border gateway protocol

46
© J. Liebeherr, All rights reserved 1 Border Gateway Protocol This lecture is largely based on a BGP tutorial by T. Griffin from AT&T Research.

Upload: grant-mcfarland

Post on 31-Dec-2015

24 views

Category:

Documents


1 download

DESCRIPTION

Border Gateway Protocol. This lecture is largely based on a BGP tutorial by T. Griffin from AT&T Research. Internet Infrastructure. Internet Infrastructure. Location where a network (ISP, corporate network, or regional network) gets access to the Internet is called a Point-of-Presence (POP). - PowerPoint PPT Presentation

TRANSCRIPT

© J. Liebeherr, All rights reserved1

Border Gateway Protocol

This lecture is largely based on a BGP tutorial by T. Griffin from AT&T Research.

2

Internet Infrastructure

local ISP(Tier 3)

campusnetwork

corporatenetwork

IXP

RegionalNetwork(Tier 2)

RegionalNetwork(Tier 2)

local ISP(Tier 3)

local ISP(Tier 3)

IXP

IXP

Backbone Network(Tier 1)

Backbone Network(Tier 1)

RegionalNetwork(Tier 2)

RegionalNetwork(Tier 2)

3

Internet Infrastructure

• Location where a network (ISP, corporate network, or regional network) gets access to the Internet is called a Point-of-Presence (POP).

• Locations where Tier-1 or Tier-2 networks exchange traffic are called peering points.– Public peering: Traffic is swapped in a specific location,

called Internet exchange points (IXPs)– Private peering: Two networks establish a direct link to

each other.

IXP – Internet exchange point

• Outside:

4

• Inside:

Backbone Network of a Tier-1 Provider (USA)

5

Global Map of Tier-1 Provider

6

7

Review: Autonomous Systems

• An autonomous system (AS) is a region of the Internet that is administered by a single entity and that has a unified routing policy

• Each autonomous system is assigned an Autonomous System Number (ASN).

• UofT’s campus network (AS239) • Rogers Cable Inc. (AS812)• Sprint (AS1239, AS1240, AS 6211, …)

• Interdomain routing is concerned with determining paths between autonomous systems (interdomain routing)

• Routing protocols for interdomain routing are called exterior gateway protocols (EGP)

8

Review: Interdomain and Intradomain Routing

• Routing protocols for intradomain routing are called interior gateway protocols (IGP)– Objective: shortest path

• Routing protocols for interdomain routing are called exterior gateway protocols (EGP)– Objective: satisfy policy of the AS

AS 6 AS 7

AS 4

AS 2 AS 5

AS 1

AS 3

Number of Autonomous Systems

9

10

EGP and IGP

• Interior Gateway Protocol– Routing is done based on metrics– Routing domain is one autonomous system

• Exterior Gateway Protocol– Routing is done based on policies– Routing domain is the entire Internet

EGP (e.g., BGP)

AS 2 AS 2

IGP (e.g., OSPF)IGP (e.g., RIP)

11

EGP

• Interdomain routing is based on connectivity between autonomous systems

• Interdomain routing can ignore many details of router interconnection

AS 1 AS 2

AS 3

12

AS Graphs

From: T. Griffin, BGP Tutorial

AT&T North America

13

Multiple Routing Protocols

• Multiple routing protocols can run on the same router

• Each routing protocol updates the routing table

routingtable

IP Forwarding

routing tablelookup

incoming IP datagrams

outgoing IP datagrams

routing protocol

routing protocol

RIP Process

OSPFProcess

BGP Process

routing table updates

14

Autonomous Systems Terminology

• local traffic = traffic with source or destination in AS

• transit traffic = traffic that passes through the AS• Stub AS = has connection to only one AS, only

carry local traffic• Multihomed Stub AS = has connection to >1 AS, but does

not carry transit traffic• Transit AS = has connection to >1 AS and

carries transit traffic

15

Stub and Transit Networks

Settings:• AS 1 is a multi-homed stub network• AS 3 and AS 4 are transit networks• AS 2 and AS 5 are is a stub networks

AS 3

AS 1 AS 2

AS 4

AS 5

16

Selective Transit

Example:• AS 3 carries traffic

between AS 1 and AS 4 and between AS 2 and AS 4

• But AS 3 does not carry traffic between AS 1 and AS 2

• The example shows a routing policy.

AS 2AS 1

AS 3

AS 4

17

Customer/Provider and Peers

• A stub network typically obtains access to the Internet through a transit network.

• Transit network that is a provider may be a customer for another network

• Customer pays provider for service

AS 5

AS 2

Customer/Provider

AS 7

Customer/Provider

AS 8

Customer/Provider

AS 4

Customer/Provider

AS 6

Customer/Provider

18

Customer/Provider and Peers

• Transit networks can have a peer relationship• Peers provide transit between their respective customers• Peers do not provide transit between peers• Peers normally do not pay each other for service

AS 3

AS 5

AS 2Peers

Customer/Provider

AS 7

Customer/Provider

AS 1Peers

AS 8

Customer/Provider

AS 4

Customer/Provider

AS 6

Customer/Provider

19

Shortcuts through peering

• Note that peering reduces upstream traffic• Delays can be reduced through peering• But: Peering may not generate revenue

AS 3

AS 5

AS 2Peers

Customer/Provider

AS 7

Customer/Provider

AS 1Peers

AS 8

Customer/Provider

AS 4

Customer/Provider

AS 6

Customer/Provider

Peers

20

Border Gate Protocol (BGP)

• Border Gateway Protocol is the interdomain routing protocol for the Internet for routing between autonomous systems

• Currently in version 4 (1995)– Network administrators can specify routing policies– BGP is a path vector protocol (Like distance vector, but

routing messages in BGP contain complete routes)• Uses TCP to transmit routing messages

21

Border Gate Protocol (BGP)

• An autonomous system uses BGP to advertise its network address(es) to other AS’s

• BGP helps an AS to:

1. Learn about reachable networks from neighboring AS’s

2. Distribute the information about reachable networks to routers inside the AS

3. Select a route if there are multiple routes to reach the same network

22

BGP Message Types

• Open: Establishes a peering session

• Notification: Closes a peering session

• Keep Alive: Handshake at regular intervals to

maintain peering session

• Update: Announces new routes or withdraws

previously announced routes.

Each announced route is specified as a network prefix with

attribute values

23

BGP interactions

AS 2

AS 1

AS 3

• The networks that are advertised are network IP addresses with a prefix, E.g., 128.100.0.0/16

Prefixes reachable from AS 1

Prefixes reachablefrom AS 3

24

BGP interactions

• BGP is executed between two routers

– BGP session

– BGP peers or BGP speakers

• Procedure:

1. Establishes TCP connection (port 175) to BGP peer

2. Exchange all BGP routes

3. As long as connection is alive: Periodically send incremental updates

• Note: Not all autonomous systems need to run BGP. On many stub networks, the route to the provider can be statically configured

AS 1

AS 2

BGP Session

25

BGP interactions

• BGP peers advertise reachability of IP networks

• A advertises a path to a network (e.g., 10.0.0.0/8) to B only if it is willing to forward traffic going to that network

• Path-Vector:– A advertises the complete

path AS A, …., AS X

this avoids loops

A

B

Advertisepath to 10.0.0.0/24

10.0.0.0/24

BGP Peer

BGP Peer

26

BGP Sessions

• External BGP session (eBGP):Peers are in different AS’es

• Internal BGP session (iBGP)Peers are in the same AS

• Note that iBGP sessions use routes constructed by an intradomain routing protocol to exchange messages !

AS B

iBGP session

eBGP session

AS A

27

iBGP sessions

• All iBGP peers in the same autonomous system are fully meshed

• Peer announces routes received via eBGP to iBGP peers

• But: iBGP peers do not announce routes received via iBGP to other iBGP peers

Update from eBGP session

AS A

28

Route Reflectors

• Full mesh of iBGP routers is difficult to maintain

• Router Reflectors (RR) present an alternative

• All iBGP routers peer with the RR– RR acts as a server– Other iBGP routers become

clients

Update from eBGP session

AS A

RR

29

Content of Advertisements

• A BGP routers route advertisement is sent in a BGP UPDATE message

• A route is announced as a Network Prefix and Attributes

• Attributes specify details about a route:– Mandatory attributes:

ORIGIN

AS_PATH

NEXT_HOP

– many other attributes

30

ORIGIN attribute

• Originating domain sends a route with ORIGIN attribute

AS 1

AS 2 AS 4

AS 5

AS 3

10.0.1.0/24, ORIGIN {1}

10.0.1.0/24, ORIGIN {1}

10.0.1.0/24, ORIGIN {1}

10.0.1.0/24, ORIGIN {1}

10.0.1.0/24, ORIGIN {1}

AS 1

AS 2 AS 4

AS 5

AS 3

31

AS-PATH attributes

• Each AS that propagates a route prepends its own AS number– AS-PATH collects a path to reach the network prefix

• Path information prevents routing loops from occuring• Path information also provides information on the length of a path (By

default, a shorter route is preferred)• Note: BGP aggregates routes according to CIDR rules

10.0.1.0/24, AS-PATH {2,1}

10.0.1.0/24, AS-PATH {3,1}

10.0.1.0/24, AS-PATH {4,2,1}

10.0.1.0/24, AS-PATH {1}

10.0.1.0/24, AS-PATH {1}

AS 1

AS 2 AS 4

AS 5

AS 3

32

NEXT-HOP attributes

• Each router that sends a route advertisement it includes its own IP address in a NEXT-HOP attribute

• The attribute provides information for the routing table of the receiving router.

AS 5 AS 1

AS 3

128.100.11.1 128.143.71.21

10.0.1.0/24, NEXT-HOP {128.100.11.1}

10.0.1.0/24, NEXT-HOP {128.143.71.21}

33

Connecting NEXT-HOP with IGP information

AS 1

AS 3

128.100.11.1/24 192.0.1.2

eBGP

iBGP

R1IGP router

10.0.1.0/24, NEXT-HOP {128.100.11.1}

10.0.1.0/24, NEXT-HOP {128.100.11.1}

Dest. Next hop128.100.11.0/24 192.0.1.2

At R1:

Dest. Next hop10.0.1.0/24 128.100.11.1

Routing table

BGP info

Dest. Next hop128.100.11.0/24 192.0.1.2

10.0.1.0/24 192.0.1.2

Routing table

34

Route Selection

• An AS may get more than one route to an address

• Needs to select a route

Route Selection Criteria (in order of preference)• Highest Local Preference• Shortest AS-Path• Lowest MED (multi-exit discriminator) ( called “metric” in BGP)• Prefer iBGP over eBGP routes• Lowest IGP cost to leave AS (“hot potato”)• Lowest router ID ( used as tie breaker)

AS 1

Advertise path to 10.0.1.0/24AS 1

Advertise path to 10.0.1.0/24

AS 3

AS 2

AS 4

Advertise path to 10.0.1.0/24

Advertise path to 10.0.1.0/24

AS 1

Advertise path to 10.0.1.0/24AS 1

Advertise path to 10.0.1.0/24

AS 3

AS 2

AS 4

Advertise path to 10.0.1.0/24

Advertise path to 10.0.1.0/24

35

Local Preference

• If there are multiple exit points from the AS, the local preference attribute is used to select the exit point for a specific route

• Local Preference is used only for iBGP sessions• Value is set locally

AS 1

Advertise path to 10.0.0.0/24AS 1

Advertise path to 10.0.0.0/24

AS 3

AS 2

AS 4

Advertise path to 10.0.0.0/24

Advertise path to 10.0.0.0/24

Local pref = 10

Local pref = 50

Local pref = 100

Local pref = 80

36

Hot Potato Routing

• Router R3 in autonomous system A receives two advertisements to AS A– Which route should it pick?

• Hot Potato Rule: Select the iBGP peer that has the shortest IGP route

• Analogy: Get the packet out of one’s own AS as quickly as possible, i.e., on the shortest path

Route to X

AS A

R1

Route to X

R2

Route to X Route

to X

R3

37

Hot Potato Routing

Finding the cheapest IGP route:• Compare the cost of the two

paths– R3 R1 – R3 R2

according to the IGP protocol

• Here: R1 has the shortest path

• Add a routing table entry for destination X

Route to X

AS A

R1

Route to X

R2

Cost=6

R3

Cost=23

38

Hot Potato Routing can backfire!

• AS1 would serve its customer (source) better by not picking the shortest route to AS 2

• In fact, customer may have paid for a high-bandwidth service!

AS 2

AS 1

Low bandwidth network

Cost=20

Destination

Source

Cost=5

High bandwidth network

39

Processing in BGP

Apply Import Rules

Select Best Route

Update IP routing table

Apply Export Rules

IP routing table

BGP updates arrive

Filter routes and change attributes

Based on attributes

Best entry is entered in IP routing table

Filter routes and change attributes

BGP updates arrive

40

Importing and Exporting Routes

• An AS may not accept all routes that are advertised

• An AS may not advertise certain routes

• Route policies determines which routes are filtered

• If an AS wants to have less inbound traffic it should adapt its export rules

• If an AS wants to control its outbound traffic, it adapts its import rules

Control Inbound

traffic

AS A

Change export rules

Change import rules

Control Outbound

traffic

41

Routing Policies

• Since AS 5 is a stub network it should not advertise routes to networks other than networks in AS 5

• When AS 3 learns about the path {AS1, AS4}, it should not advertise the route {AS3, AS1, AS4} to AS 2.

AS 1

AS 3

AS 5

AS 2

Peers

Customer/Provider

Peers

Customer/Provider

AS 4

AS 6

Peers

Customer/Provider

42

Traffic Often Follows ASPATH

• In many cases, packets are routed according to the AS-PATH

• However, in some cases this is not true

(Here: AS 2 filters routes with a long prefix)

AS 2 AS 5AS 3AS 1128.100.0.0/16

128.100.0.0/16, AS-PATH {3,2,1}

AS 2 AS 5AS 3AS 1128.100.0.0/16

128.100.0.0/16, AS-PATH {3,2,1}

AS 4

128.100.22.0/24, AS-PATH {4}

128.100.22.0/24

128.100.0.0/16, AS-PATH {1}

128.100.0.0/16, AS-PATH {2, 1}

Does not advertise /24 networks

43

Short AS-PATH does not mean that route is short

• From AS 6’s perspective – Path {AS2, AS1} is short– Path {AS5, AS4, AS3, AS1} is

long

• But the number of traversed routers is larger when using the shorter AS-PATH

AS 1

AS 3

AS 4

AS 5

AS 2

AS 6

44

BGP Table Growth

Source: Geoff Huston. http://www.telstra.net/ops/bgptable.html on August 8, 2001

45

BGP Table Growth

Source: bgp.potaroo.net, 2010

46

BGP Issues

• BGP is a simple protocol but it is very difficult to configure

• BGP has severe stability issue due to policies BGP is known to not converge

• As of July 2005, 39,000 AS numbers (of available 64,510) are consumed