cameron api

A CameronIntroduction to AmericanPetroleum InstituteSpecificationsAPI 6A (ISO 10423):Specification for Wellhead and Christmas Tree Equipment

API Q1: Specification forQuality Programs, the APIMonogram Program and ISO-9000 Accreditations.

Cameron Locations

POLICY

The Cameron Division of Cooper Cameron Corporation supports the

development and use of international product standards such as those

published by API and ISO. These standards provide a common basis for

product characteristics and performance attributes and act to capture

the successful industry history associated with these products. Products

marketed, designed, manufactured and used in compliance with

recognized industry standards add significant value to our industry.

Cameron endorses the API monogram program and API Quality Program

Specification Q1. API Q1 applies the recognized benefits of the ISO 9001

Quality Program elements tailored specifically to the oil and gas industry.

The API monogram program joins the assessment of Quality programs

with the demonstrated ability to comply with international product

standards such as API Specification 6A (ISO 10423) for Wellhead and

Christmas Tree Equipment.

© CAMERON, P.O, Box 1212, Houston TX, 77251-1212, Tel: 713.939.2211 Fax: 713.939.2620, http://www.camerondiv.com

Specification for Wellhead andChristmas Tree Equipment

API SPECIFICATION 6A

API Specification 6A (ISO 10423) is the recognized industry standard for

Wellhead and Christmas Tree Equipment which was formulated to

provide for the availability of safe, dimensionally and functionally

interchangeable Wellhead and Christmas Tree Equipment. This

specification includes detailed requirements for the manufacture of

tubular suspension equipment, valves and fittings used at the location

of oil and gas wells to contain and control pressure and fluid flows.

Specification 6A also serves as the reference source for the design of

flanged end and outlet connections for use at 2,000 to 20,000 psi

maximum rated working pressures and a family of gate valves for use

over these same pressure ranges. API Specification 6A is also specified

as the base standard for

manufacture of subsea

equipment in accordance with

API Specification 17D.

The current edition of API 6A,

includes requirements for

Surface Safety Valves (SSV)

and Underwater Safety Valves

(USV).



EQUIPMENT

WellheadEquipment

Casing HeadHousing

Casing HeadSpools

Tubing HeadSpools

CrossoverSpools

MultistageHead Housing

& Spools

CrossoverConnectors

Tubing HeadAdapters

Top Connectors

Tees andCrosses

Fluid SamplingDevices

Adapter andSpacer Spools

Other EndConnectors(Proprietary)

MandrelHangers

Slip Hangers

SingleCompletion

Valves

MultipleCompletion

Valves

Actuated Valves

Valves Preparedfor Actuators

Check Valves

Chokes

SSV/USV &Actuators for

Offshore Services

Weld NeckConnectors

BlindConnectors

ThreadedConnectors

Adapter andSpacer

Connectors

Actuators

Ring Gaskets

Bull PlugsRunning Tools

Valve Removal PlugsWear Bushings

Connectors andFittings

Casing & TubingHangers

Valves andChokes

LooseConnectors

OtherEquipment

API Specification 6A (ISO 10423) covers Wellhead and Christmas TreeEquipment as follows:


PRODUCT SPECIFICATION LEVELS (PSL’s)

API Specification 6A (ISO 10423) provides definition of standard service

conditions and introduces the concept of product specification levels

(PSL’s) which will be referred to throughout the document. The PSL’s

define different levels of effort, or levels of technical requirements

which may be specified for a product. Generally, these levels represent

industry practice for various service conditions. The decision tree shown

below is designed to assist the purchaser in selecting the proper

specification levels (PSL’s) for primary parts of Wellhead and Christmas

Tree Equipment.

START HERE

YES YES

YES

NONO

NO

YES YES YES

NO NO

NO

NO

YES

YES

NO

PSL-3G

PSL-3G

PSL-3

PSL-3G

PSL-3

PSL-2

PSL-3

PSL-2

PSL-2

PSL-3

PSL-2

PSL-1

PSL-1

RATED WORKINGPRESSURE ≥103.5MPa (15,000 PSI)

HIGH H2S

CONCENTRATION ?

GAS WELL

NACE ?HIGH H2S

CONCENTRATION ?RATED WORKING

PRESSUREGAS WELL

RATED WORKINGPRESSURE

GAS WELL



GAS WELL

> 34.5 MPa (5,000 PSI )

≤ 34.5 MPa (5,000 PSI )

> 34.5 MPa (5,000 PSI)

≤34.5 MPa (5,000 PSI)

> 34.5 MPa (5,000 PSI)

≤ 34.5 MPa (5,000 PSI)

≤ 34.5 MPa (5,000 PSI)

> 34.5 MPa (5,000 PSI)


PRESSURE RATINGS

TEMPERATURE CLASSES

Six pressure ratings from 2,000 to 20,000 psi represent the maximumworking pressure of the equipment.

API Pressure Rating in PSI

2,000 13.8

3,000 20.7

5,000 34.5

10,000 69.0

15,000 103.5

20,000 138.0

API Pressure Rating in MPa

Eight Temperature Classes, each of which represent a range oftemperatures from the minimum ambient air temperature to themaximum temperature of the well fluid passing through or contained by the equipment.

API TEMP. CLASSIFICATION

OPERATING RANGE(DEG. F)

(MIN.) (MAX.)

OPERATING RANGE(DEG. C)

(MIN.) (MAX.)

K -75 TO 180

-50 TO 180

-20 TO 180

ROOM TEMPERATURE

0 TO 150

0 TO 180

0 TO 250

35 TO 250

-60 TO 82

-46 TO 82

-29 TO 82

ROOM TEMPERATURE

-18 TO 66

-18 TO 82

-18 TO 121

2 TO 121

L

P

R

S

T

U

V

Note: These temperature classes can be used in combination with one another to achieve a wider rating. Forinstance, a common rating for 6A gate valves is P+U (-20 to 250° F).

Corrosion Resistant Alloyb


MATERIAL CLASSES

There are seven Material Classes which specify minimum materialrequirements for general or sour service shown below. API 6A (ISO 10423) equipment must be designed, tested and marked assatisfactory for one of these Material Classes.

Minimum Material Requirements

API Material ClassBody, Bonnet, End & Outlet

ConnectionsPressure Controlling Parts,Stems, & Mandrel Hangers

AA - General Service Carbon or low alloy steel

Carbon or low alloy steel

Stainless Steel

Carbon or low alloy steelb


Stainless steelb

Corrosion Resistant Alloyb

Carbon or low alloy steel

Stainless steel

Stainless Steel


Stainless steelb

Stainless steelb

BB - General Service

CC - General Service

DD - Sour Servicea

EE - Sour Servicea

FF - Sour Servicea

HH - Sour Servicea

aAs defined by National Association of Corrosion Engineers (NACE) Standard MR0175bIn compliance with NACE Standard MR0175Only the most stringent classification is marked.

ANNEX F TESTINGPerformance verification testing is often performed on prototypes orproduction models of API Specification 6A (ISO 10423) equipment toensure that the performance requirements (PR’s) specified for pressure,temperature, load, mechanical cycles, and standard test fluids are met in the design of the product.

Performance Verification Testing may include:Pressure/Temperature CyclesLoad/Mechanical CyclesNonmetallic Seal Thermochemical Testing

Scalable Performance Verification levels (i.e. PR1, PR2) are applicable tomany API 6A products. Although Annex F Testing is not a requirement inAPI 6A, Cameron is proud to offer a wide variety of products proven tomeet, and often exceed the performance verification requirements of API 6A Annex F.


WELDING

Quality control requirements for welding generally increase as the PSLlevel increases from 1 through 3 with each level building on the levelbelow it. No welding is permitted on PSL-4 equipment except for corrosion resistant alloy overlays. The following table applies topressure containing fabrication and repair weldments for bodies,bonnets, and end and outlet connections:

Weld ProcedureQualification

WelderPerformanceQualification

WeldingConsumables,

InstrumentCalibration

Visual Exam ofWeld

Weld Surface NDE: PT/MT

Weld VolumetricNDE: UT/RT

Weld HardnessTesting

ASME SECT. IXWith

Hardness Survey

ASME SECT. IX

DocumentedControlsRequired

_

_

_

_

Same as PSL-1 plusBase MetalGrouping

Same as PSL-1 plusHole Qualification

Same as PSL-1

Required

Required

Required For AllFabrication Welds and Repair Welds

>25% of Wall

Required For AllFabrication Welds and Repair Welds

>20% of Wall

_

Same as PSL-2 plusChemical Analysis

and PWHT Controls

Same as PSL-2

Same as PSL-1

Required

Required

Required

No Welding AllowedExcept for

Corrosion Resistant Alloy Overlays

No Welding AllowedExcept for

Corrosion Resistant Alloy Overlays

PSL-1 PSL-2 PSL-3 PSL-4


QUALITY CONTROL

Specification 6A (ISO 10423) describes pertinent information oninspections, tests, examinations, and required documentation. Since theselection of Product Specification Level (PSL) is ultimately a purchaser’sdecision, quality control information is provided to make it easy for usersto select the PSL level consistent with their risk management needs.

Quality Control Requirements for Equipment

Requirements

Drift Test Yes Yes Yes Yes

Hydrostatic Test Yes Yes Yes, Extended Yes, Extended

Gas Test _ _ – Yes

AssemblyTraceability _ _ Yes Yes

Serialization _ Yes Yes Yes


Yes

Yes, Extended

Yes

Yes

Yes

PSL-3G


QUALITY CONTROL

Quality Control Requirements for Bodies, Bonnets, and End andOutlet Connections

Requirements

Tensile Testing Yes Yes Yes Yes

Impact Testing K, L K, L, P Yes Yes

Hardness Testing Sampling Single Multiple Multiple

DimensionalVerification Sampling Sampling Yes Yes

Traceability _ Yes Yes Yes


Chemical Analysis _ Yes Yes Yes

Visual Examination Yes Yes _ _

Surface NDE _ Yes Yes Yes

Weld NDE _ Yes Yes Yes

Serialization _ _ Yes Yes

Volumetric NDE _ _ Yes Yes

Definitions:

End and Outlet Connections - Integral threads, male or female; flanges, studded or through-bolted; or anyother means used to join together equipment that contains or controls pressure.

Body - Any portion of API Spec 6A equipment between end connections, with or without internal parts,which contains well-bore pressure.

Bonnet - A pressure-containing closure for a body, other than an API end or outlet connection.

MARKINGS

Section 8 of Specification 6A and the chart below describemarking instructions for equipment. The marking requirementsinclude the following:


CC-OKC API 13–5/8" 5000 PSI S AA 1 PR2 6-01

Manufacturer‘sMark

Monogram

NominalSize

Rated WorkingPressure

TemperatureClass

MaterialClass

ProductSpecification

Level

PerformanceRequirement

Level

Date of FinalAcceptance

HOW TO ORDER

The following data sheet is included as a worksheet for assemblinginformation needed to place an order:

Well name(s) and location(s): __________________________________________________________________Maximum operating pressure: __________________________________________________________________Anticipated wellhead shut-in pressure: __________________________________________________________Temperature ranges anticipated: ________________________________________________________________Minimum ambient temperature: ________________________________________________________________Maximum flowing fluid temperature at wellhead: ________________________________________________Anticipated composition of produced fluids: CO2 __________ ppm ___________ Chlorides ________ppm___________________________H2S ______________ppm ______________ Other ______________

Anticipated completion or future workover or recovery operations which would affect pressure,temperature, or fluid content __________________________________________________________________New values:_________________________________________________________________________________Are there any government regulations that will apply or must be met by this equipment?_______________If so, which one(s)? __________________________________________________________________________Water or brine pH: Does NACE MR0175 apply?Will scale, paraffin, corrosion, or other types of inhibitors be used? __________________________________Inhibitor type: _______________ Inhibitor carrier: _______________ Batch or continuous inhibition? ______Will acidizing be performed? ________________________________ Type of acid: ______________________Anticipated production rates: ______________________ M3/D oil/condensate

______________________ M3/D gas______________________ M3/D S&W

Will erosion be concern? ____________________ Cause: __________________________________________External coating? Yes, Type _________________________ No _________________Internal coating? Yes, Type__________________________No _________________Delivery requirements: ____________________________________________________________________________________________________________________________________________________________________Special shipping, packing and storage instructions: ________________________________________________

Casing Program

Top Joint String

Size (OD) Wt., Kg/m (lb/ft) Grade Connection Total String Bit SizeHanging Wt. in mmin DaN (lbs) (in)

Conductor ________ ________ ________ ________ ________ ________Surface Csg. ________ ________ ________ ________ ________ ________Protective Csg ________ ________ ________ ________ ________ ________Production Csg. ________ ________ ________ ________ ________ ________Tubing ________ ________ ________ ________ ________ ________

Type of Completion: single or multiple: ________________

Technical contact in buyer’s organization: ________________________________________________________Phone: ________________________________________________________

For more information, contact your local Cameron representative.Cameron, P.O. Box 1212 • Houston, TX 77251-1212 • Tel: (713)939-2211 • FAX: (713) 939-2620http://www.camerondiv.com

EXHIBIT A1 – GENERAL WELLHEAD EQUIPMENT DATA SHEET

API Q1: Specification for Quality Programs, the APIMonogram Program and ISO-9000 Accreditations.

SO9000 A

ccredtat

on

s.


API SPECIFICATION Q1

OVERVIEWAPI Q1 is intended to be used in conjunction with international oil and gasproduct standards by internationally licensed manufacturers. Used in thismanner, API Q1 delivers significant value to the industry by providing acohesive link between the accreditation of a manufacturer’s quality systemwith their ability to provide products meeting industry and customerrequirements.

API Specification Q1 differs from generic quality systems, (e.g., ISO 9000Series), by its role in the voluntary licensing of manufacturers to provide oiland gas industry products in accordance with API specifications. API licensesare only issued after an on-site survey has confirmed that the licensee adheresto the requirements of both the quality system standard API Q1 and therequirements of an international oil and gas product specification recognizedby the oil and gas industry and API. In contrast, generic quality systemrequirements are normally intended to be applied to any industry or productthrough contractual agreements with or without industry standards orspecifications.

Typical Quality Program Elements (API Q1)1 SCOPE 2 REFERENCES3 DEFINITIONS4 QUALITY SYSTEM REQUIREMENTS4.1 MANAGEMENT RESPONSIBILITY4.2 QUALITY SYSTEM4.3 ORDER REVIEW4.4 DESIGN CONTROL4.5 DOCUMENT AND DATA CONTROL4.6 PURCHASING4.7 PURCHASER-SUPPLIED PRODUCT4.8 MATERIAL/PRODUCT

IDENTIFICATION AND TRACEABILITY4.9 PROCESS CONTROL4.10 INSPECTION AND TESTING

Typical Quality Program Elements (ISO 9001 – 2000)1 SCOPE 2 NORMAL REFERENCES3 TERMS AND DEFINITIONS4 QUALITY SYSTEM REQUIREMENTS5 MANAGEMENT RESPONSIBILITY6 RESOURCE MANAGEMENT7 PRODUCT REALIZATION8 MEASUREMENT, ANALYSIS AND IMPROVEMENT

4.11 INSPECTION, MEASURING, AND TEST EQUIPMENT

4.12 INSPECTION AND TEST STATUS4.13 CONTROL OF NONCONFORMING

PRODUCT4.14 CORRECTIVE ACTION4.15 HANDLING, CLEANING, STORAGE,

PACKAGING, AND DELIVERY4.16 QUALITY RECORDS4.17 INTERNAL QUALITY AUDITS4.18 TRAINING, INDOCTRINATION,

AND QUALIFICATION4.19 SERVICING4.20 STATISTICAL TECHNIQUES


Cameron is proud to maintain API and ISO accreditations at our manufac-turing and repair facilities. In fact, Cameron holds the largest number of APIlicenses in the industry. These accreditations, however, only make up a partof Cameron’s commitment to quality. We invite you to contact your localCameron representative and review our commitment to quality in detail.

API and ISO ACCREDITATIONS

API 6A API 6D API 16A API 16C API 16R API 17DPlant Wellhead & Ball Drill Through Drilling API 16D Marine Subsea ISO

Locations Xmas Trees Valves Equipment Chokes Controls Drilling Riser EquipmentCouplings

Western HemisphereBrookshire 0126 ISO 9001Edmonton (CC) 0418.5 0086.3 ISO 9001Edmonton (CCV) 0244.5Houston–Actuators 0506 0014 0022 ISO 9001Houston–Controls 0012 0015 ISO 9001Liberty 0418 0244 0086 0001 0028 ISO 9001Little Rock 0073 ISO 9001Livingston, TX 0276Maracaibo (CC) 0042.27 0086.9 ISO 9002Oklahoma City (CCV) 0418.2 0244.2 ISO 9001Oklahoma City (CC) 0418.13 0244.10 ISO 9001Patterson 0418.3 0244.3 0086.1 0006.1 0007.1 ISO 9001Sao Paulo ISO 9001Veracruz 0148.8 0121.8 ISO 9001Ville Platte 0244.4 ISO 9001Zarate 0418.7 0244.7 0086.5 ISO 9001

Eastern HemisphereAberdeen ISO 9001Beziers 00418.9 00244.8 0086.6 0006 0007.4 ISO 9001Celle 00418.19 0086.8 0006 0007.6 ISO 9001Hoogezand ISO 9002Leeds 0418.10 0086.7 0007.5 ISO 9001Livingston, Scotland 0291 ISO 9001Longford 00418.20 0007.7 ISO 9001Randaberg, Norway 0418.22 ISO 9001

Asia Pacific / Middle EastBatam 0223 0000 ISO 9002Darul, Malaysia 0418.12 0244.9 0007.8 ISO 9002Deer Park, VictoriaAustralia 0042.18 0014.9 0001.6 ISO 9001

Oman 0516 ISO 9002

Singapore 0418.6 0244.6 0086.4 0007.3 ISO 9001

CAMERON LOCATIONS

LOCATIONS

DOMESTICAlaska600 East 57th PlaceAnchorage, Alaska 99518-5761Phone: (907) 562-2332Fax: (907) 562-3880

California3004 Jewett Ave.Bakersfield, California 93301(P.O. Box 3545, Bakersfield, CA 93385)Phone: (661) 323-8183Fax: (661) 323-0946

418 Baylor DriveWoodland, California 95695Phone: (530) 668-8069Fax: (530) 688-0948

Colorado1660 Lincoln, Suite 2950Denver, Colorado 80264Phone: (303) 861-1850Fax: (303) 861-1868

710 23-1/4 RoadGrand Junction, Colorado 81505Phone: (970) 241-5711Fax: (970) 241-5730

LouisianaHighway 182Berwick, Louisiana 70342(P.O. Box 457, Berwick, LA 70392)Phone: (985) 395-6171Fax: (985) 395-1257

650 Poydras St.Poydras Center, Suite 2310New Orleans, Louisiana 70130Phone: (504) 529-7634Fax: (504) 522-8837

Highway 90 EastPatterson, Louisiana 70392(P.O. Box 457, Patterson, LA 70392)Phone: (985) 395-6171Fax: (985) 395-1257

10361 MeadowviewKeithville, Louisiana 71047(P.O. Box 18978, Shreveport, LA 71138)Phone: (318) 925-6200Fax: (318) 925-5040

Mississippi1020 Hillcrest DriveLaurel, Mississippi 39440(P.O. Box 3039, Laurel, MS 39442)Phone: (601) 649-8900Fax: (601) 649-8909

New Mexico503 South Behrend Ave.Farmington, New Mexico 84701Phone: (505) 327-3402Fax: (505) 327-0454

500 North LeechHobbs, New Mexico 88240Phone: (505) 397-1325Fax: (505) 393-5957

Oklahoma4341 S.W. 33rd StreetOklahoma City, Oklahoma 73119Phone: (405) 682-1661Fax: (405) 682-1051

7500 S.W. 29th StreetOklahoma City, Oklahoma 73179(P.O. Box 75308, Oklahoma City, OK 73147)Phone: (405) 745-2715Fax: (405) 745-4071

Texas6441 I.H. 37Corpus Christi, Texas 78409Phone: (361) 289-1455Fax: (361) 289-6251

1600 Pacific Place, Suite 1575Dallas, Texas 75201Phone: (214) 855-7823Fax: (214) 855-0033

13013 Northwest FreewayHouston, Texas 77040(P.O. Box 1212, Houston, TX 77251-1212)Phone: (713) 939-2211Fax: (713) 939-2620

6650 Bingle RoadHouston, Texas 77092(P.O. Box 1212, Houston, TX 77251-1212)Phone: (713) 683-4600Fax: (713) 683-4729

6750 Bingle RoadHouston, Texas 77092(P.O. Box 1212, Houston, TX 77251-1212)Phone: (713) 369-4100Fax: (713) 369-4128

9220 Taub RoadHouston, Texas 77064(P.O. Box 1212, Houston, TX 77251-1212)Tel: (281) 897-8500Fax: (281) 897-8789

10810 NW FreewayHouston, TX 77092(P.O. Box 1212, Houston, TX 77251-1212)Phone: 713-354-1200Fax: 713-354-1255

29501 Katy FreewayKaty, Texas 77494Phone: (281) 391-4600Fax: (281) 391-4640

Highway 90 @ FM 1909Liberty, Texas 77575(P.O. Box 10286, Liberty, TX 77575)Phone: (936) 336-8811Fax: (936) 336-2822

LOCATIONS

2705 E. Marshall Ave.Longview, Texas 75602(P.O. Box 1311, Longview, TX 75606)Phone: (903) 236-4884Fax: (903) 234-0336

306 W. Wall, Suite 1310Midland, Texas 79702Phone: (915) 682-4688Fax: (915) 682-4692

270 S. GrandviewOdessa, Texas 79761Phone: (915) 337-5475Fax: (915) 337-3001

Utah1442 E. Highway 40Vernal, Utah 84078(P.O. Box 492, Vernal, UT 84078)Phone: (435) 781-0434Fax: (435) 789-5656

Wyoming7048 Zero RoadCasper, Wyoming 82604(P.O. Box 2229, Casper, WY 82644)Phone: (307) 472-0222Fax: (307) 265-1318

102 Foothill Blvd.Rock Springs, Wyoming 82901Phone: (307) 382-3134Fax: (307) 382-3190

InternationalALGERIAZone IndustrielleIntersection rue Desserte #10Hassi Messaoud, AlgeriaTel: 213-9-73-91Fax: 213-9-73-74-27

ANGOLARua Major Kanhanguio No. 90Luanda Republic of AngolaPhone: 244-2-33-13-19Fax: 244-2-39-04-36

ARGENTINAMaipu 971, Piso 1 DTO “D”1006 Buenos Aires, ArgentinaPhone: 54-11-4-314-5520Fax: 54-11-4-311-2838

Av. Antartida Argentina 27112800 Zarate, ArgentinaPhone: 54-3487-422297Fax: 54-3487-423404

AUSTRALIALot 1702 McKinnon RoadBerrimah Northern Territory0828 DarwinPhone: 61-8-8931-2034Fax: 61-8-8931-2036

Lot 1 Ballarate Road Deer Park VicSt. Albans 3021Victoria, Australia(P.O. Box 789)Phone: 61-3-9361-4444Fax: 61-3-9361-4400

45-47 Colin StreetWest Perth, 6005Western Australia(P.O. Box 94, West Perth 6872)Phone: 61-08-9226-1444Fax: 61-08-9226-1555

BAKU37 Boyuk Gala StreetOld CityBaku 370004AzerbaijonPhone: 994-12-974606Fax: 994-12-974616

BRAZILRod Amaral Peiscoto, KM 164,5ImboassicaMaCae, Rio De Janeiro, BrazilCEP 27920-340Phone: 55-24-773-6331Fax: 55-24-773-6322

Av. Rio Branco, 181-Sala 801Rio de Janeiro – RJ20040 - 007 BrazilTel: 55-21-533-4032Fax: 55-21-524-5051

Avendia Paulista, 2.421-JardinsSao Paulo - S.P. - BrazilCEP 01311-300Phone: 55-11-3066-3600Fax: 55-11-3064-6228

Av. Arcenio Riemma1451 - Bairro do UnaCEP 120300-000Taubate - Sao Paulo BrazilPhone: 55-12-210-1000Fax: 55-12-218-2319

BRUNEILot 4007, Kawasan G22Simpang 17Seria, Brunei Darussalam(P.O. Box 177, Kuala Belait 6001)Phone: 673-3-222-613Fax: 673-3-224-284

CANADA420 Aquaduct DriveBrooks, Alberta T1R 1C4(Box 1501)Phone: 403-793-2700Fax: 403-793-2200

Texas (continued)

LOCATIONS

855 – 42nd Avenue SEBuilding BCalgary, Alberta T2P 2X6Phone: 403-261-2800Fax: 403-262-5181

5003 93rd StreetEdmonton, Alberta T6E 5S9Phone: 780-434-3476Fax: 780-437-7397

259A Tundra RoadFort St. John, British Columbia V1J 4H6(P.O. Box 6075)Phone: 250-785-2700Fax: 250-785-0700

4904 – 48th AvenueFort Nelson, British Columbia, V0C1R0Phone: 250-774-7394Fax: 250-774-7392

11302 – 89th AvenueGrand Prairie, Alberta T8V 5V8Phone: 780-539-2333Fax: 780-532-0770

67 Atlantic StreetDarmouth, Nova Scotia B2Y 4P4Phone: 902-461-4444Fax: 902-461-0493

#9, 4830 – 78th StreetRed Deer, Alberta T4P 2B3Phone: 780-342-2700Fax: 780-340-0700

CHILEBalfer LTDAZona FrancaP. O. Box 117-DPunta Arenas, ChilePhone: 56-61-213931Fax: 56-61-214379

CONGO45 Rue Louis Blanc92400 CourbevoieFrance(92038 Paris-La-Defense Cedex Mail)Phone: 242-945563Fax: 242-940283

EGYPTVilla el BarakaNo. 8 Road 279New MaadiCairo, Egypt A.R.EPhone: 202-516-4463Fax: 202-516-4789

FRANCEPlaine Saint-Pierre,34535 Beziers Cedex FrancePhone: 33-467-111500Fax: 33-467-111600

15 Avenue du General de Gaulle64000 Pau FrancePhone: 33-559-807640Fax: 33-559-807649

45 Rue Louis Blanc92400 Courbevoie, France(92038 Paris-La-Defense Cedex Mail)Phone: 33-1471-76059Fax: 33-1471-76099

GABONB. P. No. 869Port GentilRepublique GabonaisePhone: 241-553-026Fax: 241-555-897

GERMANYLueckenweg 129227 Celle, Germany(P.O. Box 3225)Phone: 49-5141-8060Fax: 49-5141-806333

INDONESIAc/o P. T. ImecoJalan Ampera Raya No. 9 & 10Cilandak TimurJakarta #12550, IndonesiaPhone: 62-21-780-4125Fax: 62-21-782-2428

PT Kartic Yasa SaranaJL Tenggiri Kav 21Batu AmparBatam, IndonesiaPhone: 778-412-285Fax: 778-412-284

IRELANDAghafad, LongfordRepublic of IrelandPhone: 353-43-50600Fax: 353-43-41560

KAZAKHSTAN80 Maresyer StreetBuilding 2, Apt 25, 41KazakhstanPhone: 7-3132-540-615Fax: 7-3132-542-519

MALAYSIA2MC, Asian Supply BaseRanca Ranca Industrial EstateLubuan Federal TerritoryMalaysiaPhone: 60-87-413914Fax: 60-87-415921

Lot 1431Piasall Jaya Industrial Estate98000 Miri SarawakEast MalaysiaPhone: 60-85-657335Fax: 60-85-656335

LOCATIONS

Lot 58, Jalan Utas 15/7,Kawasan PerusahaanSection 15, 40200 Shah AlamSelangor, Malaysia(P.O. Box 7170, 40707 Shah Alam)Phone: 60-3-5510-8850Fax: 60-3-5510-4772

Warehouse 5, Door 7AKemaman Supply Base24007 KemamanTerengganu, MalaysiaPhone: 60-9-863-1145Fax: 60-9-863-1410

MEXICOCalle 37 No. 147-ACol. Hector Perez Martinez24100, C.D. Del Carmen CampMexicoPhone: 52-938-27924Fax: 52-938-27924

Avendia Homero 1804, Suite 403Col. Chapultepec Morales11510 Mexico D.F., MexicoPhone: 52-5-5800296Fax: 52-5-3958869

Av. Acacias Esq, Av. Ciruelos S/NCd. Ind. Bruno PagliaiVeracruz, VerMexico, C.P. 91697(P.O. Box MEB-MX17-390)Phone: 52-29-891700Fax: 52-29-891701

Av. Paseo Tabasco No. 417Col. MunicipalVillahermosa, TabascoMexico, C.P. 86090Phone: 52-93-141755Fax: 52-93-141755

Carretera a Monterey, KM 104Reynosa, TamaulipasMexicoPhone: 52-89-297410Fax: 52-89-247420

NEW ZEALANDP. O. Box 672Papakura, AucklandNew ZealandPhone: 64-9-299-8103Fax: 64-9-299-8103

NIGERIA18B Thompson AvenueIkoyi, Lagos, NigeriaPhone: 2341-269-4003Fax: 2341-269-4003

Plot 45 Trans Amadi Ind. LayoutP.M.B. 995Port Harcourt, NigeriaPhone: 234-84-236761Fax: 234-84-238742

Ogunu RoadP.M.B. 1066Warri, NigeriaPhone: 871-53-230-512 or 473Fax: 871-53-230-512

THE NETHERLANDSSweelinckplein 112517GKThe Hague, The NetherlandsPhone: 31-70-365-7904Fax: 31-70-364-5941

Produktieweg 149601 MAHoogezand, The Netherlands(P. O. Box 121, 9600 AC)Phone: 31-598-361900Fax: 31-598-396298

NORWAYP. O. Box 665346 AgotnesBergen, NorwayPhone: 47-56-322811Fax: 47-56-334593

Mekjarvik 14070 RandabergStavanger, NorwayPhone: 47-51-415000Fax: 47-51-418160

OMANRoad 15Rusayl Industrial EstateSultanate of Oman(P.O. Box 130, Postal Code 124)Phone: 968-629156Fax: 968-626923

GBM Building Level AAl Wallaj Street QurumMuscat, Sultanate of Oman(P.O. Box 985, Postal Code 112)Phone: 968-562158Fax: 968-562178

PAKISTANNo 12, Street 12F-7/2(P. O. Box 1416)Islamabad PakistanPhone: 92-51-274952Fax: 92-51-824141

QATARc/o Al Ahed Trading and Const. Co. Ltd.P. O. Box 3266Doha, QatarPhone: 974-410797 or 835Fax: 974-411582

LOCATIONS

RUSSIAPer. Sadovskikh, 4Apt. 12Moscow 103001, RussiaPhone: 7-502-2213422Fax: 7-502-2213010

SAUDI ARABIAAl Khobar 31952Saudi Arabia(P. O. Box 31684)Phone: 966-3-893-3333, ext 399Fax: 966-3-894-6426SCOTLANDBadentoy AvenuePortlethenAberdeenshire, Scotland AB1 4YBPhone: 44-1224-282000Fax: 44-1224-781800

ICS House Badentoy ParkPortlethenAberdeenshire, Scotland AB1 4YAPhone: 44-1224-783500Fax: 44-1224-783355

SINGAPORENo.2 Gul CircleJurong Industrial EstateSingapore 629560Phone: 65-861-3355Fax: 65-861-6197

THAILANDC-O Level 23, CP Tower313 Silom Road, BangrukBangkok 01500ThailandPhone: 66-2-231-8320Fax: 66-2-231-8321

UNITED ARAB EMIRATESc/o Sigma Enterprises BldgMussafah Area, 7th StreetP.O. Box 3555Abu Dhabi, U.A.EPhone: 971-2-551-1313Fax: 971-2-551-0441

P.O. Box 43966Abu Dhabi, U.A.E.Phone: 971-2-723648Fax: 971-2-782293

UNITED KINGDOMUnits 1 & 2 Boundary RoadHarfrey’s Industrial EstateGreat Yarmouth, NorfolkEngland NR31 OLYTel: 44-1493-440438Fax: 44-1493-655405

Unit 11, Brinell WayHarfrey’s Industrial EstateGreat Yarmouth, NorfolkEngland NR31 OLUPhone: 44-1493-650675Fax: 44-1493-650676

Queen StreetStourtonLeeds, West YorkshireEngland LS10 1SBPhone: 44-113-2701144Fax: 44-113-2764751

5 Mondial WayHarlingtonHayes UB3 5ARLondon, EnglandPhone: 44-280-9901800Fax: 44-181-9901888

VENEZUELACarretera A. Perija KM 7 1/2Calle 166, No. 49 F-180Barrio el SilencioMaracaibo, Venezuela 4001-APhone: 58-261-7312-960Fax: 58-261-7310-638

Zona Industrial de MaturinManzana 49, Calle 2Detras de VicsonMaturin, Monagas, VenezuelaPhone: 58-291-6526-412Fax: 58-291-6516-946

Av. Venezuela, 3er Piso, Oficina 316Torre AmericaBello MonteCaracas, VenezuelaPhone: 58-212-707-6403 or 6404Fax: 58-212-762-1379

Urb. Canaima, Calle F, Casa 29-FPunta de Mata, Monagas, VenezuelaPhone: 58-292-2370-014Fax: 58-292-3370-429

Av. Intercimunal, Carrera HAL. Lado dek Rio TammareSector el PradoTia Juana, edo Zulia, VenezuelaPhone: 58-65-310-521Fax: 58-65-310-832

Western HemisphereCameronPO Box 1212Houston, Texas 77251-1212Tel 713 939 2211Fax 713 939 2620

Cameron WIllisTel: 713 354 1200Fax: 713 354 1291

Cameron ControlsTel: 713 683 4600Fax: 713 683 4729

Cameron DrillingTel: 713 939 2211Fax: 713 939 2620

CAMSERVTel: 713 939 2211Fax: 713 939 2620

Eastern HemisphereCooper Cameron (U.K.) Ltd.5 Mondial WayHarlingtonHayes, UB3 5AREnglandTel 44 208 990 1800Fax 44 208 990 1888

Asia Pacific/Middle EastCooper Cameron (Singapore) Pte, Ltd.Subsidiary of Cooper Cameron Corporation2 Gul Circle, Jurong Industrial EstSingapore 629560Republic of SingaporeTel 65 861 3355Fax 65 861 6197

Visit our website at: www.camerondiv.com

© Cooper Cameron Corporation, Cameron Division, Printed in USA, 7/01, NP/3M, WR10383 / TC1253

cameron api

Documents