iOS Version Android Version

Midea CAC After-service Application

iOS Version

Midea CAC News Application

1605-1S1512

Commercial Air Conditioner DivisionMidea GroupAdd.: West Region of Midea Commercial Air Conditioner Department, Industry Avenue,

Beijiao, Shunde, Foshan, Guangdong, P. R. China

Postal code: 528311

Tel: +86-757-26338346 Fax: +86-757-22390205

cac.midea.com global.midea.com

Note: The data in this book may be changed without notice for further improvement

on quality and performance.

Commercial Air Conditioners 2016

R410A 50Hz

Split Commercial A/C

There are three production bases: Shunde, Chongqing and Hefei.

MCAC Shunde: 38 product lines focusing on VRF, Split Products, Heat Pump Water Heaters, and AHU/FCU.

MCAC Chongqing: 14 product lines focusing on Water Cooled Centrifugal/Screw/Scroll Chillers, Air Cooled Screw/Scroll Chillers,

and AHU/FCU.

MCAC Hefei: 11 product lines focusing on VRF, Chillers, and Heat Pump Water Heaters.

Midea CACMidea CAC is a key division of the Midea Group, a leading producer of consumer appliances and provider of heating, ventilation

and air conditioning solutions. Midea CAC has continued with the tradition of innovation upon which it was founded, and

emerged as a global leader in the HVAC industry. A strong drive for advancement has created a groundbreaking R&D

department that has placed Midea CAC at the forefront of a competitive field. Through these independent efforts and joint

cooperation with other global enterprises, Midea has supplied thousands of innovative solutions to customers worldwide.

2015 JV with Carrier in China in chiller field, BOSCH in VRF production and Siix in smart control

2014 Launched the duct indoor unit with belt drive fan globally

2010 Built the 3rd manufacturing base in Hefei

2008 Launched the rooftop package ClimaMaster globally

2007 Won the first Midea centrifugal chiller project overseas

2006 Launched the first VSD centrifugal chiller

2004 Acquired MGRE entered the chiller industry

2001 Partnered with Copeland to develop the digital scroll VRF system

2000 Developed the first inverter VRF With Toshiba

1999 Entered the CAC field

Midea Company Introduction

Midea CAC Introduction

There are three production bases: Shunde, Chongqing and Hefei.

MCAC Shunde: 38 product lines focusing on VRF, Split Products, Heat Pump Water Heaters, and AHU/FCU.

MCAC Chongqing: 14 product lines focusing on Water Cooled Centrifugal/Screw/Scroll Chillers, Air Cooled Screw/Scroll Chillers,

and AHU/FCU.

MCAC Hefei: 11 product lines focusing on VRF, Chillers, and Heat Pump Water Heaters.

Midea CACMidea CAC is a key division of the Midea Group, a leading producer of consumer appliances and provider of heating, ventilation

and air conditioning solutions. Midea CAC has continued with the tradition of innovation upon which it was founded, and

emerged as a global leader in the HVAC industry. A strong drive for advancement has created a groundbreaking R&D

department that has placed Midea CAC at the forefront of a competitive field. Through these independent efforts and joint

cooperation with other global enterprises, Midea has supplied thousands of innovative solutions to customers worldwide.

2015 JV with Carrier in China in chiller field, BOSCH in VRF production and Siix in smart control

2014 Launched the duct indoor unit with belt drive fan globally

2010 Built the 3rd manufacturing base in Hefei

2008 Launched the rooftop package ClimaMaster globally

2007 Won the first Midea centrifugal chiller project overseas

2006 Launched the first VSD centrifugal chiller

2004 Acquired MGRE entered the chiller industry

2001 Partnered with Copeland to develop the digital scroll VRF system

2000 Developed the first inverter VRF With Toshiba

1999 Entered the CAC field

Midea Company Introduction

Midea CAC Introduction

03 04

Introduction

Midea split type air conditioners are designed and manufactured to meet the requirements of the home, office, hotel and

others public occasion use. The units are completely assembled, internally wired, charged outdoor unit with refrigerant at

the factory.

Notes: 1. Product’s cooling capacity as per specification.

Contents

09 DX AHU Series

18 Conventional split A/C series

37 Controllers

06 General Features

04 Introduction

Convenient for unit selection

Outstanding reliability

Easy to installation

Flexible choise of accessories

Mechanical specification

DX AHU (Air Handler Unit)

100% Fresh Air, DX AHU

Duct Indoor Unit

Floor-standing Indoor Unit

Intr

oduc

tion

220~240V,1Ph~, 50Hz

380~415V,3Ph~, 50Hz

Outdoor units

Indoor units(DX AHU)

Outdoor units

Indoor units(DX AHU)

R410A

T3

Power supply7.0 kW 10.4 kW 14.0 kW 17.0 kW

Nominal cooling capactityApplication

380~415V,3Ph~, 50Hz

Outdoor units

Indoor units(100% fresh air,

DX AHU)

R410A

Power supply53.0 kW 64.0 kW 98.0 kW

Nominal cooling capactityApplication

DX AHU (Air Handler Unit) Series

03 04

Introduction

Midea split type air conditioners are designed and manufactured to meet the requirements of the home, office, hotel and

others public occasion use. The units are completely assembled, internally wired, charged outdoor unit with refrigerant at

the factory.

Notes: 1. Product’s cooling capacity as per specification.

Contents

09 DX AHU Series

18 Conventional split A/C series

37 Controllers

06 General Features

04 Introduction

Convenient for unit selection

Outstanding reliability

Easy to installation

Flexible choise of accessories

Mechanical specification

DX AHU (Air Handler Unit)

100% Fresh Air, DX AHU

Duct Indoor Unit

Floor-standing Indoor UnitIn

trod

uctio

n

220~240V,1Ph~, 50Hz

380~415V,3Ph~, 50Hz

Outdoor units

Indoor units(DX AHU)

Outdoor units

Indoor units(DX AHU)

R410A

T3

Power supply7.0 kW 10.4 kW 14.0 kW 17.0 kW

Nominal cooling capactityApplication

380~415V,3Ph~, 50Hz

Outdoor units

Indoor units(100% fresh air,

DX AHU)

R410A

Power supply53.0 kW 64.0 kW 98.0 kW

Nominal cooling capactityApplication

DX AHU (Air Handler Unit) Series

05 06

General Features

Convenient for unit selection

Wide cooling capacity range. The duct type split AC is from 76,000Btu/h to 192,000Btu/h.

Wide cooling capacity range

Pre-painted exterior cabinet panels pass 1000 hours Salt Spray Test for durability.

Weather-resistant construction with capped steams and sloped top panels.

G90 galvanized heavy gauge plate conforming to ASTM-A-653.

Durable construction

Outstanding reliability

Max. equivalent piping length is 50m. The outdoor unit can be installed at any ventilation locations. (Unavailable for

AHU type)

Long piping length

Max

. equ

ival

ent

pipi

ng le

ngth

: 50m

Max

. hei

ght d

rop

Max. Equivalent piping length

Outdoor unit down

Outdoor unit upMax. height drop between indoor and outdoor unit

Permitted value

50 m

25 m

30 m

Gen

eral

Fea

ture

s

Gen

eral

Fea

ture

s

Notes: 1. Product’s cooling capacity as per specification.

380~415V,3Ph~, 50Hz

380~415V,3Ph~, 50Hz

Outdoor units

Outdoor units

Indoor units(Duct)

Indoor units(Floor-standing)

Indoor units(Floor-standing)

Indoor units(Duct)

R410A

T1

R410A

Tropical (T3)

Power supply76 kBtu/h 96 kBtu/h 120 kBtu/h 192 kBtu/h150 kBtu/h

Nominal cooling capactityApplication

×2

Conventional Split A/C Series

05 06

General Features

Convenient for unit selection

Wide cooling capacity range. The duct type split AC is from 76,000Btu/h to 192,000Btu/h.

Wide cooling capacity range

Pre-painted exterior cabinet panels pass 1000 hours Salt Spray Test for durability.

Weather-resistant construction with capped steams and sloped top panels.

G90 galvanized heavy gauge plate conforming to ASTM-A-653.

Durable construction

Outstanding reliability

Max. equivalent piping length is 50m. The outdoor unit can be installed at any ventilation locations. (Unavailable for

AHU type)

Long piping lengthM

ax. e

quiv

alen

t

pipi

ng le

ngth

: 50m

Max

. hei

ght d

rop

Max. Equivalent piping length

Outdoor unit down

Outdoor unit upMax. height drop between indoor and outdoor unit

Permitted value

50 m

25 m

30 m

Gen

eral

Fea

ture

s

Gen

eral

Fea

ture

s

Notes: 1. Product’s cooling capacity as per specification.

380~415V,3Ph~, 50Hz

380~415V,3Ph~, 50Hz

Outdoor units

Outdoor units

Indoor units(Duct)

Indoor units(Floor-standing)

Indoor units(Floor-standing)

Indoor units(Duct)

R410A

T1

R410A

Tropical (T3)

Power supply76 kBtu/h 96 kBtu/h 120 kBtu/h 192 kBtu/h150 kBtu/h

Nominal cooling capactityApplication

×2

Conventional Split A/C Series

07 08

Gen

eral

Fea

ture

s

Gen

eral

Fea

ture

s

Flexible choise of accessoriesControllers

Wireless remote controller is available for conventional split A/C series.

Wired controller can be directly connected with duct & floor-standing indoor unts.

Multi-accessories

√

√

√

√

√

Filter

Wired controller

Thermal EXV valve

Sight glass

Drier filter

DescriptionStandard Optional

100%, Fresh air, air handler unit

EHK (Electric Heater Kits)

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

Filter

Three-phase protector

Wireless controller

Wired controller

Centralized controller

Outlet drainage

DescriptionStandard OptionalStandard Optional

T1, Duct Tropical (T3), Duct T1 & Tropical (T3), Floor-standing

Standard Optional

Centralized control function can be achieved through the centralized controller as optional. MD-NIM01 should be

connected between the indoor units and centralized controller. (Only available for conventional split A/C series)

CCM30

Max.64

MD-NIM01 MD-NIM01 MD-NIM01 MD-NIM01

KJR-29BR51/CE

Easy for installation

Famous brand compressor: Hitachi, Danfoss, etc.

More reliable.

No complex internal suction and discharge valves for

quieter operation and higher reliability.

Compact, light-weight design, and fewer moving parts

design.

Reliable scroll compressor

The large split air conditioners with special anti-corrosion treatment are suitable for seaside areas or the areas exposed

to acidic substances.

Customized anti-corrosion treatment

Multi-measurement to ensure units operate normally

and reliably:

System current protection, High/low pressure switch

protection, Temperature sensor on/off protection, etc.

Three-phase protector can be customized.

Multi-protection design

Temperature sensorHP/LP switch

Special anti-corrosion treatment of heat exchanger

provides 5 to 6 times greater resistance against acid

rain and salt corrosion.

All PCB parts in the unit are coated with double-side

moisture proof paint. The outer side of electric box

metal cover is spray-painted.

All screws are anti-rust.

Casings of the unit and motors are anti-rust.

Units are completely assembled, internally wired, charged outdoor unit with refrigerant at the factory.

The site work only needs to connect refrigerant pipes and communication wires between outdoor unit and indoor unit.

Liquid pipeGas pipeConnecting cable

07 08

Gen

eral

Fea

ture

s

Gen

eral

Fea

ture

s

Flexible choise of accessoriesControllers

Wireless remote controller is available for conventional split A/C series.

Wired controller can be directly connected with duct & floor-standing indoor unts.

Multi-accessories

√

√

√

√

√

Filter

Wired controller

Thermal EXV valve

Sight glass

Drier filter

DescriptionStandard Optional

100%, Fresh air, air handler unit

EHK (Electric Heater Kits)

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

√

Filter

Three-phase protector

Wireless controller

Wired controller

Centralized controller

Outlet drainage

DescriptionStandard OptionalStandard Optional

T1, Duct Tropical (T3), Duct T1 & Tropical (T3), Floor-standing

Standard Optional

Centralized control function can be achieved through the centralized controller as optional. MD-NIM01 should be

connected between the indoor units and centralized controller. (Only available for conventional split A/C series)

CCM30

Max.64

MD-NIM01 MD-NIM01 MD-NIM01 MD-NIM01

KJR-29BR51/CE

Easy for installation

Famous brand compressor: Hitachi, Danfoss, etc.

More reliable.

No complex internal suction and discharge valves for

quieter operation and higher reliability.

Compact, light-weight design, and fewer moving parts

design.

Reliable scroll compressor

The large split air conditioners with special anti-corrosion treatment are suitable for seaside areas or the areas exposed

to acidic substances.

Customized anti-corrosion treatment

Multi-measurement to ensure units operate normally

and reliably:

System current protection, High/low pressure switch

protection, Temperature sensor on/off protection, etc.

Three-phase protector can be customized.

Multi-protection design

Temperature sensorHP/LP switch

Special anti-corrosion treatment of heat exchanger

provides 5 to 6 times greater resistance against acid

rain and salt corrosion.

All PCB parts in the unit are coated with double-side

moisture proof paint. The outer side of electric box

metal cover is spray-painted.

All screws are anti-rust.

Casings of the unit and motors are anti-rust.

Units are completely assembled, internally wired, charged outdoor unit with refrigerant at the factory.

The site work only needs to connect refrigerant pipes and communication wires between outdoor unit and indoor unit.

Liquid pipeGas pipeConnecting cable

09 10

Mechanical speci�cation

CasingUnit casing is constructed of heavy gauge galvanized steel plate. Both side of the casing is waterproof and anti-corrosion coated. Unit panel structure is allowed to maintain on one side of the unit. Service panels are removed easily and reinstalled by removing bolts. The inside of indoor unit panels will be covered with 10mm insulation to prevent heat and noise coming out. Units are available for forklift transportation.

CompressorAll units are equipped with direct-drive, hermetic, scroll type compressor, and it’s built-in motor is cooled with suction gas. The voltage utilization range is ±10% of unit nameplate voltage. The compressors, incorporating a built-in muffler, are mounted on springs within a steel housing to reduce noise. An electric heater around the compressor crankcase to ensure stability starting.

Heat-exchange coilsInner-threaded copper tubes mechanically bonded to a configured hydrophilic aluminum fin is standard for the outdoor heat-exchanger. The one which is equipped in indoor unit is standard configurated with copper tubes. All the coils are leak tested at 4.4MPa at the factory to ensure the pressure integrity. All the indoor units are standard configurated a condensate drain pan.

Outdoor fanThe outdoor fan is multi-blade vane-axial type, made of aluminum alloy for quiet operation and durability. It is directly driven by waterproof motor to ensure reliable continuous operations. Statically and dynamically balanced drive motor design with maintenance-free bearing for outdoor installation.

Indoor fanThe indoor fan is forward-curved blade centrifugal fan. Impeller and casing are made of galvanized steel sheet. The high quality ball bearings are air-sealed with preset lubricating oil. They are coated after assembly in order to provide corrosion resistance. The fan is directly driven by a waterproof motor. The fan and motor assembly is tested and dynamic balance is implemented in the factory.

Three-phase protectorThe unit with three-phase power supply is equipped with phase sequence protector as optional. These devices protect motors and compressors against problems caused by phase lack, phase imbalance and phase reversal indication. When the voltage is above or below the normal range, it works and prevents unit from suffering voltage fluctuations.

ControlsUnits are completely factory-wired with necessary controls and wiring terminals for power wiring. Microprocessor controls the cooling, heating and ventilating modes in response to signals from sensors measuring indoor and outdoor temperatures. It will keep accurate temperature control, minimum drift from the set point and provide better building comfort.

DX AHU Series

Washable �lter as optional

Flange of air flow is standard.

Dual drainage spouts for versatile installation.

Multiple airflow design: Vertical up-flow, Vertical down-flow, Horizontal left-flow and horizontal right-flow.

Flexible installation

T1 A

pplic

atio

ns

T1 A

pplic

atio

ns

Wired controller

KJR-23B (Optional)DX AHU Outdoor unit

DX AHU (Air Handler Unit)

Refrigerantpipes

Drainage spouts

Horizontal installation

Air intake Air delivery

09 10

Mechanical speci�cation

CasingUnit casing is constructed of heavy gauge galvanized steel plate. Both side of the casing is waterproof and anti-corrosion coated. Unit panel structure is allowed to maintain on one side of the unit. Service panels are removed easily and reinstalled by removing bolts. The inside of indoor unit panels will be covered with 10mm insulation to prevent heat and noise coming out. Units are available for forklift transportation.

CompressorAll units are equipped with direct-drive, hermetic, scroll type compressor, and it’s built-in motor is cooled with suction gas. The voltage utilization range is ±10% of unit nameplate voltage. The compressors, incorporating a built-in muffler, are mounted on springs within a steel housing to reduce noise. An electric heater around the compressor crankcase to ensure stability starting.

Heat-exchange coilsInner-threaded copper tubes mechanically bonded to a configured hydrophilic aluminum fin is standard for the outdoor heat-exchanger. The one which is equipped in indoor unit is standard configurated with copper tubes. All the coils are leak tested at 4.4MPa at the factory to ensure the pressure integrity. All the indoor units are standard configurated a condensate drain pan.

Outdoor fanThe outdoor fan is multi-blade vane-axial type, made of aluminum alloy for quiet operation and durability. It is directly driven by waterproof motor to ensure reliable continuous operations. Statically and dynamically balanced drive motor design with maintenance-free bearing for outdoor installation.

Indoor fanThe indoor fan is forward-curved blade centrifugal fan. Impeller and casing are made of galvanized steel sheet. The high quality ball bearings are air-sealed with preset lubricating oil. They are coated after assembly in order to provide corrosion resistance. The fan is directly driven by a waterproof motor. The fan and motor assembly is tested and dynamic balance is implemented in the factory.

Three-phase protectorThe unit with three-phase power supply is equipped with phase sequence protector as optional. These devices protect motors and compressors against problems caused by phase lack, phase imbalance and phase reversal indication. When the voltage is above or below the normal range, it works and prevents unit from suffering voltage fluctuations.

ControlsUnits are completely factory-wired with necessary controls and wiring terminals for power wiring. Microprocessor controls the cooling, heating and ventilating modes in response to signals from sensors measuring indoor and outdoor temperatures. It will keep accurate temperature control, minimum drift from the set point and provide better building comfort.

DX AHU Series

Washable �lter as optional

Flange of air flow is standard.

Dual drainage spouts for versatile installation.

Multiple airflow design: Vertical up-flow, Vertical down-flow, Horizontal left-flow and horizontal right-flow.

Flexible installation

T1 A

pplic

atio

ns

T1 A

pplic

atio

ns

Wired controller

KJR-23B (Optional)DX AHU Outdoor unit

DX AHU (Air Handler Unit)

Refrigerantpipes

Drainage spouts

Horizontal installation

Air intake Air delivery

11 12

Tropical (T3) application, DX AHU - Indoor unit

Speci�cations

Tropical (T3) application, DX AHU - Outdoor unit

T1 A

pplic

atio

ns

Trop

ical

(T3)

App

licat

ion

MVA-24CWN1-13

(Unit: mm)

1,050 460 520 406

1,180 500 550 456

1,385 560 610 496

1,385 560 610 496

MVA-36CWN1-13

MVA-48CWN1-13

MVA-60CWN1-13

H W D A

MOVTA-24CN1-13C

(Unit: mm)

600 600 633

710 710 759

710 710 759

710 710 843

MOVTA-36CN1-13C

MOVTA-36CN1-R13C

MOVTA-48CN1-R13C

740 740 843MOVTA-60CN1-R13C

HWL

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model

Air flow (Hi)

Standard external static pressure (Hi)

Max. external static pressure (Hi)

Coil

Fan type / Drive type

Dimension

Supply duct dimension (W×D)

Net (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)

Capacity (T1)

Btu/h

kW

CFM

Noise level (Hi)

mm

mm

mm

kg

SEER (T1)

Controller

dB(A)

220~240V, 1Ph~, 50Hz

24,000 / 20,400

7.0

13

920 1,470

45

150

Copper tube and aluminum fin

KJR-23B (Optional)

50 / 56

Centrifugal / Direct

49

MOVTA-24CN1-13C

460×1,050×520

534×1,104×580

MVA-24CWN1-13

220~240V, 1Ph~, 50Hz

36,000 / 30,400

10.4

13

60

150

KJR-23B (Optional)

500×1,180×550

406×262 457×262

64 / 70

573×1,234×610

Centrifugal / Direct

55

MOVTA-36CN1-(R)13C

MVA-36CWN1-13

Pa

Pa

220~240V, 1Ph~, 50Hz

48,000 / 40,500

14.0

13

1,900 2,010

70

150

KJR-23B (Optional)

78 / 85

Centrifugal / Direct

57

MOVTA-48CN1-R13C

560×1,385×610

634×1,438×670

MVA-48CWN1-13

220~240V, 1Ph~, 50Hz

58,000 / 49,000

17.0

13

75

150

KJR-23B (Optional)

560×1,385×610

495×262 495×262

78 / 85

634×1,438×670

Centrifugal / Direct

59

MOVTA-60CN1-R13C

MVA-60CWN1-13

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. The standard external static pressure and air flow is based on cooling performance without filter in place.

4. Specifications are subject to change without prior notice for product improvement.

Coil

Weight

Dimension

Noise level

Outdoor unit power supply

Outdoor unit model

Compressor Type

Quantity

Refrigerant

Air flow

Type

Charged

Max. power input (Outdoor unit)

Fan type / Drive type

Body (W×H×D)

Gross

Packing (W×H×D)

mm

mm

°C

mm

kg

W

kg

CFM

Refrigerant piping size

Ambient temperature

dB(A)

220~240V, 1Ph~, 50Hz

2,650

62

Scroll

1

R410A

Axial / Direct

Copper tube and aluminum fin

Φ9.52 / Φ19

62

628×667×628

600×633×600

17~52 17~52

MOVTA-24CN1-13C

380~415V, 3Ph~, 50Hz

3,950

64

Scroll

1

R410A

2.52 3.57

1,766 3,000

Axial / Direct

Φ9.52 / Φ19

90

Net kg 59 86

738×793×738

710×759×710

17~52

4,050

64

Scroll

1

R410A

3.62

3,000

Axial / Direct

Φ9.52 / Φ19

85

81

738×793×738

710×759×710

17~52

5,950

68

Scroll

1

R410A

3.92

3,396

Axial / Direct

Φ9.52 / Φ22

93

89

738×877×738

710×843×710

17~52

6,800

68

Scroll

1

R410A

4.32

4,031

Axial / Direct

Φ9.52 / Φ22

102

98

768×877×768

740×843×740

MOVTA-36CN1-13C MOVTA-36CN1-R13C MOVTA-48CN1-R13C MOVTA-60CN1-R13C

Dimensions

T3 application, DX AHU - Outdoor unit

T3 application, DX AHU - Indoor unit

Flanges are providedfor �eld installation

Breaker switch(For electric heater only)

H

D

W262mm

A

High voltage connection

Vapor line connection copper

Liquid line connection copper

Auxiliary drain connection

Auxiliary drain connection

Primary drain connection

Air inletsLouvered panels

H

W

Service access

L

11 12

Tropical (T3) application, DX AHU - Indoor unit

Speci�cations

Tropical (T3) application, DX AHU - Outdoor unit

T1 A

pplic

atio

ns

Trop

ical

(T3)

App

licat

ion

MVA-24CWN1-13

(Unit: mm)

1,050 460 520 406

1,180 500 550 456

1,385 560 610 496

1,385 560 610 496

MVA-36CWN1-13

MVA-48CWN1-13

MVA-60CWN1-13

H W D A

MOVTA-24CN1-13C

(Unit: mm)

600 600 633

710 710 759

710 710 759

710 710 843

MOVTA-36CN1-13C

MOVTA-36CN1-R13C

MOVTA-48CN1-R13C

740 740 843MOVTA-60CN1-R13C

HWL

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model

Air flow (Hi)

Standard external static pressure (Hi)

Max. external static pressure (Hi)

Coil

Fan type / Drive type

Dimension

Supply duct dimension (W×D)

Net (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)

Capacity (T1)

Btu/h

kW

CFM

Noise level (Hi)

mm

mm

mm

kg

SEER (T1)

Controller

dB(A)

220~240V, 1Ph~, 50Hz

24,000 / 20,400

7.0

13

920 1,470

45

150

Copper tube and aluminum fin

KJR-23B (Optional)

50 / 56

Centrifugal / Direct

49

MOVTA-24CN1-13C

460×1,050×520

534×1,104×580

MVA-24CWN1-13

220~240V, 1Ph~, 50Hz

36,000 / 30,400

10.4

13

60

150

KJR-23B (Optional)

500×1,180×550

406×262 457×262

64 / 70

573×1,234×610

Centrifugal / Direct

55

MOVTA-36CN1-(R)13C

MVA-36CWN1-13

Pa

Pa

220~240V, 1Ph~, 50Hz

48,000 / 40,500

14.0

13

1,900 2,010

70

150

KJR-23B (Optional)

78 / 85

Centrifugal / Direct

57

MOVTA-48CN1-R13C

560×1,385×610

634×1,438×670

MVA-48CWN1-13

220~240V, 1Ph~, 50Hz

58,000 / 49,000

17.0

13

75

150

KJR-23B (Optional)

560×1,385×610

495×262 495×262

78 / 85

634×1,438×670

Centrifugal / Direct

59

MOVTA-60CN1-R13C

MVA-60CWN1-13

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. The standard external static pressure and air flow is based on cooling performance without filter in place.

4. Specifications are subject to change without prior notice for product improvement.

Coil

Weight

Dimension

Noise level

Outdoor unit power supply

Outdoor unit model

Compressor Type

Quantity

Refrigerant

Air flow

Type

Charged

Max. power input (Outdoor unit)

Fan type / Drive type

Body (W×H×D)

Gross

Packing (W×H×D)

mm

mm

°C

mm

kg

W

kg

CFM

Refrigerant piping size

Ambient temperature

dB(A)

220~240V, 1Ph~, 50Hz

2,650

62

Scroll

1

R410A

Axial / Direct

Copper tube and aluminum fin

Φ9.52 / Φ19

62

628×667×628

600×633×600

17~52 17~52

MOVTA-24CN1-13C

380~415V, 3Ph~, 50Hz

3,950

64

Scroll

1

R410A

2.52 3.57

1,766 3,000

Axial / Direct

Φ9.52 / Φ19

90

Net kg 59 86

738×793×738

710×759×710

17~52

4,050

64

Scroll

1

R410A

3.62

3,000

Axial / Direct

Φ9.52 / Φ19

85

81

738×793×738

710×759×710

17~52

5,950

68

Scroll

1

R410A

3.92

3,396

Axial / Direct

Φ9.52 / Φ22

93

89

738×877×738

710×843×710

17~52

6,800

68

Scroll

1

R410A

4.32

4,031

Axial / Direct

Φ9.52 / Φ22

102

98

768×877×768

740×843×740

MOVTA-36CN1-13C MOVTA-36CN1-R13C MOVTA-48CN1-R13C MOVTA-60CN1-R13C

Dimensions

T3 application, DX AHU - Outdoor unit

T3 application, DX AHU - Indoor unit

Flanges are providedfor �eld installation

Breaker switch(For electric heater only)

H

D

W262mm

A

High voltage connection

Vapor line connection copper

Liquid line connection copper

Auxiliary drain connection

Auxiliary drain connection

Primary drain connection

Air inletsLouvered panels

H

W

Service access

L

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C DB, 20°C WB, indoor temperature 35°C DB / 20°C WB;

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C DB, 26°C WB, indoor temperature 46°C DB / 26°C WB;

3. Specifications are subject to change without prior notice for product improvement.

Max. current (Whole units)

Coil

Dimension

380V, 3Ph~, 60Hz

45.55

84.3

Scroll / 2

9.0kg+9.0kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

RefrigerantType

Charged

Max. power input (Whole units)

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size (×Quantity)

Ambient temperature

380~415V, 3Ph~, 50Hz

28.0

50.7

Scroll / 2

5.5kg+5.5kg

Axial / Direct

Φ12.7 / Φ25 (×2)

403 / 415

1,844×1,272×924

1,825×1,245×899

15~52 15~52 15~52

MKXT53D/RN1

380~415V, 3Ph~, 50Hz

33.0

60.0

Scroll / 2

8.5kg+8.5kg

R410AR410A R410A

Axial / Direct

Copper tube and aluminum fin

Φ12.7 / Φ25 (×2)

508 / 523

2,168×1,275×1,105

2,158×1,260×1,082

MKXT70D/RN1

Φ12.7 / Φ25 (×2)

570 / 582

2,168×1,686×1,105

2,158×1,670×1,082

MKXT105D/RN1

Sight glass (×Quantity)

DML 305 FS (×2)

TGEL15 067N3159 (×2)

SGP 12sN (×2)

300×230×260

Drier filter (×Quantity)

Installation kits (Optional)

Packing dimension (W×H×D)

Net / Gross weight

Thermal EXP valve (×Quantity)

DML 305 FS (×2)

TGEL9 067N3176 (×2)

SGP 12sN (×2)

300×230×260

MKXT53D/RN1(C)

DML 305 FS (×2)

TGEL13 067N3177 (×2)

SGP 12sN (×2)

300×230×260

4.9/5.44.9/5.4kg

mm

4.9/5.4

MKXT70D/RN1(C) MKXT105D/RN1(C)

13 14

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Tropical (T3) 100% fresh air & DX AHU

Built-in �lters as standard

Variable speed pulley designChange the speed of a rotating shaft member, so it will increase or decrease the revolutions per minute of that particular

shaft to adjust air flow as required.

Double skin panel structureDouble skin panel is filled with injected polyurethane foam insulation. The outer skin is anti-corrosion color-coated steel

sheet with a layer of film. The inner skin is galvaized steel sheet.

25mm panel thickness as standard, 35mm and 50mm are optional.

100% fresh air, air handle unit Outdoor unit Wired controller

KJR-10C/MC-E (Standard)

Fresh air intake Fresh air delivery

Built-in two filters, standard for grade G2 and G3.

Other grade filter can be customized.

The section of bag filter can be customized.

Tropical (T3) application, 100% fresh air, DX AHU - Indoor unit

Tropical (T3) application, 100% fresh air, DX AHU - Outdoor unit

Tropical (T3) application, 100% fresh air, DX AHU - Installation kits (Optional)

Speci�cations100% Fresh Air, DX AHU

Cooling

Indoor unit power supply

Indoor air flow range

External static pressure range

Coil

Fan type / Drive type

Dimension

Drainage pipe size (OD)

Net (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1)

Capacity (T3)

Input (T3)

EER (T3)

kW

kW

kW

Indoor air flow

mm

mm

mm

kg

Wired controller

380~415V, 3Ph~, 50Hz

53.00

49.82

23.70

2.24 2.21

3,900~5,100

50~220

Copper tube and aluminum fin

KJR-10C/MC-E

300 / 500

Centrifugal / Belt

5,000 (@100Pa)

2,460×1,030×1,080

2,560×1,260×1,280

380~415V, 3Ph~, 50Hz

60.16

64.00

29.00

5,300~6,800

50~150

KJR-10C/MC-E

2,560×1,030×1,380

Φ48

380 / 600

2,740×1,280×1,650

Centrifugal / Belt

6,000 (@100Pa)

Pa

380~415V, 3Ph~, 50Hz

92.12

98.00

37.00

2.65

8,500~10,700

0~150

KJR-10C/MC-E

500 / 740

Centrifugal / Belt

9,000 (@100Pa)

2,560×1,030×1,980

2,700×1,100×2,000

58,000

Φ48

Indoor unit model

Outdoor unit model MKXT53D/RN1

MKZX0909AWY/RN1

MKXT70D/RN1

MKZX0912AWY/RN1

MKXT105D/RN1

MKZX0918AWY/RN1

MKXT53D/RN1(C) MKXT70D/RN1(C) MKXT105D/RN1(C)Installation kits (Optional)

Φ48

m3/h

m3/h

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C DB, 20°C WB, indoor temperature 35°C DB / 20°C WB;

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C DB, 26°C WB, indoor temperature 46°C DB / 26°C WB;

3. Specifications are subject to change without prior notice for product improvement.

Max. current (Whole units)

Coil

Dimension

380V, 3Ph~, 60Hz

45.55

84.3

Scroll / 2

9.0kg+9.0kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

RefrigerantType

Charged

Max. power input (Whole units)

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size (×Quantity)

Ambient temperature

380~415V, 3Ph~, 50Hz

28.0

50.7

Scroll / 2

5.5kg+5.5kg

Axial / Direct

Φ12.7 / Φ25 (×2)

403 / 415

1,844×1,272×924

1,825×1,245×899

15~52 15~52 15~52

MKXT53D/RN1

380~415V, 3Ph~, 50Hz

33.0

60.0

Scroll / 2

8.5kg+8.5kg

R410AR410A R410A

Axial / Direct

Copper tube and aluminum fin

Φ12.7 / Φ25 (×2)

508 / 523

2,168×1,275×1,105

2,158×1,260×1,082

MKXT70D/RN1

Φ12.7 / Φ25 (×2)

570 / 582

2,168×1,686×1,105

2,158×1,670×1,082

MKXT105D/RN1

Sight glass (×Quantity)

DML 305 FS (×2)

TGEL15 067N3159 (×2)

SGP 12sN (×2)

300×230×260

Drier filter (×Quantity)

Installation kits (Optional)

Packing dimension (W×H×D)

Net / Gross weight

Thermal EXP valve (×Quantity)

DML 305 FS (×2)

TGEL9 067N3176 (×2)

SGP 12sN (×2)

300×230×260

MKXT53D/RN1(C)

DML 305 FS (×2)

TGEL13 067N3177 (×2)

SGP 12sN (×2)

300×230×260

4.9/5.44.9/5.4kg

mm

4.9/5.4

MKXT70D/RN1(C) MKXT105D/RN1(C)

13 14

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Tropical (T3) 100% fresh air & DX AHU

Built-in �lters as standard

Variable speed pulley designChange the speed of a rotating shaft member, so it will increase or decrease the revolutions per minute of that particular

shaft to adjust air flow as required.

Double skin panel structureDouble skin panel is filled with injected polyurethane foam insulation. The outer skin is anti-corrosion color-coated steel

sheet with a layer of film. The inner skin is galvaized steel sheet.

25mm panel thickness as standard, 35mm and 50mm are optional.

100% fresh air, air handle unit Outdoor unit Wired controller

KJR-10C/MC-E (Standard)

Fresh air intake Fresh air delivery

Built-in two filters, standard for grade G2 and G3.

Other grade filter can be customized.

The section of bag filter can be customized.

Tropical (T3) application, 100% fresh air, DX AHU - Indoor unit

Tropical (T3) application, 100% fresh air, DX AHU - Outdoor unit

Tropical (T3) application, 100% fresh air, DX AHU - Installation kits (Optional)

Speci�cations100% Fresh Air, DX AHU

Cooling

Indoor unit power supply

Indoor air flow range

External static pressure range

Coil

Fan type / Drive type

Dimension

Drainage pipe size (OD)

Net (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1)

Capacity (T3)

Input (T3)

EER (T3)

kW

kW

kW

Indoor air flow

mm

mm

mm

kg

Wired controller

380~415V, 3Ph~, 50Hz

53.00

49.82

23.70

2.24 2.21

3,900~5,100

50~220

Copper tube and aluminum fin

KJR-10C/MC-E

300 / 500

Centrifugal / Belt

5,000 (@100Pa)

2,460×1,030×1,080

2,560×1,260×1,280

380~415V, 3Ph~, 50Hz

60.16

64.00

29.00

5,300~6,800

50~150

KJR-10C/MC-E

2,560×1,030×1,380

Φ48

380 / 600

2,740×1,280×1,650

Centrifugal / Belt

6,000 (@100Pa)

Pa

380~415V, 3Ph~, 50Hz

92.12

98.00

37.00

2.65

8,500~10,700

0~150

KJR-10C/MC-E

500 / 740

Centrifugal / Belt

9,000 (@100Pa)

2,560×1,030×1,980

2,700×1,100×2,000

58,000

Φ48

Indoor unit model

Outdoor unit model MKXT53D/RN1

MKZX0909AWY/RN1

MKXT70D/RN1

MKZX0912AWY/RN1

MKXT105D/RN1

MKZX0918AWY/RN1

MKXT53D/RN1(C) MKXT70D/RN1(C) MKXT105D/RN1(C)Installation kits (Optional)

Φ48

m3/h

m3/h

15 16

Dimensions

T3 application, 100% fresh air, AHUOutdoor unit: MKXT53D/RN1(Units: mm)

T3 application, 100% fresh air, AHUIndoor unit: MKZX0909AWY/RN1(Units: mm)

Air intake side without part A Air intake side with part A

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

T3 application, 100% fresh air, AHUOutdoor unit: MKXT70D/RN1(Units: mm)

T3 application, 100% fresh air, AHUIndoor unit: MKZX0912AWY/RN1(Units: mm)

406.

5

2,200

3,060

2,460159

84

950

1,03

0

406.

5

826

146.

5

141.

5 53

530(W)*530(H)

431

361

431

361

9501,080

580529

580

530

1,245899

1,825

54.5

406.

5

2,300

3,160

170

84.5

1,03

0

950

80

406.

5

2,560

868

147.

5 142.

5

830(W)*530(H)

474

40447

4

404

1,250

1,380

880

830

580

530

2,158 1,082

1,260

Part A

Air intake side without part A Air intake side with part A

Part A

15 16

Dimensions

T3 application, 100% fresh air, AHUOutdoor unit: MKXT53D/RN1(Units: mm)

T3 application, 100% fresh air, AHUIndoor unit: MKZX0909AWY/RN1(Units: mm)

Air intake side without part A Air intake side with part A

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

T3 application, 100% fresh air, AHUOutdoor unit: MKXT70D/RN1(Units: mm)

T3 application, 100% fresh air, AHUIndoor unit: MKZX0912AWY/RN1(Units: mm)

406.

5

2,200

3,060

2,460159

84

950

1,03

0

406.

5

826

146.

5

141.

5 53

530(W)*530(H)

431

361

431

361

9501,080

580529

580

530

1,245899

1,825

54.5

406.

5

2,300

3,160

170

84.5

1,03

0

950

80

406.

5

2,560

868

147.

5 142.

5

830(W)*530(H)

474

40447

4

404

1,250

1,380

880

830

580

530

2,158 1,082

1,260

Part A

Air intake side without part A Air intake side with part A

Part A

17 18

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Conventional split A/C series

Duct Indoor Unit

Anti-ColdAir Function

WiredController

Auto RestartFunction

IndependentDehumidi�cation

Auto Defrosting

Timer

PTC Heater

Convenient installation

Free air duct design

Compact design. Concealed installation without floor space requirement.

Hidden in the ceiling, unit installation is not hindered by the location of lighting

fixtures or room structure.

Air inlet & outlet flange are standard for easy duct connection.

Easy maintenance through the inspection port.

Multi diffusers from one indoor unit, air-conditioned multi rooms at the same time.

Three speeds of air supply can be chosen via controller.

The indoor unit is suitable for various applications where there are many rooms or halls, such as restaurant, concert halls and

hotels.

Flexible duct design for different room styles.

T3 application, 100% fresh air, AHUIndoor unit: MKZX0918AWY/RN1(Units: mm)

3,160

2,300

84

159

2,560

163

154 64

841

1,03

0

950

406

406

1630(W)*830(H)

523453

523

453

1,680

1,630

880

830

1,9801,850

2,158 1,082

1,67

0

T3 application, 100% fresh air, AHUOutdoor unit: MKXT105D/RN1(Units: mm)

Air intake side without part A Air intake side with part A

Part A

17 18

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Conventional split A/C series

Duct Indoor Unit

Anti-ColdAir Function

WiredController

Auto RestartFunction

IndependentDehumidi�cation

Auto Defrosting

Timer

PTC Heater

Convenient installation

Free air duct design

Compact design. Concealed installation without floor space requirement.

Hidden in the ceiling, unit installation is not hindered by the location of lighting

fixtures or room structure.

Air inlet & outlet flange are standard for easy duct connection.

Easy maintenance through the inspection port.

Multi diffusers from one indoor unit, air-conditioned multi rooms at the same time.

Three speeds of air supply can be chosen via controller.

The indoor unit is suitable for various applications where there are many rooms or halls, such as restaurant, concert halls and

hotels.

Flexible duct design for different room styles.

T3 application, 100% fresh air, AHUIndoor unit: MKZX0918AWY/RN1(Units: mm)

3,160

2,300

84

159

2,560

163

154 64

841

1,03

0

950

406

406

1630(W)*830(H)

523453

523

453

1,680

1,630

880

830

1,9801,850

2,158 1,082

1,67

0

T3 application, 100% fresh air, AHUOutdoor unit: MKXT105D/RN1(Units: mm)

Air intake side without part A Air intake side with part A

Part A

19 20

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Heat pump, medium static pressure duct

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input

EER

Controller

dB(A)

76,000

22.3

7.5

2.97

1,300

5.2

4,250 (2,500CFM)

100

94 / 106

56

MOV-76HN1-R / 1

1,452×462×797

1,555×500×875

MTB-76HWN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

1,400

5.8

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wired controller (KJR-29B1/BK-E)

96 / 108

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,452×462×797

1,555×500×875

MTB-96HWN1

120,000

35.0

11.9

2.94

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,300

25.0

8.3

3.01

106,000

31.1

10.3

3.02

129,700

38.0

12.7

2.99

2,000

9.0

6,375 (3,750CFM)

100

1,452×462×797

97 / 109

1,555×500×875

63

MOV-120HN1-R / 1

MTB-120HWN1

Pa

MTB-76HWN1

MTB-96HWN1

MTB-120HWN1

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3

28.6

69

Scroll / 1

R410A / 7.5kg

Axial / Direct

MOV-120HN1-RMOV-76HN1-R

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

201 / 217

1,320×1,060×730

1,260×908×700

MOV-120HN1-R

19 20

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Heat pump, medium static pressure duct

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input

EER

Controller

dB(A)

76,000

22.3

7.5

2.97

1,300

5.2

4,250 (2,500CFM)

100

94 / 106

56

MOV-76HN1-R / 1

1,452×462×797

1,555×500×875

MTB-76HWN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

1,400

5.8

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wired controller (KJR-29B1/BK-E)

96 / 108

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,452×462×797

1,555×500×875

MTB-96HWN1

120,000

35.0

11.9

2.94

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,300

25.0

8.3

3.01

106,000

31.1

10.3

3.02

129,700

38.0

12.7

2.99

2,000

9.0

6,375 (3,750CFM)

100

1,452×462×797

97 / 109

1,555×500×875

63

MOV-120HN1-R / 1

MTB-120HWN1

Pa

MTB-76HWN1

MTB-96HWN1

MTB-120HWN1

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3

28.6

69

Scroll / 1

R410A / 7.5kg

Axial / Direct

MOV-120HN1-RMOV-76HN1-R

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

201 / 217

1,320×1,060×730

1,260×908×700

MOV-120HN1-R

21 22

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Heat pump, high static pressure duct

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input

EER

Controller

dB(A)

76,000

22.3

7.5

2.97

1,300

5.2

4,250 (2,500CFM)

196

94 / 106

56

MOV-76HN1-R / 1

1,452×462×797

1,555×500×875

MHB-76HWN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

1,400

5.8

5,100 (3,000CFM)

196

Copper tube and aluminum fin

Wired controller (KJR-29B1/BK-E)

96 / 108

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,452×462×797

1,555×500×875

MHB-96HWN1

192,000

56.3

22.0

2.56

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,300

25.0

8.3

3.01

106,000

31.0

10.3

3.02

200,000

58.6

19.3

3.04

4,690

20.9

10,800 (6,350CFM)

196

1,988×669×906

215 / 230

2,095×800×964

65

MOV-192HN1-R / 1

MHA-192HWN1

150,100

44.0

16.3

2.70

160,300

47.0

15.7

2.99

2,730

12.1

8,500 (5,000CFM)

196

1,988×669×906

208 / 220

2,095×800×964

63

MOV-150HN1-R / 1

MHA-150HWN1

Pa

MHB-76HWN1

MHB-96HWN1

MHA-150HWN1

MHA-192HWN1

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

32.2

53.8

73

Scroll / 3

R410A / 11.8kg

Axial / Direct

MOV-150HN1-R MOV-192HN1-RMOV-76HN1-R

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Φ16 (Liquid), Φ32 (Gas)

320 / 336

1,455×1,790×830

1,390×1,615×765

MOV-192HN1-R

26.9

47.9

70

Scroll / 3

R410A / 10.0kg

Axial / Direct

17~46

Φ16 (Liquid), Φ32 (Gas)

288 / 308

1,305×1,790×820

1,250×1,615×765

MOV-150HN1-R

21 22

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Heat pump, high static pressure duct

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input

EER

Controller

dB(A)

76,000

22.3

7.5

2.97

1,300

5.2

4,250 (2,500CFM)

196

94 / 106

56

MOV-76HN1-R / 1

1,452×462×797

1,555×500×875

MHB-76HWN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

1,400

5.8

5,100 (3,000CFM)

196

Copper tube and aluminum fin

Wired controller (KJR-29B1/BK-E)

96 / 108

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,452×462×797

1,555×500×875

MHB-96HWN1

192,000

56.3

22.0

2.56

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,300

25.0

8.3

3.01

106,000

31.0

10.3

3.02

200,000

58.6

19.3

3.04

4,690

20.9

10,800 (6,350CFM)

196

1,988×669×906

215 / 230

2,095×800×964

65

MOV-192HN1-R / 1

MHA-192HWN1

150,100

44.0

16.3

2.70

160,300

47.0

15.7

2.99

2,730

12.1

8,500 (5,000CFM)

196

1,988×669×906

208 / 220

2,095×800×964

63

MOV-150HN1-R / 1

MHA-150HWN1

Pa

MHB-76HWN1

MHB-96HWN1

MHA-150HWN1

MHA-192HWN1

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

32.2

53.8

73

Scroll / 3

R410A / 11.8kg

Axial / Direct

MOV-150HN1-R MOV-192HN1-RMOV-76HN1-R

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Φ16 (Liquid), Φ32 (Gas)

320 / 336

1,455×1,790×830

1,390×1,615×765

MOV-192HN1-R

26.9

47.9

70

Scroll / 3

R410A / 10.0kg

Axial / Direct

17~46

Φ16 (Liquid), Φ32 (Gas)

288 / 308

1,305×1,790×820

1,250×1,615×765

MOV-150HN1-R

23 24

Cont

rolle

rs

Cont

rolle

rs

Heat pump, medium static pressure duct

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11,700 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

100

105 / 120

58

MOV-76HN1-C / 1

1,443×450×846

1,549×476×917

MTA-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

1,400 (IDU)

5.8 (IDU)

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wireless controller (R51/E) Wired controller (KJR-29B) Wireless controller (R51/E)

97 / 109

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1452×462×797

1,555×500×875

MTB1T-96HWN1

119,400 / 102,400

35.0 / 30.0

12.0 / 13.25

2.92

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,000

25.0

8.3

3.01

106,000

31.1

10.3

3.02

130,000

38.0

12.6

3.02

17,300 (Whole units)

28.6 (Whole units)

6,375 (3,750CFM)

150

1,988×669×906

188 / 220

2,095×800×964

63

MOV-120HN1-C / 1

MTA-120HRN1

Pa

MTA-120HRN1MTA-76HRN1 MTB1T-96HWN1

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

MOV-120HN1-CMOV-76HN1-C

MOVTA-96HN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

201 / 217

1,320×1,060×730

1,260×908×700

MOV-120HN1-C

23 24

Cont

rolle

rs

Cont

rolle

rs

Heat pump, medium static pressure duct

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

W

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11,700 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

100

105 / 120

58

MOV-76HN1-C / 1

1,443×450×846

1,549×476×917

MTA-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

1,400 (IDU)

5.8 (IDU)

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wireless controller (R51/E) Wired controller (KJR-29B) Wireless controller (R51/E)

97 / 109

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1452×462×797

1,555×500×875

MTB1T-96HWN1

119,400 / 102,400

35.0 / 30.0

12.0 / 13.25

2.92

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,000

25.0

8.3

3.01

106,000

31.1

10.3

3.02

130,000

38.0

12.6

3.02

17,300 (Whole units)

28.6 (Whole units)

6,375 (3,750CFM)

150

1,988×669×906

188 / 220

2,095×800×964

63

MOV-120HN1-C / 1

MTA-120HRN1

Pa

MTA-120HRN1MTA-76HRN1 MTB1T-96HWN1

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

MOV-120HN1-CMOV-76HN1-C

MOVTA-96HN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

201 / 217

1,320×1,060×730

1,260×908×700

MOV-120HN1-C

25 26

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Medium static pressure duct, cooling only

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

100

105 / 120

58

MOV-76CN1-C / 1

1,443×450×846

1,549×476×917

MTA-76CRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.0

2.93

1.4 (IDU)

5.8 (IDU)

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wireless controller (R51/CE) Wireless controller (R51/CE) Wireless controller (R51/CE)Wired controller (KJR-29B)

97 / 109

Centrifugal / Direct

56

MOVTA-96CN1-R / 1

1,452×462×797

1,555×500×875

MTB1T-96CWN1

150,100 / 130,300

44.0 / 38.2

15.1 / 18.00

2.91

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

-

-

-

-

-

-

-

-

-

-

-

-

21.2 (Whole units)

35.0 (Whole units)

7,650 (4,500CFM)

150

1,988×669×906

188 / 200

2,095×800×964

79

MOV-76CN1-C / 2

MTA-150CRN1

119,400 / 102,400

35.0 / 30.0

12.0 / 13.25

2.92

-

-

-

-

17.3 (Whole units)

28.6 (Whole units)

6,375 (3,750CFM)

150

1,988×669×906

188 / 220

2,095×800×964

63

MOV-120CN1-C / 1

MTA-120CRN1

Pa

MTA-76CRN1 MTB1T-96CWN1 MTA-120CRN1 MTA-150CRN1

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

MOV-120CN1-CMOV-76CN1-C

MOVTA-96CN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

199 / 215

1,320×1,060×730

1,260×908×700

MOV-120CN1-C

25 26

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Medium static pressure duct, cooling only

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

100

105 / 120

58

MOV-76CN1-C / 1

1,443×450×846

1,549×476×917

MTA-76CRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.0

2.93

1.4 (IDU)

5.8 (IDU)

5,100 (3,000CFM)

100

Copper tube and aluminum fin

Wireless controller (R51/CE) Wireless controller (R51/CE) Wireless controller (R51/CE)Wired controller (KJR-29B)

97 / 109

Centrifugal / Direct

56

MOVTA-96CN1-R / 1

1,452×462×797

1,555×500×875

MTB1T-96CWN1

150,100 / 130,300

44.0 / 38.2

15.1 / 18.00

2.91

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

-

-

-

-

-

-

-

-

-

-

-

-

21.2 (Whole units)

35.0 (Whole units)

7,650 (4,500CFM)

150

1,988×669×906

188 / 200

2,095×800×964

79

MOV-76CN1-C / 2

MTA-150CRN1

119,400 / 102,400

35.0 / 30.0

12.0 / 13.25

2.92

-

-

-

-

17.3 (Whole units)

28.6 (Whole units)

6,375 (3,750CFM)

150

1,988×669×906

188 / 220

2,095×800×964

63

MOV-120CN1-C / 1

MTA-120CRN1

Pa

MTA-76CRN1 MTB1T-96CWN1 MTA-120CRN1 MTA-150CRN1

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

MOV-120CN1-CMOV-76CN1-C

MOVTA-96CN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

199 / 215

1,320×1,060×730

1,260×908×700

MOV-120CN1-C

27 28

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

High static pressure duct, heat pump & cooling only

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

196

105 / 120

58

MOV-76HN1-C / 1

1,443×450×846

1,549×476×917

MHB-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

1.4 (Whole units)

5.8 (Whole units)

5,100 (3,000CFM)

196

Copper tube and aluminum fin

Wireless controller (R51/E) Wired controller (KJR-29B) Wired controller (KJR-29B)Wireless controller (R51/CE)

97 / 109

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1,452×462×797

1,555×500×875

MHB1T-96HWN1

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,000

25.0

8.3

3.01

106,000

31.1

10.3

3.02

-

-

-

-

1.4 (Whole units)

5.8 (Whole units)

5,100 (3,000CFM)

196

1,452×462×797

97 / 109

1,555×500×875

56

MOVTA-96CN1-R / 1

MHB1T-96CWN1

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

-

-

-

-

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

196

1,443×450×846

105 / 120

1,549×476×917

58

MOV-76CN1-C / 1

MHB-76CRN1

Pa

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

Heat pump:

MHB-76HRN1

Cooling only:

MHB-76CRN1

Heat pump:

MHB1T-96HWN1

Cooling only:

MHB1T-96CWN1

Heat pump:

MOV-76HN1-C MOVTA-96HN1-R

Cooling only:

MOV-76CN1-C MOVTA-96CN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Φ9.52 (Liquid), Φ25.4 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

27 28

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

High static pressure duct, heat pump & cooling only

Speci�cations - Tropical (T3) Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Standard external static pressure

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

m3/h

Noise level (Hi)

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Controller

dB(A)

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

196

105 / 120

58

MOV-76HN1-C / 1

1,443×450×846

1,549×476×917

MHB-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

1.4 (Whole units)

5.8 (Whole units)

5,100 (3,000CFM)

196

Copper tube and aluminum fin

Wireless controller (R51/E) Wired controller (KJR-29B) Wired controller (KJR-29B)Wireless controller (R51/CE)

97 / 109

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1,452×462×797

1,555×500×875

MHB1T-96HWN1

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

Heating

CapacityBtu/h

kW

W/W

kWInput

COP

85,000

25.0

8.3

3.01

106,000

31.1

10.3

3.02

-

-

-

-

1.4 (Whole units)

5.8 (Whole units)

5,100 (3,000CFM)

196

1,452×462×797

97 / 109

1,555×500×875

56

MOVTA-96CN1-R / 1

MHB1T-96CWN1

75,100 / 64,100

22.0 / 18.8

7.5 / 8.85

2.93

-

-

-

-

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

196

1,443×450×846

105 / 120

1,549×476×917

58

MOV-76CN1-C / 1

MHB-76CRN1

Pa

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Max. current

Coil

Dimension

Noise level

Heat pump:

MHB-76HRN1

Cooling only:

MHB-76CRN1

Heat pump:

MHB1T-96HWN1

Cooling only:

MHB1T-96CWN1

Heat pump:

MOV-76HN1-C MOVTA-96HN1-R

Cooling only:

MOV-76CN1-C MOVTA-96CN1-R

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

4. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Φ9.52 (Liquid), Φ25.4 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

29 30

Floor-standing Indoor Unit

Strong wind, long distance air supply

Touch screen control

Washable inlet air �lter

R51/CER51/E

Anti-Cold

Air Function

Auto Restart

Function

Auto

Defrosting

Independent

Dehumidi�cationTimer PTC Heater

Features: Standard Optional

Screw

Screw cap

Air intake panel

Electrical box,Air �lter

Floor-standing, heat pump

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

W

A

Input

EER

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

76,000

22.3

7.5

2.97

85,300

25.0

8.3

Copper tube and aluminum fin

Remote controller (R51/E)

130 / 145

Centrifugal / Direct

56

MOV-76HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA2-76HRN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

106,000

31.0

10.3

3.01

700

3.0

4,300 (2,530CFM)

3.02

700

3.0

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/E)

140 / 154

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA2-96HRN1

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Max. current

Coil

Dimension

Noise level

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

29 30

Floor-standing Indoor Unit

Strong wind, long distance air supply

Touch screen control

Washable inlet air �lter

R51/CER51/E

Anti-Cold

Air Function

Auto Restart

Function

Auto

Defrosting

Independent

Dehumidi�cationTimer PTC Heater

Features: Standard Optional

Screw

Screw cap

Air intake panel

Electrical box,Air �lter

Floor-standing, heat pump

Speci�cations - T1 Application

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

CapacityBtu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

W

A

Input

EER

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

76,000

22.3

7.5

2.97

85,300

25.0

8.3

Copper tube and aluminum fin

Remote controller (R51/E)

130 / 145

Centrifugal / Direct

56

MOV-76HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA2-76HRN1

220~240V, 1Ph~, 50Hz

96,000

28.1

9.6

2.93

106,000

31.0

10.3

3.01

700

3.0

4,300 (2,530CFM)

3.02

700

3.0

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/E)

140 / 154

Centrifugal / Direct

56

MOV-96HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA2-96HRN1

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Max. current

Coil

Dimension

Noise level

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7

19.3

68

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~46 17~46

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-R

380~415V, 3Ph~, 50Hz

14.4

23.7

68

Scroll / 1

R410A / 5.5kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

187 / 204

1,320×1,060×730

1,260×908×700

MOV-96HN1-R

Notes:

1. Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB; refrigerant pipe length between indoor unit and outdoor

unit is 7.5m.

2. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB; refrigerant pipe length between indoor unit and

outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

31 32

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

75,100 / 64,800

22.0 / 19.0

7.5 / 8.98

2.93

85,000

25.0

8.3

Copper tube and aluminum fin

Remote controller (R51/E)

158 / 174

Centrifugal / Direct

58

MOV-76HN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

106,000

31.1

10.3

3.01

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

3.02

0.7 (IDU)

3.0 (IDU)

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/E)

140 / 154

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA3T-96HRN1 Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

75,100 / 64,800

22.0 / 19.0

7.5 / 8.98

2.93

-

-

-

Copper tube and aluminum fin

Remote controller (R51/CE)

158 / 174

Centrifugal / Direct

58

MOV-76CN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-76CRN1

220~240V, 1Ph~, 50Hz

121,000 / 110,900

35.0 / 32.5

13.0 / 15.50

2.69

-

-

-

-

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

-

17.3 (Whole units)

28.6 (Whole units)

6,060 (3,560CFM)

Copper tube and aluminum fin

Remote controller (R51/CE)

148 / 174

Centrifugal / Direct

65

MOV-120CN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-120CRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

-

-

-

-

0.7 (IDU)

3.0 (IDU)

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/CE)

140 / 154

Centrifugal / Direct

56

MOVTA-96CN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA3T-96CRN1

Floor-standing, heat pump

Speci�cations - T3 ApplicationFloor-standing, cooling only

Speci�cations - T3 Application

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.

3. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Max. current

Coil

Dimension

Noise level

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB.

4. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.

5. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

199 / 215

1,320×1,060×730

1,260×908×700

MOV-120CN1-C

31 32

Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

75,100 / 64,800

22.0 / 19.0

7.5 / 8.98

2.93

85,000

25.0

8.3

Copper tube and aluminum fin

Remote controller (R51/E)

158 / 174

Centrifugal / Direct

58

MOV-76HN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-76HRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

106,000

31.1

10.3

3.01

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

3.02

0.7 (IDU)

3.0 (IDU)

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/E)

140 / 154

Centrifugal / Direct

56

MOVTA-96HN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA3T-96HRN1 Indoor unit model

Cooling

Indoor unit power supply

Outdoor unit model / Quantity

Air flow (Hi)

Max. power input

Max. current

Coil

Fan type / Drive type

DimensionNet (W×H×D)

Net / Gross weight

Packing (W×H×D)

Capacity (T1/T3)Btu/h

kW

W/W

kW

Btu/h

kW

W/W

kW

m3/h

Noise level

mm

mm

kg

kW

A

Input (T1/T3)

EER (T1)

Heating

Capacity

Input

COP

Controller

dB(A)

220~240V, 1Ph~, 50Hz

75,100 / 64,800

22.0 / 19.0

7.5 / 8.98

2.93

-

-

-

Copper tube and aluminum fin

Remote controller (R51/CE)

158 / 174

Centrifugal / Direct

58

MOV-76CN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-76CRN1

220~240V, 1Ph~, 50Hz

121,000 / 110,900

35.0 / 32.5

13.0 / 15.50

2.69

-

-

-

-

11.7 (Whole units)

19.3 (Whole units)

4,250 (2,500CFM)

-

17.3 (Whole units)

28.6 (Whole units)

6,060 (3,560CFM)

Copper tube and aluminum fin

Remote controller (R51/CE)

148 / 174

Centrifugal / Direct

65

MOV-120CN1-C / 1

1,200×1,860×518

1,362×2,050×582

MFA-120CRN1

220~240V, 1Ph~, 50Hz

96,000 / 87,860

28.1 / 25.75

9.6 / 15.00

2.93

-

-

-

-

0.7 (IDU)

3.0 (IDU)

4,800 (2,825CFM)

Copper tube and aluminum fin

Remote controller (R51/CE)

140 / 154

Centrifugal / Direct

56

MOVTA-96CN1-R / 1

1,200×1,860×518

1,362×2,050×582

MFA3T-96CRN1

Floor-standing, heat pump

Speci�cations - T3 ApplicationFloor-standing, cooling only

Speci�cations - T3 Application

Notes:

1. T1 Cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.

2. T3 Cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.

3. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.

3. Specifications are subject to change without prior notice for product improvement.

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Max. current

Coil

Dimension

Noise level

Notes:

1. T1 cooling capacity test condition: Outdoor ambient temperature: 35°C, indoor temperature 27°C DB / 19°C WB.

2. T3 cooling capacity test condition: Outdoor ambient temperature: 46°C, indoor temperature 27°C DB / 19°C WB.

3. Heating capacity test condition: Outdoor ambient temperature: 7°C DB / 6°C WB, indoor temperature 20°C DB / 15°C WB.

4. Refrigerant pipe length between indoor unit and outdoor unit is 7.5m.

5. Specifications are subject to change without prior notice for product improvement.

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52

174 / 193

1,320×1,060×730

1,260×908×700

MOV-76HN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

177 / 192

1,320×1,060×730

1,312×919×658

MOVTA-96HN1-R

Max. current

Coil

Dimension

Noise level

380~415V, 3Ph~, 50Hz

17.3 (Whole units)

28.6 (Whole units)

69

Scroll / 1

R410A / 7.2kg

Axial / Direct

Outdoor unit power supply

Outdoor unit model

Compressor (Type / Quantity)

Refrigerant (Type / Charged)

Max. power input

Fan type / Drive type

Body (W×H×D)

Net / Gross weight

Packing (W×H×D)

mm

mm

°C

mm

kg

kW

A

Refrigerant piping size

Ambient temperature

dB(A)

380~415V, 3Ph~, 50Hz

11.7 (Whole units)

19.3 (Whole units)

65

Scroll / 1

R410A / 5.4kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ22 (Gas)

17~52 17~52 17~52

171 / 190

1,320×1,060×730

1,260×908×700

MOV-76CN1-C

380~415V, 3Ph~, 50Hz

14.4 (ODU)

23.7 (ODU)

68

Scroll / 1

R410A / 6.0kg

Axial / Direct

Copper tube and aluminum fin

Φ9.52 (Liquid), Φ25 (Gas)

168 / 183

1,320×1,060×730

1,312×919×658

MOVTA-96CN1-R

Copper tube and aluminum fin

Φ12.7 (Liquid), Φ28.6 (Gas)

199 / 215

1,320×1,060×730

1,260×908×700

MOV-120CN1-C

Tropical (T3) applicationDuct indoor unit: MTA-76HRN1, MTA-76CRN1 MHB-76HRN1, MHB-76CRN1(Units: mm)

1,350 760

450

1,205

231132

26

656469

800840

507

180

45

33 34

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Dimensions

T1 applicationDuct indoor unit: MHA-150HWN1, MHA-192HWN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5180

24

1,372 704

462

1,231

224462

47

758797

196

153

30

24 112

1,372 704

462

1,231

224462

47

758797

196

153

30

24 112

T1 applicationDuct indoor unit: MTB-76HWN1, MTB-96HWN1, MTB-120HWN1 MHB-76HWN1, MHB-96HWN1(Units: mm)

Tropical (T3) applicationDuct indoor unit: MTA-120HRN1, MTA-120CRN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5180

24

Tropical (T3) applicationDuct indoor unit: MTA-150CRN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5

10824

259.5

168

Tropical (T3) applicationDuct indoor unit: MTB1T-96HWN1, MTB1T-96CWN1 MHB1T-96HWN1, MHB1T-96CWN1

Tropical (T3) applicationDuct indoor unit: MTA-76HRN1, MTA-76CRN1 MHB-76HRN1, MHB-76CRN1(Units: mm)

1,350 760

450

1,205

231132

26

656469

800840

507

180

45

33 34

Trop

ical

(T3)

App

licat

ion

Trop

ical

(T3)

App

licat

ion

Dimensions

T1 applicationDuct indoor unit: MHA-150HWN1, MHA-192HWN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5180

24

1,372 704

462

1,231

224462

47

758797

196

153

30

24 112

1,372 704

462

1,231

224462

47

758797

196

153

30

24 112

T1 applicationDuct indoor unit: MTB-76HWN1, MTB-96HWN1, MTB-120HWN1 MHB-76HWN1, MHB-96HWN1(Units: mm)

Tropical (T3) applicationDuct indoor unit: MTA-120HRN1, MTA-120CRN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5180

24

Tropical (T3) applicationDuct indoor unit: MTA-150CRN1(Units: mm)

1,834 858.5

645

1,895

180

47106 123

1556.5

749.5

10824

259.5

168

Tropical (T3) applicationDuct indoor unit: MTB1T-96HWN1, MTB1T-96CWN1 MHB1T-96HWN1, MHB1T-96CWN1

T1 & Tropical (T3) applicationFloor-standing indoor unit: MFA2-76HRN1, MFA2-96HRN1, MFA-76HRN1, MFA-76CRN1, MFA3T-96HRN1, MFA3T-96CRN1, MFAT-120CRN1 (Units: mm)

460

960 118

1,196

1,200420

1,860

140

93

35 36

Cont

rolle

rs

Cont

rolle

rs

737

1,260 654

908

519

676700

762

1,260 658

919

20669

9187

435

105

1,312

1,288

T1 & Tropical (T3) applicationOutdoor unit: MOVTA-96HN1-R, MOVTA-96CN1-R(Units: mm)

1,260 654

908

179

57

676700

762

T1 & Tropical (T3) applicationOutdoor unit: MOV-76HN1-R, MOV-96HN1-R, MOV-76HN1-C, MOV-76CN1-C(Units: mm)

T1 & Tropical (T3) applicationOutdoor unit: MOV-120HN1-R MOV-120HN1-C MOV-120CN1-C(Units: mm)

T1 applicationOutdoor unit: MOV-150HN1-R(Units: mm)

T1 applicationOutdoor unit: MOV-192HN1-R(Units: mm)

736 1,200

1,615

7651,250

765

1,250

1,615

1,260 736

765

1,390

T1 & Tropical (T3) applicationFloor-standing indoor unit: MFA2-76HRN1, MFA2-96HRN1, MFA-76HRN1, MFA-76CRN1, MFA3T-96HRN1, MFA3T-96CRN1, MFAT-120CRN1 (Units: mm)

460

960 118

1,196

1,200420

1,860

140

93

35 36

Cont

rolle

rs

Cont

rolle

rs

737

1,260 654

908

519

676700

762

1,260 658

919

20669

9187

435

105

1,312

1,288

T1 & Tropical (T3) applicationOutdoor unit: MOVTA-96HN1-R, MOVTA-96CN1-R(Units: mm)

1,260 654

908

179

57

676700

762

T1 & Tropical (T3) applicationOutdoor unit: MOV-76HN1-R, MOV-96HN1-R, MOV-76HN1-C, MOV-76CN1-C(Units: mm)

T1 & Tropical (T3) applicationOutdoor unit: MOV-120HN1-R MOV-120HN1-C MOV-120CN1-C(Units: mm)

T1 applicationOutdoor unit: MOV-150HN1-R(Units: mm)

T1 applicationOutdoor unit: MOV-192HN1-R(Units: mm)

736 1,200

1,615

7651,250

765

1,250

1,615

1,260 736

765

1,390

37 38

Cont

rolle

rs

Cont

rolle

rs

ParameterModel: R51/CE (Cooling only type)

R51/E (Heat pump type)

Dimension (mm): 140×60×15

Power: 1.5V (LR03/AAA)×2

ParameterModel: KJR-29B (Touch-style key)

Dimension (mm): 120×120×20

Power: From the display panel, extra power is unnecessary.

Standard features It provides a convenient way for users to control the air conditioners everywhere within a range up to 11m.

Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to

the set time.

Standard features Keyboard locking function as standard, it can be used to prevent other people from using the controller.

Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to

the set time.

Controllers

Remote Controller - R51

Wired Controller - KJR-29B

Remote signal receiving function KJR-29B provides a signal receiver to receive the signal from

remote controller.

The received signal can be directly sent to the indoor unit by

wired controller. It is convenient to control the air conditioner.

Remote signal receiver

Silent Key

Three lock modes Centralized controller provides a superior way to manage the indoor units. Users can be able to make their own choice

from three locking mode: locking the wireless controller, locking the running mode or locking centralized controller

keyboard as they wish.

Easy installation Two structures design, easy installation. Structure A (Model No. CCM30/BKE-A) should be embedded into the wall and

structure B (Model No. CCM30/BKE-B) doesn’t need.

Centralized control MD-CCM30, centralized controller, is a multifunctional device that can control up to 64 indoor units within a maximum

connection length of 1200m.

User can group control or individual control and the set temperature of each units can also different.

The indoor units working status and error codes can be displayed in the screen of CCM30. Via checking the error codes

table in the user manual, user can easily find out the malfunction and call the service engineer.

Centralized Controller - CCM30

Silent mode During the operating, when operate the silent mode, the units can reduce the running noise through setting the fan speed

to low automatically. It will help you bring a quieter environment.

CCM30 MD-NIM01

ParameterModel: CCM30 + MD-NIM01

Dimension (mm): 180×122×78 (CCM30BKE-B)

180×122×68 (CCM30BKE-A)

81.8×46.8×15.5 (MD-NIM01)

Power: 198~242V, 50/60Hz (MD-CCM30)

DC+5V (MD-NIM01)

Access to network monitoring MD-CCM30 is able to bridge up to 64 indoor units to network monitoring system and building management system.

Structure A Structure B

Max.64MD-NIM01 MD-NIM01 MD-NIM01 MD-NIM01

CCM30

Structure B leading-out mode sketch

Rear side outlet

Under side outlet

Upper side outlet

37 38

Cont

rolle

rs

Cont

rolle

rs

ParameterModel: R51/CE (Cooling only type)

R51/E (Heat pump type)

Dimension (mm): 140×60×15

Power: 1.5V (LR03/AAA)×2

ParameterModel: KJR-29B (Touch-style key)

Dimension (mm): 120×120×20

Power: From the display panel, extra power is unnecessary.

Standard features It provides a convenient way for users to control the air conditioners everywhere within a range up to 11m.

Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to

the set time.

Standard features Keyboard locking function as standard, it can be used to prevent other people from using the controller.

Built-in daily timer offers the convenience of automatically starting and turning down the air conditioners according to

the set time.

Controllers

Remote Controller - R51

Wired Controller - KJR-29B

Remote signal receiving function KJR-29B provides a signal receiver to receive the signal from

remote controller.

The received signal can be directly sent to the indoor unit by

wired controller. It is convenient to control the air conditioner.

Remote signal receiver

Silent Key

Three lock modes Centralized controller provides a superior way to manage the indoor units. Users can be able to make their own choice

from three locking mode: locking the wireless controller, locking the running mode or locking centralized controller

keyboard as they wish.

Easy installation Two structures design, easy installation. Structure A (Model No. CCM30/BKE-A) should be embedded into the wall and

structure B (Model No. CCM30/BKE-B) doesn’t need.

Centralized control MD-CCM30, centralized controller, is a multifunctional device that can control up to 64 indoor units within a maximum

connection length of 1200m.

User can group control or individual control and the set temperature of each units can also different.

The indoor units working status and error codes can be displayed in the screen of CCM30. Via checking the error codes

table in the user manual, user can easily find out the malfunction and call the service engineer.

Centralized Controller - CCM30

Silent mode During the operating, when operate the silent mode, the units can reduce the running noise through setting the fan speed

to low automatically. It will help you bring a quieter environment.

CCM30 MD-NIM01

ParameterModel: CCM30 + MD-NIM01

Dimension (mm): 180×122×78 (CCM30BKE-B)

180×122×68 (CCM30BKE-A)

81.8×46.8×15.5 (MD-NIM01)

Power: 198~242V, 50/60Hz (MD-CCM30)

DC+5V (MD-NIM01)

Access to network monitoring MD-CCM30 is able to bridge up to 64 indoor units to network monitoring system and building management system.

Structure A Structure B

Max.64MD-NIM01 MD-NIM01 MD-NIM01 MD-NIM01

CCM30

Structure B leading-out mode sketch

Rear side outlet

Under side outlet

Upper side outlet

iOS Version Android Version

Midea CAC After-service Application

iOS Version

Midea CAC News Application

1605-1S1512

Commercial Air Conditioner DivisionMidea GroupAdd.: West Region of Midea Commercial Air Conditioner Department, Industry Avenue,

Beijiao, Shunde, Foshan, Guangdong, P. R. China

Postal code: 528311

Tel: +86-757-26338346 Fax: +86-757-22390205

cac.midea.com global.midea.com

Note: The data in this book may be changed without notice for further improvement

on quality and performance.

Commercial Air Conditioners 2016

R410A 50Hz

Split Commercial A/C