Be free

ENDODONTIC MOTORENDODONTIC MOTOR

+

Freedom in

endodonticsCOMPATIBLE WITH ALL MAJOR FILE MANUFACTURERS. ACCESS TO FUTURE ENDODONTICS INSTRUMENTS INNOVATIONS.

The I-Endo dual is the first unit having an encoder coupled with an accurate micro-motor.

This patented encoder calculates an algorithm ensuring:

- In rotating mode high speedspeed accuracy.

- In reciprocating (F+R) mode an exact angle measurement angle measurement for:

- Evaluating the angular position with tolerance limits under 1°,

- Getting the best performances for each file system.

SATELEC SATELEC ExclusivityExclusivity

Encoder

256 positions analyzed

Signal

Analysis of:128 positions (forward)128 positions (reverse)

SATELEC ExclusivitySATELEC Exclusivity

Precision and rapidityPrecision and rapidity

Versatile, complete, light and compact, the I-ENDO dual

offers

a new vision of endodontics.

EncoderThe encoder calculates an algorithm for greater precision,

Integrated calibration systemThe integrated calibration system checks the contra-angle’s mechanical inertia for a perfect micro-motor/contra-angle adjustment.

MicroprocessorAdvanced microprocessor for an extremely short response time.

Techniques comparisonTechniques comparison

Freedom in endodonticsFreedom in endodontics

Rotating movement

Reciprocating movement

Both modes are compatible with all systems and files

from all major suppliers. All parameters can be

easily modified to have access to future endodontics

instruments innovations. Vers

ati

lV

ers

ati

lee

Freedom in endodonticsFreedom in endodontics

10 customizable automatically saved programs available in each 10 customizable automatically saved programs available in each mode.mode.

Ratio 5 contra-angle ratio settings (1:1 ; 6:1 ; 16:1 ; 20:1 ; 32:1)

SpeedSpeed without contra-angle: 1000 to 10 000 RpmSpeed with a 16 :1 contra-angle: 100 to 600 RpmSpeed with a 6 :1 contra-angle: 150 to 1660 Rpm

 TorqueTorque with a 16:1 contra-angle: 0.5 to 10 Ncm (MAX)Torque with a 6:1 contra-angle : de 0.5 à 4.1 Ncm (MAX) 

FWD° REV°Dedicated to reciprocating (F+R) modeAdjustment from 10° à 360° in forward and in reverse motion

ROTATING MOVEMENTROTATING MOVEMENT

Large choice of torque, speed and ratios settings to fit with all

manufacturers specifications.

A LCD back lighted display offers higher visibility for instantaneous recognition of micromotor status and

settings.

Pre-settings: Recommanded settings:

(ex. using ProTaper S1) CA = 16:1

Rpm = 250 Torque = 4.0 Ncm

Rotating movementRotating movement

Rotating functionsRotating functions

Rotating movementRotating movement

With « Rotating Movement » the torque could be with a 16:1 contra-angle:

Conventional settings ( ex. using ProTaper S1 ) : CA = 16:1Rpm = 250

Torque = 4.0 Ncm

N.cm0.5 1.0 1.5 2.5 4.0 MAX

Max Torque with 16:1 Contra Angle = 10 Ncm

Rotating movementRotating movement

TorqueTorqueTorqueTorque

SpeedSpeedSpeedSpeed

When file reaches the set torque value, the motor runs reverse until the motor has been stopped. Next start will be in Forward.

The motor handpiece stops without reverse rotation.

When file reaches the set torque value, the motor runs reverse until the file is freed andAutomatically returns to Forward.

STP - “STOP” Autoreverse

AR – “Standard” Autoreverse

SAR - “Special” Autoreverse

Beeping sound notifies user when 75% of the preset torque has been reached and when preset torque limit has been exceeded.

Rotating movement-Rotating movement-

The time from « x » to « y » must be as short as possible

(less than 1/1000 sec. )

Microprocessor analysis

Between X and Y, the torque is increasing progressively

until MAX value

Rotating movementRotating movement

RECIPROCATING MOVEMENTRECIPROCATING MOVEMENT

Reciprocating movement Reciprocating movement

Forward = a large rotating angle less than 360° in the cutting

direction provides high efficiency.

Reverse = a smaller rotating angle less than the angle set in Forward

allow the file to safety progress inside the canal.

Reciprocating movement Reciprocating movement

Major Advantages

With F+R Movement the torque is always: MAX

MAX torque with 16:1 contra-angle: 10NcmTorque is irrelevant in this mode

Angles variation from 10° to 360° every 5°.

Reciprocating movement Reciprocating movement

Pre-settings

TorqueTorqueTorqueTorque

SpeedSpeedSpeedSpeed

AnglAngl

eeAnglAngl

ee

ProtocolProtocol

Canal preparation using only one Ni-Ti rotary instrument: preliminary observations. G. YARED, International Endodontic journal, 2007.

Files - Reciprocating

Wave one /Reciproc®:

Reciprocating dedicated system from VDW

Unclockwise spiral

Fixed angulations: 150° - 30°

Single use

SALES ARGUMENTS

SUM UP

I-ENDO dual Benefitscompared to the competition

I-ENDO dual Vs Wave one/Reciproc

BIBLIOGRAPHY

Bibliography

Bibliography

ENDODONTIC MOTORENDODONTIC MOTOR

Be free

-기존에 사용하던 파일 (protaper, Mtwo, k3 등 ) 로 reciprocating 가능

- 파일의 수명 (fatigue fracture) 을 2 배 이상 연장 ( 파일의 소모비용 감소 )

-Transportation 의 최소화로 인해 충전시 최상의 조건을 만들어줌

-Reciprocating 이 가능하여 안전한 근관확대 (torsion fracture 감소 )

-유저가 원하는 reciprocate 의 각도조절 가능

-Rotating, reciprocating 각 모드에서 10 개의 프로그래밍 가능

-1 년간 무상 A/S

i-endo dual 의 특장점