casting and forging cast steel and copper casting alloys...din 17210 case- hardened ≥ 440 690-880...

Casting and Forging

Cast Steel and Copper Casting Alloys

The ZOLLERN Group ZOLLERN is one of the pioneers in the metal industry. At several locations in Europe, North America and Asia, 2,400 employees develop, produce and service a wide range of high-quality metal products. ZOLLERN supplies sophisticated solutions for a wide range of applications with its business areas of drive technology, investment casting, sand casting and forging, mechanical engineering elements and steel profi les.

Contents Page

Sand casting alloys 3

Cast steel for general use 4

Case-hardening steels 4

Quenched and tempered, nitriding and spring steels 5

Heat-resisting cast steel 6

Stainless and acid-resistant steels, ferritic/austenitic 6

Stainless and acid-resistant steels, ferritic/martensitic 7

Stainless and acid-resistant cast steel, austenitic 8

Heat-resistant cast steel 9

Special materials, non-magnetisable 9

Tool steels 10

Copper-tin and copper-tin-zinc casting alloys 11

Copper-zinc casting alloys 11

Copper-zinc casting alloys 13

Copper casting materials 13

Copper-aluminium casting alloys (standardised) 14

Copper-aluminium casting alloys (non-standardised) 15

The ZOLLERN Group ZOLLERN is one of the pioneers in the metal industry. At several locations in Europe, North America and Asia, 2,400 employees develop, produce and service a wide range of high-quality metal products. ZOLLERN supplies sophisticated solutions for a wide range of applications with its business areas of drive technology, investment casting, sand casting and forging, mechanical engineering elements and steel profi les.

Sand castingSuperior quality casting

In Laucherthal, castings have been made from metallic materials since the founding of the company in 1708. Apart from iron and steel, a bronze foundry was added around 1890. The emphasis today is on sand castings made of copper and copper alloys as well as high and low alloy steels.

For manually or machine formed parts, resin-bonded sands are used. This ensures a good surface, narrow tolerances as well as high-quality material. For special applications or requirements, we have the shell moulding process or utilisation of ceramic moulds and ceramic cores at our disposal.

Castings from copper alloys are possible to a delivery weight of approximately 7,000 kg, from steel to approximately 2,000 kg. Equipped with highly modern CNC machines, our machining workshops pre-process or finish castings according to customer drawings. In the laboratory and materials inspection, all standard destructive and non-destructive tests and examinations are available. Production is certified according to DIN EN ISO 9001 : 2008. For us, quality and delivery reliability are the prerequisites for success on the national and international market.

02 // 03Sand casting - Superior quality casting

Cast steel for general useDesignation Material

no.Standard Typical

heat treatment state

Mechanical and technological characteristics

Notched-bar impact work (ISO-V)

Annealing hardness

Intended use/ particular application examples

0.2% Proof stress Rp0.2

Tensile strengthRm (MPa)

Percent elongation at failureA5 (%) (HB)(J)

GS 38.3 1.0420 DIN 1681 EN 10293 annealed ≥ 200 ≥ 380 ≥ 25 ≥ 35

General mechanical engineering; good weldabili-ty; magnetically soft for pressure-bearing compo-nents in accordance with AD-W5 up to 300°CGE 200


General mechanical engineering; magnetically soft, at least 1.70 T at 100 A/cmGE 240

GS 52.3 1.0552DIN 1681 annealed ≥ 260 ≥ 520 ≥ 18 ≥ 27 General mechanical engineering; magnetically soft, at least 1.70 T at 100 A/cm(GE 260)


General mechanical engineering; magnetically soft, at least 1.70 T at 100 A/cmGE 300

Case-hardening steelsDesignation Material

no.Standard Typical



hardness Annealing hardness




Percent elongation at failureA5 (%) (HB)

C 15 1.0401DIN 17210 Case-

hardened ≥ 430 700-900 ≈12 - 143Parts for general mechanical engineering with low core strength; leversDIN EN 10084

14 NiCr 14 1.5752 WL 1.5752 Case- hardened ≥ 835 930-1230 ≈10 - 190Components resistant to sudden stress, tough at subzero temperature; high core strength even with thick cross sections; pinion shafts, pins

GS 15 CrNi 6

1.5919 DIN 17210 Case- hardened ≥ 680 1000-1300 ≈8 -

Parts subject to high stress with small wall thicknesses, inferior full hardening compared to 14 NiCr 141.5924 WL 1.5924

18 CrNi 81.5920

Case- hardened ≥ 785 1180-1420 ≈7 - 190

Machine components subject to highest amounts of stress, better full hardening compared to 17 CrNiMo 6, therefore particularly suited to larger parts1.5934 WL 1.5934

17 CrNiMo 6 1.6587

DIN 17210 Case- hardened ≥ 830 1050-1350 ≈8 - 183

Machine components subject to highest amounts of stressvery good wear resistanceDIN EN 10084

15 Cr 3 1.7015DIN 17210 Case-

hardened ≥ 440 690-880 ≈11 - 174Machine components subject to average stress, hig-her core strength compared to C 15; roller bearings, measuring toolDIN EN 10084

17 Cr 3 1.7016DIN 17210 Case-

hardened ≥ 450 750-1050 ≈11 - 174As 15 Cr 3, but slightly higher core strength; parts used in the construction of vehiclesDIN EN 10084

GS 16 MnCr 5 1.7131

DIN 17210Case-

hardened ≥ 600 800-1100 ≈10 - 164Standard quality for components subject to average and higher stress with cross sections that are not too large; cog toothed wheels, control components

DIN EN 10084

16 MnCrS 5 1.7139


As 16 MnCr 5; better and more uniform machining possible due to modified sulphur contentDIN EN 10084

GS 20 MnCr 5 1.7147


As 16 MnCr 5, but suitable for larger cross sections or higher core strengthsDIN EN 10084

Quenched and tempered, nitriding and spring steelsDesignation Material

no.Standard Typical



Hardness/Notchedbar impactwork (ISO-V)

(J)

Annealing hardness




Percent elongation at failure A5 (%) (HB)

GS C TL TL 2350-002 BWBQuenched and

tempered ≥ 785 930-1180 ≥ 10 260-330 ≤ 230Reinforced cast steel; for components with high heat-treated strength and toughness

C 22 1.0402DIN EN 10083 Quenched and

tempered ≥ 350 550-700 ≥ 15 - ≤ 160For components with small wall thickness and subject to low stress; mechanical engi-neering and apparatus constructionEN 10250


tempered ≥ 430 630-780 ≥ 15 - ≤ 185For thin-walled components subject to slightly higher stress in mechanical engineeringEN 10343


tempered ≥ 500 700-850 ≥ 10 - ≤ 210Castings of higher strength with smallcross sections and subject to average stressEN 10343


tempered ≥ 550 800-950 ≥ 10 - ≤ 230 For thin-walled castings of high strengthT1 - T2

CK 60 1.1221DIN EN 10083 Quenched and

tempered ≥ 580 850-1000 ≥ 8 - ≤ 240For components of high strength with small cross section/higher degree of purityT1 - T2

GS 36 CrNiMo 4 1.6511

DIN EN 10083

Quenched and tempered ≥ 900 1100-1300 ≥ 8 - 248

Quenched and tempered cast steel for com-ponents subject to high stress with good full quenching and subsequent drawing up to 50 mm wall thickness; parts subject to highest amounts of stress used in the construction of vehicles

EN 10297

30 CrNiMo 8 1.6580

DIN EN 10083 Quenched and

tempered ≥ 800 1000-1200 ≥ 8 - 248

Quenched and tempered cast steel for large cross sections; full quenching and subse-quent drawing up to 100 mm wall thickness possible; high toughness and elasticity

T1 - T2

67 SiCr 5 1.7103DIN EN 10132 Quenched and

tempered ≥ 1320 1450-1650 ≥ 3 - 240Castings subject to impact and bending stress with small cross sectionT - T4

60 SiCr 7 1.7108 DIN EN 10089Quenched and

tempered ~ 1100 1350-1550 ≥ 4 - ≤ 240Highly quenched and tempered compo-nents with high requirements in terms of spring characteristics

GS 25 CrMo 4 1.7218 DIN 17205 QT1 ≥ 450 600-750 ≥ 16 ≥ 40 J Parts used in mechanical engineering and apparatus constructionG 26 CrMo 4 1.7221 EN 10293 QT2 ≥ 550 700-850 ≥ 14 ≥ 18 J

GS 34 CrMo 4 1.7220 DIN 17205 QT1 ≥ 540 700-850 ≥ 12 ≥ 35 J High-strength quenched and tempered cast steel; wall thickness < 50 mmG 34 CrMo 4 1.7230 EN 10293 QT2 ≥ 650 830-980 ≥ 10 ≥ 27 J

GS 42 CrMo 4 1.7225 DIN 17205 QT1 ≥ 600 800-950 ≥ 12 ≥ 31 J Universal, high-strength quenched and tem-pered cast steel with average requirements in terms of toughnessG 42 CrMo 4 1.7231 EN 10293 QT2 ≥ 700 850-1000 ≥ 10 ≥ 37 J

42 CrMo S4 1.7227DIN EN 10083 Quenched and

tempered ≥ 750 850-1050 ≥ 8 - 240Equivalent to material 1.7225; good machi-nability due to modified sulphur contentT1 - T2

GS 50 CrMo 4 1.7228DIN EN 10083 Quenched and

tempered ≥ 800 1050-1250 ≥ 5 - 245Quenched and tempered cast steel equiva-lent to 1.7225;however with higher strengthT1 - T2

G 20 Mn 5 1.6220 EN 10293N

≥ 300480-620 ≥ 20 ≥ 50 J Material with high toughness,

also suitable for low temperaturesQT 500-650 ≥ 22 ≥ 60 J

15 CrMoV 59 1.8521 DIN 17211 Quenched and tempered ≥ 900 1000-1150 ≥ 10 ≥ 300 220Steel with good weldability even in quen-ched and tempered state; nitriding steel for machine parts subject to wear

GS 50 CrV 4 1.8159 SEW 835 Quenched and tempered ≥ 850 1100-1250 ≥ 6 ≥ 330 245Highly wear-resistant quenched and tempered steel with good toughness characteristics

58 CrV 4 1.8161 Quenched and tempered ≥ 1000 ≥ 1200 ≥ 5 -235 Components with maximum wear resi-stance; also spring steel; cog toothed

wheels, shafts

31 CrMoV 91.8519 DIN 17211 Quenched and

tempered ≥ 900 ≥ 1050 ≥ 10 - 248Quenched & tempered and nitriding steel for wear parts subject to high stress up to approx. 100 mm wall thickness1.8514 WL 1.8514

04 // 05 Cast steel for general use / Case-hardening steels / Quenched and tempered, nitriding and spring steels

Heat-resisting cast steelDesignation Material

no.Standard Typical




Thermal expansion between 20 and 300°C


0.2% proof stress Tensile strengthRm (MPa)

Percent elongation at failureA5 (%)20°C 590°C (J) α (10-6 K-1)

G X 20 CrCoMoV 12 21 1.4912 - Quenched and tempered - ≥ 340 780-980 ≥ 10 - -

Heat-resisting castings resistant to pressurized hydrogen for the chemical industry; Rp0.2 at least 340 MPa at 500°C

GS C 25 1.0619 DIN 17425 N ≥ 240 - 420-600 ≥ 22 ≥ 27 13.4 FittingsGP 240 GH EN 10213 QT ≥ 40

G X 22 CrMoV 12 11.4931

EN 10213QT ≥ 540 ≥ 340 740-880 ≥ 15 ≥ 27 11.5

Turbine construction; com-ponents that are exposed to rapid temperature changes (temperature shock)G X 23 CrMoV 12-1 EN 10293

G X 15 CrNiCo 21 20 20

1.4957 WL 1.4957 Cast state - ≥ 250 650-850 ≥ 10 - 15.8Aeronautics; turbines/air blades, combustion chambers, valves; up to approx. 730°C; for further data, see supple-ment 1 to 1.4957; non-sca-ling up to approx. 980°C; high-temperature; stainless

1.4971 ASTM A567 Or annealed

GS 16 CrMo 4 1.7242 - Quenched and tempered ≥ 345 - 540-690 ≥ 15 - -For castings up to max. 530°C application temperature can also be used as case-hardening steel

GS 17 CrMo 55 1.7357 EN 10213 QT ≥ 315 ≥ 180 490-690 ≥ 20 ≥ 27 13.4 Turbine construction, pressure vessels, steam boiler construc-tion

G 17 CrMo 5-5 EN 10293GS 17 CrMoV 5 11 1.7706 EN 10213 QT ≥ 440 ≥ 300 590-780 ≥ 15 ≥ 27 13.4G 17 CrMoV 5-10

Stainless and acid-resistant steels, ferritic/austeniticDesignation Material

no.Standard Typical


Mechanical and technological cha-racteristics


Thermal expansion between 20 and 300°C




Percent elongation at failureA5 (%) (J) α (10-6 K-1)

G X 4 CrNi 26-7 1.4347 EN 10283

Solution heat treated

and quen-ched

≥ 420 ≥ 590 ≥ 20 ≥ 30 14.5

Parts that require toughness with higher proof stress com-pared to austenitic steels with partially identical or better corrosion resistance, suitable filler material 1.4462, pump housing

G X 2 CrNiMoN 26-7-4 1.4469J93404

EN 10213 EN 10283

ASTM A 995


and quen-ched

≥ 480 ≥ 650 ≥ 22 ≥ 50

For heavy exposure to corro-sion, sea or brackish water, operating temperature up to 300°C

G X 2 CrNiMoN 22-5-3 1.4470J92205

SEW 400 EN 10283

ASTM A 995


and quen-ched

≥ 420 ≥ 600 ≥ 20 ≥ 30 13

Chemical and petro-chemical industry, high resistance to stress-crack corrosion in media containing chlorine; similar to 1.4462

G X 2 CrNiMoCuN 25-6-3-3 1.4517EN 10283


and quen-ched

≥ 480 ≥ 650 ≥ 22 ≥ 50 14.9

Chemical and petro-chemical industry, flue gas desulfuriz-ation; resistant to non-oxidi-zing acids, e.g. sulphuric acidG X 2 CrNiMoN 25-6-3 1.4468

Stainless and acid-resistant steels, ferritic/martensiticDesignation Material

no.Standard Typical




Annealing hardness




Percent elongation at failureA5 (%) (J) (HB)

G X 8 CrNi 13

1.4008

DIN 17445

QT ≥ 440 ≥ 570 ≥ 15 ≥ 27 170-240

Resistant to humidity, water, steam; pump parts, running wheels, running wheel blades; suitable welding filler 1.4009G X 7 CrNiMo 12-1 EN 10283

G X 20 Cr 14 1.4027 DIN 17445 SEW 410Quenched

and tempered ≥ 440 590-790 ≥ 12 - 170-240

For parts that must be resistant to humidity, steam, water and frequent handling. Suitable wel-ding filler 1.4009

X 46 Cr 13 1.4034 DIN 17440 Quenched and tempered - - - - (55 HRC)Heat-treatable cast steel for cutting tools, measuring tools, wear parts

G X 22 CrNi 17 1.4059 DIN 17445 SEW 410Quenched

and tempered ≥ 590 780-980 ≥ 4 - 230-300Corrosion-resistant, heat-treata-ble cast steel, e.g. for tow bars

X 14 CrMoS 17 1.4104 DIN 17440 SEW 310Quenched

and tempered ≥ 550 750-950 - - 225-275

As 1.4016. For castings that require elaborate, mechanical finishing. Welding not recom-mendable

G X 35 CrMo 17 1.4122

DIN 17442Annealed or

quenched and tempered

≥ 500 750-850 ≥ 10 - 220-280Parts for optical devices, medical instruments and measuring devices

SEW 400

G X 5 CrNi 13 4

G X 4 CrNi 13-4

1.4313 DIN 17445 QT1 ≥ 550 ≥ 760 ≥ 15 ≥ 50 240-300Water turbines and pump parts, suitable filler material 1.4351

1.4317 EN 10283 QT2 ≥ 830 ≥ 900 ≥ 12 ≥ 35 280-350

QT3 ≥ 500 ≥ 700 ≥ 16 ≥ 50

G X 5 CrNiMo 16 5 1 1.4405

SEW 410Quenched

and tempered ≥ 540 760-960 ≥ 15 ≥ 60 -

For parts with increased cor-rosion resistance compared to 1.4313; suitable welding filler 1.4405EN 10283

17/4 PH

1.4549 WL 1.4549

1.4549.4 ≥ 830 ≥ 900 ≥ 8 ≥ 30 HRC

Precipitation-hardened, stainless cast steel of high strength; aero-nautical material

0.04C 16Cr 4Ni 3Cu1.4549.5 ≥ 900 ≥ 1030 ≥ 6 ≥ 34 HRC

1.4549.6 ≥ 1100 ≥ 1240 ≥ 6 ≥ 40 HRC

G X 4 CrNiCuNb 16-4 1.4525 EN 10283QT1 ≥ 750 ≥ 900 ≥ 12 ≥ 20

QT2 ≥ 1000 ≥ 1100 ≥ 5

06 // 07Heat-resisting cast steel / Stainless, acid-resistant steels, ferritic/austenitic and ferritic/martensitic

Stainless and acid-resistant cast steel, austeniticDesignation Material

no.Standard Typical

heat treat-ment state



Annealing hardness





X 8 CrNiS 18 9 1.4305DIN 17440 Solution

heat tre-ated and

quenched≥ 175 440-640 ≥ 20 - 130-200

As 1.4308. For castings with extensive mechani-cal machining, primarily thread cutting; welding not recommendableEN 10088

G X 2 CrNiN 18 9

1.4306

SEW 410

AT ≥ 205 ≥ 440 ≥ 30 ≥ 80 130-200

Fittings and parts for pumps, centrifuges, etc.; suitable welding filler 1.4302, 1.4551, 1.4316; food processing industry, dairies, beverage indus-try; similar to 1.4309 and 304 L

X 2 CrNi 19 11 EN 10088

G X 2 CrNi 19-11 EN 10283

G X 6 CrNi 18 9

1.4308

DIN 17445

AT ≥ 175 ≥ 440 ≥ 30 ≥ 60 130-200Frequently used "V2A" quality; similar forging quality to 1.4301 and 304; fittings, pumps, food processing industry, dairies

G X 5 CrNi 19 10 EN 10283

X 5 CrNi 19-10

X 5 CrNiMo 17 12 2 1.4401 DIN 17440Solution

heat tre-ated and

quenched≥ 185 440-640 ≥ 20 ≥ 60 130-200

Castings with identical corrosion resistance and forging quality, but lower strength; as a casting material standardised under 1.4408; similar to 316 L

G X 2 CrNiMoN 18 10

1.4404

SEW 410Solution

heat tre-ated and

quenched≥ 205 440-640 ≥ 30 ≥ 80 130-200

Castings for which resistance to intergranular corrosion is paramount. After welding, no renewed heat treatment required; suitable welding filler1.4430, 1.4576; similar to 1.4409 and 316 LX 2 CrNiMo 17 12 2 EN 10088

G X 2 CrNiMo 19 11 2 1.4409 EN 10283Solution

heat tre-ated and

quenched≥ 195 440-640 ≥ 30 ≥ 80 130-200

Similar to 316 L; castings with increased resi-stance to intergranular corrosion after welding without further processing

G X 6 CrNiMo 18 10 1.4408

DIN 17445AT ≥ 185 ≥ 440 ≥ 20 ≥ 60 130-200

Castings for the pulp, textile and chemical industry; fittings, pumps; suitable welding filler 1.4403G X 5 CrNiMo 19-11-2 EN 10283

X 2 CrNiMoN17 13 51.4446

DIN 17445AT ≥ 210 ≥ 490 ≥ 20 ≥ 50 130-200

Good intergranular corrosion resistance, resistant in high chlorine concentrations and tempera-tures, good pitting resistance, chemical industryGX 2 CrNiMoN 17-13-4 EN 10283

X 2 CrNiMo 18 14 31.4435

S31603 CF3M

DIN 17440 MR 0175

ASTM A 743

Solution heat tre-ated and

quenched≥ 200 500-700 ≥ 30 ≥ 50 ≤ 215 Material in accordance with NACE MR 0175. Similar to 1.4439, 316 L

X 1 NiCrMoCuN 25 20 5 1.4539SEW 400

Solution heat tre-ated and

quenched

-220 - (≥ 35) (80)-

Good resistance to pitting and stress-crack corro-sion; full austenite; especially suitable for use in sea water; similar to 1.4584/1.4529G X 1NiCrMoCuN 25 20 5 1.4538 ≥ 185 ≥ 450 ≥ 30 ≥ 60

G X 5 CrNiNb 18 9 1.4552

DIN 17445AT ≥ 175 ≥ 440 ≥ 20 ≥ 35 130-200

Castings in the food processing, film, photo, paint, soap, paper, textile and saltpetre indus-tries; suitable welding filler 1.4551G X 5 CrNiNb 19-11 EN 10283

G X 5 CrNiMoNb 18 10 1.4581

DIN 17445AT ≥ 185 ≥ 440 ≥ 20 ≥ 35 130-200 As 1.4552; suitable welding filler 1.4576

G X 5 CrNiMoNb 19-11-2 EN 10283

Heat-resistant cast steel

Special materials, non-magnetisableDesignation Material

no.Standard Typical




Annealing hardness





G X2 CrNiMoN 18 14 1.3952SEW 395 Solution

heat treated and quen-

ched

≥ 240 490-690 ≥ 30 ≥ 80 130-200Non-magnetic casting material (VG 81236); resistant to intergra-nular corrosion; can be weldedWL 1.3952

G X12 CrNi 18 11 1.3955SEW 395 Solution

heat treated and quen-

ched

≥ 195 440-590 ≥ 20 ≥ 80 150-190 Non-magnetic casting material (VG 81236), can be weldedWL 1.3955

G X2 CrNiMnMoNNb 21 16 5 3 1.3964

SEW 395 Solution heat treated

and quen-ched

≥ 315 570-800 ≥ 20 ≥ 65 130-200

Non-magnetic casting material (VG 81236); very good corrosion resistance; particularly resistant to intergranular corrosion; can be welded, subsequent heat treat-ment not required

WL 1.3964

Designation Material no.

Standard Typical heat treatment state



Annealing hardness





G X 40 CrSi 13 1.4729DIN 17465

annealed - 490-750 ≥ 4 - 200-300For parts subject to minimal stress in industrial furnace construction up to 850°CEN 10295

G X 25 CrNiSi 18 9 1.4825DIN 17465

Cast state or annealed ≥ 230 ≥ 450 ≥ 15 - 130-200

For parts subject to minimal stress in industrial furnace construction up to 900°CEN 10295

G X 15 CrNiSi 25 20 1.4840 SEW 595 Cast state or annealed 205 440-640 15 - ≤ 230For parts in furnace and apparatus construction up to 1,100°C in oxi-dizing atmospheres

G X 40 CrNiSi 25 20 1.4848SEW 595


EN 10295

G X 40 NiCrSi 38 18 1.4865DIN 17465


For parts in industrial furnace construction with high tempera-ture fluctuation resistanceEN 10295

08 // 09Stainless and acid-resistant cast steel, austenitic / Heat-resistant cast steel / Special materials, non-magnetisable

Designation Material no.

Standard Typical heat treatment state

Chemical composition (approximate values %)

Properties Intended use/ particular application examples

C Si Mn Cr Mo V W

hardness(HRC)

Annealing hardness(HB)

100 Cr 6 1.2067 DIN EN ISO 4957 Hardened 1.0 0.2 0.3 1.5 - - - 64 230Wear-resistant tool steel, also for parts with high Hertzian contact stress, telescopic type ball bearing travellers, etc.

G X 38 CrMoV 5 1 1.2343 DIN EN ISO 4957 Hardened 0.4 1.0 0.4 5.2 1.3 0.4 - 50 235High-temperature tool steel for all non-cutting functions; working hardness 1180–1770 N/mm2

G X 40 CrMoV 5 1 1.2344 DIN EN ISO 4957 Hardened 0.4 1.0 0.4 5.2 1.3 1.0 - 51 230High-temperature and wear-resistant tool steel; working hardness 1180–1170 N/mm2

G X 100 CrMoV 5 1 1.2363 Hardened 1 0.3 0.5 5.1 1.0 0.2 - 63 230 Cutting and punching tools for average material thicknesses, cutting dies

G X 155 CrVMo 12 1 1.2379 DIN EN ISO 4957 Hardened 1.5 0.3 0.2 11.5 0.7 1.0 - 64 250 Dimensionally stable, super-speed steel for higher toughness stress

X 165 CrMoV 12 1.2601 Hardened 1.7 0.3 0.3 11.5 0.6 0.3 0.5 63 250

Steel resistant to corrosion to a limited extent for plate, wire, punching and cutting tools. Tools for moulding ceramic shells

90 MnCrV 8 1.2842 DIN EN ISO 4957 Hardened 0.9 0.3 2 0.3 - 0.1 - 64 220

Cutting and punching tool, small shear blades, higher toughness compared to 1.2060, 1.2067, 1.2419, 1.2210, yet slight-ly reduced wear resistance

Tool steels

Copper-tin and copper-tin-zinc casting alloysZollerndesignation

Standards Minimum valuesfrom the tensile specimen

Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

RG 5

EN 1982 CC491K CuSn5Zn5Pb5-CDIN 1705 2.1096 G-CuSn5ZnPb5

USA ~ C83600UK LG2

F U-E5Pb5Z5

GSGZ

90110

200250

1313

6065

Thin-walled castings, water and steam fittings up to 225°C

RG 6EN 1982 CC492K CuSn7Zn2Pb3-C

DIN 1705 2.1093 G-CuZn6ZnNiUK ~ LG 4

GSGZ

130130

230260

1412

6570

Suitable for pressure-tight parts due to additi-onal Ni contentfittings and pump housing up to 225°C

RG 7

EN 1982 CC493K CuSn7Zn4Pb7-CDIN 1705 2.1090

USA ~ C93200F U-E7Z5Pb4

GSGZ

120120

230260

1512

6070

Through higher Pb content good emergency running properties, sliding strips, sliding platesslide bearing shells or bushings up to 4kN/cm2 maximum load, unhardened steel as shaft is an option

GBz 10

EN 1982 CC480K CuSn10-CDIN 1705 2.1050 G-CuSn10

USA ~ C90700GB CT1

GSGZ

130160

250280

1810

7080

Tin bronze with relatively high elongationfittings and pump housingguide, running and paddle wheels forpumps and water turbines

GBz 12

EN 1982 CC483K CuSn12-CDIN 1705 2.1052 G-CuSn12

USA ~ C90700 GB PB2

GSGZ

140150

260280

75

8090

Good sliding properties and wear resistance, hinged blocks, hydraulic parts, sliding strips spindle nuts, cylinders for axial pistons

GBz 12 NiEN 1982 CC484K CuSn12Ni2-C

DIN 1705 2.1060 G-CuSn12Ni USA ~ C91700

GSGZ

160180

280300

128

8595

As GBz12, but higher wear resistancehigh-speed, low-noise transmissions subject to higher stress, in endurance runs up to 1.25 kN/cm2, over short periods also 4.0-4.5 kN/cm2, particularly suitable for worm wheels through additional Ni content, but also for same appli-cations as GBz 10

GBz 12 Pb EN 1982 CC482K CuSn11Pb2-CDIN 1705 2.1061 G-CuSn12Pb GSGZ

130150

240280

55

8090

Good emergency running properties through higher Pb contenthigh wear resistance, for slide bearings subjectto impact-type stress up to 12 kN/cm2crank and toggle bearings, highly stressed high-speed spindle nuts, sliding parts, sliding strips but not suitable for worm wheels

mechanical properties pursuant to EN 1982 GS = sand casting (values also for shell-mould casting) GZ = centrifugal casting

• Young's modulus ~ 90 - 105 kN/mm2 • Electric conductivity ~ 5-8 MS/m• Density ~8.6-8.7 kg/dm3 • Thermal conductivity ~ 0.54-0.59 W/cm.K• Thermal expansion coefficient ~ 17-18 . 10-6/K• Permeability < 1.01 µr

All alloys are resistant against drinking water, sea water, oils, soap solutions, milk

10 // 11 Tool steels / Copper-tin and copper-tin-zinc casting alloys

Copper-zinc casting alloysZollerndesignation


Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

BZG

Non-standardised bearing casting mate-rial

better sliding properties (Si, Pb) ~ CuZn37Mn2Al2Ni1SiPb-C

composition similar to CW713R

GSGZ 200 450 10 ~ 150

Preferred for sliding-stressed parts, up to 10 m/s sliding velocity, average compressive loads per unit area spindle and pressure nuts, bearing and guide bushings, bearing rings, worm wheel rims cast or produced from centrifugal casting

PB

EN 1982 CC765S CuZn35Mn2Al1Fe1-CDIN 1709 2.0592 G-CuZn34Al1

USA ~ C86500UK HTB1

GSGZ

170200

450500

2018

110120

Moderate sliding properties, tough pressure nuts for rolling mills and spindle presses with higher additional Ni content also for ship superstructures, on-board tableware, propeller hubs and blades

ZB37

EN 1982 CC764S CuZn34Mn3Al2Fe-CDIN 1709 2.0596 G-CuZn34Al2

USA ~ C86200F U-Z36N3

GSGZ

250260

600620

1514

140150

Statically stressed construction parts, valve and control units, bevel only with good lubrication for bearing, guide rings, sliding blocks, pressure and adjustment nuts with low sliding velocities, low emergency running properties

ZB 80EN 1982 CC761S CuZn16Si4-C

DIN 1709 G-CuZn15Si4USA C87500

GSGZ

230300

400500

108

100130

Very good casting capability, good sea water resistance, low permeability < 1.01, suitable for pressure-tight, thin-walled parts such as sea water pump housings and fittings, water tanks, heat exchanger parts, also parts for mechanical engineering, the electronics indus-try and precision engineering

ABG

EN 1982 CC762S CuZn25Al5MN4Fe3-CDIN 1709 2.0598 G-CuZn25Al5

USA ~ C86300GB HTB3

F ~ U-Z19A6

GSGZ

450480

750750

85

180190

Bearing material with high stress capability, only for low sliding velocities, moderate sliding properties, bearing bushings in construction machines, such as excavator arms, slow-run-ning worm wheel rims, slide and guide rails


• Young's modulus ~ 90 - 110 kN/mm2 • Electric conductivity ~ 3-8 MS/m• Density ~8.1-8.3 kg/dm3 • Thermal conductivity ~ 0.42 W/cm.K• Thermal expansion coefficient ~ 18-19 . 10-6/K• Permeability < 1.03 µr

Copper-nickel casting alloysZollerndesignation


Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

GN 10

EN 1982 CC380H CuNi10Fe1Mn1-CDIN 17658 2.0815 G-CuNi10

USA C96200F U-N10Fe1M

GSGZ

120100

280280

2025

7070

Very good resistance against sea water, bra-ckish water, chloride-containing wastewater, brine solutions for power plants, refineries, desalination plants, chemical industry, drilling platforms, petroleum production fittings, valve parts, oil and water cooling tanksGN 30

EN 1982 CC383H CuNi30Fe1Mn1NbSi-CDIN 17658 2.0835 G-CuNi30

USA C96400F U-N30M1Fe

GS 230 440 18 115


• Young's modulus ~ 120 - 145 kN/mm2 • Electric conductivity ~ 2-6 MS/m• Density ~ 8.9 kg/dm3 • Thermal conductivity ~ 0.30-0.60 W/cm.K• Thermal expansion coefficient ~ 15-16 . 10-6/K• Permeability < 2 µr

Copper casting materialsZollerndesignation


Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

WKG L45

EN 1982 CC040A Cu-C, Type BDIN 17665 2.0082 G-Cu L45

USA ~ C80100UK HCC1F ~ Cu/c1

GS 40 150 25 40

Electric conductivity ≥ 45 MS/m thermal con-ductivity 3.09 W/cm.K parts with higher conductivity in electrical mechanical engineering, general mechanical engineering, smelting technology, power sup-ply, contact parts, cooling elements

CCG

EN 1982 CC140C CuCr1-CDIN 17665 2.1292 G-CuCr F35

USA ~ C81500UK CC!-WP

F U-Cr0.8Zr

GS 200 300 10 95

Electric conductivity ≥ 45 MS/mthermal conductivity ~ 3.14 W/cm.KAs WKG, but higher wear resistancealso for welding guns, electrode holders, clam-ping jaws for resistance welding equipment

mechanical properties pursuant to EN 1982 GS = sand casting (values also for shell-mould casting)

• Young's modulus ~ 100 kN/mm2 • Density ~ 8.9 kg/dm3 • Thermal expansion coefficient ~ 17 . 10-6/K• Permeability < 1.01 µr

12 // 13Copper-zinc casting alloys / copper-nickel casting alloys / copper casting materials

Copper-aluminium casting alloys (standardised)Zollerndesignation


Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

AB 9 EN 1982 CC330G CuAl9-C GSGZ120160

340450

1515

80100

Low permeability < 1.01 also resistant against diluted sulphuric acid, castings for the che-mical and food industry, such as screw con-veyors, feed-in trays, mixing arms, pickling racks and hooks

TUBG

EN 1982 CC331G CuAl10Fe2-CDIN 1714 2.0940 G-CuAl10Fe

USA ~ C95200UK AB1

F ~ U-A10Fe

GSGZ

180200

500550

1818

100130

Low temperature dependency of the proper-ties between -200 und +200°C, good corrosion resist. paddle wheels, pump wheels, fittings, bevel wheel sea water applications if Al < 8.2+0.5Ni (%)

EBG 9 EN 1982 CC332G CuAl10Ni3Fe2-CDIN 1714 2.0970 G-CuAl9NiGSGZ

180220

500550

1820

100120

Sea water resistant copper-aluminium bronze, no risk of stress-crack corrosion, as bearing material for parts subject to high stress and slower sliding velocities < 1 m/sgood lubrication requiredgood weldability, also with composite constructions, with increasing aluminium content greater wear-resistance and cavitati-on resistance, but also less elongation

running wheels, pump housing and blades, ship propellers, ship superstructures, on-board tableware, turbine wheels, superheated steam fittings, engine components, stirrers, pickling hooks, mixing arms for the chemical industry, heat exchangers, worm wheels, toggle bearin-gs, sliding and pressure parts, wear parts

EBG 9 - very good weldability

EBG - most often implemented, very good combination of strength and toughness

MEBG, AMB3 for special requirements in shipbuilding low permeability < 1.02 or < 1.05

VBG - highest wear resistance and stress capability

EBG

EN 1982 CC333G CuAl10Fe5Ni5-CDIN 1714 2.0975 G-CuAl10Ni

USA ~ C95500, ~ C95800UK ~ AB2F U-A10N

GSGZ

250280

600650

1313

140150

VBGEN 1982 CC334G CuAl11Fe6Ni6-C

DIN 1714 2.0980 G-CuAl11NiUSA ~ C95500

GSGZ

320380

680750

55

170185

MEBG WL 2.0968 G-CuAl9Ni7 GSGZ230290

490490

107

125130

AMB3 DIN 1714 2.0962 G-CuAl8Mn GSGZ180200

440500

1818

105105

mechanical properties pursuant to EN 1982 or WL 2.0968 and DIN 1724 - 2.0962 GS = sand casting (values also for shell-mould casting) GZ = centrifugal casting

• Young's modulus ~ 90 - 125 kN/mm2 • Electric conductivity ~ 2-9 MS/m• Density ~7.5-7.6 kg/dm3 • Thermal conductivity ~ 0.34-1.13 W/cm.K• Thermal expansion coefficient ~ 14-18 . 10-6/K• Permeability < 1.01 to < 1.9 µr

Copper-aluminium casting alloys (non-standardised)Zollerndesignation

Notes Minimum valuesfrom the tensile specimen

Min.hardness


Rp0.2N/mm2

RmN/mm2

A5%

HB10/1000

TZB 28TZB 32TZB 36

Al content > 13%Tensile specimen frequently not possible

only hardness is guaranteedvery brittle

GS 450-600500-650

0.5-1.5

260-300300-340340-380

Deep drawing tools for reshaping of titanium, Hastelloy and austenitic steel, low friction coefficient, no welding profile and straigh-tening rolls, bending tools

SMBG Sliding material, similar toforged material 2.0960GSGZ

140180

440540

1112

105110

For parts subject to sliding stress, oil lubrica-tion required, worm wheels, sliding blocks, spindle nuts, guide rails, also suitable for refrigeration technology

AMBG Sliding material, similar toforged material 2.0936 (CW306G)GSGZ

220250

490590

812

130130

For parts subject to sliding stress, MoS lubri-cation required, worm wheels, sliding blocks, bushings, bearings subject to impact-type oscillating stresses also for higher tempera-tures such as roller conveyors of continuous casting plants, foundry machines

mechanical properties pursuant to EN 1982 or WL 2.0968 and DIN 1724 - 2.0962 GS = sand casting (values also for shell-mould casting) GZ = centrifugal casting

• Young's modulus ~ 105 - 115 kN/mm2 • Electric conductivity ~ 3-6 MS/m (SMBG, AMBG)• Density ~ 7.6 kg/dm3 TZB ~ 7.2 kg/dm3 • Thermal conductivity ~ 0.45 W/cm.K (SMBG, AMBG)• Thermal expansion coefficient ~ 15-18 . 10-6/K (SMBG, AMBG)

For sand and shell-mould casting, the mechanical properties are determined from separately or integrally cast specimen rods, with centrifugal casting (only copper alloys), directly from the casting, in doing so, the specified values apply only for wall thicknesses up to 50 mm.

All information presented in this brochure was prepared with great diligence. Any warranty of quality or qualities is not connected therewith. Zollern does not assume any guarantee or liability.

Applicable are the provisions stipulated in arrange-ments and/or provisions as agreed on in the individual contract or in the General Terms and Conditions.

14 // 15 Copper-aluminium casting alloys (standardised) / copper-aluminium casting alloys (non-standardised)

ZOLLERN GmbH & Co. KG

Hitzkofer Strasse 1 72517 Sigmaringendorf-Laucherthal GermanyT +49 7571 70-0 F +49 7571 70-602 [email protected] www.zollern.com

Group headquarters

Subsidiaries & local offices

Plants

© Z

OLLE

RN I

09.19

I 08

1 I w

ww

.crea

ktiv

-wer

bung

.com

Er

rors

and

am

endm

ents

exc

epte

d. P

ictu

res a

nd ill

ustr

atio

ns si

mila

r.

IATF 16949

casting and forging cast steel and copper casting alloys...din 17210 case- hardened ≥ 440 690-880...

Documents