by song chen - university of floridaufdcimages.uflib.ufl.edu/uf/e0/04/48/92/00001/chen_s.pdf · by...
TRANSCRIPT
![Page 1: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/1.jpg)
1
ELECTRONIC PROCESSES IN POLYMER SOLAR CELLS
By
SONG CHEN
A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL OF THE UNIVERSITY OF FLORIDA IN PARTIAL FULFILLMENT
OF THE REQUIREMENTS FOR THE DEGREE OF DOCTOR OF PHILOSOPHY
UNIVERSITY OF FLORIDA
2012
![Page 2: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/2.jpg)
2
© 2012 Song Chen
![Page 3: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/3.jpg)
3
To my mom
![Page 4: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/4.jpg)
4
ACKNOWLEDGMENTS
First, I would appreciate my supervisor—Prof. Franky So who has been showing
tremendous confidence and support to my research. Prof. So’s great passion and
professional working attitude inspired and will always influence my future career. I
should say thank you to Prof. John Reynolds who is now moved to Georgia Tech. I’ve
learned and benefited a lot ever since the beginning of “SoRey” joint group. As a
student with pure physics background, I appreciate this great experience to collaborate
with so many talented chemists. I need to acknowledge my supervisory committee—
Prof. Jiangeng Xue, Prof. Andrew Rinzler, Prof. David Norton, and Prof. Jacob J. Jones.
I owe my great PhD experience to many colleagues as well as collaborators. I
would like to thank Dr. Jaewon Lee and Dr. Neetu Chopra for their supervisory during
my first year of PhD, Dr. Kaushik Roy Choudhury for introducing me to the area of
device physics, Dr. Lei Qian and Dr. Chi-Hung Cheung for our collaboration and
friendship, Dr. Jegadasan Subbiah for your mentoring of thin film processing, Dr. Chad
Amb, who was in Prof. Reynolds’ group, for synthesizing the best photovoltaic polymer
in the world, Cephas Small for our shared effort for that record power conversion
efficiency, Dr. Sai-Wing Tsang for your guidance and our successful collaboration in
2012. That is a period I have my best ever research experience. To all the rest of my
solar cell group members—Tzung-han Lai, Erik Klump, Sujin Beak, Iordania
Constantinou, and Michael Hartel, I am happy that you can tolerate my “casual”
leadership in the past few months. Thanks to the rest members of our huge OEMD lab,
it is so nice to communicate with people from different cultural backgrounds. For the
research projects I have worked on, I acknowledge the financial support from Office of
![Page 5: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/5.jpg)
5
Naval Research (ONR), Department of Energy (DOE), Air Force Office of Scientific
Research, and Florida Energy Systems Consortium (FESC).
I also thanks to my classmates— Weiran Cao, Rui Qing, Dr. Yixing Yang, Dr. Ying
Zheng and Renjia Zhou. We had a lot of fun during the lunch breaks and weekend
basketball time.
At last but not the least, I would like to express my deepest gratitude to my
parents. Without their support, I wouldn’t have been so determined during my pursuit of
this degree in the past four years.
![Page 6: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/6.jpg)
6
TABLE OF CONTENTS page
ACKNOWLEDGMENTS .................................................................................................. 4
LIST OF TABLES ............................................................................................................ 9
LIST OF FIGURES ........................................................................................................ 10
LIST OF ABBREVIATIONS ........................................................................................... 14
ABSTRACT ................................................................................................................... 17
CHAPTER
1 FUNDAMENTALS OF POLYMER SOLAR CELLS ................................................. 19
1.1 Photo-Induced Charge Transfer ....................................................................... 19
1.1.1 Marcus Theory ........................................................................................ 19
1.1.2 From Excitons to Free Carriers ............................................................... 21
1.2 Carrier Transport and Recombination ............................................................... 26
1.2.1 Localization ............................................................................................. 26
1.2.2 Hopping Mechanism ................................................................................ 27
1.2.3 J-V Characteristics—Trap Limited and Bulk Limited Transport ............... 28
1.2.4 Bimolecular Recombination ..................................................................... 30
1.3 Device Architectures ......................................................................................... 32
1.3.1 Bulk-Heterojunction (BHJ) ....................................................................... 32
1.3.2 Electrode Contact .................................................................................... 33
2 CHARACTERIZING POLYMER SOLAR CELLS .................................................... 34
2.1 Standard Spectra .............................................................................................. 34
2.2 Transport Measurements .................................................................................. 35
2.2.1 Space Charge Limited Current ................................................................ 35
2.2.2 Carrier Extraction with Linearly Increasing Voltage (CELIV) ................... 37
2.3. Biomolecular Recombination Measurements ................................................... 38
2.3.1 Photo-Carrier Extraction with Linearly Increasing Voltage (Ph-CELIV) ... 38
2.3.2 Transient Photo-Voltage (TPV) ............................................................... 39
2.4 Probing the Energy Alignment .......................................................................... 40
2.4.1 Cyclic Voltammetry (CV) ......................................................................... 40
2.4.2 Electro-Absorption (EA) Spectroscopy .................................................... 40
3 SPACE CHARGE LIMITED PHOTOCURRENT ..................................................... 44
3.1 Abstract ............................................................................................................. 44
3.2 Introduction ....................................................................................................... 44
3.3 Experimental ..................................................................................................... 50
![Page 7: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/7.jpg)
7
3.4 Results and Discussions ................................................................................... 51
3.4.1 Carrier Mobility Measurements ................................................................ 51
3.4.2 Photocurrent Jph(V) Analysis ................................................................... 55
3.4.3 Photocurrent Jph(G) Analysis ................................................................... 58
3.4.4 Charge-Balanced Systems ...................................................................... 60
3.5 Summary .......................................................................................................... 63
4 BIMOLECULAR RECOMBINATION LIMITED PHOTOCURRENT ......................... 65
4.1 Abstract ............................................................................................................. 65
4.2 Introduction ....................................................................................................... 65
4.3 Experimental ..................................................................................................... 68
4.4 Results and Discussions ................................................................................... 69
4.4.1 The Balance of Charge Extraction ........................................................... 69
4.4.2 Recombination at the Maximum Power Condition ................................... 72
4.4.3 Recombination at the Open Circuit Condition .......................................... 76
4.4.4 Energetic Disorder ................................................................................... 80
4.5 Summary .......................................................................................................... 84
5 INTERFACIAL ENGINEERING .............................................................................. 86
5.1 Abstract ............................................................................................................. 86
5.2 Introduction ....................................................................................................... 86
5.2.1 Zinc Oxide (ZnO) ..................................................................................... 89
5.2.2 Molybdenum Oxide (MoO3) ..................................................................... 91
5.2.3 The Inverted Device Geometry ................................................................ 93
5.3 Experimental ..................................................................................................... 95
5.4 Results and Discussions ................................................................................... 96
5.4.1 Inverted Polymer Solar Cells ................................................................... 96
5.4.2 Inverted Cells with Reduced Interface Recombination .......................... 100
5.4.3 Device Stability ...................................................................................... 109
5.5 Summary ........................................................................................................ 110
6 OPEN CIRCUIT VOLTAGE LOSS ........................................................................ 111
6.1 Abstract ........................................................................................................... 111
6.2 Introduction ..................................................................................................... 112
6.2.1 Effective Bandgap ................................................................................. 112
6.2.2 Recombination and Excitonic Loss ........................................................ 116
6.3 Experimental ................................................................................................... 119
6.4 Results and Discussions ................................................................................. 120
6.4.1 Subgap Signals in EA Spectra .............................................................. 120
6.4.2 Exploring the Excitonic Loss of Open Circuit Voltages .......................... 129
6.5 Summary ........................................................................................................ 136
7 CONCLUSIONS AND FUTURE WORK ............................................................... 138
7.1 Conclusions .................................................................................................... 138
![Page 8: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/8.jpg)
8
7.2 Future Work .................................................................................................... 141
7.2.1 The Reduction of Energetic Disorder..................................................... 141
7.2.2 Exciton Migration in Donor-Acceptor Polymers ..................................... 141
APPENDIX
A LIST OF MOLECULE STRUCTURES .................................................................. 145
B LIST OF PUBLICATIONS AND CONFERENCE PRESENTATIONS ................... 147
Peer Reviewed Publications ................................................................................. 147
Oral Presentations in Conferences ....................................................................... 149
Poster Presentations in Conferences.................................................................... 151
LIST OF REFERENCES ............................................................................................. 152
BIOGRAPHICAL SKETCH .......................................................................................... 165
![Page 9: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/9.jpg)
9
LIST OF TABLES
Table page 3-1 Calculated maximum generation rate of electron-hole pairs and their
separation efficiency under short circuit condition for blends of PG1, PG2, PG3 with PC61BM. .............................................................................................. 57
4-1 Hole and electron mobility in PDTS-BTD:PC71BM and P3HT:PC71BM. .............. 71
5-1 Summary of device performance ...................................................................... 105
6-1 Summary of carrier concentrations and recombination induced VOC loss ......... 135
![Page 10: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/10.jpg)
10
LIST OF FIGURES
Figure page 1-1 Many-dimensional potential profile of reactants (R) and products (P) with
respectively with their surrounding miedia.. ........................................................ 19
1-2 (color) The illustration of the evolution from an exciton. ..................................... 22
1-3 (color) The free energy diagram revealing the process from exciton generation to, charge transfer and charge separation states.. ........................... 23
2-1 Standard solar spectra ....................................................................................... 35
2-2 The J-V curves of two polymer:fullerene systems.. ............................................ 36
2-3 A sketch showing the physical process of (Ph-)CELIV measurement. ............... 37
2-4 The sketch of TPV setup and an example showing the TPV signals of a P3HT:PCBM solar cell. ....................................................................................... 39
2-5 Energy levels contributing to the Stark effect in a two-level dominant system .... 41
3-1 The sketch of space charge accumulation in a system with imbalanced electron-hole mobility. ......................................................................................... 48
3-2 The structures of the polymers to be discussed. ................................................ 50
3-3 Current densities as a function of effective electric field for different hole-only BHJ films with optimized donor-acceptor compositions for photovoltaic performance. ...................................................................................................... 53
3-4 Current densities as a function of effective electric field for different electron-only BHJ films with optimized donor-acceptor compositions for photovoltaic performance. ...................................................................................................... 54
3-5 Experimental photocurrent plotted as a function of effective bias. ...................... 56
3-6 Normalized photocurrent plotted as a function of effective bias.......................... 57
3-7 Photocurrent in PG3: PC60BM solar cells as a function of effective applied voltage parametric in incident light intensity. ...................................................... 59
3-8 Photocurrent as a function of incident light intensity at three operating voltages, low, intermediate and saturation.. ....................................................... 60
3-9 Saturation voltage as a function of incident light power. ..................................... 60
![Page 11: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/11.jpg)
11
3-10 Photocurrent as a function of effective applied voltage for different incident light intensities for PDTS-BTD: PC71BM. ............................................................ 61
3-11 Photocurrent as a function of effective applied voltage for different incident light intensities for PV1000 ink solar cells. .......................................................... 62
3-12 Short-circuit photocurrent as a function of incident light intensity for the two photovoltaic systems shown in Figure 2-10 and 2-11.. ....................................... 63
4-1 (color) J-V characteristics of a P3HT:PC71BM cell and a PDTS-BTD:PC71BM cell measured under A.M. 1.5G illumination. ...................................................... 66
4-2 (color) J-V characteristics of a hole-only and an electron-only device of PDTS-BTD:PC71BM.. .......................................................................................... 70
4-3 (color) Jph plotted as a function of effective voltage. ........................................... 72
4-4 (color) Photo-CELIV curves of PDTS-BTD:PC71BM as a function of delay time ..................................................................................................................... 73
4-5 (color) The recombination dynamics extracted from the photo-CELIV results .... 74
4-6 (color) The recombination dynamics extracted from transient photo-voltage measurements with different incident light intensity ............................................ 77
4-7 (color) The carrier lifetimes of P3HT:PC71BM and PDTS-BTD:PC71BM systems. ............................................................................................................. 78
4-8 (color) The recombination coefficients of P3HT:PC71BM and PDTS-BTD:PC71BM systems. ....................................................................................... 79
4-9 (color) CELIV mobility as a function of delay time. ............................................. 83
4-10 (color) Zero field mobilities plotted as a function of temperature. ....................... 83
5-1 (color) Energy diagrams of state-of-art photovoltaic polymers and transition metal oxides that are commonly used for interfacial engineering ....................... 89
5-2 (color) Transmission electron microscopic images of ZnO colloidal nanoparticles with a scale of 5 nm (left) and 50 nm (right). ................................ 90
5-3 (color) X-ray diffraction of ZnO nanoparticles. The pattern reveals the wurtzite structure. ............................................................................................... 91
5-4 (color) The illustration of normal (left) and inverted (right) structure for polymer solar cells. ............................................................................................. 94
5-5 The monomer structure of PDTG-TPD and PDTS-TPD. .................................... 97
![Page 12: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/12.jpg)
12
5-6 (color) The absorption of PDTG-TPD and PDTS-TPD measured in solution phase. ................................................................................................................. 98
5-7 (color) The J-V characteristics measured under A.M. 1.5G condition. ................ 99
5-8 (color) The external quantum efficiency (EQE) for the same devices in Figure 5-7. ................................................................................................................... 100
5-9 (color) The photoluminescence of ZnO nanoparticles films with and without UVO treatment. ................................................................................................. 102
5-10 (color) The J-V (left, A.M. 1.5G) and EQE spectrum of inverted PDTG-TPD:PC71BM cells. ........................................................................................... 104
5-11 (color) The J-V (left, A.M. 1.5G) and EQE spectrum of inverted PDTS-TPD:PC71BM cells. ........................................................................................... 104
5-12 (color) The certification from Newport PV lab. The device was made by Song Chen. ................................................................................................................ 105
5-13 (color) The carrier recombination measured by transient photocurrent (small signal mode). .................................................................................................... 107
5-14 (color) The DC dependent electroabsorption 1st harmonic signals. .................. 108
5-15 The J-V of a PDTG-TPD:PC71BM cell made in June 6th, 2011 and re-measured in August 29th, 2012. ........................................................................ 110
6-1 (color) The normalized electroabsorption spectra ............................................. 122
6-2 (color) Electroabsorption signal. ....................................................................... 123
6-3 (color) Illustration of CMEAS mechanism. ........................................................ 124
6-4 (color) CMEAS results of pristine PCDTBT.. .................................................... 125
6-5 (color) The normalized electroabsorption spectra of pristine PCDTBT under reverse (black) and positive (red) DC voltage biases VDC. ............................... 126
6-6 (color) Open circuit voltages plotted as a function of effective bandgap measured by CV, the data is from reference. The dashed line is an indicator of Eq. 6-1. ......................................................................................................... 130
6-7 (color) CMEAS from a pristine PDTG-TPD sample, a PDTG-TPD:PC71BM blend and a linear combination of pristine PDTG-TPD and PC71BM signals. All the spectra are re-scaled using the same field condition 105Vcm-1. ............ 131
6-8 (color) Sub-bandgap CMEAS signals of a series of photovoltaic polymers. The onset of the sub-bandgap feature is defined as the effective bandgap. .... 132
![Page 13: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/13.jpg)
13
6-9 (color) VOCs plotted as a function of measured Eeffs measured by CMEAS ...... 133
6-10 (color) plotted as a function of the inverse of dielectric constants. The dashed line is an indicator of eye. ............................................ 134
6-11 (color) ECS (the VOC loss during the charge separation process) plotted as a function of the inverse of dielectric constants. .................................................. 136
7-1 (color) The absorption spectra of PDTG-TPD, PDTG-BTD and P(il-DTG). The measurements were carried out with solid state polymer films on quartz substrates. ........................................................................................................ 144
7-2 (color) The fitting of absorption spectra and Huang-Rhys factor extracted by Gaussian fitting. ................................................................................................ 144
![Page 14: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/14.jpg)
14
LIST OF ABBREVIATIONS
AM Air mass
BHJ Bulk heterojunction
CDM Correlated disorder model
CELIV Carrier extraction with linearly increasing voltage
CMEAS Charger modulated electroabsorption spectroscopy
CS Charge separation
CT Charger transfer
CTC Charge transfer complex
CV Cyclic voltammetry
D-A Donor-acceptor
DOS Density of states
EA Electroabsorption
EQE External quantum efficiency
ETL Electron transporting layer
FCWD Frank-Condon weighted density of states factor
FF Fill factor
GDM Gaussian disorder model
HOMO Highest occupied molecular orbital
IC60BA Indene-C60 bisadduct
IC70BA Indene-C70 bisadduct
IQE Internal quantum efficiency
ITO Indium tin oxide
JPH Photo-current density
JSC Short-circuit current density
![Page 15: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/15.jpg)
15
LUMO Lowest unoccupied molecular orbital
MDMO-PPV Poly(2-methoxy-5-(3’-7’-dimethyloctyloxy)-1,4-phenylenevinylene)
MoO2 Molybdenum(IV) oxide
MoO3 Molybdenum(VI) oxide
NiO Nickel(II) oxide
OPV Organic photovoltaic
P3HT Poly-(3-hexyl)thiophene
PC61BM [6,6]-phenyl C61 butyric acid methyl-ester
PC71BM [6,6]-phenyl C71 butyric acid methyl-ester
PCDTBT Poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl]
PCE Power conversion efficiency
PDTG-TPD Poly[2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]germole)-alt-1,3-(5-octyl-4H-thieno[3,4-c]pyrrole-4,6-dione)]
PDTG-BTD Poly[2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]germole)-alt-4,7(2,1,3-benzothiadiazole)]
PDTS-BTD Poly[2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]silole)-alt-4,7(2,1,3-benzothiadiazole)]
PDTS-TPD Poly[2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]silole)-alt-1,3-(5-octyl-4H-thieno[3,4-c]pyrrole-4,6-dione)]
PEDOT:PSS Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)
PH-CELIV Photo-induced carrier extraction with linearly increasing voltage
PSC Polymer solar cell
PTB7 Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]
P(il-DTG) Poly[6,6'-((E)-1,1'-bis(2-ethylhexyl)-[3,3'-biindolinylidene]-2,2'-dione)-alt-2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]germole)]
P(il-DTS) Poly[6,6'-((E)-1,1'-bis(2-ethylhexyl)-[3,3'-biindolinylidene]-2,2'-dione)-alt-2,6-(4,4'-bis(2-ethylhexyl)dithieno[3,2-b:2',3'-d]silole)]
![Page 16: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/16.jpg)
16
REDOX Reduction-oxidization
SCLC Space charge limited current
TCLC Trapped charge limited current
TCO Transparent conducting oxide
TEM Transmission electron microscopy
TIO2 Titanium(IV) oxide
TPA Transient photocurrent
TPV Transient photovoltage
UVO Ultra-violet ozone
V2O5 Vanadium(V) oxide
VOC Open-circuit voltage
WF Work function
WO3 Tungsten(VI) oxide
ZnO Zinc oxide
![Page 17: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/17.jpg)
17
Abstract of Dissertation Presented to the Graduate School of the University of Florida in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy
ELECTRONIC PROCESSES IN POLYMER SOLAR CELLS
By
Song Chen
December 2012
Chair: Franky So Major: Materials Science and Engineering
Polymer solar cells (PSCs) with power conversion efficiencies (PCEs) exceeding
10% have been demonstrated in laboratories due to the development of novel materials,
film processing techniques, and device architectures. However, some critical physical
properties of the polymer:fullerene bulk heterojunction (BHJ), such as the charge
transfer process, energy alignment, carrier recombination and transport still remain to
be further studied.
First, we studied the impact of charge transport on the solar cell performance.
Space charge limited photocurrent, which is directly caused by imbalanced electron-
hole mobility, severely reduces the photocurrent extraction efficiency. This model
explains the efficiency loss mechanism in certain polymer:fullerene BHJ cells, while the
photocurrent loss in the systems with balanced charge transport needs to be studied
using detailed recombination measurements. Next, by measuring the carrier lifetime, we
concluded that bimolecular recombination significantly limits the fill factors and open
circuit voltages of polymer solar cells, especially in the systems with large energetic
disorder.
![Page 18: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/18.jpg)
18
Following the studies of bulk recombination, we also investigated the
recombination at the interface between absorber and electrode. The intrinsic point
defects in the transition-metal-oxide interlayer can reduce the local carrier lifetime and
thus the short circuit current of polymer solar cell. Upon the defects reduction using UV-
ozone treatment, we are able to improve the performance of our inverted cell, resulting
in a record efficiency of 8.1%.
In the final section, we first demonstrate a novel method to probe the energy
alignment in the polymer:fullerene BHJ. Charge modulated electroabsoprtion
spectroscopy (CMEAS) directly determines the effective bandgap in a solid state BHJ
film, which outplays the previous electro-chemical methods that can only be applied to
individual pristine materials. Combining the study of carrier recombination with the result
of CMEAS, we successfully demonstrate that the loss of open circuit voltages in
excitonic cells strongly depends on the dielectric constant of the BHJ system.
![Page 19: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/19.jpg)
19
CHAPTER 1 FUNDAMENTALS OF POLYMER SOLAR CELLS
1.1 Photo-Induced Charge Transfer
As an emerging thin film solar technology, the PCEs of OPV successfully
surpassed the 10.0% milestone recently.1, 2 Such achievement is realized by the great
development of photo-active materials, device architecture and the understanding of
device physics. To understand the origin of the photovoltaic effect in organic solar cells
and then a special case—polymer:fullerene BHJ solar cells, we need to first discuss the
process of charge generation—photo-induced charge transfer.3 With this discussion, we
can further understand the rationale of device architecture and other pieces in the
framework of device physics.
1.1.1 Marcus Theory
The theory of bimolecular electron-transfer reaction in solution was studied since
1950’s.4-6 A detailed review was presented by Marcus in 1984.7
Figure 1-1. Many-dimensional potential profile of reactants (R) and products (P) with respectively with their surrounding miedia. A and C respectively marks the nuclear coordinates under equilibrium for R and P. B denotes the intersection of the two potential energy surfaces. The dotted line indicates the energy level splitting due to the energy states interaction in R.
![Page 20: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/20.jpg)
20
A classic way to describe the electron-transfer rate is presented as following. The
vibrations within the reactants were treated as harmonic oscillators. The fluctuation of
nuclei position affects the potential energy of the outer-sphere, there’s certain possibility
that the outer-sphere electron has the same energy as an outer-sphere unoccupied
state owned by an adjacent reactant. Such possibility is referred as the probability of
reaching the many-dimensional intersection region on the coordinate of potential energy.
A term describing the possibility of crossing the intersection region should be included.
Thus, the transition rate is given by:
(1-1)
where or is the transmission coefficient for electron transfer through the
intersection region, has the dimension of collision frequency, is the mean
separation distance in the transition state of the reaction, is the free energy of
activation that is related to —the reorganization parameter.
With quantum consideration, under the approximation of weak electronic coupling
( )8-10, the first order transition rate is given by
(1-2)
where is the matrix elements describing the electronic coupling between a
electronic state of reactant and that of a product. is the ‘Franck-Condon’ term
which is a sum of products of overlap integrals of the vibrational and solvational
wavefunctions of the reactants with those of the products. When all the coordinates
(solvent and inner-shell) are treated as oscillators in a quantum mechanical way, Eq.1-2
is written as:
(1-3)
![Page 21: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/21.jpg)
21
where and label the quantum states of reactants and products, is the ‘Franck-
Cordon’ term of the given quantum states. is the Boltzman probability to find the
system in state . Such a treatment is proved to be inappropriate for the reaction
experiences a significant change of entropy. However, if the quantum mechanics
treatment is only applied to the inner-shell coordinates, while the solvent is treated
classically, Eq. 1-3 is rewritten as Eq. 1-4 and its high temperature extreme as Eq. 1-5
which is the version widely used in numerical analysis.
(1-4)
(1-5)
From Eq. 1-1 to Eq.1-5, we can evaluate what parameters can impact the charge-
transfer in a polymer:fullerene solar cell. First, the electronic coupling is affected by the
molecular structure, the interface effective force, the BHJ morphology (the mean
spacing between reactants and products), and the dielectric constants of the polymer
and fullerene derivatives. Second, the energy of initial and final states of the transfer
process may be related to the recombination process in the disordered systems.11, 12
Third, the reorganization energy of different polymers is a topic that has not been well
studied.
1.1.2 From Excitons to Free Carriers
What does charge transfer specifically mean in polymer solar cells? Here, as
illustrated in Figure 1-2, it is specified as an effective-interface-force-assisted process in
which a photo-generated exciton in an electron donating molecule gets separated at the
donor-acceptor interface, resulting in the electron donating molecule charged with a
hole and the adjacent electron accepting molecule charged with an electron.3 Similarly,
![Page 22: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/22.jpg)
22
such a process also applies to hole-transfer. Separated electrons and holes are
generated across the donor-acceptor interface and transport under the assistance of
internal electric field. This is the origin of photovoltaic effect in a polymer:fullerene BHJ
excitonic cell.
Figure 1-2. (color) The illustration of the evolution from an exciton A) photo-generated in the donor phase to the separated electron and hole D); D denotes the donor phase and A denotes the acceptor phase; B) stands for the CT state. The solid straight line denotes the donor-acceptor (polymer-fullerene) interface.
During charge transfer, the status wherein an electron-hole pair is loosely bonded
across the donor-acceptor interface is referred as “charge transfer (CT) states” or
“charge transfer complexes (CTC)”.13 Such a process is ultrafast as transient absorption
measurements repeatedly reveal a sub-picosecond dynamics.14, 15 During this short
period of time, excitons experience all the following steps to finish transferring the
charge. First, the photo-generated exciton first relaxes to the one of the many CT
manifolds. The role of excess energy during such a process is still under debate.14, 16-18
Many reports claim that, in efficient polymer:fullerene systems, the CT exciton in the
higher manifolds (CTn), which is also called “hot” CT states, are easier to get further
![Page 23: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/23.jpg)
23
separated due to their relatively delocalized wavefunctions.15 Those excitons cannot
dissociate in such a ultrafast fashion will relax to the ground states—CT0 and then either
decay to the ground state (S0) or get enough energy to hop to higher CT manifolds to
complete the dissociation.19 The transition from CT0 to S0 belongs to geminate type of
recombination, which is in contrast with the bimolecular recombination between free
carriers. Geminate recombination is composed of a tiny fraction (EQE~10-6) of radiative
recombination20 and the rest of non-radiative type. Organic photovoltaic systems are not
good light emitters; the CT emission is extremely inefficient for polymer:fullerene
systems, which is in agreement with the discrepancy between typical polymer solar cells
performance and limit predicted by Shockley-Queisser detailed balance theory.21
Figure 1-3. (color) The free energy diagram revealing the process from exciton generation to, charge transfer and charge separation states. The recombination events are marked as dashed blue arrow; the dashed red arrow denotes the CT relaxation.
Figure 1-3 is the so-called free energy diagram showing all the above mentioned
processed from exciton generation to charge transfer. All the excitation, CT, and
recombination pathways are indicated using different arrows. It is worth to notice that,
![Page 24: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/24.jpg)
24
even at the stage named “charge separation”, the coulombic interaction still plays a role
in the energy coordinate due to the small dielectric constant and an electron-hole
separation less than 10 nm. Thus free carriers may have lower energies than some CT
manifolds.
Charge transfer cannot happen without photo-generated excitons. In fact, photo-
excitation is also a charge transfer process that happens within a polymer repeating unit.
Thus, the exciton binding energy highly depends on the charge distribution in the
excited states. Some researchers also use internal dipole moment to describe different
exciton binding energies.22 Usually, a larger dipole moment in the repeating block
corresponds to a smaller exciton binding energy and thus a smaller driving force
required for charge dissociation. Some earlier thiophene based polymers, such as
P3HT,23 have an intramolecular charge transfer in the scale of a thiophene unit.
Therefore, the center of electron and hole wavefunctions are almost overlapped, leaving
a very large exciton binding energy of 0.3 eV~0.4 eV. To separate charges from such a
large binding energy, a significant interface electric field (~106 V/cm) is required. That
leads to a widely accepted but empirical value of 0.3 eV LUMO or HOMO band offset
for a minimum requirement to finish the charge dissociation.24 However, some lately
studied donor-acceptor polymers show very efficient charge dissociation even with a
LUMO band offset less than 0.3 eV. To address the difference, we need to first show
the basics of donor-acceptor polymers.25-27 Typically, in a repeating block of such a
polymer, there’re two functional units bearing quite different electron affinities. This
polymer construction strategy allows chemists to create polymers by trying different of
donor-acceptor combinations, generating polymers with low bandgap and deep-lying
![Page 25: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/25.jpg)
25
HOMO energies which are required for the harvesting of photocurrent and
photovoltage.28-32 Due to the donor-acceptor structure, the exciton excitation is
essentially a process of electron transferring from the donor unit to the acceptor unit.
Since the two units are quite separated in the repeating block, the generation of an
exciton causes a significant change of intramolecular dipole moment.22 The binding
energy of the exciton is consequently lower than the traditional single-unit polymers.
This small binding energy is also consistent with the ultrafast charge transfer that is
mentioned in previous text.
In sum, the purpose of this section is not only to show the origin of the photovoltaic
effect, but more importantly, the difference between organic solar cells and traditional
inorganic thin film cells such as amorphous silicon and chalcogenide cells. Organic
solar cells generate charges in two different materials instead of one. As a result,
polymer solar cells have to apply the hetrojunction architecture. The driving force of
photocurrent is also more than just the equilibrium built-in voltage which is the case for
inorganic cells. Due to the different direction of carrier concentration gradient, the profile
of carrier concentration also contributes to the local fluctuation of quasi-Fermi energies,
leading to local photocurrent flow.33 The organic cells with a two-layer structure24 is very
typical in terms of the chemical potential driven photocurrent; while, in the so called BHJ
structure, the carrier concentration is almost uniformly distributed in the light absorbing
layer, leaving its gradient too small to generate an impact on the quasi-Fermi level
splitting. But, qualitatively, the photovoltaic effect of a BHJ polymer solar cell is still
driven by both the equilibrium built-in electric field and the local fluctuation of chemical
potential.
![Page 26: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/26.jpg)
26
1.2 Carrier Transport and Recombination
These two electric processes are actually very important topics in organic
electronics. They are introduced in the same section because they are quite correlated
to each other in the photovoltaic behavior. The carrier transport in the nano-scale
network is no different from the hopping conduction that people proposed for typical
disordered systems;34 the recombination is much lower than the prediction by Langevin
type mechanism,35 whereas, the it scales perfectly with mobility values which can be
tailored by measuring the mobility and recombination at different temperatures.36, 37 The
impact of transport and recombination will be discussed in Chapter 2 and Chapter 3 in
details respectively.
1.2.1 Localization
From the classic solid state physics, we know that the defects in crystal structure
induce the localization of electron wavefunction and affect the band conduction. The
loss of potential periodicity in disordered organic solids determines a different energy
level structure to those crystalline solids. Another consequence with the inclusion of
disorder is the broadening of density of states (DOS) distribution.38 In either profile of
DOS tail i.e. exponential or Gaussian, the tail states are more localized than those
states with high population. Using Anderson’s model,39 a uniform probability distribution
of disorder gives an exponential band-tail,38 which is commonly used to describe the
band-tail energies in disordered solids. Amorphous silicon and some organic materials
are good examples of using an exponential tail distribution.40 Another commonly used
DOS distribution is the Gaussian distribution which is a result of totally randomized
energy level occupation.41 These two DOS profiles are widely used in numerical or
analytical models wherein the important factors like tail width usually become fitting
![Page 27: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/27.jpg)
27
parameters. Despite of the difficulties, there are some very important models, such as
Mott transition42 and Anderson transition39, derived for the description of metal-insulator
transition.
According to the concept of Anderson transition, the weak van der Waals bonding
between organic molecules causes the narrowed electronic bandwidth which can be
easily overwhelmed by the energy level variation due to energetic disorder. As a result,
the transition from metal to insulator (Anderson transition) happens along with carrier
localization. Structural (physical) disorder43 and polarization44 are two main factors that
contribute to the energetic (diagonal) disorder and charge localization.
1.2.2 Hopping Mechanism
If the energetic disorder and charge localization is mainly determined by the
polarization due to the intramolecular structure change, or in other words, if the hopping
rate is limited by the molecular reorganization, polaron models are valid. Marcus theory
is usually applied in this scenario since it is similar to the small polaron theory. The
hopping activation energy is then in the form of Eq. 1-4 and Eq. 1-5. However,
comparing with the hopping mechanism purely based on structural disorder, the polaron
model is not very popular in the study of carrier transport.
In the model of disorder, it is easy to understand the activation energy only
appears in an endothermic process. Such a model was initiated in the topic of impurity
conduction at low concentrations. The ‘Miller-Abrahams’ rate34 is a hopping model built
for the impurity states in crystalline materials. Similarly, Ambergaokar reduced the
hopping model to an equivalent random resistance network.45 Following the correlation
of localization and mobility gap which was introduced by Anderson and developed by
Mott46, the hopping between two random sites happens if the condition is fulfilled:
![Page 28: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/28.jpg)
28
, with as the electronic energy difference between the two sites, U as
the binding energy of the localized states (trap) in the mobility gap, as a length
describing the special decay of wavefunctions centered at a localized states. Further
assuming makes Eq. 1-6 a good approximation of hopping
mechanism:45
(1-6)
denotes the transition rate from site i to site j. is a constant depending on the
electoron-phonon coupling strength. is a result of considering the hopping as a
tunneling process between two trap states. is introduced due to the
requirement to maintain symmetry of net charge flow between i and j. Such a model
provides insight to explain the temperature dependence in amorphous silicon, and
germanium.47, 48
1.2.3 J-V Characteristics—Trap Limited and Bulk Limited Transport
The correlation between the hopping mechanism and derivation of J-V
characteristics is yet clearly demonstrated. Depending on the mechanism of disorder
and localization, the transport law may vary a lot. Even in different organic materials,
contrasting temperature, electric field dependence in J-V has been consistently reported.
However, there’s still a bridge through which the significance of disorder and charge
localization is connected by the classical transport parameters such as mobility. The
effect of hopping can be further reflected by modifying mobility or carrier concentration
in J(n,F).
The trap-free space charge limited current (SCLC) is a simple model that makes
the connection. Assuming all the carriers contribute to the current flow is provided from
![Page 29: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/29.jpg)
29
injection, which means the material has a very low carrier concentration comparing with
injection; current is not injection limited, we can combine with , (
is the carrier charge, is the carrier concentration, is the local electric field, is the
carrier mobility, is the dielectric constant of the sample) and get Mott-Gurney law:49
. Due to the presence of traps and disorder, a decent trap-free SCLC
characteristic can only be found in certain bias conditions. The J-V in this range is
useful for the estimation carrier mobility. For the J-V characteristics other than ,50
the influence of disorder and localization has to be included.
Modifying the SCLC model with a trap distribution, e.g. single level and
exponential distribution, gives the so-called trapped charge limited current (TCLC).49, 51
Specifically, an exponential trap distribution helps to explain the slops that are larger
than 2 in the plot.50 The presence of traps changes the carrier concentration
n(E) since the DOS above trap states obeys a Boltzman distribution of
with NT as the trap states density and ET as the width of trap band.
Some other phenomenological approaches such as including temperature and
electric field dependence factors are also widely used to describe the J-V characteristics.
‘Poole-Frenkel’ theory52, 53 is a very useful model to study the electric field dependent
mobility. Although the mechanism used to derive the is a special case—the
carrier dissociation from a coulombic potential under the assistance of applied field F,
the dependence is very common in reported results. To better describe the
mechanism of field and temperature dependence, different disorder model was used.
Assuming a Gaussian distribution of DOS on LUMO or HOMO band with a diagonal
![Page 30: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/30.jpg)
30
disorder and an off-diagonal disorder to describe the variation of wavefunction
overlap, the field and temperature dependent mobility is described as following:41
(1-7)
wherein C is a fitting parameter. When , is replaced with 1.5 in Eq. 1-7. In
contrast to the Gaussian disorder model (GDM) which completely ignore the energetic
interaction between different molecule sites, the 3D correlated disorder model (CDM)54
assumes a random orientation of molecule dipoles and further calculated the energetic
fluctuation due to the dipole-dipole interaction with the nearest neighboring dipoles. The
following empirical expression was achieved:
(1-8)
wherein
, is a fitting parameter to describe the geometry disorder similar in
GDM, C0 is a constant equals 0.78, a is the lattice spacing. Eq. 1-8 is used to extract the
energetic disorder values in Chapter 4.
1.2.4 Bimolecular Recombination
Bimolecular recombination is a very common topic in all semiconductor related
devices. Since organic materials are intrinsic under equilibrium, low in carrier
concentration with one sun illumination, there’s no need to distinguish majority and
minority carriers. Some researchers pointed out OPV (under illumination) is majority-
carrier cell as they counted both hole and electron are majority carriers.33
According to different excitation condition, we can distinguish the dynamics based
on high or low level excitation. High level excitation means the number photo-generated
carriers is much larger than that in the background ( ). Using light source to
excite a cell originally under equilibrium condition is a typical example of high-level
![Page 31: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/31.jpg)
31
excitation. In Chapter 4, we will discuss a related experiment. In contrast, low level
excitation is fulfilled when . Usually, a low level-excitation can be realized by
using an attenuated source to generate a little fraction of carriers in the sample which is
simultaneously illuminated by an intensive source. The related recombination
measurements using low level excitation will also be discussed in Chapter 4.
The recombination dynamics due to high level excitation is described using
‘stretched exponential’ decay. The decay rate is usually in the form of:55
(1.9)
with is the initial carrier concentration due to the high-level excitation, is the time
dependent carrier lifetime, is a fitting parameter characterizing the dispersive
behavior of the disordered material sample. In contrast, the dynamics of the low-level
excitation is in the form of ‘single exponential’ decay:
(1.10) Since the background carrier concentration is a very large constant, the only parameter
that reflects the influence of background carrier is the lifetime constant.
Reviewing the origin of photovoltaic effect in OPV, or polymer solar cells
specifically, we can understand how significantly the bimolecular recombination process
impacts the PCE.56-58 When a BHJ cell is free of any bimolecular recombination, the
device performs as following: First, the quasi-Fermi level of electrons and holes will be
infinitely close to the band edge of LUMO and HOMO, resulting in negligible loss of VOC.
This is why the VOC measured under low temperature is very close to the effective
bandgap of the BHJ. Such a topic will be discussed in Chapter 6. Second, the increase
of carrier concentration at low internal field condition does not change the charge
generation and extraction, which means a FF value close to 100% if there’s also no loss
![Page 32: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/32.jpg)
32
due to space charge effect (see Chapter 3) and the charge collection at electrodes (see
Chapter 5). Third, the short circuit current will be increased slightly because bimolecular
recombination is limited by the very low concentration ( , is the concentration
of polymer/fullerene domain in a typical BHJ structure) at the short circuit condition.
1.3 Device Architectures
1.3.1 Bulk-Heterojunction (BHJ)
For the light absorbing layer, the idea of BHJ was created to provide more donor-
acceptor interface to result in more charge dissociation than the traditional two-layer
structure.59 By blending the donor and acceptor materials in the solution phase, the
resulting solid film is composed of two interpenetration networks of donor and acceptor
phases whose domains have a dimension around 10 nm. The actual size of polymer
and fullerene domain is very critical to the solar cell performance. An exciton generated
in a polymer domain need to migrate to the heterojunction interface before decaying to
S0. The charge generation will be greatly decreased when the domain size is too large.
Also, the carrier transport in such a network significantly relies on the connection
between each domain. Using the terminology of percolation theory, an over-mixed solid
solution may have a domain size that is too small to provide the critical number of
‘bonds’ to support the percolation network. Thus, the trade-off between charge
generation and transport determines there’s an optimum morphology for each system.
Many processing techniques have been reported to approach the optimum
morphology. Distinguished by the evaporation speed of solvent, there are thermal
annealing60, fast/slow-dried solvent processes61, 62. Using solvent additives is a novel
approach to optimum morphology in most polymer:fullerene systems. The merit of
solvent additives may rely in its high boiling point. However, the common additives such
![Page 33: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/33.jpg)
33
as 1,8-diiodooctane along with the chlorinated solvents that are used for dissolving the
polymer:fullerene blend are not compatible with environmental benignity. This will be a
concern for the future development of solar cell printing technology.
1.3.2 Electrode Contact
As another part of the sandwich structure in polymer solar cells, the electrodes
need to form Ohmic contacts with the active layer for the following reasons. First, it
helps to reduce the series resistance as well as the solar cell FF; second, it increases
the equilibrium built-in potential which is critical for VOC and JSC. The traditional
approach to form Ohmic contacts is to use conducting materials (such as metals and
transparent conducting oxides) with very large or small work function to provide a good
Fermi level alignment with the active layer. However, due to the instability of these
conducting materials as well as merits of solution processed transition metal oxides, the
later has become an effective way to make efficient polymer solar cells. The topic of
interface engineering will be discussed in Chapter 5.
![Page 34: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/34.jpg)
34
CHAPTER 2 CHARACTERIZING POLYMER SOLAR CELLS
2.1 Standard Spectra
The PCE of a solar cell is defined by the ratio of output electrical power and
incident radiative power. While the electrical power can be easily calculated through J-V
curves, the incident power from the solar simulator needs to be standardized. When the
sun and earth is separated by a mean distance ~149,597,890 km, the irradiance of the
sun that hits the outer atmosphere is about 136 mW/cm2. Such a constant is called the
solar constant which is also the origin of the terminology of “one sun”. Its value can be
varied due to the change of earth-sun distance and activity of the sun. From the outer
atmosphere surface to the ground, the irradiation is further reduced depending on the
air mass, zenith angle and path length. Air mass (AM) 1, 1.5 and 2 are used to
characterize the different conditions of the atmosphere effect. The conditions for the AM
1.5 spectra were widely chosen because they are representative of average conditions
in region of United States. There’s also a difference between direct spectrum and global
spectrum. The consideration here is to include the scattering and diffusion effect of
atmosphere and their contribution to the irradiation. That is why a direct spectrum has a
smaller radiative power than the global one since an additional portion is included.
AM 1.5G is one of the most commonly used standard spectra for the J-V
characterization of solar cells. It has the spectra showing in Figure 2-1 and an
integrated radiative power of 100mW/cm2.Depending on the spectrum content, spatial
uniformity and temporal stability, solar simulators are graded into different levels. Solar
cells’ EQE can be written as , is the flux of electrons that
are extracted with a monochromatic light at the wavelength of , is the flux of
![Page 35: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/35.jpg)
35
incident photons. Integrating the measured EQE spectrum with a standard solar
spectrum generates a current density that equals to the JSC measured under the same
standard spectrum.
Figure 2-1. Standard solar spectra
2.2 Transport Measurements
2.2.1 Space Charge Limited Current
Using the SCLC model to extract the zero field mobility is still the mostly used
approach to determine the electron and hole transport in the BHJ film. Trap-free SCLC
is usually fulfilled when the carrier injection increase to certain level so the quasi-Fermi
level can surpass the energies of most deep traps. To correctly extract the mobility
value, some details need to be considered. First, the injection contact needs to be
Ohmic to avoid injection limited current. For hole injection, a top contact of MoO3/Ag has
the highest injection efficiency comparing with other high work function electrodes that
![Page 36: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/36.jpg)
36
are currently used. LiF/Al is a good choice for electron injection. Second, the injection of
the other type of carrier should be avoided. For example, in the hole mobility
measurement, the electron injection needs to be blocked at the counter electrode, MoO3
is again a good candidate for the purpose. The structure of ITO/MoO3/BHJ/MoO3/Ag is
typical for measuring hole SCLC mobility. Third, the built-in potential needs to be
subtracted from the applied voltage before the data-fitting using the SCLC model.
Fourth, the voltage drop due to the series resistance at the contacts needs to be
subtracted. A TCO with a sheet resistance of 20 at least consumes 0.1V of voltage
when the current is 5mA. Finally, a ‘Poole-Frenckel’ factor needs to be included to
address the field dependence issue. A typical SCLC current is shown in Figure 2-2.
Figure 2-2. The J-V curves of two polymer:fullerene systems. The black line indicates the SCLC region. Both devices have the structure of ITO/MoO3/BHJ/MoO3/Ag. The holes are injected from the silver side.
![Page 37: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/37.jpg)
37
2.2.2 Carrier Extraction with Linearly Increasing Voltage (CELIV)
As observed in many polymer:fullerene systems, the J-V characteristics cannot be
fitted using trap-free SCLC model even with the fitting parameters such as the ‘Poole-
Frenkel’ factor. Sometimes the injection-limited current makes the mobility
underestimated.
Figure 2-3. A sketch showing the physical process of (Ph-)CELIV measurement.
Alternatively, a carrier transient measurement was invented with its advantage of
using a linearly increasing extraction field instead of a rectangular wave which is applied
in the traditional dark injection transient measurement63. The on-edge of a rectangular
wave V(t) has a first derivative closes to infinity, resulting in a huge RC response from
the sample since the magnitude of a RC oscillation is proportional to
. If carriers
are extracted using a linearly increasing voltage which has a constant
value, the
RC response does not superimposed with the carrier transient signal, making it possible
![Page 38: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/38.jpg)
38
to extract mobility values higher than 10-3cm2V-1s-1. This technique is called carrier
extraction using linearly increasing voltage (CELIV).64
A typical carrier transient signal is shown in Figure 2-3. Assuming a sample is
under flat band condition, a transient peak due to carrier extraction can be seen on top
of a rectangular signal which is a displacement current proportional to the increasing
rate (A) of the applied reverse triangle wave: . The triangle wave is applied
starting from a flat band condition. Thus, if the carriers to be extracted are photo-
generated e.g. by a laser pulse, the triangle wave should start from a positive value
which can compensate the photo-bias. The shape of the transient signal is highly
related to the transport balance between hole and electron. A detailed numerical
solution can be found in other references. The tmax in Figure 2-3 is called transient
maximum time, it characterizes the average mobility of the extracted holes and
electrons. Using tmax, the mobility can be calculated with either of the following:
or
.65, 66 Furthermore, by changing
the delay time tdel between the laser pulse and the onset of triangle wave, CELIV is able
to provide a relaxation-time-dependent CELIV mobility, which is a tool to probe the
energetic disorder and dispersive transport55 in different polymer:fullerene systems. The
experiment will be shown in Chapter 4.
2.3. Biomolecular Recombination Measurements
2.3.1 Photo-Carrier Extraction with Linearly Increasing Voltage (Ph-CELIV)
As seen in the last section, the extracted carrier concentration can be calculated
by integrating the transient signal. If the carriers are photo-generated using a short laser
pulse prior to application the linearly increasing voltage (by a delay time—tdel), photo-
![Page 39: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/39.jpg)
39
carrier recombination can be monitored. By changing tdel, the plot of carrier
concentrations vs. time is generated. Also, since Ph-CELIV will finally deplete the photo-
generated carriers, the recombination dynamics is the result of high-level excitation. The
related experiments and discussions will be presented in Chapter 4.
2.3.2 Transient Photo-Voltage (TPV)
Different from the recombination measurements based on a high-level excitation,
the so-called TPV technique measures the carrier decay due to a low level excitation i.e.
.58, 67 is background carrier concentration resulted from a solar simulator. The
photo-bias under one sun condition is close to the VOC of the sample.
Figure 2-4. The sketch of TPV setup and an example showing the TPV signals of a P3HT:PCBM solar cell.
Figure 2-4 shows a setup of TPV measurement, under the dynamic equilibrium
condition, e.g. at VOC, the bimolecular recombination rate is equal to the charge
generation rate as a result of continuity equation. Simultaneously, an attenuated pulse
laser is used to generate .The photo-voltage signal and the decay of the perturbation
are shown on an oscilloscope. As long as the excitation is kept at low level ( ),
the and share the same lifetime. To derive this conclusion, we need to get the
![Page 40: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/40.jpg)
40
differentials on both sides the photo-voltage expression:
. The decay rate of
photo-voltage can written as
. Thus the lifetime of
photo-voltage perturbation is the same as the carrier lifetime which is dominated by the
bimolecular process at open circuit condition. The results of TPV measures are included
in Chapter 4 and Chapter 6.
2.4 Probing the Energy Alignment
As will be discussed in Chapter 6, the topic of energy alignment is of unique
importance for a better understanding of polymer:fullerene BHJs.
2.4.1 Cyclic Voltammetry (CV)
The purpose of this section is to highlight the drawback of this traditional electro-
chemical method. The cyclic redox process is realized by scanning cyclic electric
potential of the working electrode. The actual potential value is further calibrated by a
reference electrode. The HOMO and LUMO levels of pristine materials can be
determined by the onset of charging and discharging currents. The measured results do
not have good repeatability. Due to the potential variation of different reference
electrodes, the error can be as large as 0.3 eV which is not acceptable for the study of
energy alignment of BHJ.
2.4.2 Electro-Absorption (EA) Spectroscopy
As a traditional differential spectroscopy, EA is used to study the fine structure of
energy bands in inorganic materials because those transitions cannot be detected by a
linear absorption measurement. Due to the external electric field, certain transitions are
altered due to the mixing of eigenstates. It was shown that the low-field-induced linear
dielectric function change in germanium is in good agreement with the third derivative of
![Page 41: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/41.jpg)
41
the linear dielectric function.68 Such a phenomenon is explained as a result of
discontinuous change of a second order term, i.e. the acceleration of electrons, leads to
a third order change in —the third derivative spectrum. The lineshape of EA spectra is
believed to be unchanged and scaled with . The analytical derivation of this process
is not included here. When the external field is larger than a perturbation, the band
structure of the sample will be changed, leading to the modification of energy levels
such as Stark shift.
Figure 2-5. Energy levels contributing to the Stark effect in a two-level dominant system
It has been shown that the model of Stark shift is in agreement with the EA
response of many -conjugated polymers.69, 70 This is probably due to their simpler
energy level structure than inorganic semiconducting materials. As shown in Figure 2-5,
the optical transition of many -conjugated polymers can be illustrated. A dominant
excitonic transition from 1Ag to 1Bu and their vibronic features compose the linear
absorption spectra. The transition from 1Ag to nAg is forbidden due to the selection rule.
With electric fields, due to the mixing effect between 1Bu and higher forbidden states,
![Page 42: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/42.jpg)
42
the transition from 1Ag to 1Bu is less allowed and the transition from 1Ag to nAg
becomes less forbidden. Again, using the time-independent perturbation theory here,
the mixing effect is shown in Eq. 2-1. is the result of non-vanishing matrix elements.
(2-1)
In the situation shown in Figure 2-5, Eq.2-1 can be reduced to the form of Eq. 2-2.
Using the classical description, the oscillating strength is transferred from the allowed
transition to the forbidden transition by a tiny fraction. Such a transfer of oscillating
strength leads to the subtle change in the linear absorption spectrum. By applying an
additional modulation field Fac, the subtle change in absorption spectra can be detected
by locking-in the first or second harmonic portion of the EA signal. As shown in Eq.2-4,
the DC field only exists in the term of first harmonic response while the second
harmonic term is related to the amplitude of the modulating field. Thus, apart from
detecting the position excitonic level, using Eq. 2-4, EA can also probe the equilibrium
built-in potential of an organic diode.71-73
(2-2)
(2-3)
(2-4)
The above conclusions are based on a simplified two-level model and the
approximation of perturbation, however, the experimental results of many -conjugated
polymers do show the same field dependence. When the transitions involve the higher
![Page 43: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/43.jpg)
43
continuous levels, ‘Franz-Keldysh’ effect needs to be considered,74 the discussion will
not be included here since they are not related to the experiments in Chapter 6.
If the sample is composed of more than one material, the detection of charge-
transfer related energy levels becomes impossible for the traditional electro-chemical
methods. However, EA is still able to provide clear signals due to its sensitivity to the
charge transfer process. As will be seen in Chapter 6, EA is used to study the effective
bandgap of polymer:fullerene BHJs. The origin of those subgap feature is totally
different from the above mentioned quadratic Stark effect. The subgap-pumping-
induced charge transfer from the HOMO of donor to the LUMO of acceptor gives rise to
the population of loosely bounded charge-pairs. These dipoles across the polymer-
fullerene interface can respond the external modulating field. With a higher energy than
the CT0 energy and relaxed polaron, these carriers generated by sub-bandgap pumping
induce additional features in the subgap region. The experimental instruction is detailed
in Chapter 6.
![Page 44: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/44.jpg)
44
CHAPTER 3 SPACE CHARGE LIMITED PHOTOCURRENT
3.1 Abstract
The development of photovoltaic polymers has been pushed by the demand of
high mobility, wide absorption band, low-lying highest occupied molecular orbital
(HOMO), better film morphology when blended with an electron accepting fullerene
derivative. In this chapter, in order to specify the impact of transport on the solar cell
performance, we carried out detailed transport experiments on some typical systems to
gain an insight into transport balance and its impact on the parameters such as fill
factors and short-circuit currents. The results show that, with severely unbalanced
electron-hole mobilities, the solar cells made from a series of dioxythiophene–
benzothiadiazole (DOT–BTD) copolymers (PG1–PG3) and fullerene derivatives show a
clear feature space-charge-limited photocurrent. In contrast, the systems based on
dithienosilole-benzothiadiazole (DTS-BTD), with fairly balanced transport and an
improved solar cell fill factor, exhibits no fingerprint of space-charge effect, leaving the
loss mechanism to be discussed in Chapter 4.
3.2 Introduction
As the follow-up topic of Chapter 2, it is necessary to reemphasize the well-known
operating mechanism of a BHJ solar cell: light absorption in polymer:fullerene absorber
creates excited excitons that subsequently migrate to the donor-acceptor interface and
dissociate via ultrafast charge transfer from the exited donor to the acceptor.3 Following
the photoinduced charge transfer, geminate pairs are formed across the interface,
which require further separation into free carriers (or polarons) by the internal electric
field. Subsequently, the free holes and electrons need to transport through the
![Page 45: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/45.jpg)
45
respective donor and acceptor phases, resulting in an external photocurrent. The
process of carrier transport occurs in the interpenetrating network defined by the
morphology of polymer and fullerene derivatives. Due to the nature of bulk-
heterojunection, electrons and holes still have great chance to meet each other at the
polymer-fullerene interface to facilitate bimolecular recombination which is a topic will be
covered in Chapter 4. The competition between the intensive recombination rate and
carrier transport finally determines the quantity of collectable carriers.
As a result of the weak van der waals force between the organic molecules, the
carrier transport in typical polymer solar cells is based on hopping mechanism, resulting
in the a carrier mobility of 10-5~10-3 cm2V-1s-1 which is significantly lower than that of
inorganic thin film absorbers such as multicrystalline/ amorphous silicon, chalcogenide
with an electron and hole mobility >10cm2 V-1s-1. It is important to notice that the mobility
values of organic materials highly depend on the characterization method. A lot of
organic molecules are reported showing hole mobilities over 1cm2 V-1s-1 when being
operated as a thin film transistor (TFT)75 wherein the transport is greatly facilitated by
interface-states-intermolecular-hopping. With large number of injected carriers filling the
traps in mobility tails and lifting the Fermi energy over the mobility edge,42 the mobility is
significantly increased and sensitive to carrier concentration.76, 77 In the contrasting
scenario of a thin film solar cell, the driven field is applied in the vertical direction,
allowing the limited amount of carriers to hop in a 3-dimension fashion or to be trapped.
As a result, it is usually observed that hole mobility values measured by vertical-
direction transport can be much lower than those displayed in a lateral-transporting thin
film transistor.
![Page 46: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/46.jpg)
46
The issue of low carrier mobility, especially hole mobilities, in polymeric materials
was once considered to be the overwhelming factor limiting the PCE of PSCs. Some
attempts purely focusing on the enhancement of hole mobility didn’t boost PCEs to the
level as expected.78, 79 Including the consideration of Langevin-related recombination,
some later computational results revealed that very high mobility values do not
necessarily benefit the solar cell performance.80, 81 Also, with very a high hole mobility in
the BHJ device, electrons become the slow carriers that cause imbalanced transport
which is to be discussed in the following. Consequentially, the question comes to—how
is the Jsc, FF affected within the hole mobility of 10-5~10-3 cm2 V-1s-1? To answer this,
the role of electron transporter, i.e. fullerene derivatives, has to be considered. First, we
consider the situation wherein the mean velocity of carriers is too small to let carriers
escape the recombination or trapping before reaching the electrode. This is common in
low mobility systems or samples with very large thicknesses. Such phenomenon is
called drift-length-limited photocurrent that the mean electron and hole drift lengths
wh(e)=h(e)h(e)E is smaller than the active layer thickness L: with h(e) the hole (electron)
mobility, h(e) the carrier lifetime and E the electric field, respectively. If the lifetime is
mainly determined by the bimolecular recombination, the extraction of photocurrent is
bimoledular recombination limited. Clearly, by tuning the thickness of solar cells, the
negative effect of drift-length photocurrent can be decreased. This partially explains why
most of the laboratory-made BHJ solar cells have an optimum device thickness ~
100nm. Second, the mobility of one type of carrier is significantly larger (>100 times)
than the other. This is quite typical in the earlier stage of the PSC development because
the fullerene phase keeps relatively constant electron mobility 10-4~10-3 cm2 V-1s-1, while
![Page 47: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/47.jpg)
47
the hole mobility in the polymer phase stay at 10-6~10-5cm2 V-1s-1. A direct impact of
such unbalanced transport is that holes tend to accumulate near the anode and change
the distribution of internal electrical field. To meet the requirement of charge neutrality,
most of the electric field will eventually drop on the space charge region to increase the
extraction of the slow carriers—holes and, on the other side, decelerate the extraction of
fast carriers –electrons by distributing less electrical field out of the space charge
region. The band diagram in Figure 3-1 helps to clarify the physical picture: space
charge accumulation induces the non-uniform field distribution which is manifested by
the band-bending at the anode site. Since the internal field is redistributed to the level
that just enabling slow carrier’s mean drift length reaches the length of the space charge
region, we have L1=1 1E1=1 1V1/L1, wherein L1 is the thickness of the space charge
region. Using the general expression of geminate pair extraction established by
Goodman82, we have:
(3-1)
q is the carrier charge. This equation describes the hole transport in the space charge
(hole) region wherein the population of electron is very limited. The amount of
accumulated holes will reach a limit that the hole generation in this region is just able to
provide the same carrier flux as the space charge limited current. Thus we have:
(3-2)
where JSCL is the space charge limited conduction expression derived by the
combination of Poisson’s equation and the assumption that movable carriers only come
from the external source such as carrier injection or photo-generation. or is the
dielectric permittivity. By reducing L1 from the expression, we get the expression of
space-charge-limited (SCL) photo-current ( ):83
![Page 48: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/48.jpg)
48
(3-3)
Figure 3-1. The sketch of space charge accumulation in a system with imbalanced
electron-hole mobility.
We see that, SCL photocurrent extraction not only shows a dependence
which is the same as the drift-length limited condition, but displays a behavior
which is different from the Jph ~ G dependence shown in Eq. 3-1. Thus, by measuring
bias photocurrent (Jph=Jillum-Jdark) under different incident power density, one can
experimentally determine if the photocurrent space charge limited. Experimentally, the
photocurrent dependence also relies on the device thickness, because the charge
accumulation needs to be supported by the significant amount of charge generation in
the sample.84 The first typical SCL photocurrent phenomenon was observed in a
MDMO-PPV:PCBM sample with a thickness close to 300 nm.83 The model of SCL
photocurrent is of significance for profiling the charge accumulation in BHJ layers. A
direct measurement of internal field distribution and charge accumulation is challenging,
while the measurement of bias/intensity dependent photocurrent enables a very
effective tool for the purpose. When the BHJ is composed of a fullerene derivative and a
![Page 49: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/49.jpg)
49
polymer with very low hole mobility, SCL photocurrent should be the dominant loss
mechanism of Jsc and FF of the solar cell. For the system with balanced electron-hole
mobility, the Jsc and FF loss should be related to either exciton dissociation, bimolecular
recombination or poor interlayer engineering which will be mentioned in the next few
chapters. In our experiments, some donor-acceptor polymers with different hole mobility
values will be discussed from the viewpoints of unbalanced charge transport to address
the loss mechanisms of FFs and Jscs in the resultant solar cells.
To experimentally probe the impact of SCL photocurrent, we compare the
performance of our model donor-acceptor copolymer (PG1-PG3): PCBM system with
that of two other model polymer systems optimized for solar cells: a low bandgap donor-
acceptor polymer poly[(4,4′-bis(2-ethylhexyl)dithieno[3,2-b:2′,3′-d]silole)-2,6-diyl-alt-
(2,1,3-benzothiadiazole)4,7-diyl], PDTS-BTD,85, 86 blended with PC71BM, with a broad-
band PV response over a range of 300 to 800 nm leading to PCEs exceeding 5%,85 and
a commercially available poly-(3-hexyl)thiophene: PCBM (P3HT: PC71BM) blend PV
ink system, Plexcore® PV1000, with a reported PCE higher than 4%. Among these
polymers:fullerene systems, the solar cells made by PG1-PG3 and PDTS-BTD all show
low FFs below 56% despite their discrepancy in Jsc s. Also, we didn’t prepare very thick
samples because very low FFs are observed even when we controlled the thickness
down to 150 nm. Figure 3-2 shows the molecular structure of copolymers PG1, PG2,
PG3 and the low bandgap polymer PDTS-BTD. We examine the photocarrier
generation processes and the carrier transport properties in these model systems, and
our analysis indicates that charge balance plays an important role in determining Jsc, FF
and thus the solar cell PCE.
![Page 50: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/50.jpg)
50
Figure 3-2. The structures of the polymers to be discussed.
3.3 Experimental
The series of low bandgap donor-acceptor copolymers named PG1, PG2 and PG3
based on dioxythienylenes, unsubstituted thiophene and benzothiodiazole building
blocks were synthesized as described elsewhere.87 PDTS-BTD was synthesized and
purified via a method involving significant modifications to a protocol reported in the
literature.85 The P3HT: PC71BM ink was provided by Plextronics Inc. Sputtered ITO on
soda-lime glass substrates were used as transparent electrode. All the organic layers
were spin-coated from solutions. Metallic electrodes were deposited in vacuum using
thermal evaporation. Hole-only devices had the structure of ITO/ poly(3,4-
ethylenedioxythiophene):poly(styrenesulfonate) PEDOT:PSS/polymer or
polymer:fullerene/Pd, while electron-only devices had the structure of ITO/active
layer/LiF/Al. As a conducting polymer with a work function ~ 5.2 eV, PEDOT:PSS forms
an Ohmic contact for hole injection, Pd suppresses electron injection into the organic
layer due to a large electron injection barrier built up by its work function (~5.2 eV)88 and
the lowest unoccupied molecular orbital (LUMO) energy of PCBM (~4.3 eV). To make
![Page 51: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/51.jpg)
51
electron-only devices, the ITO substrates were cleaned in acetone and isopropanol
without subsequent UV-ozone treatment to prevent hole injection. Solar cells had a
stacking-structure similar to the hole-only devices with LiF/Al replacing Pd as the low
work function cathode. Current density versus voltage measurements were carried out
in ambient using a Keithley 4200 semiconductor characterization system. For
photocurrent measurements, AM1.5G 100 mWcm-2 white light from a 150 W ozone free
xenon arc lamp (Newport) was used. A set of neutral density filters were used to control
the incident power density, from 35 mWcm-2 to 130 mWcm-2, for the study of charge
generation dependence. A Newport 70260 power meter in conjunction with a Newport
70268 detector was used to measure the power densities of the incident white-light. For
photocurrent measurements under reverse bias, the applied voltage is scanned from
+1V to -10V.
3.4 Results and Discussions
3.4.1 Carrier Mobility Measurements
According to the physical model presented in the introduction section, the
polymer:fullerene system with unbalanced hole-electron transport show SCL
photocurrent extraction which jeopardizes the FFs and JSCs in the resultant solar cells.
The first part of the experiment is to measure in the hole mobility of the actual BHJ layer
with the optimum solar cell performance. To achieve the best PCEs in devices made by
the three green DA polymers (PG1, PG2, and PG3), a very large proportion of the
electron-accepting PC60BM is required in the BHJ layer. Mixing a fullerene derivative
into a photovoltaic polymer can significantly alter the hole mobility from that in the
pristine materials.89, 90 Here, we use single-carrier devices to measure the charge carrier
mobilities, which is done by modeling the current density-voltage (J-V) in the dark with
![Page 52: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/52.jpg)
52
the space-charge limited current (SCLC) formalism assuming a field dependent
mobility.89, 90 For unipolar transport in a trap-free semiconductor with an Ohmic injecting
contact, the SCLC is given by the Mott-Gurney equation which is the first equation of
the Eq. 3-2, where µ is the charge carrier mobility, V1 should be switched to V as the
applied voltage across the whole active layer, and L1 is replaced by L as the thickness
of the active layer.
To determine the hole mobility, either in pristine polymers or in the polymer phase
of a blend with PCBM, we fabricated and characterized hole-only devices (details of
device fabrication and structures are provided in the Experimental section). From the J-
E measurements we determine a moderate hole mobility in PG1 of 5.4×10-8 cm2 V-1s-1.
Similar analyses from the hole-only devices yield increasing mobility values of 6.9×10-7
cm2 V-1s-1 and 3×10-6 cm2 V-1s-1 for PG2 and PG3 respectively. These results agree well
with the expected increase in backbone planarity of the copolymers (going from P1 to
P3) leading to improved hole transport.91 Next, charge transport in the hole-only devices
was characterized for blends of the three copolymers with PC61BM, with compositions
that yielded the best PV performance for each copolymer. Figure 3-3 displays the
measured J-E characteristics in the hole-only devices of the different copolymer: PCBM
blends. Interestingly, the hole mobilities in all of the blends of the copolymers PG1-PG3
with the fullerenes of optimum composition are enhanced significantly (to 2×10-6 cm2 V-
1s-1, 5×10-6 cm2 V-1s-1 and 2×10-5 cm2 V-1s-1 respectively), by one to two orders of
magnitude, compared to their corresponding values in the pristine copolymers. These
results are in agreement with those observed for the MDMO-PPV89, 90 and poly[2-
methoxy-5-(30,70-dimethyloctyloxy)-p-phenylenevinylene] (OC1C10-PPV)88 blends,
![Page 53: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/53.jpg)
53
where the hole mobilities in the polymer blends with PC61BM were significantly higher
than the values in the corresponding pristine polymer. Such compositional dependent
hole mobility is an interesting topic related with the formation of percolation network of
the polymer phase. The detailed discussion can be found in our original publication.92
Figure 3-3 also displays J-E characteristics of hole-only devices from PDTS-BTD:
PC71BM and from the P3HT: PCBM PV ink system. It is interesting to note that the hole
current-density in both these devices is significantly larger than in our PG: PC61BM
devices, indicating higher values of hole mobility.
Figure 3-3. Current densities as a function of effective electric field for different hole-only BHJ films with optimized donor-acceptor compositions for photovoltaic performance.
Here, we also address the electron transport and the charge balance in the
different polymer: PCBM blend systems. In order to determine the electron mobility in
the PCBM phase in a blend with a polymer, we fabricated electron-only devices from
![Page 54: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/54.jpg)
54
blends of PG3 and PDTS-BTD with PCBM of optimized composition (1:8 and 1:1.5,
respectively), and from the P3HT: PCBM blend ink system.
Figure 3-4. Current densities as a function of effective electric field for different electron-only BHJ films with optimized donor-acceptor compositions for photovoltaic performance.
The electron mobility in PG3: PC61BM (1:8) blend is determined to be 1.3×10-3 cm2
V-1s-1. The results show that even at its optimum composition, the electron mobility of
the PG3: PC61BM blend is about 2 orders of magnitude higher than the hole mobility
(2×10-5 cm2 V-1s-1), indicating an imbalance in charge transport. This imbalance in
carrier transport in the BHJ PV cells from PG3 is expected to lead to build-up of charges
and increased recombination events in the blend, resulting in lower efficiencies. The
electron mobilities of the PDTS-BTD: PC71BM (1:1.5) blend and the P3HT: PCBM ink
system are 1.2×10-3 cm2 V-1s-1and 4×10-4 cm2 V-1s-1, respectively. When compared to
the corresponding hole mobilities of 6.75×10-4 cm2 V-1s-1 and 5×10-4 cm2 V-1s-1 in the
PDTS-BTD: PC71BM blend and the P3HT: PCBM ink system, respectively, it can be
![Page 55: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/55.jpg)
55
concluded that carrier transport is significantly more balanced in these systems,
preventing charge build-up and reducing recombination.
3.4.2 Photocurrent Jph(V) Analysis
As mentioned, BHJ solar cells fabricated from the PG: PC61BM blends exhibit poor
performances. In particular, PG3: PC61BM shows a FF<45% and peak external
quantum efficiencies<50%.87 In this section, we investigate the origin of the low FF and
possible efficiency-loss mechanisms in the BHJ solar cells from PG3. Figure 3-5 shows
the photocurrent density, Jph, under simulated solar white light intensity of 100 mWcm-2,
as a function of the effective applied voltage Veff = V0−Vapp across the sample, for
different polymer:PCBM blends used in this study. The photocurrent density Jph is
defined as Jph = Jillumination−Jdark, where Jillumination and Jdark are the current densities under
illumination and in the dark, respectively.82, 83, 90, 93, 94 V0 is the value of applied bias Vapp
where the photocurrent in the device is minimum (Jillumination = Jdark), corresponding to a
zero-driving-force condition. The Jph –Veff plots from the solar cells of all three green
polymers (PG1, PG2, PG3) blended with PC61BM show three regimes. In the region
where the effective field is low (Veff <0.1 V), the photocurrent increases linearly with
voltage. This is followed by a region where a square root dependence of the
photocurrent (as shown by the solid line) as a function of effective voltage is observed.
Regarding the unbalanced transport, such intermediate region indicates that the
photocurrent probably be limited by the build-up of holes close to the anode of BHJ
solar cells, where Eq.3-3 holds. At last, there is a saturation region of Jph at large Veff
corresponding to high reverse biases, where all the dissociated electron-hole pairs are
extracted and collected at the electrodes, without observable bimolecular recombination
processes. In the saturation region, the photocurrent becomes a constant that is
![Page 56: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/56.jpg)
56
proportional to Gmax which represents the maximum generation rate of free carriers at a
given intensity of illumination.
Figure 3-5. Experimental photocurrent plotted as a function of effective bias.
It must be noted that at any given electric field and temperature, due to the strong
excitonic characteristics, geminate loss of excitons, unbalanced transport and
bimolecular recombination process, only a fraction of the photogenerated photo-
generated excitons will split into free carriers with dissociation efficiency (E,T). This
gives the generation rate at any given electric field and temperature as G(E,T) =
Gmax(E,T), while Jph = qGmax(E,T)L. To compare the efficiency of charge dissociation
at the donor-acceptor interface for the different copolymer: PC61BM solar cells, we
normalize the photocurrent by the experimentally observed saturation current density
(Jsat) in Figure 3-6. The short-circuit operation points are marked by the dashed lines in
the figure. While allows the determination of the maximum rate of
photogeneration of electron-hole pairs, Figure 3-6 gives a direct measure of the charge
dissociation efficiency at different applied biases. These parameters for the different
![Page 57: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/57.jpg)
57
copolymer: PC61BM combinations are presented in Table 3-1. The highest value of
Gmax, obtained for the solar cell fabricated from the copolymer PG3, is 4.7×1027 m-3s-1.
This electron-hole pair generation rate is 17% and 34% higher than the values in the
solar cells from PG1 and PG2, respectively. Under short-circuit conditions, i.e. at Veff =
V0, Figure 3-6 shows that only 39% and 43% of the total photogenerated electron-hole
pairs in the solar cells from PG1 and PG2 are successfully extracted and collected at
electrodes. In the devices fabricated from PG3, the short-circuit charge extraction
efficiency, sc, increases to 53%. However, at the maximum power point, where the
PCE is defined, this value drops to ~41%. Clearly, the FFs and JSCs in these solar cells
are limited due to the unbalanced transport and resultant Jph ~V1/2 behavior.
Table 3-1. Calculated maximum generation rate of electron-hole pairs and their separation efficiency under short circuit condition for blends of PG1, PG2, PG3 with PC61BM.
Composition PG1:PC61BM
(1:4) PG2:PC61BM
(1:5) PG3:PC61BM
(1:8)
Gmax (max generation rate; m3s-1) 4.0×1027 3.5×1027 4.7×1027
sc (at short circuit condition; %) 39 43 53
Figure 3-6. Normalized photocurrent plotted as a function of effective bias.
![Page 58: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/58.jpg)
58
3.4.3 Photocurrent Jph(G) Analysis
As mentioned in the previous section, the imbalanced carrier mobilities and the Jph
~V1/2 dependence is not sufficient to attribute low FFs and JSCs in the PG:PCBM
systems to SCL photocurrent. In particular, if the mean electron or hole drift length
becomes smaller than the active layer thickness, the main photocurrent loss is mainly
due to bimolecular recombination. Such recombination limited photocurrent is given by
Eq. 3-1. Experimentally, the two cases can be distinguished by performing light intensity
dependent measurements. While the SCL photocurrent scales with a 3/4 power
dependence on light intensity (Eq. 3-3), in the scenario of recombination limited
photocurrent, Jph in the V1/2 dependence region is linear with light intensity. Additionally,
the transition bias between the Jph ~V1/2 dependence and the saturation regime,
denoted as Vsat, should scale with the square root of light intensity in the former case,82,
83 while stay constant with different light intensity in the latter.57
Figure 3-7 shows the results of the Jph (Veff) as a function of illumination intensity.
Firstly, the photocurrent shows a regime with square root dependence on the applied
bias for all light intensities, this regime shifts to higher effective voltages with increasing
light intensity, and secondly, Vsat shifts with increasing light intensity. In Figure 3-8, we
show the intensity dependence of Jph (Veff) at three different effective biases,
corresponding to small, intermediate, and large internal field regimes.
The slope S, determined from a linear fit to the measured Jph, yields values of
0.75, 0.78 and 0.99 at 0.1V, 1.5V and 10V effective voltages, respectively. The Jph ~G3/4
dependence confirms the SCL photocurrent at small and intermediate internal fields.
![Page 59: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/59.jpg)
59
Figure 3-7. Photocurrent in PG3: PC60BM solar cells as a function of effective applied
voltage parametric in incident light intensity, measured at room temperature. Legends indicate different light intensities used. The arrow is a guide to the eye indicating the variation of the voltage at which the photocurrent enters the saturation regime. The short circuit operating point is marked.
Moreover, the fact that Jph exhibits a linear dependence (S=0.99) on light intensity
in the saturation region confirms that the photocurrent extraction neither limited by SCL
or bimolecular recombination. In Figure 3-9, Vsat is plotted as a function of incident light
intensity. A slope of 0.51 extracted from this plot confirms a Vsat~G1/2 dependence which
is consistent with the prediction.83 In sum, the light intensity dependent results confirm
that SCL photocurrent determines the significant FF and JSC loss in the PG3: PC61BM
BHJ system. It is interesting to notice that these samples reach the SCL photocurrent
limit at a thickness of ~150 nm (Figure 3-5) which is much smaller than the previous
findings in MDMO-PPV:PCBM systems. We postulate the different might stem from the
higher charge generation rate in a D-A polymer. The intensive dispersed mobility due to
large energetic disorder may also play a role.
![Page 60: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/60.jpg)
60
Figure 3-8. Photocurrent as a function of incident light intensity at three operating voltages, low, intermediate and saturation. Slopes determined from linear fits are shown and indicate space-charge limited behavior in the low and intermediate regime.
Figure 3-9. Saturation voltage as a function of incident light power.
3.4.4 Charge-Balanced Systems
In the preceding section, we demonstrated that, due to severely unbalanced
transport of electrons and holes, the BHJ of PG3:PC61BM leads to SCL photocurrents
![Page 61: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/61.jpg)
61
even at the illumination intensity as low as 35 mWcm-2. For a charge balanced system
where the photocurrent is not space charge limited, it can be expected to vary linearly
with intensity. The loss of photocurrent at low extraction field is purely due to the
recombination resulted from drifting length limitation.
In section 3.3.1, we showed the another low bandgap donor-acceptor polymer,
PDTS-BTD, exhibits an electron mobility larger than the hole mobility by a factor of 2 in
the polymer: PC71BM (1:1.5) system. In the P3HT:PCBM (PV ink) system, the electron
and hole transport are even more balanced. These two systems, along with the PG3:
PC61BM blend that was just presented, are surely typical to demonstrate the impact of
charge balance on the performance of polymer solar cells.
Figure 3-10. Photocurrent as a function of effective applied voltage for different incident light intensities for PDTS-BTD: PC71BM.
Figures 3-10 and -11 show the Jph (Veff) plotted as a function of illumination
intensity in the PDTS-BTD:PC71BM and P3HT:PC61BM PV ink systems. In contrast to
the PG3: PC61BM system, the Jph (Veff) curves in both PDTS-BTD and P3HT: PCBM ink
![Page 62: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/62.jpg)
62
devices are much steeper than those in the PG3: PC61BM blends before they reach the
saturation region.
Figure 3-11. Photocurrent as a function of effective applied voltage for different incident light intensities for PV1000 ink solar cells.
Moreover, the photocurrent for all incident light intensities become saturated at a
effective bias as low as 0.4 V and stay almost constant at higher fields, indicating higher
charge extraction efficiency at low biases. The trend of Jph ~V1/2 was not observed in
any region of the curves, indicating no SCL effect. The impact of bimolecular
recombination, a topic in Chapter 4, is hard to distinguish here because even no Jph
~V1/2 dependence was observed, the severe recombination may happen at certain bias
condition which directly determines the carrier concentration in the sample. Additionally,
a Vsat that does not vary with incident light intensity also substantiates this. The data
also points out another outperforming-factor in the PDTS-BTD: PC71BM and P3HT:
PCBM PV ink systems, compared to PG3: PC61BM, that the short-circuit point locates in
the regime where Jph is already saturated. This saturation of Jph results in much higher
![Page 63: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/63.jpg)
63
short-circuit charge dissociation efficiencies, 70% for the PDTS-BTD:PC71BM and 83%
for the P3HT: PC61BM. A combination of the absence of SCL photocurrent and the
saturation of Jph at relatively low fields results in higher FFs in these two PV systems.
Especially for P3HT, FF can reach >65%.
Figure 3-12. Short-circuit photocurrent as a function of incident light intensity for the two photovoltaic systems shown in Figure 2-10 and 2-11. Slopes determined from linear fits are shown.
3.5 Summary
We have studied charge transport, photocurrent extraction in BHJ solar cells
fabricated from three different polymer: fullerene model systems to understand the
dependence of PV performance on transport balance. In the series of dioxythienylene-
benzothiodiazole donor-acceptor co-polymers blended with PC61BM that are targeted
for color-tunable photovoltaics, hole transport in the polymer phase of the blend is found
to be enhanced by one to two orders by loading PC61BM. However, even in the
optimized composition, due to unbalanced mobilities between electrons and holes,
space charges (holes) induce redistribution of internal electrical field and eventually
![Page 64: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/64.jpg)
64
reach a steady state wherein the photocurrent output is limited by the slow carrier,
leading to a reduction of FFs in these devices. In contrast, carrier transport in the PDTS-
BTD: PC71BM and the P3HT: PCBM PV ink systems is more balanced, resulting in
significantly improved charge separation efficiency and fill factors. These findings
reinforce the importance of attaining charge balance in these BHJ devices to avoid
space charge effects in donor-acceptor blends for PV applications. The difference of
recombination loss between PDTS-BTD:PCBM and P3HT:PCBM will be discussed in
Chapter 4.
![Page 65: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/65.jpg)
65
CHAPTER 4 BIMOLECULAR RECOMBINATION LIMITED PHOTOCURRENT
4.1 Abstract
The model of transport balance is not sufficient to explain the loss of photocurrent
in some bulk-heterojunction systems. With the development of advanced donor-
acceptor polymer, high hole mobility and low bandgap can be realized. However, many
of these solar cells still suffer from low fill factors—poor photocurrent extraction at the
low extraction field. We detailed the investigation by comparing the recombination
dynamics in two model systems with fairly balanced transport. The results show
bimolecular recombination can be the limiting factor of photocurrent extraction even
without the existence of space charge effect. Further experiments also show that larger
rate of bimolecular recombination is associated with the large energetic disorder in the
blend system.
4.2 Introduction
As a bench-mark BHJ system, the blend of poly(3-hexylthiophene-2,5-diyl) (P3HT)
and [6,6]-phenyl C61 (or C71) butyric acid methyl-ester (PC61BM or PC71BM) has been
extensively studied to reach a PCE approaching 5 % and FF close to 70%.95 Optimized
P3HT: fullerene solar cells demonstrate almost saturated photocurrent output even at
low extraction fields,92, 96. However, the loss of low energy photons in the solar spectrum
limits the further enhancement of P3HT system. To increase photon harvesting,
tremendous effort has been taken to develop low bandgap donor-acceptor copolymers
with absorption edges extended to the near IR range.85, 97-99 High short-circuit currents
and high open circuit voltages have been achieved in some low-bandgap, deep-HOMO
polymer:PCBM systems, resulting in PCE exceeding 7%.29 At the same time, many
![Page 66: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/66.jpg)
66
potential polymer:PCBM systems show both balanced transport and low FFs, we
therefore think it is necessary to figure out the physical processes that limit the
performance in these low bandgap polymer:fullerene systems.
In this chapter, we examine the low bandgap donor-acceptor copolymer poly ((4,
4- dioctyldithieno (3,2-b:2',3'-d) silole) -2,6- diyl-alt- (2,1,3- benzothiadiazole) -4,7-diyl)
(PDTS-BTD which has yielded a PCE over ~6% 100 when blended with [6,6]-phenyl-C71
butyric acid methyl ester, PC71BM. However, the maximum FF attained in these devices
is only 56%. In contrast, P3HT:PC71BM cells fabricated in many laboratories including
ours regularly attain FFs of 65-70% (Figure 4-1). Higher FF characterizes more efficient
photocurrent collection, especially in the low field condition. Therefore, understanding
the loss mechanism may lead to the methods for better solar cell performance.
Figure 4-1. (color) J-V characteristics of a P3HT:PC71BM cell and a PDTS-BTD:PC71BM cell measured under A.M. 1.5G illumination.
![Page 67: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/67.jpg)
67
Considering the PDTS-BTD:PC71BM system, we find that the mobilites of electron
and hole are well-balanced. Similar to what has been observed in P3HT:PC71BM
system, the space charge effect cannot be the limiting factor of solar cell FFs. As
mentioned in Chapter 3, both systems don’t show a Jph ~V1/2 dependence, suggesting
no significant recombination-limited photocurrent under the medium or large bias
condition. However, the carrier dynamics remain unclear at the zero-internal-field
situation which corresponds to a very narrow window in the Veff axis. At such low
extraction field, the device has a very high concentration of photo-generated carriers
and therefore the trend of intensive recombination. Here, we examined the carrier
recombination rate in both P3HT:PCBM and PDTS-BTD:PCBM systems through photo-
induced carrier extraction with linearly increasing voltage (photo-CELIV)65 and transient
photo-voltage (TPV)67, 101, 102 experiments. Photo-CELIV allows one to adjust the
internal field, such as the field corresponding to the maximum power point, of devices
during the recombination measurement. In contrast, TPV is carried out by shinning
continuous white light on the sample and generating high concentration of carriers.
Since the sample is measured under the open-circuit condition, TPV provides carrier
recombination results that are complementary to the photo-CELIV measurements. Our
photo-CELIV data show that, the two polymer:fullerene systems both show sufficiently
long carrier lifetime to avoid recombination limited photocurrent at the power maximum
point. However, with the increase of carrier concentration at lower extraction field,
PDTS-BTD:PC71BM exhibit much shorter carrier lifetime than P3HT:PC71BM, leading to
significant photocurrent loss at the open circuit condition. Such intensive recombination
can also lower the open circuit voltage in PDTS-BTD:PC71BM.
![Page 68: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/68.jpg)
68
Further, we correlate the recombination rates of the two blend systems with the
intrinsic property of the polymer donor. By considering carrier recombination as a
process of charge transfer described by the small polaron model,4, 103 the short photo-
carrier lifetime in the PDTS-BTD:PC71BM system can be attributed to the higher degree
of diagonal disorder in this polymer.
4.3 Experimental
PDTS-BTD was synthesized and purified via a method involving significant
modifications to a protocol reported in the literature85. Details of the fabrication of single
carrier devices and PV devices are also provided elsewhere87, 100, 104. Hole-only devices
had the structure of ITO/ MoO3/ active layer/ Au, electron-only devices had the structure
of ITO/ active layer/ LiF/Al. MoO3 was used as hole injection layer because it provides
better hole injection than poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate)
PEDOT:PSS. ITO without UV ozone treatment matches the LUMO level of PCBM.
Current density versus voltage measurements were carried out in ambient using a
Keithley 4200 semiconductor characterization system. For temperature dependent
measurements, a LakeShore 321 temperature controller and a Janis VPF-100 cryostat
were employed. The photo-CELIV setup consists of a LASER-EXPORT DTL-319QT
(527 nm, 8 ns time width, 60 μJ/pulse) laser source, an Agilent 33220 20MHz
function/arbitrary waveform generator, a Tekxtronix TPS2024 oscilloscope and a SRS
DG535 delay/pulse generator. The laser was used to generate photo-carriers for
extraction. The delay generator was used as a triggering source as well as delay time
controller of the function generator and the laser pulse. The photo-generated carriers
are extracted by the triangle wave applied by the function generator. Detailed
description of the experimental setup can be found in previous publications.64 For
![Page 69: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/69.jpg)
69
transient photo-voltage experiment, the white light for photo-biasing the sample was
obtained from a 150 W ozone free xenon arc lamp (Newport). Different intensities were
achieved by using a set of neutral density filters, and were calibrated by a Newport
70260 radiant power meter in conjunction with a Newport 70268 photodiode. Photo-
voltage decay was obtained using a Tekxtronix TPS2024 oscilloscope. The
fundamentals of the optical perturbation as well as the calculation of charge density
were reported elsewhere.105, 106
4.4 Results and Discussions
4.4.1 The Balance of Charge Extraction
In the BHJ polymer: fullerene solar cells, the transport of holes and electrons
happens through different percolation pathways. The nature of hole transport of the
blend is thus quite different from that of the neat polymer. The hole mobility in this
situation is not only determined by the donor polymer, but is also affected by the
bicontinuous nanostructure formed together with PCBM. As a result, the transport of
both electrons and holes is influenced by the composition and morphology of the
polymer: fullerene system.89, 90, 107 Since mobility in these composite systems is highly
sensitive to the material compositions and processing conditions, electrons and holes
might have different transport properties. A strong imbalance in the mobility of the two
types of carriers results in inefficient extraction of the faster carriers to maintain charge
neutrality in the device. This leads to accumulation of space charges in the device and
reduction of photocurrent extraction. Moreover, the accumulated space charges
promote local increase of recombination which is an additional source of loss
mechanism caused by unbalanced transport.90
![Page 70: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/70.jpg)
70
Figure 4-2. (color) J-V characteristics of a hole-only and an electron-only device of PDTS-BTD:PC71BM. The SCLC fitting is shown.
The balance of carrier transport in the PDTS-BTD:PC71BM blend was determined
by measuring electron and hole mobility from single carrier devices. Figure 4-2 shows
the electron and hole only current of PDTS-BTD:PC71BM blends. The current density-
voltage (J-V) data was fitted by assuming the SCLC formalism and a field dependent
mobility. For unipolar transport in a trap-free semiconductor with an Ohmic injecting
contact, the SCLC is given by the Mott-Gurney equation,
, (4-1)
where µ is the charge carrier mobility, V is the applied voltage, and L is the thickness of
the active layer. As summarized in Table 1, zero-field mobilities of 9.6×10-4 cm2Vs-1 and
5.2×10-4 cm2Vs-1 are calculated by taking into the account of the device series
resistance, respectively for electrons and holes. As revealed by the mobility values, the
transport of electrons and holes in PDTS-BTD:PC71BM is well balanced. Compared to
![Page 71: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/71.jpg)
71
the mobilities in P3HT: PC71BM, which are also included in Table 1, PDTS-BTD:PCBM
has even higher mobility for both carriers. Since the balanced transport in P3HT:PCBM
has been reported92 as the key reason for its high FF, this leads us to believe that a
similar situation, if not a better one, prevails in the PDTS-BTD:PCBM system as well.
Table 4-1. Hole and electron mobility in PDTS-BTD:PC71BM and P3HT:PC71BM.
h e
PDTS-BTD:PC71BM 5.2 × 10−4 cm2 V-1s-1 9.6 × 10−4 cm2 V-1s-1
P3HT-BTD:PC71BM 2.9 × 10−4 cm2 V-1s-1 4.0 × 10−4 cm2 V-1s-1
However, from Figure 4-3, showing the photocurrent as a function of extraction field, it is
clear that despite the balanced transport properties of the two material systems, the loss
of photocurrent behaves quite differently. For P3HT, the photocurrent gets nearly
saturated even at low extraction field and reaches 82% of its maximum under short
circuit condition, while the photo-current extraction in PDTS-BTD:PC71BM is far from
saturation and only reaches 68% of its maximum under short circuit condition. The
external quantum efficiency reported for the two systems 85, 95 supports this difference in
extraction efficiency. At lower extraction field, P3HT:PC71BM maintains its photo-current
before the sharp drop around 0.4 V. In contrast, PDTS-BTD:PC71BM has a much
stronger field dependent photo-current over the entire range of cell operation which
leads to lower FF in the solar cells. As shown by the carrier mobility values, the
imbalance of carrier transport leading to build up of space charges is not the factor
limiting photocurrent extraction. The difference in the extraction of photocurrents,
therefore, must have its origin in a different limiting mechanism. The following sections
will be dealing with another possible limiting factor—bimolecular recombination.
![Page 72: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/72.jpg)
72
Figure 4-3. (color) Jph plotted as a function of effective voltage.
4.4.2 Recombination at the Maximum Power Condition
According to the J-V characteristics of the devices under illumination, the loss of
photocurrent happens both at low extraction fields and under open circuit condition. In
this study, we employ the technique of photo-CELIV65, 108 to study bimolecular
recombination at power maximum condition, which starts with a low extraction field
across the cell. The low extraction field is simulated by biasing the solar cell devices to
voltages approaching the open circuit voltage (Voc) which is slightly lower than the
photo-bias provided by a 527nm pulse laser with a maximum power of 60 μJ/pulse. This
offset voltage is maintained just below the dark current turn-on voltage (power
maximum point) to ensure that the number of injected carriers from the contacts is
negligible compared to the population of photo-carriers generated by the laser pulse.
Figure 3.3(a) shows the photo-CELIV transients from the PDTS-BTD samples. By
introducing a variable delay between the exciting laser pulse and the onset of carrier
![Page 73: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/73.jpg)
73
extraction, we can introduce different recombination times in the system under
investigation.
Figure 4-4. (color) Photo-CELIV curves of PDTS-BTD:PC71BM as a function of delay time
Figure 4-5 plots the decay of photocarrier concentration as a function of time in the
two systems, which is obtained by integrating the photo-CELIV transients. Here, the
time scale is composed of the delay time and transient maximum time. The delay time,
as mentioned earlier, is the time between the application of the laser pulse and the
extraction voltage ramp, while the transient maximum is the time when the transient
current reaches its peak value. In the photo-CELIV experiment, the samples are initially
in the dark before photocarriers are generated by the laser. In this case the excitation
cannot be considered as a “small signal”, and the subsequent carrier recombination
happens after a strong excitation. According to Figure 4-5, the concentration of photo-
carriers, consequently, follows a “stretched” exponential decay55.
(4-2)
(4-3)
![Page 74: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/74.jpg)
74
(4-4)
Figure 4-5. (color) The recombination dynamics extracted from the photo-CELIV results
where n and p stands for electron and hole concentrations respectively, γ is
temperature dependent dispersive parameter, k0, the recombination coefficient at time
zero. To fit the data, γ was measured to be 0.98 and 0.90 respectively for
P3HT:PC71BM and PDTS-BTD:PC71BM. The resultant lifetimes are 19±0.5μs for
P3HT:PC71BM and 16±0.5μs for PDTS-BTD:PC71BM. Thus, according to the lifetime
results, P3HT:PC71BM and PDTS-BTD:PC71BM show similar carriers decay rates at low
extraction fields. The carrier lifetime data can further be used to calculate the
bimolecular recombination rate by assuming a Langevin type recombination for low
mobility materials where the recombination rate is
,
, (kL –Langevin recombination coefficient) (4-5)
Calculated results show that the ratio of the recombination rates k/kL is about 10-3.
The resultant recombination induced photo-current loss ~10-2mA/cm2, which is similar to
![Page 75: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/75.jpg)
75
other results found under short circuit condition35. This negligible bimolecular
recombination photocurrent at low extraction fields can be rationalized as follows.
Before current injection turns on in the device, the drift current determines the
“extraction current”. Due to the extraction field, the photo-generated carriers are
depleted, resulting in lower carrier concentration comparing with the open circuit
condition. Since the recombination coefficient and the recombination rate are both
sensitive to carrier concentration, the photo-current at or close-to short circuit condition
is not affected significantly by recombination. Even at a bias just below the dark current
turn-on voltage, recombination is still limited as shown by the photo-CELIV results. The
nano-morphology of the bicontinuous interpenetrating network in both systems 95, 100
also explains why the recombination is reduced at extraction field. The bulk-
heterojunction enables the formation of electron and hole percolation pathways and
improve the transport in both phases. At a carrier concentration (~1016 cm-3) lower than
the domain concentration (~1017 cm-3), the probability of holes and electrons to meet
and recombine is limited.35 In such a situation, mono-molecular 109, 110 (geminate
recombination) may overwhelm the bimolecular process and become the dominant
recombination mechanism.
A few points regarding the technique of photo-CELIV and its relevance and
shortcomings in probing recombination in these BHJ solar cells need to be pointed out.
First, photo-CELIV does not provide true operating conditions necessary for inducing
strong carrier recombination since it does not continuously flood the device with high
carrier concentration. Second, while both the polymer:fullerene systems in our study
show similar lifetimes, their results are extracted from different carrier concentration
![Page 76: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/76.jpg)
76
levels. The carrier concentration is also relatively low compared to that under open
circuit condition. The lower carrier concentration can be partially explained in Figure 4-4.
Because solar cells do not have blocking layer in terms of extraction, the application of
laser pulse can collect the carriers at contact region under low extraction field thus
generates some instantaneous current signals which correspond to carrier
concentration ~ 1016 cm-3. Finally, photo-CELIV does provide low extraction field but not
true open circuit condition. Even through a bias can be tuned for the purpose, the photo-
bias is very sensitive to laser pulse and makes it hard to fulfill the true open circuit
condition. Due to all these, it is necessary to resort to a different technique to probe
further the recombination properties in these material systems.
4.4.3 Recombination at the Open Circuit Condition
The recombination in BHJ solar cells at open circuit condition is a topic that has
has been a topic of discussion over recent years.101, 111, 112 Despite the existence of a
diffusion current, there’s no net current flow in the device due to the absence of internal
electric field. Since carrier recombination is a function of background charge density, the
magnitude of extraction field is expected to play a more significant role in this case, and
the results are anticipated to be different from those acquired through the photo-CELIV
experiment which only measures the recombination under power maximum condition.
Also, as recombination directly affects the carrier concentration in the sample, such a
value can also be easily extracted using a lifetime measurement. The obtained charge
carrier population can not only be used to analyze the photocurrent loss and FFs, but
also the splitting of quasi-Fermi levels and VOCs of polymer:fullerene systems.
![Page 77: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/77.jpg)
77
Figure 4-6. (color) The recombination dynamics extracted from transient photo-voltage measurements with different incident light intensity
Transient photo-voltage (TPV) is a technique that, in contrast to photo-CELIV,
provides continuous solar illumination and true open circuit condition. Under illumination
with a solar simulator the device is under a light-bias, and subsequently, a weak laser
pulse with a typical energy ~1 nJ/pulse impinges on the photo-biased device, creating a
weak perturbation (Figure 2-4). Following this, the temporal decay of photo-carriers can
be monitored by probing the decay of perturbation (<5mV) created by the laser pulse67,
102. In this study, we applied TPV to study the recombination at open circuit condition.
The P3HT:PC71BM and PDTS-BTD:PC71BM solar cell devices used for these
measurements have PCEs of 4% and 5.5% respectively. The intensity of the solar
simulator is varied to change the background charge density in the devices. As is
evident from the photo-voltage transients in Figure 4-6, the photo-carrier lifetime varies
inversely with the charge density in both systems. However, at the maximum charge
![Page 78: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/78.jpg)
78
density (100 mW/cm2 in this experiment), photocarriers in the P3HT:PC71BM cell have a
lifetime of ~ 8 μs which is more than one order of magnitude higher than that in PDTS-
BTD:PC71BM ~ 400 ns (Figure 4-7). Additionally, P3HT:PC71BM cells have a larger
charge density than that of the PDTS-BTD:PC71BM cells when the dynamic equilibrium
between the photo-carrier generation and recombination, given by the equation,
(4-6)
is reached. Here, Gmax is the internal carrier pairs generation rate and P is the
proportion of exciton dissociation. Since the effective generation rate of photo-carriers
(PGmax) is roughly of the same order in the two polymer:fullerene systems, the longer
carrier lifetime in P3HT:PC71BM results in a larger carrier density.
Figure 4-7. (color) The carrier lifetimes of P3HT:PC71BM and PDTS-BTD:PC71BM systems.
Additionally, PDTS-BTD:PC71BM cells show a stronger dependence of carrier lifetime
on charge density (in the form of photo-bias in Figure 4-7). Hence, the difference of
lifetime between the two systems becomes smaller when carrier concentration
![Page 79: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/79.jpg)
79
decreases, allowing for both PDTS-BTD:PCBM (n~1015 cm-3) and P3HT:PCBM (n~1016
cm-3) to show very similar lifetimes ~20 μs. This value is very close to the results from
photo-CELIV experiments, as highlighted in Figure 4-7. In the two measurements,
although recombination happens under different extraction fields, the lifetime is mainly
determined by carrier concentrations.
Figure 4-8. (color) The recombination coefficients of P3HT:PC71BM and PDTS-BTD:PC71BM systems.
Another important parameter determining photocurrent loss is the strength of the
recombination rate compared to the Langevin mode rate which is shown in Figure 4-8.
In PDTS-BTD cells ratio of k/kL ~10-1 is significantly high, with a stronger dependence
on charge carrier density. In contrast, in P3HT:PC71BM, this ratio is ~10-3 has and
shows a very weak dependence on charge density. As a consequence, at the extraction
field lower than the maximum power point, the photo-current loss due to bimolecular
recombination is as high as ~1mA/cm2 in PDTS-BTD:PC71BM devices while it is ~0.1
![Page 80: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/80.jpg)
80
mA/cm2 in P3HT:PC71BM cells. Although the loss of photo-current reduces when the
extraction field grows, it still explains why PDTS-BTD:PC71BM cells show low FF. At
zero extraction fields, the dynamic equilibrium is estabilished. Thus recombination loss
equals the charge generation rate. When the internal field emerges, the short (400ns)
carrier lifetime leads to a photo-current loss >1 mA/cm2, thus lowering the extraction
and pushing the maximum output power to a lower bias. At the power maximum point,
recombination rate decreases with decreased carrier concentration. Finally, at even
higher extraction fields (at and beyond short circuit condition), the dynamic equilibrium
between generation and recombination is completely broken. The photo-generated
charges almost contribute to the output current, while recombination loss is negligible.
Moreover, since most of the generated carriers are pulled out of the device, the carrier
lifetime in different material systems should be similar. Even at extraction fields lower
than the short circuit condition, this similarity of lifetimes prevails until the charge
injection turns on. This fact further stresses the difference between photo-CELIV and
TPV techniques in probing carrier recombination. The experiments also show that
although recombination is less likely to be a universal loss mechanism over the entire
bias range, it can rationalize the FF difference between two efficient polymer: fullerene
systems.
4.4.4 Energetic Disorder
Once we have established that carrier recombination plays a critical role in limiting
the photo-current in the PDTS-BTD based cells, it is important to figure out the physical
reason for the stronger recombination compared with the P3HT based cells. In
disordered material systems, the electric and optical properties are often correlated with
the degree of disorder.
![Page 81: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/81.jpg)
81
In amorphous silicon solar cells with a strong energetic disorder, the main source
of photo-current loss was identified as the recombination of photocarriers in band tail
states. In disordered materials, tail states exist in the bandgap. Photogeneration of
carrier pairs is followed by energetic relaxation to attain dynamic equilibrium state. The
photogenerated carriers are likely to execute a random walk, basically spatial tunneling,
between neighboring energy states before relaxing into tail states. The overall shift of
mean energy caused by relaxation is determined by the energetic disorder and
temperature. The expression for this energy shift is given as41, 113
(4-7)
where is the energetic disorder and, k is Boltzman constant, T is temperature in Kelvin.
As a result, the photo-carriers finally get distributed over these large number of tail
states. Carrier transport is significantly slower through these tail states than the
transport through mean states. Energy relaxation is further enhanced when the material
is cooled to low temperatures, because spatial tunneling dominates over thermally
activated transport. This is alternately described as the occurrence of a larger effective
energetic disorder at lower temperature. Photo-CELIV can provide information about
this energetic disorder. The delay time dependent measurement using photo-CELIV
allows us to probe the energy relaxation in different polymer:fullerene systems.55, 108 In
Figure 4-4, we calculate the CELIV mobilities from the expression
(4-8)
where d is the device thickness, A is the voltage ramping rate in Vs-1, tmax is the
transient maximum time, Δj and j(0) are respectively the magnitude of pure transient
current and displacement current.114 The transport of PDTS-BTD:PCBM shows a strong
![Page 82: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/82.jpg)
82
dependence on the variable delay time by demonstrating a longer transient time when
delay time increases. In addition to this, PDTS-BTD:PCBM shows a clear reduction of
mobility with the growth of delay time in Figure 4-9. As explained above, with longer
delay times, more photo-carriers get a chance to relax into tail states with the transport
getting slower when the electric field is applied. Thus, this type of mobility degradation is
a proof of energetic disorder at a certain temperature. In contrast, the mobility of carriers
in the P3HT:PC71BM system does not show any signs of reduction (Figure 4-9) at the
same temperature (RT in this case). However, by taking advantage of the above
mentioned relationship between temperature and effective energetic disorder, this
decay of CELIV mobility should be detectable at low temperatures. This data depicting
the decay of mobility at 100K in the P3HT:PC71BM system is also shown in Figure 4-9.
From these results it can be concluded that the P3HT:PC71BM system has lower
energetic disorder than the PDTS-BTD:PC71BM system at room temperature(RT). This
disorder cannot be detected using photo-CELIV experiment at RT. But, by going to
temperatures as low as 100K, thermally activated transport is greatly suppressed, and
the large population of carriers in tail states then allows photo-CELIV to detect the
disorder in the P3HT:PCBM system.
Energetic disorder, which is the origin of delay time dependent mobilities, can be
quantitatively estimated with the assumption of a specific DOS model. Upon photo-
excitations, the DOS of the polymer relax on the coordinate of energy. In other words,
the carriers relax into tail states between which the hopping process is quite limited
comparing with the states above the mobility edge. Several models have been
formulated to describe the origin of disorder in materials.
![Page 83: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/83.jpg)
83
Figure 4-9. (color) CELIV mobility as a function of delay time.
Figure 4-10. (color) Zero field mobilities plotted as a function of temperature.
In this study, we employ the 3D correlated disorder model54 to model the energetic
disorder and its nature in these composite systems. This model assumes a random 3-
dimentional distribution of dipoles in the material. The disorder in molecular site energy
![Page 84: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/84.jpg)
84
stems from the interaction between these dipoles. The carrier mobility is calculated and
experimentally proven to have the following field and temperature dependence in the
form of Eq. 1-8. Using this expression, the effective energetic disorder in the system can
be extracted by plotting the zero-field mobility as a function of temperature. In Figure 4-
10, energetic disorder is extracted to be 84meV for the PDTS-BTD:PC71BM system
compared to 61meV for the P3HT:PC71BM system. The increased disorder in the low
bandgap polymer:fullerene system is consistent with the earlier findings from photo-
CELIV. PDTS-BTD:PCBM indeed has a broader tail band distribution of molecular
energies than P3HT:PCBM, leading to the higher degree of disorder in the material.
4.5 Summary
In this study we investigated the physical processes limiting the FF in a low
bandgap polymer:fullerene system. We studied the transport and recombination of
photo-carriers in the PDTS-BTD:PC71BM BHJ system and compare the results with the
highly optimized blend of P3HT:PC71BM. Mobility measurements shows well balanced
transport of electrons and holes in PDTS-BTD:PC71BM cells; this rules out the
possibility that photo-current loss is due to unbalanced transport. Two different
techniques are used to study photo-carrier recombination under different extraction
fields. Results from the photo-CELIV measurements show that the recombination of the
two systems at Pmax condition does not limit the photo-current. In contrast, carrier pairs
experience strong recombination when the PDTS-BTD solar cells are operated at open
circuit condition, leading to a significant loss of photo-current. The differences in lifetime
are found to be determined by the carrier concentration at corresponding extraction
fields. Finally, we show a correlation between the strong recombination of photo-carriers
in PDTS-BTD:PC71BM and the considerable energetic disorder present in the material.
![Page 85: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/85.jpg)
85
This is established by the delay time dependent photo-CELIV mobility in DTS-
BTD:PC71BM and the larger value of the disorder parameter compared with
P3HT:PC71BM.
![Page 86: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/86.jpg)
86
CHAPTER 5 INTERFACIAL ENGINEERING
5.1 Abstract
As a typical excitonic cell, bulk heterojunction polymer solar cells are able display
photovoltaic effect even without built-in potential. The ultra-fast charge generation
across the donor-acceptor interface enables the splitting of quasi-fermi level of electron
and holes entirely upon chemical potential gradient. This unique photovoltaic
mechanism is quite different from those in traditional inorganic cells wherein charge
generation occurs in the same material phase. However, since the charge generation
and recombination both happen at the polymer-fullerene interface, they become the
determining factors to the performance in polymer solar cells. In addition, efficient
charge extraction and collection rely on maximized built-in potential which is realized by
making Ohmic contact with the polymer and fullerene phases. As a result, significant
progress in power conversion efficiencies and stabilities of polymer solar cells has been
achieved using semiconducting metal oxides as charge extraction interlayers. Both n-
and p-type transition metal oxides with good transparency in the visible as well as
infrared region make good Ohmic contacts to both donors and acceptors in polymer
bulk heterojunction solar cells. Their compatibility with roll-to-roll processing makes
them attractive for low cost manufacturing of polymer solar cells. In this chapter, we will
present the recent results on some of these metal oxides along with the device
performance of the solar cells using metal oxides as charge collection interlayers.
5.2 Introduction
The power conversion efficiency of PSCs has been driven by the development of
photoactive materials28, 115 and device architectures59, 116-118. In particular, variant
![Page 87: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/87.jpg)
87
polymers with donor-acceptor building block have been synthesized to control the
highest molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO)
energy levels. Such bandgap engineering allows many low bandgap polymers to reach
low-lying HOMO energies, resulting in enhancements in short circuit currents (Jsc) as
well as open circuit voltages (Voc) which are the two key parameters for photovoltaic
cells. Using these polymers, PCEs of 7~9% have already been demonstrated along with
the interlayer materials,29, 31, 32, 119-122 among which transition metal oxides become
attractive because of their capability of efficient charge extraction and their compatibility
with roll-to-roll (R2R) processing.123, 124 While solution processed electron extraction
materials such as zinc oxide have been successfully used in both small area devices or
scaled-up modules, further development of solution processed high work function metal
oxides is still needed.
Most PSCs apply the bulk heterojunctions (BHJs) structure125 wherein an electron
donating polymer and an electron accepting fullerene derivative form nano-scaled
interpenetrating networks allowing efficient exciton dissociation and carrier transport.
Although the photovoltaic effect of an excitonic cell does not entirely rely on the built-in
potential established under thermal equilibrium, a good solar cell performance still
requires the Ohmic contact between the absorber and electrodes. Unlike inorganic solar
cells, where Ohmic contacts can be formed via surface doping, PCSs need alternative
methods to reduce carrier injection/extraction barrier. In general, poor Ohmic contacts
between the organic layer and electrodes are due to the mismatch of work function,126,
127 the interfacial dipoles128-130 and a large number of trap states131, 132. Among the
electrode interlayer materials used in high efficiency PSCs, transition metal oxides are
![Page 88: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/88.jpg)
88
very successful owing to their better environmental stability, higher optical transparency
and easier synthesis routes with compared with alkali metal compounds,133-136 aqueous
conducting polymers137-140 and conjugated polyelectrolytes120, 141.
The PCE of PSCs is a product of Jsc, Voc and fill factor (FF). Jsc is determined by
the light absorption and the charge collection under large extraction fields, Voc is limited
by intensive recombination as well as the energy band alignment between the
photoactive polymer donor and the fullerene acceptor, FF is affected by the series/
shunt resistance and the charge recombination/ extraction rate under low internal fields.
The n- and p-type semiconductivities in metal oxides are in general due to the intrinsic
point defects such as atomic vacancies present in the oxides. Figure 5-1 shows the
HOMO as well as LUMO energy levels of some of the state-of-the-art photovoltaic
polymers, fullerene derivatives and the electron affinities and ionization potentials of
high/low work function metal oxides.142 These metal oxides form Ohmic contacts to
photovoltaic polymers and fullerenes through favorable vacuum level shift, energy level
bending and Fermi level pinning at thhe polymer/electrode interfaces. In addition, the
use of oxide interlayers circumvents the direct contact between photoactive polymer
and electrodes where high densities of carrier traps or unfavorable interface dipoles
hinder efficient charge collection. Making Ohmic contacts is equally important to Voc
because the reduction of built-in potential by direct contact between the photoactive
polymer and the electrodes leads to a decrease of quasi-fermi level splitting as well as
an increase of carrier recombination.
![Page 89: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/89.jpg)
89
Figure 5-1. (color) Energy diagrams of state-of-art photovoltaic polymers and transition metal oxides that are commonly used for interfacial engineering
5.2.1 Zinc Oxide (ZnO)
ZnO is superior as an electron transporting layer (ETL) materials in PSCs. The
Fermi level at 3.7~4.3 eV119, 143 makes it a perfect match with TCO and the lowest
unoccupied molecular orbital (LUMO) of [6,6]-phenyl-C61(/71) butyric acid methyl ester
(PC61/71BM)—so far the most effective electron accepting materials when blended with
photovoltaic polymers. The ionization potential of ZnO (~7 eV) is enough to serve as an
excellent hole blocker to suppress hole transport across the cathode region and
therefore to increase the shunt of the BHJ diode. Optically, the absorption band of
fullerenes and photoactive polymers, usually ranging from blue to near infrared region,
are just able to locate within the long-pass window defined by the band gap of ZnO and
thus get protected from ultraviolet (UV) illumination. In contrast to the deposition
techniques used in other thin film solar technologies, the ZnO used for PSCs is aimed to
![Page 90: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/90.jpg)
90
solution process at low temperature and ambient condition. With such requirements,
some earlier developed ZnO nanomateirals such as colloidal nanoparticles and sol-gel
ZnO films were consequentially incorporated in PSC fabrication.
For practical purpose, the most attractive feature of NPs is that it allows the
material to be utilized in crystalline phase, although at nano-scale, without the
requirements of vacuum, high temperature annealing or prolonged fabrication time. ZnO
NPs have such advantages to fit roll-to-roll (R2R) technologies as it has already been
demonstrated by modified slot die coating124 for large area BHJ cells fabrication. For the
lab-scale device fabrication, ZnO NPs are usually deposited through spin-coating as a
bottom or top interlayer depending on the device geometry.
Figure 5-2. (color) Transmission electron microscopic images of ZnO colloidal nanoparticles with a scale of A) 5 nm and B) 50 nm.
ZnO NPs are readily synthesized from zinc acetate dihydrate in alcoholic solvent
with either of the following strong base—sodium hydroxide (NaOH)144, potassium
hydroxide (KOH)145-147 or tetramethylammonium hydroxide (TMAH)119, 148. The synthetic
wurtzite-type ZnO NPs have diameters of 3~6nm, band gap 3.3~3.6eV and form
![Page 91: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/91.jpg)
91
transparent colloids in polar or non-polar solvent119, 144-148. Figure 5-2 (a) and (b) show
the TEM images with the scale bar of 5nm and 50 nm repectively. The XRD features
are also shown in Figure 5-3.
Figure 5-3. (color) X-ray diffraction of ZnO nanoparticles. The pattern reveals the wurtzite structure.
5.2.2 Molybdenum Oxide (MoO3)
The application of MoO3 started with the exploration of efficient hole injecting
materials for light emitting organic semiconductors with deep HOMO levels149. Owning
to the low melting point temperature (795 oC), molybdenum oxide can be deposited
through thermal evaporation which allows accurate thickness control at nanometer
scale. Due to the well-known hole injecting capabilities, MoO3 was once misidentified as
a p-type semiconductor until the n-type characteristics were directly proved by
ultraviolet/ inverse photoelectron spectroscopy (UPS/IPES)150. Similar to TiOx, the d
band of MoO3 remains unoccupied and contributes to the conduction band of the oxide.
![Page 92: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/92.jpg)
92
Evident by XPS and UPS measurements, oxygen deficiency in e-MoO3 gives rise to the
defect band which lifts the Fermi energy closer to the conduction band151, 152. Like other
n-type oxides, e-MoO3 forms Ohmic contact with ITO through efficient electron transfer
with the substrate. According to the UPS spectra, upon the deposition of MoO3 onto the
ITO substrate, the interface experiences a significant vacuum level shift of 2 eV which
aligns the Fermi level of MoO3 and ITO. Summarized from few independent in itu
measurements carried out under ultra high vacuum (UHV, <10-10 Torr), the work
function of evaporated MoO3 locates at 6.7±0.2 eV below the vacuum level, with a
separation of 0.5±0.2 eV and 2.7±0.2 eV to its conduction band and valance band
respectively150, 152-155. Some further study reveals that the work function of MoO3
exhibits strong dependence on the stoichiometry and surface contamination. With
oxygen or air exposure, the work function decreases dramatically to 5.3~5.7 eV154-156
which is still enough to keep the hole injection capability uncompromised154. Further
reduction of the suboxide contributes to the significant extension gap states towards the
Fermi energy, eventually resulting in the metallic behavior of MoO2157.
The mechanism of Fermi level pinning between a high work function oxide, such
as MoO3, and organics has been intensively studied using UPS. It was reported that the
HOMO level of aluminum phthalocyanine chloride (AlPcCl) shifts by 1.6 eV within a
thickness of few nanometers, leading to an energy level bending on the organic side of
the interface. Similar HOMO level change is also directly confirmed by studying the
N,N’-diphenyl-N,N’-bis(1-naphthyl)-1,1’-biphenyl-4,4’-diamine (α-NPD)/ MoO3
interface152, 158. Such energy level bending is caused by strong electron transfer from
the HOMO levels of organic materials to the 4d band of Mo, which results in a Fermi
![Page 93: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/93.jpg)
93
level pinning within a depletion region as thin as few nanometers. The guiding rule of
forming Fermi level pinning and Ohmic contact can be well explained by
thermodynamics that, regardless to n-type or p-type oxides, given their work functions
are higher than HOMO levels of adsorbed organic materials, the HOMO offset, which is
defined as the difference between the HOMO levels and Fermi energy after equilibrium,
will approach to a fixed minimum value which indicates the formation of Fermi level
pinning 159.
5.2.3 The Inverted Device Geometry
As mentioned earlier, in organic electronic devices, Ohmic contacts are made by
matching the electrode Fermi level to the HOMO or LUMO levels of the organic layer.
Such requirement does not affect the selection of anode materials since the HOMOs of
most common organic electronic materials have a larger any than the “oxidization
threshold” (5.2 eV) by the oxygen in ambient, which means anode materials are
generally stable in the air. However, the cathode materials are prone to oxidization
because of their low work function. In particular, alkali metals based top electrodes are
known for very fast degradation in ambient. Even with a work function larger than 4.2
eV, aluminum still cannot be used as a top electrode in the roll-to-roll printing process
which cannot be conducted in vacuum. Silver paste is a good candidate for the top
electrode materials, but its work function is too low to serve as a cathode. Those TCO
with relatively low work functions cannot be directly sputtered organic materials due to
the softness of the functional organic layer as well as the requirement of excluding
vacuum deposition. As a result, instead of using a top-cathode-bottom-anode structure
which is referred as the standard or normal device structure, an inverted structure with a
top anode and a bottom cathode has becomes prototypical for not only the small area
![Page 94: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/94.jpg)
94
device demonstration but also the module production in industry. As shown in Figure 5-
4, the top electrode of an inverted cell can be deposited by printing silver paste. The
bottom TCO, with a relatively low work function, will not affect the roll-to-roll process in
ambient because it is sputtered or coated before the coating the whole organic stack.
Some nanocrystalline, solution processed metal oxides can further more modify the
bottom cathode work function, resulting in better solar cell performance.
Figure 5-4. (color) The illustration of normal A) and inverted B) structure for polymer solar cells.
The HOMO levels of high efficiency photovoltaic polymers generally resides
between -5.2 eV and -5.6 eV by considering the trade-off relationship between Voc and
optical absorption band160. According to the criteria of forming Ohmic contact between
metal oxides and organic materials, as summarized in Table 5-1, MoO3 can be applied
to almost all the advanced photovoltaic polymers that have shown promising PCE
values. Furthermore, some injection studies revealed that using sequentially evaporated
MoO3 and silver as a top electrode exhibits even better Ohmic contact than that directly
deposited on the bottom transparent conducting substrate161. This makes the inverted
device architecture, wherein MoO3 as a top anode interlayer, one of the prototypical
structures for the lab-scale device demonstration. The P3HT:PC71BM cells fabricated
![Page 95: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/95.jpg)
95
using such inverted structure are reported with PCEs 4.5~5%58, 162, consistently higher
than the traditional structure using PEDOT:PSS and low function metals as electrodes.
The results of higher efficiency cells will be presented in the section of result
discussions.
In this chapter, I will discuss the synthesis and characterization of some of the
vacuum-deposited and solution processed metal oxides including zinc oxide,
molybdenum oxide, for interlayers in PSCs. I will also describe how their intrinsic
defects affect the performance of some of the state-of-the-art PSCs.
5.3 Experimental
ZnO NPs were synthesized using the zinc acetate dehydrate and
tetramethylammonium hydroxide (TMAH) as precursors. They were used as received
from Sigma-Aldrich. The details of synthesis and microscopic characterization were also
included in earlier publications163, 164. Before devices fabrication, the ITO coated glass
substrates were cleaned by acetone, isopropyl alcohol and DI water. ZnO NPs were
spin coated onto cleaned ITO substrates at 8000 rpm to reach a 25±3 nm film. The
ZnO film was placed under UV lamp which emits at 254nm for 10 min. The PDTG-TPD:
PC71BM (1:1.5) blend was dissolved in chlorobenzene (CB) with 5% 1,8-diiodoctane
(DIO) in volume. The PDTG-TPD:PC71BM solution has a concentration of 20mg/ml and
was spin coated onto ZnO film to reach an optimum thickness around 105 nm. Then the
film was annealed at 80oC for 30 min. 5 nm thick Molybdenum Oxide (MoO3) and
100nm silver was thermally evaporated under the vacuum of 1×10-6 Torr. PerkinElmer
LS55 fluorescence spectrometer and Lambda 750 UV/VIS spectrometer was used for
photoluminescence and absorption experiments. The transient photo-current setup was
![Page 96: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/96.jpg)
96
composed of a Tekstronix TPS2024 oscilloscope, a DTL-319QT pulse laser source from
LASER-EXPORT Co. Ltd (532nm, 8ns time width), a Stanford research system (SRS)
DG535 delay generator and an ORIEL Xe DC arc lamp for light-biasing. Similar
experiment has been published with detailed experiment process165. Devices were
encapsulated before measurements. Photo-current-voltage (J-V) characterization was
done with a Keithley 4200 semiconductor characterization system and a Newport
Thermal Oriel 94021 1000W solar simulator (4 in. by 4 in. beam size). The light intensity
was determined by an ORIEL 91150V monosilicon reference cell calibrated by Newport
Corporation. EQE measurement was conducted using a Xe DC arc lamp as light
source, an ORIEL 74125 monochromator, a Keithley 428 current amplifier, an SR 540
chopper system and an SR830 DSP lock-in amplifier from SRS. The generated EQE
spectrum was integrated with A.M. 1.5 G spectrum to compare with the measured short
circuit current value.
5.4 Results and Discussions
5.4.1 Inverted Polymer Solar Cells
With the demand of demonstrating PSCs with higher efficiencies as well as the
competitive strength as a candidate for the next generation thin film solar cells, recently
reported advanced photovoltaic polymers not only feature the extension of absorption
band, but also maximization open circuit voltages by tuning the energy levels of HOMO.
Here, we first introduce a novel donor-acceptor block copolymer containing
dithienogermole (DTG) and 1,3-dibromo-N-octyl-thienoporrolodione (TPD). The polymer
was synthesized and characterized by the SoRey joint group.
![Page 97: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/97.jpg)
97
Figure 5-5. The monomer structure of PDTG-TPD and PDTS-TPD.
As shown in Figure 5-5, the dithienogermole unit has a germanium atom in the
bridging position as in contrast with the previously reported dithienosilole (DTS) unit
which referred in the following part of the section. The thienoporrolodione unit was
chosen to couple with DTG because several groups reported that this strong electron
accepting unit can result in high open circuit voltages. The comonomers were
polymerized using the Pd2dba3/P(o-tol)3 catalyst system, and resulted in number
average (Mn) molecular weights of 31kDa (PDI 1.7) for PDTS-TPD and 48kDa (PDI 1.7)
for PDTG-TPD. Figure 5-6 illustrate the UV-visible spectra of pristine polymers films
coated on quartz substrates. PDTS-TPD shows an excitonic absorption peak at 670 nm,
corresponding to an optical bandgap around 1.73eV, consistent with previous reports.
Upon substitution of the silicon atom for germanium in PDTG-TPD, a red-shifted
absorption spectrum was observed with respect to PDTS-TPD, with the excitonic peak
at 679 nm and an optical bandgap of 1.69 eV. Electrical chemical measurements reveal
the HOMO level at 5.60 eV for PDTG-TPD, 50 meV smaller than the silicone
counterpart.
![Page 98: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/98.jpg)
98
Figure 5-6. (color) The absorption of PDTG-TPD and PDTS-TPD measured in solution phase.
Inverted solar cells were fabricated using PDTS-TPD: PC71BM and PDTG-
TPD:PC71BM as active layers in inverted device architectures: ITO/ZnO
(NPs)/polymer:PC71BM/MoO3/Ag. Figure 5-7 shows J-V curves of both polymers under
A.M. 1.5G illumination, with and without diiodooctane (DIO) as a processing additive.
The short circuit currents and fill factors of both cells are greatly enhanced by adding 5
vol% DIO into the polymer:PC71BM solution. Upon optimization, PDTS-TPD reached an
average short-circuit current density of 11.5mA/cm2, an open circuit voltage of 0.89V,
and a fill factor of 65%, resulting in an average power conversion efficiency of 6.6%.
The performance is slightly lower than the earlier reported devices made from a regular
structure. The DTG-containing polymer PDTG-TPD displayed a higher short-circuit
current density (12.6mA/cm2) and fill factor (68%) than PDTS-TPD, despite of a lower
![Page 99: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/99.jpg)
99
Voc of 0.85V, for an average PCE of 7.3%. The lower Voc of 40mVfor PDTG-TPD is in
good agreement with the above mentioned electrical chemical measurements.
Figure 5-7. (color) The J-V characteristics measured under A.M. 1.5G condition.
The external quantum efficiency (EQE) spectra of the devices are shown in Figure
5-8, and it can be seen that without DIO both devices display fairly low quantum
efficiency. With DIO as a solvent additive, the photo-response of both PSCs increases
significantly. The EQE values of PDTG-TPD ranges from 55 to 65% within the
absorption band of the polymer, while that of PDTS-TPD ranges from 50 to 56%, with
PDTG-TPD showing an onset at a longer wavelength. This is consistent with the slightly
red-shifted absorption spectrum of PDTG-TPD with respect to PDTS-TPD. The 7.3%
PCE demonstrated here was the highest record value of the PCSs using any inverted
device structure, and is still among the highest values for the single junction PSCs ever
reported. Some better device performance due to further optimization of ZnO layer will
be shown in the next section.
![Page 100: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/100.jpg)
100
Figure 5-8. (color) The external quantum efficiency (EQE) for the same devices in Figure 5-7.
5.4.2 Inverted Cells with Reduced Interface Recombination
In inverted polymer solar cells, solution processed ZnO is widely used in the form
of nanoparticles123, 146, 162, 166. ZnO NPs, usually have diameters less than 10nm, are
known to have a large density of point defects. It has been shown that almost 30% of
the atomic bonds in one ZnO nanoparticle are dangling bonds167. When using ZnO to
make solar cells, a common and easy way to address defects issue is to light soak168
the device for a period of time after the device fabrication. During this process, incident
photons excite photo-carriers to fill the mid-gap states of ZnO NPs and electrons in the
conduction band will be able to transport through the ZnO NPs without getting
recombined in the mid-gap states, which explains why Jsc, Voc and FF increase upon
soaking. For inorganic thin film solar cells, it was also found that when ZnO serves as
buffer layer, strong light soaking effect was observed169, 170. However, these defects are
not eliminated during illumination because the photo-carriers that occupy the mid-gap
![Page 101: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/101.jpg)
101
states will finally recombine or relax into valance band, leaving mid-gap states once
again unoccupied.
Knowing that light soaking cannot completely passivate the defect states, UV
ozone treatment was done on the ZnO NPs films. ZnO NPs were spin coated on ITO
substrates, subsequently annealed to remove the solvent from the films. ZnO NPs films
were then exposed to a UV lamp (254 nm emission, 50W) before the deposition of the
polymer: PC71BM film. In order to confirm the passivation effect by UVO treatment,
photoluminescence experiments were carried out to characterize the ZnO NPs films. As
shown in Figure 5-9, the as-annealed film shows an emission band peaked at 372 nm
which is indicative of band edge emission. Upon UVO treatment this band edge
emission increases slightly. In addition to band edge emission, we observed a strong
broadband emission with a maximum at 519 nm for untreated films. This broadband
emission has been reported as an evidence of the presence of defect states due to
oxygen vacancies171, 172, zinc vacancies172, 173 and interstitials. Estimated from the
spectra integration, photo-excited electrons have more chance to fall into mid-gap
states than a direct band-to-band transition. Upon a UVO treatment, the defects
emission almost disappears while the band edge emission is enhanced. When the
defect population decreases, the band-to-band transition becomes dominant. It should
be noted that the UVO treatment is not just a surface treatment, it also passivates the
defects in the bulk as PL emission is a bulk effect. Moreover, the PL data helps to
distinguish the defects passivation effect from previously discussed light soaking. In the
PL measurements, the excitation source actually soaks the ZnO films with UV during
the 2 minutes scanning time which is much longer than the 1~2 seconds required for
![Page 102: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/102.jpg)
102
midgap states filling. According to the resultant PL spectrum, however, these “as
prepared” ZnO still show significant defects emission, indicating light soaking cannot
completely fill the defect states. In contrast, the defect passivation by UVO treatment
results in a change in material structure and energy band structures instead of a
temporal defect states filling. Based on the PL study, we propose the defects
passivation in ZnO NPs films will help to reduce interface recombination between the
ZnO and photoactive layer which contributes to a photocurrent loss in the inverted PSC
we shown in the last section. The correlation between interface recombination and
defects is well known in the case of inorganic thin film photovoltaics. For copper indium
gallium (di)selenide (CIGS) solar cells, the recombination at the ZnO surface can be
greatly reduced by inserting a CdS buffer layer between the CIGS and the ZnO
layers174.
Figure 5-9. (color) The photoluminescence of ZnO nanoparticles films with and without UVO treatment.
To finish the fabrication of inverted solar cells, both PDTG-TPD and PDTS-TPD
were mixed with PC71BM as the photoactive layer. Here, the optimal blending ratios—
for both polymer: PC71BM blends are 1:1.5 in weight. The optimum composition ratio
![Page 103: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/103.jpg)
103
principally gives a balanced transport of electrons and holes92. In addition, similar to the
presentation in the last section, 5% (volume) solvent additive—1,8-diiodoctane (DIO) is
required to fully dissolve the PC71BM in chlorobenzene (CB) in the presence of PDTG-
TPD or PDTS-TPD. Fully dispersed PC71BM is of great importance to the blend
morphology since aggregates of PC71BM generates over-sized domains which inhibit
exciton dissociation and carrier transport175. The current density-voltage (J-V) curves of
PDTG-TPD: PC71BM and PDTS-TPD: PC71BM solar cells J-V curves are shown in
Figure 5-10 and 5-11. Upon treating the ZnO layer with UVO, both solar cells
demonstrate a 10% enhancement of Jsc. The device characteristics of these cells are
shown in Table 5-1. As shown in the table, the controlled PDTG-TPD:PC71BM cells
gives a short circuit current of 12.9 mA/cm2 while the devices with UVO-treated ZnO
NPs film have an average value of 14.1 mA/cm2. The FFs are increased in both PDTG-
TPD and PDTS-TPD devices, indicating the passivation of ZnO NPs enhances charge
collection even at very low extraction fields for both material systems. VOC was
observed as unchanged, indicating that there is no change in interface energetics. The
EQE data in Figure 5-10 confirms the enhancement of photo-current. As shown the
data, a maximum EQE of 72% percent is very high for inverted polymer solar cells.
Integrating the EQE spectrum with A.M. 1.5G spectrum gives a current of 14.0 mA/cm2
for the PDTG-TPD: PC71BM cell. The integrated photocurrent is within 2% of the direct
measured value of Jsc. In addition, the PDTG-TPD is the first reported polymer giving a
PCE over 8%. For PDTS-TPD:PC71BM cells, we obtained an average 7.8% PCE after
UVO treatment of ZnO NPs films, this is even higher than previously reported best
devices in conventional structure31.
![Page 104: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/104.jpg)
104
Figure 5-10. (color) The J-V (A.M. 1.5G) and EQE spectrum of inverted PDTG-TPD:PC71BM cells.
Figure 5-11. (color) The J-V (A.M. 1.5G) and EQE spectrum of inverted PDTS-TPD:PC71BM cells.
As an important part of the work in this chapter, I made PDTG-TPD:PC71BM
devices for the power conversion efficiency certification (Newport Calibration Cert.
#0341) carried out in the TAC-PV lab of Newport Inc. Due to some encapsulation
problems, the certification results averaged at 7.4%, which was lower than the
laboratory measured values. When this chapter is being drafted, however, the 7.4%
efficiency is still recognized as the highest value of inverted polymer solar cells ever
reported on an academic journal.
![Page 105: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/105.jpg)
105
Table 5-1. Summary of device performance
Polymer Jsc (mA/cm2) Voc (V) FF (%) Average PCE (%)
PDTG-TPD 12.8/14.1 0.86/0.86 66.8/67.3 7.4/8.1 PDTS-TPD 11.4/13.1 0.90/0.90 64.8/66.5 6.6/7.8
Figure 5-12. (color) The certification from Newport PV lab. The device was made by Song Chen.
It can be seen from the EQE spectrum and J-V curves, without the defect
passivation on ZnO, the devices exhibit a photo-current loss about 10% of the Jsc value
~ 1.3mA/cm2. Such a difference should be reflected in the photo-carrier lifetime
measured under short circuit condition57. In order to see the difference of
recombination, transient photo-current measurements were done on devices with and
without UVO treatment. To carry out these measurements, the active layer of the device
is excited with a pulsed laser with an emission wavelength at 527 nm with an intensity of
~1 nJ/pulse while the sample is also under light biased from a solar simulator. It should
be noted that the 527 nm excitation does not excite the ZnO NPs and the
![Page 106: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/106.jpg)
106
photoexcitation is primarily due to the polymer blends. The photocurrent transient was
measured with a 30 Ω resistor connected in series with the solar cell, simulating the
short circuit condition. The single exponential decay of the transient photo-current as
shown in Figure 5-13 is the result of laser pulse generated carriers recombining either in
the bulk or at the interfaces. According to the decay of photocurrent perturbation, the
photo-carriers lifetime is around 130ns and 210ns for devices “as prepared” and “UVO
treated” ZnO NPs films respectively, which is much shorter than the results measured
with high level excitation by which the photocurrent decay mainly characterizes the
carrier extraction processes and thus deviates from the single exponential dependence.
Considering the difference of carrier lifetime, we noticed all the devices have the same
photo-active layer and p-contact. Therefore, the difference in carrier lifetime can only be
attributed to the interface recombination at the ZnO/photo-active layer. Although
recombination also happens in the bulk materials, it is unlikely to overwhelm since the
carriers concentration is much lower at short circuit condition than open circuit
condition35. Thus, the carrier concentration decay due to bulk recombination is
supposed to exhibit a much longer lifetime. The physical picture of defects induced loss
mechanism can be explained as: one side, the electron-hole pairs dissociated at the
polymer-fullerene interfaces experience bimolecular recombination when they are in
contact with ZnO; the other side, the heterojunction formed between polymers and ZnO
has poorer exciton dissociation with the existence of a high defect density. With the
transient photocurrent measurement, we conclude that defects are passivated by UVO
treatment resulting in an increase in carrier lifetime.
![Page 107: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/107.jpg)
107
Figure 5-13. (color) The carrier recombination measured by transient photocurrent (small signal mode).
In order to confirm the enhancement of photocurrent is not caused by the change
in work function of the ZnO NPs layer after UVO treatment, we studied the change in
build-in potential by electroabsorption (EA)73, 176 on ZnO NPs/ polymer/ Al devices with
and without UVO treatment. The purpose of using this device structure instead of the
actual PV devices for the EA measurements is to suppress carrier injection under flat
band condition, thus maintaining a uniform field distribution across the polymer layer
during the EA measurements. Figure 5-14 shows that the first harmonic EA signals vary
linearly with the applied voltage bias until the internal field reaches zero. The flat band
condition is reached when the DC bias compensates the built-in potential (Vbi) which is
determined by the work function difference between the ZnO NPs layer and the Al
electrode. With UVO treatment on the ZnO NPs, as shown in Figure 5-14, the built-in
potential of the ZnO NPs/ polymer/ Al device only changes from 0.55 eV to 0.51 eV,
indicating a 0.04 eV increase of work function on the ZnO NPs. This small change of
![Page 108: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/108.jpg)
108
work function is not favorable for electron extraction and thus cannot be the reason for
the Jsc enhancement.
Figure 5-14. (color) The DC dependent electroabsorption 1st harmonic signals.
As already shown, the effect of UV treatment works on the two deep HOMO
polymer—PDTG-TPD and PDTS-TPD. In order to better understand the physical
processes due to the UV treatment, we applied the same UVO treatments to inverted
P3HT:PC71BM cells and MDMO-PPV: PC71BM cells. Unlike the positive effect when
using PDTG-TPD and PDTS-TPD, we see significant reduction in VOC and FF,
suggesting significant surface properties change on polymers after UVO treatments177.
For polymers with shallow HOMO energies like P3HT and MDMO-PPV, the excess
oxygen present at the ZnO surface due to the UVO treatments not only helps to repair
the surface defects but also tends to oxidize the polymers. But extra oxygen may also
be adsorbed on the ZnO NPs surfaces, when they make the contact with polymer films,
![Page 109: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/109.jpg)
109
surface oxidization is possible. Therefore, we see UVO treatment significantly reduces
the VOC and FF. According to the HOMO levels of these polymers, the threshold of
oxidization level should be between -5.4eV and 5.6eV.
To sum up this section, we presented a simple processing method to enhance the
PDTG-TPD:PC71BM cells from 7.4% to 8.1%. The defects passivation mechanism is
confirmed by PL spectrum and transient photo-current decay. The same effect was
seen on PDTS-TPD:PC71BM, but not on shallow HOMO polymer :PC71BM system such
as P3HT and MDMO-PPV. The EQE for the optimum cell is as high as 72%, indicating
the PDTG-TPD is a promising polymer for photovoltaic application and UVO treatment
on ZnO NPs films can significantly enhance the device performance.
5.4.3 Device Stability
In the previous section, we discussed the mechanisms of PCE improvement in the
inverted PDTG-TPD:PC71BM and PDTS-TPD:PC71BM cells. The efficiency values are
very encouraging for such a device structure that is compatible with large scale printing
process. However, the other side of the device performance—stability is yet
characterized. It would be interesting to learn if the organic photo-active absorber, which
is sandwiched between two metal oxide layers, can perform still perform well after a
very long storage time.
Figure 5-15 shows a J-V curve of a 15 months-aged PDTG-TPD cell which owned
a PCE of 8.1% right after device fabrication. As it can be seen, with a simple
encapsulation using cavity glass, getter and epoxy, the PCE maintains 89% of the
original efficiency after more than one year. This is strong evidence showing the great
device stability of our inverted polymer solar cells.
![Page 110: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/110.jpg)
110
Figure 5-15. The J-V of a PDTG-TPD:PC71BM cell made in June 6th, 2011 and re-
measured in August 29th, 2012. The original PCE is 8.1%.
5.5 Summary
In this chapter, we first review the importance of interfacial engineering of polymer
solar cells from the perspectives of device physics and materials science. These metal
oxides have unique advantages when serving as charge extraction interlayers in PSCs.
The combination of ZnO, MoO3 is a good example that both anode and cathode
interface benefit from the efficient charge collection through these metal oxides. Using
such a strategy, we fabricated inverted PSCs using PDTG-TPD—a novel
dithienogermole-containing D-A polymer. Devices show a preliminary PCE of 7.3%.
With further improvement of ZnO layer, we are able to reduce the recombination at the
cathode interlayer region and thus enable an additional efficiency enhancement. The
optimum performance is up to 8.1%, which is not only a record value for inverted
polymer solar cells, but also remains a value of 7.2% after a storage time of 15 months.
![Page 111: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/111.jpg)
111
CHAPTER 6 OPEN CIRCUIT VOLTAGE LOSS
6.1 Abstract
In polymer bulk heterojunction (BHJ) photovoltaic (PV) cells, it is generally found
that the open-circuit voltages (VOCs) are strongly dependent on the energetic alignment
at the junction of the electron donors and electron acceptors. However, it has been a
challenge to directly measure the energetic alignment at the bulk heterojunction of an
actual device and that severely limits our understanding of the origin of the VOC loss. In
this work, we demonstrate that the bulk heterojunction alignment can be directly
measured using charge modulated electroabsorption spectroscopy (CMEAS) technique.
Above a sub-bandgap optical pumping energy, organic molecules are excited to the
higher levels of charge transfer (CT) states through which ultra-fast exciton dissociation
occurs subsequently at the polymer-fullerene interface. These separated electron-hole
pairs are also active enough to couple with the modulation electrical field and introduce
subtle changes in the in the sub-bandgap region of the absorption spectrum. Using
CMEAS, we directly measured the effective bandgaps of a series of high efficiency
polymer:fullerene systems. We also sought to investigate the loss of open circuit
voltages by combining the effective bandgap with recombination study. In contrast to
the previous findings that the VOC varies linearly with the polymer effective bandgap, we
found that the deviation from linearity is due to the coulombic nature of the Frenkel
excitons in the bulk heterojunction system with lower dielectric constants. The
coulombic loss is further confirmed by the temperature-dependent measurement of
open circuit voltages.
![Page 112: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/112.jpg)
112
6.2 Introduction
6.2.1 Effective Bandgap
Polymer solar cells with power conversion efficiencies (PCEs) over 8% have been
demonstrated in laboratories with the advance of novel materials, film processes, and
device architectures119, 120, 122, 178, however, many arguments regarding the
polymer:fullerene bulk heterojunction (BHJ), such as the charge transfer process and
the energy alignment, still remain to be further studied. Typically, a BHJ photoactive
layer is formed by blending an electron-donating polymer and an electron-accepting
fullerene derivative, the energy alignment between these two phases directly impacts
the performance of polymer solar cells. For example, the open-circuit voltage (VOC) in
organic PV cells is related to the energy level difference of the highest-occupied-
molecular-orbital (HOMO) of the donor and the lowest-unoccupied-molecular orbital
(LUMO) of the acceptor160, 179. Therefore, making polymers with low-lying HOMO
energies is a common strategy to reach large VOCs. In addition, the LUMO energy offset
between polymer and fullerene is referred as the interfacial driving force to split the
excitons generated in the polymer. A minimum value such offset is still under debate.
Likewise, the HOMO offset helps to separate the excitons formed in the fullerene
domains. Based on these half-empirical, half experimental conclusions, an optimum
energy alignment was tentatively proposed for the ideal polymer to form the best
matchup with fullerenes. As a result, controlling such energy level alignment has been
the rule-of-thumb to manipulate the photovoltaic properties of a BHJ cell. Meanwhile, in
contrast to its significance to the framework of device physics, the understanding the
energy level alignment is limited by the lack of experimental techniques that can directly
measure the energy levels of the donor and acceptor phases in a BHJ PV device.
![Page 113: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/113.jpg)
113
Previous attempts to determine the energy level alignments in polymer BHJ
systems preliminary relied on the measurements of the pristine materials. However, the
HOMO or LUMO levels obtained by electrical chemistry methods were lack of accuracy
and repeatability, resulting in a very rough and inconsistent estimation of Eeffs in the
BHJ films. For a better study of energy alignments, the impact of polymer-fullerene
interaction has to be considered. First, the effective bandgap should be determined by
the sub-bandgap photo-excitation which includes the participation of those meta-stable
charge transfer states. In addition, upon the formation of polymer:fullerene
interpenetrating network, the electrostatic environment of either material is readily
altered by the modification of dielectric properties. Also, due to the difference of electron
affinities and intrinsic electron densities, the charge transfer between the polymer and
fullerene derivatives forms interface dipoles and results in further energy level shifts.
Last but not the least, a lot of polymers were reported with variant HOMO levels
because different reference electrodes were used in the electrical chemistry
measurements. Based on these electrical chemistry measurements, it has been shown
that the origin of VOC loss in polymer BHJ systems has been attributed to excitonic
effect179, 180, polaronic effect181 and the nonradiative recombination from charge-transfer
(CT) states which can be further incorporated in the classical relationship between the
VOC and reverse saturated dark current (J0) of a diode182. As an earlier attempt,
Scharber et al. reported that the VOCs of a series of BHJ PV devices followed a linear
relationship with the energy level difference of the polymer HOMO and fullerene LUMO
levels160, i.e.:
(6-1)
![Page 114: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/114.jpg)
114
Here, |ED-HOMO – EA-LUMO| was referred as Eeff of the donor/acceptor blend material
and 0.3 V is an arbitrary empirical constant value related to the VOC loss compensating
the forward-biased dark current. Similarly, the interface driving force of exciton
dissociation Edis is also estimated in such a way. Considering the success of the first
organic hetrojunction solar cell, people predicted a significant LUMO offset e.g. 0.3 eV
is required to counteract the exciton binding energy. While some later arguments
pointed out some efficient advanced donor-acceptor polymers don’t need such a high
effective force since the electron-hole wave functions are already fairly separated upon
the exciton generation in a repeating block. To address such a problem, an accurate
measurement of the energy alignment needs to be carried out. It is quite possible that
the polymer-fullerene interaction changes the energy alignment, resulting in a larger or
smaller effective force than what is predicted by the electrical chemistry methods.
Meanwhile, some recent efforts aiming at better probing technologies worth being
recognized. To date, the most direct way to measure the effective bandgap energy is
ultra-violet and inverse photoelectron spectroscopy (UPS/IPES). For example, Guan et
al. obtained an Eeff value of 1.4 eV for P3HT:PC61BM by UPS/IPES measurements183.
Ratcliff et al. also reported the PCDTBT:PC71BM system has an Eeff of 1.5 eV184.
UPS/IPES is an excellent tool to study small molecule systems where in-situ
measurements can be performed during the evolution of the bulk heterojunction,
however, it does not necessarily provide the accurate energetic information in the
solution processed films. The fact that the above cited Eeff values are much larger than
those estimated from electrical chemistry methods also raises questions whether the
inverse electron technology is sensitive enough to the meta-stable charge-transfer (CT)
![Page 115: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/115.jpg)
115
states and the tail states of LUMO levels. As can be seen, the physical process during a
UPS/IPES measurement is different with the optical pumping from a polymer’s HOMO
levels to PCBM’s LUMO band. In addition, as a typical surface-sensitive technique,
UPS/IPES doesn’t probe the energy alignment in the bulk materials. In addition to
UPS/IPES, several other techniques such as charge-transfer state
photoluminescence180 and electroluminescence185, 186 have been attempted to
determine the ground CT states (CT0). In these measurements, before the emission
occurs, excitons generally experience significant energy loss during the relaxation from
hot CT states to CT0. Thus, the sub-bandgap energies determined from CT0 emission
are supposed to be lower than the excitation energy from the polymer to the fullerene,
which is defined as Eeff. Here, we also point out that the low radiative signal from
photovoltaic materials may limit the applicability of this technique to donor-acceptor
systems.
In this work, we demonstrate a simple method—charge modulated
electroabsorption spectroscopy (CMEAS) technique to directly determine the actual
energy alignment in a polymer:fullerene BHJ blend. By combining the electroabsorption
(EA) technique and the charge-modulated (CM) optical absorption of polymers, we are
able to observe a clear sub-bandgap signal through direct excitation of electrons from
the HOMO level of the polymer donor to the LUMO level of the fullerene acceptor.
Above a sub-bandgap optical pumping energy, organic molecules are excited to the
higher levels of charge transfer states through which ultra-fast exciton dissociation
subsequently occurs at the polymer-fullerene interface. These photo-generated charges
are able to couple with the modulation electrical field and introduce subtle changes in
![Page 116: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/116.jpg)
116
the sub-bandgap region of the absorption spectrum. Such a differential spectrum
technique has a much higher detectivity than a direct absorption measurement,
generating more accurate results. Using CMEAS, we are able to directly probe the
actual effective bandgap and interface effective force of polymer:fullerene systems.
6.2.2 Recombination and Excitonic Loss
Most previous attempts to study the VOC loss simply attribute the to
recombination or polaron self-trapping without directly measuring the actual
recombination or polaronic loss energy. Using the derivation from a typical diode’s J-V
characteristics—
, the reverse saturation dark current becomes
another parameter that can be experimentally determined. In that equation, and
are the photocurrent and dark current at the open circuit condition. Nevertheless, the
direct measurement of this small current is highly affected by the leakage current and
the ideality factor larger than unity. Fortunately, recombination and reverse saturation
dark current can be connected using the Shockley-Queisser balance theory21 which
demonstrated the radiative recombination limit. Some further modification was also
presented.179, 187-189 As a progressive step, Vandewal et al. achieved more accurate
estimations of J0 and VOC by directly measuring the quantum yield of radiative
recombination from CT0 states.182
From section 6.1.1, we know an accurate measurement of effective bandgap is
important and challenging. With the CMEAS technique, it is possible to probe the
effective bandgap of variant polymer:fullerene systems by taking care of the contribution
of polymer-fullerene interaction and energetic disorder. The sub-bandgap signals in
CMEAS probe the onset of hot CT states. Although the signal is induced by the sub-
![Page 117: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/117.jpg)
117
bandgap optical pumping, the energy value extracted from CMEAS spectra is actually
electrical gap because the charges are separated through the higher manifolds of the
CT states. In addition, since Eeff is defined at the onset edge of the spectra, it already
includes the effect of energetic disorder. Thus we can tentatively express VOC in the
following way:
(6-2)
wherein is the hot CT energy without the consideration of energetic disorder which
is marked as . , with a negative value, characterizes the loss of quasi-
Fermi level splitting due to intensive bimolecular recombination. is the additional
energy loss happens after the charge transfer and until the so-called fully separated
state. Bimolecular recombination across the donor-acceptor interface determines the
carrier lifetime and carrier concentration (see Eq. 4-6) at open circuit conditions.56 It is
easy to estimate the voltage loss due to the recombination by assuming the carrier
concentration ~ 1016cm-3, Nc=Nv ~ 1019cm-3 and 1018cm-3 (roughly corresponding to 1020
cm-3eV-1 and 1019 cm-3eV-1) at the peak and tail position of the DOS respectively.77, 190
Then we get the value of -0.36 eV and -0.24 eV which respectively shows how much
quasi-Fermi level splitting decrease if we use the DOS peak or tail as the origin of the
energy coordinate. Their difference of 0.12 eV is close to the value of energetic disorder
in most photovoltaic polymers.58, 191 As we mentioned in Chapter 4, the carrier
concentration has the maximum value under open circuit condition. Even this value is
no more than the concentration of polymer domains, which means recombination is so
intensive that there’s very little chance to see two carriers exist simultaneously in one
![Page 118: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/118.jpg)
118
domain.56 The photo-voltage loss due to recombination contributes significantly to the
right side Eq. 6-2.
The voltage loss due to Ecs is less mentioned in previous reports. According to the
charge generation mechanism, the hole-electron across the donor-acceptor interface is
still loosely bounded although they are considered to be “separated”. Therefore, their
energy difference keeps decreasing due to the remained coulombic interaction until the
geminate pair is fully separated.179 Thus, the BHJ systems with lower dielectric
constants should show more pronounced excitonic/coulombic effect. Moreover, the
charge transfer process may play a role to the possible energy loss in this process. For
example, in a polymer:fullerene system wherein most charge transfer and separation
happen through the higher CT manifolds, which is also called “hot” CT states, the
separated charge has more chance to experience energy loss since their wavefunctions
are too delocalized for hopping transport. For typical inorganic solar cells, such as
amorphous silicon and chalcogenide cells, charge generation occurs without the
formation of exciton or charge transfer states. Thus the loss of VOC can be fully
explained by Shockley-Queisser limit plus surface recombination effect.33, 192 However,
due to the different charge generation process in excitonic cells,3 the loss mechanism of
VOC is expected to be different.
The terms on right side of Eq. 6-2 can either be directly measured or calculated
since VOC is measurable. Using CMEAS, Eeff can be accurately determined with the
consideration of energetic disorder ( ). TPV helps to extract the carrier
concentration under open circuit condition, which is used to further calculate the
recombination loss. Thus, if the value of is
![Page 119: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/119.jpg)
119
significantly larger than the measurement error, we can conclude the observation of
photo-voltage loss due to coulombic interaction. We also expect to see the energy loss
is dependent on the dielectric. Also, the magnitude of can be confirmed by doing
low temperature measurement of VOC, because recombination loss can be minimized at
low temperature. Measuring VOC with different light intentisy helps to determine the
saturation value of VOC on the VOC vs. temperature plot.
6.3 Experimental
Materials and device fabrication. PCDTBT and PC71BM were purchased from 1-
material and nano-c respectively. The PCDTBT:PC71BM solution has a concentration of
8mg ml-1, with a polymer-fullerene weight ratio of 1:4. 1,8-diiodooctane was used as a
processing additive into clorobenzene with a volume ratio of 3%. The sample has a
structure of ITO/ PCDTBT:PC71BM/ Al. The ITO substrate was cleaned using actone
and isoproponal followed by a 10 min UV-ozone treatement. The solution processed
film has a thickness ~ 200nm. 200nm aluminum was deposited as a top electrode using
thermal evaporation. The device has a size of 2 mm by 2.3 mm.
Electroabsorption measurement. The samples were kept in a cryostat with a
pressure of 10-3 Torr. The measurements were carried out at room temperature. A
monochromatic parrallel beam probes the sample through the ITO side with an incident
angle of 45o and gets reflected by the top electrode. Comparing with the absorption, the
reflection on the substrate surface is too low to be concerned. The back-reflected signal
got further absorbed by the organic layer before being collected by a calibrated silicone
detector which is further connected to a current amplifier and lock-in amplifier. A
calibrated germianium diode was also used to colllect the spectra from 1100 nm to 1500
nm, the data was not shown becasue no signal emerged. A DC voltage was used to
![Page 120: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/120.jpg)
120
bias the solar cell sample, a AC field was applied to modulate the lock-in amplifier to
allow a low-noise measurement.The final signal - T/T was simply the ratio of the signals
with and without AC field modulation.
Carrier concentration and dielectric constant measurement. The carrier
concentration is estimated using balance equation between carrier lifetime, generation
rate and carrier concentration. The carrier liftetime is extracted by TPV measurement.
The charge generation rate is obtained according to the photocurrent values obtained at
a large reverse bias. The dielectric constant of the sample is determeind by the
measurement of geometric capactance measrued under reverse bias.
6.4 Results and Discussions
6.4.1 Subgap Signals in EA Spectra
To demonstrate the measurement of Eeff, we pick a typical donor-acceptor
polymer—poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-
benzothiadiazole-4,7-diyl-2,5-thiophenediyl] (PCDTBT). Phenyl-C71-butyric-acid-methyl
ester (PC71BM) was used to form BHJs with PCDTBT. The details of device fabrication
are shown in the Experimental. EA measurements aim to probe the subtle change of
absorption coefficient with an electric field across the sample. A 1000 Hz AC modulation
field is used trigger the lock-in amplifier. Figure 6-1 shows the normalized EA spectra of
(a) pristine PCDTBT, (b) pristine PC71BM, and (c) the blend of PCDTBT:PC71BM. The
devices were under reverse bias to prevent carrier injection during measurements. As
shown in Fig. 1 (a), the EA spectrum of the pristine PCDTBT film is dominated by the
features ranging from 1.8ev to 2.5 eV where the exciton responds to electric fields with
a quadratic Stark effect due to the coupling between the excitonic level and higher
forbidden states69, 193, 194. The resulting line-shape similar but not identical to the first
![Page 121: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/121.jpg)
121
derivative of the unperturbed absorption spectrum as some structural ordering still
remains in the pristine PCDTBT film70, 195. Similarly, as shown in Fig. 1 (b), the excitonic
and vibronic signals of PC71BM are located between 1.7 eV and 2.4 eV. Nevertheless,
the signal amplitude of the PC71BM sample is over 10 times smaller than that from the
pristine PCDTBT sample when measured under the same field condition, which
explains why the EA spectrum of a PCDTBT:PC71BM sample in Fig. 1 (c) shows a very
similar excitonic feature to Fig. 1 (a) except a little blue shift and broadening of the main
peak. The broadening is related to the increased disorder with the increase of PC71BM
concentration195. In addition to the EA response from the pristine materials, we also
observed a signal emerging at an energy significantly lower than the bandgap energies
of both materials. The sub-bandgap signal in Fig. 1 (c) has an onset at 1.40 eV, while
the EA spectra onset of pristine PCDTBT and PC71BM is respectively 1.78 eV and 1.68
eV. Clearly, this is due to the interaction of the donor and acceptor materials.
Comparing to sub-bandgap features of PCDTBT:PC71BM observed by photo-induced
absorption (PIA)14, 196 and the CT electroluminescence186 measurements, the EA onset
(~1.40 eV) is energetically higher than both polaron features and CT0. The polaron
signals are broadly distributed from 0.8 eV to 1.5 eV with a maxima value continuously
relaxing from 1.2 eV to lower energies after photo-excitation14. According to the
electroluminescence spectra, the CT0 energy was determined at 1.15eV~1.20 eV186.
Therefore, it is reasonable to assume the sub-bandgap onset of EA spectrum
characterizes some higher energy levels due to the polymer-fullerene interaction—i.e.
“hot” CT states (CTn) which is recently attributed to the gateway for ultra-fast exciton
separation due to their relatively delocalized -electron wavefunctions19.
![Page 122: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/122.jpg)
122
Figure 6-1. (color) The normalized electroabsorption spectra of A) pristine PCDTBT, B) pristine PC71BM and C) PCDTBT:PC71BM devices. The dashed lines show the corresponding absorption spectra of the films studied.
We sought to investigate the origin of the sub-bandgap signals by comparing the
characteristics to the excitonic-transition signals. Fig. 3 shows the (a) modulating
frequency and (b) DC voltage bias dependences of the PCDTBT:PC71BM blend device
![Page 123: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/123.jpg)
123
with light biases at the sub-bandgap regime at 750 nm (1.65 eV) and the excitonic
regime at 620 nm (1.98 eV). Changing the modulation frequency, the excitonic-
transition signal at 620 nm remains the same level with a small fluctuation due to the
measurement noise, which is consistent with fact that the Stark effect occurs is an
instantaneous response to the modulation of internal electrical field. On the other hand,
the signal at 750 nm decreases with increasing the modulation frequency and finally
changes the phase at a frequency below 104 Hz, suggesting the sub-bandgap signal
has much slower response than the excitonic-transition signal. Although the details of
frequency response remain further studies, at this stage, we correlate it with the
coupling between electrical field and CT states which can be physically described as a
response of electric dipoles.
Figure 6-2. (color) Electroabsorption signal of A) frequency B) DC voltage dependences
of the PCDTBT:PC71BM device with optical excitation ex at 750 nm and 620 nm. The solid line in B) is a linear fit to the data. C) The AC voltage dependence of the EA signal with optical excitation at 750 nm.
![Page 124: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/124.jpg)
124
Figure 6-3. (color) Illustration of CMEAS mechanism. A) The energy diagram and the illustration of the sub-bandgap excitation. B) The free energy diagram of
CMEAS measurement. From “cooled” CT states to “hot” CT states, the -electron wavefunction gradually turns delocalized, allowing ultra-fast exciton dissociation to occur. Sub-bandgap CMEAS signal detects the carriers dissociated through “hot” CT states, the onset of CMEAS signal defines the transition from “cooled” to “hot” states, as well as the effective bandgap.
Furthermore, by varying the DC voltage bias, the excitonic signal shows the typical
first harmonic response of the Stark effect with the magnitude of the EA signal varies
linearly with the DC applied electric field197, resulting in a built-in potential of 0.9 V. In
contrast, the sub-bandgap signal is significantly less sensitive to the DC electric field,
indicating its origin is not from the Stark effect. Based on the above results, we
![Page 125: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/125.jpg)
125
postulate that the sub-bandgap EA signal comes from direct excitation of electrons from
the HOMO level of PCDTBT to the LUMO level of PC71BM as illustrated in Fig. 6-3 (a).
Using the free-energy state diagram of the BHJ system as shown in Fig. 6-3 (b), the
excitation dynamic process in PCDTBT:PC71BM can be described as following: photons
with sub-bandgap energy directly pump the molecules to the “hot” CT states through
Figure 6-4. (color) CMEAS results of pristine PCDTBT. A) The current-voltage characteristics of the pristine PCDTBT device, the inset shows the data in logarithm scale. B) The voltage dependence of in phase and quadrature
signals of the same devices with optical excitation at ex = 1 m.
which excitons can dissociate into separated charges at sub-picosecond range before
relaxing to the lowest-lying CT014, 198. These charged molecules form dipoles across the
polymer-fullerene interfaces and modulate the absorption coefficient of the blend as a
![Page 126: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/126.jpg)
126
response to the oscillating electric field. Such a phenomenon is similar to what has been
observed in charge modulation spectroscopy (CMS) which is, however, an electrical
pumping process by charge injection from external circuit. Burroughes et al. observed
the injected charges from external circuit would distort the polymer chain with the
addition charged soliton states which alter a wide absorption range of the polymer down
to 0.5 eV199.
Figure 6-5. (color) The normalized electroabsorption spectra of pristine PCDTBT under reverse (black) and positive (red) DC voltage biases VDC.
Based on the above postulation, we expect injecting holes from external circuit into
pristine PCDTBT should also give rise to some additional EA features in the sub-
bandgap region. As shown in Fig 4, we probed the EA signal of a pristine PCDTBT film
with a sub-bandgap probing source fixed at 1000 nm (1.24 eV) and scanned the applied
bias from -3 V to 5 V. Under reverse bias, with the absence of PC71BM, there is no EA
signal in the sub-bandgap region due to either charge injection or optical transition. With
![Page 127: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/127.jpg)
127
a bias larger than the built-in potential, however, the sub-bandgap signal emerges and
scale with the injection current through the PCDTBT film, as the threshold voltage (1.1
V) of the sub-bandgap EA signal is in good agreement with the turn-on voltage in the J-
V characteristics. Such a phenomenon was previously reported when voltage
modulated transmission (VMT) and capacitance show very similar bias dependence199.
We also notice that, the quadrature signal turns to negative at the same 1.1 V, which is
consistent with the earlier conclusion that the sub-bandgap signal has a slow response
to the modulation field. The EA spectra are shown in Fig. 5. Two different biases were
used to illustrate the sub-bandgap feature under reverse and forward biases. Due to
carrier injection at a bias of 3 V, there is an additional band of EA signal ranging from
0.8 eV to 1.5 eV which is not found when the device reversely biased. Comparing the
signal with the results in Fig. 1(c), the carrier-injection-induced signal has a much
broadened distribution and extends to as low as 0.8 eV (Fig. 6-5 inset). Such a
phenomenon is very close to the previously published PIA results because relaxed
polarons should have a lower energy than those “hot” CT states. The positive or
negative values of the signals are related to their different frequency response. In
addition, we noticed that the signal between 1.5 eV and 1.7 eV, which was found in the
charge-transfer-induced EA spectra (Fig. 5-1(c)), does not appear in Fig. 5. Because
there’s no CT states in the pristine PCDTBT, electrical pumping can only charge the
molecule to singlet, triplet and some trap states, the signal of CTn is expected to be
missing. These results confirm that, both the carrier-injection in the pristine PCDTBT
and the charge transfer in PCDTBT:PC71BM both give rise to subtle changes but
occupies different region in the sub-bandgap region of the absorption spectrum. It is
![Page 128: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/128.jpg)
128
worth to note, in our approach to measure the sub-bandgap response in the
PCDTBT:PC71BM blend, the device was under reverse-biased to eliminate charge
injection. Thus the sub-bandgap signal in Fig. 1(c) is only due to CTn modulation
resulted from optical pumping. Since this minimum pumping energy marks the graduate
transition from “cooled” CT states to “hot” CT states, we refer the CT induced EA onset
as the effective bandgap of the polymer:fullerene BHJ cells. We propose the transition
energy between “cooled” and “hot” CT states is more suitable for the definition of
effective bandgap Eeff. Because in efficient polymer:fullerene systems, like
PCDTBT:PC71BM, a larger portion of excitons dissociate through such band-states
instead of localized “cooled” CT states15, 200. In contrast, the ground CT states, as
usually observed in CT emission measurements, is not the destination of polymer-to-
fullerene charge transfer because additional energy-driven hopping or additional “IR
push”19 is required to complete charge separation. We call the technique as charge-
modulated electroabsorption spectroscopy (CMEAS) to distinguish it from the traditional
EA spectra. The Eeff of 1.4 eV of the PCDTBT:PC71BM blend measured by CMEAS is
in slightly lower than the recently reported value, 1.5 eV, measured by photoemission
spectroscopy184. We attribute the difference to the inability to detect charge transfer
process using IPES.
The effective optical bandgap is not the only information we can extract from the
CMEAS spectra. It also provides insight into the exciton dissociation dynamics. As we
already known that the sub-bandgap feature determines the onset of “hot” CT states,
while the excitonic feature characterizes the optical gap of the polymer phase in the
blend. The difference of these two values is thus a good approximation of the interface
![Page 129: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/129.jpg)
129
effective force for the exciton dissociation. As obtained from Fig. 6-1 (c), the difference
is found to be 0.3~0.4 eV, a reasonable value to dissociate excitons24. However, such
minimum driving force seems to be unnecessary for the exciton dissociation through
higher-energy CT states. It can be seen, the sub-bandgap feature of PCDTBT:PC71BM
is a continuous band ranging from 1.4 eV to the emergence of pristine PC71BM’s
excitonic response at 1.7 eV. Therefore all the excitons generated with an optical
pumping energy between 1.4 eV and 1.8 eV can dissociate into separated carriers,
suggesting a carrier splitting process requiring negligible repulsing forces. Applying the
same analysis, the excitons generated in the fullerene phase have a maximum interface
effective force ~ 0.2 eV. The delocalized electron wavefunction in the fullerene structure
allows efficient charge transfer from PC71BM to PCDTBT. The CMEAS result also
provides a good profile of the broadly distributed CTn state energies, these charge
dissociation gateways distribute at least 0.3 eV on the energy coordinate.
6.4.2 Exploring the Excitonic Loss of Open Circuit Voltages
To carry out a comprehensive study of VOC loss, we selected 7 photovoltaic
polymers showing VOC values from 0.58 V to 0.90 V when blended with PC71BM. These
VOC values are summarized from the best performance report since we want to exclude
the VOC loss due to non-optimized charge extraction layers or electrodes. Also, we didn’t
use some very high VOC values achieved with the assistance of an equilibrium built-in
potential larger than the effective bandgap, because these large values are generated
by compensating the extra built-in potential due to large interfacial dipoles at
electrodes.120, 121 Three of the seven polymers (PCDTBT201, PDTG-TPD, and PDTS-
TPD119) have been reported with PCEs over 7% and VOC larger than 0.85 V. Both
PDTG-BTD and P3HT show low VOC values around 0.6 V. P(il-DTS) is a Isoindigo-
![Page 130: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/130.jpg)
130
dithienosilole based donor-acceptor polymer showing a medium VOC value (0.78 V) in
the P(il-DTS):PC71BM structure.202 PTB7:PC71BM solar cell also has a medium VOC
(0.75 V) if poly-electrolyte is not used to increase the built-in potential.99
Figure 6-6. (color) Open circuit voltages plotted as a function of effective bandgap measured by CV, the data is from reference. The dashed line is an indicator of Eq. 6-1.
Previous attempt to correlate the Eeff and VOC of polymer PV cells showed a linear
relationship with a voltage loss of 0.3 V as depicted in Eq. 6-1 160. Here, we plot the VOC
versus the Eeff obtained from cyclic voltammetry measurements (data summarized from
references28, 32, 160, 202, 203) for a series of donor-acceptor systems and the results are
shown in Fig. 6. While the VOC is generally higher for BHJ systems with a larger Eeff,
there is a large discrepancy to Eq. 6-1. For example, P3HT, PTB7 and P(il-DTS) deviate
from the empirical prediction by about 0.2 V on the VOC coordinate. The key issue is the
energy levels measured in pristine materials ruling out the possible energy level shifting
due to interface dipole in the BHJ systems. Also, the VOC loss does not seem to be a
constant in different polymer:fullerene systems.
![Page 131: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/131.jpg)
131
In the last section, we introduced a novel approach to determine the effective
bandgap of polymer:fullerene heterojunctions. The sub-bandgap signal in CMEAS
signifies the onset of “hot” CT band which is better definition of effective bandgap
because it is an electrical gap characterizing the direct charge transfer. In addition to the
CMEAS signals we showed in section 6.4.1, a series of spectra is also shown for
pristine PDTG-TPD and PDTG-TPD:PC71BM blend. It can be seen in Figure 6-7,
Figure 6-7. (color) CMEAS from a pristine PDTG-TPD sample, a PDTG-TPD:PC71BM blend and a linear combination of pristine PDTG-TPD and PC71BM signals. All the spectra are re-scaled using the same field condition 105Vcm-1.
the excitonic feature is red shifted a little by mixing PC71BM into PDTG-TPD. Moreover,
in the sub-bandgap region, we observed an additional feature from 1.1 eV to 1.6 eV.
This feature does not belong to any pristine material. The linear combination of PDTG-
TPD and PC71BM spectra (blue dashed line) is almost the same as the spectrum of
pristine PDTG-TPD. The sub-bandgap signal show different electric field dependence
(DC amplitude and modulation frequency) from the excitonic signal 1.7 eV to 2.0 eV.
![Page 132: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/132.jpg)
132
Therefore, the effective bandgap determined by the onset of “hot” CT band is 1.10 eV,
0.24 eV higher than the reported VOC values.
Using the same experimental approach that carried out for PDTG-TPD and
PCDTBT, we continued the measurement on the other polymer:PC71BM BHJ systems.
In order to reach the same VOC values in the references, the processing condition was
optimized for each polymer:PC71BM system. The CMEAS measurements were then
carried out in the same condition. The results in the sub-bandgap range are shown in
Figure 6-8.
Figure 6-8. (color) Sub-bandgap CMEAS signals of a series of photovoltaic polymers. The onset of the sub-bandgap feature is defined as the effective bandgap.
In the sequence of onset energy of sub-bandgap signals, seven BHJ systems show
effective bandgaps from 0.85 eV to 1.40 eV. We also notice that, the Eeff values
![Page 133: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/133.jpg)
133
determined by CMEAS are quite different from those by electrochemical methods.
PCDTBT:PC71BM shows a medium |ED-HOMO-EA-LUMO| value (1.15 eV) in Figure 6-6, but
it actually has the largest Eeff (1.40 eV) and VOC (0.90 V) values among all the seven
systems. P(il-DTS):PC71BM shows a |ED-HOMO-EA-LUMO| as large as 1.25 eV, its Eeff is in
fact only 0.86 eV according to the spectrum. However, low VOC systems, such as
PDTG-BTD and P3HT generally show lower Eeff values than the systems showing
higher VOCs. These sub-bandgap signals all show very slow response to the external
modulation field, the positive or negative sub-bangap signal values that are measured
using the fixed modulation frequency (1K Hz) can be related to the different frequency
response due to variant reorganization energies in these systems.
Plotting the VOCs as a function of measured Eeffs, we get the trend in Figure 6-9.
Figure 6-9. (color) VOCs plotted as a function of measured Eeffs measured by CMEAS
It can be seen that, although we get a much better trend showing VOCs increases as a
function of measured Eeffs, the voltage loss is definitely not a universal constant
throughout the 7 samples. As a next step, we sought to figure out the mechanisms that
![Page 134: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/134.jpg)
134
causes materials dependent VOC loss which is expressed as .
According to Eq. 6-1, should be composed of a loss due to bimolecular
recombination and a further energy loss during the charge separation process.
Regarding both of these two mechanisms are highly related to the dielectric properties
of the sample, we decided to probe as a function of dielectric constant which ca
be determined by a measurement of geometric capacitance. The results (Figure 6-10)
show that these results are highly dependent on their dielectric constants. We can see
that these samples show a decreased VOC loss with their increased dielectric constants,
Figure 6-10. (color) plotted as a function of the inverse of dielectric constants. The dashed line is an indicator of eye.
as shown by the dashed line. In particular, with the smallest dielectric constant among
all the samples, PCDTBT:PC71BM shows a VOC larger than 0.5 V which is unreasonable
if it is entirely due to bimolecular recombination. Since the carrier concentration at open
circuit condition cannot drop to 1013cm-3, we suspect there’s a contribution from the term
ECS in Eq. 6-2. For the samples with a VOC loss around 0.3 V, ECS may still be
![Page 135: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/135.jpg)
135
measurable because the Eeffs obtained using CMEAS already consider the DOS
disorder which makes lower than 0.3 eV. For the samples with a VOC
loss lower than 0.2 V, the ECS values are expected to be negligible due to their large
dielectric constants.
Here we used TPV to extract the carrier lifetime under open circuit conditions. The
decay of the photo-voltage perturbation follows the single exponential decay as the
recombination is a result of low-level excitation. The lifetime values can be further used
to calculate the carrier concentration using . All the measurements are carried
out under one sun condition. We summarized the results in Table 6-1. During the
Table 6-1. Summary of carrier concentrations and recombination induced VOC loss
Polymers r (s) n (1016 cm-3) kTln(np/NcNv) ECS (eV)
PCDTBT 3.36±0.24 2.05 1.69 -0.16 0.34 P3HT 4.20±0.20 8.11 4.74 -0.10 0.19
PDTS-TPD 4.17±0.22 0.64 0.67 -0.20 0.10 PDTG-TPD 4.27±0.21 0.98 1.20 -0.17 0.05 PDTG-BTD 4.41±0.14 0.75 0.82 -0.19 0.08
PTB7 4.46±0.23 0.71 0.89 -0.19 0.04 P(il-DTS) 4.95±0.14 1.50 1.50 -0.16 <0.01
calculation of , the number of available states at the band tail is
estimated as following: Nc=5×1017cm-3, Nv=1×1019cm-3. Because the Eeff values
already subtracted the degree of disorder, we didn’t use a DOS peak value (e.g. Nv=1×
1020 cm-3eV-1) in the calculation. The last two columns in Table 6-1 are plotted in 6-11.
A clear trend of dielectric dependence can be seen as the energy loss during the charge
separation process should be related to the weak but existing coulombic interaction of
original geminate pairs. This result is the first experimental demonstration of excitonic
induced VOC loss. In particular, such an effect is very pronounced in the systems with
![Page 136: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/136.jpg)
136
lower dielectric constants. In the systems with higher dielectric constants close to 5, the
VOC loss is almost entirely due to bimolecular recombination.
Figure 6-11. (color) ECS (the VOC loss during the charge separation process) plotted as a function of the inverse of dielectric constants.
6.5 Summary
In summary, we demonstrated a general approach to directly measure the
effective bandgap, Eeff, of a polymer bulk-heterojunction photovoltaic cell using charge-
modulated electroabsorption spectroscopy (CMEAS). Using CMEAS, we investigated
the open-circuit voltages of high efficiency BHJ devices based on several photovoltaic
polymers and found that the open-circuit voltage values of these devices have a non-
linear dependence on the effective bandgap energies. We have also shown that the
deviation from the non-linearity can be explained by taking into account the coulombic
interaction during the charge separation stage. This result is the first experimental
demonstration of this VOC loss mechanism. Our experimental technique as well as the
experimental results not only facilitate the detail study of energy level alignment at
![Page 137: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/137.jpg)
137
organic heterojunctions, but also provide insight to further improving the PV device
performance.
![Page 138: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/138.jpg)
138
CHAPTER 7 CONCLUSIONS AND FUTURE WORK
7.1 Conclusions
In this dissertation, electronic processes of polymer:fullerene bulk heterojunction
solar cells are discussed from the aspects of charge-generation, transport,
recombination, interfacial engineering and their impact on solar cell performance.
Different experimental techniques were used to probe the carrier mobility, lifetime and
the energy alignment in the BHJ structure.
The charge generation mechanism of polymer solar cells is in contrast with
inorganic cells. Electrons and holes are generated in different materials as almost an
instantaneous response to the photo-induced exciton formation. Since the charge
generation and recombination both happens at the donor-acceptor interface, carriers
concentration is severely limited by the bimolecular recombination process. As shown in
Chapter 6, we studied the carrier concentration in different polymer:fullerene systems
under open circuit conditions. It is universal that bimolecular recombination directly
causes a significant loss of quasi-Fermi level splitting and thus VOC of the solar cell. The
charge generation process and the photovoltage output are also correlated by the
following facts. The nature of excitonic cell determines that the carriers are affected by
the coulombic interaction until the geminate pair is completely separated. We first used
CMEAS as an innovative tool to probe the effective bandgap of different
polymer:fullerene BHJs. Then we extract the voltage loss due to recombination by
carrying out TPV measurements. As another important result of Chapter 6, some BHJ
systems with lowest dielectric constants show an extra VOC loss during the charge
separation process. The CMEAS technique candidate for the definition of effective
![Page 139: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/139.jpg)
139
bandgap for BHJ because it probes the onset of higher-energy CT manifolds (“hot” CT
states). In the measurement, a sub-bandgap pumping can directly generate hot CT
states across the donor-acceptor interfaces. These loosely bounded electrons and
holes can respond to the external oscillating field and result in subtle changes in
absorption spectra.
Carrier transport in the donor-acceptor interpenetration network can be described
by hopping mechanism. J-V characteristics follow the trend of space charge limited
current and trap charge limited current behaviors under different internal fields.
Correlated disorder model is a good approximation to explain the electric field and
temperature dependent carrier mobility. Despite the low carrier mobility in organic
materials, high FFs can still be achieved. From the perspective of transport, a balanced
hole-electron conduction is more important than simply pursuing higher hole mobilities
in polymers. In Chapter 3, through a detailed photocurrent analysis, we showed that a
severely imbalanced transport can redistribute the internal field distribution and cause
space charge accumulation. Thus the output photocurrent is space charge limited, with
its value determined by the slow carrier mobility, charge generation rate and applied
bias. Space charge limited photocurrent significantly reduces the FF of polymer solar
cells. A balanced transport usually gives rise to a much higher FF as well as charge
extraction efficiency.
In Chapter 4, we discuss the role of bimolecular recombination with the absence of
charge-imbalance issue. Our TPV measurements revealed that recombination is very
intensive for polymer:fullerene solar cells, especially for the systems with larger
energetic disorder. We use the small polaron model to correlate the larger disorder and
![Page 140: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/140.jpg)
140
larger recombination rate. This model is applicable to explain the significant FF drop
due to recombination limited photocurrent. In addition, as shown by Ph-CELIV results,
the recombination rate is significantly reduced when the internal field increases to a
corresponding bias of the maximum power point. Thus, by experimentally comparing
recombination process in BHJ systems with different degree of energetic disorder, we
conclude recombination limited photocurrent should occur in the systems with larger
energetic disorder despite the balanced electron-hole transport.
Charge collection and interfacial engineering is the topic we covered in Chapter 5.
Transition metal oxide such as ZnO is good candidate to make Ohmic contact between
fullerene and electrodes like TCO and aluminum. MoO3 is a high work function oxide to
provide an optimum Fermi-level alignment with the HOMO level of most photovoltaic
polymers. The inverted structure using both ZnO and MoO3 is a structure compatible
with the future large-scale printing process and requirement for better device stability.
Using a novel donor-acceptor polymer—PDTG-TPD, we demonstrate a preliminary
inverted cell with an efficiency of 7.3%. As the second part of Chapter 5, we sought to
reduce the defects concentration in the ZnO nanoparticle interlayer since these defects
are proved to reduce the carrier lifetime at the ZnO/polymer interface. Through
optimized UV-ozone treatment condition, we demonstrated the defects reduction in ZnO
nanoparticle layer as well as the improvement of solar cell performance. The inverted
reached a lab measured efficiency of 8.1% and a certified efficiency of 7.4%, which was
the world record for the inverted structure until this September. The device with
encapsulation still showed an efficiency of 7.2% after a storage time of 14 months.
![Page 141: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/141.jpg)
141
7.2 Future Work
7.2.1 The Reduction of Energetic Disorder
The work in Chapter 3 and 4 both deal with the photocurrent loss at low extraction
field condition. It is clear that a high mobility is not sufficient to generate efficient charge
extraction. Recombination limited photocurrent occurs even without space charge
accumulation. According to the small polaron model, the charge transfer process during
bimolecular recombination is easier to happen when there is larger energetic disorder.
However, a direct correlation between the polymer structure and disorder may be more
helpful for chemists because better materials can be created by lowering the degree of
disorder.
The future work may first rely on the quantum chemistry calculation which can
determine which structure generates smaller local potential fluctuation. The energetic
disorder in newly synthesized materials can be characterized by mobility relaxation and
temperature dependent zero-field mobility. Carrier lifetime can be proved by TPV. The
dispersive transport and recombination characteristics eventually determine the field
dependence of drift length of photo-carriers.
7.2.2 Exciton Migration in Donor-Acceptor Polymers
During the charge generation process of polymer:fullerene solar cells, photo-
generated exciton need to migrate to the donor-acceptor interface for charge transfer.
However, the process of exciton migration is less studied when comparing with the
charge transfer process. As a result, the motion of excitons are usually described as
“diffusion” and assumed to be very similar across all the polymer materials. In fact, the
migration process is not only different from a classical diffusion mechanism, but also
directly affects the photovoltaic performance because the intermolecular exciton transfer
![Page 142: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/142.jpg)
142
rate directly determines number of excitons that can hit the donor-acceptor interface in a
unit time which is a upper limit of charge generation rate for a polymer:fullerene solar
cell.204
Since all the molecules in the polymer domains are bonded with Van de Waals
force, the exciton transfer can be modeled in the approximation of the weak coupling
limit and thus a Foster-like approach. In this model, the energy transfer rate between an
excited donating molecule and a ground-state accepting molecule, kDA, can be derived
from the time-dependent perturbation theory and the Fermi golden rule as:205
(7-1)
wherein HDA is the matrix element characterizing electronic coupling between donor and
acceptor molecules; FCWD stands for Franck-Condon weighted density-of-states factor,
which is a product of the density of vibrational states (including 0th state) in the initial (D*
and A) and final states (D and A*) and their spectral overlap. Under the Condon
approximation—the electronic coupling is independent of nuclear arrangement, the
energy transition rate can be derived as:206
(7-2)
wherein is the fluorescent emission spectrum of the donor and is the
absorption spectrum of the acceptor. From Eq. 7-2, it is clear that both electronic
coupling and the spectral overlap factor are critical to the exciton transfer rate. The
electronic interaction is mainly determined by the dipole moment and spatial separation
of the molecules. The spectral overlap factor is actually can be experimentally
determined. Some features in the emission and absorption spectra such as Stokes shift
can be used to explain the different transition rate in different polymer systems.
![Page 143: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/143.jpg)
143
In the assumed quadratic potential energy surface on one single normal mode of
vibration, the lineshape of a vibration peak should follow the Poisson distribution:207, 208
where
is the Franck-Condon factor for normal mode n, S is
the Huang-Rhys factor of the nth mode, defined as the ratio of nuclear reorganization
energy and the vibrational energy. It is clear that a larger Huang-Rhys factor gives a
larger transition rate of that vibration mode. Also, in the simplified quadratic potential
model, Huang-Rhys factor is proportional to the Stokes shift of the polymer, which is
defined the coordinate difference between the 0-0 transition in the emission and
absorption spectra.209 Therefore, through the measurement of fluorescence emission
and absorption of certain pristine polymers and the analysis of the lineshape, we can
build a correlation between the exciton transition rate and charge generation rate. Some
polymers with the same donor but different acceptor units could be a good group of
systems for the studies. Here, we have three polymers: PDTG-TPD, PDTG-BTD and
P(il-DTG), with all the three sharing the same DTG unit as the donor. Thus, their
absorption lineshape are similar apart from the different weighted contribution from each
vibrational peaks (Figure 7-1). As expected, the three polymers show very different
Huang-Rhys factors according to the Gaussian fitting of their absorption spectra. On the
other side, when these polymers are individually blended with fullerene derivatives in
BHJ solar cells, the external quantum efficiencies show significant difference with
PDTG-TPD over 70%, PDTG-BTD ~55% and P(il-DTG) ~40%. As shown in Figure 7-2,
these three polymers also show Huang-Rhys factor values in the same trend.
It is thus very interesting to correlate the charge-transfer rate with the exciton
migration rate by continuing the study with emission measurements and quantum
![Page 144: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/144.jpg)
144
mechanical modeling. If the model is correct, a low Huang-Rhys factor should be a
thumb-up rule for the design of efficient photovoltaic polymers.
Figure 7-1. (color) The absorption spectra of PDTG-TPD, PDTG-BTD and P(il-DTG). The measurements were carried out with solid state polymer films on quartz substrates.
Figure 7-2. (color) The fitting of absorption spectra and Huang-Rhys factor extracted by
Gaussian fitting.
![Page 145: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/145.jpg)
145
APPENDIX A LIST OF MOLECULE STRUCTURES
PC61BM
PC71BM
IC60BA
IC70BA
P3HT
PG1
PG2
PG3
![Page 146: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/146.jpg)
146
PCDTBT
PDTG-BTD
PDTG-TPD
PDTS-BTD
PDTS-TPD
PTB7
P(il-DTS)
PEDOT:PSS
.
![Page 147: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/147.jpg)
147
APPENDIX B LIST OF PUBLICATIONS AND CONFERENCE PRESENTATIONS
Peer Reviewed Publications
1. Song Chen*, Sai-Wing Tsang* (* equal contribution), Tzunghan Lai, John R.
Reynolds and Franky So, “Open Circuit Voltage Loss in Excitonic Solar Cells”, (in
preparation).
2. Sai-Wing Tsang*, Song Chen*(* equal contribution) and Franky So, “A Direct
Measurement of Energy Alignment in Polymer:Fullerene Solar Cells”, (in
preparation).
3. Cephas E. Small, Sai-Wing Tsang, Song Chen, Sujin Baek, Chad M. Amb,
Jegadesan Subbiah, John R. Reynolds and Franky So, “Thickness Dependence
of Space-Charge Effects in Low-Bandgap Polymer Solar Cells”, (in preparation)
4. Jesse R. Manders, Sai-Wing Tsang, Michael J. Hartel, Tzung-han Lai, Song
Chen, Chad M. Amb, John R. Reynolds and Franky So, “Solution-Processed
Nickel Oxide Hole Transport Layer in High Efficiency Polymer Photovoltaic
Cells ”, Advanced Functional Materials, (submitted)
5. Song Chen, Jesse M. Manders, Sai-Wing Tsang and Franky So, “Metal Oxides
for Interface Engineering in Polymer Solar Cells”, Journal of chemistry
materials, 22, 24202 (2012). (Invited Review)
6. Chaoyu Xiang, Wanhoe Koo, Song Chen, Franky So, Xiong Liu, Xiangxing Kong
and Yunjun Wang. “Solution Processed Multilayer Cadmium-Free Blue/violet
Emitting Quantum Dot Light Emitting Diodes”, Applied Physics Letters, 101,
053303 (2012)
![Page 148: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/148.jpg)
148
7. Song Chen, Cephas E. Small, Jegadesan Subbiah, Chad M. Amb, Sai-Wing
Tsang, Tzung-Han Lai, Jesse M. Manders, John R. Reynolds and Franky So
“Inverted solar cells with reduced interface recombination”, Advanced Energy
Materials, 2, 1333 (2012) (Journal Cover)
8. Song Chen, Sai-Wing Tsang, Cephas E. Small, John R. Reynolds and Franky
So, “Breakthroughs in Photonics: Inverted Polymer Solar Cells”, IEEE Photonics
Journal, 4, 625 (2012)
9. Cephas E. Small*, Song Chen*(* equal contribution), Jegadesan Subbiah,
Chad M. Amb, Sai-Wing Tsang, Tzung-Han Lai, John R. Reynolds and Franky
So, “High-efficiency inverted dithienogermole–thienopyrrolodione-based polymer
solar cells ”, Nature Photonics, 5, 115 (2012)
10. Song Chen, Kaushik Roy Choudhury, Jegadeson Subbiah, Chad M. Amb, John
R. Reynolds and Franky So, “Photo-Carrier Recombination in Polymer Solar
Cells Based on P3HT and Silole-Based Copolymer”, Advanced Energy
Materials, 1, 963 (2011)
11. Chad M. Amb, Song Chen, Kenneth R. Graham, Jegadeson Subbiah, Cephas
E. Small, Franky So and John R. Reynolds, “Dithienogermole As a Fused
Electron Donnor in Bulk Heterojunction Solar Cells”, Journal of American
Chemistry Society, 133, 10062 (2011) (Cited more than 100 times)
12. Kaushik Roy Choudhury, Jegadeson Subbiah, Song Chen, Pierre M. Beaujuge,
Chad M. Amb, John R. Reynolds and Franky So, “Understanding the
performance and loss-mechanisms in donor-acceptor polymer based solar cells:
![Page 149: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/149.jpg)
149
Photocurrent generation, charge separation and carrier transport”, Solar Energy
Materials and Solar Cells, 95, 2502 (2011)
13. Paul A. Lane, Song Chen and Franky So, “Electromodulated doping of the hole
transport layer in a small molecule light emitting diode”, Journal of Photonics
for Energy, 1, 011020 (2011)
Oral Presentations in Conferences
1. Jesse R. Manders, Sai-Wing Tsang, Song Chen, Tzung-Han Lai, Michael J.
Hartel, Chad M. Amb, Kyukwan Zong, James J. Deininger, John R. Reynolds
and Frank So, “From Conception to Solar Cells: Solution-Procssed Nickel Oxide
Hole Transport Layers in High Efficnecy Organic Photovoltaics”, MRS 2012
spring meeting, San Francisco, J15.3
2. Sai-Wing Tsang, Cephas E. Small, Song Chen, Jegadesan Subbiah, Chad M.
Amb, Tzung-Han Lai, John R. Reynolds and Franky So, “8% Power Conversion
Efficiency Polymer Photovoltaic Cells with a Thick Layer of Dithienogemole-
Thienopyrrolodione:Fullerene”, MRS 2012 spring meeting, Boston V6.5
3. Cephas E. Small, Song Chen, Jegadesan Subbiah, Chad M. Amb, Sai-Wing
Tsang, Tzung-Han Lai, John R. Reynolds and Franky So, “High Efficiency
Inverted Dithienogermole-Thienopyrrolodione Based Polymer Solar Cells”, MRS
2012 spring meeting, Boston V6.8
4. Cephas E. Small, Chad M. Amb, Song Chen, Kenneth R. Graham, Jegadeson
Subbiah, Franky So and John R. Reynolds, “Dithienogermole As a Fused
Electron Donnor in Bulk Heterojunction Solar Cells”, MRS 2011 fall meeting,
Boston, E3.10.
![Page 150: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/150.jpg)
150
5. Song Chen, Cephas E. Small, Chad M. Amb, Tzung-Han Lai, Kenneth R.
Graham, John R. Reynolds and Franky So, “Achieving Higher than 8% Power
Conversion Efficiency by Modified Electron Extraction Layer in Polymer Bulk
Heterojunction Solar Cells”, MRS 2011 fall meeting, Boston, H8.8.
6. Song Chen, Kaushik Roy Choudhury, Frederick P. Steffy, Jegadeson Subbiah,
Chad M. Amb, John R. Reynolds and Franky So, “Investigating the loss-
mechanism of photo-current in low bandgap donor-acceptor copolymer based
solar cells: photo-carriers recombination”, SPIE Optics and Photonics 2011, San
Diego, 8116-51.
7. Song Chen, Jegadesan Subbiah, Chad M. Amb, John R. Reynolds and Franky
So, “Anode interlayer effect and photo-current loss mechanism of copolymer:
fullerene solar cells”, The International Conference on Nanophotonics (ICNP)
2011, Shanghai, O11.
8. Song Chen, Frederick P. Steffy, Kaushik Roy Choudhury, Chad Amb, John R.
Reynolds and Franky So, “Studying Charge Transport and Recombination in
Organic Solar Cells Using Photo-induced Carrier Extraction with Linearly
Increasing Voltage”, MRS 2010 fall meeting, Boston, E7.9.
9. Kaushik Roy Choudhury , Song Chen, Jegadesan Subbiah, Pierre Beaujuge,
John R. Reynolds and Franky So, “Understanding the performance and loss
mechanisms in bulk heterojunction solar cells based on a low bandgap green
polymer: photocurrent generation, charge separation and carrier transport”, MRS
2009 fall meeting, Boston, R12.7.
![Page 151: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/151.jpg)
151
Poster Presentations in Conferences
1. Song Chen, Cephas E. Small, Chad M. Amb, Tzung-Han Lai, Kenneth R.
Graham, John R. Reynolds and Franky So, “Achieving Higher than 8% Power
Conversion Efficiency by Modified Electron Extraction Layer in Polymer Bulk
Heterojunction Solar Cells”, ICSM 2012, Atlanta, PI-24.
2. Song Chen, Cephas E. Small, Jegadesan Subbiah, Chad M. Amb, Sai-Wing
Tsang, Tzung-Han Lai, Jesse M. Manders, John R. Reynolds and Franky So
“Inverted solar cells with reduced interface recombination”, MRS 2012 spring
meeting, San Francisco, Z7.26.
3. Jese R. Manders, Sai-Wing Tsang, Song Chen, Tzung-Han Lai, Michael J.
Hartel, Chad M. Amb, Kyukwan Zong, James J. Deininger, John R. Reynolds
and Frank So, “Low Temperature Solution-processed Nickel Oxide Hole Transort
Layers in High Efficiency Organic Photovoltaics”, MRS 2012 spring meeting, San
Francisco, W4.26.
4. Song Chen, Jegadesan Subbiah, Chad M. Amb, John R. Reynolds and Franky
So, “Bimolecular Recombination and Energetic Disorder in Low-gap Polymer
Solar Cells”, MRS 2011 spring meeting, San Francisco, OO10.3.
5. Song Chen, Kaushik Roy Choudhury, Jegadesan Subbiah, Pierre M. Beaujuge,
John R. Reynolds and Franky So, “Charge Transport Study in Organic
Semiconductors via Carrier Extraction with Linearly Increasing Voltage”, MRS
2009 fall meeting, Boston, S8.1.
6. Song Chen, Jaewon Lee and Franky So, “Improving operating lifetime by
enhancing hole injection in organic light emitting diodes”, MRS 2009 fall meeting,
S3.5.
![Page 152: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/152.jpg)
152
LIST OF REFERENCES
1. M. A. Green, K. Emery, Y. Hishikawa, W. Warta and E. D. Dunlop, Prog.
Photovolt., 2012, 20, 606-614. 2. R. F. Service, Science, 2011, 332, 293-293. 3. N. S. Sariciftci, L. Smilowitz, A. J. Heeger and F. Wudl, Science, 1992, 258,
1474-1476. 4. R. A. Marcus, J. Chem. Phys., 1956, 24, 966-978. 5. R. A. Marcus, J. Chem. Phys., 1957, 26, 867-871. 6. R. A. Marcus and P. Siders, J. Phys. Chem., 1982, 86, 622-630. 7. R. A. Marcus and N. Sutin, Biochimica Et Biophysica Acta, 1985, 811, 265-322. 8. Dogonadz.Rr, Kuznetso.Am and Vorotynt.Ma, Phys. Status Solidi B., 1972, 54,
125-134. 9. Dogonadz.Rr, Kuznetso.Am and Vorotynt.Ma, Phys. Status Solidi B., 1972, 54,
425-433. 10. P. Siders and R. A. Marcus, J. Am. Chem. Soc., 1981, 103, 741-747. 11. G. Garcia-Belmonte and J. Bisquert, Appl. Phys. Lett., 2010, 96, 113301. 12. T. Kirchartz, B. E. Pieters, J. Kirkpatrick, U. Rau and J. Nelson, Phys. Rev. B,
2011, 83, 115209. 13. J. J. Benson-Smith, L. Goris, K. Vandewal, K. Haenen, J. V. Manca, D.
Vanderzande, D. D. C. Bradley and J. Nelson, Adv. Funct. Mater., 2007, 17, 451-457.
14. F. Etzold, I. A. Howard, R. Mauer, M. Meister, T. D. Kim, K. S. Lee, N. S. Baek
and F. Laquai, J. Am. Chem. Soc., 2011, 133, 9469-9479. 15. B. S. Rolczynski, J. M. Szarko, H. J. Son, Y. Y. Liang, L. P. Yu and L. X. Chen, J.
Am. Chem. Soc., 2012, 134, 4142-4152. 16. V. I. Arkhipov, P. Heremans and H. Bassler, Appl. Phys. Lett., 2003, 82, 4605-
4607. 17. D. Veldman, S. C. J. Meskers and R. A. J. Janssen, Adv. Funct. Mater., 2009, 19,
1939-1948.
![Page 153: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/153.jpg)
153
18. R. A. Marsh, J. M. Hodgkiss and R. H. Friend, Adv. Mater., 2010, 22, 3672-+. 19. A. A. Bakulin, A. Rao, V. G. Pavelyev, P. H. M. van Loosdrecht, M. S.
Pshenichnikov, D. Niedzialek, J. Cornil, D. Beljonne and R. H. Friend, Science, 2012, 335, 1340-1344.
20. K. Vandewal, K. Tvingstedt, J. V. Manca and O. Inganas, IEEE J. Sel. Top.
Quant, 2010, 16, 1676-1684. 21. W. Shockley and H. J. Queisser, J. Appl. Phys., 1961, 32, 510-&. 22. B. Carsten, J. M. Szarko, H. J. Son, W. Wang, L. Y. Lu, F. He, B. S. Rolczynski,
S. J. Lou, L. X. Chen and L. P. Yu, J. Am. Chem. Soc., 2011, 133, 20468-20475. 23. D. Spiegel and A. J. Heeger, Polym. Commun., 1988, 29, 266-268. 24. C. W. Tang, Appl. Phys. Lett., 1986, 48, 183-185. 25. H. X. Zhou, L. Q. Yang and W. You, Macromolecules, 2012, 45, 607-632. 26. Z. G. Zhang and J. Z. Wang, J. Mater. Chem., 2012, 22, 4178-4187. 27. C. H. Duan, F. Huang and Y. Cao, J. Mater. Chem., 2012, 22, 10416-10434. 28. N. Blouin, A. Michaud and M. Leclerc, Adv. Mater., 2007, 19, 2295-+. 29. Y. Y. Liang, Z. Xu, J. B. Xia, S. T. Tsai, Y. Wu, G. Li, C. Ray and L. P. Yu, Adv.
Mater., 2010, 22, E135-+. 30. S. C. Price, A. C. Stuart, L. Q. Yang, H. X. Zhou and W. You, J. Am. Chem. Soc.,
2011, 133, 4625-4631. 31. T. Y. Chu, J. Lu, S. Beaupre, Y. Zhang, J. R. Pouliot, S. Wakim, J. Zhou, M.
Leclerc, Z. Li, J. Ding and Y. Tao, J. Am. Chem. Soc., 2011, 133, 4250. 32. C. M. Amb, S. Chen, K. R. Graham, J. Subbiah, C. E. Small, F. So and J. R.
Reynolds, J. Am. Chem. Soc., 2011, 133, 10062. 33. B. A. Gregg and M. C. Hanna, J. Appl. Phys., 2003, 93, 3605-3614. 34. A. Miller and E. Abrahams, Phys. Rev., 1960, 120, 745-755. 35. A. Pivrikas, G. Juska, A. J. Mozer, M. Scharber, K. Arlauskas, N. S. Sariciftci, H.
Stubb and R. Osterbacka, Phys. Rev. Lett., 2005, 94, 176806.
![Page 154: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/154.jpg)
154
36. P. W. M. Blom, M. J. M. deJong and S. Breedijk, Appl. Phys. Lett., 1997, 71, 930-932.
37. A. Foertig, A. Baumann, D. Rauh, V. Dyakonov and C. Deibel, Appl. Phys. Lett.,
2009, 95, 052104. 38. B. Kramer and A. Mackinnon, Rep. Prog. Phys., 1993, 56, 1469-1564. 39. P. W. Anderson, Phys. Rev., 1958, 109, 1492-1505. 40. T. Tiedje, J. M. Cebulka, D. L. Morel and B. Abeles, Phys. Rev. Lett., 1981, 46,
1425-1428. 41. H. Bassler, Phys. Status Solidi B., 1993, 175, 15-56. 42. N. F. Mott, J. Non-Cryst. Solids, 1968, 1, 1-17. 43. R. H. Young, Philos. Mag. B, 1995, 72, 435-457. 44. M. Pope and C. E. Swenberg, Electronic processes in organic crystals and
polymers, Oxford University Press, New York, 1999. 45. V. Ambegaokar, B. I. Halperin and J. S. Langer, Phys. Rev. B:Solid St., 1971, 4,
2612-+. 46. N. F. Mott, Adv. Phys., 1967, 16, 49-&. 47. P. A. Walley, Thin Solid Films, 1968, 2, 327-&. 48. M. Morgan and P. A. Walley, Philos. Mag., 1971, 23, 661-&. 49. N. F. Mott and R. W. Gurney, Oxford University Press, London, 1940. 50. P. E. Burrows, Z. Shen, V. Bulovic, D. M. McCarty, S. R. Forrest, J. A. Cronin
and M. E. Thompson, J. Appl. Phys., 1996, 79, 7991-8006. 51. M. A. Lampert, Phys. Rev., 1956, 103, 1648-1656. 52. Murgatro.Pn, J. Phys. D: Appl. Phys., 1970, 3, 151-&. 53. D. M. Pai, J. Chem. Phys., 1970, 52, 2285-&. 54. S. V. Novikov, D. H. Dunlap, V. M. Kenkre, P. E. Parris and A. V. Vannikov, Phys.
Rev. Lett., 1998, 81, 4472-4475.
![Page 155: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/155.jpg)
155
55. A. J. Mozer, G. Dennler, N. S. Sariciftci, M. Westerling, A. Pivrikas, R. Osterbacka and G. Juska, Phys. Rev. B, 2005, 72, 035217.
56. S. R. Cowan, A. Roy and A. J. Heeger, Phys. Rev. B, 2010, 82, 245207. 57. M. Lenes, M. Morana, C. J. Brabec and P. W. M. Blom, Adv. Funct. Mater., 2009,
19, 1106-1111. 58. S. Chen, K. R. Choudhury, J. Subbiah, C. M. Amb, J. R. Reynolds and F. So,
Adv. Energy Mater., 2011, 1, 963-969. 59. G. Yu, J. Gao, J. C. Hummelen, F. Wudl and A. J. Heeger, Science, 1995, 270,
1789-1791. 60. G. Li, V. Shrotriya, J. S. Huang, Y. Yao, T. Moriarty, K. Emery and Y. Yang, Nat.
Mater., 2005, 4, 864-868. 61. G. Li, Y. Yao, H. Yang, V. Shrotriya, G. Yang and Y. Yang, Adv. Funct. Mater.,
2007, 17, 1636-1644. 62. L. M. Chen, Z. R. Hong, G. Li and Y. Yang, Adv. Mater., 2009, 21, 1434-1449. 63. K. R. Choudhury, J. W. Lee, N. Chopra, A. Gupta, X. Z. Jiang, F. Amy and F. So,
Adv. Funct. Mater., 2009, 19, 491-496. 64. G. Juska, K. Arlauskas, M. Viliunas and J. Kocka, Phys. Rev. Lett., 2000, 84,
4946-4949. 65. G. Dennler, A. J. Mozer, G. Juska, A. Pivrikas, R. Osterbacka, A. Fuchsbauer
and N. S. Sariciftci, Org. Electron., 2006, 7, 229-234. 66. J. Lorrmann, B. H. Badada, O. Inganas, V. Dyakonov and C. Deibel, J. Appl.
Phys., 2010, 108. 67. C. G. Shuttle, B. O'Regan, A. M. Ballantyne, J. Nelson, D. D. C. Bradley, J. de
Mello and J. R. Durrant, Appl. Phys. Lett., 2008, 92, 093311. 68. D. E. Aspnes, Surf. Sci., 1973, 37, 418-442. 69. G. Weiser, Phys. Rev. B, 1992, 45, 14076-14085. 70. T. W. Hagler, K. Pakbaz and A. J. Heeger, Phys. Rev. B, 1994, 49, 10968-10975. 71. P. J. Brewer, P. A. Lane, A. J. deMello, D. D. C. Bradley and J. C. deMello, Adv.
Funct. Mater., 2004, 14, 562-570.
![Page 156: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/156.jpg)
156
72. V. Bodrozic, T. M. Brown, S. Mian, D. Caruana, M. Roberts, N. Phillips, J. J. Halls, I. Grizzi, J. H. Burroughes and F. Cacialli, Adv. Mater., 2008, 20, 2410-+.
73. T. M. Brown, J. S. Kim, R. H. Friend, F. Cacialli, R. Daik and W. J. Feast, Appl.
Phys. Lett., 1999, 75, 1679-1681. 74. D. E. Aspnes, Phys. Rev., 1966, 147, 554-&. 75. C. D. Dimitrakopoulos and P. R. L. Malenfant, Adv. Mater., 2002, 14, 99-+. 76. R. Coehoorn, W. F. Pasveer, P. A. Bobbert and M. A. J. Michels, Phys. Rev. B,
2005, 72, 155206. 77. C. Tanase, E. J. Meijer, P. W. M. Blom and D. M. de Leeuw, Phys. Rev. Lett.,
2003, 91, 216601. 78. Y. P. Zou, D. Gendron, R. Badrou-Aich, A. Najari, Y. Tao and M. Leclerc,
Macromolecules, 2009, 42, 2891-2894. 79. R. S. Ashraf, Z. Y. Chen, D. S. Leem, H. Bronstein, W. M. Zhang, B. Schroeder,
Y. Geerts, J. Smith, S. Watkins, T. D. Anthopoulos, H. Sirringhaus, J. C. de Mello, M. Heeney and I. McCulloch, Chem. Mater., 2011, 23, 768-770.
80. M. M. Mandoc, L. J. A. Koster and P. W. M. Blom, Appl. Phys. Lett., 2007, 90,
133504. 81. C. Deibel, A. Wagenpfahl and V. Dyakonov, Physica Status Solidi-Rapid
Research Letters, 2008, 2, 175-177. 82. A. M. Goodman and A. Rose, J. Appl. Phys., 1971, 42, 2823-&. 83. V. D. Mihailetchi, J. Wildeman and P. W. M. Blom, Phys. Rev. Lett., 2005, 94,
126602. 84. M. Lenes, L. J. A. Koster, V. D. Mihailetchi and P. W. M. Blom, Appl. Phys. Lett.,
2006, 88, 243502-243503. 85. J. H. Hou, H. Y. Chen, S. Q. Zhang, R. I. Chen, Y. Yang, Y. Wu and G. Li, J. Am.
Chem. Soc., 2009, 131, 15586-+. 86. M. C. Scharber, M. Koppe, J. Gao, F. Cordella, M. A. Loi, P. Denk, M. Morana, H.
J. Egelhaaf, K. Forberich, G. Dennler, R. Gaudiana, D. Waller, Z. G. Zhu, X. B. Shi and C. J. Brabec, Adv. Mater., 2010, 22, 367-+.
87. J. Subbiah, P. M. Beaujuge, K. R. Choudhury, S. Ellinger, J. R. Reynolds and F.
So, ACS Appl. Mater. Interfaces, 2009, 1, 1154-1158.
![Page 157: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/157.jpg)
157
88. V. D. Mihailetchi, L. J. A. Koster, P. W. M. Blom, C. Melzer, B. de Boer, J. K. J. van Duren and R. A. J. Janssen, Adv. Funct. Mater., 2005, 15, 795-801.
89. C. Melzer, E. J. Koop, V. D. Mihailetchi and P. W. M. Blom, Adv. Funct. Mater.,
2004, 14, 865-870. 90. P. W. M. Blom, V. D. Mihailetchi, L. J. A. Koster and D. E. Markov, Adv. Mater.,
2007, 19, 1551-1566. 91. P. M. Beaujuge, J. Subbiah, K. R. Choudhury, S. Ellinger, T. D. McCarley, F. So
and J. R. Reynolds, Chem. Mater., 2010, 22, 2093-2106. 92. K. Roy Choudhury, J. Subbiah, S. Chen, P. M. Beaujuge, C. M. Amb, J. R.
Reynolds and F. So, Sol. Energy Mater. Sol. Cells, 2011, 95, 2502. 93. L. J. A. Koster, E. C. P. Smits, V. D. Mihailetchi and P. W. M. Blom, Phys. Rev. B,
2005, 72, 085205. 94. R. Sokel and R. C. Hughes, J. Appl. Phys., 1982, 53, 7414-7424. 95. W. L. Ma, C. Y. Yang, X. Gong, K. Lee and A. J. Heeger, Adv. Funct. Mater.,
2005, 15, 1617-1622. 96. V. D. Mihailetchi, H. X. Xie, B. de Boer, L. J. A. Koster and P. W. M. Blom, Adv.
Funct. Mater., 2006, 16, 699-708. 97. D. Muhlbacher, M. Scharber, M. Morana, Z. G. Zhu, D. Waller, R. Gaudiana and
C. Brabec, Adv. Mater., 2006, 18, 2884-+. 98. S. H. Park, A. Roy, S. Beaupre, S. Cho, N. Coates, J. S. Moon, D. Moses, M.
Leclerc, K. Lee and A. J. Heeger, Nat. Photon., 2009, 3, 297-U295. 99. H. Y. Chen, J. H. Hou, S. Q. Zhang, Y. Y. Liang, G. W. Yang, Y. Yang, L. P. Yu,
Y. Wu and G. Li, Nat. Photon., 2009, 3, 649-653. 100. J. Subbiah, C. M. Amb, I. Irfan, Y. Gao, J. R. Reynolds and F. So, Sol. Energy
Mater. Sol. Cells, 2012, 97, 97. 101. C. G. Shuttle, B. O'Regan, A. M. Ballantyne, J. Nelson, D. D. C. Bradley and J. R.
Durrant, Phys. Rev. B, 2008, 78, 113201. 102. R. Hamilton, C. G. Shuttle, B. O'Regan, T. C. Hammant, J. Nelson and J. R.
Durrant, Journal of Physical Chemistry Letters, 2010, 1, 1432-1436. 103. I. I. Fishchuk, V. I. Arkhipov, A. Kadashchuk, P. Heremans and H. Bassler, Phys.
Rev. B, 2007, 76, 045210.
![Page 158: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/158.jpg)
158
104. J. Subbiah, P. M. Beaujuge, K. R. Choudhury, S. Ellinger, J. R. Reynolds and F. So, Org. Electron., 2010, 11, 955-958.
105. B. C. O'Regan and J. R. Durrant, J. Phys. Chem. B, 2006, 110, 8544-8547. 106. B. C. O'Regan, S. Scully, A. C. Mayer, E. Palomares and J. Durrant, J. Phys.
Chem. B, 2005, 109, 4616-4623. 107. F. L. Zhang, W. Mammo, L. M. Andersson, S. Admassie, M. R. Andersson, L.
Inganas, S. Admassie, M. R. Andersson and O. Ingands, Adv. Mater., 2006, 18, 2169-+.
108. A. J. Mozer, N. S. Sariciftci, L. Lutsen, D. Vanderzande, R. Osterbacka, M.
Westerling and G. Juska, Appl. Phys. Lett., 2005, 86, 112104. 109. A. Liu, S. Zhao, S. B. Rim, J. Wu, M. Konemann, P. Erk and P. Peumans, Adv.
Mater., 2008, 20, 1065-+. 110. V. D. Mihailetchi, L. J. A. Koster, J. C. Hummelen and P. W. M. Blom, Phys. Rev.
Lett., 2004, 93, 216601. 111. K. Maturova, S. S. van Bavel, M. M. Wienk, R. A. J. Janssen and M. Kemerink,
Nano Letters, 2009, 9, 3032-3037. 112. C. G. Shuttle, A. Maurano, R. Hamilton, B. O'Regan, J. C. de Mello and J. R.
Durrant, Appl. Phys. Lett., 2008, 93, 183501. 113. H. Bassler, G. Schonherr, M. Abkowitz and D. M. Pai, Phys. Rev. B, 1982, 26,
3105-3113. 114. G. Juska, K. Arlauskas, M. Viliunas, K. Genevicius, R. Osterbacka and H. Stubb,
Phys. Rev. B, 2000, 62, R16235-R16238. 115. S. E. Shaheen, C. J. Brabec, N. S. Sariciftci, F. Padinger, T. Fromherz and J. C.
Hummelen, Appl. Phys. Lett., 2001, 78, 841-843. 116. M. Granstrom, K. Petritsch, A. C. Arias, A. Lux, M. R. Andersson and R. H.
Friend, Nature, 1998, 395, 257-260. 117. J. Y. Kim, S. H. Kim, H. H. Lee, K. Lee, W. L. Ma, X. Gong and A. J. Heeger, Adv.
Mater., 2006, 18, 572-+. 118. G. Li, C. W. Chu, V. Shrotriya, J. Huang and Y. Yang, Appl. Phys. Lett., 2006, 88,
253503.
![Page 159: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/159.jpg)
159
119. S. Chen, C. E. Small, C. M. Amb, J. Subbiah, T. H. Lai, S. W. Tsang, J. R. Reynolds and F. So, Adv. Energy Mater., 2012, 2, 1333-1337.
120. Z. C. He, C. M. Zhong, X. Huang, W. Y. Wong, H. B. Wu, L. W. Chen, S. J. Su
and Y. Cao, Adv. Mater., 2011, 23, 4636-+. 121. Z. He, C. Zhong, S. Su, M. Xu, H. Wu and Y. Cao, Nat Photon, 2012, 6, 593-597. 122. L. T. Dou, J. B. You, J. Yang, C. C. Chen, Y. J. He, S. Murase, T. Moriarty, K.
Emery, G. Li and Y. Yang, Nat. Photon., 2012, 6, 180-185. 123. F. C. Krebs, Sol. Energy Mater. Sol. Cells, 2009, 93, 1636-1641. 124. F. C. Krebs, Sol. Energy Mater. Sol. Cells, 2009, 93, 465-475. 125. H. Hoppe and N. S. Sariciftci, J. Mater. Chem., 2006, 16, 45-61. 126. Y. Park, V. Choong, Y. Gao, B. R. Hsieh and C. W. Tang, Appl. Phys. Lett., 1996,
68, 2699-2701. 127. K. Sugiyama, H. Ishii, Y. Ouchi and K. Seki, J. Appl. Phys., 2000, 87, 295-298. 128. H. Ishii, K. Sugiyama, D. Yoshimura, E. Ito, Y. Ouchi and K. Seki, IEEE J. Sel.
Top. Quant, 1998, 4, 24-33. 129. J. Hwang, A. Wan and A. Kahn, Mater. Sci. Eng. R. Rep., 2009, 64, 1-31. 130. I. G. Hill, D. Milliron, J. Schwartz and A. Kahn, Appl. Surf. Sci., 2000, 166, 354-
362. 131. M. A. Baldo and S. R. Forrest, Phys. Rev. B, 2001, 64. 132. B. N. Limketkai and M. A. Baldo, Phys. Rev. B, 2005, 71. 133. C. W. Tang and S. A. Vanslyke, Appl. Phys. Lett., 1987, 51, 913-915. 134. E. I. Haskal, A. Curioni, P. F. Seidler and W. Andreoni, Appl. Phys. Lett., 1997,
71, 1151-1153. 135. L. S. Hung, C. W. Tang and M. G. Mason, Appl. Phys. Lett., 1997, 70, 152-154. 136. C. I. Wu, C. T. Lin, Y. H. Chen, M. H. Chen, Y. J. Lu and C. C. Wu, Appl. Phys.
Lett., 2006, 88, 152104. 137. G. Gustafsson, Y. Cao, G. M. Treacy, F. Klavetter, N. Colaneri and A. J. Heeger,
Nature, 1992, 357, 477-479.
![Page 160: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/160.jpg)
160
138. G. Heywang and F. Jonas, Adv. Mater., 1992, 4, 116-118. 139. Y. Yang and A. J. Heeger, Appl. Phys. Lett., 1994, 64, 1245-1247. 140. S. A. Carter, M. Angelopoulos, S. Karg, P. J. Brock and J. C. Scott, Appl. Phys.
Lett., 1997, 70, 2067-2069. 141. J. H. Seo, A. Gutacker, Y. M. Sun, H. B. Wu, F. Huang, Y. Cao, U. Scherf, A. J.
Heeger and G. C. Bazan, J. Am. Chem. Soc., 2011, 133, 8416-8419. 142. S. Chen, J. R. Manders, S.-W. Tsang and F. So, J. Mater. Chem., 2012, 22,
24202-24212. 143. H. Moormann, D. Kohl and G. Heiland, Surf. Sci., 1980, 100, 302-314. 144. D. W. Bahnemann, C. Kormann and M. R. Hoffmann, J. Phys. Chem., 1987, 91,
3789-3798. 145. C. Pacholski, A. Kornowski and H. Weller, Angew. Chem. Int. Ed., 2002, 41,
1188-+. 146. W. J. E. Beek, M. M. Wienk, M. Kemerink, X. N. Yang and R. A. J. Janssen, J.
Phys. Chem. B, 2005, 109, 9505-9516. 147. T. Y. Chu, S. W. Tsang, J. Y. Zhou, P. G. Verly, J. P. Lu, S. Beaupre, M. Leclerc
and Y. Tao, Sol. Energy Mater. Sol. Cells, 2012, 96, 155-159. 148. L. Qian, Y. Zheng, J. G. Xue and P. H. Holloway, Nat. Photon., 2011, 5, 543-548. 149. S. Tokito, K. Noda and Y. Taga, J. Phys. D: Appl. Phys., 1996, 29, 2750-2753. 150. D. Y. Kim, J. Subbiah, G. Sarasqueta, F. So, H. J. Ding, Irfan and Y. L. Gao, Appl.
Phys. Lett., 2009, 95, 093304. 151. T. S. Sian and G. B. Reddy, Sol. Energy Mater. Sol. Cells, 2004, 82, 375-386. 152. K. Kanai, K. Koizumi, S. Ouchi, Y. Tsukamoto, K. Sakanoue, Y. Ouchi and K.
Seki, Org. Electron., 2010, 11, 188-194. 153. M. Kroger, S. Hamwi, J. Meyer, T. Riedl, W. Kowalsky and A. Kahn, Org.
Electron., 2009, 10, 932-938. 154. J. Meyer, A. Shu, M. Kroger and A. Kahn, Appl. Phys. Lett., 2010, 96, 133308. 155. Irfan, H. J. Ding, Y. L. Gao, C. Small, D. Y. Kim, J. Subbiah and F. So, Appl.
Phys. Lett., 2010, 96, 243307.
![Page 161: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/161.jpg)
161
156. J. Meyer, R. Khalandovsky, P. Gorrn and A. Kahn, Adv. Mater., 2011, 23, 70-+. 157. M. T. Greiner, M. G. Helander, Z. B. Wang, W. M. Tang, J. Qiu and Z. H. Lu,
Appl. Phys. Lett., 2010, 96, 213302. 158. M. Kroger, S. Hamwi, J. Meyer, T. Riedl, W. Kowalsky and A. Kahn, Appl. Phys.
Lett., 2009, 95, 123301. 159. M. T. Greiner, M. G. Helander, W. M. Tang, Z. B. Wang, J. Qiu and Z. H. Lu, Nat.
Mater., 2012, 11, 76-81. 160. M. C. Scharber, D. Wuhlbacher, M. Koppe, P. Denk, C. Waldauf, A. J. Heeger
and C. L. Brabec, Adv. Mater., 2006, 18, 789-+. 161. C. E. Small, S. W. Tsang, J. Kido, S. K. So and F. So, Adv. Funct. Mater., 2012,
22. 162. S. K. Hau, H. L. Yip, H. Ma and A. K. Y. Jen, Appl. Phys. Lett., 2008, 93, 233304. 163. L. Qian, Y. Zheng, K. R. Choudhury, D. Bera, F. So, J. G. Xue and P. H.
Holloway, Nano Today, 2010, 5, 384-389. 164. D. Bera, L. Qian, S. Sabui, S. Santra and P. H. Holloway, Optical Materials, 2008,
30, 1233-1239. 165. B. C. O'Regan and F. Lenzmann, J. Phys. Chem. B, 2004, 108, 4342-4350. 166. S. D. Oosterhout, M. M. Wienk, S. S. van Bavel, R. Thiedmann, L. J. A. Koster, J.
Gilot, J. Loos, V. Schmidt and R. A. J. Janssen, Nat. Mater., 2009, 8, 818-824. 167. V. A. Fonoberov, K. A. Alim, A. A. Balandin, F. X. Xiu and J. L. Liu, Phys. Rev. B,
2006, 73, 165317. 168. S. Lany and A. Zunger, J. Appl. Phys., 2006, 100, -. 169. F. J. Haug, D. Rudmann, H. Zogg and A. N. Tiwari, Thin Solid Films, 2003, 431,
431-435. 170. M. R. Balboul, A. Jasenek, O. Chernykh, U. Rau and H. W. Schock, Thin Solid
Films, 2001, 387, 74-76. 171. V. Ischenko, S. Polarz, D. Grote, V. Stavarache, K. Fink and M. Driess, Adv.
Funct. Mater., 2005, 15, 1945-1954. 172. Y. W. Heo, D. P. Norton and S. J. Pearton, J. Appl. Phys., 2005, 98, -.
![Page 162: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/162.jpg)
162
173. A. Janotti and C. G. Van de Walle, Phys. Rev. B, 2007, 76, 165202. 174. U. Malm, J. Malmstrom, C. Platzer-Bjorkman and L. Stolt, Thin Solid Films, 2005,
480, 208-212. 175. J. K. Lee, W. L. Ma, C. J. Brabec, J. Yuen, J. S. Moon, J. Y. Kim, K. Lee, G. C.
Bazan and A. J. Heeger, J. Am. Chem. Soc., 2008, 130, 3619-3623. 176. P. A. Lane, S. Chen and F. So, Journal of Photonics for Energy, 2011, 1, 011020. 177. D. C. Olson, Y. J. Lee, M. S. White, N. Kopidakis, S. E. Shaheen, D. S. Ginley, J.
A. Voigt and J. W. P. Hsu, J. Phys. Chem. C, 2008, 112, 9544-9547. 178. C. E. Small, S. Chen, J. Subbiah, C. M. Amb, S. W. Tsang, T. H. Lai, J. R.
Reynolds and F. So, Nat. Photon., 2012, 6, 115-120. 179. B. P. Rand, D. P. Burk and S. R. Forrest, Phys. Rev. B, 2007, 75, 115327. 180. D. Veldman, O. Ipek, S. C. J. Meskers, J. Sweelssen, M. M. Koetse, S. C.
Veenstra, J. M. Kroon, S. S. van Bavel, J. Loos and R. A. J. Janssen, J. Am. Chem. Soc., 2008, 130, 7721-7735.
181. A. Cravino, Appl. Phys. Lett., 2007, 91, 243502. 182. K. Vandewal, K. Tvingstedt, A. Gadisa, O. Inganas and J. V. Manca, Nat. Mater.,
2009, 8, 904-909. 183. Z. L. Guan, J. B. Kim, H. Wang, C. Jaye, D. A. Fischer, Y. L. Loo and A. Kahn,
Org. Electron., 2010, 11, 1779-1785. 184. E. L. Ratcliff, J. Meyer, K. X. Steirer, N. R. Armstrong, D. Olson and A. Kahn, Org.
Electron., 2012, 13, 744-749. 185. K. Tvingstedt, K. Vandewal, A. Gadisa, F. L. Zhang, J. Manca and O. Inganas, J.
Am. Chem. Soc., 2009, 131, 11819-11824. 186. W. Gong, M. A. Faist, N. J. Ekins-Daukes, Z. Xu, D. D. C. Bradley, J. Nelson and
T. Kirchartz, Phys. Rev. B, 2012, 86, 024201. 187. U. Rau, Phys. Rev. B, 2007, 76, 085303. 188. J. Nelson, J. Kirkpatrick and P. Ravirajan, Phys. Rev. B, 2004, 69, 035337. 189. M. Gruber, J. Wagner, K. Klein, U. Hörmann, A. Opitz, M. Stutzmann and W.
Brütting, Adv. Energy Mater., 2012, 2, 1100-1108.
![Page 163: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/163.jpg)
163
190. G. Garcia-Belmonte, P. P. Boix, J. Bisquert, M. Sessolo and H. J. Bolink, Sol. Energy Mater. Sol. Cells, 2010, 94, 366-375.
191. K. K. H. Chan, S. W. Tsang, H. K. H. Lee, F. So and S. K. So, Org. Electron.,
2012, 13, 850-855. 192. R. Klenk, Thin Solid Films, 2001, 387, 135-140. 193. A. Horvath, H. Bassler and G. Weiser, Phys. Status Solidi B., 1992, 173, 755-764. 194. Z. Shen, P. E. Burrows, S. R. Forrest, M. Ziari and W. H. Steier, Chem. Phys.
Lett., 1995, 236, 129-134. 195. A. Horvath, G. Weiser, G. L. Baker and S. Etemad, Phys. Rev. B, 1995, 51,
2751-2758. 196. M. H. Tong, N. E. Coates, D. Moses, A. J. Heeger, S. Beaupre and M. Leclerc,
Phys. Rev. B, 2010, 81, 125210. 197. I. H. Campbell, T. W. Hagler, D. L. Smith and J. P. Ferraris, Phys. Rev. Lett.,
1996, 76, 1900-1903. 198. A. A. Bakulin, D. Martyanov, D. Y. Paraschuk, P. H. M. v. Loosdrecht and M. S.
Pshenichnikov, Chem. Phys. Lett., 2009, 482, 99-104. 199. J. H. Burroughes, C. A. Jones and R. H. Friend, Nature, 1988, 335, 137-141. 200. F. Etzold, I. A. Howard, N. Forler, D. M. Cho, M. Meister, H. Mangold, J. Shu, M.
R. Hansen, K. Mullen and F. Laquai, J. Am. Chem. Soc., 2012, 134, 10569-10583.
201. Y. M. Sun, C. J. Takacs, S. R. Cowan, J. H. Seo, X. Gong, A. Roy and A. J.
Heeger, Adv. Mater., 2011, 23, 2226-+. 202. R. Stalder, C. Grand, J. Subbiah, F. So and J. R. Reynolds, Polym Chem-Uk,
2012, 3, 89-92. 203. D. Gendron, P. O. Morin, P. Berrouard, N. Allard, B. R. Aich, C. N. Garon, Y. Tao
and M. Leclerc, Macromolecules, 2011, 44, 7188-7193. 204. S. Westenhoff, I. A. Howard and R. H. Friend, Phys. Rev. Lett., 2008, 101,
016102. 205. V. May and O. Kuhn, eds., Charge and Energy Transfer Dynamics in Molecular
Systems, Wiley, Berlin, 2000.
![Page 164: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/164.jpg)
164
206. E. Hennebicq, G. Pourtois, G. D. Scholes, L. M. Herz, D. M. Russell, C. Silva, S. Setayesh, A. C. Grimsdale, K. Mullen, J. L. Bredas and D. Beljonne, J. Am. Chem. Soc., 2005, 127, 4744-4762.
207. M. Lax, J. Chem. Phys., 1952, 20, 1752-1760. 208. T. H. Keil, Phys. Rev., 1965, 140, A601. 209. J. L. Bredas, J. Cornil and A. J. Heeger, Adv. Mater., 1996, 8, 447.
![Page 165: By SONG CHEN - University of Floridaufdcimages.uflib.ufl.edu/UF/E0/04/48/92/00001/CHEN_S.pdf · By SONG CHEN A DISSERTATION PRESENTED TO THE GRADUATE SCHOOL ... would like to thank](https://reader035.vdocuments.mx/reader035/viewer/2022062917/5ed712a462136e72fb7bc8ce/html5/thumbnails/165.jpg)
165
BIOGRAPHICAL SKETCH
Song Chen was born in Suzhou, a beautiful city in eastern China, in 1985. In 2004,
he finished his high school study in Suzhou Middle School and entered one of the top
universities in China—Nanjing University (NJU) for his college study.
In 2008, he graduated with a Bachelor of Science degree from the Department of
Materials Science and Engineering with an honor of Dean Scholarship in 2007 due to
his outstanding academic performance. In the fall of the same year, he continued his
graduate study in United States. Under the supervision of Prof. Franky So, he chose the
topic of device physics of polymer solar cells. During the 4-year PhD career, he studied
carrier transport, bimolecular recombination, interfacial engineering and energy
alignment of polymer solar cells. More than 10 peer-reviewed papers were published on
high-impact journals such as Nature Photonics, Journal of American Chemical Society
and Advanced Energy Materials. 10 presentations, including 5 oral presentations, were
given in the conferences of Material Research Society (MRS), SPIE and International
Conference on Science and Technology of Synthetic Metals (ICSM). In December
2012, he received his degree of Doctor of Philosophy in the Department of Materials
Science and Engineering at the University of Florida.