catalogo molluschicoltura eng.cdr:coreldraw - pescanet molluschicoltura eng.cdr-coreldraw.pdf ·...
TRANSCRIPT
SHELLFISH FARMING
TECHNOSEA srlÒ
Sede Legale/Registered Office: Strada Com. del Procaccio - 72010 Torre Canne di Fasano (BR) - ITALY
Ufficio Commerciale/Sales Office: Via delle Antille, 29 - 00040 POMEZIA (ROMA) - ITALY
Tel/fax +39.06.9123335 - +39.06.91612313
Email: [email protected] - Web: www.technosea.com
TECH ON SEAAQUACULTURE PROFESSIONAL RESOURCES
Concrete block
Ground chain
Deepwater buoy
Hanging equipment
Mooring line float
Mooring rope
Longline
Intermediate floats
SHELLFISH FARMING IN LONGLINE
SYSTEM
TECHNOSEA srl is a leading Italian Company in Fish
and Shellfish Farming Equipment Supply.
TECHNOSEA srl offers services of designing for
systems of mussel, oyster, scallop and clam
farming in floating, sub-floating and submersed
long-lines. The latter, of Scottish origin, is mainly
used for offshore farming.
POLYETHYLENE FLOATS FOR LONG_LINES SYSTEM IN MUSSEL FARMING
The buoys can be supplied with compressed air fillings (1.5 bar) and safety valve, with
expanded polysthyrene filling for a max 5-mt use or with fillings in expanded closed
cell polyurethane for in depth use. The floating thrusts available are 60, 80, 115, 160
and 180 lts/buoyancy. The 115 lts type is normally used as interline float and the 160
lts one as head-link float.
FULLY EQUIPPED SERVICE BOATS
TECHNOSEA srl employs professional engineers with proven experience to design and supply fully
equipped boats especially tailored for oyster and mussel farming as catamaran type.
It is possible to supply accessories only.
ROPES AND BRAIDS
On request, twisted ropes with 3 or
4 strands, are available in:
Polypropylene, Danline, Nylon
(Polyamide), Polyester.
Braids and double braids with and
without core in: High and Medium
Tenacity polyster, Dyneema.
NAVIGATIONALAIDSFORCOASTAL AREA
The buoys are manufactured by TECHNOSEA srl in steel
and treated externally with sandblast and yellow
polyurethane marine paints, in compliance with current
regulations. The buoys is surmounted by a top mark
traceable through radars and a SEALITE�s marine lantern.
The solar energy marine lantern has been designed to
function without need for maintenance: they neither need
batteries nor bulb change and need no technical
assistance. They recharge in daylight, even when cloudy,
by emitting a flashing light with can be adjusted at night.
Avarage life of lights is between 5 and 8 years without
any maintenance.
Technical document such as drawning, descriptions,
pictures or even possible indications on property,
dimensions or weight are to be considered merely
informative and are not binding.
TechnoSEA srl reserves its right to carry out all the
modifications wich are considered necessary in accordance
with technical progress.
TECHNOSEA srlÒ
Sede Legale/Registered Office: Strada Comunale del Procaccio - 72010 Torre Canne di Fasano (BR) - ITALY
Ufficio Commerciale/Sales Office: Via delle Antille, 29 - 00040 POMEZIA (ROMA) - ITALY
Tel/fax +39.06.9123335 - +39.06.91612313
Email: [email protected] - Web: www.technosea.com
LATERN_NET FOR OYSTER FARMING
TECHNOSEA srl presents the new TECHNOSEA-LANTERNET for the oyster farming and mollusc stocking. The
lanterns are made in polyethylene and therefore without any maintenance. The opening and the closing of
the external netting, for the inside lantern access, are regulated from a tape of high resistance-VELCRO.
So, opening and closing are simple and fast operation and at the same time the VELCRO guarantees an
optimal holding power to the tear and the aggression of the marine water.
The shelf number can be up to 15.
The dimensions of each base, made with PE net of variable meshsize, had a diametr of 355 mm, the
distances between two shelf is 150 mm approx. Other diamer base size are available on demand.
VELCRO OPENING SYSTEM
OYSTER FARMING EQUIPMENT
SEAPA BASKETS FOR OYSTER FARMING
SEAPA baskets are all manufactured using food grade, UV stabilized co-polymer polypropylene in an injection moulding machine. The
baskets are designed to produce the highest quality oyster in the least amount of time. The durability of the SEAPA baskets provides the
opportunity for cost savings for farmers as they will have to repair and replace SEAPA less frequently than traditional methods.
The baskets are quickly and easily assembled to minimise the farmers on shore expenses. For more information about the assembly of
baskets refer to the additional information menu.
Weight of 20mm basket: 381g (approx)- Weight of 12mm basket: 452g (approx)- Weight of 6mm basket: 612g (approx).Specifications:
The SEAPA standard cap is a simple design, but it is this simplicity that makes it so effective. The standard
cap is easy to attach by sliding it over the tabs on the end of the basket and then locks in place by pushing
the tab outwards. SEAPA�s standard caps are all manufactured using UV stabilized co-polymer polypropylene
in an injection moulding machine.
Weight of Standard Cap: 87g (approx).Specifications:
The SEAPA clip has evolved from the original �duck hook� design in the early days to its current design. The
changes have been made to improve the durability of the clips in rough conditions and to also improve the
ability of the clip to remain on the line in all conditions. In rough conditions, it is not unusual to see SEAPA
baskets doing �360�s� around the line, but the clips just holds tight.
Our Riser clips have also under gone a few modifications since they were first designed. Based on feedback
received from farmers we have made a few minor changes to the clips to improve its ability to hold the line,
whilst still allowing for the line to be adjusted quickly and easily.
Both our SEAPA and Riser clips are currently made from UV stabilized co-polymer polypropylene in an
injection moulding machine, however we are investigating the use of other materials that may provide even
better performance.