comsol conference programcdn.comsol.com/conference/2018/documents/pdf/... · 3 schedule time 8:00am...
TRANSCRIPT
1
COMSOLCONFERENCE2018 BOSTON
Connect. Learn. Innovate.
Final Program
2
Welcome to the COMSOL Conference 2018
SCHEDULEConference schedule at a glance
KEYNOTE SPEAKERSExperience from industry leaders
MINICOURSES AND TECHNICAL WORKSHOPSChoose from over 40 minicourses and sponsored technical workshops
PANEL DISCUSSIONSStart conversation in an interactive and educational setting
USER PRESENTATIONSLearn from your colleagues in application specfi c sessions
POSTER SESSIONMeet the presenters and learn more about their research
3
5 6
10
11
15
Over the course of three days, expand your skills in numerical simulation. Through a better understanding of multiphysics modeling and simulation applications, you will be better equipped and inspired to tackle your next design challenge.
GOLD SPONSORS MEDIA SPONSORS
SILVER SPONSORS
3
SCHEDULE
TIME
8:00Am
9:00Am
9:30Am
10:30Am
11:00Am
12:00pm
1:00pm
1:00pm
2:00pm
2:30pm
3:30pm
4:00pm
5:00pm
6:15pm
Registration Opens
Welcome to theCOMSOL Conference
Minicourses and Workshop
Coffee Break
Keynote Session
Lunch
Demo Stations,Exhibition, and PosterSession Open
Minicourses and Panel Discussion
Coffee Break
Minicourses, Workshop, and Panel Discussion
Coffee Break
Minicourses
Cocktail Reception Sponsored By Tech Briefs
Explore Boston
Ballroom Foyer
Salon E–H
Ballroom Foyer
Salon E–H
Riverside Lawn
Salon A–D
Salon A–D
Salon A–D
COMSOL Multiphysics® for New Users................................
Conduction and Convection.......................................................
Geometry Modeling and CAD Import....................................
Laminar and Microfl uidic Flow.................................................
Resistive and Capacitive Devices.............................................
Sponsored Workshop: Modeling Mechanical Behavior of Rubbers and Thermoplastics in COMSOL Multiphysics® By Veryst Engineering............
Commonwealth 4
Commonwealth 2
Charles River West
Charles River East
Commonwealth 3
Salon E
Commonwealth 2
Commonwealth 4
Charles River East
Commonwealth 3
Commonwealth 1
Salon E
Charles River West
Commonwealth 3
Commonwealth 2
Charles River East
Commonwealth 4
Magnets, Coils, and Motors........................................................
Meshing.............................................................................................
Radiation and Ambient Conditions Modeling.....................
Turbulent and High Mach Number Flow..............................
Understanding the Stationary Solvers...................................
Panel Discussion: Materials Processing and Additive Manufacturing...............................................................................
Moisture Transport and Heat Transfer with Phase Change......................................................................
Optimization....................................................................................
Postprocessing................................................................................
Structural Dynamics Modeling.................................................
Wave Optics Modeling.................................................................
Introduction to the Application Builder................................
RF and Microwave Modeling.....................................................
Structural Mechanics and Multiphysics................................
Understanding the Time-Dependent Solvers.....................
Sponsored Workshop: Synopsys Simpleware™: From 3D Images to Models By Synopsys..........................
Panel Discussion: Batteries and Fuel Cells............................
Svante Littmarck, COMSOL, Inc.
WEDNESDAY OCTOBER 3
EVENT ROOM
Commonwealth 3
Charles River West
Commonwealth 2
Charles River East
Commonwealth 4
Commonwealth 1
Freddy Hansen, Abbott Laboratories
Justin McKennon, NTS Lightning Technologies
Ivana Milanovic, University of Hartford
Deployment Tools Including COMSOL Server™...............
Update Training: Thermal...........................................................
Update Training: Solvers.............................................................
Update Training: Structural and Acoustics.........................Sponsored Workshop: Best Practices for Using COMSOL Multiphysics®: Interpreting Software Feedback By AltaSim................................................................
THURSDAY OCTOBER 4
ROOMTIME
8:00Am
9:00Am
10:00Am
10:30Am
12:00pm
1:00pm
2:30pm
3:00pm
4:30pm
5:00pm
6:00pm
7:00pm
Registration and Breakfast
Minicourses and Panel Discussion
Coffee BreakSponsored by Veryst
User Presentations
Lunch
User Presentations
Coffee Break
Keynote Session
Coffee Break
Minicourses and Workshop
Poster Session
Gala Dinner
Salon A–D
Salon A–D
Riverside Lawn
Salon A–D
Salon E–H
Salon A–D
Salon A–D
Salon E–H
EVENT
Automating Model Building Using Methods and the Application Builder.............................................................
Update Training: CAD and Meshing.......................................
Update Training: Fluid and Chemical.....................................
Update Training: Electrical.........................................................
Panel Discussion: Modeling Strategies for Acoustics Simulations....................................................................................
Charles River East
Charles River West
Commonwealth 2
Commonwealth 3
Salon E
Charles River East
Charles River West
Commonwealth 1
Commonwealth 2
Commonwealth 3
Commonwealth 4
Salon F
Commonwealth 1
Charles River West
Charles River East
Commonwealth 2
Commonwealth 4
Commonwealth 3
Charles River East
Commonwealth 2
Charles River West
Commonwealth 3
Commonwealth 1
AC/DC...............................................................................................
Biomedical Applications............................................................
Chemical Engineering..................................................................
Computational Fluid Dynamics...............................................
Multiphysics 1................................................................................
Structural Mechanics...................................................................
Teaching and Simulation Methods..........................................
Batteries and Electrochemistry...............................................
Biomedical Applications 2 and Microfl uidics.....................
Heat Transfer...................................................................................
MEMS, Piezoelectronics, and Acoustics..............................
Multiphysics 2................................................................................
Optics, Semiconductors, and Plasma.....................................
4
SCHEDULE AND ADDITIONAL INFORMATION
FRIDAY OCTOBER 5
TIME
7:30Am
8:00Am
9:00Am
9:30Am
10:30Am
11:00Am
12:30pm
1:30pm
2:30pm
Registration and Breakfast
Minicourses
Coffee Break
Minicourses and Workshop
Coffee Break
Keynote Session and Awards Ceremony
Lunch
Minicourses
Conference Ends
EVENT
Charged Particle Tracing.............................................................
Chemical Reaction Engineering................................................
Equation-Based Modeling..........................................................
Modeling Speakers, Microphones, and Other Transducers..............................................................
Semiconductor Modeling............................................................
Eric Gebhard, Signal Microwave
Nicholas Goldring, Radiasoft
Electrodeposition and Corrosion.............................................
Modeling Acoustic Propagation in Small and Large Fluid Domains................................................................................
Particle Tracing in Fluids..............................................................
Plasma Modeling.............................................................................
Solving Larger Models..................................................................
Sponsored Workshop: Accelerate Your COMSOL Multiphysics® Simulation Through HPC in the Cloud By: Rescale............................................................
Battery Modeling............................................................................
Introduction to the Application Builder................................
Material Models in Structural Mechanics............................
Porous Media Flow.......................................................................
Ray Optics Modeling.....................................................................
Selecting Hardware.......................................................................
CB 1
CB 2
CB 3
CB 4
HH
GGFF
EEDD
CCBB
HOTELLOBBYHOTELLOBBY
AA
CRECRW
CB
Charles River EastCharles River WestCommonwealth Ballroom
FLOOR PLAN
COMMUNITY EVENTS
EXPLORE BOSTONWednesday, 6:15pm - 10:30pm
Boston
Enjoy a 1-hour walking tour of the Freedom Trail, in Boston, MA. Extra time following the tour will be allotted for independent exploration.
TECH BRIEFS COCKTAIL RECEPTIONWednesday, 5:00pm - 6:00pm
Salon A-D
Meet fellow COMSOL® software users.
EXHIBITIONWednesday, 1:00pm - Friday 1:00pm
Salon A-D
Learn about exhibitors’ products and services.
Exhibitors:
• AltaSim• Veryst Engineering• Synopsys• Rescale• Numerical Design Inc• SIMTEC• Microway• TotalCAE• Mercury Learning• Noumenon• Tech Briefs• IEEE Spectrum• Physics Today• Laser Focus World
LUNCHWednesday, 12:00pm - 1:00pm
Thursday, 12:00pm - 1:00pm
Friday, 12:30pm - 1:30pm
Riverside Lawn
Have lunch by the Charles River surrounded by New England’s beautiful fall foliage.
POSTER SESSIONThursday, 6:00pm - 7:00pm
Salon A-D
View the posters and meet the authors.
GALA DINNERThursday, 7:00pm - 8:30pm
Salon E-H
Try different foods at this relaxed, buffet-style dinner.
AWARDS CEREMONYFriday, 11:00Am - 12:30pm
Salon E-H
Celebrate the winners of the Best Poster and Best Paper awards.
Salon A–D
Salon A–D
Salon A–D
Salon E–H
Riverside Lawn
ROOM
Commonwealth 4
Charles River West
Commonwealth 3
Commonwealth 2
Charles River East
Charles River West
Commonwealth 2
Commonwealth 4
Charles River East
Commonwealth 3
Commonwealth 1
Charles River West
Commonwealth 1
Commonwealth 2
Charles River East
Commonwealth 4
Commonwealth 3
5
KEYNOTE SPEAKERS
SVANTE LITTMARCK COMSOL, Inc.
Wednesday, October 3
Svante Littmarck is the president and CEO of COMSOL, Inc. He cofounded the COMSOL Group in 1986. In 2004, Littmarck received an honorary doctoral degree from the Royal Institute of Technology (KTH) in Stockholm, Sweden, for the development and international reach of high-quality software for scientifi c computations through his company COMSOL.
FREDDY HANSEN Abbott Laboratories
Building a Better Pump for Heart Failure PatientsThursday, October 4
Abbott’s Mechanical Circulatory Support group build implants that help people suffering from heart failure, a deadly and increasingly common disease. We combine computational fl uid dynamics and particle tracing simulations to optimize the designs of implantable blood pumps that replace the left heart function. In an example, we will showcase HeartMate 3™, a blood pump with a magnetically levitated rotor and arguably the most complex machine ever implanted into a human being.
ERIC GEBHARD Signal Microwave
COMSOL® Used as Core Technology for Development of RF/Microwave and High-Speed Digital ConnectorsFriday, October 5
Signal Microwave designs and builds coaxial connectors for microwave and high-speed digital applications. This includes wireless systems, radar, 5G, optical systems, test equipment, back planes, etc. The COMSOL® software is one of our core technologies and is used to design virtually every product we make. This presentation will show how COMSOL Multiphysics® is integrated into our design process and allows us to develop excellent products with a faster design cycle time. A pair of examples will be given, showing how COMSOL Multiphysics® allowed us to minimize the development time, troubleshoot machined material, and meet our customers’ requirements.
NICHOLAS GOLDRING Radiasoft
Use of the COMSOL Server™ License to Simulate Next-Generation Synchrotron Light SourcesFriday, October 5
Next-generation synchrotron light sources are creating orders-of-magnitude brighter X-rays by reducing horizontal emittance. This requires the bending magnet pole tips to be closer to the electron beam axis, which in turn requires smaller vacuum chambers. The resultant design challenges are dictated by complex and coupled physical phenomena, including high thermal stresses, photon-stimulated desorption, and electromagnetic wakefi elds. The Application Builder in the COMSOL Multiphysics® software enables the creation of browser-based graphical user interfaces (GUIs), which enable scientists and engineers to study this complicated problem domain without becoming an expert user of the COMSOL® software. With a relatively inexpensive COMSOL Server™ product license, these GUIs can be run on a cloud-based server, with many processors and all of the required RAM for complex simulations. This approach extends the power of COMSOL Multiphysics® to collaborators, customers, students, etc. We present two such GUIs: 1) the emission of synchrotron radiation and resultant thermal stress on vacuum chamber walls that are downstream of dipole bending sections, and 2) accurate thermal analysis and optimized mechanical bending correction for high-heat-load beamline mirrors. The various challenges of creating the underlying FEA models and the methods used to overcome them will be discussed. Both examples are relevant to the Advanced Photon Source upgrade (APS-U) under construction at Argonne National Laboratory.
JUSTIN MCKENNON NTS Lightning Technologies
The Role of Multiphysics Modeling in Lightning Protection Design and Certifi cationThursday, October 4
In the aerospace and wind turbine fi elds, implementing a suitable lightning protection design is paramount. Lightning, and other electromagnetic effects (precipitation static, radiated fi elds, etc.), can seriously degrade performance, damage, or even destroy objects without an acceptable protection design. In the past, to determine the threat that lightning poses, several iterations of engineering testing were required to obtain data, which drives the protection features an object must have to survive. This is a high-risk path and can result in tremendous program costs and setbacks. Multiphysics modeling allows for the effects of lightning to be understood without having to perform dozens of test iterations and frequently results in large time and cost savings for programs that use it. In this talk, the role of multiphysics in the development of lightning protection designs and the certifi cation of these designs is discussed as well as the benefi ts of this approach.
IVANA MILANOVIC University of Hartford
Simulation-Based Approach to STEM ChallengesThursday, October 4
A new pedagogical approach to STEM challenges is currently implemented in the mechanical engineering program at the University of Hartford. This approach combines problem- and inquiry-based learning, simulations and apps with the COMSOL Multiphysics® software, and emphasizes the importance of outside-of-class learning supported by effective reference materials and faculty mentoring.
A two-course sequence was modifi ed to contain scaffolded and contextualized simulations with application building that develop technical competency in modeling, a deeper understanding of thermofl uids concepts by solving realistic technological problems, and writing skills by generating technical reports for each simulation. Apps involve creating a simplifi ed interface that contains the full effi cacy of the underlying model but not exposing the end user to its complexity.
5
Advanced Photon Source upgrade (APS-U) under construction at Argonne National Laboratory.
A new pedagogical approach to STEM challenges is currently implemented in the mechanical engineering program at the University of Hartford. This
software, and emphasizes the importance of outside-of-class learning supported by effective reference
contextualized simulations with application building that develop technical competency in modeling, a deeper understanding of thermofl uids concepts by solving realistic technological problems, and writing skills by generating technical reports for each simulation. Apps involve creating a simplifi ed
6
MINICOURSES AND TECHNICAL WORKSHOPS
CORE USAGE & THEORYCOMSOL MULTIPHYSICS® FOR NEW USERS
Wednesday, October 3, 9:30AM Commonwealth 3This minicourse is for those who are just starting out with COMSOL Multiphysics® or want a refresher on the graphical user interface (GUI) and modeling workfl ow. During this session, the fundamentals of using the COMSOL® software will be demonstrated.
GEOMETRY MODELING AND CAD IMPORT
Wednesday, October 3, 9:30AM
Commonwealth 2Whether you choose to construct a geometry in the COMSOL Desktop® or import it from a CAD fi le, this minicourse will demonstrate some useful tools. Did you know that COMSOL Multiphysics® can automatically generate the cross section of a solid object and you can use it for a 2D simulation? Or that you can directly import topographic data to create 3D objects? Generating a geometry is also about preparing selections for physics settings. By using the right selection tools, you can easily automate the modeling workfl ow, even when this involves simulations on widely different versions of a geometry. Attend this minicourse to see a demonstration of these techniques and more.
MESHING
Wednesday, October 3, 1:00PM
Commonwealth 2In this minicourse, we will walk you through the meshing techniques that are available to you in the COMSOL Multiphysics® software. We will introduce you to basic meshing concepts, such as how to tweak the meshing parameters for unstructured meshes. More advanced topics include working with swept meshes and creating mesh plots. You will also learn a useful technique for meshing imported CAD designs: How to hide small geometry features from the mesher.
UNDERSTANDING THE STATIONARY SOLVERS
Wednesday, October 3, 1:00PM
Commonwealth 3COMSOL Multiphysics® gives you precise control over the way in which your multiphysics models are solved. In this minicourse, we will cover the fundamental numerical techniques and underlying algorithms used for steady-state models and explain the reasons behind the default solver settings. Building upon this knowledge, you will learn various techniques for achieving or accelerating convergence of nonlinear multiphysics models.
INTRODUCTION TO THE APPLICATION BUILDER
Wednesday, October 3, 2:30PM
Commonwealth 2Friday, October 5, 1:30PM
Commonwealth 1The Application Builder, included in the COMSOL Multiphysics® software, allows you to wrap your COMSOL Multiphysics® models in user-friendly interfaces. This minicourse will cover the two main components of the Application Builder: the Form Editor and the Method Editor. You will learn how to use the Form Editor to add buttons, sliders, input and output objects, and more. You will also learn how to use the Method Editor and other tools to effi ciently write methods to extend the functionality of your apps.
UNDERSTANDING THE TIME-DEPENDENT SOLVERS
Wednesday, October 3, 2:30PM
Commonwealth 3COMSOL Multiphysics® includes a set of powerful implicit time-stepping algorithms for fast and accurate solutions to transient models. In this minicourse, you will learn how to pick a solver based on the problem at hand, measure and control computational error, as well as check convergence and other salient issues in time-dependent analyses using the fi nite element method.
OPTIMIZATION
Wednesday, October 3, 4:00PM
Commonwealth 3The Optimization Module will take you beyond traditional engineering analysis and into the design process. In this minicourse, you will learn to use gradient-based optimization techniques and constraint equations to defi ne and solve problems in shape, parameter, and topology optimization, as well as inverse modeling. The techniques shown in this minicourse are applicable for almost all types of models.
POSTPROCESSING
Wednesday, October 3, 4:00PM
Commonwealth 2When presenting your results, the quality of the postprocessing will determine the impact of your presentation. This minicourse will thoroughly explore the many tools in the Results node designed to make your data look its best, including mirroring, revolving symmetric data, cut planes, cut lines, exporting data, joining or comparing multiple data sets, as well as animations.
AUTOMATING MODEL BUILDING USING METHODS AND THE APPLICATION BUILDER
Thursday, October 4, 9:00AM
Charles River EastLearn how to use the Application Builder and the Method Editor to automate your model building, including setting up the geometry, material properties, loads, and boundary conditions; meshing; solving; and extracting data. You will learn how the Application Builder can be a powerful tool in your modeling process.
DEPLOYMENT TOOLS INCLUDINGCOMSOL SERVER™
Thursday, October 4, 5:00PM
Charles River EastLearn how to use COMSOL Server™ to deploy apps created with COMSOL Multiphysics® and spread the use of simulation. This minicourse will introduce you to working with the administration web page, managing user accounts and privileges, uploading and managing apps, monitoring usage, and confi guring system-level settings.
EQUATION-BASED MODELING
Friday, October 5, 8:00AM
Commonwealth 3Partial differential equations (PDEs) constitute the mathematical foundation to describe the laws of nature. This minicourse will introduce you to the techniques for constructing your own linear or nonlinear PDE systems. You will also learn how to add ordinary differential equations (ODEs) and algebraic equations to your model.
SOLVING LARGER MODELS
Friday, October 5, 9:30AM
Commonwealth 3Solving large and complex fi nite element models can take signifi cant time and computational resources. In this minicourse, we will address the modeling techniques that you should be aware of and then go into the choice of solvers for large models. We will cover the differences between the various solvers in the COMSOL Multiphysics® software in terms of their time and memory usage.
SELECTING HARDWARE
Friday, October 5, 1:30PM
Commonwealth 3This course builds upon the Solving Larger Models minicourse and addresses how to select hardware for computationally challenging multiphysics models. Solver performance is inextricably linked to computer architecture and this course will cover how factors such as memory bandwidth, processor speed, and architecture address solution times.
7
MINICOURSES AND TECHNICAL WORKSHOPS
ELECTRICALRESISTIVE AND CAPACITIVE DEVICES
Wednesday, October 3, 9:30AM Commonwealth 4In this minicourse, we will address the modeling of resistive and capacitive devices with the AC/DC Module. We will also cover the calculation of electric fi elds under steady-state, transient, and frequency-domain conditions, as well as the extraction of lumped parameters such as capacitance matrices. Applications include the modeling of resistive heating and sensor design.
MAGNETS, COILS, AND MOTORS
Wednesday, October 3, 1:00PM
Commonwealth 4Magnetic fi elds arise due to magnets and the fl ow of current. In this minicourse, you will learn about using the AC/DC Module to model static, transient, and frequency-domain magnetic fi elds that arise around magnets and coils. We will introduce various ways of modeling magnetically permeable materials, motors, and generators.
RF AND MICROWAVE MODELING
Wednesday, October 3, 2:30PM
Commonwealth 4In this minicourse, we will cover the use of the RF Module for simulating Maxwell’s equations in the high-frequency electromagnetic wave regime. We will discuss applications in resonant cavity analysis, antenna modeling, transmission lines and waveguides, and scattering. Then, we will address the coupling of electromagnetic wave simulations to heat transfer, such as in RF heating.
WAVE OPTICS MODELING
Wednesday, October 3, 4:00PM
Commonwealth 4The Wave Optics Module offers both full-wave modeling of Maxwell’s equations and the beam envelope method. The beam envelope method is particularly useful for modeling optical waveguiding structures, where the fi eld envelope varies slowly along the direction of propagation. This minicourse introduces the use of the beam envelope method and how it contrasts with full-wave models. Optical scattering from periodic structures, such as gratings, will also be covered.
CHARGED PARTICLE TRACING
Friday, October 5, 8:00AM
Commonwealth 4Learn how to use the Particle Tracing Module to compute the paths of ions and electrons in external electric and magnetic fi elds. The external fi elds can be entered as expressions or solved for using a different physics interface, then coupled to the
minicourse, you will get an overview of how to model fl uid-structure interaction, thermal stresses and thermoelastic damping, electromechanical forces, magnetostriction, piezoelectricity, poroelasticity, and acoustic-structure interaction. The built-in multiphysics couplings are highlighted, together with examples of how to create your own couplings.
STRUCTURAL DYNAMICS MODELING
Wednesday, October 3, 4:00PM
Charles River EastIn this minicourse, you will learn how to model problems within the fi eld of structural dynamics. The course covers eigenfrequency analysis, frequency-domain analysis, time-domain analysis, and modal superposition. You will learn how to select appropriate and effi cient methods. Damping models, nonlinearities, linearization, and prestressed analysis are other important topics. You will also get a brief overview of the Multibody Dynamics Module and Rotordynamics Module.
MODELING SPEAKERS, MICROPHONES, AND OTHER TRANSDUCERS
Friday, October 5, 8:00AM
Commonwealth 2This minicourse is focused on modeling all kinds of transducers. The transduction from an electric signal to an acoustic signal, including the mechanical path, is a true multiphysics application. We will set up a simple model using the built-in multiphysics couplings and also look at other modeling techniques, like combining lumped models with FEM or BEM. The analysis can be done in the frequency domain or extended to the time domain, where nonlinear effects can be included. You will also learn about recent news and additions to the COMSOL Multiphysics® software relevant to the topic. Application areas include, but are not limited to, mobile devices, piezotransducers, loudspeakers, headsets, and speaker cabinets.
MODELING ACOUSTIC PROPAGATION IN SMALL AND LARGE FLUID DOMAINS
Friday, October 5, 9:30AM
Commonwealth 2In this minicourse, we will study different classes of problems involving acoustic propagation in fl uids. This ranges from propagation in large domains, such as rooms or the ocean, to transmission through small perforations where thermal and viscous losses are important. Detailed modeling of the propagation in moving fl uids is also discussed. This is, for example, the case in a muffl er with a nonisothermal background fl ow. You will also learn about recent news and additions to the COMSOL Multiphysics® software relevant to the topic. Application
Charged Particle Tracing interface. Typical applications include mass spectrometry, accelerator physics, ion optics, and etching. You will learn how to use a probabilistic approach to simulate the collisions between these ions or electrons and a rarefi ed background gas. We will also discuss the analysis of nonlaminar charged particle beams and self-consistent modeling of bidirectionally coupled particle-fi eld interactions.
SEMICONDUCTOR MODELING
Friday, October 5, 8:00AM
Charles River EastThe Semiconductor Module enables the drift-diffusion modeling of semiconductor devices and modeling quantum systems with the Schrödinger equation. This minicourse focuses on practical topics such as model setup, results visualization, circuit and multiphysics couplings, and best practices, by examining a few tutorial models selected from the Application Libraries.
PLASMA MODELING
Friday, October 5, 9:30AM
Charles River EastThis course will introduce some of the most common types of plasmas, including inductively coupled, DC, microwave, and capacitively coupled plasmas. In addition to learning about the differences between each type of discharge, the minicourse will show how to set up a model of a capacitively coupled plasma using a revolutionary new method available in the Plasma Module.
RAY OPTICS MODELING
Friday, October 5, 1:30PM
Commonwealth 4In this minicourse, you will learn how to use the Ray Optics Module to trace rays of light and other high-frequency radiation through optically large systems. We will explain how to model ray propagation in homogeneous and graded-index media; analyze ray intensity and polarization; and apply boundary conditions including refraction, diffuse refl ection, and specular refl ection. We will discuss application areas including cameras, telescopes, laser focusing systems, spectrometers, and concentrated solar power systems. You will also learn how to apply the Ray Optics Module in a multiphysics context by considering structural and thermal effects.
MECHANICAL & ACOUSTICSSTRUCTURAL MECHANICS AND MULTIPHYSICS
Wednesday, October 3, 2:30PM Charles River EastMany different physical phenomena are coupled to the deformation of solids. In this
ELECTRICAL
8
MINICOURSES AND TECHNICAL WORKSHOPS
areas include, but are not limited to, muffl er design, sound insulation materials, room and car acoustics, and fl ow meters.
MATERIAL MODELS IN STRUCTURAL MECHANICS
Friday, October 5, 1:30PM
Commonwealth 2COMSOL Multiphysics® contains a large number of built-in material models for solid materials. In this minicourse, you will get an overview of common material models for metals, elastomers, soils, concrete, and shape memory alloys. Phenomena like plasticity, creep, viscoplasticity, hyperelasticity, and damage will be discussed. You will also learn how to augment the capacity of the program by creating your own material models, either by equation-based modeling or by programming in C-code. Finally, the relation between measurements and material properties will be discussed.
FLUID & HEAT TRANSFERCONDUCTION AND CONVECTION
Wednesday, October 3, 9:30AM
Charles River WestIn this minicourse, you will learn about modeling conductive and convective heat transfer with COMSOL Multiphysics®, the Heat Transfer Module, the CFD Module, and the Subsurface Flow Module. Conductive heat transfer modeling addresses heat transfer through solids and can include heat transfer in thin layers, contact thermal resistance, and phase change. Convective heat transfer addresses heat transfer in solids and fl uids. We will also address natural convection induced by buoyancy forces.
LAMINAR AND MICROFLUIDIC FLOW
Wednesday, October 3, 9:30AM
Charles River EastIn this minicourse, we will cover the Microfl uidics Module, which features custom interfaces for the simulation of microfl uidic devices and rarefi ed gas fl ows. Single-phase fl ow capabilities include both Newtonian and non-Newtonian fl ow. Beyond its single-phase fl ow capabilities, this module also allows for two-phase fl ow simulations to capture surface tension forces, capillary forces, and Marangoni effects. Typical applications include lab-on-a-chip (LOC) devices, digital microfl uidics, electrokinetic and magnetokinetic devices, inkjets, and vacuum systems.
RADIATION AND AMBIENT CONDITIONS MODELING
Wednesday, October 3, 1:00PM
Charles River WestRadiative heat transfer is one of the three
types of heat transfer and plays a major role in many applications. During this session, we will focus on the features for modeling surface-to-surface radiation for gray surfaces or multiple spectral bands, such as solar and infrared radiation. We will discuss different examples in order to help identify cases where thermal radiation has to be accounted for.
Defi ning ambient conditions is a key point in the model defi nition, especially when solar radiation is accounted for, but there are also other cases. We will review the different means to defi ne the ambient condition and how use them for conduction, convection, and radiation in heat transfer models.
TURBULENT AND HIGH MACH NUMBER FLOW
Wednesday, October 3, 1:00PM
Charles River EastLearn how to effi ciently simulate incompressible and compressible turbulent fl ows in this CFD minicourse. The CFD Module allows for accurate multiphysics fl ow simulations, such as conjugate heat transfer with nonisothermal fl ow and fl uid-structure interactions. We will also discuss physics interfaces for simulating fl ow in porous media, discrete and homogeneous two-phase fl ow, and fl ow in stirred vessels with rotating parts.
MOISTURE TRANSPORT AND HEAT TRANSFER WITH PHASE CHANGE
Wednesday, October 3, 4:00PM
Charles River WestChanges in the temperature of a material can lead to a change in material phase, from solid to liquid to gas. The evaporation and condensation of water are very common cases of phase change. This minicourse will introduce you to moisture transport and the various types of phase change modeling that can be done with COMSOL Multiphysics® and the Heat Transfer Module. We will address the relative merits and tradeoffs between these techniques.
PARTICLE TRACING IN FLUIDS
Friday, October 5, 9:30AM
Commonwealth 4Lagrangian particle tracking is often used as a complement to Eulerian methods that solve for fl uid fl ow fi elds. In this course, we will explain how to use the Particle Tracing Module to predict the motion of solid particles, droplets, and bubbles in a surrounding fl uid. We will outline some of the myriad built-in forces included in the Particle Tracing for Fluid Flow interface, including lift, drag, electromagnetic, thermophoretic, and acoustophoretic forces. You will also learn how to accurately model particle dispersion in a turbulent fl ow.
POROUS MEDIA FLOW
Friday, October 5, 1:30PM
Charles River EastPorous media surrounds us, whether it is the ground beneath us, paper products, fi lters, or even biological tissue. In this minicourse, we will explore fl ow and diffusion in porous media as well as how to treat partially saturated media. We will also cover coupled systems including linked free and porous fl ows; poroelasticity; and mass convection-diffusion in forced, gravity-fed, and density-driven fl ows. saturated media. We will also cover coupled systems including linked free and porous fl ows; poroelasticity; and mass convection-diffusion in forced, gravity-fed, and density-driven fl ows.
CHEMICALCHEMICAL REACTION ENGINEERING
Friday, October 5, 8:00AM
Charles River WestIn this minicourse, you will learn how to defi ne chemical kinetics, thermodynamic properties, and transport properties for models of reacting systems using the Chemical Reaction Engineering Module. We will address topics including homogeneous and surface reactions, diffusion and convection in diluted and concentrated solutions, thermal effects on transport and reactions, and mass and heat transfer in heterogeneous catalysis.
ELECTRODEPOSITION AND CORROSION
Friday, October 5, 9:30AM
Charles River WestIn this minicourse, you will learn how to defi ne and solve problems in electrodeposition, corrosion protection, and corrosion studies. These systems all involve mass and charge transfer coupled to electrochemical reactions at deforming metal surfaces. We will look at two different approaches: one that treats the surface deformation as a variable and a second approach that treats the surface deformation with moving mesh. The most common type of study for these systems is the time-dependent study, but we will also briefl y look at electrochemical impedance spectroscopy (EIS) studies.
BATTERY MODELING
Friday, October 5, 1:30PM
Charles River WestIn this minicourse, you will learn to model batteries with a focus on lithium-ion batteries, including transport of ions, porous electrodes, and electrode reactions. You will also get an introduction to the corresponding couplings to heat transport for performing thermal simulations. We will address how to simulate various transient phenomena such as constant current-
99
MINICOURSES AND TECHNICAL WORKSHOPS
constant voltage (CCCV) charge/discharge cycling, electrochemical impedance spectroscopy (EIS), and capacity fade.
UPDATE TRAININGCAD AND MESHING
Thursday, October 4, 9:00AM
Charles River WestIn this minicourse, we will discuss and demonstrate recent additions to the functionality for creating and importing geometry and generating meshes in COMSOL Multiphysics®. We will cover topics such as the automatic removal of small details from geometry, using variable dependent size expressions for mesh generation, defi ning coordinate systems based on work planes and geometry orientations, setting up selections during the import of printed circuit board geometries, and more.
ELECTRICAL
Thursday, October 4, 9:00AM
Commonwealth 3Join this update training minicourse to learn about major upgrades to the electromagnetics simulation tools. Both low- and high-frequency modeling capabilities will be covered. Products featured include the AC/DC Module, RF Module, Wave Optics Module, and Ray Optics Module.
FLUID AND CHEMICAL
Thursday, October 4, 9:00AM
Commonwealth 2Stay current with new modeling capabilities for fl uid fl ow and chemical simulations through this update training minicourse.
STRUCTURAL AND ACOUSTICS
Thursday, October 4, 5:00PM
Commonwealth 3Attend this update training minicourse for a roundup of major news for acoustics and structural analysis.
SOLVERS
Thursday, October 4, 5:00PM
Charles River WestIn this update training minicourse, learn about news for the studies and solvers available in the COMSOL Multiphysics® software. We will go over upgrades to parametric sweeps, adaptation, model reduction, performance-enhancing functionalities, and more.
THERMAL
Thursday, October 4, 5:00PM
Commonwealth 2Learn about news for thermal modeling in this update training minicourse. Upgrades of the Heat Transfer Module will be discussed
as well as its multiphysics couplings with other modules for electromagnetics, structural, and fl uid fl ow simulation.
SPONSORED WORKSHOPSMODELING MECHANICAL BEHAVIOR OF RUBBERS AND THERMOPLASTICS IN COMSOL MULTIPHYSICS®
By Veryst Engineering
Wednesday, October 3, 9:30AM
Commonwealth 1The nonlinear strain-rate- and temperature-dependent response of polymers can be accurately captured using the COMSOL Multiphysics® software, either through the built-in material models or the PolyUMod library (linked to the COMSOL Multiphysics® software via the External Material Model interface). In this workshop, we will demonstrate how to accurately predict the thermomechanical response of different polymeric materials, including cases where we recommend material models from the PolyUMod library. The examples will include all steps, from experimental testing and material model selection and calibration to COMSOL Multiphysics® software simulations.
SYNOPSYS SIMPLEWARE™: FROM 3D IMAGES TO MODELSBy Synopsys
Wednesday, October 3, 2:30PM
Commonwealth 1This minicourse demonstrates the ease of obtaining high-quality models from 3D image data in the Synopsys Simpleware™ software for use in the COMSOL Multiphysics® software. The workfl ow of processing 3D image data (e.g., from MRI, CT, Micro-CT, and FIB-SEM) to create models for life sciences, materials, and manufacturing applications will be outlined and demonstrated. Learn about the capabilities of the Simpleware™ software for image visualization, segmentation, analysis, and model generation. Examples will also be shown of workfl ows and case studies combining the Simpleware™ software and the COMSOL Multiphysics® software.
Simpleware is a trademark of Synopsys, Inc. in the U.S. and/or other countries.
BEST PRACTICES FOR USING COMSOL MULTIPHYSICS®: INTERPRETING SOFTWARE FEEDBACKBy AltaSim
Thursday, October 4, 5:00PM
Commonwealth 1No matter how well COMSOL developers build COMSOL Multiphysics®, there are times when the software does not respond the way the user desires. Often, these unexpected responses are driven by user input. This class addresses methods to
identify user mistakes during model development based on feedback provided by the software. The course material will provide valuable insights into interpreting errors, warnings, and other feedback from COMSOL Multiphysics®. Utilizing our experience and extensive use of the software as a COMSOL Certifi ed Consultant, this course will examine common error messages and provide solutions to understanding and addressing these issues.
ACCELERATE YOUR COMSOL MULTIPHYSICS® SIMULATION THROUGH HPC IN THE CLOUDBy Rescale
Friday, October 5, 9:30AM
Commonwealth 1Advancement in multiphysics simulations and apps allows engineers to solve more complex engineering problems faster. A high-end workstation is no longer suffi cient to solve simulations in a timely manner.
High-performance computing on the cloud offers a variety of advantages to simulation engineers. Benefi ts include providing instantly scalable computing resources, an integrated environment with COMSOL Multiphysics® and COMSOL Server™, and fully automated deployment tools. Imagine the engineering challenges you could solve with unlimited cloud HPC resources?
In this workshop, we will discuss how engineers and scientists are overcoming the constraints of traditional engineering resources and processes by deploying multiphysics simulations and apps to the cloud. This will be followed by a hands-on training and demo session. You will have the opportunity to test drive your COMSOL Multiphysics® model on the Rescale® ScaleX® cloud HPC platform.
UPDATE TRAINING
10
Batteries and Fuel CellsWednesday, October 3, 2:30PM - 3:15PM
Moderator: Ed Fontes, COMSOLPanelists: Taylor Garrick, General Motors Global Propulsion Systems Karen Thomas-Alyea, Samsung Research AmericaRalph White, University of South CarolinaDavid Woolley, Saint-Gobain Corporation
Legislation for air pollution and carbon dioxide emission targets have accelerated the development of hybrid and electric cars. This development has also put focus on battery and fuel cell research and development, where modeling and simulation are proven methods for obtaining fast results. In this session, we will discuss the latest requirements and the trends regarding the processes — for example, thermal management, performance degradation, short circuiting, and fast recharge — which are important to study through modeling and
PANEL DISCUSSIONS
Modeling Strategies for Acoustics SimulationsThursday, October 4th, 9:00AM -9:45AM
Moderator: Nagi Elabbasi, Veryst EngineeringPanelists: Patrick Dennis, Nissan Nikolai Pastouchenko, GE Global ResearchMarc Reese, Indy Acoustic ResearchBrent Shumard, Shure, Inc.Daniel Warren, GN Hearing
Virtual prototypes and digital twins play a major role in the development process across industries. This is also true when dealing with acoustics, from designing audio systems in cars and optimizing miniature transducer performance in mobile devices to designing muffl er systems. Common to these applications is the need to use different modeling strategies depending on the frequency range, model size, and details included in the physics used. The integration of simulations and testing is also important.included in the physics used. The integration of simulations and testing is also important.
Materials Processing and Additive ManufacturingWednesday, October 3, 1:00PM - 1:45PM
Moderator: Jeff Crompton, Altasim TechnologiesPanelists: Erica Coenen, Reveal Energy Services Nicholas Feng, MIT/BMF Material TechnologyKelvin Leung, Technical Data AnalysisParis von Lockette, Pennsylvania State University
Additive manufacturing (AM) offers an almost unparalleled opportunity to produce complex three-dimensional objects with minimal waste and without signifi cantly increasing production costs. AM technology has matured from its origins in manufacturing prototypes to the successful production of customized, commercial-scale products. During this time, it has demonstrated the potential to transform the rules of component design and manufacture by reducing or eliminating the constraints of traditional molds, presses, and dies. In this discussion, we will examine the current trends in AM and the role of virtual prototyping in extending the impact of this transformative technology.transformative technology.
11
USER PRESENTATIONSThese user presentations happen simultaneously, choose the ones that most interest you!
AC/DCThursday, October 4, 10:30AM
Charles River East
Using Multiphysics to Quantify Leakage Rates in New and Rehabilitated Sewer and Water Pipes
C. Hansen1
1Electro Scan Inc., Sacramento, CA, USA
Automated Meshing of Evolving Microstructures from High-Throughput Grain Growth Simulations
M. Golt1, E. Hernandez-Rivera1
1U.S. Army Research Laboratory, Aberdeen Proving Ground, MD, USA
Development of Eddy Current Probe using FEM for Matte Level Detection in Pyrometallurgical Furnaces
A. Saleem1, P. R. Underhill1, D. Chataway2, T. Gerritsen2, A. Sadri2, T. W. Krause1
1Department of Physics and Space Science, Royal Military College of Canada, Kingston, ON, Canada 2Hatch Ltd., Mississauga, ON, Canada
Analysis of Electromagnetic Fields in Urban Environments
J. Crompton1, L. Gritter1, S. Yushanov1, K. Koppenhoefer1
1AltaSim Technologies, Columbus, OH, USA
Comprehensive Numerical Modeling of Filamentary RRAM Device
D. Niraula1, V. Karpov1
1University of Toledo, Toledo, OH, USA
Electromagnetic Simulation of Split-Core Current Transformer for Medium Voltage Applications
N. Paudel1, V. Siddharth1, S. Shaw1, D. Raschka1
1ABB, Inc., Instrument Transformers & Distribution Components, Pinetops, NC, USA
BIOMEDICAL APPLICATIONSThursday, October 4, 10:30AM
Charles River West
A Heat Transfer Analysis of the Cochlea During Magnetically-guided Cochlear Implant Surgery
F. Esmailie¹, M. Francoeur¹, T. A. Ameel¹
¹Department of Mechanical Engineering, University of Utah, Salt Lake City, UT, USA
Simulator for the Development of Electromagnetic Heart Assist Devices
D. G. Hurd1
1Iowa State University, Ames, IA, USA
A Partial Verification of a COMSOL® Example Problem on the Fluid-Structure Interaction in a Network of Blood Vessels
J. T. Fong1, A. Heckert1, J. J. Filliben1
1National Institute of Standards & Technology, Gaithersburg, MD, USA
Multi-objective Optimization of Microneedle Design for Transdermal Drug Delivery
M. Sarmadi1, K. McHugh1, R. Langer1, A. Jaklenec1
1David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, MA, USA
Computational Modeling of Diffusion-Based Transport from Differing Designs of Drug-Containing Sutures
S. Jorgensen1, J. R. Sanders1, Y. W. Liu1
1Tennessee Technological University, Cookeville, TN, USA
Mathematical Modeling of Drug Transport in Brain Tumors
Y. Guo¹, M. O. Bernabeu², C. D. Arvanitis¹
¹Georgia Institute of Technology, Atlanta, GA, USA ²University of Edinburgh, Edinburgh, United Kingdom
CHEMICAL ENGINEERINGThursday, October 4, 10:30AM
Commonwealth Ballroom 1
Diffusive Transport in a Deep Geological Repository for Used Nuclear Fuel
M. Krol1 , S. Briggs2
1York University, Toronto, ON, Canada 2Nuclear Waste Management Organization, Toronto, ON, Canada
Simulation of Adsorption Mechanisms of Methane and Carbon Dioxide in Shale Matrix
J. G. Moreira1, A. L. Manriquez1
1Texas A&M University - Kingsville, Kingsville, TX, USA
Simulation of an Oxygen Delignification Reactor in the Kraft Pulp Production Process
D. do Mato Lara1, J. da Luz Maeiski1, I. Neitzel1
1Faculdade de Telêmaco Borba, Telêmaco Borba, PR, Brazil
Simulation of an Ethane Steam Cracking Reactor for Ethane-Propane Mixtures
R. Martinez1, J. A. Galán2, Y. Amaya1, H. S. Arenas1
1Universidad Industrial de Santander, Bucaramanga, Santander, Colombia 2Empresa Colombiana de Petróleos, Barrancabermeja, Santander, Colombia
Elucidating the Mechanisms of Charge and Temperature Modulated Ionic Transport in Nanochannels
G. Zhang1, Y. Zhao1
1Department of Biomedical Engineering,
University of Kentucky, Lexington, KY, USA
COMPUTATIONAL FLUID DYNAMICSThursday, October 4, 10:30AM
Commonwealth Ballroom 2
Adaptive Mesh Refinement: Quantitative Computation of a Rising Bubble Using COMSOL Multiphysics®
T. Preney1, P. Namy1, J. Wheeler1
1SIMTEC, Grenoble, France
Computational Fluid Dynamics Modeling of the NASA Titan Wind Tunnel
S. E. H. Sakimoto1, 2, D. M. Burr3, S. L. Sutton3
1Space Science Institute, Boulder, CO, USA 2Department of Geology, University at Buffalo, Buffalo, NY, USA 3Department of Earth and Planetary Sciences, University of Tennessee - Knoxville, Knoxville, TN, USA
Modeling Two Phase Fluid Flow in High Speed Counter Current Chromatography
G. Stevens1, K. Weisbrod1, R. Chamberlin1, S. Yarbro1
1Los Alamos National Laboratory, Los Alamos, NM, USA
Numerical Simulation of Coupled Fluid-Solid Interaction in Digital Rock Samples
V. Das1, T. Mukerji1, G. Mavko1
1Stanford University, Stanford, CA, USA
Structure of a Classical Vortex Ring
J. M. Russell1
1Florida Institute of Technology, Melbourne, FL, USA
When Precise Numerical Predictions Come to the Rescue of Liquid Lubrication
J. D. Wheeler1, V. Bruyere1, P. Namy1
1SIMTEC, Grenoble, France
MULTIPHYSICS 1Thursday, October 4, 10:30AM
Commonwealth Ballroom 3
Free Surface Deformation of the Weld Pool in Orbital Narrow Gap GTA Welding
S. Morville1, V. Bruyere2, P. Namy2
1Framatome Centre Technique, Le Creusot, France 2SIMTEC, Grenoble, France
12
USER PRESENTATIONSThese user presentations happen simultaneously, choose the ones that most interest you!
Multiphysics Simulation of 2nd Generation 238Pu Production Designs Using the COMSOL Multiphysics® software
C. J. Hurt1, J. D. Freels1, A. Elzawawy2
1Research Reactors Division, Oak Ridge National Laboratory, Oak Ridge, TN, USA 2Vaughn College of Aeronautics and Technology, East Elmhurst, NY, USA
Using the COMSOL Multiphysics® software for simulation of TEGs for Waste Thermal Energy Harvesting
L. Howard1, D. Tafone2, D. Grbovic1, A. Pollman1
1Naval Postgraduate School, Monterey, CA, USA 2Ramapo College of New Jersey, Mahwah, NJ, USA
Simulation of Magnetically Driven Peristaltic Pumps for Microfluidic Applications
L. Gritter1, J. Crompton1, K. Koppenhoefer1, P. Nath2
1AltaSim Technologies, Columbus, OH, USA 2Applied Modern Physics, Los Alamos National Lab, Los Alamos, NM, USA
Geologic Carbon Storage: Implications of Two-Phase Flow on Injection-Induced Stress on Faults
S. Prasun¹, S. Kim², S. A. Hosseini³
¹Louisiana State University, Baton Rouge, LA, USA ²Department of Civil Engineering University of Nebraska - Lincoln, Omaha, NE, USA ³Bureau of Economic Geology, University of Texas - Austin, Austin, TX, USA
A Prediction of Energy Piles’ Long-Term Operation Using a Coupled Thermo-Hydro-Geomechanical Model
T. Vu1, L. Medina1, D. de la Cruz1, J. Ramirez1, B. Xu1
1University of Texas - Rio Grande Valley, Edinburg, TX, USA
STRUCTURAL MECHANICSThursday, October 4, 10:30AM
Commonwealth Ballroom 4
Simulation of Vibro-Thermography of a Titanium Plate
A. Kermani1, N. Elabbasi1, Z. Ouyang2
1Veryst Engineering, Needham, MA, USA 2Pratt & Whitney, East Hartford, CT, USA
Thermal and Hydraulic Modeling of Road Tunnel Joints
C. H. Klotoé1, F. Duhaime1, L. Guizani1
1Département de Génie de la Construction, École de technologie supérieure, Montréal, QC, Canada
Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software
K. Leung1, A. Imanian1
1Technical Data Analysis, Inc., Falls Church, VA, USA
Tribological Behavior of Rubber on Glass in Prefilled Syringes
T. Langley1, E. Gutierrez-Miravete2
1Rensselaer Polytechnic Institute, Troy, NY, USA 2Rensselaer at Hartford, Hartford, CT, USA
Study of Glass Delayed Elasticity with Viscoelastic Modeling in the COMSOL Multiphysics® software
Z. Zheng1
1Corning Incorporated, Corning, NY, USA
The Roberval Balance
D. W. Pepper 1 , Z. J. Olsen 1 , L. J. Olsen 1
1 University of Nevada - Las Vegas, Las Vegas, NV, USA
TEACHING AND SIMULATION METHODSThursday, October 4, 10:30AM
Salon F
Multidisciplinary Simulation Based Learning Enhancement Module
A. K. Datta1, M. Ukidwe1, A. Warning1, K. Bhunia 1
1Cornell University, Ithaca, NY, USA
Generation of SFQ-Pulses in SNS-Junctions: Learning Physics using the COMSOL Multiphysics® software
A. M. Gulian1, G. Melkonyan2
1Advanced Physics Laboratory, Chapman University, Burtonsville, MD, USA 2GMLabs, Quebec, QC, Canada
Foundational Undergraduate Teaching and Research Tools In Thermoelectrics Using COMSOL Multiphysics®
D. Buna¹, L. Hoxha¹, D. Tafone¹
¹School of Theoretical and Applied Science, Engineering Physics, Ramapo College of New Jersey, Mahwah, NJ, USA
BATTERIES AND ELECTROCHEMISTRYThursday, October 4, 1:00PM
Commonwealth Ballroom 1
Modeling Electrochemical Reactions at a Nanochannel-Confined Bipolar Electrode
A. Eden1, K. Scida1, N. Arroyo1, J. C. T. Eijkel2, C. D. Meinhart1, S. Pennathur1
1University of California - Santa Barbara, Santa Barbara, CA, USA 2University of Twente, Enschede, Netherlands
Design of an Electro-Osmotic Microfluidic Mixer
T. Eppes1, I. Milanovic1, S. Keilich1
1University of Hartford, West Hartford, CT, USA
13
Accelerate your COMSOL Multiphysics® Simulation through HPC in the Cloud
October 4 at 9:00AM | Join us for an informative hands-on workshop on how engineers and scientists are overcoming the constraints of traditional engineering resources and processes by deploying multiphysics simulations and apps to the cloud.
www.rescale.com
USER PRESENTATIONSThese user presentations happen simultaneously, choose the ones that most interest you!
Numerical Evaluation of the Polarizability Tensors of Stem Cells with Realistic 3D Shapes
S. Baidya1, A. M. Hassan1, B. A. Pazmiño Betancourt2, J. F. Douglas2, E. J. Garboczi3
1Computer Science Electrical Engineering Department, University of Missouri - Kansas City, Kansas City, MO, USA 2Materials Science and Engineering Division, National Institute of Standards and Technology, Gaithersburg, MD, USA 3Applied Chemicals and Materials Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
Infl uence of a Porous Corrosion Product Layer on the Corrosion Phenomenon of Carbon Steel Pipelines
M. Mohamed-Saïd1, P. Namy1
1SIMTEC, Grenoble, France
Development and Analysis of Solid-State Batteries through Implementation of the COMSOL® Platform
J. Neyra1, R. Acacio1, S. Miorana1, T. Garrison1, C. Coddington1, C. Scaduto1, K. Baldwin1, R. Integlia1
1Florida Polytechnic University, Lakeland, FL, USA
Fast Charging Strategy Optimization based on Electrochemical Model and Dynamic Programming for a Lithium-ion Battery Cell
M. Xu¹, X. Wang¹
¹Department of Mechanical Engineering, Oakland University, Rochester, MI, USA
BIOMEDICAL APPLICATIONS 2 AND MICROFLUIDICSThursday, October 4, 1:00PM
Charles River West
A Microfl uidic Platform for Electrochemical Concentration and Detection
C. F. Ivory1, D. E. Molina1
1Washington State University, Pullman, WA, USA
Toward Nano-Scale Scanning Electrochemical Microscopy of Single Live Cells by Means of the COMSOL Multiphysics® software
Z. Ding1, F. P. Filice1, M. S. M. Li1
1Department of Chemistry, University of Western Ontario, London, ON, Canada
Analyzing Fluid Shear Stress in the RCCS: Applications for 3D Cell Culture in Simulated Microgravity
T. Masiello1, A. Dhall1, L. P. Madhubhani Hemachandra1, N. Tokranova1, J. Castracane1
1Colleges of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, NY, USA
Nonhomogeneous Heat Transfer Simulation Using a Female Human Model
M. Castellani1, T. Rioux1, X. Xu1
1U.S. Army Research Institute of Environmental Medicine, Natick, MA, USA
Development of Electrochemical Methods for Differentiation of the Catecholamine Neurotransmitters
I. Fritsch1, M. Abrego Tello1
1University of Arkansas, Fayetteville, AR, USA
Simulating 200 kHz AC Tumor-Killing Fields with COMSOL Multiphysics®
K. W. Carlson1, N. Paudel2, S. Dokos3, J. A. Tuszynski4
1Beth Israel Deaconess Medical Center - Harvard Medical School, Boston, MA, USA 2IEEE, Greenville, NC, USA 3University of New South Wales, Sydney, NSW, Australia 4University of Alberta, Edmonton, AB, Canada
HEAT TRANSFERThursday, October 4, 1:00PM
Charles River East
Evaporative Cooling in Solar Absorption Chiller
J. Ma1, M. J. Suh1
1Sam Houston State University, Huntsville, TX, USA
Thermal Bridging Calculation of Three Steel Stud Wall Assemblies with Benchmarking
M. Ghobadi1
1National Research Council Canada, Ottawa, ON, Canada
Laser-Material Interaction Modeling using the COMSOL Multiphysics® Software
E. C. Chevallier1, V. Bruyère1, P. Namy1
1SIMTEC, Grenoble, France
Improving Thermal Effect on Biological Tissue using Multiphysics Simulation and Shape Optimization
A. Ward1
1System Insight Engineering, Centennial, CO, USA
Modeling Heat Transfer Through Filament Yarns by Random Geometry Creation
N. Anand1, W. J. Jasper1, E. DenHartog1
1North Carolina State University, Raleigh, NC, USA
MEMS, PIEZOELECTRONICS, AND ACOUSTICSThursday, October 4, 1:00PM
Commonwealth Ballrooom 2
Augmentor Combustion Instability with the COMSOL Multiphysics® software
V. G. Shaw1, J. D. Clabbers1, E. J. Gutmark1
1University of Cincinnati, Cincinnati, OH, USA
1414
[email protected] synopsys.com/simpleware
Simpleware Software Solutions 3D Image Visualization, Analysis and Model Generation
Attend the Simpleware MinicourseFrom 3D Images to ModelsWed, October 3, 2018 @2:30-3:30
USER PRESENTATIONSThese user presentations happen simultaneously, choose the ones that most interest you!
Active Control of MEMS Resonator Parameters via Electromechanical Feedback
M. Hodjat-Shamami1, F. Ayazi1
1Georgia Institute of Technology, Atlanta, GA, USA
On The Directional Response of Multi-Driver Column Loudspeaker Confi gurations Using FEA and BEM
R. Balistreri1
1Klipsch Group, Inc, Indianapolis, IN, USA
Modeling, Simulation, and Optimization of Piezoelectric Bimorph Transducer for Broadband Vibration Energy Harvesting in Two-piece Trapezoidal Approach
N. Chen1, V. Bedekar1
1Middle Tennessee State University, Murfreesboro, TN, USA
Analysis of Mechanical Sensitivity of MEMS Pressure Diaphragm for Contact Formation
S. Shubham1, M. Nawaz1
1Knowles Electronics, Itasca, IL, USA
Simulation of the Electrical Properties of Conductive ITO Thin Films by Finite Element Analysis
R. A. Gerhardt1, N. Xia1, Y. Jin1
1Georgia Institute of Technology, Atlanta, GA, USA
MULTIPHYSICS 2Thursday, October 4, 1:00PM
Commonwealth Ballroom 4
Optimal Design of Fischer-Tropsch Pilot-Scale Reactor - CFD Model
S. Arabi1, B. Dennis1
1University of Texas, Arlington, TX, USA
Numerical Studies on Heat Transfer Development inside Metal Foam: Active and Passive Cooling Systems of a Lithium Ion Battery Pack
M. Hajiyan1, M. Al-Jethelah1, M. Alomair1, S. Ebadi1, S. Mahmud1
1University of Guelph, Guelph, ON, Canada
Dissolution Modeling of Uniform Aqueous Droplets in Two-Phase Flow in a Microfl uidic Device
S. Onel1, 2, 3, 4, U. Okumus1, M. Toner2, 3, 4
1Department of Chemical Engineering, Hacettepe University, Ankara, Turkey 2Department of Surgery, Center for Engineering in Medicine, Massachusetts General Hospital, Boston, MA, USA 3Harvard Medical School, Boston, MA, USA 4Shriners Hospitals for Children - Boston, Boston, MA, USA
Effect of Duty Cycle Variation on Acoustic Pressure Field Simulation in an Ultrasound Bioreactor
A. Rahimi1, J. Crapps1, N. Case1
1Biomedical Engineering, Saint Louis University, Saint Louis, MO, USA
CdS Thin Film Transistor Threshold Voltage Shift Investigation
W. Wondmagegn1
1Frostburg State University, Frostburg, MD, USA
Plasmon Enhanced Fluorescence Characteristics Government by Selecting the Right Objective Function
M. Csete1, A. Szenes1, D. Vass1, B. Bánhelyi2, T. Csendes2, G. Szabó1
1Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary 2Department of Computational Optimization, University of Szeged, Szeged, Hungary
OPTICS, SEMICONDUCTORS, AND PLASMAThursday, October 4, 1:00PM
Commonwealth Ballroom 3
Generation of Divergence-Free Bessel-Gauss Beam from an Axicon Doublet for km-Long Collimated Laser
C. Daengngam1, S. Boonsit1, P. Kalasuwan1, P. van Dommelen1, P. Srisamran1
1Department of Physics, Faculty of Science, Prince of Songkla University, Songkhla, Thailand
Modeling of Avalanche Breakdown in Silicon and Gallium Nitride High-Voltage Diodes using COMSOL®
J. R. Dickerson1, G. W. Pickrell1, R. J. Kaplar1
1Sandia National Laboratories, Albuquerque, NM, USA
Modeling Confi nement in Quantum Dot Solar Cells
J. Liu1, M. Zubaer Hossain1
1Department of Mechanical Engineering, University of Delaware, Newark, DE, USA
Atmospheric Microwave Plasma
T. S. Marquardt1, D. F. Shewamene1, J. J. Swanson1
1Integrated Engineering, Minnesota State University, Mankato, MN, USA
Emission Characteristics of Solid State Color Centers Coupled to Plasmonic Antennae and Waveguides
M. Y. Shalaginov1, S. Bogdanov2, A. V. Kildishev2
1Massachusetts Institute of Technology, Cambridge, MA, USA 2Purdue University, West Lafayette, IN, USA
HIIPER Space Propulsion Simulation Using Plasma Module
Z.Chen¹, E. Ziehm¹, G. H. Miley¹
¹University of Illinois at Urbana-Champaign, Urbana, IL, USA
15
Veryst-Ad_8.5x3_2018.indd 4 8/22/18 10:25 AM
POSTER SESSION
Coupled Optical and Thermal Modeling of Novel Solar Thermal Collectors
A. Hassanzadeh1, Y. Bhusal1
1University of California - Merced, Merced, CA, USA
Analyzing Fluid Shear Stress in the RCCS: Applications for 3D Cell Culture in Simulated Microgravity
T. Masiello1, A. Dhall1, L. P. Madhubhani Hemachandra1, N. Tokranova1, J. Castracane1
1Colleges of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, NY, USA
When Precise Numerical Predictions Come to the Rescue of Liquid Lubrication
J. D. Wheeler1, V. Bruyere1, P. Namy1
1SIMTEC, Grenoble, France
Elucidating the Mechanisms of Charge and Temperature Modulated Ionic Transport in Nanochannels
G. Zhang1, Y. Zhao1
1Department of Biomedical Engineering, University of Kentucky, Lexington, KY, USA
Analysis of Mechanical Sensitivity of MEMS Pressure Diaphragm for Contact Formation
S. Shubham1, M. Nawaz1
1Knowles Electronics, Itasca, IL, USA
Modeling Electrochemical Reactions at a Nanochannel-Confined Bipolar Electrode
A. Eden1, K. Scida1, N. Arroyo1, J. C. T. Eijkel 2, C. D. Meinhart1, S. Pennathur1
1University of California - Santa Barbara, Santa Barbara, CA, USA 2University of Twente, Enschede, Netherlands
Computational Modeling of Diffusion-Based Transport from Differing Designs of Drug-Containing Sutures
S. Jorgensen1, J. R. Sanders1, Y. W. Liu1
1Tennessee Technological University, Cookeville, TN, USA
Atmospheric Microwave Plasma
T. S. Marquardt1, D. F. Shewamene1, J. J. Swanson1
1Integrated Engineering, Minnesota State University, Mankato, MN, USA
Multi-objective Optimization of Microneedle Design for Transdermal Drug Delivery
M. Sarmadi1, K. McHugh1, R. Langer1, A. Jaklenec1
1David H. Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology, Cambridge, MA, USA
Modeling, Simulation, and Optimization of a Piezoelectric Bimorph Transducer for Broadband Vibration Energy Harvesting in Two-piece Trapezoidal Approach
N. Chen1, V. Bedekar1
1Middle Tennessee State University, Murfreesboro, TN, USA
Comprehensive Numerical Modeling of Filamentary RRAM Device
D. Niraula1, V. Karpov1
1University of Toledo, Toledo, OH, USA
Laser-Material Interaction Modeling using the COMSOL Multiphysics® Software
E. C. Chevallier1, V. Bruyère1, P. Namy1
1SIMTEC, Grenoble, France
Simulation of the Electrical Properties of Conductive ITO Thin Films by Finite Element Analysis
R. A. Gerhardt1, N. Xia1, Y. Jin1
1Georgia Institute of Technology, Atlanta, GA, USA
On The Directional Response of Multi-Driver Column Loudspeaker Configurations Using FEA and BEM
R. Balistreri1
1Klipsch Group, Inc, Indianapolis, IN, USA
Simulation of an Ethane Steam Cracking Reactor for Ethane-Propane Mixtures
R. Martinez1, J. A. Galán2, Y. Amaya1, H. S. Arenas1
1Universidad Industrial de Santander, Bucaramanga, Santander, Colombia 2Empresa Colombiana de Petróleos, Barrancabermeja, Santander, Colombia
Finite Element Modeling of a Microwave Cavity under Resonant Conditions
T. W. Krause1, F. Liu1, S. Gauvin2
1Department of Physics and Space Science, Royal Military College, Kingston, ON, Canada 2Department of Physics, Engineering Physics and Astronomy, Queens University, Kingston, ON, Canada
Development and Analysis of Solid-State Batteries through Implementation of the COMSOL® Platform
J. Neyra1, R. Acacio1, S. Miorana1, T. Garrison1, C. Coddington1, C. Scaduto1, K. Baldwin1, R. Integlia1
1Florida Polytechnic University, Lakeland, FL, USA
Simulating 200 kHz AC Tumor-Killing Fields with COMSOL Multiphysics®
K. W. Carlson1, N. Paudel2, S. Dokos3, J. A. Tuszynski4
1Beth Israel Deaconess Medical Center - Harvard Medical School, Boston, MA, USA 2IEEE, Greenville, NC, USA 3University of New South Wales, Sydney, NSW, Australia 4University of Alberta, Edmonton, AB, Canada
Join us on Thursday evening at 6:00PM to meet the authors. Don't forget to vote for your favorite poster!
16
Implication of COMSOL® to Laser Powered Non-Isothermal Reactors for Pyrolysis in the Gas Phase
D. Kekejian1, L. Khachatryan2, M. Barekati-Goudarzi3, D. Boldor3
1Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA, USA 2Department of Chemistry, Louisiana State University, Baton Rouge, LA, USA 3Department of Biological & Agricultural Engineering, Louisiana State University Agricultural Center, Baton Rouge, LA, USA
Modeling a Concentrated Solar Thermal Collector for Methane Dry Reforming
S. Verma1, N. Hotz1
1Duke University, Durham, NC, USA
Mechanistic Understanding of Food Microbiological Safety: Multiphase Transport Through a Leaf Stomate During Vacuum Cooling
M. Ranjbaran1, A. K. Datta1
1Cornell University, Ithaca, NY, USA
Load Noise Calculation of a Three-Phase Power Transformer
C. S. Lin1
1Pitotech. Co Ltd., Changhua City, Changhua, Taiwan
A 3D Simulation of the Diffusion Profile of Brain Derived Neurotrophc Factor in the Inner Ear Using COMSOL Multiphysics®
Software
S. Bharadwaj1, A. Oleksijew1, J. Fernandez2, C. Miller1, K. Coots1, K. Nella1, H. T. Chang1, C. P. Richter1,3, J. Kessler1, A. Matsuoka1
1Feinberg School of Medicine, Northwestern University, Chicago, IL, USA 2Department of Chemical Engineering, Northwestern University, Chicago, IL, USA 3Resonance Medical, LLC., Chicago, IL, USA
Process Intensification Efforts towards Efficient, Modular, Solar-Thermochemical Production of Liquid Fuels
L. Freiberg1, M. Coblyn1, G. Jovanovic1, N. AuYeung1
1Oregon State University, Corvallis, OR, USA
Analysis of D-Shaped Toroidal Superconductive Coils for Medium Size Fusion Experiment Facility
V. Cocilovo1
1ENEA Frascati Research Center, Frascati, Italy
Several Hydrodynamic Instabilities Illustrated Using the COMSOL Multiphysics® Software
C. F. Ivory1
1Washington State University, Pullman, WA, USA
Implementation of a Viscoelastic Model to Generate a Shear Stress Test Using the DEVSS/SUPG Method
A. Amos Benchimol1, C. Dubois1, F. Bertrand1, D. Vidal1
1Ecole Polytechnique of Montréal, Montréal, QC, Canada
3D Modeling of Transformation Optics based Flattened Luneburg Lens Using the COMSOL Multiphysics® Software
S. Biswas1, M. S. Mirotznik1
1University of Delaware, Newark, DE, USA
Influence of a Porous Corrosion Product Layer on the Corrosion Phenomenon of Carbon Steel Pipelines
M. Mohamed-Saïd1, P. Namy1
1SIMTEC, Grenoble, France
Damage Simulation of Fracture Asperity in Geothermal Systems
C. Zeng1, W. Deng1
1Missouri University of Science and Technology, Rolla, MO, USA
A Heat Transfer Analysis of the Cochlea During Magnetically-guided Cochlear Implant Surgery
F. Esmailie¹, M. Francoeur¹, T. A. Ameel¹
¹Department of Mechanical Engineering, University of Utah, Salt Lake City, UT, USA
Development of Electrochemical Methods for Differentiation of the Catecholamine Neurotransmitters
I. Fritsch1, M. Abrego Tello1
1University of Arkansas, Fayetteville, AR, USA
Modeling Confinement in Quantum Dot Solar Cells
J. Liu1, M. Zubaer Hossain1
1Department of Mechanical Engineering, University of Delaware, Newark, DE, USA
Flow Modeling in Long Surface Patterned Micromixers Using Division in Multiple Geometrical Subunits
J. Clark1, T. A. Butt1, G. Mahajan2, C. R. Kothapalli2, M. Kaufman1, P. S. Fodor1
1Department of Physics, Cleveland State University, Cleveland, OH, USA 2Department of Chemical and Biomedical Engineering, Cleveland State University, Cleveland, OH, USA
Simulating Survival and Insulin Secretion in Pancreatic Islet Tissue Constructs
E. Han1, L. E. Niklason1
1Department of Biomedical Engineering, Yale University, New Haven, CT, USA
Adaptive Mesh Refinement: Quantitative Computation of a Rising Bubble Using COMSOL Multiphysics®
T. Preney1, P. Namy1, J. Wheeler1
1SIMTEC, Grenoble, France
A Multi-phase Heat Transfer Model of Cooling Lava
M. E. Rumpf1, K. Williams1, L. Kestay1
1Astrogeology Science Center, U.S. Geological Survey, Flagstaff, AZ, USA
Vibration and Noise Analysis of the Feather River Bridge
L. A. De Jesús Díaz1, R. Daniel Costley1, H. Díaz-Alvarez1
1Geotechnical and Structures Laboratory, U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA
Education and Business Style Innovation by Apps Created with the COMSOL Multiphysics® Software
M. Hashiguchi1, D. Mi1
1Keisoku Engineering System Co., Ltd., Chiyodaku, Tokyo, Japan
Simulation of Thin Film All-Solid-State Lithium Ion Batteries
M. Fukukawa1, L. Tong1
1Keisoku Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan
Numerical Analysis of a LiFePO4/Graphite Lithium-ion Coin-cell Battery
L. Tong1
1Keisoku Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan
Time-dependent Thermoelectric Switching in Vanadium Oxide
G. Àbel1, F. Torres1, M. Kiwi1
1Universidad de Chile, Santiago, Región Metropolitana, Chile
Micro-Particle Manipulation Using Asymmetric Acousto-Fluidic Devices
A. Tahmasebipour1
1University of California - Santa Barbara, Santa Barbara, CA, USA
Dynamic Analysis of a Roller Compacted Concrete Dam
H. Diaz-Alvarez1, L. De Jesus-Diaz1, M. H. McKenna1
1U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA
POSTER SESSIONJoin us on Thursday evening at 6:00pm to meet the authors. Don't forget to vote for your favorite poster!
17
Magnetic Control of Deformation of a Ferrofluid Droplet in Simple Shear Flow
C. Wang1, M. R. Hassan1
1Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology, Rolla, MO, USA
Catalytic Oxidative Dehydrogenation of Propane to Propylene
E. B. Ledesma1
1University of St. Thomas, Houston, TX, USA
Multiphysics Simulation of an Ultrasonic Piezoelectric Motor
P. Carvalho1, C. Nycz1, K. Gandomi1, G. Fischer1
1Worcester Polytechnic Institute, Worcester, MA, USA
Relativistic Quantum Mechanical Wave Functions for Fermion Particles in Electric or Magnetic Fields
A. J. Kalinowski1
1Consultant / East Lyme, CT, USA
The Effect of Aluminum Content on Convective Flow of Molten Metal Generated by Arc Plasma
Y. T. Cho1, C. K. Kim1, H. U. Hong1
1Changwon National University, Changwon, Gyeongsangnam-do, South Korea
Analyzing Electromagnetic Modes of Integrated Busbars Implemented as Printed Circuit Boards (PCB)
A. Pokryvailo1
1Spellman High Voltage Electronics Corp., Hauppauge, NY, USA
Electrical Energy Harvesting from Body Heat: Indirect Conversion via Mechanical Vibration
S. Shin1, H. Mojtaba1, F. Ayazi1
1Georgia Institute of Technology, Atlanta, GA, USA
Resonance Frequency of a Helmholtz Resonator
R. Hill1, M. Mendieta1, P. Bruce1, E. Stokes1
1Electrical and Computer Engineering Department, University of North Carolina - Charlotte, Charlotte, NC, USA
Modeling the Effects of Bipolar Pulsed Electrochemical Machining Coupled with a Magnetic Field
C. Bradley1
1Benét Laboratories, U.S. Army RDECOM-ARDEC, Watervliet, NY, USA
POSTER SESSION
Computational Fluid Dynamic Study of Fixed Bed Reactor of Hydrotreating of Vegetable Oil
N. Casillas1, L. Olivo1
1Instituto Politécnico Nacional, Ciudad de México, México
COMSOL Multiphysics® as a Tool for Biomedical Engineering Students to Harness Physical Processes
J. Bush1
1Old Dominion University, Norfolk, VA, USA
Simulating Specular Reflectance in Solar Cleaning Films using the Particle Tracing Module of the COMSOL Multiphysics® Software and LiveLink™ for MATLAB®
J. Bone1, C. Morales1, R. Eriksen1, M. Mazumder1, M. Horenstein1
1Electrical and Computer Engineering, Boston University, Boston, MA, USA
3D Unsteady CFD Simulation of Seasonal Solar Thermochemical Heat Storage System for Buildings
W. Yaïci¹, E. Entchev¹
¹CanmetENERGY Research Centre, Natural Resources Canada, Ottawa, ON, Canada
Design and Simulation of 3D Printed Check Valves Using Fluid-Structure Interaction
A. M. Melvin¹, T. J. Roussel¹
¹Department of Bioengineering, J.B. Speed School of Engineering, University of Louisville, Louisville, KY, USA
Analysis of the Cyclability of Lithium-polymer Batteries
J. M. Paz-Garcia¹, M. D. Villen-Guzman¹, D. Zaura-Campos¹, A. N. Alshawabkeh², C. Gomez-Lahoz¹
¹University of Málaga, Málaga, Spain ²Northeastern University, Boston, MA, USA
The Effect of Microchannel Geometry on Dispersing Solute Asymmetries
A. Taylor¹, D. Harris¹
¹Brown University, Providence, RI, USA
Calculation of the Helmholtz Resonator Using COMSOL® in an Acoustic Lecture
Y. Koike¹, M. Hashiguchi², D. Mi²
¹Department of Electronic Engineering, College of Engineering, Shibaura Institute of Technology, Koto, Tokyo, Japan ²Engineer Division¹, Keisoku Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan
Steady-State and Transient Electrothermal Simulation of Microheater for Gas Sensing
A. N. Radwan¹, M. Mehregany¹
¹Case Western Reserve University, Cleveland, OH, USA
Rough Surface Modeling of PDMS Polymer through Fractal Dimension
D. Altuve¹, G. Fernandez¹, L. Paredes²
¹Circuits and Electronics Department, Universidad Simón Bolívar, Caracas, Miranda, Venezuela ²Faculty of Electronic and Biomedical Engineering, Universidad Antonio Nariño, Tunja, Colombia
Flotation Height in 'Air Hockey' Spatial Atomic Layer Deposition
J. Grasso¹, B. Willis¹
¹Department of Chemical and Biomolecular Engineering, University of Connecticut, Storrs, CT, USA
COMSOL® Modeling and Tensile Loading of Aluminum Material Test Samples
J. L. Palladino1
1Trinity College, Hartford, CT, USA
COMSOL® Analysis-Led Design of Prototype Coil Program for Bi-2212 Coils
E. Bosque1, U. Trociewitz1
1Applied Superconductivity Center - National High Magnetic Field Laboratory, Tallahassee, FL, USA
Evaluating Clean Bench Designs Using CFD and Particle Tracing
A. Johnson1, M. Wright1
1Honeywell FM&T, Kansas City, MO, USA
Knowledge and Skills Acquisition via a “Parallel” Problem Solving Approach
J. R. Sanders1, S. N. Jorgensen1
1Tennessee Technological University, Cookeville, TN, USA
Thermoelectric Generators With Double Cooling And Novel Thermoelectric Materials
D. Buna1, L. Hohxa1, D. Tafone1
1Engineering Physics, School of Theoretical and Applied Science, Ramapo College of New Jersey, Mahwah, NJ, USA
Improving Nuclear Safety through Multiphysics Modeling and Simulations
P.K. Jain¹
Oak Ridge National Laboratory, Oak Ridge, TN 37831 USA
Geologic Carbon Storage: Implications of Two-Phase Flow on Injection-Induced Stress on Faults
S. Prasun¹, S. Kim², S. A. Hosseini³
¹Louisiana State University, Baton Rouge, LA, USA ²Department of Civil Engineering University of Nebraska - Lincoln, Omaha, NE, USA 3 Bureau of Economic Geology, University of Texas - Austin, Austin, TX, USA
Join us on Thursday evening at 6:00pm to meet the authors. Don't forget to vote for your favorite poster!
18
POSTER SESSIONJoin us on Thursday evening at 6:00pm to meet the authors. Don't forget to vote for your favorite poster!
Seat Motor Design Optimization
S. Qi¹, H. Cheng¹, L. Yang¹
¹Dare Auto, Inc., Plymouth, MI, USA
HIIPER Space Propulsion Simulation Using Plasma Module
Z.Chen¹, E. Ziehm¹, G. H. Miley¹
¹University of Illinois at Urbana-Champaign, Urbana, IL, USA
Modeling the Electric Double Layer in Finite Electrolyte Solutions
J. C. Woehl¹
¹University of Wisconsin - Milwaukee, Milwaukee, WI, USA