cisco wireless lan controller command reference, release 8.0
DESCRIPTION
Command line reference guide for Cisco Wireless controllers.TRANSCRIPT
-
Cisco Wireless LAN Controller Command Reference, Release 8.0First Published: January 22, 2014
Last Modified: October 23, 2014
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883
Text Part Number: OL-31334-01
-
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS,INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITEDWARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITHTHE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY,CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB's public domain versionof the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.
NOTWITHSTANDINGANYOTHERWARRANTYHEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS"WITH ALL FAULTS.CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OFMERCHANTABILITY, FITNESS FORA PARTICULAR PURPOSEANDNONINFRINGEMENTORARISING FROMACOURSEOFDEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUTLIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERSHAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, networktopology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentionaland coincidental.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: http://www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnershiprelationship between Cisco and any other company. (1110R)
2014 Cisco Systems, Inc. All rights reserved.
-
C O N T E N T S
P r e f a c e Preface li
Audience li
Document Organization li
Document Conventions li
Related Documentation liv
Obtaining Documentation and Submitting a Service Request liv
C H A P T E R 1 Using the Command-Line Interface 1
CLI Command Keyboard Shortcuts 1
Using the Interactive Help Feature 2
Using the help Command 3
Using the ? command 3
Using the partial? command 4
Using the partial command 4
Using the command ? 5
command keyword ? 6
P A R T I System Management Commands 7
C H A P T E R 2 CLI Commands 9
show Commands 9
show 802.11 cu-metrics 10
show advanced 802.11 l2roam 11
show advanced send-disassoc-on-handoff 12
show advanced sip-preferred-call-no 13
show advanced sip-snooping-ports 14
show arp kernel 15
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 iii
-
show arp switch 16
show avc applications 17
show avc engine 18
show avc profile 19
show avc protocol-pack 20
show avc statistics application 21
show avc statistics client 23
show avc statistics guest-lan 25
show avc statistics remote-lan 27
show avc statistics top-apps 29
show avc statistics wlan 31
show boot 33
show band-select 34
show buffers 35
show cac voice stats 37
show cac voice summary 38
show cac video stats 39
show cac video summary 41
show cdp 42
show certificate compatibility 43
show certificate lsc 44
show certificate ssc 45
show certificate summary 46
show client calls 47
show client roam-history 48
show client summary 49
show client summary guest-lan 51
show client tsm 52
show client username 54
show client voice-diag 55
show coredump summary 56
show cpu 57
show custom-web 58
show database summary 59
show dhcp 60
Cisco Wireless LAN Controller Command Reference, Release 8.0iv OL-31334-01
Contents
-
show dtls connections 61
show dhcp proxy 62
show dhcp timeout 63
show flow exporter 64
show flow monitor summary 65
show guest-lan 66
show invalid-config 67
show inventory 68
show license all 69
show license capacity 71
show license detail 72
show license expiring 73
show license evaluation 74
show license feature 75
show license file 76
show license handle 77
show license image-level 78
show license in-use 79
show license permanent 80
show license status 81
show license statistics 82
show license summary 83
show license udi 84
show load-balancing 85
show local-auth certificates 86
show logging 87
show loginsession 89
show mesh cac 90
show mdns ap summary 92
show mdns domain-name-ip summary 93
show mdns profile 95
show mdns service 97
show mgmtuser 99
show mobility group member 100
show netuser 101
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 v
Contents
-
show netuser guest-roles 102
show network 103
show network summary 104
show network multicast mgid detail 106
show network multicast mgid summary 107
show nmsp notify-interval summary 108
show nmsp statistics 109
show nmsp status 111
show nmsp subscription 112
show ntp-keys 113
show qos 114
show queue-info 115
show reset 117
show route kernel 118
show route summary 119
show run-config 120
show run-config startup-commands 121
show sessions 122
show snmpcommunity 123
show snmpengineID 124
show snmptrap 125
show snmpv3user 126
show snmpversion 127
show switchconfig 128
show sysinfo 129
show system iostat 130
show system top 131
show tech-support 135
show time 136
show trapflags 138
show traplog 140
show queue-info 141
show rfid client 143
show rfid config 144
show rfid detail 145
Cisco Wireless LAN Controller Command Reference, Release 8.0vi OL-31334-01
Contents
-
show rfid summary 146
config Commands 146
config 802.11h channelswitch 147
config 802.11h powerconstraint 148
config 802.11h setchannel 149
config 802.11 11nsupport 150
config 802.11 11nsupport a-mpdu tx priority 151
config 802.11 11nsupport a-mpdu tx scheduler 153
config 802.11 11nsupport antenna 154
config 802.11 11nsupport guard-interval 155
config 802.11 11nsupport mcs tx 156
config 802.11 11nsupport rifs 158
config 802.11 beacon period 159
config 802.11 cac defaults 160
config 802.11 cac video acm 162
config 802.11 cac video cac-method 164
config 802.11 cac video load-based 166
config 802.11 cac video max-bandwidth 168
config 802.11 cac media-stream 170
config 802.11 cac multimedia 172
config 802.11 cac video roam-bandwidth 174
config 802.11 cac video sip 176
config 802.11 cac video tspec-inactivity-timeout 178
config 802.11 cac voice acm 180
config 802.11 cac voice max-bandwidth 181
config 802.11 cac voice roam-bandwidth 183
config 802.11 cac voice tspec-inactivity-timeout 185
config 802.11 cac voice load-based 187
config 802.11 cac voice max-calls 189
config 802.11 cac voice sip bandwidth 191
config 802.11 cac voice sip codec 193
config 802.11 cac voice stream-size 195
config 802.11 disable 197
config 802.11 dtpc 198
config 802.11 enable 199
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 vii
Contents
-
config 802.11 exp-bwreq 200
config 802.11 fragmentation 201
config 802.11 l2roam rf-params 202
config 802.11 max-clients 204
config 802.11 multicast data-rate 205
config 802.11 rate 206
config 802.11 rssi-check 207
config 802.11 rssi-threshold 208
config 802.11 tsm 209
config advanced 802.11 7920VSIEConfig 210
config advanced 802.11 edca-parameters 211
config advanced fastpath fastcache 213
config advanced fastpath pkt-capture 214
config advanced sip-preferred-call-no 215
config advanced sip-snooping-ports 216
config avc profile create 217
config avc profile delete 218
config avc profile rule 219
config band-select cycle-count 221
config band-select cycle-threshold 222
config band-select expire 223
config band-select client-rssi 224
config boot 225
config cdp 226
config certificate 227
config certificate lsc 228
config certificate ssc 230
config certificate use-device-certificate webadmin 232
config coredump 233
config coredump ftp 234
config coredump username 235
config custom-web ext-webauth-mode 236
config custom-web ext-webauth-url 237
config custom-web ext-webserver 238
config custom-web logout-popup 239
Cisco Wireless LAN Controller Command Reference, Release 8.0viii OL-31334-01
Contents
-
config custom-web radiusauth 240
config custom-web redirectUrl 241
config custom-web sleep-client 242
config custom-web webauth-type 243
config custom-web weblogo 244
config custom-web webmessage 245
config custom-web webtitle 246
config dhcp 247
config dhcp proxy 250
config dhcp timeout 251
config flow 252
config guest-lan 254
config guest-lan custom-web ext-webauth-url 255
config guest-lan custom-web global disable 256
config guest-lan custom-web login_page 257
config guest-lan custom-web webauth-type 258
config guest-lan ingress-interface 259
config guest-lan interface 260
config guest-lan mobility anchor 261
config guest-lan nac 262
config guest-lan security 263
config license boot 264
config load-balancing 266
config location 268
config logging buffered 270
config logging console 271
config logging debug 272
config logging fileinfo 273
config logging procinfo 274
config logging traceinfo 275
config logging syslog host 276
config logging syslog facility 279
config logging syslog level 281
config loginsession close 282
config mdns ap 283
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 ix
Contents
-
config mdns profile 285
config mdns query interval 287
config mdns service 289
config mdns snooping 292
config mdns policy enable 294
config mdns policy service-group create | delete 295
config mdns policy service-group parameters 296
config mdns policy service-group user-name 297
config mdns policy service-group user-role 298
config memory monitor errors 299
config memory monitor leaks 300
config mgmtuser add 302
config mgmtuser delete 303
config mgmtuser description 304
config mgmtuser password 305
config mgmtuser telnet 306
config mobility group member 307
config netuser add 309
config netuser delete 311
config netuser description 312
config netuser guest-lan-id 313
config netuser guest-role apply 314
config netuser guest-role create 315
config netuser guest-role delete 316
config netuser guest-role qos data-rate average-data-rate 317
config netuser guest-role qos data-rate average-realtime-rate 318
config netuser guest-role qos data-rate burst-data-rate 319
config netuser guest-role qos data-rate burst-realtime-rate 320
config netuser lifetime 321
config netuser maxUserLogin 322
config netuser password 323
config netuser wlan-id 324
config network 802.3-bridging 325
config network allow-old-bridge-aps 326
config network ap-discovery 327
Cisco Wireless LAN Controller Command Reference, Release 8.0x OL-31334-01
Contents
-
config network ap-fallback 328
config network ap-priority 329
config network apple-talk 330
config network arptimeout 331
config network bridging-shared-secret 332
config network broadcast 333
config network fast-ssid-change 334
config network ip-mac-binding 335
config network link local bridging 336
config network master-base 337
config network mgmt-via-wireless 338
config network multicast global 339
config network multicast igmp query interval 340
config network multicast igmp snooping 341
config network multicast igmp timeout 342
config network multicast l2mcast 343
config network multicast mld 344
config network multicast mode multicast 345
config network multicast mode unicast 346
config network oeap-600 dual-rlan-ports 347
config network oeap-600 local-network 348
config network otap-mode 349
config network rf-network-name 350
config network secureweb 351
config network secureweb cipher-option 352
config network ssh 354
config network telnet 355
config network usertimeout 356
config network web-auth captive-bypass 357
config network web-auth cmcc-support 358
config network web-auth port 359
config network web-auth proxy-redirect 360
config network web-auth secureweb 361
config network web-auth https-redirect 362
config network webcolor 363
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xi
Contents
-
config network webmode 364
config network web-auth 365
config network zero-config 366
config nmsp notify-interval measurement 367
config paging 368
config passwd-cleartext 369
config prompt 370
config qos average-data-rate 371
config qos average-realtime-rate 373
config qos burst-data-rate 375
config qos burst-realtime-rate 377
config qos description 379
config qos max-rf-usage 380
config qos dot1p-tag 381
config qos priority 382
config qos protocol-type 384
config qos queue_length 385
config rfid auto-timeout 386
config rfid status 387
config rfid timeout 388
config service timestamps 389
config sessions maxsessions 390
config sessions timeout 391
config switchconfig boot-break 392
config switchconfig fips-prerequisite 393
config switchconfig strong-pwd 394
config switchconfig flowcontrol 397
config switchconfig mode 398
config switchconfig secret-obfuscation 399
config sysname 400
config snmp community accessmode 401
config snmp community create 402
config snmp community delete 403
config snmp community ipaddr 404
config snmp community mode 405
Cisco Wireless LAN Controller Command Reference, Release 8.0xii OL-31334-01
Contents
-
config snmp engineID 406
config snmp syscontact 407
config snmp syslocation 408
config snmp trapreceiver create 409
config snmp trapreceiver delete 410
config snmp trapreceiver mode 411
config snmp v3user create 412
config snmp v3user delete 414
config snmp version 415
config time manual 416
config time ntp 417
config time timezone 420
config time timezone location 421
config trapflags 802.11-Security 424
config trapflags aaa 425
config trapflags adjchannel-rogueap 426
config trapflags ap 428
config trapflags authentication 429
config trapflags client 430
config trapflags client max-warning-threshold 431
config trapflags configsave 433
config trapflags IPsec 434
config trapflags linkmode 435
config trapflags mesh 436
config trapflags multiusers 437
config trapflags rfid 438
config trapflags rogueap 440
config trapflags rrm-params 441
config trapflags rrm-profile 442
config trapflags stpmode 443
config trapflags strong-pwdcheck 444
config trapflags wps 445
save config 446
Timeout Commands 446
config 802.11 cac video tspec-inactivity-timeout 447
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xiii
Contents
-
config 802.11 cac voice tspec-inactivity-timeout 449
config advanced timers 451
config dhcp timeout 454
config ldap 455
config remote-lan session-timeout 458
config network usertimeout 459
config radius acct retransmit-timeout 460
config radius auth mgmt-retransmit-timeout 461
config radius auth retransmit-timeout 462
config radius auth retransmit-timeout 463
config rogue ap timeout 464
config tacacs athr mgmt-server-timeout 466
config tacacs auth mgmt-server-timeout 467
config rfid auto-timeout 468
config rfid timeout 469
config wlan session-timeout 470
config wlan usertimeout 471
config wlan security wpa akm ft 472
config wlan security ft 473
Clearing Configurations, Log files, and Other Actions 473
clear acl counters 474
clear ap config 475
clear ap eventlog 476
clear ap join stats 477
clear arp 478
clear avc statistics 479
clear client tsm 481
clear config 482
clear ext-webauth-url 483
clear location rfid 484
clear location statistics rfid 485
clear locp statistics 486
clear login-banner 487
clear lwapp private-config 488
clear mdns service-database 489
Cisco Wireless LAN Controller Command Reference, Release 8.0xiv OL-31334-01
Contents
-
clear nmsp statistics 491
clear radius acct statistics 492
clear session 493
clear tacacs auth statistics 494
clear redirect-url 495
clear stats ap wlan 496
clear stats local-auth 497
clear stats mobility 498
clear stats port 499
clear stats radius 500
clear stats switch 502
clear stats tacacs 503
clear transfer 504
clear traplog 505
clear webimage 506
clear webmessage 507
clear webtitle 508
Resetting the System Reboot Time 508
reset system at 509
reset system in 510
reset system cancel 511
reset system notify-time 512
reset peer-system 513
Uploading and Downloading Files and Configurations 513
transfer download certpasswor 514
transfer download datatype 515
transfer download filename 517
transfer download mode 518
transfer download password 519
transfer download path 520
transfer download port 521
transfer download serverip 522
transfer download start 523
transfer download tftpPktTimeout 524
transfer download tftpMaxRetries 525
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xv
Contents
-
transfer download username 526
transfer encrypt 527
transfer upload datatype 528
transfer upload filename 530
transfer upload mode 531
transfer upload pac 532
transfer upload password 533
transfer upload path 534
transfer upload peer-start 535
transfer upload port 536
transfer upload serverip 537
transfer upload start 538
transfer upload username 539
Installing and Modifying Licenses on Cisco 5500 Series Controllers 539
license clear 540
license comment 541
license install 542
license modify priority 543
license revoke 545
license save 546
Right to Use Licensing Commands 546
license activate ap-count eval 547
license activate feature 548
license add ap-count 549
license add feature 550
license deactivate ap-count eval 551
license deactivate feature 552
license delete ap-count 553
license delete feature 554
Troubleshooting the Controller Settings 554
debug arp 555
debug avc 556
debug cac 557
debug cdp 558
debug crypto 559
Cisco Wireless LAN Controller Command Reference, Release 8.0xvi OL-31334-01
Contents
-
debug dhcp 560
debug dhcp service-port 561
debug disable-all 562
debug fastpath 563
debug l2age 568
debug mac 569
debug mdns all 570
debug mdns detail 571
debug mdns error 572
debug mdns message 573
debug mdns ha 574
debug memory 575
debug nmsp 576
debug ntp 577
debug packet error 578
debug packet logging 579
debug poe 582
debug rbcp 583
debug rfid 584
debug snmp 585
debug transfer 586
debug voice-diag 587
show debug 588
show eventlog 590
show memory monitor 591
show run-config 592
show process 593
show tech-support 594
config memory monitor errors 595
config memory monitor leaks 596
config msglog level critical 598
config msglog level error 599
config msglog level security 600
config msglog level verbose 601
config msglog level warning 602
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xvii
Contents
-
ping 603
P A R T I I Ports and Interfaces Commands 605
C H A P T E R 3 CLI Commands 607
show Commands 607
show advanced sip-snooping-ports 608
show interface summary 609
show interface detailed 610
show interface group 612
show lag eth-port-hash 614
show lag ip-port-hash 615
show lag summary 616
show port 617
show serial 619
show spanningtree port 620
show spanningtree switch 621
show stats port 622
show stats switch 624
config Commands 625
config interface acl 626
config interface address 627
config interface address redundancy-management 629
config interface ap-manager 630
config interface create 631
config interface delete 632
config interface dhcp 633
config interface dhcp 635
config interface address 636
config interface guest-lan 638
config interface hostname 639
config interface nasid 640
config interface nat-address 641
config interface port 642
config interface quarantine vlan 643
Cisco Wireless LAN Controller Command Reference, Release 8.0xviii OL-31334-01
Contents
-
config interface vlan 644
config interface group mdns-profile 645
config interface mdns-profile 647
config lag 649
config macfilter add/delete 650
config macfilter description 652
config macfilter interface 653
config macfilter ip-address 654
config macfilter mac-delimiter 655
config macfilter radius-compat 656
config macfilter wlan-id 657
config port adminmode 658
config port autoneg 659
config port linktrap 660
config port multicast appliance 661
config port power 662
config route add 663
config route delete 664
config serial baudrate 665
config serial timeout 666
config spanningtree port mode 667
config spanningtree port pathcost 668
config spanningtree port priority 669
config spanningtree switch bridgepriority 670
config spanningtree switch forwarddelay 671
config spanningtree switch hellotime 672
config spanningtree switch maxage 673
config spanningtree switch mode 674
clear Commands 674
clear stats port 675
P A R T I I I VideoStream Commands 677
C H A P T E R 4 CLI Commands 679
show Commands 679
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xix
Contents
-
show 802.11 680
show 802.11 media-stream 682
show media-stream client 683
show media-stream group detail 684
show media-stream group summary 685
config Commands 685
config 802.11 cac video acm 686
config 802.11 cac video cac-method 688
config 802.11 cac video load-based 690
config 802.11 cac video max-bandwidth 692
config 802.11 cac media-stream 694
config 802.11 cac multimedia 696
config 802.11 cac video roam-bandwidth 698
config 802.11 cac video sip 700
config 802.11 cac video tspec-inactivity-timeout 702
config 802.11 cac voice acm 704
config 802.11 cac voice max-bandwidth 705
config 802.11 cac voice roam-bandwidth 707
config 802.11 cac voice tspec-inactivity-timeout 709
config 802.11 cac voice load-based 711
config 802.11 cac voice max-calls 713
config 802.11 cac voice sip bandwidth 715
config 802.11 cac voice sip codec 717
config 802.11 cac voice stream-size 719
config advanced 802.11 edca-parameters 721
config 802.11 media-stream multicast-direct 723
config 802.11 media-stream video-redirect 725
config media-stream multicast-direct 726
config media-stream message 727
config media-stream add 729
config media-stream admit 731
config media-stream deny 732
config media-stream delete 733
config wlan media-stream 734
Cisco Wireless LAN Controller Command Reference, Release 8.0xx OL-31334-01
Contents
-
P A R T I V Security Commands 735
C H A P T E R 5 CLI Commands 737
show Commands 738
show 802.11 739
show aaa auth 741
show acl 742
show acl detailed 744
show acl summary 745
show advanced eap 746
show client detail 747
show database summary 751
show exclusionlist 752
show ike 753
show IPsec 754
show ipv6 acl 756
show ipv6 summary 757
show l2tp 758
show ldap 759
show ldap statistics 760
show ldap summary 761
show local-auth certificates 762
show local-auth config 763
show local-auth statistics 765
show nac statistics 767
show nac summary 768
show netuser 769
show netuser guest-roles 770
show network 771
show network summary 772
show ntp-keys 774
show policy 775
show profiling policy summary 777
show radius acct detailed 779
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxi
Contents
-
show radius acct statistics 780
show radius auth detailed 781
show radius auth statistics 782
show radius avp-list 783
show radius summary 784
show rules 785
show switchconfig 786
show rogue adhoc custom summary 787
show rogue adhoc detailed 788
show rogue adhoc friendly summary 790
show rogue adhoc malicious summary 791
show rogue adhoc unclassified summary 792
show rogue adhoc summary 793
show rogue ap custom summary 794
show rogue ap clients 796
show rogue ap detailed 798
show rogue ap summary 800
show rogue ap friendly summary 803
show rogue ap malicious summary 805
show rogue ap unclassified summary 807
show rogue auto-contain 808
show rogue client detailed 809
show rogue client summary 810
show rogue ignore-list 811
show rogue rule detailed 813
show rogue rule summary 815
show tacacs acct statistics 816
show tacacs athr statistics 817
show tacacs auth statistics 818
show tacacs summary 819
show wps ap-authentication summary 820
show wps cids-sensor 821
show wps mfp 822
show wps shun-list 824
show wps signature detail 825
Cisco Wireless LAN Controller Command Reference, Release 8.0xxii OL-31334-01
Contents
-
show wps signature events 826
show wps signature summary 828
show wps summary 830
show wps wips statistics 832
show wps wips summary 833
config Commands 834
config 802.11b preamble 835
config aaa auth 836
config aaa auth mgmt 837
config acl apply 838
config acl counter 839
config acl create 840
config acl cpu 841
config acl delete 842
config acl layer2 843
config acl rule 845
config acl url-domain 847
config auth-list add 848
config auth-list ap-policy 849
config auth-list delete 850
config advanced eap 851
config advanced timers auth-timeout 853
config advanced timers eap-timeout 854
config advanced timers eap-identity-request-delay 855
config cts sxp 856
config database size 858
config dhcp opt-82 format 859
config dhcp opt-82 remote-id 860
config exclusionlist 862
config ldap 863
config local-auth active-timeout 866
config local-auth eap-profile 867
config local-auth method fast 870
config local-auth user-credentials 872
config ipv6 acl 873
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxiii
Contents
-
config netuser add 876
config netuser delete 878
config netuser description 879
config network bridging-shared-secret 880
config network web-auth captive-bypass 881
config network web-auth port 882
config network web-auth proxy-redirect 883
config network web-auth secureweb 884
config network webmode 885
config network web-auth 886
config policy 887
config radius acct 890
config radius acct ipsec authentication 893
config radius acct ipsec disable 894
config radius acct ipsec enable 895
config radius acct ipsec encryption 896
config radius acct ipsec ike 897
config radius acct mac-delimiter 898
config radius acct network 899
config radius acct realm 900
config radius acct retransmit-timeout 901
config radius auth 902
config radius auth IPsec authentication 904
config radius auth ipsec disable 905
config radius auth ipsec encryption 906
config radius auth ipsec ike 907
config radius auth keywrap 909
config radius auth mac-delimiter 910
config radius auth management 911
config radius auth mgmt-retransmit-timeout 912
config radius auth network 913
config radius auth realm 914
config radius auth retransmit-timeout 915
config radius auth rfc3576 916
config radius auth retransmit-timeout 917
Cisco Wireless LAN Controller Command Reference, Release 8.0xxiv OL-31334-01
Contents
-
config radius aggressive-failover disabled 918
config radius backward compatibility 919
config radius callStationIdCase 920
config radius callStationIdType 921
config radius dns 923
config radius fallback-test 925
config rogue adhoc 927
config rogue ap classify 930
config rogue ap friendly 932
config rogue ap rldp 934
config rogue ap ssid 936
config rogue ap timeout 938
config rogue auto-contain level 940
config rogue ap valid-client 942
config rogue client 944
config rogue containment 946
config rogue detection 947
config rogue detection client-threshold 949
config rogue detection min-rssi 950
config rogue detection monitor-ap 951
config rogue detection report-interval 953
config rogue detection security-level 954
config rogue detection transient-rogue-interval 955
config rogue rule 956
config rogue rule condition ap 960
config switchconfig fips-prerequisite 962
config switchconfig ucapl 963
config switchconfig wlancc 964
config tacacs acct 965
config tacacs athr 967
config tacacs athr mgmt-server-timeout 969
config tacacs auth 970
config tacacs auth mgmt-server-timeout 972
config tacacs dns 973
config wlan radius_server realm 975
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxv
Contents
-
config wlan security eap-params 976
config wps ap-authentication 978
config wps auto-immune 979
config wps cids-sensor 980
config wps client-exclusion 982
config wps mfp 984
config wps shun-list re-sync 985
config wps signature 986
config wps signature frequency 988
config wps signature interval 989
config wps signature mac-frequency 990
config wps signature quiet-time 991
config wps signature reset 992
clear Commands 993
clear acl counters 994
clear radius acct statistics 995
clear tacacs auth statistics 996
clear stats local-auth 997
clear stats radius 998
clear stats tacacs 1000
debug Commands 1001
debug 11w-pmf 1002
debug aaa 1003
debug aaa events 1004
debug aaa local-auth 1005
debug bcast 1007
debug cckm 1008
debug client 1009
debug cts sxp 1010
debug dns 1011
debug dot1x 1012
debug dtls 1013
debug nac 1014
debug policy 1015
debug pm 1016
Cisco Wireless LAN Controller Command Reference, Release 8.0xxvi OL-31334-01
Contents
-
debug web-auth 1018
debug wips 1019
debug wps sig 1020
debug wps mfp 1021
P A R T V WLAN Commands 1023
C H A P T E R 6 CLI Commands 1025
show Commands 1025
show advanced hotspot 1026
show avc statistics wlan 1027
show call-control ap 1029
show call-control client 1033
show client ccx client-capability 1034
show client ccx frame-data 1035
show client ccx last-response-status 1036
show client ccx last-test-status 1037
show client ccx log-response 1038
show client ccx manufacturer-info 1040
show client ccx operating-parameters 1041
show client ccx profiles 1042
show client ccx results 1044
show client ccx rm 1045
show client ccx stats-report 1047
show client detail 1048
show client location-calibration summary 1050
show client probing 1051
show client roam-history 1052
show client summary 1053
show client wlan 1055
show dhcp 1056
show dhcp proxy 1057
show dhcp timeout 1058
show guest-lan 1059
show ipv6 acl 1060
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxvii
Contents
-
show ipv6 acl detailed 1061
show ipv6 acl cpu 1062
show ipv6 neighbor-binding 1063
show ipv6 ra-guard 1067
show ipv6 route summary 1068
show ipv6 summary 1069
show macfilter 1070
show network summary 1071
show pmk-cache 1073
show remote-lan 1074
show rf-profile summary 1076
show rf-profile details 1077
show wlan 1078
config Commands 1082
config 802.11 dtpc 1083
config advanced hotspot 1084
config auto-configure voice 1086
config client ccx clear-reports 1089
config client ccx clear-results 1090
config client ccx default-gw-ping 1091
config client ccx dhcp-test 1092
config client ccx dns-ping 1093
config client ccx dns-resolve 1094
config client ccx get-client-capability 1095
config client ccx get-manufacturer-info 1096
config client ccx get-operating-parameters 1097
config client ccx get-profiles 1098
config client ccx log-request 1099
config client ccx send-message 1101
config client ccx stats-request 1104
config client ccx test-abort 1105
config client ccx test-association 1106
config client ccx test-dot1x 1107
config client ccx test-profile 1108
config client deauthenticate 1109
Cisco Wireless LAN Controller Command Reference, Release 8.0xxviii OL-31334-01
Contents
-
config ipv6 disable 1110
config ipv6 enable 1111
config ipv6 acl 1112
config ipv6 capwap 1115
config ipv6 interface 1117
config ipv6 multicast 1119
config ipv6 neighbor-binding 1120
config ipv6 na-mcast-fwd 1122
config ipv6 ns-mcast-fwd 1123
config ipv6 ra-guard 1124
config ipv6 route 1125
config remote-lan 1126
config remote-lan aaa-override 1127
config remote-lan acl 1128
config remote-lan create 1129
config remote-lan custom-web 1130
config remote-lan delete 1132
config remote-lan dhcp_server 1133
config remote-lan exclusionlist 1134
config remote-lan interface 1135
config remote-lan ldap 1136
config remote-lan mac-filtering 1137
config remote-lan max-associated-clients 1138
config remote-lan radius_server 1139
config remote-lan security 1141
config remote-lan session-timeout 1142
config remote-lan webauth-exclude 1143
config rf-profile band-select 1144
config rf-profile channel 1146
config rf-profile client-trap-threshold 1147
config rf-profile create 1148
config rf-profile coverage 1149
config rf-profile data-rates 1151
config rf-profile delete 1152
config rf-profile description 1153
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxix
Contents
-
config rf-profile load-balancing 1154
config rf-profile max-clients 1155
config rf-profile multicast data-rate 1156
config rf-profile out-of-box 1157
config rf-profile rx-sop threshold 1158
config rf-profile trap-threshold 1159
config rf-profile tx-power-control-thresh-v1 1160
config rf-profile tx-power-control-thresh-v2 1161
config rf-profile tx-power-max 1162
config rf-profile tx-power-min 1163
config watchlist add 1164
config watchlist delete 1165
config watchlist disable 1166
config watchlist enable 1167
config wlan 1168
config wlan 7920-support 1170
config wlan 802.11e 1171
config wlan aaa-override 1172
config wlan acl 1173
config wlan assisted-roaming 1174
config wlan avc 1175
config wlan apgroup 1176
config wlan apgroup qinq 1183
config wlan band-select allow 1185
config wlan broadcast-ssid 1186
config wlan call-snoop 1187
config wlan chd 1188
config wlan ccx aironet-ie 1189
config wlan channel-scan defer-priority 1190
config wlan channel-scan defer-time 1191
config wlan custom-web 1192
config wlan dhcp_server 1194
config wlan diag-channel 1195
config wlan dtim 1196
config wlan exclusionlist 1197
Cisco Wireless LAN Controller Command Reference, Release 8.0xxx OL-31334-01
Contents
-
config wlan flow 1198
config wlan flexconnect ap-auth 1199
config wlan flexconnect central-assoc 1200
config wlan flexconnect learn-ipaddr 1201
config wlan flexconnect local-switching 1202
config wlan flexconnect vlan-central-switching 1204
config wlan hotspot 1205
config wlan hotspot dot11u 1206
config wlan hotspot dot11u 3gpp-info 1207
config wlan hotspot dot11u auth-type 1208
config wlan hotspot dot11u disable 1209
config wlan hotspot dot11u domain 1210
config wlan hotspot dot11u enable 1211
config wlan hotspot dot11u hessid 1212
config wlan hotspot dot11u ipaddr-type 1213
config wlan hotspot dot11u nai-realm 1214
config wlan hotspot dot11u network-type 1217
config wlan hotspot dot11u roam-oi 1218
config wlan hotspot hs2 1219
config wlan hotspot msap 1222
config wlan interface 1223
config wlan ipv6 acl 1224
config wlan kts-cac 1225
config wlan layer2 acl 1226
config wlan learn-ipaddr-cswlan 1227
config wlan ldap 1228
config wlan load-balance 1229
config wlan mac-filtering 1230
config wlan max-associated-clients 1231
config wlan max-radio-clients 1232
config wlan mdns 1233
config wlan media-stream 1234
config wlan mfp 1235
config wlan mobility anchor 1236
config wlan mobility foreign-map 1237
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxxi
Contents
-
config wlan multicast buffer 1238
config wlan multicast interface 1239
config wlan nac 1240
config wlan override-rate-limit 1241
config wlan passive-client 1243
config wlan peer-blocking 1244
config wlan pmipv6 default-realm 1245
config wlan pmipv6 mobility-type 1246
config wlan pmipv6 profile_name 1247
config wlan policy 1248
config wlan profile 1249
config wlan profiling 1250
config wlan qos 1252
config wlan radio 1253
config wlan radius_server acct 1254
config wlan radius_server acct interim-update 1255
config wlan radius_server auth 1256
config wlan radius_server acct interim-update 1257
config wlan radius_server overwrite-interface 1258
config wlan roamed-voice-client re-anchor 1259
config wlan security 802.1X 1260
config wlan security ckip 1262
config wlan security cond-web-redir 1264
config wlan security eap-passthru 1265
config wlan security ft 1266
config wlan security ft over-the-ds 1267
config wlan security IPsec disable 1268
config wlan security IPsec enable 1269
config wlan security IPsec authentication 1270
config wlan security IPsec encryption 1271
config wlan security IPsec config 1272
config wlan security IPsec ike authentication 1273
config wlan security IPsec ike dh-group 1274
config wlan security IPsec ike lifetime 1275
config wlan security IPsec ike phase1 1276
Cisco Wireless LAN Controller Command Reference, Release 8.0xxxii OL-31334-01
Contents
-
config wlan security IPsec ike contivity 1277
config wlan security passthru 1278
config wlan security pmf 1279
config wlan security splash-page-web-redir 1281
config wlan security static-wep-key authentication 1282
config wlan security static-wep-key disable 1283
config wlan security static-wep-key enable 1284
config wlan security static-wep-key encryption 1285
config wlan security tkip 1286
config wlan security web-auth 1287
config wlan security web-passthrough acl 1289
config wlan security web-passthrough disable 1290
config wlan security web-passthrough email-input 1291
config wlan security web-passthrough enable 1292
config wlan security wpa akm 802.1x 1293
config wlan security wpa akm cckm 1294
config wlan security wpa akm ft 1295
config wlan security wpa akm pmf 1296
config wlan security wpa akm psk 1297
config wlan security wpa disable 1298
config wlan security wpa enable 1299
config wlan security wpa ciphers 1300
config wlan security wpa gtk-random 1301
config wlan security wpa wpa1 disable 1302
config wlan security wpa wpa1 enable 1303
config wlan security wpa wpa2 disable 1304
config wlan security wpa wpa2 enable 1305
config wlan security wpa wpa2 cache 1306
config wlan security wpa wpa2 cache sticky 1307
config wlan security wpa wpa2 ciphers 1308
config wlan sip-cac disassoc-client 1309
config wlan sip-cac send-486busy 1310
config wlan ssid 1311
config wlan static-ip tunneling 1312
config wlan session-timeout 1313
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxxiii
Contents
-
config wlan uapsd compliant client enable 1314
config wlan uapsd compliant-client disable 1315
config wlan user-idle-threshold 1316
config wlan usertimeout 1317
config wlan webauth-exclude 1318
config wlan wmm 1319
clear Commands 1319
clear ipv6 neighbor-binding 1320
debug Commands 1320
debug 11w-pmf 1322
debug call-control 1323
debug ccxdiag 1324
debug ccxrm 1325
debug ccxs69 1326
debug client 1327
debug dhcp 1328
debug dhcp service-port 1329
debug ft 1330
debug hotspot 1331
debug ipv6 1332
debug profiling 1334
debug wcp 1335
test Commands 1335
test pmk-cache delete 1336
P A R T V I Lightweight Access Point Commands 1337
C H A P T E R 7 CLI Commands 1339
show Commands 1339
show advanced backup-controller 1340
show advanced max-1x-sessions 1341
show advanced probe 1342
show advanced rate 1343
show advanced timers 1344
show ap auto-rf 1345
Cisco Wireless LAN Controller Command Reference, Release 8.0xxxiv OL-31334-01
Contents
-
show ap ccx rm 1347
show ap cdp 1348
show ap channel 1350
show ap config 1351
show ap config general 1357
show ap config global 1359
show ap core-dump 1360
show ap crash-file 1361
show ap data-plane 1362
show ap dtls-cipher-suite 1363
show ap ethernet tag 1364
show ap eventlog 1365
show ap image 1366
show ap inventory 1367
show ap join stats detailed 1368
show ap join stats summary 1369
show ap join stats summary all 1370
show ap led-state 1371
show ap led-flash 1372
show ap link-encryption 1373
show ap max-count summary 1374
show ap monitor-mode summary 1375
show ap packet-dump status 1376
show ap prefer-mode stats 1377
show ap retransmit 1378
show ap stats 1379
show ap summary 1382
show ap tcp-mss-adjust 1383
show ap wlan 1384
show auth-list 1385
show client ap 1386
show boot 1387
show call-control ap 1388
show country 1392
show country channels 1393
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxxv
Contents
-
show country supported 1394
show dtls connections 1396
show known ap 1397
show ipv6 ra-guard 1398
show msglog 1399
show network summary 1400
show redundancy summary 1402
show redundancy latency 1403
show redundancy interfaces 1404
show redundancy mobilitymac 1405
show redundancy peer-route summary 1406
show redundancy statistics 1407
show redundancy timers 1408
show watchlist 1409
capwap ap Commands 1410
capwap ap controller ip address 1411
capwap ap dot1x 1412
capwap ap hostname 1413
capwap ap ip address 1414
capwap ap ip default-gateway 1415
capwap ap log-server 1416
capwap ap mode 1417
capwap ap primary-base 1418
capwap ap primed-timer 1419
capwap ap secondary-base 1420
capwap ap tertiary-base 1421
lwapp ap controller ip address 1422
config Commands 1422
config 802.11-a antenna extAntGain 1423
config 802.11-a channel ap 1424
config 802.11-a txpower ap 1425
config 802.11 antenna diversity 1426
config 802.11 antenna extAntGain 1427
config 802.11 antenna mode 1428
config 802.11 antenna selection 1429
Cisco Wireless LAN Controller Command Reference, Release 8.0xxxvi OL-31334-01
Contents
-
config 802.11 beamforming 1430
config 802.11 disable 1432
config advanced 802.11 profile clients 1433
config advanced 802.11 profile customize 1434
config advanced 802.11 profile foreign 1435
config advanced 802.11 profile noise 1436
config advanced 802.11 profile throughput 1437
config advanced 802.11 profile utilization 1438
config advanced backup-controller primary 1439
config advanced backup-controller secondary 1440
config advanced client-handoff 1441
config advanced dot11-padding 1442
config advanced assoc-limit 1443
config advanced max-1x-sessions 1444
config advanced rate 1445
config advanced probe backoff 1446
config advanced probe filter 1447
config advanced probe limit 1448
config advanced timers 1449
config ap 1452
config ap autoconvert 1453
config ap bhrate 1454
config ap bridgegroupname 1455
config ap bridging 1456
config ap cdp 1457
config ap core-dump 1459
config ap crash-file clear-all 1460
config ap crash-file delete 1461
config ap crash-file get-crash-file 1462
config ap crash-file get-radio-core-dump 1463
config ap 802.1Xuser 1464
config ap 802.1Xuser delete 1465
config ap 802.1Xuser disable 1466
config ap dtls-cipher-suite 1467
config ap ethernet duplex 1468
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxxvii
Contents
-
config ap ethernet tag 1469
config ap group-name 1470
config ap hotspot 1471
config ap image predownload 1478
config ap image swap 1479
config ap led-state 1480
config ap link-encryption 1482
config ap link-latency 1483
config ap location 1484
config ap logging syslog level 1485
config ap max-count 1487
config ap mgmtuser add 1488
config ap mgmtuser delete 1490
config ap mode 1491
config ap monitor-mode 1493
config ap name 1494
config ap packet-dump 1495
config ap port 1498
config ap power injector 1499
config ap power pre-standard 1500
config ap preferred-mode 1501
config ap primary-base 1502
config ap priority 1504
config ap reporting-period 1505
config ap reset 1506
config ap retransmit interval 1507
config ap retransmit count 1508
config ap role 1509
config ap rst-button 1510
config ap secondary-base 1511
config ap sniff 1513
config ap ssh 1515
config ap static-ip 1516
config ap stats-timer 1518
config ap syslog host global 1519
Cisco Wireless LAN Controller Command Reference, Release 8.0xxxviii OL-31334-01
Contents
-
config ap syslog host specific 1520
config ap tcp-mss-adjust 1521
config ap telnet 1523
config ap tertiary-base 1524
config ap tftp-downgrade 1526
config ap username 1527
config ap venue 1528
config ap wlan 1532
config country 1533
config ipv6 ra-guard 1534
config known ap 1535
config network allow-old-bridge-aps 1536
config network ap-discovery 1537
config network ap-fallback 1538
config network ap-priority 1539
config network apple-talk 1540
config network bridging-shared-secret 1541
config network master-base 1542
config network oeap-600 dual-rlan-ports 1543
config network oeap-600 local-network 1544
config network otap-mode 1545
config network zero-config 1546
config redundancy interface address peer-service-port 1547
config redundancy mobilitymac 1548
config redundancy mode 1549
config redundancy peer-route 1550
config redundancy timer keep-alive-timer 1551
config redundancy timer peer-search-timer 1552
config redundancy unit 1553
redundancy force-switchover 1554
config slot 1555
config wgb vlan 1556
clear Commands 1556
clear ap config 1557
clear ap eventlog 1558
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xxxix
Contents
-
clear ap join stats 1559
clear ap tsm 1560
clear lwapp private-config 1561
debug Commands 1561
debug ap 1562
debug ap enable 1563
debug ap packet-dump 1564
debug ap show stats 1565
debug ap show stats video 1567
debug capwap 1568
debug group 1569
debug lwapp console cli 1570
debug rfac 1571
debug rmgr 1572
debug rsyncmgr 1573
debug service ap-monitor 1574
transfer upload peer-start 1575
Resetting the System Reboot Time 1575
reset system at 1576
reset system in 1577
reset system cancel 1578
reset system notify-time 1579
reset peer-system 1580
test Commands 1580
test ap 1581
test capwap 1582
P A R T V I I Mesh Access Point Commands 1585
C H A P T E R 8 CLI Commands 1587
show mesh Commands 1588
show mesh ap 1589
show mesh astools stats 1590
show mesh backhaul 1591
show mesh cac 1592
Cisco Wireless LAN Controller Command Reference, Release 8.0xl OL-31334-01
Contents
-
show mesh client-access 1594
show mesh config 1595
show mesh convergence 1596
show mesh env 1597
show mesh neigh 1598
show mesh path 1601
show mesh per-stats 1602
show mesh public-safety 1603
show mesh queue-stats 1604
show mesh security-stats 1605
show mesh stats 1607
config mesh Commands 1608
config mesh astools 1609
config mesh backhaul rate-adapt 1610
config mesh backhaul slot 1611
config mesh battery-state 1612
config mesh alarm 1613
config mesh client-access 1615
config mesh convergence 1617
config mesh ethernet-bridging vlan-transparent 1618
config mesh full-sector-dfs 1619
config mesh linkdata 1620
config mesh linktest 1623
config mesh lsc 1626
config mesh multicast 1627
config mesh parent preferred 1629
config mesh public-safety 1630
config mesh radius-server 1631
config mesh range 1632
config mesh secondary-backhaul 1633
config mesh security 1634
config mesh slot-bias 1635
config lsc mesh 1636
debug Commands 1636
debug mesh security 1637
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xli
Contents
-
debug mesh convergence 1638
P A R T V I I I Radio Resource Management Commands 1639
C H A P T E R 9 CLI Commands 1641
show Commands 1641
show 802.11 extended 1642
show advanced 802.11 channel 1643
show advanced 802.11 coverage 1644
show advanced 802.11 group 1645
show advanced 802.11 l2roam 1646
show advanced 802.11 logging 1647
show advanced 802.11 monitor 1648
show advanced 802.11 optimized roaming 1649
show advanced 802.11 profile 1650
show advanced 802.11 receiver 1651
show advanced 802.11 summary 1652
show advanced 802.11 txpower 1653
show advanced dot11-padding 1654
show client ccx rm 1655
show client location-calibration summary 1657
show wps ap-authentication summary 1658
config Commands 1658
config 802.11-a 1659
config 802.11-a antenna extAntGain 1660
config 802.11-a channel ap 1661
config 802.11-a txpower ap 1662
config 802.11-abgn 1663
config 802.11a 11acsupport 1664
config 802.11b 11gSupport 1665
config 802.11b preamble 1666
config 802.11h channelswitch 1667
config 802.11h powerconstraint 1668
config 802.11h setchannel 1669
config 802.11 11nsupport 1670
Cisco Wireless LAN Controller Command Reference, Release 8.0xlii OL-31334-01
Contents
-
config 802.11 11nsupport a-mpdu tx priority 1671
config 802.11 11nsupport a-mpdu tx scheduler 1673
config 802.11 11nsupport antenna 1674
config 802.11 11nsupport guard-interval 1675
config 802.11 11nsupport mcs tx 1676
config 802.11 11nsupport rifs 1678
config 802.11 antenna diversity 1679
config 802.11 antenna extAntGain 1680
config 802.11 antenna mode 1681
config 802.11 antenna selection 1682
config 802.11 channel 1683
config 802.11 channel ap 1685
config 802.11 chan_width 1686
config 802.11 rx-sop threshold 1688
config 802.11 txPower 1690
config advanced 802.11 7920VSIEConfig 1692
config advanced 802.11 channel add 1693
config advanced 802.11 channel cleanair-event 1694
config advanced 802.11 channel dca anchor-time 1695
config advanced 802.11 channel dca chan-width-11n 1696
config advanced 802.11 channel dca interval 1698
config advanced 802.11 channel dca min-metric 1699
config advanced 802.11 channel dca sensitivity 1700
config advanced 802.11 channel foreign 1702
config advanced 802.11 channel load 1703
config advanced 802.11 channel noise 1704
config advanced 802.11 channel outdoor-ap-dca 1705
config advanced 802.11 channel pda-prop 1706
config advanced 802.11 channel update 1707
config advanced 802.11 coverage 1708
config advanced 802.11 coverage exception global 1710
config advanced 802.11 coverage fail-rate 1712
config advanced 802.11 coverage level global 1714
config advanced 802.11 coverage packet-count 1716
config advanced 802.11 coverage rssi-threshold 1718
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xliii
Contents
-
config advanced 802.11 edca-parameters 1720
config advanced 802.11 factory 1722
config advanced 802.11 group-member 1723
config advanced 802.11 group-mode 1724
config advanced 802.11 logging channel 1725
config advanced 802.11 logging coverage 1726
config advanced 802.11 logging foreign 1727
config advanced 802.11 logging load 1728
config advanced 802.11 logging noise 1729
config advanced 802.11 logging performance 1730
config advanced 802.11 logging txpower 1731
config advanced 802.11 monitor channel-list 1732
config advanced 802.11 monitor coverage 1733
config advanced 802.11 monitor load 1734
config advanced 802.11 monitor mode 1735
config advanced 802.11 monitor ndp-type 1736
config advanced 802.11 monitor noise 1737
config advanced 802.11 monitor signal 1738
config advanced 802.11 optimized roaming 1739
config advanced 802.11 profile foreign 1741
config advanced 802.11 profile noise 1742
config advanced 802.11 profile throughput 1743
config advanced 802.11 profile utilization 1744
config advanced 802.11 receiver 1745
config advanced 802.11 tpc-version 1746
config advanced 802.11 tpcv1-thresh 1747
config advanced 802.11 tpcv2-intense 1748
config advanced 802.11 tpcv2-per-chan 1749
config advanced 802.11 tpcv2-thresh 1750
config advanced 802.11 txpower-update 1751
config advanced dot11-padding 1752
config client location-calibration 1753
config network rf-network-name 1754
Configuring 802.11k and Assisted Roaming 1754
config assisted-roaming 1755
Cisco Wireless LAN Controller Command Reference, Release 8.0xliv OL-31334-01
Contents
-
config wlan assisted-roaming 1756
show assisted-roaming 1757
debug 11k 1758
debug Commands 1758
debug airewave-director 1760
debug dot11 1762
P A R T I X CleanAir Commands 1765
C H A P T E R 1 0 CLI Commands 1767
show Commands 1767
show 802.11 cleanair 1768
show 802.11 cleanair air-quality summary 1770
show 802.11 cleanair air-quality worst 1771
show 802.11 cleanair device ap 1772
show 802.11 cleanair device type 1773
show advanced 802.11 channel 1775
show ap auto-rf 1776
config Commands 1777
config 802.11 cleanair 1778
config 802.11 cleanair device 1780
config 802.11 cleanair alarm 1782
config advanced 802.11 channel cleanair-event 1784
config advanced 802.11 channel pda-prop 1785
config advanced 802.11 channel update 1786
test Commands 1786
test cleanair show 1787
P A R T X FlexConnect Commands 1789
C H A P T E R 1 1 CLI Commands 1791
show Commands 1791
show capwap reap association 1792
show capwap reap status 1793
show flexconnect acl detailed 1794
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xlv
Contents
-
show flexconnect acl summary 1795
show flexconnect group detail 1796
show flexconnect group summary 1797
show flexconnect office-extend 1798
config Commands 1798
config ap autoconvert 1799
config ap flexconnect bridge 1800
config ap flexconnect central-dhcp 1801
config ap flexconnect local-split 1803
config ap flexconnect policy 1804
config ap flexconnect radius auth set 1805
config ap flexconnect vlan 1806
config ap flexconnect vlan add 1807
config ap flexconnect vlan native 1808
config ap flexconnect vlan wlan 1809
config ap flexconnect web-auth 1810
config ap flexconnect web-policy acl 1811
config ap flexconnect wlan 1812
config flexconnect acl 1813
config flexconnect acl rule 1814
config flexconnect arp-cache 1816
config flexconnect fallback-radio-shut 1817
config flexconnect group 1818
config flexconnect group vlan 1824
config flexconnect group flexgroup dhcp overridden-interface enable 1825
config flexconnect group web-auth 1826
config flexconnect group web-policy 1827
config flexconnect join min-latency 1828
config flexconnect office-extend 1829
config wlan flexconnect ap-auth 1831
config wlan flexconnect learn-ipaddr 1832
config wlan flexconnect local-switching 1833
config wlan flexconnect vlan-central-switching 1835
Integrated Management Module Commands in Cisco Flex 7500 Series Controllers 1835
imm address 1836
Cisco Wireless LAN Controller Command Reference, Release 8.0xlvi OL-31334-01
Contents
-
imm dhcp 1837
imm mode 1838
imm restart 1839
imm summary 1840
imm username 1841
debug Commands 1841
debug capwap reap 1842
debug dot11 mgmt interface 1843
debug dot11 mgmt msg 1844
debug dot11 mgmt ssid 1845
debug dot11 mgmt state-machine 1846
debug dot11 mgmt station 1847
debug flexconnect aaa 1848
debug flexconnect acl 1849
debug flexconnect cckm 1850
debug flexconnect group 1851
debug pem 1852
P A R T X I Mobility Commands 1853
C H A P T E R 1 2 CLI Commands 1855
show Commands 1855
show advanced client-handoff 1856
show l2tp 1857
show logging 1858
show mobility anchor 1860
show mobility ap-list 1861
show mobility foreign-map 1862
show mobility group member 1863
show mobility oracle 1864
show mobility statistics 1866
show mobility summary 1867
show pmipv6 domain 1869
show pmipv6 mag bindings 1870
show pmipv6 mag globals 1871
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xlvii
Contents
-
show pmipv6 mag stats 1872
show pmipv6 profile summary 1874
config Commands 1874
config mobility dscp 1875
config mobility group anchor 1876
config mobility group domain 1877
config mobility group keepalive count 1878
config mobility group keepalive interval 1879
config mobility group member 1880
config mobility group multicast-address 1882
config mobility multicast-mode 1883
config mobility new-architecture 1884
config mobility oracle 1885
config mobility switchPeerGroup 1886
config mobility secure-mode 1887
config mobility statistics reset 1888
config pmipv6 domain 1889
config pmipv6 add profile 1890
config pmipv6 delete 1892
config pmipv6 mag apn 1893
config pmipv6 mag binding init-retx-time 1894
config pmipv6 mag binding lifetime 1895
config pmipv6 mag binding max-retx-time 1896
config pmipv6 mag binding maximum 1897
config pmipv6 mag binding refresh-time 1898
config pmipv6 mag bri delay 1899
config pmipv6 mag bri retries 1900
config pmipv6 mag lma 1901
config pmipv6 mag replay-protection 1902
config wlan mobility anchor 1903
config wlan mobility foreign-map 1904
config wlan pmipv6 default-realm 1905
config wlan pmipv6 mobility-type 1906
config wlan pmipv6 profile_name 1907
clear, debug and ping Commands 1907
Cisco Wireless LAN Controller Command Reference, Release 8.0xlviii OL-31334-01
Contents
-
clear stats mobility 1908
cping 1909
debug dot11 1910
debug client 1912
debug fmchs 1913
debug mobility 1914
eping 1916
mping 1917
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 xlix
Contents
-
Cisco Wireless LAN Controller Command Reference, Release 8.0l OL-31334-01
Contents
-
Preface
This preface describes the audience, organization, and conventions of the Cisco Wireless LAN ControllerCommand Reference Guide. It also provides information on how to obtain other documentation. This chapterincludes the following sections:
Audience, page li
Document Organization, page li
Document Conventions, page li
Related Documentation, page liv
Obtaining Documentation and Submitting a Service Request, page liv
AudienceThis publication is for experienced network administrators who configure and maintain Cisco wireless LANcontrollers and Cisco lightweight access points.
Document OrganizationThis document is organized into the following chapters:
DescriptionChapter
Describes how to use the command-line interface (CLI) on the controller.Overview
Provides detailed information about the CLI commands for the controller.CLI Commands
Document ConventionsThis document uses the following conventions:
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 li
-
IndicationConvention
Commands and keywords and user-entered text appear in bold font.bold font
Document titles, new or emphasized terms, and arguments for which you supplyvalues are in italic font.
italic font
Elements in square brackets are optional.[ ]
Required alternative keywords are grouped in braces and separated by verticalbars.
{x | y | z }
Optional alternative keywords are grouped in brackets and separated by verticalbars.
[ x | y | z ]
A nonquoted set of characters. Do not use quotation marks around the string orthe string will include the quotation marks.
string
Terminal sessions and information the system displays appear in courier font.courier font
Nonprinting characters such as passwords are in angle brackets.
Default responses to system prompts are in square brackets.[]
An exclamation point (!) or a pound sign (#) at the beginning of a line of codeindicates a comment line.
!, #
Means reader take note. Notes contain helpful suggestions or references to material not covered in themanual.
Note
Means the following information will help you solve a problem.Tip
Means reader be careful. In this situation, you might perform an action that could result in equipmentdamage or loss of data.
Caution
This warning symbol means danger. You are in a situation that could cause bodily injury. Before youwork on any equipment, be aware of the hazards involved with electrical circuitry and be familiar withstandard practices for preventing accidents. (To see translations of the warnings that appear in thispublication, refer to the appendix "Translated Safety Warnings.")
Warning
Cisco Wireless LAN Controller Command Reference, Release 8.0lii OL-31334-01
PrefaceDocument Conventions
-
DescriptionWarning Title
Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie dielichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken,dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico'sen dient u op de hoogte te zijn van standaard maatregelen om ongelukken tevoorkomen. (Voor vertalingen van de waarschuwingen die in deze publicatieverschijnen, kunt u het aanhangsel "Translated Safety Warnings" (Vertalingenvan veiligheidsvoorschriften) raadplegen.)
Waarschuwing
Tm varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaaruumiinvammaan. Ennen kuin tyskentelet minkn laitteiston parissa, ota selvshkkytkentihin liittyvist vaaroista ja tavanomaisista onnettomuuksienehkisykeinoista. (Tss julkaisussa esiintyvien varoitusten knnkset lydtliitteest "Translated Safety Warnings" (knnetyt turvallisuutta koskevatvaroitukset).)
Varoitus
Ce symbole d'avertissement indique un danger. Vous vous trouvez dans unesituation pouvant entraner des blessures. Avant d'accder cet quipement,soyez conscient des dangers poss par les circuits lectriques et familiarisez-vousavec les procdures courantes de prvention des accidents. Pour obtenir lestraductions des mises en garde figurant dans cette publication, veuillez consulterl'annexe intitule Translated SafetyWarnings (Traduction des avis de scurit).
Attention
Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, diezu einer Krperverletzung fhren knnte. Bevor Siemit der Arbeit an irgendeinemGert beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenenGefahren und der Standardpraktiken zur Vermeidung von Unfllen bewut.(bersetzungen der in dieser Verffentlichung enthaltenenWarnhinweise findenSie im Anhang mit dem Titel "Translated Safety Warnings" (bersetzung derWarnhinweise).)
Warnung
Questo simbolo di avvertenza indica un pericolo. Si in una situazione che pucausare infortuni. Prima di lavorare su qualsiasi apparecchiatura, occorreconoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratichestandard per la prevenzione di incidenti. La traduzione delle avvertenze riportatein questa pubblicazione si trova nell'appendice, "Translated Safety Warnings"(Traduzione delle avvertenze di sicurezza).
Avvertenza
Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan fre tilpersonskade. Fr du utfrer arbeid p utstyr, m du vre oppmerksom p defaremomentene som elektriske kretser innebrer, samt gjre deg kjent med vanligpraksis nr det gjelder unng ulykker. (Hvis du vil se oversettelser av deadvarslene som finnes i denne publikasjonen, kan du se i vedlegget "TranslatedSafety Warnings" [Oversatte sikkerhetsadvarsler].)
Advarsel
Este smbolo de aviso indica perigo. Encontra-se numa situao que lhe podercausar danos fisicos. Antes de comear a trabalhar com qualquer equipamento,familiarize-se com os perigos relacionados com circuitos elctricos, e comquaisquer prticas comuns que possam prevenir possveis acidentes. (Para veras tradues dos avisos que constam desta publicao, consulte o apndice"Translated Safety Warnings" - "Tradues dos Avisos de Segurana").
Aviso
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 liii
PrefaceDocument Conventions
-
DescriptionWarning Title
Este smbolo de aviso significa peligro. Existe riesgo para su integridad fsica.Antes de manipular cualquier equipo, considerar los riesgos que entraa lacorriente elctrica y familiarizarse con los procedimientos estndar de prevencinde accidentes. (Para ver traducciones de las advertencias que aparecen en estapublicacin, consultar el apndice titulado "Translated Safety Warnings.")
Advertencia!
Denna varningssymbol signalerar fara. Du befinner dig i en situation som kanleda till personskada. Innan du utfr arbete p ngon utrustning mste du varamedveten om farorna med elkretsar och knna till vanligt frfarande fr attfrebygga skador. (Se frklaringar av de varningar som frekommer i dennapublikation i appendix "Translated Safety Warnings" [versattaskerhetsvarningar].)
Varning
Related DocumentationThese documents provide complete information about the Cisco Unified Wireless Network solution:
Cisco Wireless LAN Controller Configuration Guide
Cisco Wireless LAN Controller System Message Guide
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points
Obtaining Documentation and Submitting a Service RequestFor information about obtaining documentation, submitting a service request, and gathering additionalinformation, see the monthlyWhat's New in Cisco Product Documentation, which also lists all new and revisedCisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to theWhat's New in Cisco Product Documentation as an RSS feed and set content to be delivereddirectly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supportsRSS Version 2.0.
Cisco Wireless LAN Controller Command Reference, Release 8.0liv OL-31334-01
PrefaceRelated Documentation
-
Using the Command-Line Interface
This chapter contains the following topics:
CLI Command Keyboard Shortcuts, page 1
Using the Interactive Help Feature, page 2
CLI Command Keyboard ShortcutsThe table below lists the CLI keyboard shortcuts to help you enter and edit command lines on the controller.
Table 1: CLI Command Keyboard Shortcuts
Keyboard ShortcutDescriptionAction
Esc IThe word at the cursor to lowercase.Change
Esc uThe word at the cursor to uppercase.
Ctrl-h, Delete, or BackspaceA character to the left of the cursor.Delete
Ctrl-uAll characters from the cursor to the beginning of theline.
Ctrl-kAll characters from the cursor to the end of the line.
Esc dAll characters from the cursor to the end of the word.
Ctrl-w or Esc BackspaceThe word to the left of the cursor.
q, Q, or Ctrl-CExit from MORE output.Display MOREoutput
SpacebarNext additional screen. The default is one screen. Todisplay more than one screen, enter a number beforepressing the Spacebar key.
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 1
-
Keyboard ShortcutDescriptionAction
EnterNext line. The default is one line. To display more thanone line, enter the number before pressing the Enterkey.
Ctrl-mEnter an Enter or Return key character.
Ctrl-t or TabExpand the command or abbreviation.
Ctrl-b or Left ArrowOne character to the left (back).Move the cursor
Ctrl-f or Right ArrowOne character to the right (forward).
Esc bOne word to the left (back), to the beginning of thecurrent or previous word.
Esc fOne word to the right (forward), to the end of thecurrent or next word.
Ctrl-aTo the beginning of the line.
Ctrl-eTo the end of the line.
Ctrl-l or Ctrl-rRedraw the screen at the prompt.
Ctrl-zReturn to the EXEC mode from any configuration mode
exit commandReturn to the previous mode or exit from the CLI from Exec mode.
Ctrl-tTranspose a character at the cursor with a character to the left of the cursor.
Using the Interactive Help FeatureThe question mark (?) character allows you to get the following type of help about the command at thecommand line. The table below lists the interactive help feature list.
Table 2: Interactive Help Feature List
Command
Provides a brief description of the Help feature in any command mode.help
Lists all commands available for a particular command mode.? at the commandprompt
Provides a list of commands that begin with the character string.partial command?
Cisco Wireless LAN Controller Command Reference, Release 8.02 OL-31334-01
Using the Command-Line InterfaceUsing the Interactive Help Feature
-
Command
Completes a partial command name.partialcommand
Lists the keywords, arguments, or both associated with a command.command ?
Lists the arguments that are associated with the keyword.command keyword ?
Using the help Command
Before You Begin
To look up keyboard commands, use the help command at the root level.
help
Help may be requested at any point in a command by entering a question mark ?. If nothing matches, thehelp list will be empty and you must back up until entering a ? shows the available options. Two types ofhelp are available:
1 Full help is available when you are ready to enter a command argument (for example show ?) and describeseach possible argument.
2 Partial help is provided when an abbreviated argument is entered and you want to know what argumentsmatch the input (for example show pr?).
Example:
> helpHELP:Special keys:DEL, BS... delete previous characterCtrl-A .... go to beginning of lineCtrl-E .... go to end of lineCtrl-F .... go forward one characterCtrl-B .... go backward one characterCtrl-D .... delete current characterCtrl-U, X. delete to beginning of lineCtrl-K .... delete to end of lineCtrl-W .... delete previous wordCtrl-T .... transpose previous characterCtrl-P .... go to previous line in history bufferCtrl-N .... go to next line in history bufferCtrl-Z .... return to root command promptTab, command-line completionExit .... go to next lower command prompt? .... list choices
Using the ? command
Before You Begin
To display all of the commands in your current level of the command tree, or to display more informationabout a particular command, use the ? command.
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 3
Using the Command-Line InterfaceUsing the help Command
-
command name ?
When you enter a command information request, put a space between the command name and ?.
Examples This command shows you all the commands and levels available from the root level.
> ?clear Clear selected configuration elements.config Configure switch options and settings.debug Manages system debug options.help Helplinktest Perform a link test to a specified MAC address.logout Exit this session. Any unsaved changes are lost.ping Send ICMP echo packets to a specified IP address.reset Reset options.save Save switch configurations.show Display switch options and settings.transfer Transfer a file to or from the switch.
Using the partial? command
Before You Begin
To provide a list of commands that begin with the character string, use the partial command ?.
partial command?
There should be no space between the command and the question mark.
This example shows how to provide a command that begin with the character string ad:
> controller> config>ad?
The command that matches with the string ad is as follows:
advanced
Using the partial command
Before You Begin
To completes a partial command name, use the partial command command.
partial command
There should be no space between the command and .
This example shows how to complete a partial command name that begin with the character string ad:
Controller >config>cert certificate
Cisco Wireless LAN Controller Command Reference, Release 8.04 OL-31334-01
Using the Command-Line InterfaceUsing the partial? command
-
Using the command ?
Examples To list the keywords, arguments, or both associated with the command, use the command ?.command-name ?
There should be a space between the command and the question mark.
This example shows how to list the arguments and keyword for the command acl:
Controller >config acl ?
Information similar to the following appears:
apply Applies the ACL to the data path.counter Start/Stop the ACL Counters.create Create a new ACL.delete Delete an ACL.rule Configure rules in the ACL.cpu Configure the CPU Acl Information
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 5
Using the Command-Line InterfaceUsing the command ?
-
command keyword ?To list the arguments that are associated with the keyword, use the command keyword ?:
command keyword ?
There should be space between the keyword and the question mark.
This example shows how to display the arguments associated with the keyword cpu:
Controller >config acl cpu ?
Information similar to the following appears:
none None - Disable the CPU ACL - Name of the CPU ACL
Cisco Wireless LAN Controller Command Reference, Release 8.06 OL-31334-01
Using the Command-Line Interfacecommand keyword ?
-
P A R T ISystem Management Commands CLI Commands, page 9
-
CLI Commands
The Cisco Wireless LAN solution command-line interface (CLI) enables operators to connect an ASCIIconsole to the Cisco wireless LAN controller and configure the controller and its associated access points.
show Commands, page 9
config Commands, page 146
Timeout Commands, page 446
Clearing Configurations, Log files, and Other Actions, page 473
Resetting the System Reboot Time, page 508
Uploading and Downloading Files and Configurations, page 513
Installing and Modifying Licenses on Cisco 5500 Series Controllers, page 539
Right to Use Licensing Commands, page 546
Troubleshooting the Controller Settings, page 554
show CommandsThis section lists the show commands that you can use to display information about the controller settingsand user accounts.
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 9
-
show 802.11 cu-metricsTo display access point channel utilization metrics, use the show 802.11 cu-metrics command.
show 802.11{a | b} cu-metrics cisco_ap
Syntax Description Specifies the 802.11a network.a
Specifies the 802.11b/g network.b
Access point name.cisco_ap
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show 802.11a cu-metrics command:
(Cisco Controller) > show 802.11a cu-metrics AP1AP Interface Mac: 30:37:a6:c8:8a:50Measurement Duration: 90secTimestamp Thu Jan 27 09:08:48 2011Channel Utilization stats================Picc (50th Percentile)...................... 0Pib (50th Percentile)....................... 76Picc (90th Percentile)...................... 0Pib (90th Percentile)....................... 77
Timestamp Thu Jan 27 09:34:34 2011
Cisco Wireless LAN Controller Command Reference, Release 8.010 OL-31334-01
show Commands
-
show advanced 802.11 l2roamTo display 802.11a or 802.11b/g Layer 2 client roaming information, use the show advanced 802.11 l2roamcommand.
show advanced 802.11{a | b} l2roam {rf-param | statistics} mac_address}
Syntax Description Specifies the 802.11a network.a
Specifies the 802.11b/g network.b
Specifies the Layer 2 frequency parameters.rf-param
Specifies the Layer 2 client roaming statistics.statistics
MAC address of the client.mac_address
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show advanced 802.11b l2roam rf-param command:
(Cisco Controller) > show advanced 802.11b l2roam rf-param
L2Roam 802.11bg RF Parameters.....................Config Mode.................................. DefaultMinimum RSSI................................. -85Roam Hysteresis.............................. 2Scan Threshold............................... -72Transition time.............................. 5
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 11
show Commands
-
show advanced send-disassoc-on-handoffTo display whether the WLAN controller disassociates clients after a handoff, use the show advancedsend-disassoc-on-handoff command.
show advanced send-disassoc-on-handoff
Syntax Description This command has no arguments or keywords.
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show advanced send-disassoc-on-handoff command:
(Cisco Controller) > show advanced send-disassoc-on-handoffSend Disassociate on Handoff..................... Disabled
Cisco Wireless LAN Controller Command Reference, Release 8.012 OL-31334-01
show Commands
-
show advanced sip-preferred-call-noTo display the list of preferred call numbers, use the show advanced sip-preferred-call-no command.
show advanced sip-preferred-call-no
Syntax Description This command has no arguments or keywords.
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show advanced sip-preferred-call-no command:
(Cisco Controller) > show advanced sip-preferred-call-noPreferred Call Numbers ListCall Index Preferred Call No----------- ------------------1 9112 1003 1014 1025 1036 104
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 13
show Commands
-
show advanced sip-snooping-portsTo display the port range for call snooping, use the show advanced sip-snooping-ports command.
show advanced sip-snooping-ports
Syntax Description This command has no arguments or keywords.
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show advanced sip-snooping-ports command:
(Cisco Controller) > show advanced sip-snooping-portsSIP Call Snoop Ports: 1000 - 2000
Cisco Wireless LAN Controller Command Reference, Release 8.014 OL-31334-01
show Commands
-
show arp kernelTo display the kernel Address Resolution Protocol (ARP) cache information, use the show arp kernelcommand.
show arp kernel
Syntax Description This command has no arguments or keywords.
Command Default None
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show arp kernel command:
(Cisco Controller) > show arp kernelIP address HW type Flags HW address Mask Device192.0.2.1 0x1 0x2 00:1A:6C:2A:09:C2 * dtl0192.0.2.8 0x1 0x6 00:1E:E5:E6:DB:56 * dtl0
Cisco Wireless LAN Controller Command Reference, Release 8.0 OL-31334-01 15
show Commands
-
show arp switchTo display the Cisco wireless LAN controller MAC addresses, IP addresses, and port types, use the show arpswitch command.
show arp switch
Syntax Description This command has no arguments or keywords.
Command History ModificationRelease
This command was introduced in a release earlier than Release 7.6.7.6
Examples The following is a sample output of the show arp switch command:
(Cisco Controller) > show arp switchMAC Address IP Address Port VLAN Type------------------- ---------------- ------------ ---- -------------------xx:xx:xx:xx:xx:xx xxx.xxx.xxx.xxx service port 1xx:xx:xx:xx:xx:xx xxx.xxx.xxx.xxx service portxx:xx:xx:xx:xx:xx xxx.xxx.xxx.xxx service port
Cisco Wireless LAN Controller Command Reference, Release 8.016 OL-31334-01
show Commands
-
show avc applicationsTo display all the supported Application Visibility and Control (AVC) applications, use the show avcapplications command.
show avc applications
Syntax Description This command has no arguments or keywords.
Command Default None
Command History ModificationRelease
This command was introduced.7.4
Usage Guidelines AVC uses the Network-Base