chemical / fluid compatibility tables pumps - fluid compatibility... · 2017-12-20 · added...

49
CHEMICAL / FLUID COMPATIBILITY TABLES Rev 122017

Upload: others

Post on 17-Apr-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

CHEMICAL / FLUID COMPATIBILITY TABLES Rev 122017

Page 2: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

WETTED COMPONENTS REFERENCE FOR COMPATIBILITY TABLES Rev. 122017

1500 PUMP SERIES – 1.5” Components that are in contact with the pumped fluid (wetted components) are as follows: Housing (Aluminum) – Items 7, 12, 39 Engineered Resin (Proprietary Formula) – Items 9, 10, 11 Engineered Resin (PPS) – Items 33, 36 O-Rings (Viton, Nitrile) – Items 8 (Nitrile), 35, 40 Shaft Lip Seals (Viton) – Items 6, 13 Pump Shafts and Bypass Spring – Items 21, 34, 22

Page 3: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

WETTED COMPONENTS REFERENCE FOR COMPATIBILITY TABLES Rev. 122017

2000 PUMP SERIES – 2.0” Components that are in contact with the pumped fluid (wetted components) are as follows: Housing (Aluminum) – Items 7, 12, 39 Engineered Resin (Proprietary Formula) – Items 9, 10, 11 Engineered Resin (PPS) – Items 33, 36 O-Rings (Viton, Nitrile) – Items 8 (Nitrile), 35, 40 Shaft Lip Seals (Viton) – Items 6, 13 Pump Shafts and Bypass Spring – Items 21, 34, 22

Page 4: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

A-A-52624 - - - - - - Acetylene A A A A A A

A-A-59290 - - - - - - Acetylene Tetrabromide - - - - D D

Abietic Acid - - - - - - Acetylene Tetrachloride - - - - D D

Acetaldehyde B D A A D C Acetylsalicylic Acid - - - - B B

Acetamide A - - A C A Acids, Non-organic - - - - - -

Acetanilide - - - - C C Acids, Organic - - - - - -

Acetate Solvent A D - A D C Aconitic Acid - - - - - -

Acetic Acid B D A A B C Acridine - - - - - -

Acetic Acid, 20% B D A - B B Acrolein - - - - C C

Acetic Acid, 30% - - - - - - Acrylic Acid - - - - B B

Acetic Acid, 5% - - - - B B Acrylonitrile B1 A A – C D

Acetic Acid, 80% B D A - B C Adipic Acid A B - – A2 A

Acetic Acid, Glacial B D - A B B Aero Lubriplate - - - - A A

Acetic Acid, Hot, High Pressure - - - - D D Aero Shell 17 Grease - - - - A A

Acetic Anhydride A1 D - A D C Aero Shell 560 - - - - - -

Acetoacetic Acid - - - - C C Aero Shell 750 - - - - B B

Acetone A B A A D D Aero Shell 7A Grease ( MIL-G-23827) - - - - B B

Acetone Cyanohydrin - - - - C C Aero Shell IAC - - - - A A

Acetonitrile (Methyl Cyanide) - - - - C C Aerosafe 2300 - - - - D D

Acetophenetidine - - - - B B Aerosafe 2300W - - - - D D

Acetophenone - - - - D D Aerozene 50 (50% Hydrazine 50% UDMH) - - - - C C

Acetotoluidide - - - - B B Alcohols - Alkyl - - - - A A

Acetyl Acetone - - - - D D Alcohols - Amyl B B A A B B

Acetyl Bromide - - - – A D Alcohols - Benzyl B B A A D D

Acetyl Chloride - - - - D D Alcohols - Butyl B B A A A A

Acetyl Chloride (dry) D A - A D D Alcohols - Butyl (Secondary) - - - - B B

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 5: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Alcohols - Butyl (Tertiary) - - - - B B Alkyl Benzene - - - - B B

Alcohols - Cetyl - - - - A A Alkyl Chloride - - - - B B

Alcohols - Cinnamic - - - - B B Alkyl Lithium - - - - - -

Alcohols - Denatured - - - - A A Alkyl Sulfide* - - - - B B

Alcohols - Diacetone A1 A - – D D Alkylnaphthalene Sulfonic Acid - - - - A A

Alcohols - Ethyl B B A – C C Allyl Chloride - - - - B B

Alcohols - Furfuryl - - - - D D Allylidene Diacetate - - - - C C

Alcohols - Hexyl A A - – A A Alpha Picoline - - - - C C

Alcohols - Hydroabietyl - - - - - - Aluminum Acetate - - - - B B

Alcohols - Isobutyl B B - – B B Aluminum Bromide - - - - A A

Alcohols - Isopropyl B A A – B B Aluminum Chlorate - - - - C C

Alcohols - Methyl A1 A A A D D Aluminum Chloride D A A A A A

Alcohols - Octyl A - - – B B Aluminum Chloride 20% D - A A A A

Alcohols - Oleyl - - - - - - Aluminum Ethylate - - - - - -

Alcohols - Phenylethyl - - - - - - Aluminum Fluoride B1 D - A A A

Alcohols - Propyl A A A A A A Aluminum Fluorosilicate* - - - - - -

Alcohols - Thioamyl - - - - A A Aluminum Formate - - - - C C

Aliphatic Dicarboxylic Acid - - - - B B Aluminum Hydroxide B1 - - – B B

Alkanes (Paraffin Hydrocarbons) - - - - A A Aluminum Linoleate - - - - A A

Alkanesulfonic Acid - - - - A A Aluminum Nitrate D D - – A A

Alkazene - - - - D D Aluminum Oxalate - - - - C C

Alkenes (Olefin Hydrocarbons) - - - - B B Aluminum Phosphate - - - - A A

Alkyl Acetone - - - - C C Aluminum Potassium Sulfate - - - - C C

Alkyl Amine - - - - A A Aluminum Potassium Sulfate 10% C C A – A A

Alkyl Aryl Sulfonates - - - - A A Aluminum Potassium Sulfate 100% C D A – A A

Alkyl Aryl Sulfonics - - - - A A Aluminum Salts - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 6: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Aluminum Sodium Sulfate - - - - C C Ammonium Carbamate - - - - C C

Aluminum Sulfate B1 D A A A A Ammonium Carbonate B B - A A D

Alums A - - – A A Ammonium Caseinate - - - – – –

Ambrex 33 (Mobil) - - - - A A Ammonium Chloride B1 D - A A A

Ambrex 830 (Mobil) - - - - A A Ammonium Citrate - - - - C C

Amines B B A B D D Ammonium Dichromate - - - - C C

Aminoanthraquinone - - - - - - Ammonium Diphosphate - - - - C C

Aminoazobenzene - - - - - - Ammonium Fluoride - - - - A A

Aminobenzene Sulfonic Acid - - - - - - Ammonium Fluorosilicate* - - - - - -

Aminobenzoic Acid - - - - - - Ammonium Formate - - - - C C

Aminopyridine - - - - - - Ammonium Hydroxide B2 D A A A A

Aminosalicylic Acid - - - - - - Ammonium Hydroxide, Concentrated - - - - D D

Ammonia 10% A2 - A A1 D A Ammonium Iodide - - - - A A

Ammonia and Lithium Metal in Solution - - - - B B Ammonium Lactate - - - - C C

Ammonia Nitrate C - - A D C Ammonium Metaphosphate - - - - C C

Ammonia, anhydrous A1 B A A1 B B Ammonium Molybdenate* - - - - C C

Ammonia, Gas, Cold - - - - A A Ammonium Nitrate B1 D A A A A

Ammonia, Gas, Hot - - - - D D Ammonium Nitrite - - - - A A

Ammonia, liquid A A B A1 B B Ammonium Oxalate - - - – C C

Ammonium Acetate A - - – C C Ammonium Perchlorate - - - - C C

Ammonium Arsenate - - - - C C Ammonium Perchloride - - - - - -

Ammonium Benzoate - - - - C C Ammonium Persulfate D D - – D D

Ammonium Bicarbonate - - - - C C Ammonium Persulfate 10% - - - - D D

Ammonium Bifluoride B D - – A B Ammonium Phosphate - - - - A A

Ammonium Bisulfite - - - - C C Ammonium Phosphate, Dibasic B1 D - A A A

Ammonium Bromide - - - - A A Ammonium Phosphate, Monobasic B - - – A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 7: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Ammonium Phosphate, Tribasic B - - – A A Amyl Nitrate - - - - C C

Ammonium Phosphite - - - - C C Amyl Nitrite - - - - C C

Ammonium Picrate - - - - C C Amyl Phenol - - - - - -

Ammonium Polysulfide - - - - C C Amyl Propionate - - - - A A

Ammonium Salicylate - - - - C C Anderol, L- 826 (di-ester) - - - - B B

Ammonium Salts - - - - A A Anderol, L- 829 (di-ester) - - - - B B

Ammonium Sulfamate - - - - C C Anderol, L-774 (di-ester) - - - - B B

Ammonium Sulfate A1 D - A D A ANG-25 (Di-ester Base) (TG749) - - - - B B

Ammonium Sulfate Nitrate - - - - A A ANG-25 (Glyceral Ester) - - - - B B

Ammonium Sulfide - - - - A A Aniline C A A A C D

Ammonium Sulfite D D - – C C Aniline Dyes - - - - D D

Ammonium Thiocyanate - - - - C C Aniline Hydrochloride D D - – B B

Ammonium Thioglycolate - - - - C C Aniline Sulfate - - - - C C

Ammonium Thiosulfate - - - – C C Aniline Sulfite - - - - C C

Ammonium Tungstate - - - - C C Animal Fats - - - - A A

Ammonium Valerate - - - - C C Anisole - - - - - -

Amyl Acetate A C A A D A Anisoyl Chloride - - - - - -

Amyl Alcohol B B A A B B AN-O-3 Grade M - - - - A A

Amyl Borate - - - - A A AN-O-366 - - - - A A

Amyl Butyrate - - - - A A AN-O-6 - - - - A A

Amyl Chloride - A - – A - Ansul Ether 161 or 181 - - - - C C

Amyl Chloronaphthalene - - - - D D Anthracene - - - - B B

Amyl Cinnamic Aldehyde - - - - B B Anthranilic Acid - - - - - -

Amyl Laurate - - - - B B Anthraquinone - - - - - -

Amyl Mercaptan - - - - B B Antifreeze A - A – C C

Amyl Naphthalene - - - - D D Antimony Chloride - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 8: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Antimony Pentachloride - - - - A A Aspartic Acid - - - - C C

Antimony Pentafluoride - - - - - - Asphalt A B A A A B

Antimony Sulfate - - - - - - ATL-857 - - - - B B

Antimony Tribromide - - - - A A Atlantic Dominion F - - - - A A

Antimony Trichloride D D A – A A Atlantic Utro Gear-e - - - - A A

Antimony Trifluoride - - - - A A Atlantic Utro Gear-EP Lube - - - - A A

Antimony Trioxide - - - - A A Aure 903R (Mobil) - - - - A A

AN-VV-O-366b Hydr. Fluid - - - - A A AUREX 256 - - - - - -

Aqua Regia (80% HCl, 20% HNO3) D D D D D D Automatic Transmission Fluid - - - - A A

Arachidic Acid - - - - - - Automotive Brake Fluid - - - - C C

Argon - - - - A A AXAREL 9100 - - - - - -

Armor All - - - - - - Azobenzene - - - - - -

Aroclor 1248 A - A - C C Bardol B - - - - D D

Aroclor, 1254 - - - - D D Barium Carbonate D - - A2 C C

Aroclor, 1260 - - - - A A Barium Chlorate - - - - C C

Aromatic Hydrocarbons A - A – A D Barium Chloride D C A A A A

Arsenic Acid D D - A A A Barium Cyanide C1 B - – A A

Arsenic Oxide - - - - - - Barium Hydroxide D A - A A A

Arsenic Salts - - - – A – Barium Iodide - - - - A A

Arsenic Trichloride - - - - A A Barium Nitrate B C - – C C

Arsenic Trioxide - - - - A A Barium Oxide - - - - A A

Arsenic Trisulfide - - - - A A Barium Peroxide - - - - C C

Arsenites - - - - - - Barium Polysulfide - - - - C C

Arsine - - - - - - Barium Salts - - - - A A

Aryl Orthosilicate - - - - - - Barium Sulfate B A - A A A

Ascorbic Acid - - - - C C Barium Sulfide D D A – A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 9: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Bayol 35 - - - - A A Benzotrifluoride - - - - D D

Bayol D - - - - A A Benzoyl Chloride - - - - - -

Beer A C A A2 A A Benzoyl Peroxide - - - - - -

Beet Sugar Liquids A B - – A A Benzoylsulfonilic Acid - - - - B B

Beet Sugar Liquors - - - - A A Benzyl Acetate - - - - C C

Benzaldehyde B B A A D D Benzyl Amine - - - - - -

Benzaldehyde Disulfonic Acid - - - - - - Benzyl Benzoate - - - - D D

Benzamide - - - - B B Benzyl Bromide - - - - D D

Benzanthrone - - - - B B Benzyl Butyl Phthalate - - - - C C

Benzene B A A A A D Benzyl Chloride D D - – A D

Benzene Hexachloride - - - - - - Benzyl Phenol - - - - B B

Benzene Sulfonic Acid D D D A D D Benzyl Salicylate - - - - B B

Benzidine - - - - B B Beryllium Chloride - - - - A A

Benzidine 3 Sulfonic Acid - - - - B B Beryllium Fluoride - - - - A A

Benzil - - - - B B Beryllium Oxide - - - - A A

Benzilic Acid - - - - B B Beryllium Sulfate - - - - C C

Benzine (Ligroin) - - - - A A Bismuth Carbonate - - - - C C

Benzocatechol - - - - B B Bismuth Nitrate - - - - C C

Benzochloride - - - - D D Bismuth Oxychloride - - - - C C

Benzoic Acid B D A A1 A D Bittern - - - - - -

Benzoin - - - - B B Black Liquor - - - - B B

Benzol B1 B - A A D Black Point 77 - - - - A A

Benzonitrile - - - – C C Blast Furnace Gas - - - - D D

Benzophenone - - - - - - Bleach Solutions - - - - - -

Benzoquinone - - - - - - Bleaching Liquors - - - – C C

Benzotrichloride - - - - D D Blood - - - - B B

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 10: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Borax (Sodium Borate) B1 A A A B B Brewery Slop - - - – A A

Borax Solutions - - - - - - Brine - - - - A A

Bordeaux Mixture - - - - B B Brine (Seawater) - - - - A A

Boric Acid D D A A A A Brom - 113 - - - - C C

Boric Oxide - - - - C C Brom - 114 - - - - B B

Borneol - - - - B B Bromic Acid - - - - C C

Bornyl Acetate - - - - B B Bromine D D D D A D

Bornyl Chloride - - - - B B Bromine Pentafluoride - - - - D D

Bornyl Formate - - - - B B Bromine Trifluoride - - - - D D

Boron Fluids (HEF) - - - - B B Bromine Water - - - - D D

Boron Hydride - - - - - - Bromobenzene - - - - D D

Boron Phosphate - - - - - - Bromobenzene Cyanide - - - - C C

Boron Tribromide - - - - - - Bromochlorotrifluoroethane (Halothane) - - - - D D

Boron Trichloride - - - - - - Bromoform - - - - B B

Boron Trifluoride - - - - - - Bromomethane (Methyl Bromide) - - - - B B

Boron Trioxide - - - - - - Bromotrifluoroethylene (BFE) - - - - - -

Brake Fluid DOT 3 (Glycol Type) - - - - C C Bromotrifluoromethane (F-13B1) - - - - - -

Brake Fluid DOT 4 - - - - C C Bronze Plating: - Bronze Plating: - Cu-Cd Bronze Bath R.T. A - - – A A

Brake Fluid DOT 5 - - - - B B Bronze Plating: - Bronze Plating: - Cu-Sn Bronze Bath 160°F A - - – A A

Brass Plating - High-Speed Brass Bath 110°F A - - – A A Bronze Plating: - Bronze Plating: - Cu-Zn Bronze Bath 100°F A - - – A A

Brass Plating - Regular Brass Bath 100°F A - - – A A Brucine Sulfate - - - - C C

Bray GG-130 - - - - B B Buffered Oxide Etchants - - - - - -

Brayco 719-R (VV-H-910) - - - - C C Butadiene A A - A1 D D

Brayco 885 (MIL-L-6085A) - - - - B B Butane A A A A A A

Brayco 910 - - - - B B Butane, 2, 2-Dimethyl - - - - A A

Bret 710 - - - - B B Butane, 2, 3-Dimethyl - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 11: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Butanedial - - - - C C Butyl Phthalate B2 D A A C1 D

Butanol (Butyl Alcohol) B B A A A A Butyl Stearate - - - - B B

Butene 2-Ethyl (1-Butene 2-Ethyl) - - - - A A Butylacetate A A A A D D

Butter A - - – A A Butylbenzoic Acid - - - - B B

Butter-Animal Fat - - - - A A Butylene A A A A A B

Buttermilk A D - – A A Butyraldehyde - - - - D D

Butyl Acetyl Ricinoleate - - - - B B Butyric Acid B D A A B D

Butyl Acrylate - - - - D D Butyric Anhydride - - - - C C

Butyl Amine A2 A A D A A Butyrolacetone - - - - C C

Butyl Benzoate - - - - C C Butyryl Chloride - - - - B B

Butyl Benzoate or n-Butyl Benzoate - - - - D D Cadmium Chloride - - - - C C

Butyl Benzolate - - - - - - Cadmium Cyanide - - - - C C

Butyl Butyrate or n-Butyl Butyrate - - - - D D Cadmium Nitrate - - - - C C

Butyl Carbitol - - - - D D Cadmium Oxide - - - - C C

Butyl Cellosolve - - - - C C Cadmium Plating: - Cyanide Bath 90°F A - - – A A

Butyl Cellosolve Acetate - - - - C C Cadmium Plating: - Fluoborate Bath 100°F A - - – A B

Butyl Cellosolve Adipate - - - - D D Cadmium Sulfate - - - - C C

Butyl Chloride - - - - A A Cadmium Sulfide - - - - C C

Butyl Ether A1 A - A2 C C Calcine Liquors - - - - A A

Butyl Glycolate - - - - C C Calcium Acetate - - - - B B

Butyl Lactate - - - - C C Calcium Arsenate - - - - C C

Butyl Laurate - - - - C C Calcium Benzoate - - - - B B

Butyl Mercaptan (Tertiary) - - - - D D Calcium Bicarbonate - - - - C C

Butyl Methacrylate - - - - C C Calcium Bisulfate - - - – – A

Butyl Oleate - - - - D D Calcium Bisulfide C - A – C C

Butyl Oxalate - - - - C C Calcium Bisulfite D D - A B B

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 12: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Calcium Bromide - - - - A A Calcium Pyridine Sulfonate - - - - - -

Calcium Carbide - - - - - - Calcium Salts - - - - A A

Calcium Carbonate D B A – A A Calcium Silicate - - - - A A

Calcium Chlorate - - - – C C Calcium Stearate - - - - B B

Calcium Chloride (30% in water) D - A A A A Calcium Sulfamate - - - - B B

Calcium Chromate - - - - C C Calcium Sulfate C B A A C C

Calcium Cyanamide - - - - - - Calcium Sulfide - - - - A A

Calcium Cyanide - - - - A A Calcium Sulfite - - - - A A

Calcium Fluoride - - - - A A Calcium Thiocyanate - - - - C C

Calcium Gluconate - - - - C C Calcium Thiosulfate - - - - B B

Calcium Hydride - - - - A A Calcium Tungstate - - - - C C

Calcium Hydrosulfide - - - - C C Calgon - - A – A A

Calcium Hydroxide C1 B A A A A Caliche Liquors - - - - A A

Calcium Hypochlorite D D A A A B Camphene - - - - B B

Calcium Hypophosphite - - - - C C Camphor - - - - B B

Calcium Lactate - - - - C C Camphoric Acid - - - - B B

Calcium Naphthenate - - - - - - Cane Juice B - - – A A

Calcium Nitrate B1 B A A A A Capric Acid - - - - A A

Calcium Oxalate - - - - C C Caproic Acid - - - - A A

Calcium Oxide C - A A A A Caproic Aldehyde - - - - - -

Calcium Permanganate - - - - - - Caprolactam - - - - A A

Calcium Peroxide - - - - - - Capronaldehyde - - - - A A

Calcium Phenolsulfonate - - - - C C Carbamate - - - - C C

Calcium Phosphate - - - - A A Carbazole - - - - - -

Calcium Phosphate Acid - - - - C C Carbitol - - - - B B

Calcium Propionate - - - - C C Carbolic Acid (Phenol) A - D A A D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 13: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Carbon Bisulfide B - D – A D Cellulose Nitrate* - - - - C C

Carbon Dioxide (dry) B1 A A A A A Cellulose Tripropionate - - - - C C

Carbon Dioxide (Explosive Decompression Use) - - - - A A Cellulube (Phosphate Esters) - - - - - -

Carbon Dioxide (wet) A1 C B A B A Cellutherm 2505A - - - - B B

Carbon Disulfide A B D A A D Cerium Sulfate - - - - C C

Carbon Fluorides - - - - B B Cerous Chloride - - - - C C

Carbon Monoxide A A B – A A Cerous Fluoride - - - - C C

Carbon Tetrabromide - - - - - - Cerous Nitrate - - - - C C

Carbon Tetrachloride D - A A A B Cesium Formate - - - - - -

Carbon Tetrachloride (dry) D A - A2 A2 C1 Cetane (Hexadecane) - - - - A A

Carbon Tetrachloride (wet) D B - A2 – D Chaulmoogric Acid - - - - - -

Carbon Tetrafluoride - - - - B B Chloral - - - - C C

Carbonated Water A - - – A A Chloramine - - - - - -

Carbonic Acid B1 D A A A B Chloranthraquinone - - - - B B

Casein - - - - C C Chlordane - - - - B B

Catsup D - A – A A Chlorextol - - - - B B

Caustic Lime - - - - C C Chloric Acid D D - – C C

Caustic Potash - - - - C C Chlorinated Glue - - - – A B

Caustic Soda (Sodium Hydroxide) - - - - C C Chlorinated Solvents, Dry - - - - D D

Cellosolve - - - - D D Chlorinated Solvents, Wet - - - - D D

Cellosolve, Acetate - - - - D D Chlorine (Dry) - - - D B B

Cellosolve, Butyl - - - - D D Chlorine (dry) C1 B A D A B

Celluguard - - - - A A Chlorine (Plasma) - - - - - -

Cellulose Acetate - - - - C C Chlorine (Wet) - - - - - -

Cellulose Acetate Butyrate - - - - C C Chlorine Dioxide - - - - D D

Cellulose Ether - - - - C C Chlorine Dioxide, 8% Cl as NaClO2 in solution - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 14: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Chlorine Trifluoride - - - - D D Chloroethylbenzene - - - - B B

Chlorine Water D D D D C C Chloroform B1 B A A A D

Chlorine, Anhydrous Liquid D D D D A D Chlorohydrin - - - - C C

Chloro 1-Nitro Ethane (1-Chloro 1-Nitro Ethane) - - - - D D Chloronaphthalene or o-Chloronaphthalene - - - - D D

Chloro Oxyfluorides - - - - - - Chloronitrobenzene - - - - C C

Chloro Xylenols - - - - B B Chlorophenol or o-Chlorophenol - - - - D D

Chloroacetaldehyde - - - - C C Chloropicrin - - - - B B

Chloroacetic Acid D D A A D D Chloroprene - - - - B B

Chloroacetone - - - - D D Chlorosilanes - - - - - -

Chloroacetyl Chloride - - - - - - Chlorosulfonic Acid C D A D D D

Chloroamino Benzoic Acid - - - - C C Chlorotoluene - - - - D D

Chloroaniline - - - - C C Chlorotoluene Sulfonic Acid - - - - C C

Chlorobenzaldehyde - - - - C C Chlorotoluidine - - - - B B

Chlorobenzene - - - - D D Chlorotrifluoroethylene (CTFE) - - - - - -

Chlorobenzene (Mono) A B A A A D Chlorox - - - - B B

Chlorobenzene Chloride - - - - B B Chloroxylols - - - - - -

Chlorobenzene Trifluoride - - - - B B Chocolate Syrup A - - – A A

Chlorobenzochloride - - - - B B Cholesterol - - - - B B

Chlorobenzotrifluoride - - - - B B Chrome Alum - - - - A A

Chlorobromomethane - - - – D D Chrome Plating Solutions - - - - D D

Chlorobromopropane - - - - B B Chromic Acid 10% D D D A B D

Chlorobutadiene - - - - D D Chromic Acid 30% D D A B A D

Chlorobutane (Butyl Chloride) - - - - A A Chromic Acid 5% C D A A D D

Chlorododecane - - - - D D Chromic Acid 50% D D D A1 A D

Chloroethane - - - - A A Chromic Chloride - - - - - -

Chloroethane Sulfonic Acid - - - - C C Chromic Fluorides - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 15: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Chromic Hydroxide - - - - - - Cobaltous Naphthenate - - - - - -

Chromic Nitrates - - - - - - Cobaltous Sulfate - - - - C C

Chromic Oxide - - - - D D Codeine - - - - B B

Chromic Phosphate - - - - - - Coffee A - - – A A

Chromic Sulfate - - - - - - Coke Oven Gas - - - - D D

Chromium Plating: - Barrel Chrome Bath 95°F A - - – C D Coliche Liquors - - - - B B

Chromium Plating: - BlacFluosilicate Bath 95°F A - - – C D Convelex 10 - - - - D D

Chromium Plating: - Black Chrome Bath 115°F A - - – C D Coolanol 20 25R 35R 40& 45A (Monsanto) - - - - A A

Chromium Plating: - Chromic-Sulfuric Bath 130°F A - - – C D Copper Acetate - - - - B B

Chromium Plating: - Fluoride Bath 130°F A - - – C D Copper Ammonium Acetate - - - - C C

Chromium Potassium Sulfate (Alum) - - - - B B Copper Carbonate - - - - C C

Chromium Salts - - - – – – Copper Chloride - - A A A A

Chromyl Chlorides - - - - - - Copper Cyanide D - A A A A

Cider B - - – A A Copper Fluoborate - - - – A B

Cinnamic Acid - - - - B B Copper Gluconate - - - - C C

Cinnamic Aldehyde - - - - B B Copper Naphthenate - - - - - -

Citric Acid C D A A A A Copper Nitrate D D A A A B

City Service #65 #120 #250 - - - - A A Copper Oxide - - - - A A

City Service Pacemaker #2 - - - - A A Copper Plating (Acid): Copper Fluoborate Bath 120°F A - - – A B

Clorox® (Bleach) A D B D B B Copper Plating (Acid): Copper Sulfate Bath R.T. A - - – A A

Coal Tar - - - - A A Copper Plating (Cyanide): - Copper Strike Bath 120°F - - - – A A

Cobalt Chloride - - - - A A Copper Plating (Cyanide): - High-Speed Bath 180°F A - - – A A

Cobalt Chloride, 2N - - - - A A Copper Plating (Cyanide): - Rochelle Salt Bath 150°F A - - – A A

Cobaltous Acetate - - - - C C Copper Plating (Misc): Copper (Electroless) A - - – A D

Cobaltous Bromide - - - - A A Copper Plating (Misc): Copper Pyrophosphate A - - – A A

Cobaltous Linoleate - - - - - - Copper Salts - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 16: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Copper Sulfate >5% D D A A A A Cyclohexanone A A A A D D

Copper Sulfate 10% - - - - A A Cyclohexene - - - - B B

Copper Sulfate 5% D D A A A A Cyclohexylamine - - - - A A

Copper Sulfate 50% - - - - A A Cyclohexylamine Carbonate - - - - - -

Cream A - - – A A Cyclohexylamine Laurate - - - - A A

Creosote, Coal Tar - - - - A A Cyclopentadiene - - - - B B

Creosote, Wood - - - - A A Cyclopentane - - - - A A

Cresol (Methyl Phenol) - - - - - - Cyclopolyolefins - - - - A A

Cresols A A A A B D Cymene or p-Cymene - - - - D D

Cresylic Acid B2 B A – A D DDT (Dichlorodiphenyltrichloroethane) - - - - B B

Crotonaldehyde - - - - B B Decalin - - - - D D

Crotonic Acid - - - - B B Decane - - - - A A

Cumaldehyde - - - - B B Delco Brake Fluid - - - - C C

Cumene - - - - D D Detergents B A A A A A

Cumene Hydroperoxide - - - - - - Developing Fluids (Photo) - - - - A A

Cupric Acid D - - A A2 B2 Dexron - - - - A A

Cupric Sulfate - - - - B B Dextrin - - - - A A

Cyanamide - - - - - - Dextro Lactic Acid - - - - C C

Cyanic Acid - - - – A C Dextron - - - - A A

Cyanides - - - - - - Dextrose - - - - C C

Cyanogen Chloride - - - - - - DF200 - - - - - -

Cyanogen Gas - - - - - - DI Water - - - - B B

Cyanohydrin - - - - - - Diacetone - - - - D D

Cyanuric Chloride - - - - - - Diacetone Alcohol A1 A - – D D

Cyclohexane A A A A A A Dialkyl Sulfates - - - - C C

Cyclohexanol - - - - A A Diallyl Ether - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 17: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Diallyl Phthalate - - - - - - Dichloroisopropyl Ether - - - - D D

Diamylamine - - - - A A Dichloromethane - - - - B B

Diazinon - - - - C C Dichlorophenol - - - - B B

Dibenzyl (sym-Diphenylethane) - - - - B B Dichlorophenoxyacetic Acid - - - - B B

Dibenzyl Ether - - - - D D Dichloropropane - - - - B B

Dibenzyl Sebacate - - - - D D Dichloropropene - - - - B B

Diborane - - - - - - Dichlorosilane - - - - - -

Dibromoethane - - - - B B Dicyclohexylamine - - - - A A

Dibromoethyl Benzene - - - - D D Dicyclohexylammonium Nitrate - - - - C C

Dibutyl Cellosolve Adipate - - - - C C Dicyclopentadiene - - - - - -

Dibutyl Ether - - - - D D Dieldrin - - - - B B

Dibutyl Methylenedithio Glycolate - - - - B B Di-ester Lubricant MIL-L-7808 - - - - B B

Dibutyl Phthalate - - - - D D Di-ester Synthetic Lubricants - - - - B B

Dibutyl Sebacate - - - - D D Diethanolamine (DEA) - - - - C C

Dibutyl Thioglycolate - - - - B B Diethyl Benzene - - - - - -

Dibutyl Thiourea - - - - B B Diethyl Carbonate - - - - C C

Dibutylamine - - - - D D Diethyl Ether B B A A D D

Dichloroacetic Acid - - - - B B Diethyl Phthalate - - - - B B

Dichloroaniline - - - - C C Diethyl Sebacate - - - - B B

Dichlorobenzene B1 B A – D D Diethyl Sulfate - - - - D D

Dichlorobutane - - - - B B Diethylamine B D A – D B

Dichlorobutene - - - - B B Diethylaniline - - - - C C

Dichlorodiphenyl-Dichloroethane (DDD) - - - - B B Diethylene Glycol B1 A - – A A

Dichloroethane B1 D A – A B Diethylene Glycol B - - - - - -

Dichloroethylene - - - - B B Diethylenetriamine - - - - - -

Dichlorohydrin - - - - C C Difluorodibromomethane - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 18: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Difluoroethane - - - - B B Dimethylaniline (Xylidine) - - - - B B

Difluoromonochloroethane - - - - B B Dimethyldisulfide (DMDS) - - - - A A

Diglycol Chloroformate - - - - C C Dimethylhydrazine - - - - C C

Diglycolamine - - - - - - Dinitrochlorobenzene - - - - B B

Diglycolic Acid - - - - C C Dinitrogen Tetroxide - - - - - -

Dihydroxydiphenylsulfone - - - - C C Dinitrotoluene (DNT) - - - - D D

Diisobutyl Ketone - - - - - - Dioctyl Phthalate - - - - D D

Diisobutylcarbinol - - - - A A Dioctyl Sebacate - - - - D D

Diisobutylene - - - - B B Dioctylamine - - - - A A

Diisooctyl Sebacate - - - - C C Dioxane - - - - D D

Diisopropyl Ether (DIPE) - - - - - - Dioxolane - - - - D D

Diisopropyl Ketone - - - - D D Dipentene - - - - B B

Diisopropylbenzene - - - - B B Diphenyl B2 B - – A D

Diisopropylidene Acetone - - - - B B Diphenyl Oxide B1 B - A D D

Dimethoxyethane (DME) - - - - - - Diphenylamine (DPA) - - - - B B

Dimethyl Acetamide - - - - C C Diphenylene Oxide - - - - - -

Dimethyl Aniline A2 - - A D D Diphenylpropane - - - - B B

Dimethyl Ether - - - - A A Disilane - - - - - -

Dimethyl Formaldehyde - - - - C C Di-Tert-Butyl Peroxide - - - - - -

Dimethyl Formamide A1 D A A B B D-Limonene - - - - - -

Dimethyl Phenyl Carbinol - - - - B B Dodecylbenzene - - - - B B

Dimethyl Phenyl Methanol - - - - B B Dow Chemical 50-4 - - - - - -

Dimethyl Phthalate - - - - D D Dow Chemical ET378 - - - - D D

Dimethyl Sulfoxide (DMSO) - - - - C C Dow Chemical ET588 - - - - C C

Dimethyl Terephthalate (DMT) - - - - B B Dow Corning -11 - - - - B B

Dimethylamine (DMA) - - - - B B Dow Corning 1208, 4050, 6620, F-60, XF-60 - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 19: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Dow Corning -1265 Fluorosilicone Fluid - - - - B B Epichlorohydrin - - - - D D

Dow Corning -200 - - - - B B Epoxy Resins - - - - - -

Dow Corning -220 - - - - A A Epsom Salts (Magnesium Sulfate) B1 B A A A A

Dow Corning -3 - - - - B B Erucic Acid - - - - - -

Dow Corning -33 - - - - B B Esam-6 Fluid - - - - - -

Dow Corning -4 - - - - B B Esso Golden Gasoline - - - - B B

Dow Corning -44 - - - - B B Esso Transmission Fluid (Type A) - - - - A A

Dow Corning -5 - - - - B B Esso WS2812 (MIL-L-7808A) - - - - A A

Dow Corning -510 - - - - B B Esso XP90-EP Lubricant - - - - A A

Dow Corning -55 - - - - B B Esstic 42, 43 - - - - A A

Dow Corning -550 - - - - B B Ethane - - B – A A

Dow Corning -704 - - - - B B Ethanol B B A – C C

Dow Corning -705 - - - - B B Ethanolamine B B - A B B

Dow Corning -710 - - - - B B Ether B1 B A A D D

Dow Corning F-61 - - - - A A Ethoxyethyl Acetate (EGMEEA) - - - - C C

Dow Guard - - - - A A Ethyl Acetate A2 B A A D D

Dowanol P Mix - - - - - - Ethyl Acetoacetate - - - - D D

Dowtherm, 209 - - - - C C Ethyl Acrylate - - - - D D

Dowtherm, A - - - - D D Ethyl Ammonium Dichloride - - - - - -

Dowtherm, E - - - - D D Ethyl Benzene - - - - D D

Drinking Water - - - - A A Ethyl Benzoate - - - – A D

Dry Cleaning Fluids - - - - C C Ethyl Bromide - - - - B B

DTE 20 Series, Mobil - - - - B B Ethyl Cellosolve - - - - D D

DTE named series, Mobil, light-heavy - - - - A A Ethyl Cellulose - - - - B B

Dyes B - - – A – Ethyl Chloride B D A A A A

Elco 28-EP lubricant - - - - A A Ethyl Chlorocarbonate - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 20: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Ethyl Chloroformate - - - - D D Ethylene Glycol A B A A A A

Ethyl Ether B1 B - A D C Ethylene Hydrochloride - - - - D D

Ethyl Formate - - - - D D Ethylene Oxide D C A D D D

Ethyl Hexanol - - - - A A Ethylene Oxide, (12%) and Freon 12 (80%) - - - - C C

Ethyl Lactate - - - - C C Ethylene Trichloride - - - - D D

Ethyl Mercaptan - - - - D D Ethyleneimine - - - - - -

Ethyl Nitrite - - - - C C Ethylmorpholene Stannous Octotate (50/50 mixture) - - - - D D

Ethyl Oxalate - - - - D D Ethylmorpholine - - - - B B

Ethyl Pentachlorobenzene - - - - D D Ethylsulfuric Acid - - - - C C

Ethyl Pyridine - - - - B B F-60 Fluid (Dow Corning) - - - - A A

Ethyl Silicate - - - - A A F-61 Fluid (Dow Corning) - - - - A A

Ethyl Stearate - - - - B B Fatty Acids A C A – A B

Ethyl Sulfate - - - – D A FC-43 Heptacosofluorotri-butylamine - - - - A A

Ethyl Tertiary Butyl Ether - - - - - - FC75 & FC77 (Fluorocarbon) - - - - A A

Ethyl Valerate - - - - B B Ferric Acetate - - - - C C

Ethylacrylic Acid - - - - D D Ferric Ammonium Sulfate - - - - C C

Ethylamine - - - - C C Ferric Chloride D D B A A A

Ethylcyclopentane - - - - A A Ferric Ferrocyanide - - - - C C

Ethylene - - - - C C Ferric Hydroxide - - - - C C

Ethylene Bromide B B - – A D Ferric Nitrate D D A A A A

Ethylene Chloride B D A A B D Ferric Persulfate - - - - A A

Ethylene Chlorohydrin B B A – A D Ferric Sulfate D D A A A A

Ethylene Cyanohydrin - - - - B B Ferrous Ammonium Citrate - - - - C C

Ethylene Diamine B1 D A A D A Ferrous Ammonium Sulfate - - - - C C

Ethylene Dibromide - - - - D D Ferrous Carbonate - - - - C C

Ethylene Dichloride A1 A A A A D Ferrous Chloride - D A A A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 21: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Ferrous Iodide - - - - C C Freon, 115, 116 - - - - A A

Ferrous Sulfate B1 D A A C C Freon, 12 and Suniso 4G (50/50 Mixture) - - - - B B

Ferrous Tartrate - - - - C C Freon, 123 (Dichlorotrifluoroethane) - - - - - -

Fisher Reagent - - - - - - Freon, 124 (Chlorotetrafluoroethane) - - - - - -

Fluoboric Acid D - - A B A Freon, 125 (Pentafluoroethane) - - - - - -

Fluorinated Cyclic Ethers - - - - - - Freon, 13 (Chlorotrifluoromethane) - - - - A A

Fluorine A D D D D D Freon, 134a (Tetrafluoroethane) - - - - A A

Fluorine (Gas) - - - - - - Freon, 13B1 (Bromotrifluoromethane) - - - - A A

Fluorobenzene - - - - B B Freon, 14 (Tetrafluoromethane) - - - - A A

Fluoroboric Acid - - - - A A Freon, 141b (Dichlorofluoroethane) - - - - - -

Fluoroform (Trifluoromethane) - - - - - - Freon, 142b (Chlorotrifluorothane) - - - - B B

Fluorolube - - - - A A Freon, 152a (Difluoroethane) - - - - - -

Fluorophosphoric Acid - - - - - - Freon, 21 - - - - D D

Fluorosulfonic Acid - - - - - - Freon, 218 - - - - A A

Fluosilicic Acid D D - A A A Freon, 23 (Fluoroform) (Trifluoromethane) - - - - - -

Formaldehyde 100% A D A B C C Freon, 31 - - - - D D

Formaldehyde 40% B D A A C C Freon, 32 - - - - A A

Formamide - - - - C C Freon, 356mcf - - - - - -

Formic Acid - D C A D C Freon, 401a - - - - - -

Freon 113 - - A A A A Freon, 402a - - - - - -

Freon 12 B1 D A A B B Freon, 404a - - - - - -

Freon 22 D D A A D D Freon, 407c - - - - - -

Freon TF D - A D A A Freon, 410a - - - - - -

Freon, 112 (Tetrachlorodifluoroethane) - - - - B B Freon, 410c - - - - - -

Freon, 114 (Dichlorotetrafluroethane) - - - - A A Freon, 502 - - - - B B

Freon, 114B2 - - - - B B FUEL - Jet Fuel (JP3, JP4, JP5, JP8) A A A - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 22: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Freon, BF (R112) - - - - B B FUEL - Jet Fuel A - - - - B B

Freon, C316 - - - - A A FUEL - Kerosene A A A - A A

Freon, C318 - - - - A A FUEL - MIL-S-3136, Type I Fuel - - - - A A

Freon, K-142b - - - - A A FUEL - MIL-S-3136, Type II Fuel - - - - B B

Freon, K-152a - - - - A A FUEL - MIL-S-3136, Type III Fuel - - - - B B

Freon, MF (R11) - - - - B B FUEL - OIL - Bunker’s “C” (Fuel Oil) - - - - A A

Freon, PCA (R113) - - - - A A FUEL - Oils-Diesel Fuel (20, 30, 40, 50) A A A - A A

Freon, TA - - - - A A FUEL - Oils-Fuel (1, 2, 3, 5A, 5B, 6) C1 A A - B B

Freon, TC - - - - A A FUEL - SR-10 Fuel - - - - A A

Freon, TMC - - - - B B FUEL - SR-6 Fuel - - - - B B

Freon, T-P35 - - - - A A FUEL - Type I Fuel (MIL-S-3136)(ASTM Ref. Fuel A) - - - - A A

Freon, T-WD602 - - - - B B FUEL - Type II Fuel MIL-S-3136 - - - - B B

Freon® 11 D D A A D D FUEL - Type III Fuel MIL-S-3136(ASTM Ref. Fuel B) - - - - B B

Fruit Juice A - A – A A Fumaric Acid - - - - A A

FUEL - Aromatic Fuel -50% - - - - B B Fuming Sulphuric Acid (20/25% Oleum) - - - - D D

FUEL - ASTM Reference Fuel A - - - - A A Furaldehyde - - - - D D

FUEL - ASTM Reference Fuel B - - - - A A Furan (Furfuran) - - - - D D

FUEL - ASTM Reference Fuel C - - - - B B Furan Resin A A - A D D

FUEL - ASTM Reference Fuel D - - - - B B Furfural A1 B - A D D

FUEL - Diesel Fuel A1 A A - A A Furfuraldehyde - - - - D D

FUEL - Esso Fuel 208 - - - - A A Furoic Acid - - - - - -

FUEL - Fuel Oil, #6 - - - - B B Furyl Carbinol - - - - D D

FUEL - Fuel Oil, 1, and 2 - - - - A A Fyrquel 150 220 300 550 - - - - D D

FUEL - Fuel Oil, Acidic - - - - A A Fyrquel 90, 100, 500 - - - - D D

FUEL - Fuel Oils C1 A A - B B Fyrquel A60 - - - - D D

FUEL - HEF-2 (High Energy Fuel) - - - - B B Fyrquel EHC - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 23: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Galden - - - - - - Gold Plating: - Acid 75°F - - - – A A

Gallic Acid D D - A A B Gold Plating: - Cyanide 150°F - - - – A A

Gasoline (high-aromatic) D - - A A A Gold Plating: - Neutral 75°F - - - – A A

Gasoline, leaded, ref. A B A A A A Grape Juice - - - – A A

Gasoline, unleaded A2 B - A A A Grease - - - – A A

Gelatin A D A – A A Grease Petroleum Base - - - - A A

Germane (Germanium Tetrahydride) - - - - - - Green Sulfate Liquor - - - - B B

Girling Brake Fluid - - - - C C Gulf FR Fluids (Emulsion) - - - - A A

Glauber’s Salt - - - - D D Gulf FR G-Fluids - - - - A A

Gluconic Acid - - - - C C Gulf FR P-Fluids - - - - D D

Glucose A B - B A A Gulf High Temperature Grease - - - - A A

Glue - - - - - - Gulfcrown Grease - - - - A A

Glue, P.V.A. A A - – - - Halothane - - - - D D

Glutamic Acid - - - - C C Hannifin Lube A - - - - A A

Glycerin A A A A A A Heavy Water - - - - A A

Glycerol Dichlorohydrin - - - - C C Helium - - - - A A

Glycerol Monochlorohydrin - - - - C C Heptachlor - - - - B B

Glycerol Triacetate - - - - C C Heptachlorobutene - - - - B B

Glycerophosphoric Acid - - - - C C Heptaldehyde (Heptanal) - - - - A A

Glyceryl Phosphate - - - - C C Heptane A A A A A A

Glycidol - - - - C C Heptanoic Acid - - - - A A

Glycol Monoether - - - - - - Hexachloroacetone - - - - C C

Glycolic Acid - D - A C C Hexachlorobutadiene - - - - B B

Glycols - - - - A A Hexachlorobutene - - - - B B

Glycoxylic Acid - - - - C C Hexachloroethane - - - - B B

Gold Monocyanide - - - – A A Hexaethyl Tetraphosphate - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 24: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Hexafluoroethane (F-116) - - - - - - Hydrazine (Anhydrous) - - - - D D

Hexafluoroxylene - - - - - - Hydrazine Dihydrochloride - - - - C C

Hexaldehyde or n-Hexaldehyde - - - - D D Hydrazine Hydrate - - - - C C

Hexamethyldisilizane - - - - - - Hydriodic Acid - - - - B B

Hexamethylene (Cyclohexane) - - - - A A Hydrobromic Acid 100% D D D A1 D D

Hexamethylene Diammonium Adipate - - - - B B Hydrobromic Acid 20% D D D – A D

Hexamethylenediamine - - - - C C Hydrobromic Acid 40% - - - - D D

Hexamethylenetetramine - - - - C C Hydrocarbons, Saturated - - - - A A

Hexane A A A A A A Hydrochloric Acid (hot) 37% - - - - D D

Hexene-1 or n-Hexene-1 - - - - B B Hydrochloric Acid 100% D D A D A D

Hexone (Methyl Isobutyl Ketone) - - - - C C Hydrochloric Acid 20% D D A D A –

Hexyl Acetate - - - - A A Hydrochloric Acid 37% D D A D D D

Hexylene Glycol - - - - C C Hydrochloric Acid, 3 Molar to 158°F - - - - B B

Hexylresorcinol - - - - B B Hydrochloric Acid, Concentrated Room Temp. - - - - B B

HFC-245fa - - - - - - Hydrochloric Acid, Concentrated to 158°F - - - - D D

High Viscosity Lubricant, H2 - - - - A A Hydrochloric Acid, Dry Gas D - A D – –

High Viscosity Lubricant, U4 - - - - A A Hydrocyanic Acid A B A B A B

HiLo MS #1 - - - - D D Hydrocyanic Acid (Gas 10% ) - - A – A B

Honey A - - – A A Hydro-Drive MIH-10 (Petroleum Base) - - - - A A

Houghto-Safe 1010 phosphate ester - - - - D D Hydro-Drive MIH-50 (Petroleum Base) - - - - A A

Houghto-Safe 1055 phosphate ester - - - - D D Hydrofluoric Acid (Anhydrous) - - - - - -

Houghto-Safe 1120 phosphate ester - - - - D D Hydrofluoric Acid (conc.) Cold - - - - - -

Houghto-Safe 271 (Water & Glycol Base) - - - - A A Hydrofluoric Acid (conc.) Hot - - - - D D

Houghto-Safe 416 & 500 Series - - - - A A Hydrofluoric Acid 100% D D D D - -

Houghto-Safe 620 Water/Glycol - - - - A A Hydrofluoric Acid 20% D D D A - -

Hydrazine - D A – D B Hydrofluoric Acid 50% D D D A - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 25: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Hydrofluoric Acid 75% D D D B - - Hydrogen Sulfide, Wet, Hot - - - - D D

Hydrofluorosilicic Acid - - - - B B Hydrolube-Water/Ethylene Glycol - - - - A A

Hydrofluosilicic Acid 100% D D - A1 B B Hydrooxycitronellal - - - - - -

Hydrofluosilicic Acid 20% D D - A B B Hydroquinol - - - - D D

Hydrogen Bromide (Anhydrous) - - - - - - Hydroquinone B - - – B C

Hydrogen Chloride (Anhydrous) - - - - - - Hydroxyacetic Acid 70% - - - – C C

Hydrogen Chloride gas - - - - D D Hydyne - - - - B B

Hydrogen Cyanide - - - - - - Hyjet - - - - D D

Hydrogen Fluoride - - - - - - Hyjet IV and IVA - - - - D D

Hydrogen Fluoride (Anhydrous) - - - - D D Hyjet S4 - - - - D D

Hydrogen Gas A A - A A A Hyjet W - - - - D D

Hydrogen Gas, Cold - - - - A A Hypochlorous Acid - - - - D D

Hydrogen Gas, Hot - - - - A A Indium Sulfamate Plating R.T. - - - – A A

Hydrogen Iodide (Anhydrous) - - - - - - Indole - - - - - -

Hydrogen Peroxide - - - - B B Industron FF44 - - - - A A

Hydrogen Peroxide 10% A D A A A D Industron FF48 - - - - A A

Hydrogen Peroxide 100% A D A C A D Industron FF53 - - - - A A

Hydrogen Peroxide 30% A D A A1 A D Industron FF80 - - - - A A

Hydrogen Peroxide 50% A D A – A D Ink - - - – A A

Hydrogen Peroxide 90% - - - - D D Insulin - - - - C C

Hydrogen Selenide - - - - - - Iodic Acid - - - - C C

Hydrogen Sulfide (aqua) B D A A D D Iodine A D C D A B

Hydrogen Sulfide (dry) B D A A D D Iodine (in alcohol) B - A – – –

Hydrogen Sulfide, Dry, Cold - - - - A A Iodine Pentafluoride - - - - D D

Hydrogen Sulfide, Dry, Hot - - - - D D Iodoform - - - – A D

Hydrogen Sulfide, Wet, Cold - - - - D D Iron Plating: - Ferrous Am Sulfate Bath 150°F - - - – A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 26: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Iron Plating: - Ferrous Chloride Bath 190°F - - - – A B Isophorone (Ketone) - - - - D D

Iron Plating: - Ferrous Sulfate Bath 150°F - - - – A A Isopropanol - - - - B B

Iron Plating: - Fluoborate Bath 145°F - - - – A B Isopropyl Acetate D A - – D D

Iron Plating: - Sulfamate 140°F - - - – A A Isopropyl Chloride - - - - D D

Iron Plating: - Sulfate-Chloride Bath 160°F - - - – A B Isopropyl Ether A A A – D B

Isoamyl Acetate - - - - C C Isopropylacetone - - - - C C

Isoamyl Butyrate - - - - C C Isopropylamine - - - - C C

Isoamyl Valerate - - - - C C Isotane D - - – A A

Isoboreol - - - - - - JP-10 - - - - C C

Isobutane - - - - A A JP-3 (MIL-J-5624) - - - - A A

Isobutyl Acetate - - - - C C JP-4 (MIL-T-5624) (Jet A1) - - - - A A

Isobutyl Chloride - - - - D D JP-5 (MIL-T-5624) - - - - A A

Isobutyl Ether - - - - B B JP-6 (MIL-J-25656) - - - - A A

Isobutyl Methyl Ketone - - - - C C JP-8 (MIL-T-83133) (Jet A) - - - - A A

Isobutyl n-Butyrate - - - - D D JP-9 (MIL-F-81912) - - - - C C

Isobutyl Phosphate - - - - C C JP-9 -11 - - - - D D

Isobutylene - - - - - - JPX (MIL-F-25604) - - - - A A

Isobutyraldehyde - - - - C C Karl Fischer Reagent - - - - - -

Isobutyric Acid - - - - A A Kel F Liquids - - - - A A

Isocrotyl Chloride - - - - - - Ketones B B A A D D

Isodecanol - - - - A A Keystone #87HX-Grease - - - - A A

Isododecane - - - - A A Lacquer Solvents - - - - D D

Isoeugenol - - - - A A Lacquer Thinners A A - – D D

Isooctane A1 A A A A A Lacquers A A - – D D

Isopar K - - - - - - Lactams-Amino Acids - - - - D D

Isopentane - - - - A A Lactic Acid B D A A D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 27: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Lactic Acid, Cold - - - - A A Lime A - - – A A

Lactic Acid, Hot - - - - D D Lime Bleach - - - - A A

Lactones (Cyclic Esters) - - - - D D Lime Sulfur - - - - - -

Lard A A A – A A Lindol, Hydraulic Fluid (Phosphate ester type) - - - - D D

Latex A A - – A A Linoleic Acid A2 D - – B B

Lauric Acid - - - - A A Liquid Oxygen (LOX) - - - - D D

LB 135 - - - - A A Liquid Petroleum Gas (LPG) - - - - A A

Lead (Molten) - - - - - - Liquimoly - - - - A A

Lead Acetate D D A A D B Lithium Bromide (Brine) - - - - C C

Lead Arsenate - - - - C C Lithium Carbonate - - - - C C

Lead Azide - - - - - - Lithium Chloride D D - – C C

Lead Bromide - - - - C C Lithium Citrate - - - - C C

Lead Carbonate - - - - C C Lithium Hydroxide D B - – C C

Lead Chloride - - - - C C Lithium Hypochlorite - - - - C C

Lead Chromate - - - - C C Lithium Nitrate - - - - C C

Lead Dioxide - - - - C C Lithium Nitrite - - - - C C

Lead Fluoborate Plating - - - – A B Lithium Perchlorate - - - - C C

Lead Linoleate - - - - C C Lithium Salicylate - - - - C C

Lead Naphthenate - - - - - - Lithopone - - - - C C

Lead Nitrate D D - A A2 A Lubricants A2 A A A A A

Lead Oxide - - - - C C Lye: Ca(OH)2 Calcium Hydroxide C1 D B A B B

Lead Sulfamate C C - – A B Lye: KOH Potassium Hydroxide D D B A B B

Lehigh X1169 - - - - A A Lye: NaOH Sodium Hydroxide D D B A B B

Lehigh X1170 - - - - A A Magnesium Bisulfate D - - A – B

Light Grease - - - - A A Magnesium Carbonate A - - – A A2

Ligroin D - A – A A Magnesium Chloride D C B A1 A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 28: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Magnesium Hydroxide C1 A A A A B Mash A - - – A A

Magnesium Nitrate B C - A A A Mayonnaise A - - – A C

Magnesium Oxide B - - – C A MCS 312 - - - - D D

Magnesium Salts - - - - A A MCS 352 - - - - D D

Magnesium Sulfate (Epsom Salts) B1 B A A A A MCS 463 - - - - D D

Magnesium Trisilicate - - - - - - MDI (Methylene di-p-phenylene isocyanate) - - - - C C

Malathion - - - - B B Melamine - - - – A C

Maleic Acid B1 D A B A D Mercaptan - - - - A A

Maleic Anhydride A - - – D D Mercaptobenzothiazole (MBT) - - - - - -

Maleic Hydrazide - - - - C C Mercuric Acetate - - - - C C

Malic Acid B1 D - – A A Mercuric Chloride (dilute) D D A A A A

Mandelic Acid - - - - C C Mercuric Cyanide D D - A C C

Manganese Acetate - - - - C C Mercuric Iodide - - - - C C

Manganese Carbonate - - - - C C Mercuric Nitrate - - - - C C

Manganese Chloride - - - - C C Mercuric Sulfate - - - - C C

Manganese Dioxide - - - - C C Mercuric Sulfite - - - - C C

Manganese Gluconate - - - - C C Mercurous Nitrate D B - – C C

Manganese Hypophosphite - - - - C C Mercury D C A – A A

Manganese Linoleate - - - - C C Mercury Chloride - - - - C C

Manganese Naphthenate - - - - - - Mercury Fulminate - - - - C C

Manganese Phosphate - - - - C C Mercury Salts - - - - C C

Manganese Sulfate B1 B - A2 C C Mercury Vapors - - - - A A

Manganous Chloride - - - - C C Mesityl Oxide (Ketone) - - - - D D

Manganous Phosphate - - - - C C Meta-Cresol - - - - - -

Manganous Sulfate - - - - C C Metaldehyde - - - - C C

Mannitol - - - - C C Meta-Nitroaniline - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 29: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Meta-Toluidine - - - - - - Methyl Chloroform - - - - D D

Methacrylic Acid - - - - C C Methyl Chloroformate - - - - D D

Methallyl Chloride - - - - - - Methyl Chlorosilanes - - - - - -

Methane A D A – A A Methyl Cyanide (Acetonitrile) - - - - C C

Methanol (Methyl Alcohol) A1 A A A D D Methyl Cyclohexanone - - - - A A

Methoxychlor - - - - - - Methyl Dichloride - - - – A D

Methoxyethanol (DGMMA) - - - - C C Methyl Ether - - - - A A

Methyl Abietate - - - - - - Methyl Ethyl Ketone B A A A D D

Methyl Acetate A B A – D D Methyl Ethyl Ketone Peroxide - - - – D D

Methyl Acetoacetate - - - - D D Methyl Ethyl Oleate - - - - - -

Methyl Acetone A A - – D D Methyl Formate - - - - D D

Methyl Acetophenone* - - - - - - Methyl Hexyl Ketone (2-Octanone) - - - - C C

Methyl Acrylate - - - – D D Methyl Iodide - - - - A A

Methyl Alcohol 10% A1 - A A C A Methyl Isobutyl Ketone B A A A D D

Methyl Amylketone - - - - C C Methyl Isocyanate - - - - C C

Methyl Anthranilate - - - - - - Methyl Isopropyl Ketone A - A – D D

Methyl Benzoate - - - - D D Methyl Isovalerate - - - - - -

Methyl Bromide D A - – A B Methyl Lactate - - - - C C

Methyl Butyl Ketone - - A – D D Methyl Mercaptan - - - - - -

Methyl Butyrate Cellosolve - - - - C C Methyl Methacrylate - - - – D D

Methyl Butyrate Chloride - - - - C C Methyl Oleate - - - - D D

Methyl Carbonate - - - - D D Methyl Pentadiene - - - - - -

Methyl Cellosolve B A - – D C Methyl Phenylacetate - - - - - -

Methyl Cellulose - - - - B B Methyl Salicylate - - - - D D

Methyl Chloride D D - B A D Methyl Tertiary Butyl Ether (MTBE) - - - - C C

Methyl Chloroacetate - - - - C C Methyl Valerate - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 30: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Methyl-2-Pyrrolidone or n-Methyl-2-Pyrrolidone - - - - - - MIL-F-81912 (JP-9) - - - - C C

Methylacrylic Acid - - - - D D MIL-F-82522 (RJ-4) - - - - B B

Methylal - - - - - - MIL-G-10924 - - - - A A

Methylamine A A - – C C MIL-G-15793 - - - - A A

Methylamyl Acetate - - - - C C MIL-G-21568 - - - - A A

Methylcyclopentane - - - - D D MIL-G-23827 - - - - A A

Methyldiethanolamine (MDEA) - - - - - - MIL-G-25013 - - - - A A

Methylene Bromide - - - - - - MIL-G-25537 - - - - A A

Methylene Chloride C B A A B D MIL-G-25760 - - - - B B

Methylene Iodide - - - - - - MIL-G-3278 - - - - B B

Methylglycerol - - - - C C MIL-G-3545 - - - - A A

Methylisobutyl Carbinol - - - - A A MIL-G-4343 - - - - B B

Methylphenyl Carbinol - - - - - - MIL-G-5572 - - - - A A

Methylpyrrolidine - - - - - - MIL-G-7118 - - - - B B

Methylpyrrolidone - - - - - - MIL-G-7187 - - - - A A

Methylsulfuric Acid - - - - C C MIL-G-7421 - - - - B B

MIL-A-6091 - - - - B B MIL-G-7711 - - - - A A

MIL-C-4339 - - - - A A MIL-H-13910 - - - - A A

MIL-C-7024 - - - - A A MIL-H-19457 - - - - D D

MIL-C-8188 - - - - B B MIL-H-22072 - - - - A A

MIL-E-9500 - - - - A A MIL-H-22251 - - - - B B

MIL-F-16884 - - - - A A MIL-H-27601 - - - - A A

MIL-F-17111 - - - - A A MIL-H-46170 -15°F to +400°F - - - - A A

MIL-F-25558 (RJ-1) - - - - A A MIL-H-46170 -20°F to +275°F - - - - A A

MIL-F-25656 - - - - A A MIL-H-46170 -55°F to +275°F - - - - A A

MIL-F-5566 - - - - B B MIL-H-46170 -65°F to +275°F - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 31: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

MIL-H-5606 -65°F to +235°F - - - - A A MIL-PRF-17672 - - - - - -

MIL-H-5606 -65°F to +275°F - - - - A A MIL-PRF-2105 - - - - - -

MIL-H-6083 - - - - A A MIL-PRF-81322 - - - - A A

MIL-H-7083 - - - - A A MIL-PRF-87252 - - - - - -

MIL-H-81019 - - - - A A MIL-R-25576 (RP-1) - - - - A A

MIL-H-8446 (MLO-8515) - - - - B B MIL-S-81087 - - - - A A

MIL-J-5161 - - - - B B MIL-T-5624, JP-4, JP-5 - - - - A A

Milk A D A – A A MIL-T-83133 - - - - A A

MIL-L-15016 - - - - A A Mineral Spirits A A - A A A

MIL-L-15017 - - - - A A Mixed Acids - - - - C C

MIL-L-17331 - - - - A A MLO-7277 Hydr. - - - - C C

MIL-L-2104 - - - - A A MLO-7557 - - - - C C

MIL-L-21260 - - - - A A MLO-8200 Hydr. - - - - B B

MIL-L-23699 - - - - B B MLO-8515 - - - - B B

MIL-L-25681 - - - - B B Mobil 254 Lubricant - - - - - -

MIL-L-3150 - - - - A A Mobil Delvac 1100, 1110, 1120, 1130 - - - - A A

MIL-L-6081 - - - - A A Mobil DTE 20 Series - - - - A A

MIL-L-6082 - - - - A A Mobil HF - - - - A A

MIL-L-6085 - - - - B B Mobil Nivac 20, 30 - - - - A A

MIL-L-6387 - - - - B B Mobil SHC 500 Series - - - - C C

MIL-L-7808 - - - - B B Mobil SHC 600 Series - - - - C C

MIL-L-7870 - - - - A A Mobil Therm 600 - - - - A A

MIL-L-9000 - - - - A A Mobil Velocite c - - - - A A

MIL-L-9236 - - - - B B Mobilgas WA200 ATF - - - - A A

MIL-O-3503 - - - - A A Mobilgear 600 Series - - - - C C

MIL-P-27402 - - - - B B Mobilgear SHC ISO Series - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 32: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Mobilgrease HP - - - - B B Monomethyl Ether (Dimethyl Ether) - - - - - -

Mobilgrease HTS - - - - B B Monomethyl Ether (Methyl Ether) - - - - A A

Mobilgrease SM - - - - B B Monomethyl Hydrazine - - - - B B

Mobilith AW Series - - - - B B Monomethylamine (MMA) - - - - C C

Mobilith SHC Series - - - - B B Monomethylaniline - - - - D D

Mobiljet 291 - - - - - - Mononitrotoluene - - - - C C

Mobiljet II Lubricant - - - - - - Mononitrotoluene & Dinitrotoluene (40/60 Mixture) - - - - D D

Mobilmistlube Series - - - - C C Monovinyl Acetylene - - - - A A

Mobilux - - - - A A Mopar Brake Fluid - - - - C C

Molasses A B A – A A Morpholine - A - C A D

Molybdenum Disulfide Grease - - - - A A Mustard B D - – D B

Molybdenum Oxide - - - - C C Mustard Gas - - - - - -

Molybdenum Trioxide - - - - C C Myristic Acid - - - - - -

Molybdic Acid - - - - C C Naphtha A B A A B B

Monobromobenzene - - - - D D Naphthalene B1 A A A A D

Monobromotoluene - - - - - - Naphthalene Chloride - - - - - -

Monobutyl Paracresol - - - - - - Naphthalene Sulfonic Acid - - - - - -

Monochloroacetic Acid - - - – C C Naphthalenic Acid - - - - - -

Monochloroacetic acid D D A – C C Naphthalonic Acid - - - - - -

Monochlorobenzene - - - - D D Naphthenic Acid - - - - B B

Monochlorobutene - - - - - - Naphthylamine - - - - - -

Monochlorohydrin - - - - - - Natural Gas A A A – A A

Monoethanolamine B B - A D D Neon - - - - A A

Monoethyl Amine - - - - C C Neville Acid - - - - D D

Monoisopropylamine - - - - C C Nickel Acetate - - - - B B

Monomethyl Aniline - - - - D D Nickel Ammonium Sulfate - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 33: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Nickel Chloride D D A A A A Nitric Acid, Red Fuming - - - - D D

Nickel Cyanide - - - - C C Nitric Acid, White Fuming - - - - - -

Nickel Nitrate D C A – C C Nitric Oxide - - - - C C

Nickel Plating: - Electroless 200°F - - - – A D Nitroaniline - - - - C C

Nickel Plating: - Fluoborate 100-170°F - - - – A B Nitrobenzene B B A A2 B D

Nickel Plating: - High-Chloride 130-160°F - - - – A A Nitrobenzoic Acid - - - - C C

Nickel Plating: - Sulfamate 100-140°F - - - – A A Nitrocellulose - - - - C C

Nickel Plating: - Watts Type 115-160°F - - - – A A Nitrochlorobenzene - - - - C C

Nickel Salts - - - - A A Nitrochloroform - - - - C C

Nickel Sulfate D D A A A A Nitrodiethylaniline - - - - C C

Nicotinamide (Niacinamide) - - - - - - Nitrodiphenyl Ether - - - - - -

Nicotinamide Hydrochloride - - - - C C Nitroethane - - - - D D

Nicotine - - - - - - Nitrofluorobenzene - - - - C C

Nicotine Sulfate - - - - C C Nitrogen - - - - A A

Niter Cake - - - - A A Nitrogen Dioxide - - - - C C

Nitrating Acid (<15% HNO3) D - - D – – Nitrogen Fertilizer - A - – – –

Nitrating Acid (>15% H2SO4) D - - D – D Nitrogen Oxides - - - - C C

Nitrating Acid (�1% Acid) D - - C – – Nitrogen Tetroxide (N2O4) - - - - D D

Nitrating Acid (�15% H2SO4) D - - C – – Nitrogen Trifluoride - - - - - -

Nitric Acid (20% ) D D A C D D Nitroglycerine - - - - C C

Nitric Acid (50% ) D D D C D D Nitrogylcerol - - - - C C

Nitric Acid (5-10% ) D D A A D D Nitroisopropylbenzene - - - - C C

Nitric Acid (Concentrated) D D D C D D Nitromethane A B A A2 D D

Nitric Acid 3 Molar to 158°F - - - - D D Nitrophenol - - - - C C

Nitric Acid Concentrated Room Temp. - - - - - - Nitropropane - - - - D D

Nitric Acid Concentrated to 158°F - - - - D D Nitrosyl Chloride - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 34: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Nitrosylsulfuric Acid - - - - - - OIL - Bone - - - - A A

Nitrothiophene - - - - C C OIL - BP Turbine Oil 2197 - - - - D D

Nitrotoluene - - - - C C OIL - Bunker Oil - - - - A A

Nitrous Acid D D - – C C OIL - Castor A - A - A A

Nitrous Oxide B B A – A A OIL - China Wood Oil (Tung Oil) - - - - A A

Nonane - - - - A A OIL - Cinnamon - - - - A –

Nonylphenoxy Polyethoxy Ethanol - - - - - - OIL - Circo Light Process Oil - - - - A A

Noryl GE Phenolic - - - - A A OIL - Citric Oils C - A - A A

Nyvac FR200 Mobil - - - - A A OIL - City Service Koolmoter-AP Gear Oil 140-EP Lube - - - - A A

Octachloro Toluene - - - - D D OIL - Clove B - - - A A

Octadecane - - - - A A OIL - Coconut A - A - A A

Octanal (n-Octanaldehyde) - - - - A A OIL - Cod Liver A - - - A A

Octane or n-Octane - - - - A A OIL - Corn A - - - A A

Octyl Acetate - - - - C C OIL - Cottonseed A B - - A A

Octyl Chloride - - - - A A OIL - Creosote B B A - A D

Octyl Phthalate - - - - - - OIL - Crude Oil - - - - B B

OIL - Aniline D A A - D D OIL - Cutting Oil - - - - A A

OIL - Animal Oil (Lard Oil) - - - - A A OIL - Esso Motor Oil - - - - A A

OIL - Anise - - - - – – OIL - Fish Oil - - - - B B

OIL - Askarel Transformer Oil - - - - B B OIL - Fluorocarbon Oils - - - - - -

OIL - ASTM No. 1 - - - - A A OIL - Freon, 12 and ASTM Oil #2 (50/50 Mixture) - - - - B B

OIL - ASTM No. 2 - - - - A A OIL - Freon, 22 and ASTM Oil #2 (50/50 Mixture) - - - - D D

OIL - ASTM No. 3 - - - - A A OIL - Frick #3 Compressor Oil - - - - - -

OIL - ASTM No. 4 - - - - B B OIL - Ginger - - - - A A

OIL - ASTM No. 5 - - - - A A OIL - Gulf Endurance Oils - - - - A A

OIL - Bay - - - - A – OIL - Gulf Harmony Oils - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 35: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

OIL - Gulf Legion Oils - - - - A A OIL - Orange A - - - A A

OIL - Gulf Paramount Oils - - - - A A OIL - PAG Compressor Oil - - - - - -

OIL - Gulf Security Oils - - - - A A OIL - Palm - - - - A A

OIL - Halowax Oil - - - - D D OIL - Peanut A - A - A A

OIL - Houghto-Safe 5040 (Water/Oil emulsion) - - - - A A OIL - Peanut Oil - - - - A A

OIL - Hydraulic Oil (Petro) A A A - A A OIL - Peppermint D - - - A D

OIL - Hydraulic Oil (Synthetic) A A A - B B OIL - Petroleum Oil, Above 250°F - - - - D D

OIL - Lavender Oil - - - - B B OIL - Petroleum Oil, Below 250°F - - - - A A

OIL - Lemon A - - - A – OIL - Petroleum Oil, Crude - - - - A A

OIL - Linseed B A A - A A OIL - Pine A - - - A A

OIL - Linseed Oil - - - - A A OIL - PRL-High Temp. Hydr. Oil - - - - B B

OIL - Lubricating Oils (Crude & Refined) - - - - B B OIL - Pyranol Transformer Oil - - - - A A

OIL - Lubricating Oils (Synthetic base) - - - - - - OIL - Pyridine Oil - - - - D D

OIL - Lubricating Oils, Di-ester - - - - B B OIL - Pyrogard D, Mobil Water-in-Oil Emulsion - - - - A A

OIL - Lubricating Oils, petroleum base - - - - A A OIL - Rapeseed - - - - A D

OIL - Lubricating Oils, SAE 10, 20, 30, 40, 50 - - - - A A OIL - Rapeseed Oil - - - - B B

OIL - MIL-S-3136, Type IV Oil High Swell - - - - A A OIL - Red Line 100 Oil - - - - A A

OIL - MIL-S-3136, Type IV Oil Low Swell - - - - A A OIL - Red Oil (MIL-H-5606) - - - - A A

OIL - MIL-S-3136, Type V Oil Medium Swell - - - - A A OIL - Rosin B1 C - - A A

OIL - Mineral A B A - A A OIL - Sesame Seed - - - - A A

OIL - Mineral Oils - - - - A A OIL - Silicone A A A - A A

OIL - Mobiloil SAE 20 - - - - A A OIL - Silicone Oils - - - - A A

OIL - Motor oil A1 A A - A A OIL - Sour Crude Oil - - - - C C

OIL - Neatsfoot Oil - - - - A A OIL - Soybean A B A - A A

OIL - Olive A - - - A D OIL - Soybean Oil - - - - A A

OIL - Olive Oil - - - - A A OIL - Sperm (whale) - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 36: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

OIL - Standard Oil Mobilube GX90-EP Lube - - - - A A Oleum 100% B - - A1 A D

OIL - Sulfonated Oils - - - - B B Oleum 25% B - - A1 A D

OIL - Tanning - - - - A A Oleum Spirits - - - - B B

OIL - Texaco 3450 Gear Oil - - - - A A Oronite 8200 - - - - B B

OIL - Texamatic “A” Transmission Oil - - - - A A Oronite 8515 - - - - B B

OIL - Texas 1500 Oil - - - - A A Ortho-Chloro Ethyl Benzene - - - - D D

OIL - Tidewater Oil-Beedol - - - - A A Ortho-Chloroaniline - - - - C C

OIL - Transformer A - A - A A Ortho-Chlorophenol - - - - C C

OIL - Transformer Oil - - - - A A Ortho-Cresol - - - - C C

OIL - Tung Oil (China Wood Oil) - - - - A A Ortho-Dichlorobenzene - - - - D D

OIL - Turbine A - - - A B Ortho-Nitrotoluene - - - - C C

OIL - Turbine Oil - - - - A A Orthophos Acid - - - - - -

OIL - Turbine Oil #15 (MIL-L-7808A) - - - - B B OS 45 Type III (OS45) - - - - B B

OIL - Turbo Oil #35 - - - - A A OS 45 Type IV (OS45-1) - - - - B B

OIL - Ucon Oil 50-HB-280x - - - - B B OS 70 - - - - B B

OIL - Ucon Oil Heat Transfer Fluid 500 (Polyalkalene Glycol) - - - - A A Oxalic Acid (cold) A D A A B B

OIL - Ucon Oil LB-385 - - - - A A Oxygen, 200°-300°F (Evalute for specific applications) - - - - D D

OIL - Ucon Oil LB-400X - - - - A A Oxygen, 300°-400°F (Evalute for specific applications) - - - - D D

OIL - Univolt #35 (Mineral Oil) - - - - A A Oxygen, Cold (Evalute for specific applications) - - - - B B

OIL - Vegetable Oil - - - - A A Oxygen, Liquid - - - - D D

OIL - White Oil - - - - A A Ozonated Deionized Water - - - - C C

OIL - White Pine Oil - - - - B B Ozone B C A – A D

OIL - Wood Oil - - - - A A Paint Thinner, Duco - - - - D D

Olefins - - - - - - Palmitic Acid B D - – A A

Oleic Acid A D A A B C PAO - - - - - -

Oleum (Fuming Sulfuric Acid) - - - - D D Para-Aminobenzoic Acid - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 37: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Para-Aminosalicylic Acid - - - - C C Pentane, 2-4 dimethyl - - - - A A

Para-Bromobenzylphenyl Ether - - - - - - Pentane, 3-Methyl - - - - A A

Para-Chlorophenol - - - - C C Pentoxone - - - - - -

Paracymene - - - - - - Pentyl Pentanoate - - - - A A

Para-Dichlorobenzene - - - - D D Peracetic Acid - - - - C C

Paraffin A A A – A A Perchloric Acid D D A – D D

Para-Formaldehyde - - - - C C Perchloroethylene C A A A A B

Paraldehyde - - - - C C Perfluoropropane - - - - - -

Par-al-Ketone - - - - D D Perfluorotriethylamine - - - - - -

Para-Nitroaniline - - - - C C Permanganic Acid - - - - - -

Para-Nitrobenzoic Acid - - - - C C Persulfuric Acid (Caro’s Acid) - - - - - -

Para-Nitrophenol - - - - C C Petrolatum - D A – A A

Parathion - - - - - - Petrolatum Ether - - - - A A

Para-Toluene Sulfonic Acid - - - - C C Petroleum D C A – A2 A2

Paraxylene - - - - - - Phenol (10% ) A - - A D D

Parker O Lube - - - - A A Phenol (Carbolic Acid) A - D A A D

Pectin (Liquor) - - - - - - Phenol, 70% / 30% H2O - - - - D D

Pelagonic Acid - - - - - - Phenol, 85% / 15% H2O - - - - D D

Penicillin (Liquid) - - - - - - Phenolic Sulfonate - - - - C C

Pentachloroethane - - - - - - Phenolsulfonic Acid - - - - C C

Pentachlorophenol - - - - C C Phenylacetamide - - - - - -

Pentaerythritol - - - - C C Phenylacetate - - - - C C

Pentaerythritol Tetranitrate - - - - C C Phenylacetic Acid - - - - C C

Pentafluoroethane (F-125) - - - - - - Phenylbenzene - - - - D D

Pentane B C A – A A Phenylene Diamine - - - - - -

Pentane, 2 Methyl - - - - A A Phenylethyl Ether - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 38: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Phenylethyl Malonic Ester* - - - - - - Picric Acid C C A A A A

Phenylglycerine - - - - C C Picric Acid Molten - - - - B B

Phenylhydrazine - - - - D D Pine Tar - - - - A A

Phenylhydrazine Hydrochloride - - - - C C Pinene - - - - B B

Phenylmercuric Acetate - - - - C C Piperazine - - - - - -

Phorone - - - - D D Piperidine - - - - D D

Phosgene - - - - - - Piranha (H2SO4:H2O2)(70:30) - - - - - -

Phosphine - - - - - - Plating - Antimony Plating 130°F A - - – A A

Phosphoric Acid (>40% ) C D A A - - Plating - Arsenic Plating 110°F A - - – A A

Phosphoric Acid (crude) C D A A A D Plating Solution (Co,Cu,Au,In,Fe,Pb,Ni,Ag,Sn,Zn) - - - - A A

Phosphoric Acid (molten) C D - – – – Plating Solutions Chrome - - - - D D

Phosphoric Acid (�40% ) C D - A - - Plating Solutions Others - - - - A A

Phosphoric Acid 3 Molar to 158°F - - - - A A Pneumatic Service - - - - A A

Phosphoric Acid Anhydride C D - D – D Polyetherpolyol - - - - - -

Phosphoric Acid Concentrated Room Temp - - - - B B Polyethylene Glycol - - - - B B

Phosphoric Acid Concentrated to 158°F - - - - D D Polyglycerol - - - - C C

Phosphorus B A - – – – Polyglycol - - - - C C

Phosphorus (Molten) - - - - - - Polyolester (POE) - - - - - -

Phosphorus Oxychloride - - - - - - Polyvinyl Acetate Emulsion - - - - - -

Phosphorus Trichloride D A A A A D Potash (Potassium Carbonate) D B A – A A

Phosphorus Trichloride Acid - - - - D D Potassium (Molten) - - - - - -

Photographic Developer - D - – A A Potassium Acetate - - - - B B

Photographic Solutions - D A A2 B1 B Potassium Acid Sulfate - - - - C C

Phthalic Acid B2 A A – C C Potassium Alum - - - - C C

Phthalic Anhydride A A - – C C Potassium Aluminum Sulfate - - - - C C

Pickling Solution - - - - D D Potassium Antimonate - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 39: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Potassium Bicarbonate D B A A C C Potassium Metachromate - - - - C C

Potassium Bichromate - - - - C C Potassium Metasilicate - - - - - -

Potassium Bifluoride - - - - C C Potassium Monochromate - - - - C C

Potassium Bisulfate - - - - C C Potassium Nitrate B B A A A A

Potassium Bisulfite - - - - C C Potassium Nitrite - - - - C C

Potassium Bitartrate - - - - C C Potassium Oxalate B1 - - – C C

Potassium Bromide C1 - - A C C Potassium Perchlorate - - - - C C

Potassium Carbonate - - - - C C Potassium Perfluoro Acetate - - - - - -

Potassium Chlorate B - A A C C Potassium Permanganate B1 B A A C C

Potassium Chloride D D A A A A Potassium Peroxide - - - - - -

Potassium Chromate B1 B - – C C Potassium Persulfate - - - - C C

Potassium Citrate - - - - C C Potassium Phosphate (Acid) - - - - C C

Potassium Cupro Cyanide - - - - A A Potassium Phosphate (Alkaline) - - - - C C

Potassium Cyanate - - - - C C Potassium Phosphate (Di/Tri Basic) - - - - C C

Potassium Cyanide Solutions D B - A A A Potassium Pyrosulfate - - - - C C

Potassium Dichromate B B - A A A Potassium Salts - - - - A A

Potassium Diphosphate - - - - C C Potassium Silicate - - - - - -

Potassium Ferricyanide B2 D A – C C Potassium Sodium Tartrate - - - - C C

Potassium Ferrocyanide B1 D A – A D Potassium Stannate - - - - C C

Potassium Fluoride - - - - C C Potassium Stearate - - - - C C

Potassium Glucocyanate - - - - C C Potassium Sulfate C B A A A A

Potassium Hydroxide (Caustic Potash) D C A A B B Potassium Sulfide D C A A C C

Potassium Hypochlorite D D - A C C Potassium Sulfite - - - - A A

Potassium Iodate - - - - C C Potassium Tartrate - - - - C C

Potassium Iodide B1 - - A2 C C Potassium Thiocyanate - - - - C C

Potassium Metabisulfate - - - - C C Potassium Thiosulfate - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 40: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Potassium Triphosphate - - - - C C Pyridine Sulfate - - - - C C

Prestone Antifreeze - - - - A A Pyridine Sulfonic Acid - - - - C C

Producer Gas - - - - A A Pyrogallic Acid B B - – B B

Propane (liquefied) A B A – A A Pyrogard 42, 43, 55 - - - - D D

Propionaldehyde - - - - C C Pyrogard 53, Mobil Phosphate Ester - - - - D D

Propionic Acid - - - - C C Pyroligneous Acid - - - - D D

Propionitrile - - - - A A Pyrolube - - - - D D

Propyl Acetate - - - - D D Pyrosulfuric Acid - - - - C C

Propyl Acetone or n-Propyl Acetone - - - - D D Pyrosulfuryl Chloride - - - - B B

Propyl Nitrate - - - - D D Pyrrole - - - - D D

Propyl Propionate - - - - C C Pyruvic Acid - - - - C C

Propylamine - - - - C C Quinidine - - - - B B

Propylbenzene - - - - - - Quinine - - - - B B

Propylene A A - – A C Quinine Bisulfate - - - - C C

Propylene Chloride - - - - - - Quinine Hydrochloride - - - - C C

Propylene Chlorohydrin - - - - - - Quinine Sulfate - - - - C C

Propylene Dichloride - - - - - - Quinine Tartrate - - - - C C

Propylene Glycol B B - – C C Quinizarin - - - - B B

Propylene Imine - - - - - - Quinoline - - - - B B

Propylene Oxide - - - - D D Quinone - - - - B B

Pydraul 90e - - - - D D Quintolubric - - - - - -

Pydraul, 10E - - - - D D Quintolubric 888 - - - - A A

Pydraul, 115E - - - - D D Radiation (Gamma, 1.0 E+07 Rads) - - - - C C

Pydraul, 230C, 312C, 540C, A200 - - - - D D Raffinate - - - - B B

Pydraul, 29ELT 30E, 50E, 65E - - - - D D Resorcinol - - A - C C

Pyridine B A A A A D Rhodium - - - - - -

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 41: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Rhodium Plating 120°F - - - – A A Shell Irus 905 - - - - A A

Riboflavin - - - - B B Shell Lo Hydrax 27 and 29 - - - - A A

Ricinoleic Acid - - - - B B Shell Macome 72 - - - - A A

RJ-1 (MIL-F-25558) - - - - A A Shell Tellus #32 Pet. Base - - - - A A

RJ-4 (MIL-F-82522) - - - - B B Shell Tellus #68 - - - - A A

Rosins B1 C - – B B Shell Tellus 27 (Petroleum Base) - - - - A A

RP-1 (MIL-R-25576) - - - - A A Shell Tellus 33 - - - - A A

Rum - - - – A A Shell UMF (5% Aromatic) - - - - A A

Rust Inhibitors - - - – A A Shellac (Bleached) A A - – C C

Saccharin Solution - - - - C C Shellac (Orange) A A - – C C

Sal Ammoniac - - - - A A Silane - - - - - -

Salad Dressings B - - – A A Silicate Esters - - - - B B

Salicylic Acid B2 D A – A B Silicon Fluoride - - - - - -

Salt Brine (NaCl saturated) B1 D A A A2 A Silicon Tetrachloride - - - - - -

Santo Safe 300 - - - - D D Silicon Tetrafluoride - - - - - -

Sebacic Acid - - - - C C Silicone A A A A1 A A

Selenic Acid - - - - C C Silicone Greases - - - - A A

Selenous Acid - - - - C C Silver Bromide D D - – C C

Sewage - - - - A A Silver Chloride - - - - C C

SF 1154 GE Silicone Fluid - - - - B B Silver Cyanide - - - - C C

SF1147 GE Silicone Fluid - - - - B B Silver Nitrate D D A A A B

SF96 GE SIlicone Fluid - - - - B B Silver Plating 80-120°F - - - – A A

Shell 3XF Mine Fluid (Fire resist hydr.) - - - - A A Silver Sulfate - - - - C C

Shell Alvania Grease #2 - - - - A A Sinclair Opaline CX-EP Lube - - - - A A

Shell Carnea 19 and 29 - - - - A A Skelly, Solvent B, C, E - - - - A A

Shell Diala - - - - A A Skydrol 500 B4 - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 42: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Skydrol 7000 - - - - D D Sodium Borate (Borax) C A A A A A

Skydrol LD-4 - - - - D D Sodium Bromate - - - - C C

Soap Solutions C A A A A A Sodium Bromide D D - – C C

Socony Mobile Type A - - - - A A Sodium Carbonate D B A A A A

Socony Vacuum AMV AC781 (Grease) - - - - A A Sodium Chlorate C1 - A A C C

Socony Vacuum PD959B - - - - A A Sodium Chloride C D A A A A

Soda Ash (see Sodium Carbonate) D B A A A A Sodium Chlorite - - - - C C

Sodium (Molten) - - - - - - Sodium Chloroacetate - - - - C C

Sodium Acetate B D A A D B Sodium Chromate B B A A C C

Sodium Acid Bisulfate - - - - C C Sodium Citrate - - - - C C

Sodium Acid Fluoride - - - - C C Sodium Cyanamide - - - - C C

Sodium Acid Sulfate - - - - C C Sodium Cyanate - - - - C C

Sodium Aluminate - A - A C C Sodium Cyanide D B A A A2 A

Sodium Aluminate Sulfate - - - - C C Sodium Diacetate - - - - C C

Sodium Anthraquinone Disulfate - - - - C C Sodium Diphenyl Sulfonate - - - - C C

Sodium Antimonate - - - - C C Sodium Diphosphate - - - - C C

Sodium Arsenate - - - - C C Sodium Disilicate - - - - C C

Sodium Arsenite - - - - C C Sodium Ethylate - - - - C C

Sodium Benzoate A1 - A – C C Sodium Ferricyanide - - - - C C

Sodium Bicarbonate D C A A A A Sodium Ferrocyanide A - A – C C

Sodium Bichromate - - - - C C Sodium Fluoride B D A – C C

Sodium Bifluoride - - - - C C Sodium Fluorosilicate - - - - C C

Sodium Bisulfate D C A A A A Sodium Glutamate - - - - C C

Sodium Bisulfide - - - - C C Sodium Hydride - - - - - -

Sodium Bisulfite D D A A A A Sodium Hydrogen Sulfate - - - - C C

Sodium Bitartrate - - - - C C Sodium Hydrosulfide - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 43: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Sodium Hydrosulfite A - A – C C Sodium Persulfate - - - - C C

Sodium Hydroxide (20% ) D D A A B1 A Sodium Phenolate - - - - C C

Sodium Hydroxide (50% ) D D A A B1 A1 Sodium Phenoxide - - - - C C

Sodium Hydroxide (80% ) D D A A B1 D Sodium Phosphate (Dibasic) - - - - A A

Sodium Hydroxide, 3 Molar - - - - B B Sodium Phosphate (Mono) - - - - A A

Sodium Hypochlorite - - - - B B Sodium Phosphate (Tribasic) - - - - A A

Sodium Hypochlorite (<20% ) D D B A A1 B Sodium Plumbite - - - - C C

Sodium Hypochlorite (100% ) D D B A A1 D Sodium Polyphosphate D C A – A A

Sodium Hypophosphate - - - - C C Sodium Pyrophosphate - - - - C C

Sodium Hypophosphite - - - - C C Sodium Resinate - - - - C C

Sodium Hyposulfate D - - – – – Sodium Salicylate - - - - C C

Sodium Hyposulfite - - - - C C Sodium Salts - - - - A A

Sodium Iodide - - - - C C Sodium Sesquisilicate - - - - - -

Sodium Lactate - - - - C C Sodium Silicate A A A A A A

Sodium Metaphosphate C D A – A A Sodium Silicofluoride - - - - - -

Sodium Metasilicate D B A – C C Sodium Stannate - - - - C C

Sodium Methylate - - - - C C Sodium Sulfate A B A A A A

Sodium Monophosphate - - - - C C Sodium Sulfide D B A A A A

Sodium Nitrate B B A A A B Sodium Sulfite C1 C A – A A

Sodium Oleate - - - - C C Sodium Sulfocyanide - - - - C C

Sodium Orthosilicate - - - - C C Sodium Tartrate - - - - C C

Sodium Oxalate - - - - C C Sodium Tetraborate C A A – C C

Sodium Perborate C C A – A B Sodium Tetraphosphate - - - - C C

Sodium Percarbonate - - - - C C Sodium Tetrasulfide - - - - C C

Sodium Perchlorate - - - - C C Sodium Thioarsenate - - - - C C

Sodium Peroxide C C A – A B Sodium Thiocyanate - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 44: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Sodium Thiosulfate (hypo) A D A A B B Stearic Acid B D A – A1 B

Sodium Trichloroacetate - - - - C C Stoddard Solvent A A A A A A

Sodium Triphosphate - - - - C C Strontium Acetate - - - - C C

Solvesso 100, 150 - - - - - - Strontium Carbonate - - - - C C

Sorbitol - - - - C C Strontium Chloride - - - - C C

Sorghum - - - – A A Strontium Hydroxide - - - - C C

Sour Natural Gas - - - - C C Strontium Nitrate - - - - C C

Sovasol No. 1, 2, and 3 - - - - A A Styrene A C A – D D

Sovasol No. 73 and 74 - - - - B B Succinic Acid - - - - C C

Soy Sauce A - - – A A Sucrose Solutions - - - - A A

Spry - - - - A A Sugar (Liquids) A A - – A A

Stannic Ammonium Chloride - - - - C C Sulfamic Acid - - - - C C

Stannic Chloride D D A A A A Sulfanilic Acid - - - - C C

Stannic Chloride, 50% - - - - A A Sulfanilic Chloride - - - - B B

Stannic Fluoborate - - - – A A Sulfanilimide - - - - B B

Stannic Tetrachloride - - - - C C Sulfate (Liquors) D D - – A1 A2

Stannous Bisulfate - - - - C C Sulfite Liquors - - - - C C

Stannous Bromide - - - - C C Sulfolane - - - - B B

Stannous Chloride D D A A1 A A Sulfonic Acid - - - - C C

Stannous Fluoride - - - - C C Sulfonyl Choride - - - - C C

Stannous Sulfate - - - - C C Sulfur - - - - D D

Starch A A A – A A Sulfur (Molten) - - - - D D

Stauffer 7700 - - - - B B Sulfur Chloride D D A – A D

Steam Below 400°F - - - - D D Sulfur Dioxide B D A A A D

Steam, 400° - 500°F - - - - D D Sulfur Dioxide (dry) B A A A D D

Steam, Above 500°F - - - - - - Sulfur Dioxide, Liquidified under pressure - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 45: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Sulfur Dioxide, Wet - - - - D D Tannic Acid C D - A A A

Sulfur Hexafluoride - - A – C B Tanning Liquors A - - – A B1

Sulfur Liquors - - - - B B Tar, bituminous - - - - B B

Sulfur Monochloride - - - - A A Tartaric Acid B1 D A A A A

Sulfur Tetrafluoride - - - - - - Tellone II - - - - - -

Sulfur Trioxide A C A – A D Terephthalic Acid - - - - C C

Sulfur Trioxide (dry) A A A – D D Terpineol - - - - B B

Sulfuric Acid (<10% ) D D A A A A1 Terpinyl Acetate - - - - B B

Sulfuric Acid (10-75% ) D D D A A2 B1 Tertiary Amyl Methyl Ether (TAME) - - - - - -

Sulfuric Acid (20% Oleum) - - - - C C Tertiary Butyl Catechol or p-tert-butylcatechol - - - - D D

Sulfuric Acid (75-100% ) D D D A1 A1 C Tertiary Butyl Mercaptan - - - - D D

Sulfuric Acid (cold concentrated) B D D A1 - - Tetrabromoethane - - - - D D

Sulfuric Acid (hot concentrated) D D D D D D Tetrabromomethane - - - - B B

Sulfuric Acid, 3 Molar to 158°F - - - - B B Tetrabutyl Titanate - - - - B B

Sulfuric Chlorohydrin (Chlorosulfonic Acid) - - - - C C Tetrachloroethane C B - – D D

Sulfurous Acid B1 D A A A B Tetrachloroethylene - A A – A D

Sulfuryl Chloride - - - – – – Tetraethyl Lead - - - - B B

Sunoco #3661 - - - - A A Tetraethyl Lead “Blend” - - - - B B

Sunoco All purpose grease - - - - A A Tetraethyl Orthosilicate (TEOS) - - - - - -

Sunoco SAE 10 - - - - A A Tetrahydrofuran - A A A D D

Sunsafe (Fire resist. hydr. fluid) - - - - A A Tetrahydrothiophen - - - - - -

Super Shell Gas - - - - A A Tetralin - - - - D D

Surfuryl Chloride - - - - C C Tetramethyl Ammonium Hydroxide - - - - C C

Swan Finch EP Lube - - - - A A Tetramethylcyclotetrasiloxane (TMCTS) - - - - - -

Swan Finch Hypoid-90 - - - - A A Tetramethyldihydropyridine - - - - B B

Tallow A C A – A A Tetraphosphoglucosate - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 46: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Tetraphosphoric Acid - - - - - - Tidewater Multigear, 140 EP Lube - - - - A A

Tetrasodium Pyrophosphate - - - - - - Tin Ammonium Chloride - - - - C C

Texaco Capella A and AA - - - - A A Tin Chloride - - - - A A

Texaco Meropa 220 (No Lead) - - - - A A Tin Salts D - A – A A

Texaco Regal B - - - - A A Tin Tetrachloride - - - - A A

Texaco Uni-Temp Grease - - - - A A Tin-Fluoborate Plating 100°F - - - – A B

Texamatic “A” 1581 Fluid - - - - A A Tin-Lead Plating 100°F - - - – A B

Texamatic “A” 3401 Fluid - - - - A A Titanic Acid - - - - C C

Texamatic “A” 3525 Fluid - - - - A A Titanium Chloride - - - - - -

Texamatic “A” 3528 Fluid - - - - A A Titanium Dioxide - - - - C C

Therminol 44 - - - - D D Titanium Sulfate - - - - C C

Therminol 55 - - - - B B Titanium Tetrachloride - - - - B B

Therminol 66 - - - - - - Toluene (Toluol) A A A A D D

Therminol FR - - - - - - Toluene Bisodium Sulfite - - - - - -

Therminol VP-1, 60, 65 - - - - D D Toluene Diisocyanate (TDI) - - - - D D

Thio Acid Chloride - - - - - - Toluene Sulfonyl Chloride - - - - B B

Thiodiacetic Acid - - - - C C Toluenesulfonic Acid - - - - C C

Thioethanol - - - - C C Toluidine - - - - B B

Thioglycolic Acid - - - - C C Toluol - - - - C C

Thiokol TP-90B - - - - D D Toluquinone - - - - B B

Thiokol TP-95 - - - - D D Tolylaldehyde - - - - C C

Thionyl Chloride - - - - B B Tomato Juice A D - A A A

Thiophene (Thiofuran) - - - - B B Toothpaste - - - - A A

Thiophosphoryl Chloride - - - - C C Transmission Fluid Type A - - - - A A

Thiourea - - - - C C Triacetin - - - - B B

Thorium Nitrate - - - - C C Triaryl Phosphate - - - - D D

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 47: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Tribromomethylbenzene - - - - B B Trifluoroacetic Acid - - - - C C

Tributoxyethyl Phosphate - - - - D D Trifluoroethane (R-23) - - - - D D

Tributyl Citrate - - - - C C Trifluoromethane - - - - D D

Tributyl Mercaptan - - - - D D Trifluorovinylchloride - - - - B B

Tributyl Phosphate - - - - D D Triisopropylbenzylchloride - - - - B B

Tributylamine - - - - - - Trimethylamine (TMA) - - - - C C

Trichloroacetic Acid D D - A C B Trimethylbenzene - - - - B B

Trichloroacetyl Chloride - - - - B B Trimethylborate (TMB) - - - - B B

Trichlorobenzene - - - - B B Trimethylpentane - - - - A A

Trichloroethane D B A – A D Trinitrololuene (TNT) - - - - D D

Trichloroethanolamine - - - - C C Trioctyl Phosphate - - - - D D

Trichloroethylene D B A A1 A C Triphenylphosphite - - - - C C

Trichloromethane - - - - D D Tripoly Phosphate - - - - D D

Trichloronitromethane (Chloropicrin) - - - - C C Tripotassium Phosphate - - - - C C

Trichlorophenylsilane - - - - - - Trisodium Phosphate D A A A C C

Trichloropropane D A - – A D Tritium - - - - - -

Trichlorosilane - - - - D D Tungsten Hexafluoride - - - - - -

Tricresyl Phosphate - - - - D D Tungstic Acid - - - - - -

Tricresylphosphate D A - – A2 D Turpentine A B A A A A

Triethanol Amine - - - - C C Ucon Hydrolube J-4 - - - - A A

Triethyl Phosphate - - - - B B Ucon Lubricant 50-HB-100 - - - - A A

Triethylaluminum - - - - - - Ucon Lubricant 50-HB-260 - - - - A A

Triethylamine - - - – D C Ucon Lubricant 50-HB-5100 - - - - A A

Triethylborane - - - - - - Ucon Lubricant 50-HB55 - - - - A A

Triethylene Glycol - - - - C C Ucon Lubricant 50-HB-660 - - - - A A

Triethylenetetramine - - - - C C Ucon Lubricant LB-1145 - - - - A A

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 48: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Ucon Lubricant LB-135 - - - - A A Vinyl Acetate A1 C - – C B

Ucon Lubricant LB-285 - - - - A A Vinyl Benzene - - - - B B

Ucon Lubricant LB-300X - - - - A A Vinyl Benzoate - - - - B B

Ucon Lubricant LB-625 - - - - A A Vinyl Chloride B1 A A – A B

Ucon Lubricant LB-65 - - - - A A Vinyl Fluoride - - - - B B

Undecylenic Acid - - - - B B Vinylidene Chloride - - - - B B

Undecylic Acid - - - - B B Vinylpyridine - - - - B B

Univis 40 (Hydr. Fluid) - - - - A A Vitriol (White) - - - - C C

Unsymmetrical Dimethyl Hydrazine (UDMH) - - - - B B VV-H-910 - - - - C C

UPDI(Ultrapure Deionized Water) - - - - C C Wagner 21B Brake Fluid - - - - C C

Uranium Hexachloride - - - - - - Water - Acid, Mine D D - - A A

Uranium Hexafluoride - - - - - - Water - Deionized A2 A - - A A

Uranium Sulfate - - - - - - Water - Distilled A D A - A A

Urea B B A A A B Water - Fresh B D A - A A

Uric Acid D - - – C C Water - Salt B D A - A A

Urine B B - – A1 A1 WATER - Sea Water B D A - A A

V V-L-825 - - - - A A WATER - White Water (Paper Mill) - - - - A A

Valeraldehyde - - - - C C Weed Killers D - - – A A

Valeric Acid - - - - C C Wemco C - - - - A A

Vanadium Oxide - - - - A A Whey B - - – A A

Vanadium Pentoxide - - - - A A Whiskey & Wines C1 D A – A A

Varnish A C A – A B White Liquor (Pulp Mill) B C - – A A

Vegetable Juice D B - – A A2 Wolmar Salt - - - - A A

Versilube F44, F55 - - - - A A Xenon - - - - A A

Versilube F-50 - - - - A A Xylene A1 A A A A D

Vinegar D C A A C B Xylidenes-Mixed-Aromatic Amines - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)

Page 49: CHEMICAL / FLUID COMPATIBILITY TABLES Pumps - Fluid Compatibility... · 2017-12-20 · Added consideration must be given to pump selections when the cheical is abrasive, viscous in

PUMP WETTED COMPONENTSPUMP HOUSING ● ●

PUMP SHAFTS and BYPASS SPRING ● ●

PUMP IMPELLERS, VANES, VANE SPRINGS ● ●

PUMP BYPASS CAP AND PLUNGER ● ●

PUMP SHAFT LIP SEALS ● ●

PUMP HOUSING O-RINGS ● ● ● ●

PUMP BYPASS CAP O-RING AND PUMP HOUSING O-RING ● ●

CHEMICAL / FLUID COMPATIBILITY

CHEMICAL / FLUID Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Alum

inum

Carb

on S

teel

Prop

rieta

ry E

ngin

eere

d Re

sinPP

S (P

olyp

heny

lene S

ulfid

e)

Flur

ocar

bon

Nitri

le

Standard Standard

These recommendations are based upon information from material suppliers and careful examination of available published information and are believed to be accurate. However, since the resistance of metals, plastics and elastomers can be affected by concentration, temperature, presence of other chemicals and other factors, this information should be considered as a general guide rather than an unqualified guarantee. Ultimately, the customer must determine the suitability of the pump used in various solutions. All recommendations assume ambient temperatures unless otherwise noted. The ratings for these material are based upon the chemical resistance only. Added consideration must be given to pump selections when the cheical is abrasive, viscous in nature or has a Specific Gravity greater than 1.1.

FLUID COMPATIBILITY TABLESRev 122017

Xylol - - - - D D Zirconium Nitrate - - - - A A

Zeolites - - - - A A

Zinc Acetate - - - - B B

Zinc Ammonium Chloride - - - - C C

Zinc Bromide Completion Fluid - - - - - -

Zinc Chloride D D A A A A

Zinc Chromate - - - - C C

Zinc Cyanide - - - - C C

Zinc Diethyldithiocarbamate - - - - C C

Zinc Dihydrogen Phosphate - - - - C C

Zinc Fluorosilicate - - - - - -

Zinc Hydrosulfite D - - A C C

Zinc Naphthenate - - - - - -

Zinc Nitrate - - - - A A

Zinc Oxide - - - - A A

Zinc Phenolsulfonate - - - - C C

Zinc Phosphate - - - - A A

Zinc Plating: Acid Chloride 140°F - - - – A A

Zinc Plating: Acid Fluoborate Bath R.T. - - - – A B

Zinc Plating: Acid Sulfate Bath 150°F - - - – A A

Zinc Plating: Alkaline Cyanide Bath R.T. - - - – A A

Zinc Salts - - - - A A

Zinc Silicofluoride - - - - - -

Zinc Stearate - - - - C C

Zinc Sulfate D D A A A A

Zinc Sulfide - - - - C C

Compatibility Rating Definition:"A": No effect - Excellent "B": Minor "C": Moderate effect - Fair "D": Severe effect - Not Recommended

"1" ‐ Satisfactory to 72°F (22°C)

"2" ‐ Satisfactory to 120°F (48°C)