GARNET XSCNC Controlled Profile Machining Center (3 Axis)

www.oz-machine.com by

01By focusing on providing convenient solutions for customers, and combining power and precision, GARNET XS lets the process-ing capacity be only limited by the users imagination, thanks to the 5.5 KW spindle motor with automatic tool replacement feature.

03With full automatic clamp positioning, GARNET XS automates many tasks assuming the work load of the user.

04Maintenance of transmission elements is accomplished by the automatic lubrication system which is offered as an optional feature increasing the service life for accuracy in processes.Capacity may be varied for processing of non-standard profiles with on demand optimization of size and number of clamps.

02Thanks to its built-in automatic magazine with capacity for 10 tools, GARNET XS saves time when switching to different operations.

Thanks its spindle which can operate in -90, 0 and +90 fixed angles, the 3-axis CNC machining center, GARNET XS can process different sizes of aluminum and PVC profiles and offer a wide spectrum of solutions to the user. The machine is developed to

carry out all-in-one milling, drain channel opening, punching, branding and end milling operations on aluminum and PVC profiles, and to perform special non-standard operations on different profiles The high processing capacity (200 mm x 200 mm) provides satisfactory user

experience with the machines' performance in all operations.

GARNET XSCNC Controlled Profile Machining Center (3 Axis)

www.oz-machine.com by

FEATURES

Used for performing milling, drain channel opening, drilling, branding and milling processes on aluminum and PVC profiles. » Non-standard specific operations on different profiles » CNC based control system » Ability to process at fixed angles of -90, 0 and +90 degrees » Automatic tool replacement » Automatic magazine for 10 tools » Automatic clamping positioning » Touchscreen » Remote access » High processing capacity to increase efficiency » 6000 mm profile can be machined by driving » Automatic lubrication in processing area

OPERATIONAL EQUIPMENT

» FRL » Automatic lubrication in processing area » Additional tool » Optional length on X-axis » Touchscreen » Remote access » Automatic tool replacement » Automatic magazine for 10 tools » Automatic clamping positioning

Optional Included

1749

mm

500 mm

2123

mm

1876 mm

414

mm

5006 mm

4506 mm

1709

mm

GARNET XSCNC Controlled Profile Machining Center (3 Axis)

www.oz-machine.com by

AXIAL DISTANCESX Axis (Longitudinal) 3380 mm

Y Axis (Lateral) 1060 mm

Z Axis (Vertical) 317 mm

W Axis (Head processing angles) -90° | 0 | +90°

PROCESSING LENGTHSX Axis (Longitudinal) 3000 mm

Y Axis (Lateral) 200 mm

Z Axis (Vertical) 200 mm

POSITIONING SPEEDX Axis (Longitudinal) 90 m/min

Y Axis (Lateral) 40 m/min

Z Axis (Vertical) 40 m/min

SPINDLE (HSD)Max. Rotation Speed 24000 rpm

Tool Holder ISO 30

Spindle Power 5 kW

Cooling Type Electric Fan

Tool Holders ER32

PROCESSABLE UNITSDirectly with tool (upper surface, lateral surface, heads) 4

AIRPressure 6-8 Bar

END MILLING UNITSaw Blade Diameter 200 mm

AUTOMATIC TOOL MAGAZINETool Magazine 10

PROFILE POSITIONINGProfile Reference Alignment 2

OPERATIONAL AREA CLAMPING UNITClamps, Standard Quantity 4

Clamps, Maximum Quantity 6

Automatic Clamp Positioning on X-axis

Özçelik, reserves the right to make modifications or improvements on any product without prior notice.