chapter 2 bonding - university of tennesseeprack/mse201/chapter 2 bonding.pdf · 3 introduction to...
TRANSCRIPT
1
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 1
• Review of Atomic StructureElectrons, Protons, Neutrons, Quantum mechanics of atoms, Electron states, The Periodic Table
• Atomic Bonding in SolidsBonding Energies and Forces
• Periodic Table
• Primary Interatomic BondsIonicCovalentMetallic
• Secondary Bonding (Van der Waals)Three types of Dipole Bonds
• Molecules and Molecular Solids
Chapter Outline
Understanding of interatomic bonding is the first step towards understanding/explaining materials properties
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 2
Atoms = nucleus (protons and neutrons) + electrons
Review of Atomic Structure
Charges:Electrons (-) and protons (+) have negative and positive charges of the same magnitude, 1.6 × 10-19 Coulombs.Neutrons are electrically neutral.
Masses:Protons and Neutrons have the same mass, 1.67 × 10-27 kg.Mass of an electron is much smaller, 9.11 × 10-31 kg and can be neglected in calculation of atomic mass.
# protons gives chemical identification of the element# protons = atomic number (Z)# neutrons defines isotope number
The atomic mass (A) = mass of protons + mass of neutrons
2
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 3
Atomic mass units. Atomic weight.
The atomic mass unit (amu) is often used to express atomic weight. 1 amu is defined as 1/12 of the atomic mass of the most common isotope of carbon atom that has 6 protons (Z=6) and six neutrons (N=6).
Mproton ≈ Mneutron = 1.66 x 10-24 g = 1 amu.
The atomic mass of the 12C atom is 12 amu.
The atomic weight of an element = weighted average of the atomic masses of the atoms naturally occurring isotopes. Atomic weight of carbon is 12.011 amu.
The atomic weight is often specified in mass per mole.
A mole is the amount of matter that has a mass in grams equal to the atomic mass in amu of the atoms (A mole of carbon has a mass of 12 grams).
The number of atoms in a mole is called the Avogadronumber, Nav = 6.023 × 1023.
Nav = 1 gram/1 amu.
Example:Atomic weight of iron = 55.85 amu/atom = 55.85 g/mol
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 4
The number of atoms per cm3, n, for material of density d (g/cm3) and atomic mass M (g/mol):
n = Nav × d / M
Graphite (carbon): d = 2.3 g/cm3, M = 12 g/mol n = 6×1023 atoms/mol × 2.3 g/cm3 / 12 g/mol = 11.5 × 1022
atoms/cm3
Diamond (carbon): d = 3.5 g/cm3, M = 12 g/mol n = 6×1023 atoms/mol × 3.5 g/cm3 / 12 g/mol = 17.5 × 1022
atoms/cm3
Water (H2O) d = 1 g/cm3, M = 18 g/mol n = 6×1023 molecules/mol × 1 g/cm3 / 18 g/mol = 3.3 × 1022
molecules/cm3
For material with n = 6 × 1022 atoms/cm3 we can calculate mean distance between atoms L = (1/n)1/3 = 0.25 nm.
the scale of atomic structures in solids – a fraction of 1 nm or a few A.
Some simple calculations
3
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 5
Electrons in Atoms (I)
Electrons move not in circular orbits, but in odd shaped “orbitals” depending on their quantum numbers.
Only certain “orbits” or shells of electron probability densities are allowed. The shells are identified by a principal quantum number n, which can be related to the size of the shell, n = 1 is the smallest; n = 2, 3 .. are larger. The second quantum number l, defines subshells within each shell. Two more quantum numbers characterize states within the subshells.
The electrons form a cloud around the nucleus, of radius of 0.05 – 2 nm.
This “Bohr” picture looks like a mini planetary system. But quantum mechanics tells us that this analogy is not correct:
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 6
Quantum Rules
• n can take any positive integer value• l can take any integer value between
0 and n-1. Therefore there are n possible values of l for a given n
• ml can take any integer value between - l and + l. Thus there are (2 l +1) values of ml for a given l
• ms can take two values: ±1/2• Thus for any given value of l (an
electron subshell) there are 2(2 l +1) electrons; for any given value of n (an electron shell) there are Σ2(2 l+1) electrons (add up all the subshells)
4
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 7
Recall Isotopes
C12 where 12 = 6 Protons + 6 NeutronsC13 where 13 = 6 Protons + 7 Neutrons (Isotope)Isotopic abundance of C13 ≈ 1.1 %Carbon: 12.01 g/molAtoms having the same atomic number but varying numbers of neutrons are isotopes
Mass of basic particles:Particle Charge Mass (amu*) (1.66x10-24 or 1/Nav)Proton +1 1.00814 (1.6734x10-24g)Neutron 0 1.00898 (1.675x10 -24g)Electron -1 0.00055 (0.000911x10 -24g)The atomic mass unit (amu) is the basic unit of measurementof an atom’s mass, one amu = (1/12)*12C6 (1 amu = 1.660420 x 10 -24g)
Atomic Structure
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 8
Electrons in Atoms (II)
The quantum numbers arise from solution ofSchrodinger’s equation
Pauli Exclusion Principle: only one electron can have a given set of the four quantum numbers.
The Number of Available Electron States in Some of the Electron Shells and Subshells
5
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 9
Electrons in Atoms (III)
Electrons that occupy the outermost filled shell – the valence electrons – they are responsible for bonding.
Electrons fill quantum levels in order of increasing energy (due to electron penetration)
Example: Iron, Z = 26: 1s22s22p63s23p63d64s2
Subshells by energy: 1s,2s,2p,3s,3p,4s,3d,4s,4p,5s,4d,5p,6s,4f,…
1s2s sp3s 3p 3d4s 4p 4d 4f5s 5p 5d 5f6s 6p 6d7s 7p
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 10
6
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 11
Draft of the periodic table,Mendeleev, 1869
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 12
Elements in the same column (Elemental Group) share similar properties. Group number indicates the number of electrons available for bonding.
0: Inert gases (He, Ne, Ar...) have filled subshells: chem. inactive
IA: Alkali metals (Li, Na, K…) have one electron in outermost occupied s subshell - eager to give up electron – chem. active
VIIA: Halogens (F, Br, Cl...) missing one electron in outermost occupied p shell - want to gain electron - chem. active
General Periodic Table: Metals and Non- Metals
7
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 13
Periodic Table - Electronegativity
Electronegativity - a measure of how willing atoms are to accept electrons
Subshells with one electron - low electronegativitySubshells with one missing electron -high electronegativity
Electronegativity increases from left to right
Metals are electropositive – they can give up their few valence electrons to become positively charged ions
The electronegativity values.
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 14
Bonding Energies and Forces
repulsion
equilibrium
attraction
This is typical potential well for two interacting atoms
The repulsion between atoms, when they are brought close to each other, is related to the Pauli principle: when the electronic clouds surrounding the atoms starts to overlap, the energy of the system increases abruptly.
The origin of the attractive part, dominating at large distances, depends on the particular type of bonding.
Pote
ntia
l Ene
rgy,
E
0
8
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 15
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 16
But what does it mean?? Bonding Behavior
(a) High melting temperature, high elastic modulus, low thermal expansion coefficient
(b) Low melting temperature, low elastic modulus, high thermal expansion coefficient
9
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 17
Relevant Equations
Coulombic Attraction Force – Oppositely Charged IonsFc = K/r
2, r = atomic separation distance between ion centersK = - k0 (Z1q)(Z2q), q = 1.6 x 10-19 coulomb/unit chargeZ = valence of the ion (+1,+2,+3,-1,-2,-3…)∴Fc = - [k0 (Z1q)(Z2q)] / r2
Repulsive ForceFR = λe-a/p λ,p are constantsAt equilibrium: FN = 0 = FA + FR = 0, ∴ FA = -FR
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 18
The electron volt (eV) – energy unit convenient for description of atomic bonding
Electron volt - the energy lost / gained by an electron when it is taken through a potential difference of one volt.
E = q × V
For q = 1.6 x 10-19 CoulombsV = 1 volt
1 eV = 1.6 x 10-19 J
10
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 19
Types of Bonding
Primary bonding: e- are transferred or shared Strong (100-1000 KJ/mol or 1-10 eV/atom)
Ionic: Strong Coulomb interaction among negative atoms (have an extra electron each) and positive atoms (lost an electron). Example - Na+Cl-
Covalent: electrons are shared between the molecules, to saturate the valency. Example - H2
Metallic: the atoms are ionized, loosing some electrons from the valence band. Those electrons form a electron sea, which binds the charged nuclei in place
Secondary Bonding: no e- transferred or shared Interaction of atomic/molecular dipoles Weak (< 100 KJ/mol or < 1 eV/atom)
Fluctuating Induced Dipole (inert gases, H2, Cl2…)
Permanent dipole bonds (polar molecules - H2O, HCl...)
Polar molecule-induced dipole bonds (a polar molecule like induce a dipole in a nearby nonpolar atom/molecule)
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 20
Ionic Bonding (I)Formation of ionic bond:1. Mutual ionization occurs by electron transfer
(remember electronegativity table)• Ion = charged atom• Anion = negatively charged atom• Cation = positively charged atom
2. Ions are attracted by strong coulombic interaction• Oppositely charged atoms attract• An ionic bond is non-directional (ions may be attracted
to one another in any direction
Example: NaCl11 Protons NaElectron Configuration?
17 Protons Cl
Electron Configuration?
Na (metal) unstable
Cl (nonmetal) unstable
electron
+ - Coulombic Attraction
Na (cation) stable
Cl (anion) stable
11
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 21
Ionic Bonding (II)
• Electron transfer reduces the energy of the system of atoms, that is, electron transfer is energetically favorable
• Note relative sizes of ions: Na shrinks and Cl expands
Na Cle-
Na+ Cl-
Ionic bonds: very strong, nondirectional bonds
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 22
Predominant bonding in Ceramics
Give up electrons Acquire electrons
He -
Ne -
Ar -
Kr -
Xe -
Rn -
F 4.0
Cl 3.0
Br 2.8
I 2.5
At 2.2
Li 1.0
Na 0.9
K 0.8
Rb 0.8
Cs 0.7
Fr 0.7
H 2.1
Be 1.5
Mg 1.2
Ca 1.0
Sr 1.0
Ba 0.9
Ra 0.9
Ti 1.5
Cr 1.6
Fe 1.8
Ni 1.8
Zn 1.8
As 2.0
CsCl
MgO
CaF2
NaCl
O 3.5
Adapted from Fig. 2.7, Callister 6e. (Fig. 2.7 is adapted from Linus Pauling, The Nature of the Chemical Bond, 3rd edition, Copyright 1939 and 1940, 3rd edition. Copyright 1960 by CornellUniversity.
12
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 23
Crystal structure is defined byMagnitude of the electrical charge on each ion. Charge balance dictates chemical formula (Ca2+ and F- form CaF2).Relative sizes of the cations and anions. Cations wants maximum possible number of anion nearest neighbors and vice-versa.
Crystal Structures in Ceramics with predominantly ionic bonding
Stable ceramic crystal structures: anions surrounding a cation are all in contact with that cation. For a specific coordination number there is a critical or minimum cation-anion radius ratio rC/rA for which this contact can be maintained.
Ionic Bonding (III)
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 24
Covalent Bonding (I)
In covalent bonding, electrons are shared between the molecules, to saturate the valency. The simplest example is the H2 molecule, where the electrons spend more time in between the nuclei than outside, thus producing bonding.
Formation of covalent bonds:
• Cooperative sharing of valence electrons
• Can be described by orbital overlap
• Covalent bonds are HIGHLY directional
• Bonds - in the direction of the greatest orbital overlap
• Covalent bond model: an atom can covalently bond with at most 8-N’, N’ = number of valence electrons
Example: Cl2 molecule. ZCl =17 (1S2 2S2 2P6 3S2 3P5)N’ = 7, 8 - N’ = 1 → can form only one covalent bond
13
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 25
Whereas the metallic and ionic CN is based on size and hard spherePacking, covalent bonding is based on a different set of rules.Hard sphere model r/R CN(ionic, metallic) 0.732≤r/R<1 8
r/R = 1 12•Covalent bond model: 8-N, N = number of valence electronsEl. Config. X’tal structure # valence e- 8-NC (1S)2 2S2 2P2 diamond cubic 4 4Si ..3S2 3P2 diamond cubic 4 4GaAs Ga ..4S2 4P1 zinc blend 4 average 4
As.. 4S2 4P3
Covalent Bonding (II)
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 26
Covalent Bonding (III)
Example: Carbon materials. Zc = 6 (1S2 2S2 2P2)N’ = 4, 8 - N’ = 4 → can form up to four covalent bonds
ethylene molecule:
polyethylene molecule:
ethylene mer
diamond: (each C atom has four covalent bonds with four other carbon atoms)
14
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 27
Example: Hybridization•Diamond if covalently-bonded carbon•Expected CN=12 (if ionic, equal sizes, r/R = 1)•Observed CN=4 (“tetrahedral” coordination)Explanation: directional bonding•Outer shell electrons 2s and 2p hybridize to form 4equally-spaced orbitals•Reason: greater orbital overlap possible
Covalent Bonding (IV)
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 28
He -
Ne -
Ar -
Kr -
Xe -
Rn -
F 4.0
Cl 3.0
Br 2.8
I 2.5
At 2.2
Li 1.0
Na 0.9
K 0.8
Rb 0.8
Cs 0.7
Fr 0.7
H 2.1
Be 1.5
Mg 1.2
Ca 1.0
Sr 1.0
Ba 0.9
Ra 0.9
Ti 1.5
Cr 1.6
Fe 1.8
Ni 1.8
Zn 1.8
As 2.0
SiC
C(diamond)
H2O
C 2.5
H2
Cl2
F2
Si 1.8
Ga 1.6
GaAs
Ge 1.8
O 2.0
co
lum
n IV
A
Sn 1.8Pb 1.8
Adapted from Fig. 2.7, Callister 6e. (Fig. 2.7 isadapted from Linus Pauling, The Nature of the Chemical Bond, 3rd edition, Copyright 1939 and 1940, 3rd edition. Copyright 1960 by Cornell University.
EXAMPLES: COVALENT BONDING
15
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 29
Metallic Bonding (I)
Valence electrons are detached from atoms, and spread in an 'electron sea' that "glues" the ions together.
• A metallic bond is non-directional (bonds form in any direction) → atoms pack closely
ion core
Electron cloud from valence electrons
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 30
Metallic Bonding (II)
16
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 31
Secondary Bonding (I)
Secondary = van der Waals = physical (as opposed to chemical bonding that involves e- transfer) bonding results from interaction of atomic or molecular dipoles and is weak, ~0.1 eV/atom or ~10 kJ/mol.
Arises from interaction between dipoles
• Permanent dipoles-molecule induced
• Fluctuating dipoles
+ - secondary bonding + -
H Cl H Clsecondary bonding
secondary bonding
HH HH
H2 H2
secondary bonding
ex: liquid H2asymmetric electron clouds
+ - + -secondary
bonding
-general case:
-ex: liquid HCl
-ex: polymer
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 32
Secondary Bonding (II)
Example: hydrogen bond in water. The H end of the molecule is positively charged and can bond to the negative side of another H2O molecule (the O side of the H2O dipole)
“Hydrogen bond” – secondary bond formed between two permanent dipoles in adjacent water molecules.
O
H H
Dipole
++
-
17
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 33
Secondary Bonding (III)
Hydrogen bonding in liquid water from a molecular-level simulation
Molecules: Primary bonds inside, secondary bonds among each other
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 34
Secondary Bonding (IV)
The Crystal Structures of Ice
Hexagonal Symmetry of Ice Snowflakes
Figures by Paul R. Howell
18
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 35
15
• Bond length, r
• Bond energy, Eo
F F
r
• Melting Temperature, Tm
Tm is larger if Eo is larger.
PROPERTIES FROM BONDING: TM
Eo=
“bond energy”
Energy (r)
ro r
unstretched length
r
larger Tm
smaller Tm
Energy (r)
ro
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 36
16
• Elastic modulus, E
• E ~ curvature at ro
E is larger if Eo is larger.
PROPERTIES FROM BONDING: E
cross sectional area Ao
∆L
length, Lo
F
undeformed
deformed
∆L F Ao
= E Lo
Elastic modulus
r
larger Elastic Modulus
smaller Elastic Modulus
Energy
ro unstretched length
19
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 37
17
• Coefficient of thermal expansion, α
• α ~ symmetry at ro
α is larger if Eo is smaller.
PROPERTIES FROM BONDING: α
∆L
length, Lo
unheated, T1
heated, T2
�
= α (T2-T1) ∆L Lo
coeff. thermal expansion
r
smaller α
larger α
Energy
ro
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 38
18
Ceramics
(Ionic & covalent bonding):
Metals
(Metallic bonding):
Polymers
(Covalent & Secondary):
secondary b
Large bond energylarge Tm
large Esmall α
Variable bond energymoderate Tm
moderate Emoderate α
Directional PropertiesSecondary bonding dominates
small Tsmall Elarge α
SUMMARY: PRIMARY BONDS
20
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 39
Summary (II)
Introduction To Materials Science, Chapter 2, Atomic Structure -Interatomic Bonding
University of Tennessee, Dept. of Materials Science and Engineering 40
Summary (III)
Atomic mass unit (amu) Atomic number Atomic weight Bonding energyCoulombic force Covalent bond Dipole (electric) Electron state Electronegative Electropositive Hydrogen bond Ionic bond Metallic bond Mole Molecule Periodic table Polar molecule Primary bonding Secondary bondingVan der Waals bond Valence electron
Make sure you understand language and concepts: