catalogo de microfonos
TRANSCRIPT
CATALOGO DE MICROFONOS
NEFTALÍ GUZMÁN ESQUIVEL
AKG
NEUMANN
AUDIO THECNICA
SHURE
SENNHEISER
BLUE
AKG
C 12 VR
Recording
Brass
Strings
Vocals
Polar pattern: cardioid, omnidirectional, figure-eight, and 6 intermediate positions
Frequency range: 30 to 20,000 Hz
Max. SPL: 128/138/148 db (k=3%)
Equivalent noise level (IEC 60268-4): 32 db
Equivalent noise level: 22 dB-A
Signal/noise ratio (A-weighted): 72 dB
Preattenuation pad: 10 dB, 20 dB, selectable
Bass filter: 6 dB/octave at 100 Hz, 12 dB/octave at 130 Hz
Impedance: 200 Ohm
Recommended load impedance: >1000 ohms
Connector: 12-pin DIN
Cable 10 m (33 ft.)
Net weight: 680 g / 24 oz.
Shipping weight: 4.5 kg / 9.9 lbs.
Patent(s): Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488)
P2
Live sound
Bass instruments
Dynamic microphone designed for low-pitched instruments
Powerful sound with great bass range
Handles highest sound pressure levels
Integrated stand adapter
Rugged all-metal body withstands typical tough stage use
Humbucking coil rejects EMC noises
Complete with carrying case
Rugged all metal microphone for bass instruments such as bass drum, trombone or bass amplifier.
It delivers powerful sound with a high energy low end.
Polar pattern: cardioid
Frequency range: 20 to 16,000 Hz
Sensitivity: 2.5mV/Pa
Max. SPL: 152 dB SPL
Recommended load impedance: >= 2,000 ohms
CK 98 (AKG Blue Line)
Miniature shotgun microphone capsule for the AKG BLUE LINE modular studio condenser
microphone system. When attached to the SE 300 B power supply module, the capsule shall
perform to the following specifications: Frequency range: 20–20,000 Hz; sensitivity at 1 kHz: 25
mV/Pa; maximum SPL: 124/134 dB SPL for 1% T.H.D.; equivalent noise level: 17 dB-A. The capsule
shall be provided with an extremely rugged bayonet mount for attaching to the SE 300 B power
supply module. The case shall be no larger than 19 mm in diameter and 247 mm long. The
maximum net weight of the capsule shall be 80 g (2.8 oz.).
Percussions
Recording
Theater, onstage miking
TV, motion picture, video production
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 25 mV/Pa (-32 dBV)
Max. SPL 124/134 dB (for 1% THD)
Equivalent noise level (IEC 60268-4) 28 dB
Equivalent noise level 17 dB-A
Signal/noise ratio (A-weighted) 77 dB
Connector bayonet mount
Finish dark gray
Net weight 80 g / 2.8 oz.
Shipping weight 500 g / 1.1 lb.
Patent(s) Electrode support for condenser transducer (Patent no. AT
392.182, DE 4.021.661)
C 411
Instrumentos de cuerda
Para instrumentos de cuerda: guitarra acústica, violín, cello, contrabajo, etc. Sistema a
condensador, solo percibe las vibraciones del instrumento, evitando la realimentación acústica.
Incluye adhesivo especial para montaje que no daña el instrumento.
Especificaciones técnicas
Respuesta en frecuencia: 10 - 18.000 Hz
Diagrama polar: captador de vibración
Sensibilidad: 1 mV/ms-2
Impedancia: 200 Ohms
Máximo SPL para 1% / 3% THD: 96 dB/103 dB
Dimensiones: 27x14x9,5 mm
Peso neto: 18 g
Accesorios incluidos: compuesto adhesivo
Accesorios no incluídos: B29L
NEUMANN KU 100 dummy head
The KU 100 dummy head is a binaural stereo microphone. It resembles the human head and has
two microphone capsules built into the ears. When listening through high-quality headphones it
gives the illusion of being right at the scene of the acoustic events.
Dummy head for head-related stereophony
Pressure transducer with flat diffuse-field frequency response
Loudspeaker compatible
Transformerless circuitry
Two-stage switchable low frequency roll-off
Switchable 10 dB preattenuation
Balanced and unbalanced outputs (XLR and BNC)
When using the KU 100 dummy head, the binaural stereo
experience moves the listener into the scene of the original performance, in contrast to other
space-related recording techniques, where the acoustic event is moved to the listener.
The dummy head is also used in many industrial applications as a measuring device, for example in
acoustic research. The KU 100 can be operated with typical 48 V phantom powering, or from an
external power supply unit, or from the built-in battery.
At the bottom of the unit is a switch for the different power supply modes, as well as connectors
for balanced and unbalanced output signals. Inside the head are additional switches for 10 dB
attenuation and the high-pass filter.
The idea
The KU 100 dummy head is a replica of the human head with a microphone built into each ear.
When the recorded audio signal is reproduced through high-quality headphones the listener
perceives a sound image almost identical to the one he would have heard at the recording location
of the dummy head (head-related stereophony).
When played back through loudspeakers, the sound matches to a high degree that of conventional
stereo microphones, placed in the same position. However, a superior quality is added, that of a
distinct spatial depth perception.
The KU 100 dummy head is just as easy to use during creative radio drama productions, and music
recordings where the room acoustics should be recorded at the same time.
The dummy head is also contributed essentially as an important tool to preserve natural sounds of
all kinds. In addition, the dummy head is frequently used to examine and document the influence
of noise in industrial applications at various working places under realistic conditions.
Electrical features
The KU 100 uses transformerless circuitry with the advantage of high output capability, fast
transient response, and extremely low self noise. The usual output transformers are replaced by
electronic circuits. As with traditional transformers, this technique ensures good common mode
rejection, and prevents RF interference, that may influence the balanced audio signals.
The dummy head provides balanced (XLR) and unbalanced (BNC) outputs. It can be powered in
three different modes:
from an external P 48 phantom power supply,
with batteries as part of the internal battery supply,
or from an external AC mains supply (included with the system).
Filter and attenuation
A 10 dB switch inside the head attenuates the sensitivity. A second switch selects the cutoff
frequency of the high-pass filter to be either linear, 40 Hz, or 150 Hz.
Delivery range
The KU 100 comes in a robust aluminum carrying case, together with an external power supply
unit, a 5-pin XLR cable, and an adapter cable that splits the 5-pin XLR output into two 3-pin XLR
connectors.
Acoustical operating principle Pressure transducer
Directional pattern Ear
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 20 mV/Pa
Rated impedance 50 ohms balanced, 200 ohms unbalanced
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 29 dB
Equivalent noise level, A-weighted1) 16 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 65 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 78 dB
Maximum SPL for THD 0.5%2) 135 dB
Maximum SPL for THD 0.5% with preattenuation2) 145 dB
Maximum output voltage 1950 mV
Dynamic range of the microphone amplifier (A-weighted) 119 dB
Supply voltage (P48, IEC 61938) 200 ... 240 V / 48 V ± 4 V / 6 x 1.5 V
Current consumption (P48, IEC 61938) 2 x 2 mA
Matching connector XLR3F / XLR5F
Weight 3500 g
Height 280 mm
Width 180 mm
Depth 220 mm
KK 104/105 S
Combining the Neumann KK 104/105 S capsule heads with the Sennheiser SKM 5200/SKM 5000
N* Wireless System thrusts the legendary Neumann sound into the wireless domain, thus opening
up new dimensions in sound for sophisticated live-performance engineering.
Details
In terms of engineering, the KK 104/105 S are based on the KMS 105, 140, and 150 family of wired
vocalist microphones.
They inherit not only their outstanding tonal characteristics and specifications but also their
sturdiness and efficiency in suppressing popping and handling noise.
The Sennheiser SKM 5200 and SKM 5000 N handheld transmitter are advanced versions of the
SKM 5000*, optimized for the Neumann capsule heads, and ensuring reliable, interference-free,
high-quality transmission of the capsule signal to the corresponding Sennheiser receiver.
The capsule and handheld transmitter are available with the typical Neumann nickel-colored finish
and in black. The KK 104/105 S package includes a spacious, roadworthy nylon pouch big enough
to hold not only the capsule, but the transmitter, battery packs, and additional accessories as well.
These product components are a dream come true for countless customers, who time and again
demanded a wireless variant of the successful Neumann KMS 104/105 vocal microphones.
Simultaneously, this combination unites the core areas of competence of two established global
players and market leaders:
Neumann – the world’s leading manufacturer of condenser microphones, and Sennheiser – the
market leader with years of experience in the area of high-quality wireless systems.
Neumann capsule head engineering expands with Sennheiser liveperformance engineering
Cardioid (KK 104 S) and Supercardioid (KK 105 S) characteristic
Built-in, highly effective suppression of popping noises
Easy dismantling for cleaning
Pure, open, and neutral sound transmission
Directional pattern Cardioid/Supercardioid
Frequency range 80 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 1.7/1.3 mV/Pa ± 1 dB
Equivalent noise level, CCIR1) 42/44 dB
Equivalent noise level, A-weighted1) 31/33 dB-A
Max. SPL for THD 0.5%2) 148/150 dB
Maximum SPL for THD 3%2) 153/155 dB
Dynamic range (A-weighted) > 117 dB-A
Frequency range 450 - 960 MHz
Switching bandwidth 24 MHz
Transmitter frequencies 16
RF-output 50 mW (-3 dB)
Noise suppression system Sennheiser "HiDyn plusTM"
Weight incl. transmitter + power supply unit approx. 325 g
Diameter 48 mm
Length (+ transmitter) 257 mm
U 89
The U 89* is a studio microphone for universal applications. The headgrille protects a
dual-diaphragm capsule. A rotary switch below the headgrille selects from five different polar
patterns. Therefore the microphone can be adapted easily to large sound sources, and those that
are spread wide apart, or to sound sources to be recorded at a greater distance.
The amplifier accepts sound pressure levels up to 134 dB without distortion. This figure can be
increased to 140 dB. An additional rotary switch activates a filter that changes the low frequency
response either below 80 Hz or 160 Hz frequency.
Applications
The U 89 i is similar in appearance to the U 87. It is of smaller size, and lighter weight. It features
five instead of three directional characteristics and a higher maximum sound pressure level which
make this microphone easier adaptable to different applications.
Polar patterns
In addition to the usual directional polar patterns: omnidirectional, cardioid, and figure-8, we have
added a hypercardioid and wide-angle cardioid characteristic. When compared to the standard
cardioid pattern, the hypercardioid characteristic suppresses sound from the side more efficiently.
The wide-angle polar pattern is especially useful to record large sound sources.
Acoustic features
The microphone is addressed from the front, marked with the Neumann logo. The large
diaphragm capsule has a very smooth frequency response for all polar patterns over a wide
acceptance angle. The frequency response curves are flat up to 10 kHz within a pickup angle of ±
100°.
As a result the U 89 i has a very even diffuse-field response for all polar patterns. This is important
in a reverberant environment when more reflections arrive at the microphone capsule. The
acoustic information is not affected in its tonal quality when recorded by the microphone.
This characteristic is achieved without resorting to corrective resonance effects.
The capsule it is elastically mounted to avoid any structure borne noise that could interfere with
its operation.
Filter and attenuation
The amplifier handles sound pressure levels up to 134 dB without distortion. With a self noise level
of 17 dB (A-weighted) the total dynamic range is 117 dB. Maximum sound pressure level is 140 dB
when the - 6 dB rotary switch is in the ON position.
A low frequency roll-off at 80 Hz or 160 Hz can be activated with another rotary switch below the
headgrille. This filter suppresses low frequency interference, yet maintains an even frequency
response for close-up sound sources, for example, when proximity effect could adversely affect
the program material.
A steep high-pass filter in the LIN position prevents the output transformer of the microphone
from being overloaded due to undesired subsonic frequencies.
Operational safety
All exposed surfaces of the microphone capsule, including the diaphragms, are at ground
potential. This technology makes them highly immune to electrical and atmospheric interference
and contamination through microscopic dust particles.
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
Five directional characteristics: omni, wide angle cardioid, cardioid, hypercardioid, figure-8
Thereby most versatile in all recording situations
Switchable 6 dB pre-attenuation
Extended frequency range in comparison to U 87 Ai
Acoustical operating principle Pressure gradient transducer
Directional pattern Omnidirectional, wide angle, cardioid, hypercardioid, figure-8
Frequency range 20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm 8 mV/Pa
Rated impedance 150 ohms
Rated load impedance 1 kohms
Equivalent noise level, CCIR1) 28 dB
Equivalent noise level, A-weighted1) 17 dB-A
Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) 66 dB
Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) 77 dB
Maximum SPL for THD 0.5%2) 134 dB
Maximum SPL for THD 0.5% with preattenuation2) 140 dB
Maximum output voltage 800 mV
Dynamic range of the microphone amplifier (A-weighted) 117 dB
Supply voltage (P48, IEC 61938) 48 V ± 4 V
Current consumption (P48, IEC 61938) 0.8 mA
Matching connector XLR3F
Weight 400 g
Diameter 46 mm
Length 185 mm
AUDIO THECNICA
AT808G
Micrófono Subcardioide Dinámico Para Consola :.
Diseñado para usarse como un micrófono de cabina, de calidad, en aplicaciones comerciales,
industriales y de entretenimiento
Diseño versátil, de cuello de ganso, y funcionalidad confiable
Su respuesta de frecuencias a la medida garantiza una excelente inteligibilidad en entornos con
ruido ambiental excesivo
Su patrón polar subcardioide reduce el registro de sonido lateral y posterior, mejorando el
aislamiento de la fuente de sonido deseada
Su capucha protectora reduce el ruido del viento y los “pops” de consonantes oclusivas cuando se
usa extremadamente cerca
Se acopla directamente al conector tipo XLRF de un cable o de alguna superficie
PATRÓN POLAR Subcardioide
RESPUESTA DE FRECUENCIA 200-5.000 Hz
SENSIBILIDAD DE CIRCUITO ABIERTO –60 dB (1,0 mV) re 1V a 1 Pa
IMPEDANCIA 800 ohms
PESO 135 g (4,8 oz)
DIMENSIONES 412,7 mm (16,20") de largo,
25,0 mm (0,98") de diámetro de la cabeza,
19,0 mm (0,75") de diámetro de la base
CONECTOR DE SALIDA Integral de 3 pines tipo XLRM
BP893-TH
MicroEarset Micrófono tipo diadema de condensador omnidireccional.
Gracias a su audífono ergonómicamente diseñado y a su discreto portamicrófono de una pulgada,
el modelo BP893-TH MicroEarset de Audio-Technica ofrece una captación de voz natural y pasa
totalmente desapercibido. Su diseño liviano y pequeño, junto con su facilidad de uso, lo
convierten en ideal para uso en actuaciones teatrales, casas de congregación y estudios de
retransmisión.
El micrófono BP893-TH MicroEarset puede colocarse de forma discreta en cualquiera de las orejas.
Su cápsula de condensador omnidireccional en miniatura ofrece una extraordinaria captación para
una reproducción vocal natural, similar a la reproducción de audio que ofrece un micrófono
lavalier de alta calidad. Asimismo, el micrófono es ideal para uso en la captación del sonido de
violines; los violinistas solo tienen que colocárselo sobre la oreja, sin necesidad de utilizar
abrazaderas sobre el violín.
Extraordinaria claridad e inteligibilidad
Diseño ligero y ergonómico
Portamicrófono de una pulgada, extremadamente discreto
Colocación segura en la oreja
Respuesta de frecuencias ampliada para ofrecer una reproducción vocal natural
Conector de salida para micrófono de 4 pines con traba compatible con el módulo de alimentación
incluido y todos los transmisores inalámbricos de petaca de UniPak® de Audio-Technica
Filtro UniSteep® que proporciona una marcada atenuación de frecuencias graves para mejorar la
calidad de la recepción del sonido sin que afecte a la calidad de la voz
ESPECIFICACIONES
ELEMENTO Condensador polarizado permanente de placa trasera con carga fija
PATRÓN POLAR Omnidireccional
RESPUESTA DE FRECUENCIA 20-20.000 Hz
ATENUACIÓN GRADUAL DE GRAVES 80 Hz, 18 dB/octava (sólo modelo con cable)
SENSIBILIDAD DE CIRCUITO ABIERTO –34 dB (19,9 mV) re 1V a 1 Pa
IMPEDANCIA 245 ohms (sólo modelo con cable)
NIVEL DE SONIDO DE ENTRADA MÁXIMO 114 dB SPL, a 1 kHz a 3% T.H.D.
RANGO DINÁMICO (TÍPICO) 88 dB, 1 kHz al max SPL (sólo modelo con cable)
RELACIÓN SEÑAL/RUIDO 68 dB, 1 kHz a 1 Pa
REQUISITOS DE LA POTENCIA PHANTOM 11-52V DC, 2 mA típico (sólo modelo con cable)
INTERRUPTOR Plana, atenuación
(sólo modelo con cable)
CONSUMO DE CORRIENTE 0,1 mA típico a 5V (sólo modelo sin cable)
VARIACIÓN DEL VOLTAJE 2,5-11 V (sólo modelo sin cable)
PESO (MICRÓFONO) Micrófono, portamicrófono y auricular: 2,0 g (0,07 oz)
PESO (MÓDULO DE POTENCIA) 85 g (3,0 oz)
(sólo modelo con cable)
DIMENSIONES Micrófono: 8,1 mm (0,32") de largo, 2,6 mm (0,10") de diámetro
Portamicrófono: 26,4 mm (1,04") de largo, 1,07 mm (0,04") de diámetro del portamicrófono
DIMENSIONES (MÓDULO DE POTENCIA) 97,6 mm (3,84") de largo, 18,9 mm (0,74") de diámetro
(sólo modelo con cable)
CONECTOR DE SALIDA (MÓDULO DE POTENCIA) Integral de 3 pines tipo XLRM
CABLE cable de 1,4 m (55") de longitud (fijado permanentemente al micrófono), de 1,6 mm
(0,06”) de diámetro, blindado de 2 conductores cable (versiones cw y con cable)
AT2022
Micrófono estéreo X/Y.
El modelo AT2022 es un micrófono de condensador de doble elemento diseñado para grabación
estéreo. Dos cápsulas de condensador unidireccional en una configuración pivotante X/Y para
facilitar el uso estéreo estrecho (90°) o ancho (120°). Además, las cápsulas se pliegan para facilitar
el almacenamiento y el transporte. Diseñado para grabaciones estéreo generales y captación de
sonido en exteriores, el AT2022 proporciona el impacto y realismo de un campo sonoro en vivo. El
micrófono viene equipado con una abrazadera, una pila AA, una capucha antiviento aterciopelada
y un cable de 0,5 m que termina en un conector estéreo 3,5 mm.
Micrófono estéreo X/Y con sistema exclusivo de cápsulas de condensador de electreto pivotantes
(90° o 120°) que ofrece una flexibilidad excepcional
Proporciona el impacto espacial y el realismo de un campo sonoro en vivo
El funcionamiento con pila permite su uso con la mayoría de los dispositivos de grabación
Filtro de atenuación de frecuencias graves conmutable que minimiza la captación de frecuencias
graves no deseadas
Uso estéreo a 90° o 120° seleccionable por el usuario para patrones de captación estrecho o ancho
Ideal para grabaciones estéreo en general y captación de sonido en exteriores
Excelente separación de canales
La capucha antiviento aterciopelada incluida ofrece una excelente protección
Soporte antivibración interno que reduce al máximo el ruido consecuencia de la manipulación
ESPECIFICACIONES
ELEMENTOS Condensador polarizado permanente de placa trasera con carga fija
PATRÓN POLAR Estéreo X/Y
RESPUESTA DE FRECUENCIA 20–20.000 Hz
ATENUACIÓN GRADUAL DE GRAVES 150 Hz, 6 dB/octava
SENSIBILIDAD DE CIRCUITO ABIERTO -41 dB (8,9 mV) re 1V a 1 Pa
BALANCE DE CANAL <2,5 dB
IMPEDANCIA 200 ohms
NIVEL DE SONIDO DE ENTRADA MÁXIMO 122 dB SPL, 1 kHz a 1 kHz a 1% T.H.D.
RANGO DINÁMICO (TÍPICO) 103 dB, 1 kHz al max SPL
RELACIÓN SEÑAL/RUIDO 75 dB, 1 kHz a 1 Pa
TIPO DE BATERÍA 1,5V AA/UM3
CORRIENTE / VIDA DE LA BATERÍA 1,2 mA / 500 horas típico (alcalina)
INTERRUPTOR Apagado, encendido-plano, encendido-con atenuación
PESO 270 g (9,5 oz)
DIMENSIONES 192,0 mm (7,56") de largo,
65,0 mm (2,56") de diámetro maximo de la cabeza,
21,0 mm (0,83") de diámetro del cuerpo
CONECTOR DE SALIDA Integral de 3 pines tipo XLRM
CABLE Cable estéreo de 0,5 m (1,6') de largo, de 3 conductores, con blindaje, con sobrecubierta
de vinilo, con un conector tipo XLRF de 3 pines, en el extremo del micrófono, y un miniplug
estéreo de 3,5 mm, en el extremo de la salida
ACCESORIOS PROVISTOS AT8405a abrazadera para pedestales estriados de 5/8"-27;
capucha antiviento aterciopelada; pila; suave saco protector
SHURE BETA 19
a semicardioidede superficie
ShureCondensador Tiene un diafragma liviano y sensible que captura el sonido con precisión y
hasta el último detalle. Se alimenta con baterías o con alimentación Phantom.
Usos recomendados
Piano/órgano Bombo
El Beta 91A de Shure está diseñado para utilizarse en bombos, así como también para como para
instrumentos más tradicionales como el piano. Posee una cápsula de micrófono actualizada, un
preamplificador integrado con salida XLR. El Beta 91A tiene un excelente ataque y entrega un
sonido de calidad para el estudio, aun con niveles de presión sonora extremadamente altos (SPL).
El patrón polar semi-cardioide permite obtener una ganancia máxima antes de la
retroalimentación y rechaza sonidos fuera del eje.
El diseño de bajo perfil tiene un preamplificador integrado y un conector XLR para maximizar la
eficiencia en el montaje mientras, al mismo tiempo, minimizar el desorden de los cables en el
escenario.
La respuesta de frecuencia está optimizada para el bombo y otras aplicaciones de bajas
frecuencias y tiene un amplio rango dinámico para utilizarse en ambientes de alto SPL.
El interruptor de contorno, de dos posiciones, le permite seleccionar una respuesta plana para
obtener un sonido natural o la posición que corta las frecuencias medias-graves realza las
frecuencias graves sin perder el ataque de las frecuencias altas.
No requiere ningún montaje externo ni accesorios para facilitar su uso o su almacenamiento.
Incluye una funda protectora con cremallera.
Tipo de Cápsula
Condensador Electrete
Respuesta de Frecuencia
20 a 20,000 Hz
Patrón Polar
Semi-cardioide (cardioide en hemisferio sobre la superficie del montaje)
Impedancia de salida @ 1 kHz
146 Ω
Sensibilidad (voltaje de circuito abierto @ 1 kHz, típico)
-48.5 dBV/Pa[1] (3.8mV)
1 Pascal=94 dB SPL
SPL Máximo (1 kHz al 1% THD[2])
1000 Ω carga de 151 dB, 2500 Ω carga de 155 dB
Relación de Señal a Ruido[3] 64.5 dB
Rango Dinámico (at 1 kHz)
1000 Ω carga de 121.5 dB
2500 Ω carga de 125.5 dB
Rechazo de Modo Común (20 Hz a 20 kHz, 1% THD)
> 55 dB
Nivel de Recorte (20Hz a 20 kHz at 1% THD)
1000 Ω carga de 7.50 dBV, 2500 Ω carga de 12.5 dBV
Ruido propio equivalente a SPL
29.5 dB SPL-A
Polaridad
La presión positiva sobre el diafragma produce voltaje positivo en el pin 2 con respecto al pin 3
Peso Neto
470 g (16.6 oz.)
Interruptor de Contorno de Frecuencia
7 dB de atenuación centrados a 400 kHz
Conector
Salida XLR macho balanceado de tres pines
Requisitos de Energía
11-52 Vdc de alimentación phantom (IEC-61938), 5.4 mA
[1] 1 Pa=94 dB SPL
[2] THD del preamplificador del micrófono cuando se aplica al nivel de la señal de entrada y
equivale a la salida de la cápsula según el SPL
[3] S/N especificado, la relación es la diferencia entre 94 dB SPL y equivale al SPL de ruido propio,
ponderación A
[4] Todas las especificaciones se miden con un suministro de alimentación phantom de +48 Vdc. El
micrófono opera con voltajes más bajos, aunque existe una ligera disminución del headroom y
de la sensibilidad.
Ksm313
micro de cinta
BiDireccional Patrón polar
Capta sonidos que provienen del frente y atrás de la cápsula.
Sintonizado Respuesta de frecuencia
Respuesta consistente y extendida. Sintonizado para resaltar ciertos tipos específicos de
instrumentos o voces.
ShureCinta Ofrece una calidad de audio de primer nivel, con durabilidad y resistencia superior a
niveles extremos de presión sonora.
Usos recomendados
Voces en estudio Studio Instrument Conjuntos vocales en estudio Voces en vivo
Opciónes Disponible
El KSM313/NE es un micrófono de cinta bi-direccional para sonido y rendimiento de primer nivel.
La característica “Dual-Voice” ofrece dos fuentes discretas sónicas, las partes delantera y trasera
del micrófono, para uso con instrumentos amplificados o aplicaciones vocales. Hecho a mano en
los E.E.U.U. usando componentes únicos y tecnología propietaria de cinta Roswellite®, ofreciendo
resistencia y durabilidad revolucionaria bajo condiciones extremas.
Con alta resistencia a la tensión, durabilidad y memoria de forma, la cinta Roswellite® sustituye el
material tradicional de cintas de aluminio para resistencia superior a niveles extremos de presión
sonora.
Con características únicas de tecnología y aplicación, junto con materiales y construcción superior,
los Micrófonos de Cinta KSM de Shure son la opción necesaria para los desempeños más
destacados en estudio o en vivo.
Patrón polar bi-direccional entrega sonido de primer nivel con rechazo superior fuera del eje
Característica “Dual-Voice” sintonizada para ofrecer al usuario dos tipos de respuestas sónicas:
cálida y llena para fuentes amplificadas o para aplicaciones vocales brillantes
Cinta propietaria Roswellite® reemplaza el material tradicional de cintas de aluminio ofreciendo
alta resistencia a la tensión, durabilidad y memoria de forma que provee una resistencia superior a
niveles extremos de presión sonora
Componentes fabricados a medida para una presencia superior con mínima perdida de señal y
máxima salida
Respuesta de frecuencias 30 – 15.000 Hz, con manejo a 146dB de presión sonora ideal para captar
voces, instrumentos acústicos y salas de conciertos
Calidad Legendaria y construcción superior Shure hecho con materiales de acero, plata, oro y
aluminio armados a mano
Tipo de cápsula: Cinta Roswellite®
Respuesta de frecuencia: 30Hz – 15,000Hz
Patrón polar direccional: Bi-direccional
Impedancia de salida: Transformador, equilibrado, 270Ω (real)
Polaridad: La presión positiva en en la parte delantera de la cinta produce una señal positiva en el
pin 2 de salida en relación al pin 3
Sensibilidad (a 1 kHz, voltaje de circuito abierto): -54.5 dBV/Pa (1.88 mV/Pa)
Medidas & Peso
Diámetro: 4.318 cm (1.7 in)
Altura: 13.5 cm (5.3 in)
Peso: 400 g (0.881 lbs)
SPL Máx: 146 dB
Conector: Conector de audio de 3 pines profesional (tipo XLR), macho
104C
Usos recomendados
Anuncio de mensajes
Se recomienda el micrófono 104C para todo tipo de actividades comunicativas, en lugares
cerrados o al aire libre, como el uso de estaciones móviles y fijas, la policía, los bomberos, las
empresas de servicios públicos, los servicios forestales y de transporte, las empresa de minería y
aplicaciones industriales (radiotelefonía y radio amateur), y actos públicos en espacios abiertos o
cerrados. El micrófono 104C es un micrófono de carbón pequeño, accionado a presión, de
diafragma, que cabe cómodamente en la mano y posee un interruptor PTT (presione para hablar)
de alta resistencia, una valija ARMO-DUR, y un cable espiralado recubierto de goma de larga
duración.
Nota: El 104C sólo funciona con fuentes diseñadas para micrófonos de carbón.
Respuesta de frecuencia de 300 a 4.000 Hz, diseñada específicamente para las comunicaciones de
voz
La valija pequeña, liviana y compacta ocupa el mínimo espacio en equipos móviles y portátiles, y
cabe cómoda y firmemente en la mano
La valija ARMO-DUR® de alto impacto, extremadamente reforzada, es más resistente y liviana que
la de metal moldeado, y es agradable al tacto en climas cálidos y fríos
Interruptor bipolar controlado por un mecanismo único tipo “hoja”, diseñado para soportar
condiciones de funcionamiento difíciles y un uso constante
Cable espiralado recubierto de goma de larga duración
Reforzado y confiable en todas las condiciones de funcionamiento
No funciona con sistemas públicos de anuncio de mensajes que requieren un micrófono dinámico
Tipo: De carbón
Respuesta de frecuencia: 300 a 4.000 Hz
Impedancia de carga recomendada: 50 a 100 ohmios
Impedancia real: 30 ohmios (con corriente de 50 mA)
Sensibilidad de salida: 5 dB por debajo de 1 V para una señal de 100 microbares (voltaje medido
con una carga de 100 ohmios)
Corriente recomendada: 50 mA (mínimo 20 mA, máximo 120 mA)
Interruptor: Bipolar controlado por un mecanismo único, tipo “hoja”, para controlar los circuitos
del micrófono y del relé
Cable: Cable espiralado de cuatro conductores, no desmontable de 1,8 m (6 pies)
Estructura externa: ARMO-DUR® gris de alto impacto
Soporte: Incluido
Peso neto: 510 gramos (1 lb, 2 onzas)
Peso con embalaje: 624 gramos (1 lb, 6 onzas)
SENNHEISER MKE 1
General Description
Our smallest Sound Pro. Whether for musicals,live shows or broadcasting applications, the MKE 1 -
Sennheiser's smallest clip-on microphone - performs at its best in all situations in which a
microphone needs to be virtually invisible and still offer outstanding sound quality.
Featuring a newly developed, moisture-resistant protective membrane, the MKE 1 stands up
better than other clip-on microphones to harsh live conditions. Its special gauze and multi-purpose
cap offer additional protection from moisture so that it only picks up what it is meant to pick up -
perfect sound. The ultra-thin, heavy-duty cable with moulded anti-kink sleeve minimizes handling
noise and makes this a microphone you can rely upon completely.
Features
Great strengths - small microphone
Very small dimensions (3.3 mm capsule diameter)
High maximum sound pressure level (142 dB)
Very high speech intelligibility; clear, pleasant treble
Full, natural sound with low ambient noise
Thin (1 mm diameter) and robust cable; flexible with minimum handling noise
Very sweat-resistant due to protective membrane
Flexible tubes for attaching the microphone with clips or adhesive tape
Delivery Includes
1 MKE 1 clip-on microphone
1 MZC 1-2 large frequency response cap
3 make-up protection caps
Pick-up pattern Omni-directional
Frequency response 20 - 20,000 Hz ± 2,5 dB
Sensitivity in free field, no load (1kHz) 5 mV / Pa ± 2.5 dB
Diameter 3.3 mm
Equivalent noise level 27 dB
Equivalent noise level weighted as per CCIR 468-3 39 dB
Max. sound pressure level (passive) 142 dB
Min. terminating impedance 4.7 kΩ
Nominal impedance 1,000 Ω
Operating voltage (mains) 5-15v
Cable length 5.2 ft (3-pin, EW variants) 9.8ft (pigtail variants)
Color black, white, brown, beige
Weight w/o cable and w/o connector .004 oz. (0.1 g)
ME 104
General Description
The ME 104 cardioid modular mini-microphone capsule fulfills professional demands for sound
quality and rugged handling, and is suitable for all areas of live work where a small and
unobtrusive microphone is needed for vocal and speech applications. Scratch resistant matte
finish: anthracite or nickel.
Features
Excellent speech clarity
Gently falling frequency response curve at low frequencies ensures good rejection of handling and
wind noise
Minimal inherent self-noise
Omni-directional (ME102) or cardioid (ME104) microphone capsules, can be quickly interchanged
Optionally available with right-angle plug (copper wire cable, extremely insensitive to handling
noise) or with straight plug (steel wire cable, very resistant to tearing)
Connectors available in straight black, straight beige, right-angle black, right-angle gray
Technical Data
Current consumption Approx. 250 μA
Dimensions d .2 x .5 in. (6 x 12 mm)
Equivalent noise level 30 dB
Equivalent noise level 38 dB
Min. terminating impedance 4,700 Ω
Nominal impedance 1,000 Ω
Pick-up pattern Cardioid
Sensitivity in free field, no load (1kHz) 8 mV/Pa ± 2.5 dB
Weight w/o cable .04 oz. (1 g)
SDC 8200 DV
General Description
The digital SDC 8200 DV delegate unit is an ideal choice for both mobile and fixed conference
systems. Its compact and elegant design harmoniously blends in with any conference room. The
unit features a high-quality built-in loudspeaker, providing excellent sound at a pleasant volume.
By pressing the Mic key, the conference participants can either switch on the microphone or signal
their request to speak. At multi-lingual conferences, the translated languages can be listened to
via headphones. SDC 8200 DV features two voting modes, which are accessed via the participant’s
personal chip card. Results can be conveniently displayed on the unit’s graphic LCD display.
Features
Built-in high-quality loudspeaker (automatically muted when the microphone is switched on)
Microphone on/off (request) key
Gooseneck microphone with red LED ring
Two 3.5 mm headphone jacks for headphones or induction couplers for the hearing impaired
Headphone volume control
Channel selection keys with numerical display of selected channel (floor language + up to 28
translations)
Five voting keys with LED, two voting modes
Back-lit graphic LCD display (122 x 32 dots)
Text messaging
Built-in chip card reader for participant identification
Delivery Includes
1 SDC 8200 DV Delegate Unit
Technical Data
Color Pantone Black 7C
Dimensions 5.9 x 3.1 x 7.3 in. (150 x 80 x 185 mm)
Frequency response 100 - 14,000 Hz
Goose neck length 15 in. (380 mm)
Connector (headphones) 3.5 mm mono (>32 O)
Housing ABS
Operating temperature +5 - +50 °C
Pick-up pattern Cardioid
Power consumption Max. 3.5 W
Standards IEC 849
Voltage 48 V DC
Weight 1.4 lbs. (620 g)
BLUE
SPARK
Blue's newest professional mic, Spark, is a cardioid, solid-state condenser microphone designed to
help you achieve professional quality recordings in any creative environment. Spark features a
custom-designed condenser capsule with Class-A discrete electronics resulting in superbly detailed
and uncolored output, making it the ideal microphone for recording vocals, drums, guitars, pianos,
brass, woodwinds, and just about anything else you can light a fire under.
A new feature found only on the Spark microphone is the unique Focus Control, providing two
different usage modes at the push of a button: the Normal mode (out position) providing
increased low frequency sensitivity for recordings with great impact and definition, along with the
Focus mode, (in position) for even greater clarity and detail.
The Spark microphone ships with a custom-designed pop-filter and shockmount as well as a
convenient and stylish wood case for transport. With Spark, you've got everything you need to
make professional recordings, all in one package.
Wood box
Custom shockmount
Custom pop filter
BOTTLE
The Bottle is Blue's flagship recording tool and its highest achievement in quality and innovation.
The Bottle combines low noise and superb transient response integrated with a system of
interchangeable capsules, the Bottle Caps. In an instant, the bayonet-mounted Bottle Caps can be
exchanged to provide different tonal characteristics and pickup patterns while the included power
supply remains on. The Class A discrete amplifier circuit of the Bottle is a thoroughly modern
homage to the past, with a design utilizing a single hand-selected EF86 pentode vacuum tube in
triode mode. The Bottle is the definition of craftsmanship, with hand-assembled custom
components found throughout. With eight different Bottle Caps to choose from, the Bottle
provides the ultimate recording experience for any application.
Flight case
Powerstream
IEC cable
Champagne cable
B6 capsule
en•CORE 100
Everything we've learned from years of building the world's best studio recording microphones
has gone into the en•CORE 100, a studio-grade handheld dynamic microphone designed to deliver
exceptional all-around performance, no matter what your application.
The en•CORE 100's Proprietary Dynamic Capsule is specially tuned by Blue's capsule engineers to
deliver natural vocals, balanced highs, and amazing detail and clarity, making it an incredibly
versatile tool for live performance as well as studio and broadcasting applications. The unique,
durable finishes and high quality craftsmanship, guarantee your en•CORE mic will deliver the
performance of a lifetime, for a lifetime of performances.
Proprietary Dynamic Capsule tuned for natural vocals and amazing detail and clarity
Cardioid polar pattern delivers impressive off-axis rejection even at high volumes
Blue's proprietary capsule mount delivers minimal handling noise without pads and filters
Stage-ready construction with heavy-gauge barrel construction, reinforced grill, and hardened
metal-plated finishes
Unique styling and craftsmanship, including hand-painted logo, laser-engraved trim ring and
CNC-machined grip
Includes soft-grip microphone clip and soft-lined storage pouch
Proprietary Dynamic Capsule tuned for natural vocals and amazing detail and clarity
Cardioid polar pattern delivers impressive off-axis rejection even at high volumes
Blue's proprietary capsule mount delivers minimal handling noise without pads and filters
Stage-ready construction with heavy-gauge barrel construction, reinforced grill, and hardened
metal-plated finishes
Unique styling and craftsmanship, including hand-painted logo, laser-engraved trim ring and
CNC-machined grip
Includes soft-grip microphone clip and soft-lined storage pouch