composite limiting heights a better … greater limiting heights, better screw retention, and easier...

In 2006, ExpediusTM was formed as New Jersey based Marino\WARE joined with California based CEMCO to create the largest strategic alliance in cold-formed steel manufacturing. Both Marino\WARE and CEMCO share a unique commitment to customer satisfaction in metal framing with a focus on quality, service and innovation. Together, their manufacturing facilities and corporate office locations create an efficient network for national development and distribution of ViperStudTM.

Norbet Trucking is the number one carrier of Expedius products for both MarinoWARE and CEMCO, delivering Nationwide.

TECHNICAL PRODUCT GUIDECEMCO1001-A Pittsburg Antioch HwyPittsburg, CA 94565P: 925.473.9340F: 925.473.9341

CEMCO263 N Covina LaneCity Of Industry, CA 91744P: 800.775.2362F: 626.330.7598

CEMCO490 Osage StreetDenver, CO 80204P: 303.572.3626F: 303.572.3627

Marino\WARE®10101 Bay Area Blvd.Pasadena, TX 77507P: 800.852.9510F: 281.283.8105

Marino\WARE®4245 Railroad AveEast Chicago, IN 46312P: 219.378.7100F: 219.378.7106

Marino\WARE®400 Metuchen RdSouth Plainfield, NJ 07080P: 800.627.4661F: 908.412.1442

Marino\WARE®777 Greenbelt PkwyGriffin, GA 30223P: 800.504.8199F: 678.688.1379

PATENT PENDING DRYWALL SYSTEM

3. 100% FLAT STEELThe flat steel requires no extra training or special fasteners for installation. ViperStudTM is interchangeable with conventional framing components, and is easy to plumb, laser level and mark. There’s no learning curve for trades and inspectors because ViperStudTM installs exactly the same as conventional studs.

4. THE STRONGEST DRYWALL STUD The ViperRibTM technology helps to prevent "high shoulders" when finishing gypsum board and makes ViperStudTM much stronger, stiffer, and less prone to twist than the dimpled alternative product.

5. FULLY TESTED, ASTM COMPLIANTViperStudTM conforms to the following ASTM standards: • ASTM C-645 “Standard Specification for Nonstructural Steel Framing Members” • ASTM C-754 “Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products” • ASTM E-72 “Standard Test Methods of Conducting Strength Tests of Panels for Building Construction”• ASTM E-119 “Standard Test Methods for Fire Tests of Building Construction and Materials” Fire Tested for 1 and 2 hour rated walls, with 5/8” Type “X” Gypsum Board. - Warnock-Hersey Design No. MW/WA 60-04 Assembly Rating: 1 hour wall assembly non-load bearing - Warnock-Hersey Design No. MW/WA 120-04 Assembly Rating: 2 hour wall assembly non-load bearing

1. ONE TRACK SYSTEMViperTrackTM is a high strength one track system, and works with both Viper20TM and Viper25TM studs. This eliminates SKU's from your inventory. ViperTrackTM is 100% HEMMED, making it safer than any other product offered.

2. BETTER SCREW RETENTIONIndependent laboratory testing proves ViperStudTM has a 20% greater screw retention than the dimpled alternative products. Our tests show 139 lbs of pullout force required versus only 116 lbs on the competitor’s product. No more screw spin outs to slow down your job or call backs on completed projects.

COMPARE THEDIFFERENCE

The following gypsum board manufacturers are listed as suitable with the ViperStud System in our Warnock-Hersey 1hr & 2hr Design Assemblies: • American Gypsum• CertainTeed Gypsum• CGC Inc.• Federal Gypsum Company• GP Gypsum• Lafarge North America• National Gypsum Co.• PACO Gypsum• Temple-Inland• United States Gypsum

2008This technical information reflects the most current information available and supersedes any and all previous publications

effective February 15, 2008 #MW-VS-02/2008

WARRANTY & LIMITATIONSAll products presented herein are warranted to the buyer to be free from defects in material and workmanship.The foregoing warranty is non-assignable and in lieu of and excludes all other warranties not expressly set forth herein, whether express or implied by operation of law or otherwise, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. All details and specifications presented herein are intended as a general guide for the use of Marino\WARE® framing systems. These products should not be used without evaluation by a qualified engineer or architect to determine their suitability for a specific use.

Marino\WARE® assumes no responsibility for failure resulting from use of its details or specifications, or for failure resulting from improper application or installation of these products.GOVERNING LAWAll issues arising in connection with your order and all transactions associated with it shall be interpreted according to the laws of the State of New Jersey, and all actions or other proceedings arising out of such issues shall be brought only in Superior Court, State of New Jersey, County of Essex, or United States District Court for the District of New Jersey. No action may be brought more than one year after accrual of the cause of action therefore.

SCREW RETENTIONFOR 3 5/8” STUD (25 ga. equivalent)

Finally, a stronger steel drywall framing stud and track, without all the speed bumps. It’s unique ability to outperform typical conventional and dimpled studs makes ViperStudTM the next generation in flat steel drywall framing products.

We’ve put forth a tremendous effort to develop a product that requires NO learning curve. After 18 months of extensive lab testing, field-testing, and design changes the revolutionary new ViperStudTM and ViperTrackTM was created. The patent pending ViperStud System is one of the most rigorously tested products the drywall framing market has ever seen. Thousands of hours were spent modeling and testing prototypes to make a drywall stud system that can live up to the demands of contractors and builders in the field.

ViperStudTM is the result of a forming process developed to strengthen the flat stud design, without the hassles that come with the alternative. Its ribbed flange and web, called ViperRib™, makes Viper the toughest performing drywall stud available; increasing its rigidity and strength, and helps to prevent "high shoulders" when finishing gypsum board. Even more exceptional is the high strength ViperTrackTM system. The single thickness ViperTrackTM system works with both Viper20TM and Viper25TM studs and is 100% hemmed, reducing the risk of injury from sharp edges. With greater limiting heights, better screw retention, and easier and safer installation, the ViperStud SystemTM is sure to become the preferred framing product for drywall contractors.

THE STRONGERFLAT DRYWALL STUD

A BETTER PERFORMINGDRYWALL STUD AND TRACK

ViperStudTM is an improved steel drywall framing stud and track system. Formed for extra strength and better screw retention, ViperStudTM is proven through laboratory testing to be the better performing drywall stud and track over traditional or the dimpled alternative.

www.MarinoWare.com


EASILY IDENTIFIES• Manufacturer• Steel thickness• Steel strength• Code information• Part number

INKJET LABELINGELIMINATES CONFUSION IN THE FIELD

FLAT WEB!

1. Q: ASTM C 645 – 07 SPECIFIES A DESIGN THICKNESS FOR 25 GAUGE DRYWALL STUDS AS .0188”, YET VIPERSTUDTM IS .0155” DESIGN THICKNESS, HOW DOES THIS MEET THE STANDARD?A: ASTM C-645 – 07 Section 9.2 says “members that can show independently verified test performance that meets the limiting heights values listed in ASTM C-754 need not meet the minimum thickness limitation set forth in section 4.3 or the section properties in section 8.1.” ViperStudTM has proven this in testing.

2. Q: CAN VIPERSTUDTM BE USED WITH CONVENTIONAL TRACK AND STUD?A: ViperStudTM is 100% FLAT steel and can be mixed with conventional inventory.

3. Q: VIPERTRACKTM CAN BE USED ON BOTH VIPER25TM & VIPER20TM STUDS, WHAT THICKNESS IS IT?A: All of our testing was conducted with 0.0155“ design thickness track so one track can be used for both studs. This system testing meets the ASTM C-645 requirement in FAQ #1 for a verified test performance.

4. Q: VIPERTRACK IS HEMMED BUT MY MARKET USES UN-HEMMED TRACK, CAN I USE THAT WITH VIPER?A: Conventional un-hemmed track works with ViperStudTM.

5. Q: WILL I STILL BE ABLE TO BUY CONVENTIONAL DRYWALL FRAMING FROM MY MARINO\WARE PLANT?A: We will eventually convert all lines to ViperStudTM, but this will take time to complete. We will make conventional framing available for jobs that started with conventional and want to finish with it.

6. Q: I HAVE A JOB THAT IS SPECIFIED MINIMUM .0179” AND IT CAN’T BE CHANGED, CAN I GET VIPERSTUD IN A .0179” THICKNESS?A: ViperStudTM can be made to order in a 0.0179” thickness, but there will be an up charge over the typical pricing.

7. Q: IS AN INTERTEK LISTING THE SAME AS A UL LISTING?A: ViperStudTM was tested with Intertek Testing Labs, the Intertek listing meets the same standards of a UL listing.

FAQ’S:

FULLY TESTED PRODUCTViperStudTM has been tested extensively with Intertek Testing Labs; recognized worldwide as one of the premier testing labs under OSHA’s Nationally Recognized Testing Laboratory (NRTL) Program. All fire testing is listed with the Warnock-Hersey mark. Our products are independently tested and meet minimum requirements of widely accepted product safety standards. This mark is used and accepted by manufacturers, retailers, distributors and authorities having jurisdiction around the world. In addition, ViperStudTM is listed with the NYC Department of Buildings, MEA# 56-08-M.


effective March 1, 2008 #MW-VS-03/2008

VIPERTRACKTM

(Suitable for Viper20TM and Viper25TM studs)

Yield Strength• 50 ksi

Design Thickness• 0.0155”

Minimum Thickness• 0.0147”

Coating• G40 or equivalent per ASTM C-645

Track Web Sizes (inside dimensions) • 1-5/8”, 2-1/2”, 3-5/8, 4” and 6”

VIPERSTUDTM

Yield Strength• 50 ksi for Viper25TM

• 45 ksi for Viper20TM

Design Thicknesses• Viper25TM is 0.0155”• Viper20TM is 0.0245“

Minimum Thicknesses• Viper25TM is 0.0147”• Viper20TM is 0.0233“


Stud Web Sizes• 1-5/8”, 2-1/2”, 3-5/8”, 4” and 6”

Knockout Sizes• 1-5/8” stud = 3/4” x 1-3/4”• 2-1/2”, 3-5/8”, 4“ and 6” stud = 1-1/2” x 2-1/2”

QUICK FACTS• Knurled flange helps prevent screws from slipping• ViperRibTM technology enhances strength• Flat web mixes well with flat steel inventory• ViperTrack works with Viper20TM and Viper25TM studs• 100% hemmed track reduces the risk of injury• Patent Pending drywall-framing system

KNURLED FLANGE VIPERRIBTM HEMMED TRACK


COMPOSITE LIMITING HEIGHTS(1 layer 5/8” thick gypsum wallboard)

Notes:A. f = Flexural stress controls allowable wall heightB. Viper composite limiting heights based on single layer of 5/8" thick gypsum board full height on each side with screws spaced 12" o.c. to framing members as per ASTM C-754

1-5/8” VIPERSTUDTM


4” VIPERSTUDTM

6” VIPERSTUDTM

L/120 15' 7"f13' 6"f11' 0"f

17' 4"f15' 0"f12' 3"f

L/120 17' 0"f14' 9"f12' 0"f

21' 6"19' 3"f15' 8"f

L/120 21' 8"18' 3"f14' 11"f

23' 1"21' 2"18' 7"

L/120 21' 8"f18' 9"f15' 4"f

27' 10"f24' 1"f19' 8"f

L/120 26' 5"f22' 11"f18' 8"f

32' 0"29' 6"f24' 1"f

Viper25TM (0.0155“ Design Thickness) 12”16”24”Viper20TM (0.0245” Design Thickness)12”16”24”

Viper25TM (0.0155“ Design Thickness)12”16”24”Viper20TM (0.0245“ Design Thickness) 12”16”24”

Viper25TM (0.0155“ Design Thickness) 12”16”24”Viper20TM (0.0245“ Design Thickness)12”16”24”


Viper25TM (0.0155“ Design Thickness)12”16”24”Viper20TM (0.0245“ Design Thickness)12”16”24”

L/240 13' 11"12' 8"11' 1"

15' 4"13' 11"12’ 2"

L/240

17' 0"f14' 9"f12' 0"f

17' 1"15' 6"13' 7"

L/240 17' 2"16' 0"13' 10"

18' 4"16' 9"14' 9"

L/240 20' 9"18' 9"f15' 4"f

22' 9"20' 8"18' 1"

L/240 25' 11"22' 11"f18' 8"f

26' 4"23' 11"20' 11"

L/360 12' 2"11' 1"9' 8"

13' 4"12' 2"10' 7"

L/360

14' 11"13' 7"11' 10"

14' 11"13' 7"11' 10"

L/360 15' 0"13' 11"12' 1"

16' 0"14' 8"12' 11"

L/360 18' 2"16' 6"14' 5"

19' 11"18' 1"15' 10"

L/360 22' 8"20' 7"18' 0"

23' 0"20' 11"18' 3"

L/120 12' 9"f11' 0"f9' 0"f

14' 2"f12' 3"f10' 0"f

L/120

13' 11"f12’ 0”f9’ 10”f

18’ 2”f15’ 9”f12’ 10”f

L/120 18' 0"f14' 11"f12' 3"f 20' 2"18' 5"15' 5"f

L/120 17' 8"f15' 4"f12' 6"f

22' 9"f19' 8"f16' 1"f

L/120 21' 7"f18' 8"f15' 3"f 27' 10"f24' 1"f19' 8"f

L/240 12' 2"11' 1"9' 8"

13' 4"12' 2"10' 0"f

L/240

13' 11"f12' 0"f9' 10"f

14' 11"13' 7"11' 10"

L/240 15' 0"13' 11"12' 1" 16' 0"14' 8"12' 11"

L/240 17' 8"f15' 4"f12' 6"f

19' 11"18' 1"15' 10"

L/240 21' 7"f18' 8"f15' 3"f 23' 0"20' 11"18' 3"

L/360 10' 8"9' 8"8' 5"

11' 8"10' 7"9' 3"

L/360

13' 0"11' 10"9' 10"f

13' 0"11' 10"10' 4"

L/360 13' 1"12' 2"10' 7" 14' 0"12' 10"11' 3"

L/360 15' 10"14' 5"12' 6"f

17' 5"15' 10"13' 10"

L/360 19' 10"18' 0"15' 3"f

20' 1"18' 3"15' 11"

L/120 11' 0"f9' 6"f7' 10"f

12' 3"f10' 7"f8' 8"f

L/120

12' 0"f10' 5"f8' 6"f

15' 9"f13' 7"f11' 1"f

L/120 15' 7"f12' 11"f10' 7"f

18' 4"16' 3"f13' 4"f

L/120 15' 3"f13' 3"f10' 10"f

19' 8"f17' 1"f13' 11"f

L/120 18' 8"f16' 2"f13' 3"f

24' 1"f20' 10"f17' 0"f

L/240 11’ 1"10' 1"8' 9"f

12' 2"10' 7"f8' 8"f

L/240

12' 0"f10' 5"f8' 6"f

13' 7"12' 4"10' 9"

L/240 13' 8"12' 8"10' 7"f 14' 6"13' 4"11' 9"

L/240 15' 3"f13' 3"f10' 10"f

18' 1"16' 5"13' 11"f

L/240 18' 8"f16' 2"f13' 3"f

20' 11"19' 0"16' 7"

L/360 9' 8"8' 9"7' 8"

10' 7"9' 8"8' 5"

L/360 11' 10"10' 5"f8' 6"f

11' 10"10' 9"9' 5"

L/360 11' 11"11' 1"9' 7" 12' 8"11' 8"10' 3"

L/360 14' 5"13' 1"10' 10"f

15' 10"14' 4"12' 6"

L/360 18' 0"16' 2"f13' 3"f

18' 3"16' 7"14' 6"

L/120 9’ 0”f7' 10"f—

10' 0"f8' 8"f—

L/120

9' 10"f8' 6"f—

12' 10"f11' 1"f9' 1"f

L/120 12' 9"f10' 7"f8' 8"f

15' 3"f13' 4"f10' 11"f

L/120 12' 6"f10' 10"f8' 10"f

16' 1"f13' 11"f11' 4"f

L/120 15' 3"f13' 3"f10' 9"f

19' 8"f17' 0"f13' 11"f

L/240 9' 8"8' 9"f—

10' 0"f8' 8"f—

L/240 9' 10"f8' 6"f—

11' 10"10' 9"9’ 1”f

L/240 11' 11"10' 7"f8' 8"f

12' 8"11' 8"10' 3"

L/240 12' 6"f10' 10"f8' 10"f

15'10"13' 11"f11' 4"f

L/240 15' 3"f13' 3"f10' 9"f

18' 3"16' 7"13' 11"f

L/360 8' 5"7' 8"—

9' 3"8' 5"—

L/360 9' 10"f8' 6"f—

10' 4"9' 5"8' 3"

L/360 10' 5"9' 8"8' 4"

11' 1"10' 2"8' 11"

L/360 12' 6"f10' 10"f8' 10"f

13' 10"12' 6"10' 11"

L/360 15' 3"f13' 3"f10' 9"f

15' 11"14' 6"12' 8"


Finally, a stronger steel drywall framing stud and track, without all the speed bumps. It’s unique ability to outperform typical conventional and dimpled studs makes ViperStudTM the next generation in flat steel drywall framing products.

We’ve put forth a tremendous effort to develop a product that requires NO learning curve. After 18 months of extensive lab testing, field-testing, and design changes the revolutionary new ViperStudTM and ViperTrackTM was created. The patent pending ViperStud System is one of the most rigorously tested products the drywall framing market has ever seen. Thousands of hours were spent modeling and testing prototypes to make a drywall stud system that can live up to the demands of contractors and builders in the field.

ViperStudTM is the result of a forming process developed to strengthen the flat stud design, without the hassles that come with the alternative. Its ribbed flange and web, called ViperRib™, makes Viper the toughest performing drywall stud available; increasing its rigidity and strength, and helps to prevent "high shoulders" when finishing gypsum board. Even more exceptional is the high strength ViperTrackTM system. The single thickness ViperTrackTM system works with both Viper20TM and Viper25TM studs and is 100% hemmed, reducing the risk of injury from sharp edges. With greater limiting heights, better screw retention, and easier and safer installation, the ViperStud SystemTM is sure to become the preferred framing product for drywall contractors.

THE STRONGERFLAT DRYWALL STUD

A BETTER PERFORMINGDRYWALL STUD AND TRACK

ViperStudTM is an improved steel drywall framing stud and track system. Formed for extra strength and better screw retention, ViperStudTM is proven through laboratory testing to be the better performing drywall stud and track over traditional or the dimpled alternative.

www.MarinoWare.com


EASILY IDENTIFIES• Manufacturer• Steel thickness• Steel strength• Code information• Part number

INKJET LABELINGELIMINATES CONFUSION IN THE FIELD

FLAT WEB!

1. Q: ASTM C 645 – 07 SPECIFIES A DESIGN THICKNESS FOR 25 GAUGE DRYWALL STUDS AS .0188”, YET VIPERSTUDTM IS .0155” DESIGN THICKNESS, HOW DOES THIS MEET THE STANDARD?A: ASTM C-645 – 07 Section 9.2 says “members that can show independently verified test performance that meets the limiting heights values listed in ASTM C-754 need not meet the minimum thickness limitation set forth in section 4.3 or the section properties in section 8.1.” ViperStudTM has proven this in testing.

2. Q: CAN VIPERSTUDTM BE USED WITH CONVENTIONAL TRACK AND STUD?A: ViperStudTM is 100% FLAT steel and can be mixed with conventional inventory.

3. Q: VIPERTRACKTM CAN BE USED ON BOTH VIPER25TM & VIPER20TM STUDS, WHAT THICKNESS IS IT?A: All of our testing was conducted with 0.0155“ design thickness track so one track can be used for both studs. This system testing meets the ASTM C-645 requirement in FAQ #1 for a verified test performance.

4. Q: VIPERTRACK IS HEMMED BUT MY MARKET USES UN-HEMMED TRACK, CAN I USE THAT WITH VIPER?A: Conventional un-hemmed track works with ViperStudTM.

5. Q: WILL I STILL BE ABLE TO BUY CONVENTIONAL DRYWALL FRAMING FROM MY MARINO\WARE PLANT?A: We will eventually convert all lines to ViperStudTM, but this will take time to complete. We will make conventional framing available for jobs that started with conventional and want to finish with it.

6. Q: I HAVE A JOB THAT IS SPECIFIED MINIMUM .0179” AND IT CAN’T BE CHANGED, CAN I GET VIPERSTUD IN A .0179” THICKNESS?A: ViperStudTM can be made to order in a 0.0179” thickness, but there will be an up charge over the typical pricing.

7. Q: IS AN INTERTEK LISTING THE SAME AS A UL LISTING?A: ViperStudTM was tested with Intertek Testing Labs, the Intertek listing meets the same standards of a UL listing.

FAQ’S:

FULLY TESTED PRODUCTViperStudTM has been tested extensively with Intertek Testing Labs; recognized worldwide as one of the premier testing labs under OSHA’s Nationally Recognized Testing Laboratory (NRTL) Program. All fire testing is listed with the Warnock-Hersey mark. Our products are independently tested and meet minimum requirements of widely accepted product safety standards. This mark is used and accepted by manufacturers, retailers, distributors and authorities having jurisdiction around the world.



VIPERTRACKTM

(Suitable for Viper20TM and Viper25TM studs)

Yield Strength• 50 ksi

Design Thickness• 0.0155”

Minimum Thickness• 0.0147”


Track Web Sizes (inside dimensions) • 1-5/8”, 2-1/2”, 3-5/8, 4” and 6”

VIPERSTUDTM

Yield Strength• 50 ksi for Viper25TM

• 45 ksi for Viper20TM

Design Thicknesses• Viper25TM is 0.0155”• Viper20TM is 0.0245“

Minimum Thicknesses• Viper25TM is 0.0147”• Viper20TM is 0.0233“


Stud Web Sizes• 1-5/8”, 2-1/2”, 3-5/8”, 4” and 6”

Knockout Sizes• 1-5/8” stud = 3/4” x 1-3/4”• 2-1/2”, 3-5/8”, 4“ and 6” stud = 1-1/2” x 2-1/2”

QUICK FACTS• Knurled flange helps prevent screws from slipping• ViperRibTM technology enhances strength• Flat web mixes well with flat steel inventory• ViperTrack works with Viper20TM and Viper25TM studs• 100% hemmed track reduces the risk of injury• Patent Pending drywall-framing system

KNURLED FLANGE VIPERRIBTM HEMMED TRACK


COMPOSITE LIMITING HEIGHTS(1 layer 5/8” thick gypsum wallboard)

Notes:A. f = Flexural stress controls allowable wall heightB. Viper composite limiting heights based on single layer of 5/8" thick gypsum board full height on each side with screws spaced 12" o.c. to framing members as per ASTM C-754



4” VIPERSTUDTM

6” VIPERSTUDTM

L/120 15' 7"f13' 6"f11' 0"f

17' 4"f15' 0"f12' 3"f

L/120 17' 0"f14' 9"f12' 0"f

21' 6"19' 3"f15' 8"f

L/120 21' 8"18' 3"f14' 11"f

23' 1"21' 2"18' 7"

L/120 21' 8"f18' 9"f15' 4"f

27' 10"f24' 1"f19' 8"f

L/120 26' 5"f22' 11"f18' 8"f

32' 0"29' 6"f24' 1"f

Viper25TM (0.0155“ Design Thickness) 12”16”24”Viper20TM (0.0245” Design Thickness)12”16”24”


Viper25TM (0.0155“ Design Thickness) 12”16”24”Viper20TM (0.0245“ Design Thickness)12”16”24”


Viper25TM (0.0155“ Design Thickness)12”16”24”Viper20TM (0.0245“ Design Thickness)12”16”24”

L/240 13' 11"12' 8"11' 1"

15' 4"13' 11"12’ 2"

L/240

17' 0"f14' 9"f12' 0"f

17' 1"15' 6"13' 7"

L/240 17' 2"16' 0"13' 10"

18' 4"16' 9"14' 9"

L/240 20' 9"18' 9"f15' 4"f

22' 9"20' 8"18' 1"

L/240 25' 11"22' 11"f18' 8"f

26' 4"23' 11"20' 11"

L/360 12' 2"11' 1"9' 8"

13' 4"12' 2"10' 7"

L/360

14' 11"13' 7"11' 10"

14' 11"13' 7"11' 10"

L/360 15' 0"13' 11"12' 1"

16' 0"14' 8"12' 11"

L/360 18' 2"16' 6"14' 5"

19' 11"18' 1"15' 10"

L/360 22' 8"20' 7"18' 0"

23' 0"20' 11"18' 3"

L/120 12' 9"f11' 0"f9' 0"f

14' 2"f12' 3"f10' 0"f

L/120

13' 11"f12’ 0”f9’ 10”f

18’ 2”f15’ 9”f12’ 10”f

L/120 18' 0"f14' 11"f12' 3"f 20' 2"18' 5"15' 5"f

L/120 17' 8"f15' 4"f12' 6"f

22' 9"f19' 8"f16' 1"f

L/120 21' 7"f18' 8"f15' 3"f 27' 10"f24' 1"f19' 8"f

L/240 12' 2"11' 1"9' 8"

13' 4"12' 2"10' 0"f

L/240

13' 11"f12' 0"f9' 10"f

14' 11"13' 7"11' 10"

L/240 15' 0"13' 11"12' 1" 16' 0"14' 8"12' 11"

L/240 17' 8"f15' 4"f12' 6"f

19' 11"18' 1"15' 10"

L/240 21' 7"f18' 8"f15' 3"f 23' 0"20' 11"18' 3"

L/360 10' 8"9' 8"8' 5"

11' 8"10' 7"9' 3"

L/360

13' 0"11' 10"9' 10"f

13' 0"11' 10"10' 4"

L/360 13' 1"12' 2"10' 7" 14' 0"12' 10"11' 3"

L/360 15' 10"14' 5"12' 6"f

17' 5"15' 10"13' 10"

L/360 19' 10"18' 0"15' 3"f

20' 1"18' 3"15' 11"

L/120 11' 0"f9' 6"f7' 10"f

12' 3"f10' 7"f8' 8"f

L/120

12' 0"f10' 5"f8' 6"f

15' 9"f13' 7"f11' 1"f

L/120 15' 7"f12' 11"f10' 7"f

18' 4"16' 3"f13' 4"f

L/120 15' 3"f13' 3"f10' 10"f

19' 8"f17' 1"f13' 11"f

L/120 18' 8"f16' 2"f13' 3"f

24' 1"f20' 10"f17' 0"f

L/240 11’ 1"10' 1"8' 9"f

12' 2"10' 7"f8' 8"f

L/240

12' 0"f10' 5"f8' 6"f

13' 7"12' 4"10' 9"

L/240 13' 8"12' 8"10' 7"f 14' 6"13' 4"11' 9"

L/240 15' 3"f13' 3"f10' 10"f

18' 1"16' 5"13' 11"f

L/240 18' 8"f16' 2"f13' 3"f

20' 11"19' 0"16' 7"

L/360 9' 8"8' 9"7' 8"

10' 7"9' 8"8' 5"

L/360 11' 10"10' 5"f8' 6"f

11' 10"10' 9"9' 5"

L/360 11' 11"11' 1"9' 7" 12' 8"11' 8"10' 3"

L/360 14' 5"13' 1"10' 10"f

15' 10"14' 4"12' 6"

L/360 18' 0"16' 2"f13' 3"f

18' 3"16' 7"14' 6"

L/120 9’ 0”f7' 10"f—

10' 0"f8' 8"f—

L/120

9' 10"f8' 6"f—

12' 10"f11' 1"f9' 1"f

L/120 12' 9"f10' 7"f8' 8"f

15' 3"f13' 4"f10' 11"f

L/120 12' 6"f10' 10"f8' 10"f

16' 1"f13' 11"f11' 4"f

L/120 15' 3"f13' 3"f10' 9"f

19' 8"f17' 0"f13' 11"f

L/240 9' 8"8' 9"f—

10' 0"f8' 8"f—

L/240 9' 10"f8' 6"f—

11' 10"10' 9"9’ 1”f

L/240 11' 11"10' 7"f8' 8"f

12' 8"11' 8"10' 3"

L/240 12' 6"f10' 10"f8' 10"f

15'10"13' 11"f11' 4"f

L/240 15' 3"f13' 3"f10' 9"f

18' 3"16' 7"13' 11"f

L/360 8' 5"7' 8"—

9' 3"8' 5"—

L/360 9' 10"f8' 6"f—

10' 4"9' 5"8' 3"

L/360 10' 5"9' 8"8' 4"

11' 1"10' 2"8' 11"

L/360 12' 6"f10' 10"f8' 10"f

13' 10"12' 6"10' 11"

L/360 15' 3"f13' 3"f10' 9"f

15' 11"14' 6"12' 8"




TECHNICAL PRODUCT GUIDECEMCO1001-A Pittsburg Antioch HwyPittsburg, CA 94565P: 925.473.9340F: 925.473.9341













The following gypsum board manufacturers are listed as suitable with the ViperStud System in our Warnock-Hersey 1hr & 2hr Design Assemblies: • American Gypsum• CertainTeed Gypsum• CGC Inc.• Federal Gypsum Company• GP Gypsum

NYC Department of Buildings; Materials and Equipment Acceptance Report• MEA# 56-08-M



• Lafarge North America• National Gypsum Co.• PABCO Gypsum• Temple-Inland• United States Gypsum

A. 3-5/8” Stud - 1 Layer of 5/8” GWB on each side

B. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, 1 Layer of 5/8” GWB on each side

C. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, RC1 Channel 1 side, 1 Layer of 5/8” GWB on each side

D. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, RC1 Channel 1 side, Double Layers of 5/8” GWB on each side

WARRANTY & LIMITATIONSAll products presented herein are warranted to the buyer to be free from defects in material and workmanship. The foregoing warranty is non-assignable and in lieu of and excludes all other warranties not expressly set forth herein, whether express or implied by operation of law or otherwise, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. All details and specifications presented herein are intended as a general guide for the use of Marino\WARE® framing systems. These products should not be used without evaluation by a qualified engineer or architect to determine their suitability for a specific use.


SCREW RETENTION

ACOUSTIC PERFORMANCE

FOR 3 5/8” STUD (25 ga. equivalent)



TECHNICAL PRODUCT GUIDE

Norbet Trucking is the number one carrier of Expedius products for both Norbet Trucking is the number one carrier of Expedius products for both MarinoWARE and CEMCO, delivering Nationwide.

CEMCO1001-A Pittsburg Antioch HwyPittsburg, CA 94565P: 925.473.9340F: 925.473.9341













The following gypsum board manufacturers are listed as suitable with the ViperStud System in our Warnock-Hersey 1hr & 2hr Design Assemblies: • American Gypsum• CertainTeed Gypsum• CGC Inc.• Federal Gypsum Company• GP Gypsum



• Lafarge North America• National Gypsum Co.• PABCO Gypsum• Temple-Inland• United States Gypsum

A. 3-5/8” Stud - 1 Layer of 5/8” GWB on each side

B. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, 1 Layer of 5/8” GWB on each side

C. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, RC1 Channel 1 side, Double Layers of 5/8” GWB on each side

D. 3-5/8” Stud - 3-5/8” Fiberglass Insulation R-11, RC1 Channel 1 ide, Double Layers of 5/8” GWB on each side

WARRANTY & LIMITATIONSAll products presented herein are warranted to the buyer to be free from defects in material and workmanship. The foregoing warranty is non-assignable and in lieu of and excludes all other warranties not expressly set forth herein, whether express or implied by operation of law or otherwise, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. All details and specifications presented herein are intended as a general guide for the use of Marino\WARE® framing systems. These products should not be used without evaluation by a qualified engineer or architect to determine their suitability for a specific use.


SCREW RETENTION

ACOUSTIC PERFORMANCE

FOR 3 5/8” STUD (25 ga. equivalent)

composite limiting heights a better … greater limiting heights, better screw retention, and easier...

Documents