beauty takes root
TRANSCRIPT
Product Presentation
Available in:
01C2600 - 2x9g automix syringe Bleach White
01C2601 - 2x9g automix syringe Natural
01C2605 - Replacement Kit (20 dispensing tips and 20 intraoral tips) Beauty takes root
800 872 8305 • www.septodontna.com • 205 Granite Run Drive, Suite 105, Lancaster, PA 17601
DimerCore_US_Layout 1 5/4/12 2:38 PM Page 1
N’Durance® Dimer Core is based on Septodont’s patented Nano-Dimer Technology, offering extra
biocompatibility and durability.
N’Durance® Dimer Core provides a solid and durable core underthe crown while making your procedure simpler and faster.
Physical Properties Lower flexural modulus of 5.5 GPa
- Optimizes stress absorption and distribution
throughout the tooth
- Ensures good fracture resistance of the core against
chewing forces
- Maintains the integrity of the crown cementation
- Provides toughness and flexibility for extra durability of
the restoration
Up to 82% monomer conversion for less
residual acidic monomers- Reduced pulpal stress when the crown is placed on a vital tooth
- Less risk of maintaining an acidic pH, favorable to bacterial development causing secondary decay
N’Durance® Dimer Core is extremely hydrophobic and non-soluble- Preserves the functional integrity of the core
- 0.00 µm solubility
- 9.39 µm water sorption
Solid and Durable Core under the Crown
N’DuranceDimer Core Nat
Core Paste XP
Luxacore
Paracore
CoreX Flow
Luxacore Z
0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00
8.31
7.94
7.76
7.54
6.00
5.53
4
N’DuranceDimer Core Nat
CoreX Flow
Luxacore Z
Luxacore
CorePaset XP
Paracore
0.00 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90
0.81
0.39
7.76
7.54
6.00
0.00
Solubility (µg/mm3)Light Cured
0.00
0.00
0.00
0.00
N’DuranceDimer Core Nat
Core Paste XP
Luxacore
CoreX Flow
LuxacoreZ
Paracore
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00
17.42
17.34
14.92
14.85
9.76
9.39
Water sorption (µg/mm3)Light Cured
Convenient Clinical Application
Patented Nano-Dimer TechnologyProprietary resin matrix including
breakthrough Dimer Acid monomers
offering increased Biocompatibility:
- Bis-GMA free formulation
- Less elution of residual monomers
Flexural Modulus (GPa) - Dual Cured
Cuts like Dentin- Ensures an easy, precise and controlled preparation
Proven lowest weight loss after cutting - Higher cutting resistance than other core
build-up materials
- Reduces the risk of overcuts
Excellent flowable viscosity for easy placement- Good adaptation to the cavity walls, especially in cases
with undercuts
- Superior handling - doesn’t slump
Available in 2 shades to adapt to all clinical situations- Natural shade to blend with the surrounding dental tissues and
to mask out metal posts
- Bleach White shade for a higher contrast with the tooth for an
easy margin preparation
The thin tips dispense a void-free consistent mix with no air bubbles- 1:1 base/catalyst mix ratio
N’DuranceDimer Core Nat
Luxacore
Core Paste XP
Absolute Dentin
Fuji IX(Glass Ionomer)
Valiant (Amalgam)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
4.00
3.4
0.8
0.7
0.5
0.3
Dual Cure Fast single step procedure
- Up to 3.6 mm depth of cure for bulk placement technique
- Light cure for 20 seconds and allow the self cure to finalize
the polymerization, or light cure for 40 seconds for immediate
final polymerization. Use a 400 mW/cm2 curing light
- Chemical cure to guarantee hardness where the curing light
does not reach
- Working time: 2 min. 30 sec. - Setting time: 4 min.
Radiopaque for convenient short and long term follow-up
Available in automix syringe- Fast and homogenous mix of the material
- Rapid and direct placement
Time savings for You and Your Patient
N’DuranceDimer Core Nat
Luxacore
CoreX Flow
Core Paste XP
Luxacore Z
Paracore
4
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
1.35
2.12
2.40
2.60
2.72
3.61
Sourc
e: S
ep
tod
ont
inte
rnal d
ata
, d
ata
on file
Sourc
e:
Univ
ers
ity
of A
lab
am
a,
US
A
Weight loss (%) after cutting
Depth of Cure (mm)
Sourc
e: S
ep
tod
ont
inte
rnal d
ata
, d
ata
on file
Sourc
e: S
ep
tod
ont
inte
rnal d
ata
, d
ata
on file
Sourc
e:
Sep
tod
ont
inte
rnal d
ata
, d
ata
on file
DimerCore_US_Layout 1 5/4/12 2:38 PM Page 3