catalogo international 2016 - ecoscapeecoscape-ltd.com › ... ›...

UseHigh-elasticity laying of ceramic tiles, porcelain tiles, marble and natural stone, on floors and walls, on absorbent and non-absorbent, deformable substrates.

Materials:- porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, natural stone, marble, granite and recom-posed materials also subjected to staining or deformation due to water absorption and thermal expansion

Substrates:- mineral screeds such as Keracem® Eco Pronto, Keracem® Eco Prontoplus and Rekord® Eco Pronto- screeds realized with mineral binders Rekord® Eco and Keracem® Eco- cement-based screeds- prefabricated concrete or fresh concrete castings - cement plasters and cement-lime mortar- floors and walls in polyurethane resin, glazed tiles, cement-based and resin floor tiles, porcelain tiles- wood, metals, rubber, PVC, linoleum

Flooring and walls, for internal and external use, in domestic, commercial and industrial applications, for street furniture, heated subflo-ors also in areas subject to thermal shock and freezing.

Do not useIn contact with polystyrene or on substrates which are not fully cured and subjected to moisture rising.

AREAS OF USE

0003

0Sup

erfle

x Ec

o Co

de: P

325

2011

/08

EN

LAYING RANGE / Organic Mineral Adhesives for Ceramic Tiles and Natural Stone

Eco-friendly, elastic organic mineral adhesive for high-performance and high-adhesion laying with no vertical slip on deformable substrates, ideal for use in GreenBuilding. Safeguards the health of operators.

Superflex Eco develops high elasticity and thixotropy making it safe to lay water-sensitive ceramic tiles and natural stone even diagonally or from top to bottom on highly deformable and expandable, absorbent and non-absorbent substrates.

Superflex Eco

PRODUCT STRENGTHS

• Floors and walls, for internal and external use

• Open and adjustability time ≥ 1 hr

• Suitable for porcelain tiles, ceramics, large formats, low thickness slabs and natural stone

• Ideal for marble and natural stone that tends to form stains and sag in the presence of humidity

• Easy and light to spread thanks to the Light Work technology

ECO NOTES

- Formulated with locally-sourced minerals meaning lower greenhouse gas emission during transportation

- Improved on-site safety guaranteed

GREENBUILDING RATING®

RATING SYSTEM ACCREDITED BY CERTIFICATION BODY SGS

2

®

Regional Mineral ≥

30

% IAQVOCIndoor Air Qualit

y

Low Emission

Solvent ≤ 5 g/kg

SLVREDUCED

Low Ecological Im

pact

Health Care

Natural mineral content

52%Non-toxic and non-hazardous

Superflex Eco - Category: Organic Mineral Products - Class: Organic Mineral Adhesives - Rating: Eco 2

CO

MPLIANT WITH

EUROPEAN NORM

R2 TEN 12004

EN 12004

CONTRIBUTES TO

P O I N T S

KERA

KOLL MONOPACK

AB

S Y S T E M

Preparation of substrates Substrates must be compact and consistent, free from dust, oil and grease, free from any rising damp, with no loose, flaky, or imperfectly anchored parts. The substrate must be stable, without cracks and have already completed the curing period of hygrometric shrinkage. Uneven areas must be corrected with suitable smoothing and finishing products.

PreparationSuperflex Eco is prepared by mixing together parts A and B from the bottom upwards, using a low-rev (≈ 400/min.) helicoidal agitator, re-specting the preset ratio of 6,4 : 1,6 of the packs. Pour part B into the bucket containing part A, being careful to mix the two parts uniformly until a smooth, even coloured mixture is obtained. The user must mix a quantity of adhesive which can be consumed within 1 hour at +23 °C / 50% R.H. Packs of Superflex must be stored at a temperature of ≈ +20 °C for at least 2/3 days prior to use.

ApplicationSuperflex Eco must be applied with a suitable, toothed spreader of the type and dimensions most appropriate for the format and type of tiles used. Using the smooth part of the spreader, apply a fine layer of product, pressing down onto the substrate in order to ensure maximum adhesion. Press down each tile to allow for maximum coverage of the surface. In environments subjected to heavy traffic, in external applications and wherever high-elasticity laying system is required, use the double-spread technique to ensure 100% applica-tion of the product to the rear of the tiles.

CleaningResidues of Superflex Eco can be cleaned from tools and covered surfaces with water and alcohol while the adhesive is still fresh. Once cured, the adhesive can only be removed by mechanical means.

INSTRUCTIONS FOR USE

To waterproof a monolithic concrete substrate, a surface levelling coat of ≈ 2 mm thickness must be applied with the smooth part of the spreader. Then, adjust the thickness with the toothed side and apply a layer of Superflex Eco also on the back of each tile before laying.

SPECIAL NOTES

High-performance laying of porcelain tiles, marble, granite and ceramic tiles on deformable substrates must be carried out using two-component elastic, eco-friendly organic mineral adhesive with no vertical slip, compliant with EN 12004 – class R2 T, GreenBuilding Rating Eco 2, type Superflex Eco manufactured by Kerakoll. The substrate must be clean, free from any loose, flaky parts and adequately matured. A ____ mm toothed spreader must be used for an average coverage of ≈ ___ kg/m2. Create elastic fractionizing joints every ___ m2. Tiles must be laid with joints of ___ mm width.

ABSTRACT

0003

0Sup

erfle

x Ec

o Co

de: P

325

2011

/08

EN

Appearance Part A white or grey paste / Part B white pasteSpecific weight Part A ≈ 1,50 kg/dm3 / Part B ≈ 0,98 kg/dm3

Mineralogical nature of inert material silicate - crystallineGrading ≈ 0 - 100 µmShelf life ≈ 12 months in the original packagingWarning Protect from frost Avoid direct exposure to sunlight and sources of heatPack monopack 8 kg (6,4+1,6 kg)Mixing ratio Part A : Part B = 6,4 : 1,6Viscosity of the mixture ≈ 750000 mPa · s, rotor 7 RPM 5 Brookfield methodSpecific weight of the mixture ≈ 1,5 kg/dm3 Temperature range for application from +10 °C to +30 °CPot life ≥ 1 hrOpen time ≥ 1 hr EN 1346Adjustability ≥ 1 hrVertical slip ≤ 0,5 mm EN 1308Foot traffic ≈ 24 hrsGrouting ≈ 12 hrs on walls / ≈ 24 hrs on floorsInterval before normal use ≈ 3 daysCoverage * ≈ 2 - 4 kg/m2 Values taken at +23 °C, 50% R.H. and no ventilation. Data may vary depending on specific conditions at the building site, i.e.temperature, ventilation and absorbency level of the substrate and of the materials laid.(*) Can vary depending on the irregularity of the substrate and the format of the tile.

TECHNICAL DATA COMPLIANT WITH KERAKOLL QUALITY STANDARD

KERAKOLL S.p.a.Via dell’Artigianato, 9 - 41049 Sassuolo (MO) Italy Tel +39 0536 816 511 - Fax +39 0536 816 [email protected] - www.kerakoll.com

The Eco and Bio classifications refer to the GreenBuilding Rating Manual 2011. This information was last updated in August 2011 (ref. GBR Data Report - 02.11); please note that additions and/or amendments may be made over time by KERAKOLL SpA; for the latest version, see www.kerakoll.com. KERAKOLL SpA shall therefore be liable for the validity, accuracy and updating of information provided only when taken directly from its institutional website. The technical data sheet given here is based on our technical and practical knowledge. As it is not possible for us to directly check the conditions in your building yards and the execution of the work, this information represents general indications that do not bind Kerakoll in any way. Therefore, it is advisable to perform a preliminary test to verify the suitability of the product for your purposes.

HIGH-TECHShear adhesion after 7 days ≥ 5 N/mm2 EN 12003Durability test:- Shear adhesion after water immersion ≥ 5 N/mm2 EN 12003- Shear adhesion after thermal shock ≥ 3,5 N/mm2 EN 12003Adhesion to concrete after 7 days ≥ 2,5 N/mm2 (concrete yield) EN 1348Ultimate elongation ≈ 35%Working temperature from -40 °C to +110 °CConformity R2 T EN 12004

Values taken at +23 °C, 50% R.H. and no ventilation. Data may vary depending on specific conditions at the building site.

PERFORMANCE

- Product for professional use- use at temperatures between +10 °C and +30 °C - use packs which have been stored for 2/3 days before use at +20 °C- strictly keep to the mixing ratio of 6,4 : 1,6. For partial mixing, weigh the two parts precisely - Workability times may vary considerably, depending on environmental conditions and the temperature of the tiles - protect against direct rain for at least 12 hrs- Do not lay on substrates subject to moisture rising or which are not completely dry- if necessary, ask for the safety data sheet- for any other issues, contact the Kerakoll Worldwide Global Service - [email protected]

WARNING

0003

0Sup

erfle

x Ec

o Co

de: P

325

2011

/08

EN

• Floors and walls, for internal and external use

• No vertical slip

• Suitable for laying porcelain tiles, ceramic tiles and natural stone

• Good resistance to acids

• Long mixture pot life

• Easy and fast to apply

PRODUCT STRENGTHS



ECO NOTES

UseHigh chemical and mechanical resistance laying of ceramic tiles, porcelain tiles, marble and stable natural stone, on floors and walls, on absorbent and non-absorbent, rigid substrates.

Materials:- porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, natural stone, recomposed materials, marble.

Substrates:- mineral screeds such as Keracem® Eco Pronto, Keracem® Eco Prontoplus and Rekord® Eco Pronto- screeds with mineral binders Rekord® Eco and Keracem® Eco- cement-based screeds- prefabricated concrete or fresh concrete castings- cement plasters and cement-lime mortar- floors and walls in epoxy resin, fibreglass, glazed tiles and porcelain tiles, cement-based and resin floor tiles

Internal and external flooring and walls, in domestic, commercial and industrial applications, for street furniture, work surfaces in indus-trial settings or in laboratories, swimming pools, thermal water baths and fountains, also in areas subject to freezing.

Do not useIn contact with polystyrene, on plastic or resilient materials, metals and wood; on substrates that are highly deformable, not perfectly dry and subject to moisture rising.

AREAS OF USE

Epoxy Eco - Category: Organic Mineral Products - Class: Organic mineral adhesives - Rating: Eco 2



0002

9Epo

xy E

co C

ode:

P30

2 20

14/0

3 EN

LAYING RANGE / Organic mineral adhesives for ceramic tiles and natural stone

Eco-friendly, organic mineral adhesive for the high-adhesion, high chemical resistance laying with no vertical slip on rigid substrates, ideal for use in GreenBuilding. Safeguards the health of operators.

Epoxy Eco develops high levels of chemical and mechanical resistance, making it safe to lay floor and wall coverings on absorbent and non-absorbent substrates in industrial environments and thermal pools in contact with aggressive substances.

Epoxy Eco

2

®


30


y

Low Emission

Solvent ≤ 5 g/kg

SLVREDUCED

Low Ecological Im

pact

Health Care


68%

Non-toxic and non-hazardous

CO

MPLIANT WITH

EUROPEAN NORM

R2 TEN 12004

CO

NTRIBUTES TO

P O I N T SEN 12004

KERA

KOLL MONOPACK

AB

S Y S T E M

0002

9Epo

xy E

co C

ode:

P30

2 20

14/0

3 EN

Preparation of substratesSubstrates must be compact and consistent, free from dust, oil and grease, free from any moisture rising, with no loose and flaky debris or imperfectly anchored parts. The substrate must be stable, non-deformable, without cracks and have already completed the curing period of hygrometric shrinkage. Uneven areas must be corrected with suitable smoothing and finishing products.

PreparationEpoxy Eco is prepared by mixing together parts A and B from the bottom upwards, using a low-rev (≈ 400/min.) helicoidal agitator, re-specting the preset ratio of 6.4 : 1.6 in the packaging. Pour Part B into the bucket containing Part A, being careful to mix the two parts uniformly until a smooth, even coloured mixture is obtained. In any case, mix only enough adhesive that can be used in full within 1 hr at +23 ºC, 50% R.H. Packs of Epoxy Eco must be stored at a temperature of ≈ +20 °C for at least 2/3 days prior to use.

ApplicationEpoxy Eco can be applied with a suitable toothed spreader to be chosen according to the size and type of the tile. Using the smooth part of the spreader, apply a fine layer of product, pressing down onto the substrate in order to ensure maximum adhesion. Press down each tile to allow for maximum coverage of the surface. In environments subjected to heavy traffic, in external applications and wherever high chemical resistance laying system is required, use the double-spread technique to ensure 100% wettability of tile backs.

CleaningResidues of Epoxy Eco can be cleaned from tools and covered surfaces with water and alcohol while the adhesive is still fresh. Once hardened, the adhesive can only be removed by mechanical means.


Epoxy Eco is suitable for rigid bonding of special formats of ceramic and porcelain tiles and thresholds in stone.

For superior chemical resistance and waterproofing of a monolithic substrate in concrete, a surface levelling coat must be applied with the smooth part of the spreader. Then, adjust the thickness with the toothed side and apply a layer of Epoxy Eco also on the back of each tile before laying.

SPECIAL NOTES

The laying of porcelain tiles, ceramic tiles and marble with high chemical and mechanical resistance, on rigid substrates must be carried out using two-component, eco-friendly organic mineral adhesive with no vertical slip, compliant with EN 12004 – class R2 T, GreenBuilding Rating® Eco 2, type Epoxy Eco manufactured by Kerakoll. The substrate must be clean, free from any loose, flaky parts and adequately matured. A ____ mm toothed spreader must be used for an average coverage of ≈ ____ kg/m2. Create elastic fractionizing joints every ___ m2. Tiles must be laid with joints of ___ mm width.

ABSTRACT

Appearance Part A: grey paste / Part B: beige pasteSpecific weight Part A ≈ 1,68 kg/dm3 / Part B ≈ 1,76 kg/dm3

Mineralogical nature of inert material crystalline carbonateGrading ≈ 0 – 100 µmShelf life ≈ 12 months in the original packagingWarning Protect from frost and avoid direct exposure to sunlight and sources of heatPack monopack 8 kg (6,4+1,6 kg)Mixing ratio Part A : Part B = 6,4 : 1,6Viscosity of the mixture ≈ 330000 mPa · s, rotor 95 RPM 10 Brookfield methodSpecific weight of the mixture ≈ 1,69 kg/dm3

Pot life ≥ 1 hrTemperature range for application from +10 °C to +30 °COpen time ≥ 1 hr EN 1346Adjustability ≥ 1 hrVertical slip ≤ 0,5 mm EN 1308Foot traffic ≈ 24 hrsGrouting ≈ 12 hrs on walls / ≈ 24 hrs on floorsInterval before normal use ≈ 3 daysCoverage* ≈ 2 – 4 kg/m2

Values taken at +23 °C, 50% R.H. and no ventilation. Data may vary depending on specific conditions at the building site, i.e.temperature, ventilation and absorbency level of the substrate and of the materials laid.(*) Can vary depending on the irregularity of the substrate and the format of the tile.



The Eco and Bio classifications refer to the GreenBuilding Rating® Manual 2013. This information was last updated in January 2014 (ref. GBR Data Report -02.14); please note that additions and/or amendments may be made over time by KERAKOLL SpA; for the latest version, see www.kerakoll.com. KERAKOLL SpA shall therefore be liable for the validity, accuracy and updating of information provided only when taken directly from its institutional website. The technical data sheet given here is based on our technical and practical knowledge. As it is not possible for us to directly check the conditions in your building yards and the execution of the work, this information represents general indications that do not bind Kerakoll in any way. Therefore, it is advisable to perform a preliminary test to verify the suitability of the product for your purposes.

0002

9Epo

xy E

co C

ode:

P30

2 20

14/0

3 EN

- Product for professional use- abide by any standards and national regulations- use at temperatures between +10 °C and +30 °C- use packs which have been stored for 2/3 days before use at +20 °C- respect the mixing ratio of 6.4 : 1.6. For partial mixing, weigh the two parts precisely- workability times may vary considerably, depending on environmental conditions and the temperature of the tiles- protect against direct rain for at least 12 hrs- do not lay on substrates subject to moisture rising or which are not completely dry- if necessary, ask for the safety data sheet- for any other issues, contact the Kerakoll Worldwide Global Service +39 0536 811 516 - [email protected]

WARNING

HIGH-TECHShear adhesion after 7 days ≥ 5 N/mm2 EN 12003Durability test:- shear adhesion after water immersion ≥ 3,5 N/mm2 EN 12003- shear adhesion after thermal shock ≥ 6 N/mm2 EN 12003Adhesion to concrete after 7 days ≥ 3,5 N/mm2 (concrete breakage) EN 1348Resistance to acids GoodWorking temperature from -40 °C to +110 °CConformity R2 T EN 12004


PERFORMANCE

• Internal floors, internal and external walls

• Suitable for porcelain and ceramic tiles, large formats, glass mosaic, low thickness slabs and stable natural stone on mineral or cement-based substrates

• Suitable for use on absorbent, gypsum- or anhydrite-based substrates without a primer

• Ideal on wood and wood derivative substrates that are water-stable

PRODUCT STRENGTHS


- Water-based, limits the risk of loads that could be harmful and dangerous to the environment during storage and transportation


ECO NOTES

Uselaying ceramic tiles on walls and floors.

Materials:- porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats- natural stone, recomposed materials and marble not subjected to deformation or staining due to water absorption- slabs of insulating or soundproofing material

Substrates:- mineral screeds such as Keracem® Eco Pronto, Keracem® Eco Prontoplus and Rekord® Eco Pronto- screeds with mineral binders Rekord® Eco and Keracem® Eco- cement, gypsum and scagliola plasters- plasterboard, gypsum brick, concrete block and cellular concrete walls- cement-based screeds, anhydrite screeds- prefabricated concrete and fresh concrete castings- chipboard, plywood and similar materials

On internal floors and walls, even in areas which are damp or in contact with water such as bathrooms, showers and kitchens; outside walls in domestic, commercial and industrial applications or in urban spaces.

Do not useOn external floors, on wet surfaces or substrates subjected to moisture rising; in environments where water is always present; with low-absorption tiles on non-absorbent substrates.

AREAS OF USE

Elastik Eco - Category: Organic Mineral Products - Class: Organic mineral adhesives - Rating: Eco 5



0003

2Ela

stik

Eco

Cod

e: P

301

2014

/02

EN

LAYING RANGE / Organic mineral adhesives for ceramic tiles and natural stone

Certified, eco-friendly, ready-to-use organic mineral adhesive for high-adhesion, high-deformation laying with no vertical slip, ideal for use in GreenBuilding. Solvent-free and with very low volatile organic compound emissions. Safeguards the health of both operators and the environment.

Elastik Eco develops high elasticity and a long adjustability time making it possible to quickly and safely lay coverings on flexible or deformable substrates, even diagonally, without creating any tension in the covering.

Elastik Eco

5

®


30


y

Low Emission

Solvent ≤ 5 g/kg

SLVREDUCED

Low Ecological Im

pact

Health Care


69%

Very low VOC emissions Solvent-free

No environmental hazard rating


CO

MPLIANT WITH

EUROPEAN NORM

D2 TEEN 12004

EN 12004

CO

NTRIBUTES TO

P O I N T S

* ÉMISSION DANS L’AIR INT ÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions).

0003

2Ela

stik

Eco

Cod

e: P

301

2014

/02

EN

Preparation of substratesThe substrate must be even, dry, free from dust, oil and grease, free of any rising moisture, with no loose debris, flaky or parts. Uneven areas will be corrected in advance with suitable finishing products. A primer is normally not necessary when laying on gypsum or anhy-drite. Nevertheless, check that the substrate is perfectly dry, laid in a single layer and without any thin finishing, that may be imperfectly anchored and therefore not suitable for the tile covering.

PreparationElastik Eco is ready-to-use and does not need any preparation. In any case, before use it is advisable to remix the product well inside the container to ensure the mixture is of an even consistency. The high thixotropy of Elastik Eco means it can also be used on walls. Any excess adhesive can be kept for later use by putting the lid back on the container.

ApplicationElastik Eco should be applied directly to the substrate with a suitable toothed spreader; use a quantity of adhesive sufficient to ensure full tile wettability of the back. Lay tiles while the adhesive is fresh, pressing them lightly to ensure perfect adhesion. Ceramic tiles do not normally have to be wetted in advance, however check for any traces of dust or dirt.

CleaningResidual traces of Elastik Eco can be removed from tools and covered surfaces with water before the product hardens.


Elastik Eco is an adhesive dispersed in water solution. Low temperatures and low substrate and material absorption may greatly extend setting and hardening times of the adhesive.Expansion and desolidarisation joints must be foreseen every 20/25 m2 in interiors, 10/15 m2 in exterior and any 8 meters in length for long and narrow surfaces.

SPECIAL NOTES

Certified, high-performance laying of ceramic tiles, porcelain tiles and marble must be performed with a ready-to-use, eco-friendly, organic, mineral adhesive for high-deformation laying with no vertical slip, compliant with EN 12004 – Class D2 TE, GreenBuilding Rating® Eco 5, such as Elastik Eco by Kerakoll Spa. A ____ mm toothed spreader must be used for an average coverage of ≈ ___ kg/m2. Existing joints must be respected, create elastic fractionizing joints every ___ m2. Tiles must be laid with joints of ___ mm width.

ABSTRACT

Appearance White pasteSpecific weight ≈ 1,74 kg/dm3

Mineralogical nature of inert material crystalline carbonateGrading ≈ 0 – 200 µmShelf life ≈ 12 months in the original packagingWarning Protect from frost, avoid direct exposure to sunlight and sources of heatPack 25 - 15 - 5 kg bucketsViscosity ≈ 600,000 mPa · s, rotor 93 RPM 1 Brookfield methodTemperature range for application from +5 °C to +35 °COpen time ≥ 30 min. EN 1346Adjustability ≥ 1 hrVertical slip ≤ 0,5 mm EN 1308Foot traffic ≈ 24 hrsGrouting ≈ 12 hrs on walls / ≈ 24 hrs on floorsInterval before normal use ≈ 7 ggCoverage * ≈ 2 – 4 kg/m2




The Eco and Bio classifications refer to the GreenBuilding Rating® Manual 2013. This information was last updated in January 2014 (ref. GBR Data Report -02.14); please note that additions and/or amendments may be made over time by KERAKOLL SpA; for the latest version, see www.kerakoll.com. KERAKOLL SpA shall therefore be liable for the validity, accuracy and updating of information provided only when taken directly from its institutional website. The technical data sheet given here is based on our technical and practical knowledge. As it is not possible for us to directly check the conditions in your building yards and the execution of the work, this information represents general indications that do not bind Kerakoll in any way. Therefore, it is advisable to perform a preliminary test to verify the suitability of the product for your purposes.

0003

2Ela

stik

Eco

Cod

e: P

301

2014

/02

EN

- Product for professional use- abide by any standards and national regulations- store and use at a temperature above +5 °C. Protect from frost- do not use the adhesive to correct substrate irregularities- lay and press tiles onto fresh adhesive, making sure it has not formed a surface skin- use the floating and buttering method for all external laying- the temperature, ventilation and absorption of the substrate and covering materials, may vary the adhesive workability and setting times- if necessary, ask for the safety data sheet- for any other issues, contact the Kerakoll Worldwide Global Service +39 0536 811 516 - [email protected]

WARNING

VOC INDOOR AIR QUALITY (IAQ) - VOLATILE ORGANIC COMPOUND EMISSIONSConformity EC 1 plus GEV-Emicode GEV certified 2950/11.01.02HIGH-TECHShear adhesion after 14 days ≥ 3,5 N/mm2 EN 1324Adhesion to concrete after 28 days ≥ 2 N/mm2 EN 1348Durability test:- shear adhesion after heat ageing ≥ 3,5 N/mm2 EN 1324- shear adhesion after water immersion ≥ 0,5 N/mm2 EN 1324- shear adhesion after high temperature ≥ 3,5 N/mm2 EN 1324Working temperature from -30 °C to +90 °CConformity D2 TE EN 12004 D2 E CSTB 199-AD-357


PERFORMANCE

• Flooring and walls, for internal use

• Suitable for ceramic tiles, low thickness slabs and stable natural stone on cement-, gypsum- or anhydrite-based substrates

• Adjustability ≥ 30 min.


GREENBUILDING RATING® PRODUCT STRENGTHS

Uselaying ceramic tiles on walls and floors.

Materials:- porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats- natural stone, recomposed materials and marble not subjected to deformation or staining due to water absorption- slabs of insulating or soundproofing material

Substrates:- mineral screeds such as Keracem® Eco Pronto, Keracem® Eco Prontoplus and Rekord® Eco Pronto- screeds with mineral binders Rekord® Eco and Keracem® Eco- cement, gypsum and scagliola plasters- plasterboard, gypsum brick, concrete block and cellular concrete walls- cement-based screeds, anhydrite screeds- prefabricated concrete and fresh concrete castings- chipboard, plywood and similar materials

On internal floors and walls, in domestic, commercial and industrial applications.

Do not useFor external use, on wet surfaces or substrates subjected to moisture rising; in environments where water is always present; with low-absorption tiles on non-absorbent substrates.

AREAS OF USE

Preparation of substratesThe substrate must be even, dry, free from dust, oil and grease, free of any rising moisture, with no loose debris, flaky or parts. Uneven areas will be corrected in advance with suitable finishing products. A primer is normally not necessary when laying on gypsum or anhy-drite. Nevertheless, check that the substrate is perfectly dry, laid in a single layer and without any thin finishing, that may be imperfectly anchored and therefore not suitable for the tile covering.

PreparationUniversal Eco is ready-to-use and does not need any preparation. In any case, before use it is advisable to remix the product well inside the container to ensure the mixture is of an even consistency. The high thixotropy of Universal Eco means it can also be used on walls. Any excess adhesive can be kept for later use by putting the lid back on the container.


LAYING RANGE / Mineral adhesives for ceramic tiles and natural stone

0003

3Uni

vers

al E

co C

ode:

P32

9 20

14/0

1 EN

Certified, eco-friendly, ready-to-use organic mineral adhesive for high adhesion, high-performance laying with no vertical slip, ideal for use in GreenBuilding. Solvent-free and with very low volatile organic compound emissions. Safeguards the health of both operators and the environment.

Universal Eco has no vertical slip and develops a long adjustability time which means ceramic tiles can also be laid diagonally, from top to bottom, without having to use spacers.

Universal Eco

5

®


30


y

Low Emission

Solvent ≤ 5 g/kg

SLVREDUCED

Low Ecological Im

pact

Health Care


75%

Very low VOC emissions Solvent-free

No environmental hazard rating


EN 12004

CO

MPLIANT WITH

EUROPEAN NORM

D1 TEEN 12004

CO

NTRIBUTES TO

P O I N T S

* É MISSION DANS L’AIR INT É RIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions).

0003

3Uni

vers

al E

co C

ode:

P32

9 20

14/0

1 EN

ApplicationUniversal Eco should be applied directly to the substrate with a suitable toothed spreader; use a quantity of adhesive sufficient to ensure full tile wettability of the back. Lay tiles while the adhesive is fresh, pressing them lightly to ensure perfect adhesion. Ceramic tiles do not normally have to be wetted in advance, however check for any traces of dust or dirt, which must be removed.

CleaningResidual traces of Universal Eco can be removed from tools and covered surfaces with water before the product hardens.


Universal Eco is an adhesive dispersed in water. Low temperatures and low substrate and material absorption may greatly extend set-ting and hardening times of the adhesive.

Insert desolidarisation and elastic fractionizing joints every 20/25 m2 and every 8 metres in long, narrow applications.

SPECIAL NOTES

Certified laying of ceramic tiles, porcelain tiles and marble must be performed with a ready-to-use, eco-friendly, organic, mineral adhesive for high adhesion laying with no vertical slip, compliant with EN 12004 – Class D1 TE, GreenBuilding Rating® Eco 5, such as Universal Eco by Kerakoll Spa. A ____ mm toothed spreader must be used for an average coverage of ≈ ___ kg/m2. Existing joints must be respected, create elastic fractionizing joints every ___ m2. Tiles must be laid with joints of ___ mm width.

ABSTRACT

Appearance White pasteSpecific weight ≈ 1,79 kg/dm3

Mineralogical nature of inert material crystalline carbonateGrading ≈ 0 – 300 µmShelf life ≈ 12 months in the original packagingWarning Protect from frost, avoid direct exposure to sunlight and sources of heatPack 25 - 15 - 5 kg bucketsViscosity ≈ 480,000 mPa · s, rotor 95 RPM 2.5 Brookfield methodTemperature range for application from +5 °C to +35 °COpen time ≥ 30 min. EN 1346Adjustability ≥ 30 min.Vertical slip ≤ 0,5 mm EN 1308Foot traffic ≈ 24 hrsGrouting ≈ 12 hrs on walls / ≈ 24 hrs on floorsInterval before normal use ≈ 7 ggCoverage * ≈ 2 – 4 kg/m2




The Eco and Bio classifications refer to the GreenBuilding Rating® Manual 2013. This information was last updated in Decembre 2013 (ref. GBR Data Report - 01.14); please note that additions and/or amendments to this information may be made over time by KERAKOLL Spa; for the latest version, see www.kerakoll.com. KERAKOLL SpA shall therefore be liable for the validity, accuracy and updating of information provided only when taken directly from its institutional website. The technical data sheet given here is based on our technical and practical knowledge. As it is not possible for us to directly check the conditions in your building yards and the execution of the work, this information represents general indications that do not bind Kerakoll in any way. Therefore, it is advisable to perform a preliminary test to verify the suitability of the product for your purposes.

0003

3Uni

vers

al E

co C

ode:

P32

9 20

14/0

1 EN

- Product for professional use- abide by any standards and national regulations- store and use at a temperature above +5 °C. Protect from frost- do not use the adhesive to correct substrate irregularities- lay and press tiles onto fresh adhesive, making sure it has not formed a surface skin- the temperature, ventilation and absorption of the substrate and covering materials, may vary the adhesive workability and setting

times- if necessary, ask for the safety data sheet- for any other issues, contact the Kerakoll Worldwide Global Service +39 0536 811 516 - [email protected]

WARNING

VOC INDOOR AIR QUALITY (IAQ) - VOLATILE ORGANIC COMPOUND EMISSIONSConformity EC 1 plus GEV-Emicode GEV certified 2949/11.01.02HIGH-TECHShear adhesion after 14 days ≥ 2,5 N/mm2 EN 1324Adhesion to concrete after 28 days ≥ 2,5 N/mm2 EN 1348Durability test:- shear adhesion after heat ageing ≥ 2,5 N/mm2 EN 1324Working temperature from -30 °C to +80 °CConformity D1 TE EN 12004 D1 E CSTB 199 AD 364


PERFORMANCE

catalogo international 2016 - ecoscapeecoscape-ltd.com › ... ›...

Documents