................................................................................................... 116
26.25 RTLOG ...................................................................................................... 116
26.26 RTLOG ...................................................................................................... 117
26.27 RTLOG ...................................................................................................... 117
26.28 RTLOG ...................................................................................................... 118
26.29 RTLOG ...................................................................................................... 118
26.30 RTLOG ...................................................................................................... 118
26.31 RTLOG ...................................................................................................... 119
26.32 RTLOG ...................................................................................................... 119
26.33 RTLOG ...................................................................................................... 120
26.34 RTLOG ...................................................................................................... 120
26.35 RTLOG ...................................................................................................... 120
26.36 RTLOG ...................................................................................................... 121
26.37 RTLOG ...................................................................................................... 121
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page10, Total 176
26.38 RTLOG ...................................................................................................... 121
26.39 RTLOG ...................................................................................................... 122
26.40 RTLOG ...................................................................................................... 122
26.41 RTLOG ...................................................................................................... 123
26.42 RTLOG ...................................................................................................... 123
26.43 RTLOG ...................................................................................................... 123
26.44 RTLOG ...................................................................................................... 124
26.45 RTLOG ...................................................................................................... 124
26.46 RTLOG ...................................................................................................... 124
26.47 RTLOG ...................................................................................................... 125
26.48 RTLOG ...................................................................................................... 125
26.49 RTLOG ...................................................................................................... 126
26.50 RTLOG ...................................................................................................... 126
26.51 RTLOG ...................................................................................................... 126
26.52 RTLOG ...................................................................................................... 127
26.53 RTLOG ...................................................................................................... 127
26.54 RTLOG ...................................................................................................... 127
26.55 RTLOG ...................................................................................................... 128
26.56 RTLOG ...................................................................................................... 128
26.57 RTLOG ...................................................................................................... 129
26.58 RTLOG ...................................................................................................... 129
26.59 RTLOG ...................................................................................................... 130
26.60 RTLOG ...................................................................................................... 130
26.61 RTLOG ...................................................................................................... 131
26.62 RTLOG ...................................................................................................... 131
26.63 RTLOG ...................................................................................................... 131
27 RMON Messages ............................................................................................ 132
27.1 ADDINFO ........................................................................................................ 132
27.2 DELINFO ......................................................................................................... 132
28 RSA Messages ................................................................................................ 133
28.1 Key_create ...................................................................................................... 133
28.2 Key_create ...................................................................................................... 133
28.3 Key_create ...................................................................................................... 134
28.4 Key_create ...................................................................................................... 134
28.5 Key_create ...................................................................................................... 134
28.6 Key_create ...................................................................................................... 135
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page11, Total 176
28.7 Key_create ...................................................................................................... 135
28.8 Key_create ...................................................................................................... 135
28.9 Key_destroy ..................................................................................................... 136
28.10 Key_destroy ............................................................................................... 136
28.11 Key_destroy ............................................................................................... 137
%Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy ............................................. 137
28.12 Key_destroy ............................................................................................... 137
28.13 Key_destroy ............................................................................................... 137
28.14 Key_destroy ............................................................................................... 138
28.15 Write_flash ................................................................................................. 138
28.16 Save_keys ................................................................................................. 138
28.17 Save_keys ................................................................................................. 139
28.18 Save_keys ................................................................................................. 139
28.19 Save_keys ................................................................................................. 140
28.20 Read_keys ................................................................................................. 140
28.21 Read_keys ................................................................................................. 140
28.22 Read_keys ................................................................................................. 141
28.23 Backup_Keys ............................................................................................. 141
28.24 Backup_Keys ............................................................................................. 141
29 SHELL Messages ............................................................................................ 142
29.1 LOGIN ............................................................................................................. 142
29.2 LOGOUT ......................................................................................................... 142
29.3 CMD ................................................................................................................ 143
29.4 SYN_ERROR .................................................................................................. 143
29.5 SYN_ERROR .................................................................................................. 144
30 SNMP Messages ............................................................................................. 144
30.1 GET ................................................................................................................. 144
30.2 SET ................................................................................................................. 145
31 SOCKET Messages ........................................................................................ 145
31.1 SOCKETLOG .................................................................................................. 145
31.2 TCP MD5 ......................................................................................................... 146
32 SSH Messages ................................................................................................ 146
32.1 ver_len_err ...................................................................................................... 146
32.2 ver_major_err .................................................................................................. 146
32.3 ver_minor_err .................................................................................................. 147
32.4 ver_minor_unspt .............................................................................................. 147
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page12, Total 176
32.5 buf_len_zero .................................................................................................... 147
32.6 session_msg_err ............................................................................................. 148
32.7 cipher_err ........................................................................................................ 148
32.8 cookie_err ........................................................................................................ 149
32.9 user_msg_err .................................................................................................. 149
32.10 auth_retryt_out ........................................................................................... 149
32.11 auth_msg_err ............................................................................................. 150
32.12 passwd_len_err ......................................................................................... 150
32.13 passwd_err ................................................................................................ 150
32.14 authrsa_msg_err ........................................................................................ 151
32.15 rsarspn_msg_err ........................................................................................ 151
32.16 challenge_err ............................................................................................. 152
32.17 getckey_err ................................................................................................ 152
32.18 username_len_err ...................................................................................... 152
32.19 user_not_exist ........................................................................................... 153
32.20 user_noauth ............................................................................................... 153
32.21 rsa_n_err ................................................................................................... 153
32.22 fsm_move .................................................................................................. 154
32.23 err_dissconnect ......................................................................................... 154
32.24 unexpected_msg ....................................................................................... 155
32.25 bad_cmd_length ........................................................................................ 155
32.26 msg_disconnect ......................................................................................... 155
32.27 bad_plaintext_length .................................................................................. 156
32.28 bad_cryptograph_len ................................................................................. 156
32.29 bad_key_length ......................................................................................... 156
32.30 bad_iv_len ................................................................................................. 157
32.31 bad_string_len ........................................................................................... 157
32.32 bignum_len_wrong .................................................................................... 158
32.33 bignum_not_full ......................................................................................... 158
32.34 unknown_cipher_type ................................................................................ 158
32.35 send_length_wrong ................................................................................... 159
32.36 send_buf_null ............................................................................................ 159
32.37 send_fail .................................................................................................... 159
32.38 msg_length_slop ........................................................................................ 160
32.39 read_length_wrong .................................................................................... 160
32.40 read_crc_wrong ......................................................................................... 160
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page13, Total 176
32.41 user_exist .................................................................................................. 161
32.42 add_success .............................................................................................. 161
32.43 del_success ............................................................................................... 161
32.44 getkey_fail .................................................................................................. 162
32.45 accept_err .................................................................................................. 162
32.46 malloc_err .................................................................................................. 163
32.47 buf_get_wrong ........................................................................................... 163
32.48 des_setkey_fail .......................................................................................... 163
32.49 3des_setkey_fail ........................................................................................ 164
32.50 rsa_decrypt_fail ......................................................................................... 164
32.51 rsa_gethostkey_fail .................................................................................... 164
32.52 rsa_getserverkey_fail ................................................................................. 165
32.53 rsa_encrytp_fail ......................................................................................... 165
32.54 socket_send_fail. ....................................................................................... 166
32.55 no_auth_type ............................................................................................. 166
32.56 get_version_fail .......................................................................................... 166
32.57 rcv_unexpected_msg ................................................................................. 167
32.58 msg_type_illegal ........................................................................................ 167
32.59 msg_tran_close ......................................................................................... 167
32.60 msg_tran_deadloop ................................................................................... 168
32.61 msg_client_exit .......................................................................................... 168
32.62 msg_ssh_vty .............................................................................................. 168
33 VFS Messages ................................................................................................ 169
33.1 VFSLOG .......................................................................................................... 169
34 VLAN Messages .............................................................................................. 170
34.1 DETECT_FORBIDDEN ................................................................................... 170
34.2 DETECT_FORBIDDEN ................................................................................... 170
34.3 BATCH notify ................................................................................................... 170
35 VRRP Messages ............................................................................................. 171
35.1 LogAuthFailed ................................................................................................. 171
35.2 ConfigError ...................................................................................................... 171
35.3 ConfigError ...................................................................................................... 172
35.4 MasterChange ................................................................................................. 173
35.5 RunError .......................................................................................................... 173
35.6 SetDriver.......................................................................................................... 174
35.7 TrapBecomeNewMaster .................................................................................. 174
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page14, Total 176
35.8 TrapAuthFailed ................................................................................................ 175
36 VTY Messages ................................................................................................ 175
36.1 VTY_LOG ........................................................................................................ 175
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page15, Total 176
i Revision History
Every column should be filled
The format of Revision“” is xx.yy. And xx is major version, yy is minor version. The
initial version begins with 0.01.
Revisio
n
Date Author Reason for Change
0.01 2006-02-14 Plat mib First Draft
ii References
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page16, Total 176
Purpose
This document describes all of the system log messages which are supported by
Comware V3 Switch.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page17, Total 176
Introduction
About the table in which the details of system log messages are filled, the
explanations of all the items of the table are stated here: Item Description
Mnemonic The text string that uniquely describes the system message
Severity Level Single-digit code from 0 to 7 that indicates the severity of the message
Syslog Message This portion of the message might contain detailed information about the event,
such as terminal port numbers, network addresses, or addresses that correspond
to locations in the system memory address space.
Because the information in these variable fields changes from message to
message, it is represented here by short strings enclosed in square brackets ([ ]).
A text string, for example, is represented as [string].
Variable Field The signification of the variable fields in syslong message format string
Explanation The signification indicated when system sends a syslog message
Trigger Action The action which triggers off system to send a syslog message.For the same
syslog message, there is more than one trigger action possibly.
Example The instance of system log message
Recommended
Action
The action to be done when such system log message occurs
Trigger Action, Example and Recommended Action fields might occur many times in
the same table, if there are different trigger actions for that message. These three fields
should be bundled and sequenced by “Trigger Action->Example->Recommended Action”
order.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page18, Total 176
System Log Message Format
This section describes system log messages as defined by the syslog protocol
(RFC3164) and how to understand the syslog message format.
<Int_16>TIMESTAMP HOSTNAME %%nnAAA/B/CCC(l):- -DevIP=x.x.x.x-Slot=k–XXX; YYYY
① ② ③ ④/⑤/⑥ ⑦ ⑧
Element Description
① Combination of Facility and Severity defined in RFC3164
② The time of event or error.The format can be configured by command line.
③ The name of the device
④ Module name
⑤ Severity level.See the following table about severity level.
⑥ Mnemonic.The text string that uniquely describes the system message
⑦ Reserved section.It is used for system extendability
⑧ The text string containing detailed information about the event or error being
reported
System log message severity level ranges from 0 to 7 and reflects the severity of the
condition, as defined in RFC3164. The lower the number is, the more serious the situation
is. The following table lists the severity levels.
Level Description
0 - emergency System is unusable
1 - alert Action must be taken immediately
2 - critical Critical conditions
3 - error Error conditions
4 - warning Warning conditions
5 - notification Normal but significant condition
6 - informational Informational messages
7- debugging Debug-level messages
There are some variable fields representation in system log message format.The
representations of variable fields and the type of information in the fields as follows:
Representation Description
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page19, Total 176
Representation Description
[STRING]/[string] Character string
[IPADDR]/[ipaddr] IP address
[ULONG]/[ulong] Decimal number
[OID]/[oid] Object identifier
[INTEGER]/[integer] Decimal number
[USHORT]/[ushort] Decimal number
[TIMETICK]/[timetick] Time
System Log Message Module List
In this section, all syslog module supported by Comware V3 Switch are listed.
Any action to add, modify, delete and remove must be recorded in Revision History
Module Name column indicates module which system log messages belong to
Count of syslog column indicates the total count of system log messages in moudule
Current state column indicates the state of supporting system log messages.The
possible values as follows:
Full: fully supported
Partial: partially supported
Obsolete: This module is obsoleted and not longer to be supported.
None: This module is not supported.
Module Name Count of syslog Current state
FIB 2 Partial
IP
OADP
RMON 2 Full
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page20, Total 176
Module Name Count of syslog Current state
1 802.1X Messages
This section contains the entire system log messages related to 802.1X.
1.1 DOT1X_LOG
Mnemonic DOT1X_LOG Severity Level 3
Syslog Message [STRING]
Variable Fields $1: the log string
Explanation The authentication of an 802.1x user failed.
Trigger Action Username or password mismatch.
Example %Apr 26 12:07:04:802 2000 Quidway
8021X/3/DOT1X_LOG:Port:11,Auth:0,Authentication failed: 8021X
authentication failed.
Recommended
Action
Input correct username or password.
Is Supported Yes
2 ARP Messages
This section contains the entire system log messages related to ARP.
2.1 DUPIP
Mnemonic DUPIP Severity Level 4
Syslog Message IP address [ipaddr] collision detected, sourced by [STRING] on
[octet] of VLAN[ushort] and [STRING] on [octet] of VLAN[ushort]
Variable Fields $1: IP Address
$2: the first MAC of the same IP Address
$3: the name of the port on which the first MAC exists
$4: VLAN id of the first MAC
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page21, Total 176
$5: the second MAC of the same IP Address
$6: the name of the port on which the second MAC exists
$7: VLAN id of t
Explanation The source IP address collides with the one of existing ARP entry.
Trigger Action When receive ARP packet which has same source IP address and
different source MAC address with existing ARP entry.
Example %Mar 3 16:20:34 2005 Quidway ARP/4/DUPIP:IP address
1.1.1.5 collision detected, sourced by 0100-0300-0500 on
Ethernet0/1 of VLAN1 and 0100-0300-0512 on Ethernet0/2 of
VLAN2
Recommended
Action
No action is required.
Is Supported Yes
2.2 DUPIFIP
Mnemonic DUPIFIP Severity Level 3
Syslog Message Duplicate address [ipaddr] on VLAN[ushort], sourced by [STRING]
Variable Fields $1: IP Address
$2: the VLAN id of the source MAC
$3: MAC of the same IP Address
Explanation The source IP address collides with the one of local interface.
Trigger Action When receive ARP packet which has same source IP address with
local interface.
Example %Mar 3 16:20:34 2005 Quidway ARP/4/DUPIFIP:Duplicate
address 100.10.10.10 on VLAN1, sourced by 0058-9b3d-3013
Recommended
Action
No action is required.
Is Supported Yes
2.3 DUPVRRPIP
Mnemonic DUPVRRPIP Severity Level 3
Syslog Message IP address [ipaddr] collision with VRRP virtual IP address on
VLAN[ushort], sourced by [STRING]
Variable Fields $1: IP Address
$2: the name of an interface
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page22, Total 176
$3: MAC of the same IP Address
Explanation The source IP address collides with virtual IP address of VRRP
Trigger Action When receive ARP packet which has same source IP address with
virtual IP address of VRRP.
Example %Mar 3 16:20:34 2005 Quidway ARP/4/DUPIFIP:Duplicate
address 100.10.10.10 on VLAN1, sourced by 0058-9b3d-3013
Recommended
Action
No action is required.
Is Supported Yes
2.4 ARP TABLE FULL
Mnemonic ARP TABLE FULL Severity Level 4
Syslog Message ARP table is full
Variable Fields
Explanation ARP table is full.
Trigger Action When ARP table is full or add new ARP entry after that. The interval
of each LOG should be no less than 30 seconds
Example #Apr 1 23:58:42:038 2000 5500-EI ETH/5/ARP TABLE FULL:- 1 -
ARP table is full
Recommended
Action
No action is required.
Is Supported Yes
3 CFAX Messages
This section contains the entire system log messages related to cfax.
3.1 SENDFAIL
Mnemonic SENDFAIL Severity Level 4
Syslog Message \r\n UNIT [ULONG] : [STRING] send message failed\r\n
Variable Fields $1: Unit ID
$2: send message type
Explanation It indicates that CFAX send message failed
Trigger Action CFAX sending message failed
Example %Mar 3 16:20:34 2005 Quidway cfax/4/SENDFAIL:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page23, Total 176
UNIT 1 : CFAX UNICAST send message failed
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
3.2 TIMEOUT
Mnemonic TIMEOUT Severity Level 4
Syslog Message \r\n UNIT [ULONG] : [STRING] message timeout\r\n
Variable Fields $1: Unit ID
$2: send message type
Explanation It indicates that CFAX send message failed because of time out
Trigger Action CFAX sending message failed because of time out
Example %Mar 3 16:20:34 2005 Quidway cfax/4/SENDFAIL:
UNIT 1 : CFAX UNICAST message timeout
Recommended
Action
No action is required.
Is Supported NO
3.3 PROCINFO
Mnemonic PROCINFO Severity Level 4
Syslog Message \r\n UNIT [ULONG] : [STRING] process information\r\n
Variable Fields $1: Unit ID
$2: Event information of CFAX
Explanation It indicates that CFAX receive message and process it
Trigger Action CFAX received message and process information
Example %Mar 3 16:20:34 2005 Quidway cfax/4/PROCINFO:
UNIT 1 : CFAX RECEIVE EVENT process information
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
3.4 WREVFAIL
Mnemonic WREVFAIL Severity Level 4
Syslog Message \r\n UNIT [ULONG] : [STRING] write event failed\r\n
Variable Fields $1: Unit ID
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page24, Total 176
$2: Event information of CFAX
Explanation It indicates that CFAX write event failed
Trigger Action CFAX write event failed
Example %Mar 3 16:20:34 2005 Quidway cfax/4/WREVFAIL:
UNIT 1 : CFAX SET DELETE FLAG write event failed
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
3.5 CFAX_LOGID_WRQUEFAIL
Mnemonic CFAX_LOGID_WRQUEFAIL Severity Level 4
Syslog Message \r\n UNIT [ULONG] : [STRING] write event failed\r\n
Variable Fields $1: Unit ID
$2: Event information of CFAX
Explanation It indicates that CFAX write message queue failed
Trigger Action CFAX write message to queue failed
Example %Mar 3 16:20:34 2005 Quidway
cfax/4/CFAX_LOGID_WRQUEFAIL:
UNIT 1 : CFAX NOTIFY QUEUE write message to queue failed
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4 CFM Messages
This section contains the entire system log messages related to CFM.
4.1 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message [STRING]
Variable Fields $1: the log string
Explanation Record logs related to CFM
Trigger Action Replace buildrun, get current buildrun, show buildrun or recover
configuration occur errors
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page25, Total 176
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG: Command
interface ethernet1/0/48 fails to recover configuration.
Recommended
Action
No action is required.
Is Supported Yes
4.2 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Minimum Unit[ULONG] recover configuration from temporary
configuration file.
Variable Fields $1: Unit ID
Explanation It indicates that minimum unit recovered from temporary
configuration file
Trigger Action Unit with minimum unit id recovered from temporary configuration
file
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Minimum
Unit1 recover configuration from temporary configuration file.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.3 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Single unit[ULONG] recover configuration from temporary
configuration file.
Variable Fields $1: Unit ID
Explanation It indicates that single unit recovered from temporary configuration
file
Trigger Action Single unit recovered from temporary configuration file
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Single unit1
recover configuration from temporary configuration file.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page26, Total 176
4.4 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] synchronize configuration unsuccessfully.
Variable Fields $1: Unit ID
Explanation It indicates that unit synchronize configuration from minimum unit
failed
Trigger Action Unit synchronize configuration from minimum unit failed
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit2
synchronize configuration unsuccessfully.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.5 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] 's configuration is different from the minimum unit.
Variable Fields $1: Unit ID
Explanation It indicates that unit’s current configuration is different from
minimum unit
Trigger Action When establish fabric, unit’s current configuration is different from
minimum unit
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit2 's
configuration is different from the minimum unit.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.6 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] fail to save configuration.
Variable Fields $1: Unit ID
Explanation It indicates that unit [id] saving failed
Trigger Action When saving configuration in fabric, one of the units save failed for
insufficient space and so on
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page27, Total 176
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 fail to
save configuration.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.7 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG]' checksum is different from unit[ULONG]
Variable Fields $1: Unit ID
$2: Unit ID
Explanation It indicates that configurations of units are different
Trigger Action When saving configuration in fabric, current configuration of one
unit is different from another’s
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit2'
checksum is different from unit1.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.8 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Minimum unit[ULONG] fails to save configuration.
Variable Fields $1: Unit ID
Explanation It indicates that minimum unit saved failed
Trigger Action When saving configuration in fabric, minimum unit saved failed
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Minimum
unit1 fails to save configuration.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.9 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] save configuration successfully.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page28, Total 176
Variable Fields $1: Unit ID
Explanation It indicates that unit saved successfully
Trigger Action When saving configuration in fabric, unit saved successfully
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 save
configuration successfully.
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
4.10 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] erase the configuration unsuccessfully
Variable Fields $1: Unit ID
Explanation It indicates that unit executed “reset saved-configuration” failed
Trigger Action When executing “reset saved-configuration” in fabric, unit [id] failed
to erase configuration file.
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 erase
the configuration unsuccessfully.
Recommended
Action
No action is required.
Is Supported NO
4.11 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] erase the configuration successfully.
Variable Fields $1: Unit ID
Explanation It indicates that unit executed “reset saved-configuration”
successfully
Trigger Action When executing “reset saved-configuration” in fabric, unit [id] erase
d configuration file successfully.
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 erase
the configuration successfully.
Recommended
Action
No action is required.
Is Supported NO
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page29, Total 176
4.12 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Calling VOS_Malloc() or VOS_RawMalloc() unsuccessfully.
Variable Fields NULL
Explanation It indicates that malloc memory failed in some cases
Trigger Action Memory malloc failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Calling
VOS_Malloc() or VOS_RawMalloc() unsuccessfully.
Recommended
Action
No action is required.
Is Supported NO
4.13 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Calling CFM_IPC_Send() unsuccessfully.
Variable Fields NULL
Explanation It indicates that calling CFM_IPC_Send() failed
Trigger Action Calling CFM_IPC_Send() failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Calling
CFM_IPC_Send() unsuccessfully.
Recommended
Action
No action is required.
Is Supported YES
4.14 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Calling compress() or uncompress() unsuccessfully.
Variable Fields NULL
Explanation It indicates that calling compress() or uncompress() failed
Trigger Action Calling compress() or uncompress()failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Calling
compress() or uncompress() unsuccessfully.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page30, Total 176
Is Supported YES
4.15 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Get current buildrun info unsuccessfully.
Variable Fields NULL
Explanation It indicates that get current configuration failed
Trigger Action Calling CFM_GetCurrentBuildRunInfoEx() to get current
configuration failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Get current
buildrun info unsuccessfully.
Recommended
Action
No action is required.
Is Supported YES
4.16 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Receiving CFM_SYNCCFG_ERR message.
Variable Fields NULL
Explanation It indicates that synchronizeconfiguration with minimum unit failed
Trigger Action synchronizeconfiguration with minimum unit failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Receiving
CFM_SYNCCFG_ERR message.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.17 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Synchronizing configuration time out.
Variable Fields NULL
Explanation It indicates that synchronizeconfiguration with minimum unit
because of time out
Trigger Action synchronizeconfiguration with minimum unit failed because of time
out
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page31, Total 176
Example %Mar 3 16:20:34 2005 Quidway
CFM/5/CFM_LOG:Synchronizing configuration time out.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.18 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Save configuration file unsuccessfully.
Variable Fields NULL
Explanation It indicates that save configuration file failed
Trigger Action Save configuration file failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Save
configuration file unsuccessfully.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.19 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Create Timer unsuccessfully.
Variable Fields NULL
Explanation It indicates that creating timer for synchronizing failed
Trigger Action Creating timer for synchronizing failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Create Timer
unsuccessfully.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.20 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Other error.
Variable Fields NULL
Explanation It indicates that synchronizing configuration failed with errors not
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page32, Total 176
listed before
Trigger Action Synchronizing configuration failed
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Other error.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.21 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Unit[ULONG] CFM reboot the system.
Variable Fields $1: Unit ID
Explanation It indicates that reboot by CFM
Trigger Action Synchronizing needs reboot
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Unit1 CFM
reboot the system.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.22 CFM_LOG
Mnemonic CFM_LOG Severity Level 5
Syslog Message Reject providing configuration to [ULONG], because i'm not
minimum unit or the unit requesting configuration has not been in
fabric.
Variable Fields $1: Unit ID
Explanation It indicates that request for configuration is rejected, for destination
is not minimum unit
Trigger Action Destination of synchronizing request is not minimum unit
Example %Mar 3 16:20:34 2005 Quidway CFM/5/CFM_LOG:Reject
providing configuration to 2, because i'm not minimum unit or the
unit requesting configuration has not been in fabric.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page33, Total 176
4.23 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] 's configuration is same as the minimum unit.
Variable Fields $1: Unit ID
Explanation It indicates that current unit’s configuration is same as minimum
unit
Trigger Action Current unit’s configuration is same as minimum unit
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit2 's
configuration is same as the minimum unit.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.24 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] fail to set configuration.
Variable Fields $1: Unit ID
Explanation It indicates that current unit’s fail to set next start up configuration
file
Trigger Action Current unit’s fail to set next start up configuration file
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit 2 fail to
set configuration.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.25 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] the file does not exist.
Variable Fields $1: Unit ID
Explanation It indicates that current unit’s fail to set next start up configuration
file because specified unit doesn’t exist
Trigger Action Current unit’s fail to set next start up configuration file because
specified unit doesn’t exist
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 the file
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page34, Total 176
does not exist.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.26 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] set the configuration successfully.
Variable Fields $1: Unit ID
Explanation It indicates that current unit’s set next start up configuration file
successfully
Trigger Action Current unit’s set next start up configuration file successfully
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1 set the
configuration successfully.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.27 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Unit[ULONG] postpone notifying the result of saving configuration.
Variable Fields $1: Unit ID
Explanation It indicates that unit[id] postpone notifying the result of saving
configuration
Trigger Action Unit[id] postpone notifying the result of saving configuration
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Unit1
postpone notifying the result of saving configuration
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.28 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Specified boot file does not exist on current unit.
Variable Fields NULL
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page35, Total 176
Explanation It indicates that specified boot system file doesn’t exist on unit [id]
Trigger Action Specified boot system file doesn’t exist on unit [id]
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Specified
boot file does not exist on current unit.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
4.29 CFM_LOG
Mnemonic CFM_LOG Severity Level 3
Syslog Message Stack can't be created for the local space is not enough to save the
temporary configuration file. Please delete some files and try
it again.
Variable Fields NULL
Explanation It indicates that there are not enough space to save temporary
configuration file, so fabric can’t be established.
Trigger Action There are not enough space to save temporary configuration file.
Example %Mar 3 16:20:34 2005 Quidway CFM/3/CFM_LOG:Stack can't
be created for the local space is not enough to save the temporary
configuration file. Please delete some files and try it again.
Recommended
Action
No action is required.
Is Supported YES when XRN is supported
5 CLST Messages
This section contains the entire system log messages related to CLST.
5.1 LOG
Mnemonic LOG Severity Level 4
Syslog Message Member [string]is joined in cluster [string].
Variable Fields $1 Mac Address of member
$2 cluster name
Explanation A member with the $1 number has joined in the cluster $2. (On
command switch)
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page36, Total 176
Trigger Action When A member has joined in the cluster.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Member 000f-2111-0011 is joined in cluster test.
Recommended
Action
No action is required.
Is Supported Yes
5.2 LOG
Mnemonic LOG Severity Level 4
Syslog Message Member [string]is joined in stack.
Variable Fields $1 Mac Address of member
Explanation A member with the $1 number has joined in the stack. (On
command switch)
Trigger Action When A member has joined in the stack.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Member 000f-2111-0011 is joined in stack.
Recommended
Action
No action is required.
Is Supported Yes
5.3 LOG
Mnemonic LOG Severity Level 4
Syslog Message Member [string]in cluster is rejoined.
Variable Fields $1 Mac Address of member
Explanation When shakehang error between the command and the member
switch , without delete operation. The member switch can rejoid the
cluster when shakehand recover to usual. (On command switch)
Trigger Action When he member switch rejoid the cluster after shakehand error
for sometime.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Member 000f-2111-0011 in cluster is rejoined.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page37, Total 176
5.4 LOG
Mnemonic LOG Severity Level 4
Syslog Message Member[string]in cluster is down.
Variable Fields $1 Mac Address of member
Explanation When the command hasn’t received the member’s shakehand
packet for sometime. The member will think the command is down.
(On command switch)
Trigger Action When the command hasn’t received the member’s shakehand
packet. And the time is long than the holdtime
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Member 000f-2111-0011 in cluster is down.
Recommended
Action
No action is required.
Is Supported Yes
5.5 LOG
Mnemonic LOG Severity Level 4
Syslog Message Switch is joined in cluster [string].
Variable Fields $1 cluster name
Explanation A member is added into cluster. (On member switch)
Trigger Action When a member switch is added into cluster by command switch.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Switch is joined in cluster test.
Recommended
Action
No action is required.
Is Supported Yes
5.6 LOG
Mnemonic LOG Severity Level 4
Syslog Message Switch is joined in stack.
Variable Fields
Explanation A member is added into a cluster.(On member switch)
Trigger Action When a member is added into a stack by the command switch.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Switch is joined in stack..
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page38, Total 176
Recommended
Action
No action is required.
Is Supported Yes
5.7 LOG
Mnemonic LOG Severity Level 4
Syslog Message Switch is deleted by cluster [string].
Variable Fields $1 cluster name
Explanation A member is deleted from cluster. (On member switch)
Trigger Action When a member switch is deleted by command switch.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Switch is deleted by cluster test.
Recommended
Action
No action is required.
Is Supported Yes
5.8 LOG
Mnemonic LOG Severity Level 4
Syslog Message Switch is deleted by stack.
Variable Fields $1 cluster name
Explanation A member in stack is deleted.(On member switch)
Trigger Action When a member in stack is deleted by the command switch.
Example %Apr 1 23:56:57:366 2000 Quidway CLST/5/LOG:- 1 -
Switch is deleted by stack.
Recommended
Action
No action is required.
Is Supported Yes
5.9 LOG
Mnemonic LOG Severity Level 4
Syslog Message Cluster administrator is down
Variable Fields $1 cluster name
Explanation When the member hasn’t received the command’s shakehand
packet for sometime. The member will think the command is down.
(On member switch)
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page39, Total 176
Trigger Action When the member hasn’t received the command’s shakehand
packet. And the time is long than the holdtime
Example %Apr 2 02:24:08:294 2000 Quidway CLST/5/LOG:- 1 -
Cluster administrator is down.
Recommended
Action
No action is required.
Is Supported Yes
5.10 LOG
Mnemonic LOG Severity Level 4
Syslog Message Switch is rejoined in cluster.
Variable Fields $1 cluster name
Explanation When shakehang error between the command and the member
switch , without delete operation. The member switch can rejoid the
cluster when shakehand recover to usual. (On member switch)
Trigger Action When he member switch rejoid the cluster after shakehand error
for sometime.
Example %Apr 2 02:24:08:294 2000 Quidway CLST/5/LOG:- 1 -
Switch is rejoined in cluster.
Recommended
Action
No action is required.
Is Supported Yes
5.11 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n %u.%u.%u.%u, specify by cluster"
Variable Fields $1$2$3$4 Ip Address of member
Explanation Allocate a private IP address to each member while founding a
cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
1.1.1.1, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page40, Total 176
5.12 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string public@cm%d, delete by cluster"
Variable Fields $1 Number of member
Explanation Delete the default configuration of snmp community name which
read-only accessed, when dissolving a cluster
Trigger Action When cluster was dissolved
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
community string public@cm0, delete by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.13 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string private@cm%d, delete by cluster"
Variable Fields $1 Number of member
Explanation Delete the default default configuration of snmp community name
which write-only accessed when dissolving a cluster
Trigger Action When cluster was dissolved
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
community string private@cm0, delete by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.14 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string public, delete by cluster"
Variable Fields
Explanation Delete the default configuration of snmp community name which
read-only accessed when dissolving a cluster or stack
Trigger Action When cluster or stack was dissolved
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page41, Total 176
community string public, delete by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.15 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string private, delete by cluster"
Variable Fields
Explanation Delete the default configuration of snmp community name
which write-only accessed when dissolving a cluster or stack
Trigger Action When cluster or stack was dissolved
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
community string private, delete by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.16 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n snmp-agent sys-info version all, specify by cluster"
Variable Fields
Explanation Set system information of the node by default while founding a
cluser
Trigger Action When cluster or stack was founded
Example %Apr 16 14:45:54 2003 stack_0.3026T CLST/6/LOG:
snmp-agent sys-info version all, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.17 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string public@cm%d, specify by cluster"
Variable Fields $1 Number of member
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page42, Total 176
Explanation Set the configuration of snmp community name which read-only
accessed by default while founding a cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:19 2003 aaa_0.3026T CLST/6/LOG:
community string public@cm-2084916772, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.18 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string private@cm%d, specify by cluster"
Variable Fields $1 Number of member
Explanation Set the configuration of snmp community name which write-only
accessed by default while founding a cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:19 2003 aaa_0.3026T CLST/6/LOG:
community string private@cm-2084916745, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.19 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n %s, specify by cluster"
Variable Fields $1 Hostname or info-center loghost 1.1.1.1 or Snmp-agent trap
enable standard or Snmp-agent trap source Vlan-interface 1
Explanation Change the name of each member while founding a cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:19 2003 aaa_0.3026T CLST/6/LOG:
hostname 3026T, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page43, Total 176
5.20 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n community string %s@cm%d, delete by cluster"
Variable Fields $1 community string
$2 Number of member
Explanation The configuration of snmp community name which read-only
accessed configuared on the cluster view is set to each cluster
member while founding a cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:04 2003 3026T CLST/6/LOG:
community string public@cm0, delete by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.21 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n hostname %s, specify by cluster"
Variable Fields $1 Hostname
Explanation Change the name of each member while founding a cluser
Trigger Action When cluster was founded
Example %Apr 15 23:30:19 2003 aaa_0.3026T CLST/6/LOG:
hostname aaa_0.3026T, specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
5.22 LOG
Mnemonic LOG Severity Level 4
Syslog Message "\r\n super password %s, specify by cluster"
Variable Fields $1 Super password
Explanation After a cluster is founded , Synchronize cluster members and set a
super password
Trigger Action When cluster was founded
Example %Apr 18 11:03:04 2000 aaa_1.qx2050 CLST/6/LOG:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page44, Total 176
super password , specify by cluster
Recommended
Action
No action is required.
Is Supported Yes
6 CMD Messages
This section contains the entire system log messages related to CMD.
6.1 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message [string]: cancel reboot parameters at [string].
Variable Fields $1: The information of user location
$2: The current date and time
Explanation Users and time that cancel reboot
Trigger Action Cancel reboot
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
vty0(192.168.10.25): cancel reboot parameters at 16:20:34
2005/12/25
Recommended
Action
No action is required.
Is Supported Yes
6.2 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message \r\n***\r\n*** --- REBOOT IN ONE MINUTE ---\r\n***
Variable Fields NULL
Explanation There are 1 minute remained before rebooting
Trigger Action There are 1 minute remained before rebooting
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
***
*** --- REBOOT IN ONE MINUTE ---
***
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page45, Total 176
Is Supported Yes
6.3 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message \r\nReboot parameters become invalid because [string] changed
system clock.
Variable Fields $1: The information of user location
Explanation There are users that change system time, so schedule reboot
parameters become invalid
Trigger Action There are users that change system time
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
Reboot parameters become invalid because vty0(192.168.10.25)
changed system clock
Recommended
Action
No action is required.
Is Supported Yes
6.4 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message \r\n[string]: schedule reboot parameters at [string]. And system will
reboot at [string].
Variable Fields $1: The information of user location
$2: The current date and time
$3: system reboot time
Explanation There are users setting schedule reboot, and system will reboot at
scheduled time
Trigger Action There are users setting schedule reboot
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
vty0(192.168.10.25): schedule reboot parameters at 16:20:34
2005/12/25. And system will reboot at 18:20 2005/12/25.
Recommended
Action
No action is required.
Is Supported Yes
6.5 REBOOT
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page46, Total 176
Mnemonic REBOOT Severity Level 5
Syslog Message [string]: cancel reboot regularity parameters at [string].
Variable Fields $1: The information of user location
$2: The current date and time
Explanation There are users canceling regular reboot
Trigger Action There are users canceling regular reboot
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
vty0(192.168.10.25): cancel reboot regularity parameters at
16:20:34 2005/12/25
Recommended
Action
No action is required.
Is Supported Yes
6.6 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message [string]: schedule reboot regularity parameters at [string]. And
system will reboot at [string]
Variable Fields $1: The information of user location
$2: The current date and time
$3: system reboot time
Explanation There are users setting regular reboot, and system will regularly
reboot
Trigger Action There are users setting regular reboot
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
vty0(192.168.10.25): schedule reboot regularity parameters at
16:20:34 2005/12/25. And system will reboot at 18:20 2005/12/25.
Recommended
Action
No action is required.
Is Supported Yes
6.7 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message Failed to check boot file on unit [string].
Variable Fields $1: Unit ID
Explanation There are users setting regular reboot, and system will regularly
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page47, Total 176
reboot. But checking boot file on specifed unit failed
Trigger Action Checking boot file on specifed unit failed
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
Failed to check boot file on unit 1
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
6.8 REBOOT
Mnemonic REBOOT Severity Level 5
Syslog Message Specified boot file does not exist on unit [string].
Variable Fields $1: Unit ID
Explanation There are users setting regular reboot, and system will regularly
reboot. But boot file doesn’t exist on specifed unit
Trigger Action Boot file doesn’t exist on specifed unit
Example %Mar 3 16:20:34 2005 Quidway CMD/5/REBOOT:
Specified boot file does not exist on unit 1
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
7 DHCPS Messages
This section contains the entire system log messages related to DHCPS.
7.1 DHCPS_LOCAL_SERVER
Mnemonic DHCPS_LOCAL_SERVER Severity Level 4
Syslog Message Local DHCP server information: Server IP (detected by DHCP
server) = [IPADDR], DHCP server interface = [STRING]
Source client information: DHCP message type = [STRING], DHCP
client hardware address = [STRING]"
Variable Fields $1: The IP address of detected DHCP server.
$2: The name of DHCP server interface from which the DHCP
packets are received.
$3: The type of the received DHCP packet.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page48, Total 176
$4: The hardware address of DHCP client included in the received
DHCP packet.
Explanation A new DHCP server is detected.
Trigger Action Receive a DHCP packet in which the IP adrress in siaddr field is
different from that detected before.
Example %Oct 12 19:35:27:453 2005 server
DHCPS/4/DHCPS_LOCAL_SERVER:
Local DHCP server information(detect by server):SERVER IP =
11.0.0.1, server in
terface = Vlan-interface11; Source client information: type =
DHCPREQUEST, CHard
Addr = 0000-5e00-4704
Recommended
Action
No action is required.
Is Supported Yes
8 FIB Messages
This section contains the entire system log messages related to FIB.
8.1 log_fib
Mnemonic log_fib Severity Level 5
Syslog Message FIB synchro state: [string] [string]
Variable Fields $1: The time when this message sent to the info center.
$2: The detailed description of this message.
Explanation The synchro state during the FIB’s syncronization on centralized
device with XRN/IRF support.
Trigger Action FIB’s periodical refreshing.
Example %Feb 8 07:26:01:525 2011 Quidway FIB/5/log_fib:
FIB synchro state: 2011/02/08 07:26:01 Begin FIB's periodical
refreshing
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page49, Total 176
8.2 log_fib
Mnemonic log_fib Severity Level 5
Syslog Message FIB synchro state: Board [ULONG]: [string] [string]
Variable Fields $1: The number of board.
$2: The time when this message sent to the info center.
$3: The detailed description of this message.
Explanation The synchro state during the FIB’s syncronization on distributed
device.
Trigger Action FIB’s periodical refreshing.
Example %Feb 8 07:26:01:525 2011 Quidway FIB/5/log_fib:
FIB synchro state: Board 1: 2011/02/08 07:26:01 Begin FIB's
periodical refreshing
Recommended
Action
No action is required.
Is Supported No
9 FTP Server Messages
This section contains the entire system log messages related to FTP Server.
9.1 USERIN
Mnemonic USERIN Severity Level 4
Syslog Message User [string]([ipaddr]) login succeeded
Variable Fields $1: The user name of FTP client.
$2: The source IP address of FTP client
Explanation A FTP user has logged in successfully.
Trigger Action FTP server accepts a FTP client request, and user name and
password are correct.
Example %Feb 21 14:27:41:922 2006 Quidway-wvrp FTPS/5/USERIN:User
111(192.168.0.99) login succeeded
Recommended
Action
No action is required.
Is Supported Yes
9.2 USEROUT
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page50, Total 176
Mnemonic USEROUT Severity Level 4
Syslog Message User [string]([ipaddr]) logged out
Variable Fields $1: The user name of FTP client.
$2: The source IP address of FTP client
Explanation A FTP user has logged out.
Trigger Action The user which logged in logs out from FTP server
Example %Feb 21 14:30:24:875 2006 Quidway-wvrp
FTPS/5/USEROUT:User 111(192.168.0.99) logged out
Recommended
Action
No action is required.
Is Supported Yes
9.3 USERIN
Mnemonic USERIN Severity Level 4
Syslog Message User [string]([ipaddr]) login failed
Variable Fields $1: The user name of FTP client.
$2: The source IP address of FTP client
Explanation A FTP user has failed to logged in.
Trigger Action FTP Server accepts a FTP client request, and user name or
password is not correct
Example %Feb 21 14:32:30:672 2006 Quidway-wvrp FTPS/5/USERIN:User
fdfd(192.168.0.99) login failed.
Recommended
Action
No action is required.
Is Supported Yes
9.4 USERFAIL
Mnemonic USERFAIL Severity Level 4
Syslog Message User [string]([ipaddr]) transfer failed
Variable Fields $1: The user name of FTP client.
$2: The source IP address of FTP client
Explanation The FTP client fails to put file to server
Trigger Action Some errors occurr during FTP client put file to server or the space
of disk of FTP server is not enough.
Example %Feb 21 14:40:31:203 2006 Quidway-wvrp
FTPS/5/USERFAIL:User 111(192.168.0.99) transfer failed
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page51, Total 176
Recommended
Action
No action is required.
Is Supported Yes
9.5 REQUEST
Mnemonic REQUEST Severity Level 5
Syslog Message User [string]([ipaddr]) request: [string]
Variable Fields $1: The user name of FTP client.
$2: The source IP address of FTP client
$3: The request command of FTP client to Server
Explanation If FTP server debugging is on, when the user sends request
command to the server, the log info will display.
Trigger Action Switch on the FTP server debugging, the FTP user input some
commands.
Example *0.9652531 Quidway-wvrp FTPS/8/REQUEST:User
111(192.168.0.99) requested: PORT 192,168,0,99,18,162
Recommended
Action
No action is required.
Is Supported Yes
9.6 SENDDATA
Mnemonic SENDDATA Severity Level 5
Syslog Message FTP server send [ULONG] bytes to client [string]([ipaddr])
Variable Fields $1: The file length which is transferred.
$2: The user name of FTP client.
$3: The source IP address of FTP client
Explanation If FTP server debugging is on, when the user get file successfully,
the log info will display.
Trigger Action Switch on the ftp server debugging, the FTP user gets file
successfully.
Example *0.9929938 Quidway-wvrp FTPS/8/RECVDATA:FTP server
received 16045 byte(s) from client 111(192.168.0.99)
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page52, Total 176
9.7 RECVDATA
Mnemonic RECVDATA Severity Level 5
Syslog Message FTP server receive [ULONG] bytes from client [string]([ipaddr])
Variable Fields $1: The file length which is transferred.
$2: The user name of FTP client.
$3: The source IP address of FTP client
Explanation If FTP server debugging is on, when the user put file successfully,
the log info will display.
Trigger Action Switch on the FTP server debugging, the FTP user put file
successfully.
Example *0.9954781 Quidway-wvrp FTPS/8/SENDDATA:FTP server sent
16045 byte(s) to client 111(192.168.0.99)
Recommended
Action
No action is required.
Is Supported Yes
9.8 RUNERROR
Mnemonic RUNERROR Severity Level 4
Syslog Message \r\nFtp server run error [ULONG] ([string])\r\n
Variable Fields $1: The error code
$2: the error infomation
Explanation Fail to configure socket or get task ID or create queue.
Trigger Action Socket error or fail to apply for system’s source
Example %Feb 21 15:25:05:187 2006 Quidway-wvrp FTPS/5/USERIN: Ftp
server run error -11 get task id fail.
Recommended
Action
No action is required.
Is Supported Yes
9.9 FTPS_LOG
Mnemonic FTPS_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output info
Explanation This is a common print info and output the parameter info.
Trigger Action Switch on the FTP server debugging, the FTP user transfer file.
The light of transferring file will be lighted.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page53, Total 176
Example %Feb 21 15:31:30:47 2006 Quidway-wvrp FTPS/5/FTPS_LOG:
FTPS: Begin to download, illumine the signal light.
Recommended
Action
No action is required.
Is Supported Yes
10 GARP Messages
This section contains the entire system log messages related to GARP.
10.1 Wrong Protocol Id
Mnemonic Wrong Protocol Id Severity Level 3
Syslog Message The protocol Id is not 0x0001
Variable Fields $1: the output info
Explanation The value of protocol Id in GARP packet is invalid
Trigger Action Receive an invalid packet.
Example %Feb 21 08:43:21:187 2006 Quidway GARP/4/Wrong Protocol Id:
The protocol Id is not 0x0001
Recommended
Action
No action is required.
Is Supported Yes
10.2 Wrong message
Mnemonic Wrong message Severity Level 3
Syslog Message The message is wrong
Variable Fields
Explanation The value of attribute type in GARP packet is invalid
Trigger Action Receive an invalid packet.
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Wrong message:
The message is wrong
Recommended
Action
No action is required.
Is Supported Yes
10.3 Valid Msg
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page54, Total 176
Mnemonic Valid Msg Severity Level 3
Syslog Message The message parsing was successful
Variable Fields
Explanation The message in GARP packet is valid.
Trigger Action Receive a valid packet
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Valid Msg:
The message parsing was successful
Recommended
Action
No action is required.
Is Supported Yes
10.4 Wrong Msg
Mnemonic Wrong Msg Severity Level 3
Syslog Message End of message found. The message parsing was NOT successful
Variable Fields
Explanation The message in GARP packet is invalid.
Trigger Action Receive an invalid packet.
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Wrong Msg:
End of message found. The message parsing was NOT successful
Recommended
Action
No action is required.
Is Supported Yes
10.5 Wrong Msg Length
Mnemonic Wrong Msg Length Severity Level 3
Syslog Message The message is wrong
Variable Fields
Explanation The value of attribute type in GARP packet is invalid.`
Trigger Action Receive an invalid packet.
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Wrong Msg
Length:The message is wrong
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page55, Total 176
10.6 Wrong attribute
Mnemonic Wrong attribute Severity Level 3
Syslog Message The attribute type is wrong
Variable Fields
Explanation The value of attribute type in GARP packet is invalid.
Trigger Action Receive an invalid packet.
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Wrong attribute:
The attribute type is wrong
Recommended
Action
No action is required.
Is Supported Yes
10.7 Add Entry To GID Failed
Mnemonic Add Entry To GID Failed Severity Level 3
Syslog Message Add entry to GVRP database failed
Variable Fields
Explanation GVRP database is full
Trigger Action Unknown error
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Add Entry To GID
Failed: Add entry to GVRP database failed
Recommended
Action
No action is required.
Is Supported Yes
10.8 Malloc Failed
Mnemonic Malloc Failed Severity Level 3
Syslog Message Failed to allocate memory
Variable Fields
Explanation System memory is insufficient
Trigger Action System memory is insufficient
Example %Feb 21 08:46:11:187 2006 Quidway GARP/4/ Malloc Failed:
Malloc Failed
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page56, Total 176
11 HTTPD Messages
This section contains the entire system log messages related to HTTPD .
11.1 Log
Mnemonic Log Severity Level 4
Syslog Message [string]
Variable Fields $1: the output info
Explanation This is a common print info and output the parameter info.
Trigger Action Disable HTTPD function or enable HTTPD function.
Example %Feb 21 16:02:45:375 2006 Quidway-wvrp HTTPD/5/Log:Stopped
HTTP server.
%Feb 21 16:03:14:641 2006 Quidway-wvrp HTTPD/5/Log:Starting
HTTP server.
Recommended
Action
No action is required.
Is Supported Yes
12 HWCM Messages
This section contains the entire system log messages related to HWCM.
12.1 EXIT Mnemonic EXIT Severity Level 4
Syslog Message exit from configure mode
Variable Fields
Explanation Exit from configure mode.
Trigger Action An user exits from configure mode.
Example %Feb 26 05:36:20:876 2006 6502 HWCM/5/EXIT: exit from
configure mode
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page57, Total 176
12.2 TRAPLOG Mnemonic TRAPLOG Severity Level 4
Syslog Message \r\n\t [oid] configure changed: \r\n\t
EventIndex=[integer],CommandSource=[integer],ConfigSource=[in
teger],ConfigDestination=[integer]
Variable Fields $1: OID
$2: Event index
$3: Command source
$4: Configuration source
$5: Configuration destination
Explanation Configuration is changed
Trigger Action Change configuration
Example %Feb 26 06:10:25:780 2006 6502 HWCM/5/TRAPLOG:
1.3.6.1.4.1.2011.10.2.4.2.1 configure changed:
EventIndex=13,CommandSource=1,ConfigSource=3,ConfigDestin
ation=2
Recommended
Action
No action is required.
Is Supported Yes
12.3 CCOPY Mnemonic CCOPY Severity Level 4
Syslog Message \r\n\t configuration copy: OptType=[integer], OptTime=[TIMETICK],
OptState=[integer], OptEndTime=[TIMETICK]
Variable Fields $1: Operation type
$2: Date and time
Explanation Copy configuration
Trigger Action Copy configuration
Example %Feb 26 06:38:24:733 2006 6502 HWCM/5/CCOPY:
configuration copy: OptType=6, OptTime=12,
OptState=2, OptEndTime=10682324
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page58, Total 176
13 IP Messages
This section contains the entire system log messages related to IP.
13.1 ReassError
Mnemonic ReassError Severity Level 4
Syslog Message The number of queues of reassemble is MAX!
Variable Fields None
Explanation The number of reassembling queues exceed the maximum(400
currently).
Trigger Action The number of reassembling queues exceeds 400.
Example %Apr 20 12:53:44:436 2006 SW7700 IP/4/ReassError: The
number of queues of reassemble is MAX!
Recommended
Action
This message Indicates that there are so many IP fragments in
the current traffic and the current reassmbling queus is beyond the
device’s specification. No action is required.
Is Supported Router only.
13.2 QueueFull
Mnemonic QueueFull Severity Level 4
Syslog Message The queue of reassemble is full!
Variable Fields None.
Explanation The IP packets in one reassembling queue exceed the
maximum(1000 currently).
Trigger Action The number of IP packets in one reassembling queue exceeds
1000.
Example %Apr 21 06:43:32:843 2006 SW7700 IP/4/QueueFull: The queue
of reassemble is full!
Recommended
Action
Indicate that there are too many IP fragments in one
reassmebling queue, which is beyond the device’s specification. No
action is required.
Is Supported Router only.
13.3 MSG
Mnemonic MSG Severity Level 5
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page59, Total 176
Syslog Message FIB: IPC queue is full
Variable Fields None.
Explanation On distributed devices such as 6500 series, the main board must
syncronize the own FIB to other I/O boards via IPC. This message
will occur when the IPC fails to send the FIB.
Trigger Action The IPC fails to send the FIB of main board.
Example %Apr 21 15:17:58 2006 Quidway S6506R IP/5/MSG: FIB: IPC
queue is full
Recommended
Action
No action is required, may check the reason of sending fail.
Is Supported No
13.4 MSG
Mnemonic MSG Severity Level 5
Syslog Message FIB: IPC resends : Slot = [ULONG]
Variable Fields $1: Slot/Board number.
Explanation IPC will resend the FIB which is failed to send to the board i last
time.
Trigger Action IPC sending failed.
Example %Apr 21 15:17:58 2006 Quidway S6506R IP/5/MSG: FIB: IPC
resends : Slot = 5
Recommended
Action
No action is required, may check the reason of sending fail.
Is Supported No
13.5 MSG
Mnemonic MSG Severity Level 5
Syslog Message FIB receives message type unknown
Variable Fields None.
Explanation FIB module received an unkonw message from IPC.
Trigger Action After sending FIB, IPC returned a message to FIB module, but the
message type is out of the types defined previously.
Example %Apr 21 15:17:58 2006 Quidway S6506R IP/5/MSG: FIB receives
message type unknown
Recommended No action is required, may check the IPC’s information.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page60, Total 176
Action
Is Supported No
13.6 MFC
Mnemonic MFC Severity Level 5
Syslog Message MFC SYNC ERR Slot [ULONG]
Variable Fields
Explanation
Trigger Action
Example
Recommended
Action
Is Supported Not support on all devices use COMWARE V3R2
14 L2INF Messages
This section contains the entire system log messages related to L2INF.
14.1 PORT LINK ST
Mnemonic PORT LINK ST Severity Level 5
Syslog Message [STRING]: is UP
Variable Fields $1:interface
Explanation Port status is change to link-up
Trigger Action Port link status change
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/38: is UP
Recommended
Action
No action is required.
Is Supported Yes
14.2 PORT LINK ST
Mnemonic PORT LINK ST Severity Level 5
Syslog Message [STRING]: is DOWN
Variable Fields $1:interface
Explanation Port link status change to link-down.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page61, Total 176
Trigger Action Port link status change
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/39: is DOWN
Recommended
Action
No action is required.
Is Supported Yes
14.3 VLANIF LINK
Mnemonic VLANIF LINK Severity Level 5
Syslog Message [STRING]: is UP
Variable Fields $1:VLAN interface
Explanation VLAN link status change to link-up.
Trigger Action VLAN link status change
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
Vlan-interface1: is UP
Recommended
Action
No action is required.
Is Supported Yes
14.4 VLANIF LINK
Mnemonic PORT LINK ST Severity Level 5
Syslog Message [STRING]: is DOWN
Variable Fields $1:VLAN interface
Explanation VLAN link status change to link-up.
Trigger Action VLAN link status change
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
Vlan-interface1: is DOWN
Recommended
Action
No action is required.
Is Supported Yes
14.5 PORT PHY TYP
Mnemonic PORT PHY TYP Severity Level 5
Syslog Message [STRING]: is [STRING]
Variable Fields $1:interface
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page62, Total 176
$2:interface type
Explanation Port physical type
Trigger Action Port physical type change
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/42: is 10_BASE_T
Recommended
Action
No action is required.
Is Supported Yes
14.6 PORT STATUS
Mnemonic PORT STATUS Severity Level 5
Syslog Message [STRING] has fault
Variable Fields $1:interface
Explanation Port status
Trigger Action This is something wrong with the port.
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/43: has fault
Recommended
Action
No action is required.
Is Supported Yes
14.7 PORT STATUS
Mnemonic PORT STATUS Severity Level 5
Syslog Message [STRING] becomes normal
Variable Fields $1:interface
Explanation Port status.
Trigger Action Port status is change to normal.
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/44: becomes normal
Recommended
Action
No action is required.
Is Supported Yes
14.8 PORT LOOPBAC
Mnemonic PORT LOOPBAC Severity Level 5
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page63, Total 176
Syslog Message [STRING]
Variable Fields NULL
Explanation Loopback test on port
Trigger Action This is something wrong with loopback test.
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
GigabitEthernet1/0/39: is DOWN
Recommended
Action
No action is required.
Is Supported Yes
14.9 PORT LOOPBAC
Mnemonic PORT LOOPBAC Severity Level 5
Syslog Message [STRING]
Variable Fields NULL
Explanation Loopback test on port
Trigger Action Loopback test on port is successful.
Example %Feb 5 05:35:05 2006 Quidway L2INF/2/PORT:
Loopback testing of interface GigabitEthernet1/0/3 is successed!
Recommended
Action
No action is required.
Is Supported Yes
14.10 PORT LOOPBAC
Mnemonic PORT LOOPBAC Severity Level 5
Syslog Message [STRING]
Variable Fields NULL
Explanation Loopback test on port
Trigger Action Loopback test on port is failed
Example %Feb 5 05:35:05 2006 Quidway L2INF/3/PORT:
Loopback testing of interface GigabitEthernet1/0/3 is failed!
Recommended
Action
No action is required.
Is Supported Yes
14.11 VOICE VLAN A
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page64, Total 176
Mnemonic VOICE VLAN A Severity Level 5
Syslog Message ACL set on port failed !\r\n[STRING]
Variable Fields $1:acl
Explanation Acl set on voice vlan port.
Trigger Action Acl set failed on voice vlan port.
Example %Feb 5 05:35:05 2006 Quidway L2INF/4/PORT:
ACL set on port failed !
Recommended
Action
No action is required.
Is Supported Yes
15 LACL Messages
This section contains the entire system log messages related to LACL.
15.1 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed.
Trigger Action Other conditions except existed items, hardware not supporting,
action error, acl error, conflicted action, unavailable resource and
register.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed!
Recommended
Action
No action is required.
Is Supported Yes
15.2 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Applying item has existed!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because the applying item has existed.
Trigger Action The applying item has existed.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page65, Total 176
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Applying item has existed!
Recommended
Action
No action is required.
Is Supported Yes
15.3 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Not support!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because the hardware does not support it
Trigger Action The hardware does not support the applying item.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Not supported on this
interface!
Recommended
Action
No action is required.
Is Supported Yes
15.4 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Action error!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because there is action error.
Trigger Action Action error occurs.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Reason: Action error!
Recommended
Action
No action is required.
Is Supported Yes
15.5 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: ACL error!
Variable Fields $1 the acl rule group number and sub rule number
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page66, Total 176
Explanation Applying acl group failed,because there is acl error.
Trigger Action Acl error occurs.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: ACL error!
Recommended
Action
No action is required.
Is Supported Yes
15.6 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Resource unavailable!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because resource is unavailable.
Trigger Action Resource is unavailable.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Resource unavailable!
Recommended
Action
No action is required.
Is Supported Yes
15.7 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Register unavailable!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because register is unavailabe.
Trigger Action Register is unavailable.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Register unavailable!
Recommended
Action
No action is required.
Is Supported Yes
15.8 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message Applying [STRING] failed! Reason: Action conflicts!
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page67, Total 176
Variable Fields $1 the acl rule group number and sub rule number
Explanation Applying acl group failed,because action conflicts.
Trigger Action Action conflicts.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/APPLYERR:Applying
ip-group 3001 rule 115 failed! Reason: Action conflicts!
Recommended
Action
No action is required.
Is Supported Yes
15.9 DELETEERR
Mnemonic DELETEERR Severity Level 1
Syslog Message Deleting [STRING] failed!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Deleting acl group failed.
Trigger Action Other conditions except hardware not supporting, action error and
inexistent item.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/DELETEERR:Deleting
ip-group 3001 rule 115 failed!
Recommended
Action
No action is required.
Is Supported Yes
15.10 DELETEERR
Mnemonic DELETEERR Severity Level 1
Syslog Message Deleting [STRING] failed! Reason: [STRING]
Variable Fields $1 the acl rule group number and sub rule number
$2 the reason of failure when apply acl rule
Explanation Deleting acl group failed, because the hardware does not support
it.
Trigger Action The hardware does not support the deleting item.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/DELETEERR:Deleting
ip-group 3001 rule 115 failed! Reason: Not supported on this
interface!
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page68, Total 176
Is Supported Yes
15.11 DELETEERR
Mnemonic DELETEERR Severity Level 1
Syslog Message Deleting [STRING] failed! Reason: Action error!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Deleting acl group failed, because there is action error.
Trigger Action Action error occurs.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/DELETEERR:Deleting
ip-group 3001 rule 115 failed! Reason: Action error!
Recommended
Action
No action is required.
Is Supported Yes
15.12 DELETEERR
Mnemonic DELETEERR Severity Level 1
Syslog Message Deleting [STRING] failed! Reason: Such item does not exist!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Deleting acl group failed, because the item does not exist.
Trigger Action The deleting item does not exist.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/DELETEERR:Applying
ip-group 3001 rule 115 failed! Reason: Such item does not exist!
Recommended
Action
No action is required.
Is Supported Yes
15.13 DELETED
Mnemonic DELETED Severity Level 1
Syslog Message [STRING] has been deleted!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Deleting acl group failed, because it has been deleted.
Trigger Action The deleting item has been deleted.
Example %Mar 12 18:06:00 2005 QX-S3050 LACL/2/DELETED:ip-group
3001 rule 115 has been deleted!
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page69, Total 176
Action
Is Supported Yes
16 LACP Messages
This section contains the entire system log messages related to LACP
16.1 PartnerNoLacp
Mnemonic PartnerNoLacp Severity Level
Syslog Message LACP is not enabled on the remote end of port [string].
Variable Fields $1: name of port
Explanation A LACP enabled port can't receive LACP message which sent from
the remote end of this port
Trigger Action A port which is set LACP enabled can't receive LACP message.
Example %Jan 1 22:08:31:076 2005 5500G-EI LAGG/3/PartnerNoLacp:- 1
-LACP is not enabled on the remote end of port
GigabitEthernet1/0/1.
Recommended
Action
No action is required.
Is Supported Yes
16.2 AggCreFail
Mnemonic AggCreFail Severity Level
Syslog Message Link aggregation group [ushort] becomes a non-load-sharing
aggregation: hardware doesn't support.
Variable Fields $1: the index of Link aggregation group
Explanation There is not enough hardware resources for load-sharing
aggregation.
Trigger Action There is not enough hardware resources for load-sharing
aggregation.
Example %Jan 1 22:08:31:076 2005 5500G-EI LAGG/3/AggCreFail:- 1
-Link aggregation group 2 becomes a non-load-sharing
aggregation :hardware doesn't support.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page70, Total 176
Is Supported Yes
16.3 AggCreFail
Mnemonic AggCreFail Severity Level
Syslog Message Link aggregation group [ushort] becomes a non-load-sharing
aggregation: creating aggregation failed.
Variable Fields $1: the index of Link aggregation group
Explanation Error occurred when setting a load-sharing aggregation to
hardware.
Trigger Action Error occurred when setting a load-sharing aggregation to
hardware.
Example %Jan 1 22:08:31:076 2005 5500G-EI LAGG/3/AggCreFail:- 1
-Link aggregation group 2 becomes a non-load-sharing
aggregation :creating aggregation failed.
Recommended
Action
No action is required.
Is Supported Yes
17 LQOS Messages
This section contains the entire system log messages related to LQOS
17.1 APPLYERR
Mnemonic APPLYERR Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted.
Trigger Action Other conditions except existed items,hardware not
supporting,action error,acl error,conflicted action,unavailable
resource and register
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/APPLYERR:ip-group
3001 rule 115 failed to apply and has been deleted!
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page71, Total 176
17.2 ADDEXIST
Mnemonic ADDEXIST Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: applying
item has existed!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted, because the
applying item has existed.
Trigger Action The applying item has been existed.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/NOTSUPPORT:
ip-group 3001 rule 115 failed to apply and has been deleted!
Reason: applying item has existed!
Recommended
Action
No action is required.
Is Supported Yes
17.3 NOTSUPPORT
Mnemonic NOTSUPPORT Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: not
support!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted,because the
hardware does not support it.
Trigger Action The hardware does not support the applying item.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/NOTSUPPORT:
ip-group 3001 rule 81 failed to apply and has been deleted!
Reason: not support!
Recommended
Action
No action is required.
Is Supported Yes
17.4 ACTIONERR
Mnemonic ACTIONERR Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: action
error!
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page72, Total 176
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted,because there is
action error.
Trigger Action Action error occurs.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/ACTIONERR:ip-group
3001 rule 81 failed to apply and has been deleted! Reason: action
error!
Recommended
Action
No action is required.
Is Supported Yes
17.5 ACLERR
Mnemonic ACLERR Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: ACL error!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted,because there is acl
error.
Trigger Action Acl error occurs.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/ACLERR:ip-group
3001 rule 81 failed to apply and has been deleted! Reason: ACL
error!
Recommended
Action
No action is required.
Is Supported Yes
17.6 RESOURCE
Mnemonic RESOURCE Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: resource
unavailable!
Variable Fields $1 the acl rule group number and sub rule number
$2 the reason of failure when apply acl rule for qos
Explanation Acl group failed to apply and has been deleted,because resource is
unavailable.
Trigger Action Resource is unavailable.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/RESOURCE:ip-group
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page73, Total 176
3001 rule 81 failed to apply and has been deleted! Reason:
resource unavailable!
Recommended
Action
No action is required.
Is Supported Yes
17.7 REGISTER
Mnemonic REGISTER Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: register
unavailable!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted,because register is
unavailable.
Trigger Action Register is unavailable.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/RESOURCE:ip-group
3001 rule 81 failed to apply and has been deleted! Reason: register
unavailable!
Recommended
Action
No action is required.
Is Supported Yes
17.8 CONFLICT
Mnemonic CONFLICT Severity Level 1
Syslog Message [STRING] failed to apply and has been deleted! Reason: action
conflicts!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to apply and has been deleted,because action
conflicts.
Trigger Action Action conflicts.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/CONFLICT:ip-group
3001 rule 81 failed to apply and has been deleted! Reason: action
conflicts!
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page74, Total 176
17.9 DELERR
Mnemonic DELERR Severity Level 1
Syslog Message deleting [STRING] failed!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to delete.
Trigger Action Other conditions except inexistent item.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/DELERR: deleting
ip-group 3001 rule 81 failed!
Recommended
Action
No action is required.
Is Supported Yes
17.10 NOTEXIST
Mnemonic NOTEXIST Severity Level 1
Syslog Message deleting [STRING] failed! Reason: deleting item does not exist!
Variable Fields $1 the acl rule group number and sub rule number
Explanation Acl group failed to delete,because the deleting item does not exist.
Trigger Action The deleting item does not exist.
Example %Mar 13 11:35:17 2005 QX-S3050 LQOS/2/NOTEXIST: deleting
ip-group 3001 rule 81 failed! Reason: deleting item does not exist!
Recommended
Action
No action is required.
Is Supported Yes
18 MSDP Messages
18.1 PEER_UPDOWN
Mnemonic PEER_UPDOWN Severity Level 5
Syslog Message [STRING]Start a session with the peer [STRING]
([STRING][STRING])
Variable Fields $1: The index of VRF.
$2: The address of peer.
$3: The filename that shows us the warning is in which file.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page75, Total 176
$4: The number of the line that shos us the warning comes from
which line in the file.
Explanation After the equipment has done some unexpected operations, it
shows what is wrong with the operation of the equipment.
Trigger Action Do some unexpected operations.
Example %Jan 1 01:37:58 2003 Quidway MSDP/5/PEER_UPDOWN: 0 Start
a session with the peer 10.2.2.2 .(G09862)
Recommended
Action
No action is required.
Is Supported Yes
18.2 PEER_UPDOWN
Mnemonic PEER_UPDOWN Severity Level 5
Syslog Message [STRING]Close a session with the peer [STRING]
([STRING][STRING])
Variable Fields $1: The index of VRF.
$2: The address of peer.
$3: The filename that shows us the warning is in which file.
$4: The number of the line that shos us the warning comes from
which line in the file.
Explanation After the equipment has done some unexpected operations, it
shows what is wrong with the operation of the equipment.
Trigger Action Do some unexpected operations.
Example %Jan 1 01:37:58 2003 Quidway MSDP/5/PEER_UPDOWN: 0
Close a session with the peer 10.2.2.2 .(G09862)
Recommended
Action
No action is required.
Is Supported Yes
18.3 SA_LIMIT
Mnemonic SA_LIMIT Severity Level 5
Syslog Message [STRING]RP: [STRING], SG Entry: ([STRING], [STRING]),
exceeded peer([STRING])'s SA-cache maximum: [STRING]
([STRING][STRING])
Variable Fields $1: The index of VRF.
$2: The address of the RP.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page76, Total 176
$3: The address of the source.
$4: The address of the group.
$5: The address of peer.
$5: The max number of the SA-cache.
$7: The filename that shows us the warning is in which file.
$8: The number of the line that shos us the warning comes from
which line in the file.
Explanation After the equipment has done some unexpected operations, it
shows what is wrong with the operation of the equipment.
Trigger Action Do some unexpected operations.
Example %Jan 1 01:37:58 2003 Quidway MSDP/5/SA_LIMIT: 0 RP:
10.1.1.1, SG Entry: (20.2.2.2, 225.3.3.3), exceeded
peer(10.2.2.2)'s SA-cache maximum: 5 (G09862)
Recommended
Action
No action is required.
Is Supported Yes
19 MSTP Messages
This section contains the entire system log messages related to MSTP.
19.1 STPSTART
Mnemonic STPSTART Severity Level 2
Syslog Message STP is now enabled on the device
Variable Fields
Explanation STP is now enabled on the device.
Trigger Action Configure the command “STP enable” on system view.
Example %Apr 12 13:50:22 2005 Quidway MSTP/3/STPSTART:
STP is now enabled on the device.
Recommended
Action
No action is required.
Is Supported Yes
19.2 STPSTOP
Mnemonic STPSTOP Severity Level 2
Syslog Message STP is now disabled on the device.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page77, Total 176
Variable Fields
Explanation The device stops running STP.
Trigger Action Configure the command “STP disable” on system view.
Example %Apr 12 13:50:15 2005 Quidway MSTP/3/STPSTOP:
STP is now disabled on the device.
Recommended
Action
No action is required.
Is Supported Yes
19.3 PFWD
Mnemonic PFWD Severity Level 2
Syslog Message Instance [ULONG]'s [STRING] has been set to forwarding state!
Variable Fields $ 1 Instance Identify
$ 2 Port name
Explanation One port of an instance was set to forwarding.
Trigger Action A port of an instance has been set to forwarding state
Example %Apr 12 13:49:37 2005 Quidway MSTP/3/PFWD:
Instance 0's Ethernet1/1 has been set to forwarding state!
Recommended
Action
Shutdown switch‘s port.
Is Supported No
19.4 PDISC
Mnemonic PDISC Severity Level 2
Syslog Message Instance [ULONG]'s [STRING] has been set to discarding state!
Variable Fields $ 1 Instance Identify
$ 2 Port name
Explanation A port of an instance has been set to discarding state
Trigger Action A port of an instance has been set to discarding state
Example %Apr 12 13:50:04 2005 Quidway MSTP/3/PDISC:
Instance 0's Ethernet1/1 has been set to discarding state!
Recommended
Action
Switch A connect to switch B by two ports, and switch A is root
switch in default state. Shutdown the port whose role is root, then
undo shutdown this port.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page78, Total 176
19.5 ROOT
Mnemonic ROOT Severity Level 2
Syslog Message We are not the root switch of the instance [ULONG]!,
Variable Fields $ 1 Instance Identify
Explanation The switch is not the root switch of the instance
Trigger Action Switch receives high priority BPDU
Example %Apr 27 20:29:22:920 2000 QX-S3020TP MSTP/3/ROOT:We are
not the root switch of the instance 0!
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Configure “Stp root primary” on switch B,then
Configure “Stp root primary” on switch B .,then the log message is
printed on switch B.
Is Supported Yes
19.6 IVBPDU
Mnemonic IVBPDU Severity Level 2
Syslog Message BPDU-Protection port [STRING] received BPDU packet!
Variable Fields $ 1 Interface name
Explanation BPDU-Protection port received BPDU packet.
Trigger Action BPDU-Protection port received BPDU packet.
Example %Apr 27 20:42:39:330 2000 QX-S3020TP MSTP/3/:
BPDU-Protection port Ethernet1/0/4 received BPDU packet!
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Configure “Stp Bpdu-protection” on switch B,then
Configure “Stp edged-port enable” on switch B ‘s one port .
Is Supported Yes
19.7 RGSUP
Mnemonic RGSUP Severity Level 2
Syslog Message Instance [ULONG]'s ROOT-Protection port [STRING] received
superior message!
Variable Fields $ 1 Instance Identify
$ 2 Interface name
Explanation ROOT-Protection port received superior message.
Trigger Action ROOT-Protection port received superior message.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page79, Total 176
Example %Apr 27 11:45:32:283 2000 com5 MSTP/3/:Instance0's
ROOT-Protection port Ethernet1/0/2 received superior message!
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Configure “Stp root-protection” on switch A’s port,
then Configure “Stp root primary” on switch B.
Is Supported Yes
19.8 LGEXP
Mnemonic LGEXP Severity Level 2
Syslog Message Instance [ULONG]'s LOOP-Protection port [STRING] did not
receive message!
Variable Fields $ 1 Instance Identify
$ 2 Port name
Explanation LOOP-Protection port did not receive message.
Trigger Action LOOP-Protection port did not receive message.
Example %Apr 27 20:51:20:84 2000 QX-S3020TP MSTP/3/ Instance
[ULONG]'s LOOP-Protection port [STRING] did not receive
message!
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Configure “Stp loop-protecton” on switch B’s
port .then configure “stp disable” on switch A’s port.
Is Supported Yes
19.9 UNSUPPORT
Mnemonic UNSUPPORT Severity Level 2
Syslog Message Multiple instances of MSTP is not supported on board [ULONG]!
Variable Fields S1 the index of board
Explanation The board does not support multiple instances
Trigger Action Insert board which does not support multiple instances.
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/UNSUPPORT:
Multiple instances of MSTP is not supported on board 1!
Recommended
Action
Insert a board which does not support multiple instances.
Is Supported Yes
19.10 PSTPDISA
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page80, Total 176
Mnemonic PSTPDISA Severity Level 2
Syslog Message Can not enable STP on Port [STRING] which is VlanVpn-enabled
port!
Variable Fields $1 Interface name
Explanation Can not enable STP for configure conflict
Trigger Action Enale tunnel STP then configure STP enable on one port.
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/PSTPDISA:
Can not enable STP on Port Ethernet1/1 which is
VlanVpn-enabled port!
Recommended
Action
Enale tunneal stp then configure stp enable on one port.
Is Supported Yes
19.11 MIRRORSTPDISA
Mnemonic MIRRORSTPDISA Severity Level 2
Syslog Message Can not enable/disable STP on Port [STRING] which is
monitor-port or reflector-port!
Variable Fields $1 Interface name
Explanation Can not enable/disable STP on Port which is monitor-port or
reflector-port
Trigger Action Can not enable/disable STP on Port which is monitor-port or
reflector-port.
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/ MIRRORSTPDISA:
Can not enable/disable STP on Port Ethernet1/1 which is
monitor-port or reflector-port!
Recommended
Action
No action is required.
Is Supported Yes
19.12 QUEFILL
Mnemonic QUEFILL Severity Level 2
Syslog Message MstpMsgQue is full!
Variable Fields
Explanation MstpMsgQue is full
Trigger Action MstpMsgQue is full
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page81, Total 176
Example %Apr 12 13:50:22 2005 Quidway MSTP/3/QUEFILL:
MstpMsgQue is full!
Recommended
Action
No action is required.
Is Supported Yes
19.13 EVENTERROR
Mnemonic EVENTERROR Severity Level 2
Syslog Message Write message fail !
Variable Fields
Explanation Write message fail
Trigger Action Write message fail
Example %Apr 12 13:50:22 2005 Quidway MSTP/3/EVENTERROR:
Write message fail !
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Swicth B send legacy format BPDU.configure ‘Stp
compliance dot1s’ on switch A’s port ,then configure ‘Stp compliance
legacy’ on switch A’s port
Is Supported Yes
19.14 AGEDOUT
Mnemonic AGEDOUT Severity Level 2
Syslog Message The stp info of Instance [ULONG]'s [STRING] has aged out!
Variable Fields $1 the index of mstp instance
$2 name of port
Explanation The stp info of a port of an instance has aged out
Trigger Action The stp info of a port of an instance has aged out
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/AGEDOUT:
The stp info of Instance0's Ethernet1/1 has aged out!
Recommended
Action
Switch A connect to switch B by two ports, switch A is root switch in
default state. Swicth B send legacy format BPDU.configure ‘Stp
compliance dot1s’ on switch A’s port ,then configure ‘Stp compliance
legacy’ on switch A’s port
Is Supported Yes
19.15 FORMATERR
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page82, Total 176
Mnemonic FORMATERR Severity Level 2
Syslog Message Port [STRING] received different format of BPDU packets
continually! Shut down it in order to avoid broadcast
Variable Fields $1 name of port
Explanation Port received different format of BPDU packets continually
Trigger Action Port received different format of BPDU packets continually
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/FORMATERR:
Port Ethernet1/1 received different format of BPDU packets
continually! Shut down it in order to avoid broadcast
Recommended
Action
Shut down it in order to avoid broadcast
Is Supported Yes
19.16 FRMTINCMPGUARD
Mnemonic FRMTINCMPGUARD Severity Level 2
Syslog Message Instance [ULONG]'s INCOMPLIANCE-Protection port [STRING]
receive incompliant message!
Variable Fields $1 the index of mstp instance
$2 name of port
Explanation Instance's INCOMPLIANCE-Protection port receive incompliant
message
Trigger Action Instance's INCOMPLIANCE-Protection port receive incompliant
message
Example %Apr 12 14:36:55 2005 Quidway MSTP/3/FRMTINCMPGUARD:
Instance's INCOMPLIANCE-Protection port Ethernet1/1 receive
incompliant message!
Recommended
Action
No action is required.
Is Supported Yes
20 NDP Messages
20.1 NDPSTART
Mnemonic NDPSTART Severity Level 3
Syslog Message The device starts running NDP now.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page83, Total 176
Variable Fields
Explanation The NDP is enable.
Trigger Action When The NDP status is from disable to enable.
Example %Apr 27 16:35:47:200 2000 Quidway NDP/3/NDPSTART:The device
starts running NDP now.
Recommended
Action
No action is required.
Is Supported Yes
20.2 NDPSTOP
Mnemonic NDPSTOP Severity Level 3
Syslog Message The device stops running NDP now.
Variable Fields
Explanation The NDP is disable.
Trigger Action When The NDP status is from enable to disable.
Example %Apr 27 16:35:26:500 2000 Quidway NDP/3/NDPSTOP:The device
stops running NDP now.
Recommended
Action
No action is required.
Is Supported Yes
21 NTDP Messages
21.1 NTDPSTART
Mnemonic NTDPSTART Severity Level 3
Syslog Message The device starts running NTDP now.
Variable Fields
Explanation The NTDP is enable.
Trigger Action When The NTDP status is from disable to enable.
Example %Apr 27 16:33:36:121 2000 Quidway NTDP/3/NTDPSTART:The
device starts running NTDP now.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page84, Total 176
21.2 NTDPSTOP
Mnemonic NTDPSTOP Severity Level 5
Syslog Message The device stops running NTDP now.
Variable Fields
Explanation The NTDP is disable.
Trigger Action When The NTDP status is from enable to disable.
Example %Apr 27 16:32:19:334 2000 Quidway NTDP/3/NTDPSTOP:The
device stops running NTDP now.
Recommended
Action
No action is required.
Is Supported Yes
22 NTP Messages
This section contains the entire system log messages related to NTP.
22.1 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation system.leap = 0 means no warning
Trigger Action System Clock was synchronized
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
System leap changes from 3 to 0 after clock update.
Recommended
Action
No action is required.
Is Supported Yes
22.2 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation the changing of System stratum.
Trigger Action System Clock was synchronized
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page85, Total 176
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
System stratum changes from 16 to 2 after clock update.
Recommended
Action
No action is required.
Is Supported Yes
22.3 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation the max number of configed authkeys is 1024 in the system
Trigger Action the number of configed authkeys exceed 1024
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
Too many authkeys.
Recommended
Action
No action is required.
Is Supported Yes
22.4 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation the error happens when ntp get system time
Trigger Action system clock error
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
In step systime process,the function GetSystemTime fails.
Recommended
Action
No action is required.
Is Supported Yes
22.5 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation the fail of setting system clock
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page86, Total 176
Trigger Action the time of setting system clock is more early than 2000
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
In step systime process,the function SetSystemTime fails.
Recommended
Action
No action is required.
Is Supported Yes
22.6 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation the number of NTP associations must less than 128
Trigger Action the number of NTP associations must more than 128
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
Too many peers!
Recommended
Action
No action is required.
Is Supported Yes
22.7 NTP_LOG
Mnemonic NTP_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output information
Explanation System unsynchronized
Trigger Action can not connect the NTP server
Example %Jan 5 02:35:41:346 2003 Quidway NTP/5/NTP_LOG:
System synchronization source lost!
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page87, Total 176
23 OADP Messages
This section contains the entire system log messages related to OADP.
23.1 OADPSTART
Mnemonic OADPSTART Severity Level 3
Syslog Message The device starts running OADP now.
Variable Fields None.
Explanation Indicate that OADP is enabled correctly and going to run on device.
Trigger Action User input oadp enable command string at system view.
Example %Apr 20 10:53:21:577 2006 SW7700 OADP/3/OADPSTART:- 1 -
The device starts running OADP now
Recommended
Action
No action is required.
Is Supported Only support s5600 series for NEC.
23.2 OADPSTOP
Mnemonic OADPSTOP Severity Level 3
Syslog Message The device stops running OADP now
Variable Fields None.
Explanation Indicate that OADP is disabled correctly.
Trigger Action User input undo oadp enable command string at system view.
Example %Jan 1 01:37:58 2003 Quidway RMON/6/DELINFO:Alarm table
is invalidated a row with index 15 by cl.
Recommended
Action
No action is required.
Is Supported Only support s5600 series for NEC.
23.3 CDPSTART
Mnemonic CDPSTART Severity Level 3
Syslog Message The device starts running CDP now.
Variable Fields None.
Explanation Indicate that CDP is enabled correctly and going to run on device.
Trigger Action User input cdp enable command string at system view.
Example %Apr 20 10:54:03:858 2006 SW7700 OADP/3/CDPSTART:- 1 -
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page88, Total 176
The device starts running CDP now.
Recommended
Action
No action is required.
Is Supported Only support s5600 series for NEC.
23.4 CDPSTOP
Mnemonic CDPSTOP Severity Level 3
Syslog Message The device stops running CDP now.
Variable Fields None.
Explanation Indicate that CDP is disabled correctly.
Trigger Action User input undo cdp enable command string at system view.
Example %Apr 20 10:54:14:749 2006 SW7700 OADP/3/CDPSTOP:- 1 - The
device stops running CDP now.
Recommended
Action
No action is required.
Is Supported Only support s5600 series for NEC.
24 PKI Messages
This section contains the entire system log messages related to PKI.
24.1 Local_Cert_Retrieval
Mnemonic Local_Cert_Retrieval Severity Level 4
Syslog Message Retrieval local certificate of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation The local certificate is retrieved successfully.
Trigger Action The local certificate is retrieved successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/
Local_Cert_Retrieval:Retrieval local certificate of the domain
ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.2 Local_Cert_Retrieval
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page89, Total 176
Mnemonic Local_Cert_Retrieval Severity Level 4
Syslog Message Fail to retrieval local certificate of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to retrieve the local certificate.
Trigger Action Fail to retrieve the local certificate.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/
Local_Cert_Retrieval:Fail to retrieval local certificate of the domain
ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.3 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message Retrieval CA certificates of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation The CA certificate is retrieved successfully.
Trigger Action The CA certificate is retrieved successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
Retrieval CA certificates of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.4 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message Fail to retrieval CA certificates of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to retrieve CA certificates.
Trigger Action Fail to retrieve CA certificates.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
Fail to retrieval CA certificates of the domain ar29pki.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page90, Total 176
Is Supported Yes
24.5 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message CA certificates of the domain [String] have been existed.
Variable Fields $1: The name of PKI domain
Explanation CA certificates of this domain have been existed.
Trigger Action CA certificates of this domain have been existed.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
CA certificates of the domain ar29pki have been existed.
Recommended
Action
No action is required.
Is Supported Yes
24.6 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message CA certificates of the domain [String] error.
Variable Fields $1: The name of PKI domain
Explanation There are errors in CA certificates.
Trigger Action There are errors in CA certificates.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
CA certificates of the domain ar29pki error.
Recommended
Action
No action is required.
Is Supported Yes
24.7 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message No root certificate of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation There is not root certificate of this domain.
Trigger Action There is not root certificate of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
No root certificate of the domain ar29pki.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page91, Total 176
Recommended
Action
No action is required.
Is Supported Yes
24.8 CA_Cert_Retrieval
Mnemonic CA_Cert_Retrieval Severity Level 4
Syslog Message Root certificate of the domain [String] error.
Variable Fields $1: The name of PKI domain
Explanation Root certificate of this domain is wrong
Trigger Action Root certificate of this domain is wrong.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ CA_Cert_Retrieval:
Root certificate of the domain ar29pki error.
Recommended
Action
No action is required.
Is Supported Yes
24.9 Local_Cert_Request
Mnemonic Local_Cert_Request Severity Level 4
Syslog Message Request local certificate of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Request local certificate of this domain successfully.
Trigger Action Request local certificate of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Local_Cert_Request:
Request local certificate of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.10 Local_Cert_Request
Mnemonic Local_Cert_Request Severity Level 4
Syslog Message Fail to request local certificate of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to request local certificate of this domain.
Trigger Action Fail to request local certificate of this domain.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page92, Total 176
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Local_Cert_Request:
Fail to request local certificate of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.11 Local_Cert_Request
Mnemonic Local_Cert_Request Severity Level 4
Syslog Message Local certificate of the domain [String] has been existed.
Variable Fields $1: The name of PKI domain
Explanation Local certificate of this domain has been existed.
Trigger Action Local certificate of this domain has been existed.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Local_Cert_Request:
Local certificate of the domain ar29pki has been existed.
Recommended
Action
No action is required.
Is Supported Yes
24.12 Import_Cert_File
Mnemonic Import_Cert_File Severity Level 4
Syslog Message Fail to import certificate file of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain.
Trigger Action Fail to import CA certificates of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Cert_File:
Fail to import certificate file of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.13 Import_Local_Cert
Mnemonic Import_Local_Cert Severity Level 4
Syslog Message Import local certificate of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page93, Total 176
Explanation Import local certificate of this domain successfully.
Trigger Action Import local certificate of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Cert:
Import local certificate of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.14 Import_Local_Cert
Mnemonic Import_Local_Cert Severity Level 4
Syslog Message Fail to import local certificate of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to import local certificate of this domain.
Trigger Action Fail to import local certificate of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Cert:
Fail to import local certificate of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.15 Import_Local_Cert
Mnemonic Import_Local_Cert Severity Level 4
Syslog Message Fail to import local certificate of the domain [String] because of BIO
malloc fail.
Variable Fields $1: The name of PKI domain
Explanation Fail to import local certificate of this domain because of BIO malloc
fail.
Trigger Action Fail to import local certificate of this domain because of BIO malloc
fail.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Cert:
Fail to import local certificate of the domain ar29pki because of BIO
malloc fail.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page94, Total 176
Is Supported Yes
24.16 Import_Local_Cert
Mnemonic Import_Local_Cert Severity Level 4
Syslog Message Fail to import domain [String] local certificate, no certificate in file.
Variable Fields $1: The name of PKI domain
Explanation Fail to import this domain’s local certificate for no certificate in file.
Trigger Action Fail to import this domain’s local certificate for no certificate in file.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Cert:
Fail to import domain ar29pki local certificate, no certificate in file.
Recommended
Action
No action is required.
Is Supported Yes
24.17 Import_Local_Cert
Mnemonic Import_Local_Cert Severity Level 4
Syslog Message Certificate and entity do not match.
Variable Fields $1: The name of PKI domain
Explanation Certificate and entity do not match.
Trigger Action Certificate and entity do not match.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Cert:
Certificate and entity do not match.
Recommended
Action
No action is required.
Is Supported Yes
24.18 Import_Local_Key
Mnemonic Import_Local_Key Severity Level 4
Syslog Message Import local private key of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Import local private key of this domain successfully.
Trigger Action Import local private key of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Key:
Import local private key of the domain ar29pki successfully.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page95, Total 176
Recommended
Action
No action is required.
Is Supported Yes
24.19 Import_Local_Key
Mnemonic Import_Local_Key Severity Level 4
Syslog Message Failed to import local private key of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Failed to import local private key of this domain.
Trigger Action Failed to import local private key of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_Local_Key:
Failed to import local private key of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.20 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Import CA certificates of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Import CA certificates of this domain successfully.
Trigger Action Import CA certificates of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Import CA certificates of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.21 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page96, Total 176
Trigger Action Fail to import CA certificates of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.22 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of
malloc fail.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of memory
allocation failure.
Trigger Action Fail to import CA certificates of this domain because of memory
allocation failure.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of
malloc fail.
Recommended
Action
No action is required.
Is Supported Yes
24.23 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of
password fail.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of password
failure.
Trigger Action Fail to import CA certificates of this domain because of password
failure.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of
password fail.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page97, Total 176
Recommended
Action
No action is required.
Is Supported Yes
24.24 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of
parse fail.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of parse
failure.
Trigger Action Fail to import CA certificates of this domain because of parse
failure.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of
parse fail.
Recommended
Action
No action is required.
Is Supported Yes
24.25 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of no
root certificate.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of no root
certificate.
Trigger Action Fail to import CA certificates of this domain because of no root
certificate.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of No
root certificate.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page98, Total 176
24.26 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of root
certificate error.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of root
certificate error.
Trigger Action Fail to import CA certificates of this domain because of root
certificate error.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of root
certificate error.
Recommended
Action
No action is required.
Is Supported Yes
24.27 Import_CA_Cert
Mnemonic Import_CA_Cert Severity Level 4
Syslog Message Fail to import CA certificates of the domain [String] because of
certficate chain error.
Variable Fields $1: The name of PKI domain
Explanation Fail to import CA certificates of this domain because of certficate
chain error.
Trigger Action Fail to import CA certificates of this domain because of certficate
chain error.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Import_CA_Cert:
Fail to import CA certificates of the domain ar29pki because of
certficate chain error.
Recommended
Action
No action is required.
Is Supported Yes
24.28 Update_CA_Cert
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page99, Total 176
Mnemonic Update_CA_Cert Severity Level 4
Syslog Message Update CA certificates of the Domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Update CA certificates of this domain successfully.
Trigger Action Update CA certificates of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Update_CA_Cert:
Update CA certificates of the Domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.29 Update_CA_Cert
Mnemonic Update_CA_Cert Severity Level 4
Syslog Message Fail to update CA certificates of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to update CA certificates of this domain.
Trigger Action Fail to update CA certificates of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Update_CA_Cert:
Fail to update CA certificates of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.30 Delete_CA_Cert
Mnemonic Delete_CA_Cert Severity Level 4
Syslog Message Delete CA certificates of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Delete CA certificates of this domain successfully.
Trigger Action Delete CA certificates of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Delete_CA_Cert:
Delete CA certificates of the domain ar29pki successfully.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page100, Total
176
Is Supported Yes
24.31 Delete_CA_Cert
Mnemonic Delete_CA_Cert Severity Level 4
Syslog Message Fail to delete CA certificates of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to delete CA certificates of this domain.
Trigger Action Fail to delete CA certificates of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Delete_CA_Cert:
Fail to delete CA certificates of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.32 Delete_CA_Cert
Mnemonic Delete_CA_Cert Severity Level 4
Syslog Message CA certificate of the domain [String] is not exist.
Variable Fields $1: The name of PKI domain
Explanation CA certificate of this domain does not exist.
Trigger Action CA certificate of this domain does not exist.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Delete_CA_Cert:
CA certificate of the domain ar29pki is not exist.
Recommended
Action
No action is required.
Is Supported Yes
24.33 Delete_Local_Cert
Mnemonic Delete_Local_Cert Severity Level 4
Syslog Message Delete local certificate of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Delete local certificate of this domain successfully.
Trigger Action Delete local certificate of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Delete_Local_Cert:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page101, Total
176
Delete local certificate of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.34 Delete_Local_Cert
Mnemonic Delete_Local_Cert Severity Level 4
Syslog Message Fail to delete local certificate of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to delete local certificate of this domain.
Trigger Action Fail to delete local certificate of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Delete_Local_Cert:
Fail to delete local certificate of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.35 Verify_Cert
Mnemonic Verify_Cert Severity Level 4
Syslog Message Verify certificate [String] of the domain [String] successfully.
Variable Fields $1: The subject name of certificate
$2: The name of PKI domain
Explanation Verify certificate of this domain successfully.
Trigger Action Verify certificate of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Verify_Cert:
Verify certificate cn=kkk, o = h3, cn=cn of the domain ar29pki
successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.36 Verify_Cert
Mnemonic Verify_Cert Severity Level 4
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page102, Total
176
Syslog Message Fail to verify certificate [String] of the domain [String].
Variable Fields $1: The subject name of certificate
$2: The name of PKI domain
Explanation Fail to verify certificate of the domain.
Trigger Action Fail to verify certificate of the domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Verify_Cert:
Fail to verify certificate cn=kkk, o = h3, cn=cn of the domain
ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.37 Verify_CA_Root_Cert
Mnemonic Verify_CA_Root_Cert Severity Level 4
Syslog Message CA root certificate of the domain [String] is trusted.
Variable Fields $1: The name of PKI domain
Explanation CA root certificate of this domain is trusted.
Trigger Action CA root certificate of this domain is trusted.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/
Verify_CA_Root_Cert: CA root certificate of the domain ar29pki is
trusted.
Recommended
Action
No action is required.
Is Supported Yes
24.38 Verify_CA_Root_Cert
Mnemonic Verify_CA_Root_Cert Severity Level 4
Syslog Message CA root certificate of the domain [String] is not trusted.
Variable Fields $1: The name of PKI domain
Explanation CA root certificate of this domain is not trusted.
Trigger Action CA root certificate of this domain is not trusted.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/
Verify_CA_Root_Cert: CA root certificate of the domain ar29pki is
not trusted.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page103, Total
176
Recommended
Action
No action is required.
Is Supported Yes
24.39 Retrieval_CRL
Mnemonic Retrieval_CRL Severity Level 4
Syslog Message Retrieval CRL of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Retrieve CRL of this domain successfully.
Trigger Action Retrieve CRL of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Retrieval_CRL:
Retrieval CRL of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.40 Retrieval_CRL
Mnemonic Retrieval_CRL Severity Level 4
Syslog Message Fail to retrieval CRL of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to retrieve CRL of this domain.
Trigger Action Fail to retrieve CRL of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Retrieval_CRL: Fail
to retrieval CRL of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.41 Update_CRL
Mnemonic Update_CRL Severity Level 4
Syslog Message Update CRL of the domain [String] successfully.
Variable Fields $1: The name of PKI domain
Explanation Update CRL of this domain successfully.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page104, Total
176
Trigger Action Update CRL of this domain successfully.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Update_CRL: Update
CRL of the domain ar29pki successfully.
Recommended
Action
No action is required.
Is Supported Yes
24.42 Update_CRL
Mnemonic Update_CRL Severity Level 4
Syslog Message Fail to update CRL of the domain [String].
Variable Fields $1: The name of PKI domain
Explanation Fail to update CRL of this domain.
Trigger Action Fail to update CRL of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Update_CRL: Fail to
update CRL of the domain ar29pki.
Recommended
Action
No action is required.
Is Supported Yes
24.43 Update_CRL
Mnemonic Update_CRL Severity Level 4
Syslog Message Update crl of the domain [String] failure.
Variable Fields $1: The name of PKI domain
Explanation Fail to update CRL of this domain.
Trigger Action Fail to update CRL of this domain.
Example %Jan 5 16:13:13:120 2006 AR29-41 PKI/5/ Update_CRL: Update
crl of the domain ar29pki failure.
Is Supported Yes
25 RDS Messages
This section contains the entire system log messages related to RDS.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page105, Total
176
25.1 LOGIN
Mnemonic LOGIN Severity Level 6
Syslog Message [STRING] from Port=[STRING] Vlan=[ULONG] MAC=[STRING]
IP=[IPADDR] sent authentication request
Variable Fields $1: The user name
$2: The port number
$3: The VLAN ID
$4: The MAC address
$5: The IP address
Explanation Receive a new authentication request
Trigger Action Receive a new authentication request
Example %2005/1/5 06:31:15:345 5500G-EI SHELL/5/LOGIN:- 1 – test
from(192.168.44.1) sent authentication request
Recommended
Action
No action is required.
Is Supported Yes
25.2 LOGIN
Mnemonic LOGIN Severity Level 6
Syslog Message [STRING] from Port=[STRING] Vlan=[ULONG] MAC=[STRING]
IP=[IPADDR] failed to be online for [STRING]
Variable Fields $1: The user name
$2: The port number
$3: The VLAN ID
$4: The MAC address
$5: The IP address
$6:The cause of the failure
Explanation A new user has failed to log in.
Trigger Action A new user has failed to log in
Example %2005/1/5 06:31:19:345 5500G-EI SHELL/5/LOGIN:- 1 – test
from(192.168.44.1) failed to be online for timeout.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page106, Total
176
25.3 LOGIN
Mnemonic LOGIN Severity Level 6
Syslog Message [STRING] from Port=[STRING] Vlan=[ULONG] MAC=[STRING]
IP=[IPADDR] succeeded to be online
Variable Fields $1: The user name
$2: The port number
$3: The VLAN ID
$4: The MAC address
$5: The IP address
Explanation A new user logs in successfully.
Trigger Action A new user logs in successfully.
Example %2005/1/5 06:31:20:345 5500G-EI SHELL/5/LOGIN:- 1 – test
from(192.168.44.1) succeeded to be online.
Recommended
Action
No action is required.
Is Supported Yes
25.4 LOGIN
Mnemonic LOGIN Severity Level 6
Syslog Message [STRING] from Port=[STRING] Vlan=[ULONG] MAC=[STRING]
IP=[IPADDR] quit for [STRING]
Variable Fields $1: The user name
$2: The port number
$3: The VLAN ID
$4: The MAC address
$5: The IP address
$6:The cause of the quit
Explanation A user quits system for some reasons
Trigger Action A user quits system
Example %2005/1/5 06:31:25:345 5500G-EI SHELL/5/LOGIN:- 1 – test
from(192.168.44.1) quit for timeout.
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page107, Total
176
Is Supported Yes
26 RM Messages
This section contains the entire system log messages related to RM.
26.1 RTLOG
Mnemonic RTLOG Severity Level 1
Syslog Message Failed to create RTPRO CMO queue.
Variable Fields
Explanation Failed to create RTPRO CMO queue.
Trigger Action Route mengment con’t create RTPRO CMO queue.
Example %Jan 1 01:27:05 2003 Quidway RM/1/RTLOG: Failed to create
RTPRO CMO queue.
Recommended
Action
No action is required.
Is Supported Yes
26.2 RTLOG
Mnemonic RTLOG Severity Level 1
Syslog Message Unknown CMO message [ULONG] received.
Variable Fields $1:the value of OID
Explanation Unknown CMO message
Trigger Action RM detect unknown CMO message
Example %Apr 8 03:35:18:289 2006 Quidway RM/1/RTLOG: Unknown
CMO message 1078 received.
Recommended
Action
No action is required.
Is Supported Yes
26.3 RTLOG
Mnemonic RTLOG Severity Level 1
Syslog Message Failed to create RTPRO CMO response message.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page108, Total
176
Variable Fields
Explanation Failed to create RTPRO CMO response message.
Trigger Action Failed to create RTPRO CMO response message.
Example %Apr 8 03:35:18:289 2006 Quidway RM/1/RTLOG: Failed to
create RTPRO CMO response message.
Recommended
Action
No action is required.
Is Supported Yes
26.4 RTLOG
Mnemonic RTLOG Severity Level 3
Syslog Message rtpro malloc: Can not allocate([ULONG] bytes) for [STRING]
Variable Fields $1:the size of allocated memory
$2:the task name
Explanation Fail to allocate memory
Trigger Action RM Can not allocate memory for some bytes.
Example %Apr 8 03:35:18:289 2006 Quidway RM/3/RTLOG: Can not
allocate(512 bytes) for BGP
Recommended
Action
No action is required.
Is Supported Yes
26.5 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message inet_init: Invalid martian entry at [STRING]/[STRING]
Variable Fields $1:the destation of martian entry
$2:the mask of martian entry
Explanation Invalid martian entry
Trigger Action Invalid martian entry
Example %Apr 8 03:35:18:289 2006 Quidway RM/5/RTLOG: inet_init:
Invalid martian entry at 1.1.1.0/24
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page109, Total
176
26.6 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message task_addr_local return [LONG]
Variable Fields $1:the rerurn value
Explanation When setting local socket address, ask_addr_local reutn one cost.
Trigger Action Set local socket address.
Example %Jan 10 03:31:45:351 2006 Quidway RM/5/RTLOG:
task_addr_local return 3.
Recommended
Action
No action is required.
Is Supported Yes
26.7 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message Que is full!
Variable Fields
Explanation Queen is full.
Trigger Action Queen is full
Example %Jan 11 10:49:43:151 2006 Quidway RM/5/RTLOG:
Que is full!
Recommended
Action
No action is required.
Is Supported Yes
26.8 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message rt_free:[STRING]/[ULONG] ([STRING])
Variable Fields $1:the string of log information by the ip address of the dest.
$2: the mask length
$3:the vrf name
Explanation free
Trigger Action Delete one route entry.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page110, Total
176
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
rt_free:1.1.1.1/32(vpna)
Recommended
Action
No action is required.
Is Supported Yes
26.9 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message rt_table:[STRING]. The number of routes has exceeded the
configured route limit!
Variable Fields $1:the vrf name
Explanation The number of routes has exceeded the configured route limit.
Trigger Action The number of routes has exceeded the configured route limit
Example %Jan 17 08:41:45:351 2006 Quidway RM/5/RTLOG:
rt_table:[vpnb]. The number of routes has exceeded the
configured route limit!
Recommended
Action
No action is required.
Is Supported Yes
26.10 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message rt_table:[STRING], its routes are over the configured
threshold_routes, but are still less than the max volume ! Still
adding routes into the table.
Variable Fields $1:the vrf name
Explanation The vrf’s its routes are over the configured threshold_routes, but
are still less than the max volume. RM still add routes into the table.
Trigger Action The vrf’s its routes are over the configured threshold_routes, but
are still less than the max volume.
Example %Jan 17 02:51:35:791 2006 Quidway RM/5/RTLOG:
rt_table:vpn1, its routes are over the configured
threshold_routes, but are still less than the max volume !
Still adding routes into the table.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page111, Total
176
Recommended
Action
No action is required.
Is Supported Yes
26.11 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message rt_table:[STRING], its routes are over the configured max
volume ! Not adding routes into the table.
Variable Fields $1:the vrf name
Explanation Its routes are over the configured max volume ! Not adding routes
into the table.
Trigger Action its routes are over the configured max volume !
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
rt_table:vpn2, its routes are over the configured max volume !
Not adding routes into the table.
Recommended
Action
No action is required.
Is Supported Yes
26.12 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] peer update(default_route): send msg error, error
code [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2: the error code
Explanation BGP finds an error
Trigger Action BGP peer is shutdown
Example %Jan 10 03:31:45:351 2006 Quidway RM/5/RTLOG:
bgp BGP_200 peer update(default_route): send msg error, error
code 5.
Recommended
Action
No action is required.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page112, Total
176
26.13 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message Bgp [STRING] send notify code: [ULONG] subcode: [ULONG]
Variable Fields $1:the string of log information by bgp-peer name
$2: the error code
$3:the sub error code
Explanation BGP finds an error
Trigger Action BGP peer is shutdown
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
Bgp BGP_100 send notify code: 3 subcode: 2
Recommended
Action
No action is required.
Is Supported No
26.14 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp peer [STRING] peer AS [ULONG]: AddRouts: [ULONG]
DelRouts: [ULONG]
TotalAddRouts: [ULONG] TotalDelRouts: [ULONG] InputUpdates:
[ULONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the AS number
$3:the number of added routes
$4:the number of deleted routes
$5:the total number of added routes
$6:the total number of deleted routes
$7:the number of input-updated routes
Explanation Count the received BGP routers
Trigger Action NULL
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp peer BGP_100 peer AS 200: AddRouts: 32
DelRouts: 10
TotalAddRouts: 40
TotalDelRouts: 20
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page113, Total
176
InputUpdates: 50
Recommended
Action
No action is required.
Is Supported No
26.15 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bnp [STRING] read msg socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP read the msg sochet
Trigger Action Deal with the massage
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bnp BGP_100 read msg socket return: -1
Recommended
Action
No action is required.
Is Supported No
26.16 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp_read_message
Variable Fields NULL
Explanation BGP read a message.
Trigger Action BGP receive a message.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp_read_message
Recommended
Action
No action is required.
Is Supported No
26.17 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp recv notify msg from bgp peer [STRING]
Variable Fields $1:the string of log information by bgp-peer name
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page114, Total
176
Explanation BGP receive notify message form bgp-peer.
Trigger Action BGP receive notify message.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp recv notify msg from bgp peer BGP_100
Recommended
Action
No action is required.
Is Supported No
26.18 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp: peer [STRING]: received short version [LONG] message
Variable Fields $1:the string of log information by bgp-peer name
$2:the version of the BGP
Explanation BGP received short someone version message
Trigger Action BGP receive a message.
Example %Jan 11 10:23:23:231 2006 Quidway RM/5/RTLOG:
bgp: peer BGP_100: received short version 3 message
Recommended
Action
No action is required.
Is Supported No
26.19 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp: peer [STRING] receive invalid multi-protocol capability length
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP received invalid multi-protocol capability length.
Trigger Action Connect again.
Example %Jan 11 21:21:42:212 2006 Quidway RM/5/RTLOG:
bgp: peer BGP_100 receive invalid multi-protocol capability
length
Recommended
Action
No action is required.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page115, Total
176
26.20 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] receive invalid route refresh cap len
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP received invalid route refresh cap length.
Trigger Action NULL
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 receive invalid route refresh cap len
Recommended
Action
No action is required.
Is Supported No
26.21 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp_get_open
Variable Fields
Explanation BGP_gets_open massage.
Trigger Action BGP will deal with the massage.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp_get_open
Recommended
Action
No action is required.
Is Supported No
26.22 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] get_open
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP_gets_open massage.
Trigger Action BGP will deal with the massage.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 get_open
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page116, Total
176
Recommended
Action
No action is required.
Is Supported No
26.23 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv_open
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP_received_open massage.
Trigger Action BGP will deal with the massage.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv_open
Recommended
Action
No action is required.
Is Supported No
26.24 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv_open: local version < recved version
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP received_an open massage: local version < recved version
Trigger Action BGP will deal with the massage.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bgp BGP_101 recv_open: local version < recved version
Recommended
Action
No action is required.
Is Supported No
26.25 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] send keepalive failed, send msg socket
return:[LONG]
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page117, Total
176
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP failed to send keepalive message.
Trigger Action BGP failed to send keepalive message.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 send keepalive failed, send msg socket return:0
Recommended
Action
No action is required.
Is Supported No
26.26 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp_recv_open: peer [STRING] accepted mismatched version: his
[LONG] mine [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the version of the bgp-peer.
$3:the version of the location
Explanation BGP received an open massage.
Trigger Action BGP will deal with the massage.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp_recv_open: peer BGP_100 accepted mismatched version:
his 4 mine 3
Recommended
Action
No action is required.
Is Supported No
26.27 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp_pp_recv: connection collision close the bpp
Variable Fields NULL
Explanation BGP’s connection is close.
Trigger Action Reconnect again
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page118, Total
176
bgp_pp_recv: connection collision close the bpp
Recommended
Action
No action is required.
Is Supported No
26.28 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp_pp_recv
Variable Fields
Explanation BGP pp received function is called
Trigger Action Deal with this process.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bgp_pp_recv
Recommended
Action
No action is required.
Is Supported No
26.29 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv error refresh
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP receive error refresh message.
Trigger Action BGP receive error refresh message.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv error refresh
Recommended
Action
No action is required.
Is Supported No
26.30 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] sending withdraw routes failed when responding to
route refresh, socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page119, Total
176
$2:the return value
Explanation BGP failed to send withdraw routes when responding to route
refresh.
Trigger Action BGP failed to send withdraw routes.
Example %Jan 11 09:41:45:351 2006 Quidway RM/5/RTLOG:
bgp BGP_100 sending withdraw routes failed when responding
to route refresh, socket return: 2
Recommended
Action
No action is required.
Is Supported No
26.31 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp cfg confederation nonstandard-compatible
Variable Fields
Explanation BGP configures confederation nonstandard-compatible
Trigger Action NULL
Example %Jan 10 17:18:04:610 2006 Quidway RM/5/RTLOG:
bgp cfg confederation nonstandard-compatible
Recommended
Action
No action is required.
Is Supported No
26.32 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp cfg confed id
Variable Fields
Explanation BGP configured the confed id
Trigger Action NULL
Example %Jan 11 10:43:33:201 2006 Quidway RM/5/RTLOG:
bgp cfg confed id
Recommended
Action
No action is required.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page120, Total
176
26.33 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp cfg confed peers
Variable Fields
Explanation BGP configured the confed peers
Trigger Action NULL
Example %Jan 17 02:51:35:791 2006 Quidway RM/5/RTLOG:
bgp cfg confed peers
Recommended
Action
No action is required.
Is Supported No
26.34 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp cfg peer group(ASSIGNING MEMBERS)
Variable Fields
Explanation BGP configured the peer group(ASSIGNING MEMBERS)
Trigger Action NULL
Example %Jan 11 10:43:33:201 2006 Quidway RM/5/RTLOG:
bgp cfg peer group(ASSIGNING MEMBERS)
Recommended
Action
No action is required.
Is Supported No
26.35 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp cfg neighbor route-reflector-client
Variable Fields
Explanation BGP configured the neighbor route-reflector-client
Trigger Action NULL
Example %Jan 17 08:41:45:351 2006 Quidway RM/5/RTLOG:
bgp cfg neighbor route-reflector-client
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page121, Total
176
Action
Is Supported No
26.36 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message Vpnbgp [STRING] send routes failed, socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation Vpnbgp failed to send routes message.
Trigger Action Vpnbgp failed to send routes message.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
Vpnbgp BGP_VPN_INS_100 send routes failed, socket return: 1
Recommended
Action
No action is required.
Is Supported No
26.37 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] send open failed, send msg socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP sent open failed,
Trigger Action NULL
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 send open failed, send msg socket return: 0
Recommended
Action
No action is required.
Is Supported No
26.38 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] can not find the interface with updatesource ifname
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP can not find the interface with updatesource ifname.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page122, Total
176
Trigger Action BGP can not find the interface with updatesource ifname.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp %s can not find the interface with updatesource ifname
task_addr_local return 1
Recommended
Action
No action is required.
Is Supported No
26.39 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] task_connect return EINPROGRESS
task_get_addr_local socket return [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP task_connect is error.
Trigger Action Close the peer,and reconnect
Example %Jan 11 10:43:33:201 2006 Quidway RM/5/RTLOG:
bgp BGP_100 task_connect return EINPROGRESS
task_get_addr_local socket return 2
Recommended
Action
No action is required.
Is Supported No
26.40 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] bgp_ifachange
Variable Fields $1:the string of log information by bgp-peer name
Explanation The interface is changed.
Trigger Action BGP will deal with the action.
Example %Jan 17 08:41:45:351 2006 Quidway RM/5/RTLOG:
bgp BGP_100 bgp_ifachange
Recommended
Action
No action is required.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page123, Total
176
26.41 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] bgp_ifachange, bnp->bgp_state: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the state of the bgp-peer
Explanation The interface is changed.
Trigger Action BGP will deal with the action.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 bgp_ifachange, bnp->bgp_state: 4
Recommended
Action
No action is required.
Is Supported No
26.42 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp: peer [STRING] (in state [LONG]) is closed in bgp_ifvchange()
due to virtual-link change
Variable Fields $1:the string of log information by bgp-peer name
$2:the state of the bgp-peer
Explanation BGP is closed in bgp_ifvchange() due to virtual-link change
Trigger Action Close the peer.
Example %Jan 11 10:49:43:151 2006 Quidway RM/5/RTLOG:
bgp: peer BGP_100 (in state 5) is closed in bgp_ifvchange() due
to virtual-link change
Recommended
Action
No action is required.
Is Supported No
26.43 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] terminate
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP peer is terminated
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page124, Total
176
Trigger Action Close the peer.
Example %Jan 11 12:41:49:232 2006 Quidway RM/5/RTLOG:
bgp BGP_100 terminate
Recommended
Action
No action is required.
Is Supported No
26.44 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] terminate bgp state: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the state of the bgp-peer
Explanation BGP peer is terminated when peer’s state is .
Trigger Action Close the peer
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bgp BGP_100 terminate bgp state: 4
Recommended
Action
No action is required.
Is Supported No
26.45 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp peer [STRING] delete
Variable Fields $1:the string of log information by bgp-peer name
Explanation Delete the BGP peer
Trigger Action NULL
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp peer BGP_100 delete
Recommended
Action
No action is required.
Is Supported No
26.46 RTLOG
Mnemonic RTLOG Severity Level 5
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page125, Total
176
Syslog Message bgp [STRING] send Msg fail, socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP failed to send message.
Trigger Action BGP failed to send message.
Example %Jan 11 21:21:42:212 2006 Quidway RM/5/RTLOG:
bgp BGP_100 send Msg fail, socket return: 1
Recommended
Action
No action is required.
Is Supported No
26.47 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv msg fail socket return: [LONG]
Variable Fields $1:the string of log information by bgp-peer name
$2:the return value
Explanation BGP failed to receive message.
Trigger Action BGP failed to receive message.
Example %Jan 17 02:51:35:791 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv msg fail socket return: 0
Recommended
Action
No action is required.
Is Supported No
26.48 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv keepalive
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP received keepalive message.
Trigger Action BGP received keepalive message.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv keepalive
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page126, Total
176
Is Supported No
26.49 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv notify
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP received the notification massage.
Trigger Action Close BGP peer and deal with the massage.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv notify
Recommended
Action
No action is required.
Is Supported No
26.50 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message bgp [STRING] recv update len too small
Variable Fields $1:the string of log information by bgp-peer name
Explanation BGP receive update message of which length is too small.
Trigger Action BGP receive update message of which length is too small.
Example %Jan 11 10:43:33:201 2006 Quidway RM/5/RTLOG:
bgp BGP_100 recv update len too small
Recommended
Action
No action is required.
Is Supported No
26.51 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message ISIS: Exceed maximum circuits once!
Variable Fields $1:the string of log information by the interface name
Explanation Exceed maximum circuits for ISIS.
Trigger Action Enable ISIS on interface.
Example %Jan 11 11:48:23:101 2006 Quidway RM/5/RTLOG:
ISIS: Exceed maximum circuits once!
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page127, Total
176
Recommended
Action
No action is required.
Is Supported NO
26.52 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message ISIS-ADJCHANGE:Adjacency To [STRING] ([STRING])
UP/DOWN/INIT, [STRING]
Variable Fields $1:the string of log information by Network Entry Title
$2:string of log information by the interface name
$3:string of log information by showing the log message
Explanation The adjacency change state.
Trigger Action The adjacency change state.
Example %Jan 10 17:18:04:610 2006 Quidway ISIS/5/ADJLOG:
ISIS-ADJCHANGE: Adjacency To cccc.cccc.cccc (Ethernet0/0)
UP , New Level-1 Adjacency
Recommended
Action
No action is required.
Is Supported NO
26.53 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message ISIS Warning: LSP [STRING] dropped
Variable Fields $1:the string of information by the isis LSP
Explanation LSP of ISIS has been dropped.
Trigger Action ISIS received wrong LSP.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
ISIS Warning: LSP whose lspid is x dropped
Recommended
Action
No action is required.
Is Supported NO
26.54 RTLOG
Mnemonic RTLOG Severity Level 5
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page128, Total
176
Syslog Message ISIS Warning: Ignore Area Addresses TLV (1) in non-zero LSP
[STRING]
Variable Fields $1:the string of information by the isis LSP
Explanation Ignore Area Addresses TLV (1) in non-zero LSP.
Trigger Action ISIS received non-zero LSP that has Area Addresses TLV.
Example %Jan 11 10:43:33:201 2006 Quidway RM/5/RTLOG:
ISIS Warning: Ignore Area Addresses TLV (1) in non-zero LSP
whose lspid is x
Recommended
Action
No action is required.
Is Supported NO
26.55 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message OSPF [STRING] last neighbor down event
Variable Fields $1:the string of information by the ospf number
Explanation One last neighbor ‘state change to down for OSPF
Trigger Action One last neighbor ‘state change to down for OSPF
Example %Jan 11 12:41:49:232 2006 Quidway RM/5/RTLOG:
OSPF 1 last neighbor down event
Recommended
Action
No action is required.
Is Supported Yes
26.56 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message OSPF Neighbor State Change:[STRING]->[STRING] Router
Id:[STRING] Local Addr:[STRING] Nbr ID:[STRING]Nbr
Addr:{STRING]
Variable Fields %1:the state of the ospf-neighbor.
%2:the state of the ospf-neighbor.
%3:the ID of the local ospf-router.
%4:the ip-address of the local ospf-router..
%5:the ID of the ospf-neighbor.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page129, Total
176
%6:the ip-address of the ospf-neighbor.
Explanation The ospf neighbor state change form high state to low state.
Trigger Action Receive some bad packets.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
OSPF Neighbor State Change:Exchange->Down Router
Id:1.1.1.1 Local Addr:10.1.1.1 Nbr ID:2.2.2.2 Nbr Addr:20.1.1.1
Recommended
Action
No action is required.
Is Supported Yes
26.57 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message ASE Export DB_WHERE(db) != ON_NSSA_LIST
Variable Fields
Explanation The nssa lsa is not a self-originated lsa.
Trigger Action When the router generate the nssa lsa of itself, the lsdb has been a
nssa lsa of the same route. But it is not a self-originated lsa..
Example %Jan 11 12:41:49:232 2006 Quidway RM/5/RTLOG:
ASE Export DB_WHERE(db) != ON_NSSA_LIST
Recommended
Action
No action is required.
Is Supported Yes
26.58 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message ASE Export DB_WHERE(db) != ON_ASE_LIST
Variable Fields
Explanation The ase lsa is not a self-originated lsa.
Trigger Action When the router generate the ase lsa of itself, the lsdb has been a
ase lsa of the same route. But it is not a self-originated lsa.
Example %Jan 11 12:41:49:232 2006 Quidway RM/5/RTLOG:
ASE Export DB_WHERE(db) != ON_ASE_LIST
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page130, Total
176
Is Supported Yes
26.59 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message Too many OSPF router LSAs to run SPF for Area [STRING]
Variable Fields $1: the ospf-area ip-address
Explanation Too many OSPF router LSAs to run SPF for an area.
Trigger Action The number of router lsas of the area is lager than the max limit.
Example %Jan 17 08:51:43:851 2006 Quidway RM/5/RTLOG:
Too many OSPF router LSAs to run SPF for Area 0.0.0.1
Recommended
Action
No action is required.
Is Supported Yes
26.60 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message OSPF [ULONG] last neighbor down event: ROUTER ID:
[ULONG].[ULONG].[ULONG].[ULONG] LOCAL ADDRESS:
[ULONG].[ULONG].[ULONG].[ULONG] REMOTE ADDRESS:
[ULONG].[ULONG].[ULONG].[ULONG].REASON: [STRING]
Variable Fields $1:the OSPF process ID
$2.$3.$4.$5: the local router's ip-address
$6.$7.$8.$9: the remote router's ip-address
$10:the string of log information by the neighbour which is down
Explanation Record the imformation of OSPF last neighbor down event.
Trigger Action OSPF neighbor has been down.
Example %Jan 11 09:41:45:351 2006 Quidway RM/5/RTLOG:
OSPF 1 last neighbor down event: ROUTER ID: 10.10.2.2
LOCAL ADDRESS:192.168.2.10 REMOTE ADDRESS:
192.168.2.20 REASON: Receive error hello packet on PtP
interface.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page131, Total
176
26.61 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message OSPF: The MTU of interface [STRING] is too small.
Variable Fields $1:the string of log information by the interface name
Explanation The MTU of one interface is too small for OSPF.
Trigger Action The MTU of one interface change to small.
Example %Jan 11 21:21:42:212 2006 Quidway RM/5/RTLOG:
OSPF: The MTU of interface ATM1/0 is too small.
Recommended
Action
No action is required.
Is Supported Yes
26.62 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message Process [LONG]'s router id has been changed.
Variable Fields $1:the OSPF process ID
Explanation One process’s router id for has been changed.
Trigger Action Router id has been changed.
Example %Jan 10 06:51:29:421 2006 Quidway RM/5/RTLOG:
OSPF: Process 1's router id has been changed.
OSPF: Reboot the system or use the 'reset ospf process ID'
command
for this to take effect.
Recommended
Action
No action is required.
Is Supported Yes
26.63 RTLOG
Mnemonic RTLOG Severity Level 5
Syslog Message RIP: Exceed maximum of RIP sending routes!
Variable Fields
Explanation Exceed maximum of RIP sending routes.
Trigger Action Exceed maximum of RIP sending routes.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page132, Total
176
Example %Jan 11 10:23:23:231 2006 Quidway RM/5/RTLOG:
RIP: Exceed maximum of RIP sending routes!
Recommended
Action
No action is required.
Is Supported Yes
27 RMON Messages
This section contains the entire system log messages related to RMON.
27.1 ADDINFO
Mnemonic ADDINFO Severity Level 6
Syslog Message [STRING] table is added a valid row with index [ULONG] by
[STRING]
Variable Fields $1: The name of table.
$2: An index that uniquely identifies an entry in the alarm table.
$3: The entity that configured this entry and is therefore using the
resources assigned to it.
Explanation A new entry has been added into alarm table successfully.
Trigger Action Add a new entry into alarm table.
Example %Jan 1 01:27:05 2003 Quidway RMON/6/ADDINFO:Alarm table
is added a valid row with index 15 by cl
Recommended
Action
No action is required.
Is Supported Yes
27.2 DELINFO
Mnemonic DELINFO Severity Level 6
Syslog Message [STRING] table is invalidated a row with index [ULONG] by
[STRING]
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page133, Total
176
Variable Fields $1: The name of table.
$2: An index that uniquely identifies an entry in the alarm table.
$3: The entity that configured this entry and is therefore using the
resources assigned to it.
Explanation An existed entry has been removed from alarm table successfully.
Trigger Action Remove a existed entry from alarm table.
Example %Jan 1 01:37:58 2003 Quidway RMON/6/DELINFO:Alarm table
is invalidated a row with index 15 by cl.
Recommended
Action
No action is required.
Is Supported Yes
28 RSA Messages
This section contains the entire system log messages related to RSA.
28.1 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Create RSA host encryption key successfully.
Variable Fields
Explanation The RSA host encryption key is created successfully.
Trigger Action Create RSA host encryption key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Create RSA
host encryption key successfully.
Recommended
Action
No action is required.
Is Supported Yes
28.2 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Fail to create RSA host encryption key.
Variable Fields
Explanation The RSA host encryption key is created unsuccessfully.
Trigger Action Create RSA host encryption key
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page134, Total
176
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to
create RSA host encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.3 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Fail to save RSA host encryption key.
Variable Fields
Explanation The RSA host encryption key is not saved successfully.
Trigger Action Save RSA host encryption key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to save
RSA host encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.4 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Fail to backup RSA host encryption key.
Variable Fields
Explanation The RSA host encryption key is backuped unsuccessfully.
Trigger Action Backup RSA host encryption key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to
backup RSA host encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.5 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Create RSA server encryption key successfully.
Variable Fields
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page135, Total
176
Explanation The RSA server encryption key is created successfully.
Trigger Action Create RSA server encryption key.
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Create RSA
server encryption key successfully.
Recommended
Action
No action is required.
Is Supported Yes
28.6 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Fail to create RSA server encryption key.
Variable Fields
Explanation The RSA server encryption key is not created successfully.
Trigger Action Create RSA server encryption key.
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to
create RSA server encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.7 Key_create
Mnemonic Key_create Severity Level 4
Syslog Message Fail to save RSA server encryption key.
Variable Fields
Explanation The RSA server encryption key is not saved successfully.
Trigger Action Save RSA server encryption key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to save
RSA server encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.8 Key_create
Mnemonic Key_create Severity Level 4
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page136, Total
176
Syslog Message Fail to backup RSA server encryption key.
Variable Fields
Explanation The RSA server encryption key is not backuped successfully.
Trigger Action Backup RSA server encryption key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_create: Fail to
backup RSA server encryption key.
Recommended
Action
No action is required.
Is Supported Yes
28.9 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Destroy RSA host key successfully.
Variable Fields
Explanation The RSA host key is destroyed successfully.
Trigger Action Destroy RSA host key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy: Destroy
RSA host key successfully.
Recommended
Action
No action is required.
Is Supported Yes
28.10 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Success to destroy RSA host key in the main board, but fail to
destroy RSA host key in the salve board.
Variable Fields
Explanation The RSA host key in the main board is destroyed successfully, but
the RSA host key in the salve board is destroyed unsuccessfully.
Trigger Action Destroy RSA host key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy: Success to
destroy RSA host key in the main board, but fail to destroy RSA
host key in the salve board.
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page137, Total
176
Action
Is Supported Yes
28.11 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Fail to destroy RSA host keys.
Variable Fields
Explanation RSA host keys are not destroyed successfully.
Trigger Action Destroy RSA host key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy
: Fail to destroy RSA host keys.
Recommended
Action
No action is required.
Is Supported Yes
28.12 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Destroy RSA server key successfully.
Variable Fields
Explanation The RSA server key is destroyed successfully.
Trigger Action Destroy RSA server key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy: Destroy
RSA server key successfully.
Recommended
Action
No action is required.
Is Supported Yes
28.13 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Success to destroy RSA server key in the main board, but fail to
destroy RSA server key in the salve board.
Variable Fields
Explanation The RSA server key in the main board is destroyed successfully,
but the RSA server key in the salve board is destroyed
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page138, Total
176
unsuccessfully.
Trigger Action Destroy RSA server key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy: Success to
destroy RSA server key in the main board, but fail to destroy RSA
server key in the salve board."
Recommended
Action
No action is required.
Is Supported Yes
28.14 Key_destroy
Mnemonic Key_destroy Severity Level 4
Syslog Message Fail to destroy RSA server key.
Variable Fields
Explanation The RSA server key is not destroyed successfully.
Trigger Action Destroy RSA server key
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Key_destroy: Fail to
destroy RSA server key.
Recommended
Action
No action is required.
Is Supported Yes
28.15 Write_flash
Mnemonic Write_flash Severity Level 4
Syslog Message Fail to write flash.
Variable Fields
Explanation Fail to write data into flash.
Trigger Action Write data into flash.
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Write_flash:
Fail to write flash.
Recommended
Action
No action is required.
Is Supported Yes
28.16 Save_keys
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page139, Total
176
Mnemonic Save_keys Severity Level 4
Syslog Message Fail to open file when saving keys.
Variable Fields
Explanation When saving keys, it is unsuccessfully to open file.
Trigger Action Save keys into files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Save_keys: Fail to open
file when saving keys.
Recommended
Action
No action is required.
Is Supported Yes
28.17 Save_keys
Mnemonic Save_keys Severity Level 4
Syslog Message Fail to seek when saving keys.
Variable Fields
Explanation When saving keys, it is unsuccessfully to seek.
Trigger Action Save keys into files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Save_keys: Fail to seek
when saving keys.
Recommended
Action
No action is required.
Is Supported Yes
28.18 Save_keys
Mnemonic Save_keys Severity Level 4
Syslog Message Fail to write file when saving keys.
Variable Fields
Explanation When saving keys, it is unsuccessfully to write file.
Trigger Action Save keys into files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Save_keys: Fail to write
file when saving keys.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page140, Total
176
28.19 Save_keys
Mnemonic Save_keys Severity Level 4
Syslog Message Fail to close file when saving keys.
Variable Fields
Explanation When saving keys, it is unsuccessfully to close file.
Trigger Action Save keys into files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Save_keys: Fail to close
file when saving keys.
Recommended
Action
No action is required.
Is Supported Yes
28.20 Read_keys
Mnemonic Read_keys Severity Level 4
Syslog Message Fail to open file when reading keys.
Variable Fields
Explanation When reading keys, it is unsuccessfully to open file.
Trigger Action Read keys from files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Read_keys: Fail to open
file when reading keys.
Recommended
Action
No action is required.
Is Supported Yes
28.21 Read_keys
Mnemonic Read_keys Severity Level 4
Syslog Message Fail to seek when reading keys.
Variable Fields
Explanation When reading keys, it is unsuccessfully to seek.
Trigger Action Read keys from files
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Read_keys: Fail to seek
when reading keys.
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page141, Total
176
Action
Is Supported Yes
28.22 Read_keys
Mnemonic Read_keys Severity Level 4
Syslog Message Fail to read flash.
Variable Fields
Explanation It is unsuccessful to read flash.
Trigger Action Read keys from flash
Example %Jan 1 01:27:05 2003 Quidway RSA/5/ Read_keys: Fail to read
flash.
Recommended
Action
No action is required.
Is Supported Yes
28.23 Backup_Keys
Mnemonic Backup_Keys Severity Level 3
Syslog Message Fail to backup host public key.
Variable Fields
Explanation It is unsuccessful to backup host public key.
Trigger Action Backup host public key.
Example %Jan 1 01:27:05 2003 Quidway RSA/4/ Backup_Keys: Fail to
backup host public key.
Recommended
Action
No action is required.
ls Supported Yes
28.24 Backup_Keys
Mnemonic Backup_Keys Severity Level 3
Syslog Message Fail to backup server public key.
Variable Fields
Explanation It is unsuccessful to backup server public key.
Trigger Action Backup server public key.
Example %Jan 1 01:27:05 2003 Quidway RSA/4/ Backup_Keys: Fail to
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page142, Total
176
backup server public key.
Recommended
Action
No action is required.
Is Supported Yes
29 SHELL Messages
This section contains the entire system log messages related to EXEC.
29.1 LOGIN
Mnemonic LOGIN Severity Level 5
Syslog Message [string]([string]) in unit[ulong] login
Variable Fields $1: user name
$2: terminal type
$3: Unit ID
Explanation Terminal type and location of login users
Trigger Action Users login
Example %Mar 3 16:20:34 2005 Quidway SHELL/5/LOGIN:aaa(2.2.2.20)
in unit 1 login
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
29.2 LOGOUT
Mnemonic LOGOUT Severity Level 5
Syslog Message [string]([string]) in unit[ulong] logout
Variable Fields $1: user name
$2: terminal type
$3: Unit ID
Explanation Terminal type and location of logout users
Trigger Action Users logout
Example %Mar 3 16:20:34 2005 Quidway SHELL/5/LOGIN:aaa(2.2.2.20)
in unit 1 logout
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page143, Total
176
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
29.3 CMD
Mnemonic CMD Severity Level 5
Syslog Message task:[string] ip:[string] user:[string] command:[string]
Variable Fields $1: task name
$2: IP address
$3: user name
$4: command string
Explanation It shows users’ name, location, task name and commands users
executed
Trigger Action Users execute command
Example %Mar 3 16:20:34 2005 Quidway SHELL/5/CMD:task:au0 ip:**
user:aaa command:display logbuff
Recommended
Action
No action is required.
Is Supported Yes
29.4 SYN_ERROR
Mnemonic SYN_ERROR Severity Level 5
Syslog Message [string] synchronization failure from unit[ulong] to unit[ulong]
Variable Fields $1: terminal type
$2: unit ID of the source
$3: unit ID of the destination
Explanation It shows UI synchronizing failed
Trigger Action UI synchronizing failed
Example %Mar 3 16:20:34 2005 Quidway SHELL/5/SYN_ERROR:aux0
synchronization failure from unit2 to unit1
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page144, Total
176
29.5 SYN_ERROR
Mnemonic SYN_ERROR Severity Level 5
Syslog Message EXEC session creation failure:[string]
Variable Fields $1: failure string
Explanation It shows creating exec session failed in fabric
Trigger Action Exec session creating failed
Example %Mar 3 16:20:34 2005 Quidway SHELL/5/SYN_ERROR:EXEC
session creation failure:Task creation failed
Recommended
Action
No action is required.
Is Supported Yes when XRN is supported
30 SNMP Messages
This section contains the entire system log messages related to SNMP.
30.1 GET
Mnemonic GET Severity Level 4
Syslog Message \r\nseqNO = <[ulong]> srcIP = <[string]> op = <get> node =
<[string]> value = <[string]>\r\n
Variable Fields $1: The sequence number of GET request
$2: The source IP address of GET request
$3: The name of node in a GET request
$4: The value of node in a GET request
Explanation SNMP agent received a GET request
Trigger Action SNMP agent received a GET request
Example %Apr 18 15:12:39:157 2006 Quidway SNMP/5/GET:- 1 –
seqNO = <1> srcIP = <169.254.76.200> op = <get> node =
<sysUpTime(1.3.6.1.2.1.1.3.0)> value = <>
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page145, Total
176
30.2 SET
Mnemonic SET Severity Level 4
Syslog Message \r\nseqNO = <[ulong]> srcIP = <[string]> op = <set> errorIndex =
<[ulong]> errorStatus = <[ulong]> node = <[string]> value =
<[string]>\r\n
Variable Fields $1: The sequence number of SET request
$2: The source IP address of SET request
$3: The error index of variable-binding list
$4: The error status of variable-binding list
$5: The name of node in SET request
$6: The value of node in SET request
Explanation SNMP agent received a SET request
Trigger Action SNMP agent received a SET request
Example %Apr 18 15:14:28:440 2006 Quidway SNMP/5/SET:- 1 -
seqNO = <3> srcIP = <169.254.76.200> op = <set> errorIndex =
<0> errorStatus =<0> node = <sysName(1.3.6.1.2.1.1.5.0)> value
= <Quidway>
Recommended
Action
No action is required.
Is Supported Yes
31 SOCKET Messages
31.1 SOCKETLOG
Mnemonic SOCKETLOG Severity Level 4
Syslog Message [STRING]
Variable Fields $1: information
Explanation
Trigger Action No use
Example
Recommended
Action
No action is required.
Is Supported No
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page146, Total
176
31.2 TCP MD5
Mnemonic TCP MD5 Severity Level 4
Syslog Message Received TCP packet with invalid MD5 digest. SOURCE:[STRING]
FOREIGN:[STRING]
Variable Fields $1: source ip address
$2: destination ip address
Explanation Receive TCP packet with invalid MD5 digest
Trigger Action Receive a TCP packet
Example Received TCP packet with invalid MD5 digest. SOURCE:2.2.2.2
FOREIGN:3.3.3.3
Recommended
Action
No action is required.
Is Supported Yes
32 SSH Messages
This section contains the entire system log messages related to ssh.
32.1 ver_len_err
Mnemonic ver_len_err Severity Level 4
Syslog Message SSH version string length is greater than 256.
Variable Fields
Explanation The length of ssh version string is incorrect.
Trigger Action The length of ssh version string is greater than 256.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ ver_len_err: SSH version
string length is greater than 256.
Recommended
Action
Input correct version string.
Is Supported Yes
32.2 ver_major_err
Mnemonic ver_major_err Severity Level 4
Syslog Message Protocol major versions differ: [string] vs. [string]
Variable Fields $1: The local protocol major version.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page147, Total
176
$2: The remote protocol major version.
Explanation The major version is different.
Trigger Action Login with the major version other than $1.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ ver_major_err: Protocol
major versions differ: 1 vs 2.
Recommended
Action
Login with correct major version.
Is Supported Yes
32.3 ver_minor_err
Mnemonic ver_minor_err Severity Level 4
Syslog Message Protocol minor versions [string] is too old
Variable Fields $1: The remote protocol minor version.
Explanation The minor version is unsupported.
Trigger Action The minor version is smaller than 3.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ ver_minor_err: Protocol
minor versions 2 is too old.
Recommended
Action
Use the version between 3 and 5.
Is Supported Yes
32.4 ver_minor_unspt
Mnemonic ver_minor_unspt Severity Level 4
Syslog Message Protocol minor versions [string] is unsupported
Variable Fields $1: The remote version information.
Explanation The minor version is unsupported.
Trigger Action The minor version is bigger than 5.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ ver_minor_unspt:
Protocol minor versions 7 is unsupported
Recommended
Action
Use the version between 3 and 5.
Is Supported Yes
32.5 buf_len_zero
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page148, Total
176
Mnemonic buf_len_zero Severity Level 4
Syslog Message Sending buffer length is 0 in SSH_SendToSsh
Variable Fields
Explanation The length of buffer is 0.
Trigger Action The length of buffer is 0.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ buf_len_zero: Sending
buffer length is 0 in SSH_SendToSsh.
Recommended
Action
Assign correct buffer length.
Is Supported Yes
32.6 session_msg_err
Mnemonic session_msg_err Severity Level 4
Syslog Message Received unexpected packet instead of
SSH_CMSG_SESSION_KEY: [string]
Variable Fields $1: The name of session key.
Explanation The session key is incorrect.
Trigger Action The session key is not 3.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ session_msg_err:
Received unexpected packet instead of
SSH_CMSG_SESSION_KEY: 2.
Recommended
Action
Send correct session key.
Is Supported Yes
32.7 cipher_err
Mnemonic cipher_err Severity Level 4
Syslog Message Client chose unsupported cipher mask
Variable Fields
Explanation Server does not support the cipher mask.
Trigger Action Client chose unsupported cipher mask.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ cipher_err: Client chose
unsupported cipher mask
Recommended Choose supported cipher mask.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page149, Total
176
Action
Is Supported Yes
32.8 cookie_err
Mnemonic cookie_err Severity Level 4
Syslog Message Client's cookie is different from server's
Variable Fields
Explanation Client's cookie is different from server's.
Trigger Action Client's cookie is different from server's.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ cookie_err: Client's
cookie is different from server's
Recommended
Action
Send correct cookie.
Is Supported Yes
32.9 user_msg_err
Mnemonic user_msg_err Severity Level 4
Syslog Message Received unexpected packet instead of SSH_CMSG_USER
packet: [string]
Variable Fields $1: The name of the packet.
Explanation The packet is incorrect.
Trigger Action The packet is not SSH_CMSG_USER.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ user_msg_err: Received
unexpected packet instead of SSH_CMSG_USER packet:
SSH_CMSG_SESSION_KEY.
Recommended
Action
No action is required.
Is Supported Yes
32.10 auth_retryt_out
Mnemonic auth_retryt_out Severity Level 4
Syslog Message Too many authentication failures for user [string] on VTY [string]
Variable Fields $1: The name of user.
$2: The port of VTY.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page150, Total
176
Explanation Fail to authenticate.
Trigger Action Too many authentication failures.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ auth_retryt_out: Too
many authentication failures for user ssh-user on VTY 0.
Recommended
Action
No action is required.
Is Supported Yes
32.11 auth_msg_err
Mnemonic auth_msg_err Severity Level 4
Syslog Message Received unexpected packet on Authentication state: [string]
Variable Fields $1: The name of message type.
Explanation The message type is not authentication.
Trigger Action The message type is not authentication.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ auth_msg_err
: Received unexpected packet on Authentication state:
SSH_VERSION_SEND.
Recommended
Action
No action is required.
Is Supported Yes
32.12 passwd_len_err
Mnemonic passwd_len_err Severity Level 4
Syslog Message The password's length is greater than 16
Variable Fields
Explanation The length of password is incorrect.
Trigger Action The length of password is greater than 16
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ passwd_len_err: The
password's length is greater than 16
Recommended
Action
Input correct password.
Is Supported Yes
32.13 passwd_err
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page151, Total
176
Mnemonic passwd_err Severity Level 4
Syslog Message Wrong password offered by user [string] on VTY [string]
Variable Fields $1: The name of user.
$2: The port of VTY.
Explanation The password is wrong.
Trigger Action The password is wrong.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ passwd_err: Wrong
password offered by user ssh-user on VTY 0.
Recommended
Action
Input correct password.
Is Supported Yes
32.14 authrsa_msg_err
Mnemonic authrsa_msg_err Severity Level 4
Syslog Message Received unexpected packet instead of SSH_CMSG_AUTH_RSA
packet: [string]
Variable Fields $1: The name of the packet.
Explanation The message type is not SSH_CMSG_AUTH_RSA..
Trigger Action The message type is not SSH_CMSG_AUTH_RSA..
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ authrsa_msg_err:
Received unexpected packet instead of SSH_CMSG_AUTH_RSA
packet: SSH_CMSG_AUTH_PASSWORD.
Recommended
Action
No action is required.
Is Supported Yes
32.15 rsarspn_msg_err
Mnemonic rsarspn_msg_err Severity Level 4
Syslog Message Received unexpected packet instead of
SSH_CMSG_AUTH_RSA_RESPONSE packet: [string]
Variable Fields $1: The name of the packet.
Explanation The message type is not SSH_CMSG_AUTH_RSA_RESPONSE.
Trigger Action The message type is not SSH_CMSG_AUTH_RSA_RESPONSE.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsarspn_msg_err:
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page152, Total
176
Received unexpected packet instead of
SSH_CMSG_AUTH_RSA_RESPONSE packet:
SSH_CMSG_AUTH_PASSWORD
Recommended
Action
No action is required.
Is Supported Yes
32.16 challenge_err
Mnemonic challenge_err Severity Level 4
Syslog Message Client's MD5 challenge is different from the server's
Variable Fields
Explanation The MD5 challenge is wrong.
Trigger Action The MD5 challenge is wrong.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ challenge_err: Client's
MD5 challenge is different from the server's
Recommended
Action
Send correct MD5 challenge.
Is Supported Yes
32.17 getckey_err
Mnemonic getckey_err Severity Level 4
Syslog Message Can not get RSA peer keys from RSA module
Variable Fields
Explanation Fail to get RSA peer keys.
Trigger Action Fail to get RSA peer keys.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ getckey_err: Can not get
RSA peer keys from RSA module
Recommended
Action
No action is required.
Is Supported Yes
32.18 username_len_err
Mnemonic username_len_err Severity Level 4
Syslog Message The user name length is greater than 32
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page153, Total
176
Variable Fields
Explanation The length of user name is incorrect.
Trigger Action The length of user name is greater than 32.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/username_len_err: The
user name length is greater than 32
Recommended
Action
Input correct user name.
Is Supported Yes
32.19 user_not_exist
Mnemonic user_not_exist Severity Level 4
Syslog Message The user [string] doesn't exist
Variable Fields $1: The user name.
Explanation The user is illegal.
Trigger Action Input incorrect user name.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ user_not_exist: The user
www doesn't exist
Recommended
Action
Input correct user name.
Is Supported Yes
32.20 user_noauth
Mnemonic user_noauth Severity Level 4
Syslog Message No authentication type configured for the user [string]
Variable Fields $1: The user name.
Explanation The user is not configured completely.
Trigger Action Do not configure authentication type to the user.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ user_noauth: No
authentication type configured for the user www.
Recommended
Action
No action is required.
Is Supported Yes
32.21 rsa_n_err
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page154, Total
176
Mnemonic rsa_n_err Severity Level 4
Syslog Message The client sent a RSA-key-module-n which is unequal to the
server's
Variable Fields
Explanation The RSA-key-module-n is different form server’s.
Trigger Action The RSA-key-module-n is different form server’s.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsa_n_err: The client
sent a RSA-key-module-n which is unequal to the server's.
Recommended
Action
No action is required.
Is Supported Yes
32.22 fsm_move
Mnemonic fsm_move Severity Level 4
Syslog Message FSM MOVE FROM [string] TO [string]
Variable Fields $1: The name of fsm.
$2: The name of fsm.
Explanation The fsm will move.
Trigger Action The fsm will move.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ fsm_move: FSM MOVE
FROM SSH_Main_Connect TO SSH_Main_VersionMatch.
Recommended
Action
No action is required.
Is Supported Yes
32.23 err_dissconnect
Mnemonic err_dissconnect Severity Level 4
Syslog Message The connection is closed by SSH Server\r\nCurrent FSM is :
[string]
Variable Fields $1: The name of fsm.
Explanation Fail to connect.
Trigger Action Fail to connect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ err_dissconnect: The
connection is closed by SSH Server\r\nCurrent FSM is :
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page155, Total
176
. SSH_Main_VersionMatch.
Recommended
Action
No action is required.
ls Supported Yes
32.24 unexpected_msg
Mnemonic unexpected_msg Severity Level 4
Syslog Message [string] message received on VTY [string] is unexpected.
Variable Fields $1: The name of message.
$2: The port of VTY.
Explanation The message is wrong.
Trigger Action The message is wrong.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ unexpected_msg:
SSH_VERSION_SEND message received on VTY 0 is
unexpected.
Recommended
Action
No action is required.
Is Supported Yes
32.25 bad_cmd_length
Mnemonic bad_cmd_length Severity Level 4
Syslog Message The command in SSH_CMSG_EXEC_CMD is too long.
Variable Fields
Explanation The command is too long.
Trigger Action The command is too long.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bad_cmd_length: The
command in SSH_CMSG_EXEC_CMD is too long.
Recommended
Action
No action is required.
Is Supported Yes
32.26 msg_disconnect
Mnemonic msg_disconnect Severity Level 4
Syslog Message SSH_MSG_DISCONNECT received on VTY [string]
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page156, Total
176
Variable Fields $1: The port of VTY.
Explanation Fail to connect.
Trigger Action Fail to connect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_disconnect:
SSH_MSG_DISCONNECT received on VTY 0.
Recommended
Action
No action is required.
Is Supported Yes
32.27 bad_plaintext_length
Mnemonic bad_plaintext_length Severity Level 4
Syslog Message The plain text length is bad.
Variable Fields
Explanation The length of plain text is incorrect.
Trigger Action The length of plain text is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/bad_plaintext_length:
The plain text length is bad.
Recommended
Action
No action is required.
Is Supported Yes
32.28 bad_cryptograph_len
Mnemonic bad_cryptograph_len Severity Level 4
Syslog Message The cryptograph length is bad.
Variable Fields
Explanation The length of cryptograph is incorrect.
Trigger Action The length of cryptograph is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bad_cryptograph_len:
The cryptograph length is bad.
Recommended
Action
No action is required.
Is Supported Yes
32.29 bad_key_length
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page157, Total
176
Mnemonic bad_key_length Severity Level 4
Syslog Message The cipher key length is bad.
Variable Fields
Explanation The length of cipher key is incorrect.
Trigger Action The length of cipher key is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bad_key_length: The
cipher key length is bad.
Recommended
Action
No action is required.
Is Supported Yes
32.30 bad_iv_len
Mnemonic bad_iv_len Severity Level 4
Syslog Message The cipher iv length is bad.
Variable Fields
Explanation The length of cipher iv is incorrect.
Trigger Action The length of cipher iv is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bad_iv_len: The cipher iv
length is bad.
Recommended
Action
No action is required.
Is Supported Yes
32.31 bad_string_len
Mnemonic bad_string_len Severity Level 4
Syslog Message The string data length is greater than 2 * 1024.
Variable Fields
Explanation The length of string data is incorrect.
Trigger Action The length of string data is greater than 2 * 1024.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bad_string_len: The
string data length is greater than 2 * 1024.
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page158, Total
176
32.32 bignum_len_wrong
Mnemonic bignum_len_wrong Severity Level 4
Syslog Message The bignum data length is bad.
Variable Fields
Explanation The length of bignum data is incorrect.
Trigger Action The length of bignum data is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bignum_len_wrong: The
bignum data length is bad.
Recommended
Action
No action is required.
Is Supported Yes
32.33 bignum_not_full
Mnemonic bignum_not_full Severity Level 4
Syslog Message The bignum data is not full.
Variable Fields
Explanation The bignum data is incorrect.
Trigger Action The bignum data is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ bignum_not_full: The
bignum data is not full.
Recommended
Action
No action is required.
Is Supported Yes
32.34 unknown_cipher_type
Mnemonic unknown_cipher_type Severity Level 4
Syslog Message The cipher type is unknown.
Variable Fields
Explanation The ciphet type is unsupported.
Trigger Action The ciphet type is unsupported.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ unknown_cipher_type:
The cipher type is unknown.
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page159, Total
176
Action
Is Supported Yes
32.35 send_length_wrong
Mnemonic send_length_wrong Severity Level 4
Syslog Message The SSH packet length is wrong.
Variable Fields
Explanation The length of ssh packet is incorrect.
Trigger Action The length of ssh packet is smaller than 5 or bigger than 4 * 1024.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/DELINFO:
send_length_wrong
Recommended
Action
No action is required.
Is Supported Yes
32.36 send_buf_null
Mnemonic send_buf_null Severity Level 4
Syslog Message The SSH packet is empty.
Variable Fields
Explanation No message is to be sended.
Trigger Action The packet has no message.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ send_buf_null: The SSH
packet is empty.
Recommended
Action
No action is required.
Is Supported Yes
32.37 send_fail
Mnemonic send_fail Severity Level 4
Syslog Message Sending SSH message fails.
Variable Fields
Explanation Fail to send SSH message.
Trigger Action Fail to send SSH message.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/DELINFO: Sending SSH
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page160, Total
176
message fails.
Recommended
Action
No action is required.
Is Supported Yes
32.38 msg_length_slop
Mnemonic msg_length_slop Severity Level 4
Syslog Message SSH message length slops.
Variable Fields
Explanation The length of ssh message is incorrect.
Trigger Action The length of ssh message is smaller than 5 or bigger than 4 *
1024.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_length_slop: SSH
message length slops.
Recommended
Action
No action is required.
Is Supported Yes
32.39 read_length_wrong
Mnemonic read_length_wrong Severity Level 4
Syslog Message SSH message length is wrong.
Variable Fields
Explanation The length of ssh message is incorrect.
Trigger Action The length of ssh message is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ read_length_wrong:
SSH message length is wrong.
Recommended
Action
No action is required.
Is Supported Yes
32.40 read_crc_wrong
Mnemonic read_crc_wrong Severity Level 4
Syslog Message SSH message CRC is wrong.
Variable Fields
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page161, Total
176
Explanation Ssh message CRC is incorrect.
Trigger Action Ssh message CRC is incorrect.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ read_crc_wrong: SSH
message CRC is wrong.
Recommended
Action
No action is required.
Is Supported Yes
32.41 user_exist
Mnemonic user_exist Severity Level 4
Syslog Message AAA overwrites the current user!
Variable Fields
Explanation The current user has existed.
Trigger Action Creat a user which has existed.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ user_exist: AAA
overwrites the current user!
Recommended
Action
No action is required.
Is Supported Yes
32.42 add_success
Mnemonic add_success Severity Level 4
Syslog Message Add user successfully!
Variable Fields
Explanation Add an user successfully
Trigger Action Add an user successfully
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ add_success: Add user
successfully!
Recommended
Action
No action is required.
Is Supported Yes
32.43 del_success
Mnemonic del_success Severity Level 4
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page162, Total
176
Syslog Message Delete user successfully!
Variable Fields
Explanation Delete an user successfully
Trigger Action Delete an user successfully
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ del_success: Delete
user successfully!
Recommended
Action
No action is required.
Is Supported Yes
32.44 getkey_fail
Mnemonic getkey_fail Severity Level 4
Syslog Message Can't get the client's rsa-key, it may be destroyed by RSA module!
Variable Fields
Explanation Fail to get the client’s rsa-key.
Trigger Action Fail to get the client’s rsa-key.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ getkey_fail: Can't get the
client's rsa-key, it may be destroyed by RSA module!
Recommended
Action
No action is required.
Is Supported Yes
32.45 accept_err
Mnemonic accept_err Severity Level 4
Syslog Message Acceptting fails when listenning Socket [string]
Variable Fields $1: The socket descriptor.
Explanation Fail to accept.
Trigger Action Fail to accept.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ accept_err: Acceptting
fails when listenning Socket 2 .
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page163, Total
176
32.46 malloc_err
Mnemonic malloc_err Severity Level 4
Syslog Message Malloc error at [string]
Variable Fields $1: the type of memory
Explanation Fail to allocate memory.
Trigger Action Fail to allocate memory.
Example
Recommended
Action
No action is required.
Is Supported Yes
32.47 buf_get_wrong
Mnemonic buf_get_wrong Severity Level 4
Syslog Message Accessing buffer fails:
\r\nBuffer' length : [string]
\r\nBuffer' Offset : [string]
\r\nBuffer' End : [string]
Variable Fields $1: Buffer’ length.
$2: Buffer' Offset
$3: Buffer' End
Explanation Fail to access buffer.
Trigger Action Fail to access buffer.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ buf_get_wrong:
Accessing buffer fails:
\r\nBuffer' length : 0.
\r\nBuffer' Offset : 2.
\r\nBuffer' End : 3.
Recommended
Action
No action is required.
Is Supported Yes
32.48 des_setkey_fail
Mnemonic des_setkey_fail Severity Level 4
Syslog Message Setting des key fails on VTY [string]
Variable Fields $1: The port of VTY.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page164, Total
176
Explanation Fail to set des key.
Trigger Action Fail to set des key.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ des_setkey_fail: Setting
des key fails on VTY 0.
Recommended
Action
No action is required.
Is Supported Yes
32.49 3des_setkey_fail
Mnemonic 3des_setkey_fail Severity Level 4
Syslog Message Setting 3des key fails on VTY [string]
Variable Fields $1: The port of VTY.
Explanation Fail to set 3des key.
Trigger Action Fail to set 3des key.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/3des_setkey_fail: Setting
3des key fails on VTY 0.
Recommended
Action
No action is required.
Is Supported Yes
32.50 rsa_decrypt_fail
Mnemonic rsa_decrypt_fail Severity Level 4
Syslog Message Decrypting using RSA private key fails!
Variable Fields
Explanation Fail to decrypting.
Trigger Action Fail to decrypting.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsa_decrypt_fail:
Decrypting using RSA private key fails!
Recommended
Action
No action is required.
Is Supported Yes
32.51 rsa_gethostkey_fail
Mnemonic rsa_gethostkey_fail Severity Level 4
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page165, Total
176
Syslog Message Getting RSA host key fails!
Variable Fields Fail to get RSA host key.
Explanation Fail to get RSA host key.
Trigger Action Fail to get RSA host key.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsa_gethostkey_fail:
Getting RSA host key fails!
Recommended
Action
No action is required.
Is Supported Yes
32.52 rsa_getserverkey_fail
Mnemonic rsa_getserverkey_fail Severity Level 4
Syslog Message Getting RSA server key fails!
Variable Fields
Explanation Fail to get RSA server key.
Trigger Action Fail to get RSA server key.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsa_getserverkey_fail:
Getting RSA server key fails!
Recommended
Action
No action is required.
Is Supported Yes
32.53 rsa_encrytp_fail
Mnemonic rsa_encrytp_fail Severity Level 4
Syslog Message Encrypting using RSA public key fails!
Variable Fields
Explanation Fail to encrypt.
Trigger Action Fail to encrypt.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rsa_encrytp_fail:
Encrypting using RSA public key fails!
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page166, Total
176
32.54 socket_send_fail.
Mnemonic socket_send_fail Severity Level 4
Syslog Message Sending version string fails!
Variable Fields
Explanation Fail to send version string.
Trigger Action Fail to send version string.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ socket_send_fail:
Sending version string fails!
Recommended
Action
No action is required.
Is Supported Yes
32.55 no_auth_type
Mnemonic no_auth_type Severity Level 4
Syslog Message No configing authentication type for the user!
Variable Fields
Explanation The user has no authentication type.
Trigger Action Configure no authentication type for the user
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ no_auth_type: No
configing authentication type for the user!
Recommended
Action
No action is required.
Is Supported Yes
32.56 get_version_fail
Mnemonic get_version_fail Severity Level 4
Syslog Message Get version string fail!
Variable Fields
Explanation Fail to get version string.
Trigger Action Fail to get version string.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ get_version_fail: Get
version string fail!
Recommended
Action
No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page167, Total
176
Is Supported Yes
32.57 rcv_unexpected_msg
Mnemonic rcv_unexpected_msg Severity Level 4
Syslog Message Received an unexpected message instead of
SSH_CMSG_AUTH_PASSWORD!
Variable Fields
Explanation The message is incorrect.
Trigger Action The message is not SSH_CMSG_AUTH_PASSWORD!
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ rcv_unexpected_msg:
Received an unexpected message instead of
SSH_CMSG_AUTH_PASSWORD!
Recommended
Action
No action is required.
Is Supported Yes
32.58 msg_type_illegal
Mnemonic msg_type_illegal Severity Level 4
Syslog Message The message type is illegal on VTY [string]!
Variable Fields $1: The port of VTY.
Explanation The message type is illegal.
Trigger Action The message type is illegal.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_type_illegal: The
message type is illegal on VTY 0 !
Recommended
Action
No action is required.
Is Supported Yes
32.59 msg_tran_close
Mnemonic msg_tran_close Severity Level 4
Syslog Message Message transport stops !
Variable Fields
Explanation Message transport stops
Trigger Action Message transport stops
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page168, Total
176
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_tran_close:
Message transport stops !
Recommended
Action
No action is required.
Is Supported Yes
32.60 msg_tran_deadloop
Mnemonic msg_tran_deadloop Severity Level 4
Syslog Message Message transport is in deadloop !
Variable Fields
Explanation Fail to transport message.
Trigger Action Fail to transport message.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_tran_deadloop:
Message transport is in deadloop !
Recommended
Action
No action is required.
Is Supported Yes
32.61 msg_client_exit
Mnemonic msg_client_exit Severity Level 4
Syslog Message The connection is closed by SSH Client\r\nCurrent FSM is : [string]
Variable Fields $1: The name of fsm.
Explanation The connection is closed by SSH Client.
Trigger Action The connection is closed by SSH Client.
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_client_exit: The
connection is closed by SSH Client\r\nCurrent FSM is :
SSH_Main_VersionMatch.
Recommended
Action
No action is required.
Is Supported Yes
32.62 msg_ssh_vty
Mnemonic msg_ssh_vty Severity Level 4
Syslog Message The Connection from [string] is refused by ACL.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page169, Total
176
Variable Fields $1: The user’s ipaddr.
Explanation Fail to connect
Trigger Action The user’s ipaddr is unsupported by ACL..
Example %Jan 1 01:27:05 2003 Quidway SSH/5/ msg_ssh_vty:
The Connection from 192.168.1.1 is refused by ACL.
Recommended
Action
No action is required.
Is Supported Yes
33 VFS Messages
This section contains the entire system log messages related to VFS.
33.1 VFSLOG
Mnemonic VFSLOG Severity Level 5
Syslog Message "\r\n [string] \r\n"
Variable Fields $1: Information string.
Explanation Fail to copy or write data into flash.
Trigger Action Copy or write data into flash.
Example %Jan 30 13:42:54:970 2006 S5200 VFS/5/LOG:
Error when copying data into flash, please check flash memory!
Recommended
Action
No action is required.
Trigger Action CF card is removed or inserted.
Example %Jan 30 13:42:54:970 2006 AR19-61 VFS/5/LOG:
cf: removed from slot 0
Recommended
Action
No action is required.
Is Supported Yes
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page170, Total
176
34 VLAN Messages
This section contains the entire system log messages related to VLAN.
34.1 DETECT_FORBIDDEN
Mnemonic DETECT_FORBIDDEN Severity Level 5
Syslog Message forbidden by [STRING] event.
Variable Fields $1: The name of the event.
Explanation
Trigger Action
Example
Recommended
Action
No action is required.
Is Supported No
34.2 DETECT_FORBIDDEN
Mnemonic DETECT_FORBI Severity Level 5
Syslog Message event [STRING] was received
Variable Fields $1: The name of the event
Explanation
Trigger Action
Example
Recommended
Action
No action is required.
Is Supported No
34.3 BATCH notify
Mnemonic BATCH notify Severity Level 5
Syslog Message BATCH notify:[STRING]
Variable Fields $1: The name of the event
Explanation to notify other modules that batch operation will happen
Trigger Action Batch operation happens
Example
Recommended No action is required.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page171, Total
176
Action
Is Supported No
35 VRRP Messages
This section contains the entire system log messages related to VRRP
35.1 LogAuthFailed
Mnemonic LogAuthFailed Severity Level 3
Syslog Message [STRING] | Virtual Router [ULONG] : [STRING]
Variable Fields $1: The interface name which the vritual router was configed to.
$2:The virtual router’s ID
Explanation Received a VRRP packet, but it can not pass the authentication
examination.
Trigger Action Received VRRP packet which can not pass authentication
examination.
Example %Feb 21 17:35:57:99 2006 S8500 VRRP/4/LogAuthFailed:
Ethernet0/0 | Virtual Router 10: failed to authenticate.
Recommended
Action
Check the configuration of the virtual router on the indicated
interface. Make sure that every virtual router of the indicated ID
uses the same authentication mode and authentication key.
Is Supported Yes
35.2 ConfigError
Mnemonic ConfigError Severity Level 3
Syslog Message System detected a vrrp packet error of [STRING]
Variable Fields $1: The error type of the received VRRP packet.
Explanation Received a VRRP packet, but it is not a valid VRRP packet.
Trigger Action Received an invalid VRRP packet. For example, when the system
received a VRRP packet but the checksum is incorrect.
Example %Feb 21 18:00:23:922 2006 S8500 VRRP/4/ConfigError:
System detected a vrrp packet error of CKSUM ERROR
Recommended
Action
Check the configuration of the virtual router on the indicated
interface.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page172, Total
176
Trigger Action The checksum of the VRRP packet is incorrect.
The TTL value of the VRRP packet is incorrect.
The version of the VRRP protocol is not the same as the system.
The type value of the VRRP packet’s TYPE field is incorrect.
The length of the VRRP packet is illegal.
Example See above
Recommended
Action
See above
Is Supported Yes
35.3 ConfigError
Mnemonic ConfigError Severity Level 3
Syslog Message System detected a vrrp config error of [STRING],
Interface:[STRING], Virtual Router:[ULONG]
Variable Fields $1: The error type of configuration.
$2: The interface name.
$3: The Virtual Router’s ID.
Explanation The current configuration of the virtual router is not correct.
Trigger Action The configuration of the virtual router is not correct. For example,
the virtual ip address count of the virtual router is not the same.
Example %Feb 21 18:12:11:860 2006 s8500 VRRP/4/ConfigError:
System detected a vrrp config error of VIRTUAL IP ADDRESS
COUNT ERROR, Interface:Ethernet0/1/0, Virtual Router:10
Recommended
Action
Check the configuration of the virtual router on the indicated
interface. Make sure that every virtual router of the indicated ID
uses the same virtual ip address’s list.
Trigger Action Fail to add virtual Mac address.
The virtual router’s virtual IP address count is not the same.
The virtual router’s IP address in the received VRRP packet is not
the same as the system itself.
The virtual router’s advertisement interval in the received VRRP
packet is not the same as the system itself.
There are more than one IP Owners in The virtual router group.
Virtual IP address is not in the same subnet as the interface IP
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page173, Total
176
address.
Example See above.
Recommended
Action
See above.
Is Supported Yes
35.4 MasterChange
Mnemonic MasterChange Severity Level 3
Syslog Message [STRING] | Virtual Router [ULONG] : [STRING] reason:
[STRING]
Variable Fields $1: The interface name which the virtual router was configured to.
$2: The Virtual Router’s ID.
$3: The reason for the status change.
Explanation The status of the rirtual router changed.
Trigger Action Timer fired.
Example %Feb 21 19:24:19:932 2006 AR19-61 VRRP/5/MasterChange:
Ethernet0/0 | Virtual Router 10 : BACKUP --> MASTER
reason: Timer fired
Recommended
Action
Check the status of the Virtual Router, make sure it works well.
Trigger Action Received VRRP packet.
Fail to add virtual MAC address.
Received an interface event.
The IP address of the interface has been deleted.
Example See above.
Recommended
Action
See above.
Is Supported Yes
35.5 RunError
Mnemonic RunError Severity Level 3
Syslog Message [STRING]
Variable Fields $1: The error information during the system running.
Explanation An error ocures during the system running.
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page174, Total
176
Trigger Action An error ocures during the system running.
Example %Feb 21 19:40:01:31 2006 Quidway-wvrp VRRP/4/RunError:
create Vrrp queue fail
Recommended
Action
Find out why the error ocured and fix it.
Is Supported Yes
35.6 SetDriver
Mnemonic SetDriver Severity Level 3
Syslog Message Interface:[STRING],Virtual Router:[ULONG] [STRING] Virtual MAC
Failed.
Variable Fields $1: The interface name where the virtual router was configured.
$2: The virtual router’s ID
$3: Add or delete virtual MAC.
Explanation Fail to add or delete virtual MAC.
Trigger Action Fail to add or delete virtual MAC.
Example %Feb 21 19:40:01:31 2006 Quidway-wvrp VRRP/4/ConfigError:
System detected a vrrp config error of ADD Virtual MacAddress
Fail, Interface:
Ethernet0/1/0, Virtual Router:12
Recommended
Action
Find out why fail to add or delete Virtual MAC to the driver and fix it.
Is Supported Yes
35.7 TrapBecomeNewMaster
Mnemonic TrapBecomeNewMaster Severity Level 3
Syslog Message [oid]become new master
Variable Fields $1: The OID of the MIB tree’s node.
Explanation A new vritual router turns to MASTER status.
Trigger Action Old MASTER fails to remain MASTER status.
Example #Feb 21 20:14:07:906 2006 Quidway-wvrp
VRRP/4/TrapBecomeNewMaster: 1.3.6.1.2.1.6
Comware V3 Switch System Log Message Secret
2006-02-15 Copyright by Huawei 3Com, disclosure is forbidden Page175, Total
176
8.0.1become new master.
Recommended
Action
No action is required.
Is Supported Yes
35.8 TrapAuthFailed
Mnemonic TrapAuthFailed Severity Level 3
Syslog Message [oid]failed to authenticate
Variable Fields $1: The OID of the MIB tree’s node.
Explanation A VRRP packet fails to pass the authentication examination.
Trigger Action Received a VRRP packet with wrong authentication information.
Example #Feb 21 20:16:46:688 2006 Quidway-wvrp
VRRP/4/TrapAuthFailed: 1.3.6.1.2.1.68.0.2
failed to authenticate
Recommended
Action
Check the configuration of the virtual router on the indicated
interface. Make sure that every virtual router of the indicated ID
uses the same authentication mode and authentication key.
Is Supported Yes
36 VTY Messages
This section contains the entire system log messages related to Telnet Server.
36.1 VTY_LOG
Mnemonic VTY_LOG Severity Level 4
Syslog Message [string]
Variable Fields $1: the output info
Explanation This is a common print info and output the parameter info.
Trigger Action Fail to regenerate randpool or VTY users authentication is timeout
Example %Feb 21 15:39:10:406 2006 Quidway-wvrp VTY/5/VTY_LOG:
RandPool regenerate failed!!.
Recommended No action is required.