bare die, chip scale and wafer scale package handling · entegris,inc. 1 bare die, chip scale...

BARE DIE, CHIP SCALE AND WAFERSCALE PACKAGE HANDLING

For online ordering, visit Entegris’website at www.devicecare.com

ENTEGRIS, INC. 1

BARE DIE, CHIP SCALE AND WAFER SCALE PACKAGE HANDLING

OverviewEntegris offers a wide selection of products to meetyour specific bare die, chip scale and wafer scalepackage shipping and handling needs. Products aredesigned and manufactured to provide reliableoperation and superior device protection whileminimizing your shipping and storage costs.

Table of ContentsSection 1: H20 Series (2˝) Products . . . . . . . . . . . . . . . 2

Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Section 2: CT3 Series (3˝) Products . . . . . . . . . . . . . . 28Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Section 3: H44 Series (4˝) Products . . . . . . . . . . . . . . 30Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Specialized CSP Products . . . . . . . . . . . . . . . . . . 39Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Section 4: Additional Products . . . . . . . . . . . . . . . . . . 44Film Frame Shippers . . . . . . . . . . . . . . . . . . . . . . 45Horizontal Wafer Shippers . . . . . . . . . . . . . . . . . 45Other Related Products . . . . . . . . . . . . . . . . . . . . 45

Section 5: Technical Information . . . . . . . . . . . . . . . . 46Online Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 47Entegris Regional Customer Service Centers . . . 47DeviceCare® Services . . . . . . . . . . . . . . . . . . . . . 47Technical Service . . . . . . . . . . . . . . . . . . . . . . . . 47Material Information . . . . . . . . . . . . . . . . . . . . . 48Fax It Form for Custom Trays . . . . . . . . . . . . . . 50Index by Part Number . . . . . . . . . . . . . . . . . . . . . 51Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Material Color Chart . . . . . . . . . . . . . . . . . . . . . . 53

Fast, reliable solutions are just a click away atEntegris’ website, www.devicecare.com. Selectand order anytime of the day or night from ourcomprehensive offering of low-cost packagingsystems to protect and transport microelectronicdevices. It’s never been easier – or faster.

And, if you need a custom bare die tray quickly,i-Tray™ Designer allows you to design a tray toyour exact requirements, create a drawing andorder at the click of a button.

When you need the right product, right now,visit Entegris’ website at www.devicecare.com.

For assistance with your specific productand application issues, contact your

Entegris Regional Customer Service Center listedon the ”Customer Service” page of our website at

www.entegris.com

2 ENTEGRIS, INC.

BARE DIE, CHIP SCALE AND WAFER SCALE PACKAGE HANDLING Section1:H

20Series

(2”)Products



www.entegris.com

Section 1:H20 Series (2˝)ProductsH20 Series Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Sizes and Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Part Number System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21


Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Antistatic Tray Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Spring Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Storage Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Tray Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Removable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Chip Tray/Die Transfer Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Chip Washing/Jig Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Cleaning Fixture/Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Jig Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3 ENTEGRIS, INC.


H20 Series (2˝) ProductsEntegris offers a wide selection of H20 series 2˝ squaretrays, covers and accessories to meet your changingneeds. H20 series trays are available in various pocketsizes and depths, with or without wash holes andtweezers slots.

TraysEntegris’ H20 series products offer proven reliabilityfor handling bare die, including:

• Known Good Die (KGD)

• Wafer Scale Packaging (WSP)

• Chip Scale Packaging (CSP)

• Flip chip

• Bump die

• Opto electronics

• Passive and active chip components

• Mechanical components




Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 4


Cataloged Tray – Standard MaterialEntegris offers many popular trays in variousstandard materials as listed in the “StandardMaterials” column. The following orderingpolicies apply:

• Minimum order quantity 300 pieces, thereafterin quantities of 100 pieces

• Shipment from stock or within four weeks afterreceipt of order (see www.devicecare.com foravailability)

Cataloged Tray – Nonstandard MaterialAdditional material options may be available forcataloged trays. Material options not listed in the“Standard Materials” column for each tray arespecials requiring the following ordering policies:

• Minimum order quantity 2,000 pieces, thereafterin quantities of 100 pieces

• Minimum order quantity reduced to 300 pieceswith a set-up charge

• Shipment within four weeks after receipt of order

Noncataloged TrayEntegris offers many tray designs other thanthose listed in the catalog. Visit Entegris’ websiteat www.devicecare.com or contact an EntegrisTechnical Service Representative for informationon available noncataloged trays. The followingordering policies apply:




Custom Tray DesignEntegris offers custom trays designed to meetyour exact requirements. Visit Entegris’ websiteat www.devicecare.com or use the “Fax It Formfor Custom Trays” in the back of the catalog.You can also contact an Entegris Customer Servicerepresentative at +1 952-556-4181.

Special ordering policies apply.

Tray Sizes and TolerancesTray sizes and tolerances may vary by material. Provided below are dimensions and tolerances.

Dimensions and Tolerances

Material Description Code Overall Size (sq.) Overall Height Flatness

ABS Acrylonitrile -14XX 50.8 ±0.102 mm 3.96 +0.051 mm 0.102 mmButadiene styrene (2.000 ±0.004”) -0.076 mm (0.004”)with a color additive (0.156 +0.002”

-0.003”)

STAT-PRO® 150 Polypropylene -62C02 50.673 ±0.254 mm 3.937 +0.076 mm 0.305 mmwith carbon powder (1.995 ±0.010”) -0.127 mm (0.012”)and glass bead (0.155 +0.003”

-0.005”)

STAT-PRO 400 Alloy of ABS -74DXX 50.8 ±0.102 mm 3.96 +0.051 mm 0.102 mmand an intrinsically (2.000 ±0.004”) - 0.076 mm (0.004”)dissipative polymer (0.156 +0.002”

-0.003”)

ChipSentry® Polycarbonate -66C02 50.8 ±0.102 mm 3.96 +0.051 mm 0.102 mmSTAT-PRO 500 with carbon powder (2.000 ±0.004”) -0.076 mm (0.004”)

(0.156 +0.002”-0.003”)

Tray Ordering InformationH20 trays are sorted by pocket size. Simply look for the pocket size you want,find the options you require and select the material. Provide tray Part Number andmaterial code from the “Standard Materials” column. Please order in increments of 100as trays are packaged in lots of 100 trays after the minimum order quantity is met.

Section1:H

20Series

(2”)Trays

5 ENTEGRIS, INC.

BARE DIE, CHIP SCALE AND WAFER SCALE PACKAGE HANDLINGSe

ction1:

H20

Serie

s(2”)

Trays

Part Number SystemH20 - 015 - XXXXX

SeriesH20 = 50.8 mm × 50.8 mm

(2” × 2”)

H20E = 50.8 mm × 50.8 mm(2” × 2”) roughsurface finish (EDM)on pocket bottom

Design

Material14XX = ABS

(various colors)

62C02 = STAT-PRO 150black conductivepolypropylene

66C02 = ChipSentrySTAT-PRO 500black conductivepolycarbonate

74DXX= STAT-PRO 400static dissipativecolorable ABS

Color**01 = Amber*

02 = Black

03 = Blue

03L = Light blue

04 = Red

05 = Green

06 = Brown

07 = Yellow

08 = Gray

09 = Orange

10 = Tan

11 = Pink

12 = White*

15 = Natural*

21 = Purple

26 = Maroon* STAT-PRO 400 material not available in amber, white or natural color.** Refer to inside back cover for complete color chart.

ENTEGRIS, INC. 6


For latest product offerings and a comprehensive, up-to-datelist of products, go to www.devicecare.com

Pocket EDM Wash Hole Tweezer Pocket Part StandardPocket Size Depth Capacity Finish Size Slot Width Draft Number Materials

0.38 mm 0.23 mm 400 No NA NA 1–5° H20-015 -66C02(0.015” sq) (0.009”)

0.46 mm 0.23 mm 400 No NA NA 18.4° H20-018-09 -66C02(0.018” sq) (0.009”)

0.46 mm 0.30 mm 400 No NA NA 14° H20-018-12 -62C02*(0.018” sq) (0.012”) -66C02

0.56 mm 0.23 mm 484 No NA NA 6.3° H20-021 -66C02(0.022” sq.) (0.009”)

0.56 mm 0.30 mm 400 No NA NA 14° H20-021-12 -62C02*(0.022” sq.) (0.012”) -66C02

0.64 mm 0.25 mm 100 No NA NA 5° H20-024-10 -62C02(0.025” sq.) (0.010”)

0.66 mm 0.30 mm 400 No NA NA 20° H20-026-12 -66C02(0.026” sq.) (0.012”)

0.66 mm 0.38 mm 400 No NA NA 11.3° H20-026-15 -62C02*(0.026” sq.) (0.015”) -66C02

0.71 mm 0.20 mm 484 No NA NA 1–5° H20-028 -66C02(0.028” sq.) (0.008”)

0.76 mm 0.25 mm 400 No NA NA 1–5° H20-030-10 -1415(0.030” sq.) (0.010”) -62C02*

-66C02

0.76 mm 0.36 mm 400 No NA NA 1–5° H20-030-14 -62C02*(0.030” sq.) (0.014”) -66C02


0.76 mm 0.61 mm 400 No NA NA 1–5° H20-030-24 -62C02(0.030” sq.) (0.024”)

0.79 mm × 6.10 mm 0.38 mm 156 No NA NA 5° H20-031242 -62C02(0.031” × 0.240”) (0.015”)

0.89 mm 0.38 mm 400 No NA NA 18° H20-035 -1405(0.035” sq.) (0.015”) -62C02*

-66C02

0.89 mm 0.38 mm 400 No NA NA 1–5° H20-037-15 -66C02(0.035” sq.) (0.015”)

0.94 mm 0.48 mm 400 No NA NA 30° H20-037 -62C02(0.037” sq.) (0.019”)

*Pocket size may differ slightly from dimensions shown.

Section1:H

20Series

(2”)Trays

7 ENTEGRIS, INC.




1.02 mm 0.38 mm 100 No NA NA 11.3° H20-040-15 -66C02(0.040” sq.) (0.015”)

1.02 mm 0.41 mm 400 No NA NA 10.6° H20-039 -66C02(0.040” sq.) (0.016”)

1.02 mm 0.51 mm 400 No NA NA 1–5° H20-040 -62C02(0.040” sq.) (0.020”)

1.02 mm × 1.40 mm 0.61 mm 360 No NA NA 1–5° H20-040055 -62C02(0.040” × 0.055”) (0.024”)

1.14 mm 0.28 mm 400 No NA NA 1–5° H20-045 -1415(0.045” sq.) (0.011”) -62C02*

-66C02


1.14 mm × 1.73 mm 0.61 mm 252 No NA NA 1–5° H20-045068 -66C02(0.045” × 0.068”) (0.024”)

1.19 mm 0.51 mm 400 No NA NA 35° H20-047 -62C02(0.047” sq.) (0.020”)

1.27 mm 0.25 mm 100 No NA NA 35° H20-048 -62C02*(0.050” sq.) (0.010”) -66C02


1.27 mm . 0.61 mm 400 No NA NA 1–5° H20-050-24 -62C02*(0.050” sq.) (0.024”) -66C02

1.30 mm × 2.29 mm 0.64 mm 204 No NA NA 1–5° H20-051090 -1404(0.051” × 0.090”) (0.025”)

1.32 mm × 1.59 mm 0.51 mm 400 No NA NA 1–5° H20-052062 -66C02(0.052” × 0.062”) (0.020”)


1.50 mm × 1.17 mm 0.41 mm 400 No NA NA 1–5° H20-059046 -62C02(0.059” × 0.046”) (0.016”)Nonstandard pocket orientation.

1.50 mm × 3.99 mm 0.41 mm 128 No NA NA 1–5° H20-059157 -1415(0.059” × 0.157”) (0.016”)

1.52 mm 0.41 mm 400 No NA NA 1–5° H20-059 -1415(0.060” sq. ) (0.016”)


Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 8



1.52 mm 0.46 mm 400 No NA NA 1–5° H20-060-18 -1415(0.060” sq.) (0.018”) -62C02


1.52 mm × 2.79 mm 1.91 mm 108 No NA NA 1–5° H20-059109 -1415(0.060” × 0.110”) (0.075”)

1.55 mm × 1.40 mm 1.27 mm 306 No NA NA 1–5° H20-061055 -62C02(0.061” × 0.055”) (0.050”)

1.57 mm × 2.34 mm 0.61 mm 100 No NA NA 10° H20-060090 -62C02(0.062” × 0.092”) (0.024”)

1.57 mm × 2.34 mm 0.89 mm 100 No NA NA 10° H20-062092 -62C02(0.062” × 0.092”) (0.035”)

1.60 mm × 16.51 mm 0.41 mm 30 No NA NA 1–5° H20-063650 -62C02*(0.063” × 0.650”) (0.016”) -66C02


1.65 mm × 3.18 mm 0.64 mm 170 No NA NA 1–5° H20-065125 -62C02(0.065” × 0.125”) (0.025”)

1.70 mm × 3.30 mm 1.65 mm 126 No NA NA 1–5° H20-067130 -62C02(0.067” × 0.130”) (0.065”)

1.78 mm 0.28 mm 100 No NA NA 1–5° H20-070-11 -1401(0.070” sq.) (0.011”)


1.78 mm 0.61 mm 100 No NA NA 1–5° H20-070-24 -62C02(0.070” sq.) (0.024”)

1.78 mm 1.14 mm 100 No NA NA 1–5° H20-070-45 -62C02(0.070” sq.) (0.045”)

1.83 mm × 2.29 mm 0.46 mm 192 No NA NA 15° H20-072090 -62C02*(0.072” × 0.090”) (0.018”) -66C02

1.88 mm × 16.64 mm 0.76 mm 28 No NA NA 1–5° H20-074655 -62C02(0.074” × 0.655”) (0.030”)

1.91 mm 0.46 mm 324 No NA NA 1–5° H20-075-18 -66C02(0.075” sq.) (0.018”)

1.91 mm 0.61 mm 324 No NA NA 1–5° H20-075-24 -62C02(0.075” sq.) (0.024”)



Section1:H

20Series

(2”)Trays

9 ENTEGRIS, INC.




1.91 mm × 2.67 mm 1.14 mm 221 No NA NA 1–5° H20-073103 -62C02(0.075” × 0.105”) (0.045”)

1.91 mm × 3.81 mm 0.41 mm 170 No NA NA 1–5° H20-074149 -1405(0.075” × 0.150”) (0.016”)

1.98 mm × 2.79 mm 0.51 mm 154 No NA NA 1–5° H20-078110 -1407(0.078” × 0.110”) (0.020”) -66C02

2.01 mm 0.86 mm 100 No NA NA 1–5° H20-080 -1415(0.079” sq.) (0.034”) -62C02*

-66C02

2.03 mm 0.61 mm 169 No NA NA 1–5° H20-080-24 -62C02(0.080” sq.) (0.024”)

2.03 mm 1.27 mm 100 No NA NA 1–5° H20-080-50 -1415(0.080” sq.) (0.050”)

2.03 mm × 2.16 mm 0.89 mm 225 No NA NA 1–5° H20-080085 -66C02(0.080” × 0.085”) (0.035”)

2.03 mm × 5.69 mm 0.64 mm 90 No NA NA 1–5° H20-080225 -62C02(0.080” × 0.224”) (0.025”)


2.29 mm 0.41 mm 100 No NA NA 1–5° H20-090-16 -66C02(0.090” sq.) (0.016”)



2.29 mm × 2.41 mm 0.51 mm 256 Yes NA NA 1–5° H20E-090095 -62C02(0.090” × 0.095”) (0.020”)

2.29 mm × 2.69 mm 0.51 mm 100 No NA NA 1–5° H20-090106 -62C02(0.090” × 0.106”) (0.020”)

2.29 mm × 2.92 mm 0.51 mm 120 No NA NA 1–5° H20-091116 -62C02(0.090” × 0.115”) (0.020”)

2.29 mm × 2.92 mm 0.51 mm 180 No NA NA 30° H20-090115 -62C02(0.090” × 0.115”) (0.020”)

2.29 mm × 2.92 mm 1.14 mm 180 No NA NA 1–5° H20-089114 -62C02(0.090” × 0.115”) (0.045”)



Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 10



2.29 mm × 3.30 mm 0.51 mm 130 No NA NA 1–5° H20-090130 -1415(0.090” × 0.130”) (0.020”) -62C02*

2.39 mm × 2.64 mm 0.76 mm 210 No NA NA 1–5° H20-093103 -62C02(0.094” × 0.104”) (0.030”)

2.39 mm × 18.39 mm 0.64 mm 24 No NA NA 1–5° H20-094724 -62C02(0.094” × 0.724”) (0.025”)

2.41 mm 0.61 mm 42 No 1.27 mm NA 5° H20-095WH -66C02(0.095”) (0.024”) (0.050” sq.)

2.41 mm 0.61 mm 100 No NA NA 7° H20-095-24 -1415(0.095” sq.) (0.024”) -62C02*

-66C02

2.41 mm 0.76 mm 196 Yes NA NA 1–5° H20E-095-30 -62C02(0.095” sq.) (0.030”)

2.41 mm × 5.94 mm 0.64 mm 72 No NA NA 1–5° H20-095235 -62C02(0.095” × 0.234”) (0.025”)

2.44 mm × 3.07 mm 0.76 mm 130 No NA NA 1–5° H20-096121 -62C02(0.096” × 0.121”) (0.030”)

2.54 mm 0.28 mm 100 No NA NA 1–5° H20-100-11 -62C02(0.100” sq.) (0.011”)

2.54 mm 0.81 mm 144 No NA NA 1–5° H20-099-32 -62C02(0.100” sq.) (0.032”)

2.54 mm 0.81 mm 100 No NA NA 11° H20-100-32 -1415(0.100” sq.) (0.032”) -62C02*Lead-in chamber (30°) begins 0.015” from bottom pocket surface.

2.54 mm × 3.18 mm 1.27 mm 110 No NA NA 1–5° H20-100125 -62C02(0.100” × 0.125”) (0.050”)

2.54 mm × 3.68 mm 0.51 mm 140 No NA NA 1–5° H20-100145 -62C02(0.100” × 0.145”) (0.020”)

2.54 mm × 3.68 mm 0.71 mm 140 No NA NA 1–5° H20-101146 -62C02(0.100” × 0.145”) (0.028”)

2.54 mm × 3.68 mm 0.81 mm 140 No NA NA 1–5° H20-099144 -62C02(0.100” × 0.145”) (0.032”)


2.54 mm × 5.08 mm 1.78 mm 50 No NA NA 1–5° H20-099199 -1415(0.100” × 0.200”) (0.070”) -62C02*

-66C02



Section1:H

20Series

(2”)Trays

11 ENTEGRIS, INC.



2.54 mm × 5.56 mm 0.89 mm 60 No NA NA 1–5° H20-100220 -62C02(0.100” × 0.219”) (0.035”)

2.67 mm 0.61 mm 144 No NA NA 1–5° H20-105-24 -62C02(0.105” sq.) (0.024”)

2.77 mm × 4.27 mm 0.61 mm 88 No NA NA 1–5° H20-109168 -66C02(0.109” × 0.168”) (0.024”)

2.79 mm 0.41 mm 100 No NA NA 1–5° H20-110-16 -62C02(0.110” sq.) (0.016”)


2.79 mm 0.89 mm 100 No NA NA 1–5° H20-404 -62C02(0.110” sq.) (0.035”)

2.79 mm × 3.68 mm 2.03 mm 80 No NA NA 1–5° H20-110145 -62C02(0.110” × 0.145”) (0.080”)

2.79 mm × 12.19 mm 0.84 mm 36 No NA NA 1–5° H20-110480 -66C02(0.110” × 0.480”) (0.033”)

2.92 mm 0.76 mm 100 No NA NA 1–5° H20-115 -1415(0.115” sq.) (0.030”)

2.92 mm × 7.24 mm 0.46 mm 50 No NA NA 5° H20-114284 -1415(0.115” × 0.285”) (0.018”)Underside stacking clearance is 0.017.”

3.00 mm × 6.22 mm 0.76 mm 50 No NA NA 1–5° H20-118246 -62C02(0.118” × 0.245”) (0.030”)

3.05 mm 0.61 mm 100 No NA NA 1–5° H20-120-24 -66C02(0.120” sq.) (0.024”)

3.05 mm × 4.06 mm 0.51 mm 80 No NA NA 1–5° H20-120160 -66C02(0.120” × 0.160”) (0.020”)

3.05 mm × 4.70 mm 0.51 mm 96 No NA NA 1–5° H20-120185 -1415(0.120” × 0.185”) (0.020”) -62C02*

3.05 mm × 4.70 mm 0.81 mm 96 No NA NA 1–5° H20-121186 -62C02(0.120” × 0.184”) (0.032”)

3.10 mm 0.81 mm 121 No NA NA 30° H20-122 -62C02(0.122” sq.) (0.032”)

3.10 mm × 2.87 mm 0.81 mm 100 No NA NA 30° H20-113122 -62C02(0.122” × 0.113”) (0.032”)Pocket draft begins 0.015˝ from bottom pocket surface.



Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 12



3.12 mm × 5.00 mm 1.14 mm 88 No NA NA 1–5° H20-123198 -62C02(0.123” × 0.197”) (0.045”)

3.18 mm 0.41 mm 121 No NA NA 1–5° H20-124 -66C02(0.125” sq.) (0.016”)

3.18 mm × 5.08 mm 0.41 mm 88 No NA NA 1–5° H20-124199 -1408(0.125” × 0.200”) (0.016”)

3.18 mm × 5.84 mm 0.89 mm 60 No NA NA 1–5° H20-125230 -1415(0.125” × 0.230”) (0.035”) -62C02*

-62C02

3.18 mm × 7.60 mm 1.40 mm 50 No NA NA 1–5° H20-125300 -62C02(0.125” × 0.299”) (0.055”)

3.20 mm 1.19 mm 100 No NA NA 1–5° H20-126-47 -62C02(0.126” sq.) (0.047”)

3.23 mm × 3.51 mm 0.86 mm 100 No NA NA 10° H20-127138 -62C02(0.127” × 0.138”) (0.034”)


3.30 mm 0.41 mm 100 No NA NA 1–5° H20-130-16 -66C02(0.130” sq.) (0.016”)


3.30 mm 0.89 mm 100 No NA NA 1–5° H20-405 -1415(0.130” sq.) (0.035”) -62C02*

3.30 mm × 4.62 mm 0.76 mm 88 No NA NA 1–5° H20-130182 -1415(0.130” × 0.182”) (0.030”) -62C02*

3.30 mm × 4.62 mm 0.76 mm 88 No 1.14 mm×1.27mm NA 5° H20-130182WH -1415(0.130” × 0.182”) (0.030”) (0.045”×0.050”)

3.30 mm × 4.62 mm 1.14 mm 88 No NA NA 1–5° H20-129181 -1415(0.130” × 0.182”) (0.045”)

3.30 mm × 7.60 mm 0.76 mm 50 No NA NA 1–5° H20-130300 -62C02(0.130” × 0.299”) (0.030”)

3.56 mm 0.41 mm 100 No NA NA 1–5° H20-414 -62C02*(0.140” sq.) (0.016”) -66C02

3.56 mm 0.61 mm 100 No NA NA 1–5° H20-140-24 -62C02(0.140” sq.) (0.024”)



Section1:H

20Series

(2”)Trays

13 ENTEGRIS, INC.



3.56 mm 1.52 mm 100 No NA NA 1–5° H20-414-60 -62C02(0.140” sq.) (0.060”)Not available in ChipSentry material (-66C02).

3.56 mm × 4.80 mm 1.78 mm 48 No NA NA 1–5° H20-140190 -62C02(0.140” × 0.189”) (0.070”)

3.58 mm 0.81 mm 81 No NA NA 30° H20-141 -62C02(0.141” sq.) (0.032”)Pocket draft begins 0.015˝ from bottom pocket surface.


3.61 mm × 3.73 mm 0.61 mm 64 No NA NA 30° H20-142147 -62C02(0.142” × 0.147”) (0.024”)

3.79 mm × 21.64 mm 0.61 mm 20 No NA NA 1–5° H20-148848 -1415(0.149” × 0.852”) (0.024”)

3.81 mm 0.41 mm 100 No NA NA 1–5° H20-150-16 -62C02(0.150” sq.) (0.016”)

3.81 mm 0.61 mm 49 No NA 1.27 mm 5° H20-151-24TW -66C02(0.150” sq.) (0.024”) (0.050”)


3.81 mm 0.61 mm 100 No NA 1.27 mm 5° H20-150-24TW -66C02(0.150” sq.) (0.024”) (0.050”)

3.81 mm 0.61 mm 100 No 1.27 mm NA 7° H20-150-24WH -62C02(0.150” sq.) (0.024”) (0.050” sq.)

3.81 mm 0.89 mm 49 No NA NA 1–5° H20-150-035 -62C02(0.150” sq.) (0.035”)

3.81 mm × 5.08 mm 1.91 mm 42 No NA NA 1–5° H20-150200 -66C02(0.150” × 0.200”) (0.075”)Tray-cover stacking only. H20 clips will not work.

3.81 mm × 5.03 mm 1.90 mm 42 No NA NA 5° H20-149199 -62C02(0.150” × 0.198”) (0.075”)Raised characters (0.005˝) in pocket bottom.

3.81 mm × 6.33 mm 0.61 mm 35 No NA NA 1–5° H20-150250 -62C02(0.150” × 0.249”) (0.024”)




Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 14



3.81 mm × 7.21 mm 0.89 mm 45 No NA NA 1–5° H20-150285 -62C02(0.150” × 0.284”) (0.035”)

3.94 mm 0.81 mm 81 No NA NA 30° H20-155 -1415(0.155” sq.) (0.032”) -62C02*Pocket draft begins 0.015˝ from bottom pocket surface.

3.96 mm × 4.45 mm 0.81 mm 56 No NA NA 30° H20-156175 -62C02*(0.156” × 0.175”) (0.032”) -66C02Pocket draft begins 0.015˝ from bottom pocket surface.

4.04 mm × 12.93 mm 0.89 mm 24 No NA NA 30° H20-159509 -1403(0.159” × 0.509”) (0.035”) -62C02*

-66C02

4.06 mm × 5.18 mm 0.64 mm 20 No NA NA 1–5° H20-160205 -62C02(0.160” × 0.204”) (0.025”)

4.06 mm × 8.48 mm 0.64 mm 28 No NA NA 1–5° H20-159334 -62C02(0.160” × 0.334”) (0.025”)

4.19 mm 0.61 mm 49 No NA NA 1–5° H20-165-24 -62C02(0.165” sq.) (0.024”)

4.19 mm 0.61 mm 49 No 1.27 mm NA 7° H20-165-24WH -1415(0.165” sq.) (0.024”) (0.050” sq.)

4.27 mm 0.89 mm 49 No NA NA 30° H20-169 -62C02(0.168” sq.) (0.035”)

4.29 mm × 4.55 mm 0.61 mm 49 No NA NA 1–5° H20-170180 -62C02(0.169” × 0.179”) (0.024”)

4.29 mm × 5.31 mm 0.64 mm 20 No NA NA 1–5° H20-170210 -62C02(0.169” × 0.209”) (0.025”)

4.29 mm × 5.56 mm 0.89 mm 42 No NA NA 30° H20-169219 -62C02(0.169” × 0.219”) (0.035”)

4.32 mm × 6.86 mm 0.89 mm 28 No NA NA 30° H20-169269 -1403(0.170” × 0.270”) (0.035”)

4.32 mm × 9.40 mm 0.89 mm 28 No NA NA 30° H20-169369 -1403(0.170” × 0.370”) (0.035”) -62C02*

4.32 mm × 11.94 mm 0.89 mm 21 No NA NA 30° H20-169469 -1403(0.170” × 0.470”) (0.035”)

4.39 mm × 3.61 mm 0.61 mm 80 No NA NA 1–5° H20-142173 -62C02(0.173” × 0.142”) (0.024”)



Section1:H

20Series

(2”)Trays

15 ENTEGRIS, INC.



4.45 mm 0.81 mm 64 No NA NA 1–5° H20-175 -1415(0.175” sq.) (0.032”) -62C02*

4.45 mm × 8.26 mm 1.40 mm 28 No NA NA 1–5° H20-175325 -1415(0.175” × 0.325”) (0.055”)

4.55 mm × 6.83 mm 0.51 mm 35 No NA NA 1–5° H20-180270 -62C02(0.179” × 0.269”) (0.020”)

4.55 mm × 6.83 mm 0.81 mm 35 No NA NA 1–5° H20-181271 -62C02(0.179” × 0.269”) (0.032”)

4.57 mm 0.41 mm 49 No NA NA 1–5° H20-180-16 -66C02(0.180” sq.) (0.016”)

4.57 mm 0.61 mm 49 No NA NA 1–5° H20-180-24 -1415(0.180” sq.) (0.024”) -62C02*

-66C02

4.57 mm × 8.38 mm 0.89 mm 28 No NA NA 30° H20-179329 -1403(0.180” × 0.330”) (0.035”) -62C02*

-66C02

4.70 mm × 3.81 mm 0.61 mm 80 No NA NA 1–5° H20-185150 -66C02(0.185” × 0.150”) (0.024”)

4.83 mm 0.61 mm 49 No NA NA 1–5° H20-190-24 -62C02(0.190” sq.) (0.024”)

4.80 mm × 5.06 mm 1.91 mm 30 No NA NA 1–5° H20-190200 -62C02(0.189” × 0.199”) (0.075”)Tray-cover stacking only. H20 clips will not work.

4.83 mm × 8.89 mm 0.61 mm 32 No NA NA 1–5° H20-190350 -1415(0.190” × 0.350”) (0.024”) -62C02*

4.85 mm × 5.94 mm 0.64 mm 36 No NA NA 30° H20-191234 -66C02(0.191” × 0.234”) (0.025”)Not available in STAT-PRO 150 material (-62C02).



5.05 mm × 6.71 mm 1.78 mm 30 No NA NA 1–5° H20-200265 -62C02(0.199” × 0.264”) (0.070”)



Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 16



5.08 mm × 13.46 mm 0.76 mm 21 No NA NA 1–5° H20-200530 -1415(0.200” × 0.530”) (0.030”)


5.21 mm × 6.10 mm 0.61 mm 42 No NA NA 1–5° H20-205240 -66C02(0.205” × 0.240”) (0.024”)


5.33 mm 0.41 mm 49 No NA NA 1–5° H20-210-16 -1415(0.210” sq.) (0.016”) -62C02*


5.33 mm 0.76 mm 49 No NA NA 1–5° H20-410 -1415(0.210” sq.) (0.030”) -62C02*


5.54 mm × 6.50 mm 0.51 mm 36 No NA NA 1–5° H20-218256 -66C02(0.218” × 0.256”) (0.020”)

5.54 mm × 9.60 mm 1.27 mm 20 No NA NA 1–5° H20-219379 -62C02(0.218” × 0.378”) (0.050”)

5.56 mm 0.61 mm 36 No NA NA 1–5° H20-220-24 -62C02(0.219” sq.) (0.024”)

5.56 mm × 9.63 mm 0.61 mm 20 No NA NA 1–5° H20-220380 -62C02(0.219” × 0.379”) (0.024”)

5.56 mm × 10.64 mm 0.89 mm 18 No NA NA 30° H20-219419 -62C02(0.219” × 0.419”) (0.035”)

5.56 mm × 11.91 mm 0.64 mm 15 No NA NA 30° H20-219469 -1403L(0.219” × 0.469”) (0.025”)

5.59 mm 0.89 mm 36 No NA NA 30° H20-219 -62C02(0.220” sq.) (0.035”)

5.59 mm × 7.37 mm 0.61 mm 30 No NA NA 1–5° H20-220290 -1415(0.220” × 0.290”) (0.024”)




Section1:H

20Series

(2”)Trays

17 ENTEGRIS, INC.



5.89 mm 0.41 mm 36 No NA NA 1–5° H20-232 -1415(0.232” sq.) (0.016”)

6.07 mm × 6.71 mm 1.78 mm 25 No NA NA 1–5° H20-240265 -62C02(0.239” × 0.264”) (0.070”)

6.10 mm 1.14 mm 36 No 2.54 mm NA 4° H20-240WH -1415(0.240” sq.) (0.045”) (0.100” sq.)

6.12 mm × 5.03 mm 0.64 mm 36 No NA NA 1–5° H20-199242 -62C02(0.241” × 0.198”) (0.025”)

6.20 mm × 4.60 mm 1.07 mm 48 No NA NA 30° H20-181244 -1415(0.244” × 0.181”) (0.042”) -62C02*Pocket draft begins 0.017˝ from bottom pocket surface.

6.30 mm × 13.54 mm 0.89 mm 15 No NA NA 30° H20-248533 -1403L(0.248” × 0.533”) (0.035”)


6.35 mm × 19.05 mm 0.61 mm 10 No NA NA 1–5° H20-250750 -66C02(0.250” × 0.750”) (0.024”)

6.45 mm × 7.26 mm 0.61 mm 25 No NA NA 1–5° H20-256288 -62C02(0.254” × 0.286”) (0.024”)

6.50 mm × 10.67 mm 1.42 mm 15 No NA NA 1–5° H20-256420 -1415(0.256” × 0.420”) (0.056”)


6.60 mm 0.61 mm 36 No NA NA 1–5° H20-260-24 -66C02(0.260” sq.) (0.024”)

6.83 mm 0.89 mm 16 No NA NA 1–5° H20-269 -62C02(0.269” sq.) (0.035”)

6.86 mm 0.89 mm 16 No NA NA 1–5° H20-270-35 -62C02(0.270” sq.) (0.035”)

7.09 mm 0.41 mm 36 No NA NA 1–5° H20-280-16 -62C02(0.279” sq.) (0.016”)

7.09 mm × 9.12 mm 0.61 mm 20 No NA NA 1–5° H20-280360 -62C02(0.279” × 0.359”) (0.024”)

7.11 mm 0.61 mm 36 No NA NA 1–5° H20-280-24 -1415(0.280” sq.) (0.024”) -62C02*

-66C02



Section1:

H20

Serie

s(2”)

Trays

ENTEGRIS, INC. 18



7.11 mm × 9.14 mm 1.27 mm 20 No NA NA 1–5° H20-279359 -1415(0.280” × 0.360”) (0.050”) -62C02*

7.26 mm 0.81 mm 25 No NA NA 1–5° H20-287 -62C02(0.286” sq.) (0.032”)


7.60 mm 0.76 mm 25 No NA NA 1–5° H20-300 -1415(0.299” sq.) (0.030”) -62C02*

-66C02

7.60 mm 0.76 mm 25 No 2.54 mm NA 6° H20-300WH -62C02(0.299” sq.) (0.030”) (0.100” sq.)


7.62 mm × 21.59 mm 0.38 mm 10 No NA NA 1–5° H20-300850 -1415(0.300” × 0.850”) (0.015”)

7.82 mm 0.81 mm 25 No NA NA 1–5° H20-310-32 -62C02(0.308” sq.) (0.032”)

7.85 mm 1.07 mm 25 No NA NA 1–5° H20-310-42 -62C02(0.309” sq.) (0.042”)

7.85 mm × 11.66 mm 1.40 mm 15 No NA NA 1–5° H20-310460 -62C02(0.309” × 0.459”) (0.055”)

8.08 mm 0.89 mm 16 No NA NA 30° H20-320 -62C02(0.318” sq.) (0.035”)

8.38 mm 0.61 mm 16 No NA NA 1–5° H20-330-24 -62C02(0.330” sq.) (0.024”)

8.74 mm 1.40 mm 9 No NA NA 1–5° H20-345445 -62C02(0.344” sq.) (0.055”)


9.14 mm 0.61 mm 16 No NA NA 1–5° H20-360-24 -62C02(0.360” sq.) (0.024”)



Section1:H

20Series

(2”)Trays

19 ENTEGRIS, INC.



9.14 mm 1.40 mm 16 No NA NA 1–5° H20-360 -1415(0.360” sq.) (0.055”) -62C02*

9.14 mm × 17.78 mm 0.89 mm 8 No NA NA 1–5° H20-360700 -62C02(0.360” × 0.700”) (0.035”)

9.37 mm × 4.32 mm 0.89 mm 28 No NA NA 30° H20-369169 -62C02(0.369” × 0.170”) (0.035”)

9.58 mm 1.02 mm 16 No NA NA 1–5° H20-411 -1415(0.377” sq.) (0.040”) -62C02*

-66C02

9.96 mm 0.74 mm 9 No NA NA 1–5° H20-394-29 -62C02(0.392” sq.) (0.029”)


10.77 mm 0.76 mm 9 No NA NA 1–5° H20-426 -62C02(0.424” sq.) (0.030”)

10.80 mm 0.61 mm 9 No NA NA 1–5° H20-426-24 -66C02(0.425” sq.) (0.024”)

10.90 mm 1.40 mm 9 No NA NA 1–5° H20-430 -62C02(0.429” sq.) (0.055”)

11.30 mm × 4.60 mm 0.81 mm 21 No NA NA 1–5° H20-181445 -62C02(0.445” × 0.181”) (0.032”)

11.38 mm 0.64 mm 9 No NA NA 1–5° H20-450-25 -62C02(0.448” sq.) (0.025”)

11.43 mm 1.02 mm 9 No NA NA 1–5° H20-450 -1415(0.450” sq.) 0.040”)

11.43 mm × 4.75 mm 1.78 mm 12 No NA 1.57 mm 2° H20-004 -66C02(0.450” × 0.187”) (0.070”) (0.062”)



12.70 mm × 15.24 mm 0.76 mm 6 No NA NA 1–5° H20-500600 -1415(0.500” × 0.600”) (0.030”) -62C02*

12.70 mm × 15.94 mm 1.14 mm 6 No NA NA 1–5° H20-500635 -66C02(0.500” × 0.635”) (0.045”)



Section1:

H20

Serie

s(2”)

Trays


12.85 mm × 10.57 mm 1.14 mm 12 No NA NA 1–5° H20-506416 -66C02(0.506” × 0.416”) (0.045”)


13.21 mm 0.76 mm 9 No NA NA 1–5° H20-520 -62C02(0.520” sq.) (0.030”)

13.26 mm × 2.79 mm 0.56 mm 33 No NA NA 30° H20-522110 -62C02(0.522” × 0.110”) (0.022”)

13.41 mm 1.14 mm 9 No 2.54 mm NA 4° H20-530-45WH -62C02(0.528” sq.) (0.045”) (0.100” sq.)

13.89 mm × 21.44 mm 0.41 mm 6 No NA NA 1–5° H20-547844 -1415(0.547” × 0.844”) (0.016”)

14.00 mm 0.99 mm 9 No NA NA 1–5° H20-551 -1415(0.551” sq.) (0.039”) -62C02*

-66C02

14.94 mm × 15.37 mm 0.61 mm 4 No NA NA 1–5° H20-583600 -66C02(0.588” × 0.605”) (0.024”)

14.96 mm × 15.90 mm 1.07 mm 4 No NA NA 5° H20-588624 -62C02(0.589” × 0.626”) (0.042”)


15.93 mm 0.89 mm 4 No NA NA 1–5° H20-625 -66C02(0.627” sq.) (0.035”)

18.03 mm × 21.08 mm 0.64 mm 4 No NA NA 30° H20-710830 -1403(0.710” × 0.830”) (0.025”) -62C02*

21.84 mm × 14.30 mm 0.76 mm 6 No NA NA 1–5° H20-860563 -66C02(0.860” × 0.563”) (0.030”)Nonstandard pocket orientation.

21.84 mm × 44.45 mm 0.76 mm 2 No NA NA 1–5° H20-860175 -66C02(0.860” × 1.750”) (0.030”)

21.92 mm × 14.02 mm 0.76 mm 6 No NA NA 1–5° H20-550860 -1415(0.863” × 0.552”) (0.030”)

39.88 mm 1.78 mm 1 No NA NA 1–5° H20-1580 -62C02(1.57” sq.) (0.070”)

41.91 mm 1.27 mm 1 No NA NA 1–5° H20-1650 -62C02(1.650” sq.) (0.050”)


ENTEGRIS, INC. 20



Section1:H

20Series

(2”)Trays

• High clearance cover

Part Number Material

H20-02B-1216 Clear styrene

H20-02B-62C02 STAT-PRO 150

H20-02B-66C02 ChipSentry, STAT-PRO 500

• Cover with bumps on thebottom surface

• For most 400 capacity trays


H20-02A-1216 Clear styrene

H20-02A-62C02 STAT-PRO 150

H20-02A-66C02 ChipSentry, STAT-PRO 500



H20-02-40-66C02 ChipSentry, STAT-PRO 500

21 ENTEGRIS, INC.


CoversOrdering InformationPopular tray covers in various standard materials are shown below.The following ordering policies apply:

• Minimum order quantity 300 pieces; additional quantities inincrements of 100 pieces.

• Delivery from stock or four weeks after receipt of order.

Note: STAT-PRO 150 material covers are recommendedfor use only with STAT-PRO 150 material trays.

• Standard cover


H20-02-1201 Amber styrene

H20-02-1216 Clear styrene

H20-02-1415 Natural ABS

H20-02-5413 Transparent, A/S Bayon™ PMMA

H20-02-62C02 STAT-PRO 150

H20-02-66C02 ChipSentry, STAT-PRO 500

H20-02-74D10 Tan STAT-PRO 400

1.42 mm(0.056”)

H20-02 COVER

H20-02B COVER

H20-02-40 COVER

H20-02-ESD COVER

H20-02A COVER

H20-02-RM COVER

• Cover with rib matrixtypically found on traybottom


H20-02-RM-62C02 STAT-PRO 150

H20-02-RM-66C02 ChipSentry, STAT-PRO 500

Section1:

H20

Serie

s(2”)

Covers

0.102 mm (0.004”)

0.203 mm(0.008”)

1.88 mm(0.074”)

1.02 mm(0.040”)

0.508 mm (0.020”)

0.102 mm(0.004”)

• Standard cover withESD sensitive symbol (logo)


H20-02-ESD-66C02 ChipSentry, STAT-PRO 500

1.42 mm(0.056”)

ENTEGRIS, INC. 22


Ordering Information (continued)



H20-02J-1201 Amber styrene

H20-02J-1216 Clear styrene

H20-02J-62C02 STAT-PRO 150

H20-02J-66C02 ChipSentry, STAT-PRO 500

H20-02-24 COVER

H20-02J COVER

H20-02D COVER

H20-02E COVER



H20-02D-1415 Natural ABS

H20-02D-62C02 STAT-PRO 150

H20-02D-66C02 ChipSentry, STAT-PRO 500



H20-02E-62C02 STAT-PRO 150

H20-02E-66C02 ChipSentry, STAT-PRO 500

Section1:H

20Series

(2”)Covers

0.61 mm(0.024”)

0.432 mm(0.017”)

0.152 mm(0.006”)

0.254 mm(0.010”)



H20-02-24-1415 Natural ABS

23 ENTEGRIS, INC.


Accessories

Antistatic Tray Inserts• Nest between H20 trays and/or covers

• Sold in packages of 1,000 pieces

• Precut to tray size

• Minimum order quantity: 1 package

Static SurfaceDecay Time Resistivity

Part Number Inserts Material (seconds) (ohm/square) Color Thickness

H20-001C* ChipGuard™ 1000 Polyethylene 1.5 to 2.0 1011 to 1012 Transparent 0.089 mm to 0.10 mm(0.0035” to 0.004”)

H20-001D ChipGuard 2000 TYVEK® 1.5 to 2.0 1011 to 1012 White 0.13 mm to 0.18 mm(0.005” to 0.007”)

H20-001-0713* ChipGuard 4000 Polyethylene 1.5 to 2.0 1011 to 1012 Pink 0.08 mm to 0.13 mm(0.003” to 0.005”)

H20-001B Nonantistatic Paper NA NA White 0.05 mm to 0.10 mmrice paper inserts (0.002” to 0.004”)

* Packaged with tan separator sheets between inserts. Please discard separator sheets.


H20-04B-0615 Natural polypropylene

H20-04B-67C02 STAT-PRO 125(Polypropylene with carbon powder)

One Piece Clip• For tray on tray or cover on tray

• Overall size: 55 mm × 50 mm × 11 mm(2.2˝ × 2.0˝ × 0.4˝)

• Minimum order quantity: 50

Section1:

H20

Serie

s(2”)

Accessories

Pair of Clips• Interlocking tabs press on the center of the tray forsecure contact between the tray and cover

• Sold by the pair

• Capacity: H20-04: one tray and one coverH20-041: five trays and one coverH20-043: ten trays and one cover



H20-04-0615 Polypropylene

H20-04-61C02 STAT-PRO 100(Polypropylene with carbon powder)





H20-SB06 Spring Box• Holds five trays and one cover or six trays




H20-SB06-0615 Natural polypropylene

H20-SB06-67C02 STAT-PRO 125

H20-SB11 Spring Box• Holds ten trays and one cover or eleven trays






ENTEGRIS, INC. 24

BARE DIE, CHIP SCALE AND WAFER SCALE PACKAGE HANDLING Section1:H

20Series

(2”)Accessories

25 ENTEGRIS, INC.


H20-SB13 Spring Box• Holds twelve trays and one cover or thirteen trays






Storage Box• Holds 12 trays and one cover, or 13 trays

• Overall size: 56 mm × 38 mm × 53 mm(2.2˝ × 1.5˝ × 2.1˝ )



E28-1216 Clear styrene

Tray Case• Holds one tray and one cover, or two trays

• Overall size: 60 mm × 57 mm × 9.8 mm(2.4˝ × 2.3˝ × .39˝ )




Removable Label• Blank label for customized marking

• Pressure-sensitive adhesive is both removable andnondepositing (leaving no adhesive residue)

• Adheres well to most plastic surfaces

• Packaged and sold in rolls of 1,000

• For use with all H20 chip tray covers

• Overall size: 38 mm (1.5˝ sq.)

• Minimum order quantity: 1 roll

• Preprinted label with custom information available


H20-002LB Polyolefin copolymer

Section1:

H20

Serie

s(2”)

Accessories

ENTEGRIS, INC. 26


Chip Tray/Die Transfer Fixture• Chip tray with die slides into bottom track of thefixture. Empty tray is placed inverted over full tray.Holding the fixture and trays, turn over, lift offfixture. The original tray with die will be emptyand die will now be in new tray.

• Compatible chip trays: All H20 chip trays

• Overall size: 56 mm × 10 mm (2.2˝ sq. × 0.4˝)



H20T-1415 Natural ABS

H20T-66C02 ChipSentry, STAT-PRO 500

Chip Washing Jig/Screen• Screen retains chips in the pockets of invertedchip trays while in an ultrasonic bath.

• Screen hole size: 250 microns

• Screen size: 95.3 mm (3.75˝ diameter)

• Minimum order quantities:Washing jig: 1Replacement screen: 10


H02-20-0315 ETFE(Washing jig)

H02-204-0215 PFA(Replacement screen)

Section1:H

20Series

(2”)Accessories

27 ENTEGRIS, INC.


Cleaning Fixture/Clip• For H20 chip trays in wash applications

• Rinser/dryer compatible

• Wash openings in sides

• Clip holds two H20 trays

• Carrier holds ten clips

• Pocket spacing: 13 mm (0.5˝)

• Pocket flat: 2.5 mm (0.10˝)


• Compatible handles: A018, A027

• Minimum order quantities:Clips: 50Carriers and handles: 1

Part Number Description Material

H20-042-0603 Clip Blue polypropylene

A110-01-0603 Carrier Blue polypropylene

PA018-0603 150 mm (5”) handle Blue polypropylene

PA027-0603 200 mm (8”) handle Blue polypropylene

H20-042-0315 Clip ETFE

A110-01-0315 Carrier ETFE

A018-0215 150 mm (5”) handle PFA

A027-0215 200 mm (8”) handle PFA

Jig Tray• Patented JEDEC thin profile jig tray

• Holds ten H20 trays

• Minimum order quantities:Jig tray: 1Replacement springs: 5

Part Number Description Material

H20-JIG-0205-ALUM JEDEC jig tray Aluminum

01-004611 Replacement springs Spring steel

01-007244 PIN Brass

Section1:

H20

Serie

s(2”)

Accessories

ENTEGRIS, INC. 28


Section 2:CT3 Series (3˝) ProductsTrays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29




www.entegris.com

Section2:CT3

Series(3”)

Products

29 ENTEGRIS, INC.


Entegris offers a selection of CT3 series 3˝ squaretrays. CT3 series trays are available in various pocketsizes and depths.

Ordering Information•Minimum order quantity: 2,000 pieces

• These products are manufactured in Japan,extended lead times apply

• Contact Entegris Customer Service formore information

CT3 Series Trays

Part Number Material Pocket Size Pocket Depth Capacity

CT3-10X18J-66C02 ChipSentry, STAT-PRO 500 1.05 mm × 1.85 mm 1.05 mm 85(0.041” × 0.073”) (0.041”)


CT3-42X42J-74D04 Red STAT-PRO 400 4.20 mm × 4.20 mm 1.50 mm 56(0.165” × 0.165”) (0.059”)

CT3-55X97J-74D15 Natural STAT-PRO 400 5.59 mm × 9.77 mm 0.60 mm 56(0.220” × 0.385”) (0.024”)


Section2:

CT3Se

ries(3”)

Prod

ucts

CT3 Series (3˝) Trays

ENTEGRIS, INC. 30


Section 3:H44 Series (4˝) ProductsH44 Series Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31



Part Number System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Specialized CSP Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40


Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Antistatic Tray Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Jig Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Section3:H

44Series

(4”)Products



www.entegris.com

31 ENTEGRIS, INC.


H44 Series (4˝) ProductsEntegris offers a wide selection of H44 series 4˝square trays, covers and accessories to meet yourchanging needs. H44 series trays are available invarious pocket sizes and depths, with or withoutwash holes and with or without tweezer slots.

TraysEntegris’ H44 series products offer proven reliabilityfor handling bare die, including:

• Known Good Die (KGD)

• Wafer Scale Packaging (WSP)

• Chip Scale Packaging (CSP)

• Flip chip

• Bump die

• Opto electronics

• Passive and active chip components

• Mechanical components




Section3:

H44

Serie

s(4”)

Trays

ENTEGRIS, INC. 32


Cataloged Tray – Standard MaterialEntegris offers many popular trays in variousstandard materials as listed in the “StandardMaterials” column. The following orderingpolicies apply:

• Minimum order quantity 200 pieces, thereafterin quantities of 50 pieces

• Shipment from stock or within four weeksafter receipt of order (See www.devicecare.comfor availability)

Cataloged Tray – Nonstandard MaterialAdditional material options may be available forcataloged trays. Material options not listed in the“Standard Materials” column for each tray arespecials requiring the following ordering policies:




Noncataloged TrayEntegris offers many tray designs other thanthose listed in the catalog. Visit Entegris’ websiteat www.devicecare.com or contact an EntegrisTechnical Service Representative for informationon available noncataloged trays. The followingordering policies apply:




Custom Tray DesignEntegris offers custom trays designed to meetyour exact requirements. Visit Entegris’ websiteat www.devicecare.com or use the “Fax It Formfor Custom Trays” in the back of the catalog.You can also contact an Entegris Customer Servicerepresentative at +1 952-556-4181.

Special ordering policies apply.

Tray Sizes and TolerancesTray sizes and tolerances may vary by material. Provided below are dimensions and tolerances.

Dimensions and Tolerances

Material Description Code Overall Size (sq.) Overall Height Flatness

ABS Acrylonitrile -14XX 101.6 ±0.127 mm 8.001 ±0.127 mm 0.254 mmButadiene styrene (4.000 ±0.005”) (0.315 ±0.005”) (0.010”)with a color additive

STAT-PRO 150 Polypropylene -62C02 101.35 ±0.254 mm 8.001 ±0.127 mm 0.508 mmwith carbon powder (3.990 ±0.010”) (0.315 ±0.005”) (0.020”)and glass bead

STAT-PRO 400 Alloy of ABS -74DXX 101.6 ±0.127 mm 8.001 ±0.127 mm 0.254 mmand an intrinsically (4.000 ±0.005”) (0.315 ±0.005”) (0.010”)dissipative polymer

ChipSentry, Polycarbonate -66C02 101.6 ±0.127 mm 8.001 ±0.127 mm 0.254 mmSTAT-PRO 500 with carbon powder (4.000 ±0.005”) (0.315 ±0.005”) (0.010”)

Tray Ordering InformationH44 trays are sorted by pocket size. Simply look for the pocket size you want,find the options you require and select the material. Provide tray Part Number andmaterial code from the “Standard Materials” column. Please order in increments of 100as trays are packaged in lots of 100 trays after the minimum order quantity is met.

Section3:H

44Series

(4”)Trays

33 ENTEGRIS, INC.

BARE DIE, CHIP SCALE AND WAFER SCALE PACKAGE HANDLINGSe

ction3:

H44

Serie

s(4”)

Trays

Part Number SystemH44 - 158 - XXXXX

SeriesH44 = 101.6 mm × 101.6 mm

(4” × 4”)

H44E = 101.6 mm × 101.6 mm(4” × 4”) roughsurface finish (EDM)on pocket bottom

Design-CXX = Cored out

tray design

Material14XX = ABS

(various colors)

62C02 = STAT-PRO 150black conductivepolypropylene

66C02 = ChipSentrySTAT-PRO 500black conductivepolycarbonate

74DXX= STAT-PRO 400static dissipativecolorable ABS

Color**01 = Amber*

02 = Black

03 = Blue

03L = Light blue

04 = Red

05 = Green

06 = Brown

07 = Yellow

08 = Gray

09 = Orange

10 = Tan

11 = Pink

12 = White*

15 = Natural*

21 = Purple

26 = Maroon* STAT-PRO 400 material not available in amber, white or natural color.** Refer to inside back cover for complete color chart.

ENTEGRIS, INC. 34



3.68 mm × 5.08 mm 0.51 mm 252 Yes NA NA 5° H44E-C145200 -66C02(0.145” × 0.200”) (0.020”)Tray bottom cored out. Tray-cover stacking only.

4.01 mm 0.61 mm 256 No NA NA 5° H44-158 -66C02(0.158” sq.) (0.024”)Lead in chamber (45°) begins 0.014 ” from bottom pocket surface.

4.34 mm 2.16 mm 100 No NA 2.54 mm 5° H44-171-85TW -66C02(0.171” sq.) (0.085”) (0.100”) all sides

4.45 mm × 3.56 mm 1.27 mm 195 No NA NA 5° H44-140175 -1415(0.175” × 0.140”) (0.050”) -66C02

4.83 mm 0.61 mm 196 No NA NA – H44-190 -1409(0.190” sq.) (0.024”) -66C02Lead in chamber (45°) begins 0.014 ” from bottom pocket surface.

4.93 mm × 5.59 mm 0.61 mm 156 No NA NA 5° H44-194220 -1415(0.194” × 0.220”) (0.024”)

4.95 mm 0.61 mm 196 No NA NA 5° H44-195 -66C02(0.195” sq.) (0.024”)

5.00 mm 1.02 mm 169 No NA NA 5° H44-195-40 -1415(0.197” sq.) (0.040”)

5.33 mm 0.61 mm 144 No NA NA 5° H44-210 -1415(0.210” sq.) (0.24”)

5.38 mm × 6.73 mm 1.02 mm 120 No NA NA 1–5° H44-212265 -66C02(0.212” × 0.265”) (0.040”)

5.46 mm 2.16 mm 64 No NA 2.54 mm 5° H44-215-85TW -66C02(0.215” sq.) (0.085”) (0.100”) all sides

5.59 mm 3.30 mm 100 No NA NA 5° H44-220 -1415(0.220” sq.) (0.130”) -62C02*


5.59 mm × 4.45 mm 1.52 mm 180 No NA NA 7° H44-175220 -1415(0.220” × 0.175”) (0.060”) -62C02*

5.66 mm × 3.30 mm 0.61 mm 216 No NA NA 5° H44-130223 -66C02(0.223” × 0.130”) (0.024”)

5.84 mm 0.61 mm 121 No NA NA 5° H44-230 -66C02(0.230” sq.) (0.024”)

6.10 mm × 7.37 mm 3.81 mm 110 No NA NA 1–5° H44E-240290 -66C02(0.240” × 0.290”) (0.150”)



Section3:H

44Series

(4”)Trays

35 ENTEGRIS, INC.



6.25 mm 0.61 mm 121 No NA NA 5° H44-245 -66C02(0.246” sq.) (0.024”)

6.30 mm 2.03 mm 121 No NA NA 5° H44-248-80 -66C02(0.248” sq.) (0.080”)

6.35 mm 0.76 mm 100 No NA NA 5° H44-250-30 -66C02(0.250” sq.) (0.030”)

6.35 mm 3.30 mm 100 No NA NA 5° H44-250 -1415(0.250” sq.) (0.130”) -62C02*

6.35 mm 3.30 mm 100 No 4.06 mm NA 5° H44-250H2 -1415(0.250” sq.) (0.130”) (0.160” sq.)

6.35 mm × 3.94 mm 2.16 mm 150 No NA NA 5° H44-155250 -1415(0.250” × 0.155”) (0.085”) -66C02

6.48 mm 0.61 mm 121 No NA NA 5° H44-255 -66C02(0.255” sq.) (0.024”)Lead in chamber (45°) begins 0.014” from bottom pocket surface.

6.60 mm 2.54 mm 100 No NA NA 5° H44-260 -1415(0.260” sq.) (0.100”) -62C02*

-66C02

6.65 mm 1.65 mm 121 No NA NA 5° H44-260-63 -66C02(0.262” sq.) (0.065”)

6.81 mm 0.61 mm 100 No NA NA 5° H44-270 -62C02(0.268” sq.) (0.024”)

6.99 mm × 8.38 mm 1.02 mm 90 No NA NA 1–5° H44-275330 -66C02(0.275” × 0.330”) (0.040”)

7.11 mm 0.69 mm 100 No NA NA 45° H44-281 -1407(0.280” sq.) (0.027”)Recessed surface for insert.


7.62 mm 0.76 mm 50 No NA NA 0° H44-300 -1415(0.300” sq.) (0.030”)

7.62 mm 1.27 mm 81 No NA NA 5° H44-299 -1407(0.300” sq.) (0.050”) -62C02*

-66C02

7.62 mm 3.94 mm 64 No NA NA 5° H44-300-155 -1415(0.300” sq.) (0.155”) -62C02*

7.62 mm × 6.99 mm 1.02 mm 100 No NA NA 1–5° H44-300275 -66C02(0.300” × 0.275”) (0.040”)



Section3:

H44

Serie

s(4”)

Trays

ENTEGRIS, INC. 36



7.62 mm × 6.35 mm 2.29 mm 90 No NA NA 5° H44-250300 -1415(0.300” × 0.250”) (0.090”) -66C02

7.98 mm × 4.24 mm 3.18 mm 135 No NA NA 5° H44-167315 -1415(0.314” × 0.167”) (0.125”)

8.00 mm 2.54 mm 81 Yes NA NA 5° H44E-315-100 -66C02(0.315” sq.) (0.100”)

8.38 mm × 2.41 mm 0.76 mm 234 No NA NA 0° H44-095329 -1415(0.330” × 0.095”) (0.030”)Recessed surface for insert.

8.51 mm × 19.05 mm 0.51 mm 36 No NA NA 5° H44-335750 -66C02(0.335” × 0.750”) (0.020”)

8.89 mm × 21.59 mm 1.27 mm 24 No NA NA 5° H44-350850 -62C02(0.350” × 0850”) (0.050”)

9.14 mm 2.54 mm 64 No NA NA 5° H44-359 -1415(0.360” sq.) (0.100”) -62C02*

-66C02

9.14 mm 0.71 mm 64 No NA NA 5° H44-360-28 -1415(0.360” sq.) (0.028”)

9.14 mm 0.43 mm 64 No NA NA 5° H44-360 -1415(0.360” sq.) (0.017”)

10.16 mm 0.76 mm 49 No NA NA 5° H44-400-30 -66C02(0.400” sq.) (0.030”)

10.16 mm 1.19 mm 49 No NA NA 5° H44-400-47 -62C02(0.400” sq.) (0.047”)

10.16 mm 2.54 mm 49 No NA NA 5° H44-400 -1415(0.400” sq.) (0.100”) -62C02*

-66C02

10.21 mm × 12.75 mm 3.94 mm 42 No NA NA 5° H44-400500 -1415(0.402” × 0.502”) (0.155”) -62C02*

10.62 mm × 5.54 mm 0.61 mm 60 No NA NA 45° H44-220420 -62C02(0.418” × 0.218”) (0.024”)Recessed surface for insert.

10.66 mm 2.03 mm 49 No NA NA 5° H44-420-80 -62C02(0.420” sq.) (0.080”)

10.95 mm × 14.76 mm 0.38 mm 35 Yes NA NA 5° H44E-C431581 -66C02(0.431” × 0.581”) (0.015”)Tray bottom cored out. Tray-cover stacking only.



Section3:H

44Series

(4”)Trays

37 ENTEGRIS, INC.



11.51 mm 2.54 mm 36 No NA NA 5° H44-453 -62C02(0.453” sq.) (0.100”)

11.66 mm 2.54 mm 36 No NA NA 5° H44-460 -1415(0.459” sq.) (0.100”)

11.94 mm × 8.13 mm 4.19 mm 48 No NA NA 5° H44-320470N -1415(0.470” × 0.320”) (0.165”) -62C02*Raised characters in pocket bottom.

12.45 mm × 7.11 mm 0.89 mm 60 No NA NA 5° H44-280490 -1415(0.490” × .280”) (0.035”) -62C02*

12.68 mm 1.02 mm 36 No NA NA 0° H44-500 -62C02(0.499” dia.) (0.040”)

12.70 mm 2.54 mm 36 No NA NA 5° H44-499 -1415(0.500” sq.) (0.100”) -62C02*

-66C02

13.21 mm 1.02 mm 36 No NA NA 1–5° H44-520 -66C02(0.520” sq.) (0.040”)

13.31 mm 0.76 mm 25 No NA NA 5° H44-524 -62C02(0.524” sq.) (0.030”) -66C02*

13.51 mm × 18.52 mm 2.54 mm 20 No NA NA 5° H44-532729 -62C02(0.532” × 0.729”) (0.100”)

13.92 mm 0.38 mm 25 Yes NA NA 5° H44E-545-15 -66C02(0.548” sq.) (0.015”)

13.95 mm × 11.41 mm 0.51 mm 30 No NA NA 5° H44-450550 -62C02(0.549” × 0.449”) (0.020”)

14.86 mm × 18.75 mm 0.51 mm 20 No NA NA 5° H44-585738 -66C02(0.585” × 0.738”) (0.020”)

15.24 mm 2.54 mm 25 No NA NA 5° H44-600 -1415(0.600” sq.) (0.100”) -62C02*

-66C02

15.88 mm × 6.35 mm 4.19 mm 40 No NA NA 5° H44-250625 -1415(0.625” × 0.250”) (0.165”) -62C02*

16.03 mm × 6.40 mm 4.24 mm 40 No NA NA 5° H44-250625N -1415(0.631” × 0.252”) (0.167”) -62C02*Raised characters (0.005”) on pocket bottom.

16.59 mm 0.76 mm 16 No NA NA 5° H44-650 -1415(0.653” sq.) (0.030”) -62C02*

-66C02



Section3:

H44

Serie

s(4”)

Trays

ENTEGRIS, INC. 38



16.51 mm 1.14 mm 16 No NA NA 1–5° H44-650-45 -66C02(0.650” sq.) (0.045”)

17.98 mm × 8.28 mm 1.78 mm 16 No NA 132 mm (0.520”) 5° H44-326708TW -66C02(0.708” × 0.326”) (0.070”) top/bottom

18.29 mm 0.76 mm 16 Yes NA NA 5° H44E-C720-30 -66C02(0.720” sq.) (0.030”)Tray bottom cored out. Tray-cover stacking only.

18.80 mm 2.54 mm 16 No NA NA 5° H44-740 -1415(0.740” sq.) (0.100”) -62C02*

19.05 mm 1.52 mm 16 No NA NA 5° H44-750 -1415(0.750” sq.) (0.060”) -62C02*

19.05 mm × 30.48 mm 4.57 mm 6 No NA NA 5° H44-1200 -62C02(0.750” × 1.200”) (0.180”)

21.84 mm × 16.89 mm 0.51 mm 12 No NA NA 5° H44-665860 -66C02(0.860” × 0.665”) (0.020”)

21.84 mm × 16.89 mm 0.51 mm 12 Yes NA NA 5° H44E-665860 -66C02(0.860” × 0.665”) (0.020”)

22.86 mm × 18.16 mm 3.30 mm 12 No NA NA 5° H44-715900 -1415(0.900” × 0.715”) (0.130”) -62C02*

-66C02

25.40 mm 3.30 mm 9 No NA NA 7° H44-999 -1415(1.000” sq.) (0.130”) -62C02*

-66C02

25.40 mm × 12.70 mm 3.94 mm 15 No NA NA 5° H44-500100 -1415(1.000” × 0.500”) (0.155”) -62C02*

26.67 mm 3.81 mm 9 No NA NA 5° H44-1050 -1415(1.050” sq.) (0.150”) -62C02*

-66C02

27.08 mm 1.02 mm 9 No NA NA 5° H44-106 -1403L(1.066” sq.) (0.040”) -62C02*

-66C02

38.10 mm × 25.40 mm 3.30 mm 6 No NA NA 5° H44-100150 -1415(1.500” × 1.000”) (0.130”) -62C02*

39.37 mm 2.79 mm 4 No NA NA 5° H44-1550 -1415(1.550” sq.) (0.110”)

68.28 mm × 26.97 mm 1.02 mm 3 No NA NA 5° H44-106269 -1415(2.688” × 1.062”) (0.040”) -62C02*



Section3:H

44Series

(4”)Trays

39 ENTEGRIS, INC.


Specialized CSP Products

H44-TV46 Series Trays• “Live bug” device orientation

• Pocket size: 6.35 mm × 8.13 mm (0.250˝ × 0.320˝ )

• Pocket depth: 2.03 mm (0.080˝)

• Capacity: 80

Part Number Material Pocket Style Flippable Compatible Covers

H44-TV46-01-66C02 ChipSentry, Standard bump contact No H44-TV46-03-66C02STAT-PRO 500 H44-TV46-04-66C02

H44-TV46-02-66C02 ChipSentry Perimeter support shelf No H44-TV46-03-66C02STAT-PRO 500 prevents bump contact H44-TV46-04-66C02

H44-TV46-05-66C02 ChipSentry Perimeter support shelf Stacked trays can be Tray on tray stacking onlySTAT-PRO 500 prevents bump contact flipped to a “dead bug”

position for bumpapplication or inspection

H44-TV46 Series Covers• Compatible trays: H44-TV46-01-66C02 andH44-TV46-02-66C02

Part Number Material Special Features

H44-TV46-03-66C02 ChipSentry Incorporates hold down features to minimize vertical (z direction)STAT-PRO 500 device movement

H44-TV46-04-66C02 ChipSentry Tray and cover can be flipped to a “dead bug” position for bump applicationSTAT-PRO 500 or inspection

H44-328506 Tray• “Live bug” device orientation

• Pocket size: 8.33 mm × 12.85 mm (0.328˝ × 0.506˝ )

• Pocket depth: 1.88 mm (0.074˝)

• Capacity: 48

Part Number Material Pocket Style Flippable Compatible Covers

H44-328506-66C02 ChipSentry Standard bump contact No Standard H44 coversSTAT-PRO 500

Specialized CSP Products

Section3:

H44

Serie

s(4”)

Specialized

CSPProd

ucts

• Standard cover


H44-02-1201 Amber styrene


H44-02-1415 Natural ABS

H44-02-5413 Transparent, A/S Bayon PMMA

H44-02-62C02 STAT-PRO 150

H44-02-66C02 ChipSentry, STAT-PRO 500

H44-02-74D10 Tan STAT-PRO 400



H44-02C-1415 Natural ABS

H44-02C-62C02 STAT-PRO 150

H44-02C-66C02 ChipSentry, STAT-PRO 500



H44-02B-1216 Clear styrene

H44-02B-62C02 STAT-PRO 150

H44-02B-66C02 ChipSentry, STAT-PRO 500

• Cover with ribmatrix typicallyfound on tray bottom


H44-02-RM-66C02 ChipSentry, STAT-PRO 500

CoversOrdering InformationPopular tray covers in various standard materials are shown in this catalog.

The following ordering policies apply:

• Minimum order quantity 200 pieces; thereafter in quantities of 50 pieces.

• Delivery from stock or four weeks after receipt of order.

Note: STAT-PRO 150 material covers are recommended for use only with STAT-PRO 150 material trays.

ENTEGRIS, INC. 40


H44-02 COVER H44-02C COVER

H44-02-15 COVER

H44-02A COVER

H44-02-RM COVER

H44-02B COVER



H44-02-15-74D10 Tan STAT-PRO 400



H44-02A-1415 Natural ABS

H44-02A-62C02 STAT-PRO 150

H44-02A-66C02 ChipSentry, STAT-PRO 500

H44-02A-5413 Bayon™ PMMA Transparent, A/S

H44-02LR COVER

• Tray outline cover


H44-02LR-66C02 ChipSentry, STAT-PRO 500Use with H44-041LR clip and H44-041 clip

Section3:H

44Series

(4”)Covers

2.03 mm(0.080”)

2.54 mm(0.10”)

4.064 mm(0.160”)

0.254 mm(0.010”)

0.38 mm(0.015”)

1.78 mm(0.070”)

Pair of Clips – Two Trays• Interlocking tabs press on the center of the trayfor secure contact between trays or tray andH44-02LR cover


• Capacity: two trays only


41 ENTEGRIS, INC.


Accessories

Antistatic Tray Inserts• Nest between H44 trays and/or covers

• Sold in packages of 500 pieces

• Precut to tray size

• Minimum order quantity: 1 package

Static SurfaceDecay Time Resistivity

Part Number Inserts Material (seconds) (ohm/square) Color Thickness

H44-001D ChipGuard 2000 TYVEK 1.5 to 2.0 1011 to 1012 White 0.13 mm to 0.18 mm(0.005” to 0.007”)

H44-001-0713* ChipGuard 4000 Polyethylene 1.5 to 2.0 1011 to 1012 Pink 0.08 mm to 0.13 mm(0.003” to 0.005”)

H44-001B Nonantistatic Paper NA NA White 0.05 mm to 0.10 mmrice paper inserts (0.002” to 0.004”)

* Packaged with tan separator sheets between inserts. Please discard separator sheets.


H44-04-0615 Natural polypropylene

H44-04-61C02 STAT-PRO 100


H44-041-0615 Natural polypropylene

H44-041-61C02 STAT-PRO 100

Pair of Clips – Tray and Cover• Interlocking tabs press on the center of the trayfor secure contact between tray and cover


• Capacity: one tray and one cover only


Section3:

H44

Serie

s(4”)

Accessories

ENTEGRIS, INC. 42


Pair of Clips – Six Trays, One Cover• Interlocking tabs press on the center of the trayfor secure contact between the trays


• Capacity: six trays and one cover only



H44-04B-0615 Natural polypropylene

H44-04B-61C02 STAT-PRO 100

Wash Tray Clip• Holds two trays

• A189-50-18 carrier holds five H44-042 clips



H44-042-0315 ETFE

H44-042-0603 Blue polypropylene

Carrier• Holds five H44-042 clips

• Compatible handle: A058-050-0515

• Compatible box: E94-50-101-1403

• A189-50-18-0715 not recommended for use withshallow pocket chip trays



A189-50-18-0715 High density polyethylene

A189-50-18-0515 PVDF

Storage/Transport Clip• Holds two trays or H44-02LR cover and one tray

• Clip is not recommended for use with trays made ofSTAT-PRO 150 material



H44-041LR-61C02 STAT-PRO 100

Section3:H

44Series

(4”)Accessories

43 ENTEGRIS, INC.



P44-JIG-101-4 Carbon fiber-filled PES

Jig Tray• Patented JEDEC thick profile jig tray

• Holds three H44 or P44 trays

• Maximum temperature: 180°C

• Order in multiples of five trays


Section3:

H44

Serie

s(4”)

Accessories

ENTEGRIS, INC. 44


Section 4:Additional ProductsFilm Frame Shippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Horizontal Wafer Shippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Other Related Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Section4:AdditionalProducts



www.entegris.com

45 ENTEGRIS, INC.


Additional ProductsEntegris offers a variety of additional products fortest, assembly and packaging applications.

Film Frame ShippersE400 film frame shippers provide a safe and effectivemethod to ship and store wafers attached to filmframes. The shippers are a great way to ship dicedand thinned wafers (Si, GaAs, GaN, SiC, etc.) tocontract assembly houses on the other side ofthe world. Shippers are available for 150 mm to300 mm wafers.

Horizontal Wafer ShippersEntegris horizontal wafer shippers offer secureprotection for processing, storage and shipping of150 mm to 300 mm finished wafers. The shippersprotect full thickness or thinned wafers from bothphysical and electrostatic discharge damage. Offeredwith secondary packaging and recycling services.

Other Related ProductsEntegris continues to offer select specialty productsincluding labware, tweezers, wafer baskets and smallcustom carriers and handles. Entegris also offerssingle and multiple wafer shippers.

For more information on any of these products or anyother Entegris products contact your local Entegrissales representative or visit www.entegris.com.

Section4:

H44

Serie

s(4”)

Trays

Section4:

Additio

nalP

rodu

cts

ENTEGRIS, INC. 46


Section 5:Technical InformationOnline Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Entegris Regional Customer Service Centers . . . . . . . . . . . . . . . . . . . . . . 47

DeviceCare Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Technical Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Material Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Materials for Tray Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Materials for Accessory Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Chemical/Material Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . 49

Fax It Form for Custom Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Index by Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Material Color Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Section5:TechnicalInform

ation



www.entegris.com

47 ENTEGRIS, INC.


Online AssistanceVisit www.devicecare.com to find our onlineselection tool and more:

Tray Wizard. Search from our database of over5,000 different and exciting H20 series (2˝ square)and H44 series (4˝ square) trays to fit yourspecific application.

Accessories. Select from a variety of complementaryaccessory items such as covers, clips, inserts andstorage boxes that make shipping your die easy andconvenient.

Tray Material Technical Data. View technical datafor materials used in our bare die/CSP trays.

i-Tray™ Designer. Interactive, online design tool foryour custom tray application. A product drawing andquotation are generated online and can be purchasedonline or e-mailed to your purchasing group forordering.

Custom Tray Form. Electronic form for requestingyour custom tray needs. Request is submitted tofactory for quote.

For More InformationPlease call your Regional Customer ServiceCenter today to learn what Entegris can dofor you. Visit www.entegris.com and select the“Customer Service” link for the center nearest you.

DeviceCare ServicesEntegris is with you every step of the way, providingcustomized service offerings designed to minimizeyour risk, maximize your productivity and reduceyour cost. Individualized programs address yourrequirements for certified reuse and recycling,logistics management, product cleaning and otherrelated issues. Services are provided via Entegrisregional service centers or on-site in your facility.

To initiate a service program, contact your RegionalCustomer Service Center.

Technical ServiceEntegris offers a complete package of products,services and support for the test, assembly andpackaging industry. Whether you need assistancein selecting products, require detailed materialinformation, want assistance with product recyclingor have application specific questions, you can counton Entegris to be your resource.

Entegris has technical service personnel ready toassist you with your questions and concerns aboutEntegris products and your specific applications.Our Product Test Lab and Materials Test Lab,made up of experienced technicians, chemists andengineers, has the equipment and analytical tools toanswer your questions related to Entegris products.And, our technical service representatives areavailable to answer any questions you may haveregarding our products in your process.

Technical information to answer some of yourcommon questions is provided on the followingpages. For assistance with your specific product andapplications issues, contact your Regional CustomerService Center by visiting www.entegris.com.

Section5:

Tech

nicalInformation

ENTEGRIS, INC. 48


Surface Static ForStatic Resistivity Decay Dimensional Chemical Temp Applications

Material Code Description Color Protective (ohms/sq.) Time (sec.) Stability Resistance Limit Requiring

ChipSentry, -66C02 Polycarbonate with Black Yes 103 - 106 <0.01 Excellent Poor 70°C Static protectionSTAT-PRO 500 carbon powder and dimensional

stability

STAT-PRO 400 -74DXX Alloy of ABS and Various Yes 109 - 1011 <0.5 Good Poor 70°C Static protectionan intrinsically dimensionaldissipative stability andpolymer a colorable

background

ABS -14XX Acrylonitrile Various No – – Good Poor 70°C Dimensionalbutadiene styrene stability, not staticwith a color additive protection

STAT-PRO 150 -62C02 Polypropylene with Black Yes 102 - 105 <0.01 Fair Good 70°C Static protectioncarbon powder not highand glass bead dimensional

stability

Surface StaticStatic Resistivity Decay Dimensional Chemical Temp

Material Code Description Color Protective (ohms/sq.) Time (sec.) Stability Resistance Limit

STAT-PRO 100 -61C02 Polypropylene Black Yes 103 - 106 <0.01 — — 70°Cwith carbon powder

STAT-PRO 125 -67C02 Polypropylene Black Yes 109 - 1014 <0.01 — — 70°Cwith carbon powder

Bayon™ -5413 Antistatic Transparent Yes 1013 0.01 — — 70°Cpolymethylmethalate

Polypropylene -0615 Natural Transparent No — — — — 70°Cpolypropylene

UV polypropylene -0609 UV blocking Semi- No — — — — 70°Cpolypropylene transparent

Polystyrene -1216 Polystyrene Clear No — — — — 70°C

ETFE -0315 Ethylene Natural No — — Fair Very 100°Ctetrafluoroethylene good

MATERIAL INFORMATION

MATERIALS FOR ACCESSORY PRODUCTS

Section5:M

aterialInformation

49 ENTEGRIS, INC.


CHEMICALS MATERIALSPolypropylene STAT-PRO 100, ABS

ChipSentry, STAT-PRO 125 STAT-PRO 150 STAT-PRO 400 Polystyrene ETFESTAT-PRO 500 20°C 65°C 20°C 20°C 20°C

ACIDSAqua Regia — NO NO — NO OKchromic (50%) NO OK NO — NO OKfuming nitric — NO NO NO — NOglacial acetic — OK NO NO NO NOhydrochloric (conc) OK NO NO NO NO OKhydrofluoric (40%) — OK NO NO NO OKnitric (50%) NO OK NO NO — OKphosphoric OK OK OK NO NO OKsulfuric (conc) OK NO NO NO NO OKtrichloroacetic — OK OK — — OK

BASESammonium hydroxide NO OK OK OK NO OKhydrogen peroxide OK OK NO OK NO OKpotassium hydroxide NO OK OK OK NO OKsodium hydroxide NO OK OK — OK OK

SOLVENTSacetone NO OK — NO NO —aniline NO OK NO NO NO NObenzaldehyde NO NO NO — NO OKbenzyl alcohol NO OK OK NO NO OKcarbon tetrachloride NO NO NO NO NO NOcyclohexanone — NO NO NO NO OKdimethylphthalate — — — — NO —ethyl alcohol NO OK OK NO NO —ethylenediamine — — — — NO —Freon® TE OK OK — NO — OKFreon TF, 113 OK OK — OK — OKFreon TMC NO OK — NO — OKFreon TMS OK OK — NO — OKisooctane — NO NO — OK —isopropanol OK OK OK OK — —methyl alcohol NO OK OK NO NO —methyl ethyl ketone NO OK OK NO NO NOmethylene chloride — NO NO — NO OKNMP NO OK — NO — OKperchloroethylene — NO NO NO NO OKtetrahydrofuran — NO NO — NO NOtoluene NO OK NO NO NO —trichloroethylene NO OK NO NO NO —

OK: Material and chemical are compatibleNO: Chemical has at least some effect on material— No data availableNote: All data is taken from information supplied by material manufacturers. Entegris, Inc. is not

responsible for the accuracy of this data and disclaims any obligation or liability in connectionwith its use in buyer’s applications. Contact Entegris if questions concerning applications arise.

CHEMICAL/MATERIAL REFERENCE CHART (SEE NOTE BELOW)

Section5:

MaterialInformation

ENTEGRIS, INC. 50


From

Name ____________________________________________________________________________________________

Company __________________________________________________________________________________________

Street ____________________________________________________________________________________________

City ______________________________________________________ State ________________________________

Country ____________________________________________________ ZIP Code ____________________________

Phone ____________________________________________________________________________________________

Fax ______________________________________________________________________________________________

This form can be photocopied and used to request information on a custom designed trayto meet your exact requirements. Engineering charges and minimum order quantities apply.Please visit www.entegris.com and select the ”Customer Service” link for the center nearest you.

Notes____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

Wash Holes� Yes � NoX1 ____________

Y1 ____________

Pocket Array(subject to moldability)

___ × ___ Pocketsor

_____ Best Fit

Bump/ball contact OK?� Yes � No

Tray Series Component Size Pocket Size Material___ H20 (2” × 2”)

___ H44 (4” × 4”)

X ______________

Y ______________

Thickness______________

X ____________

Y ____________

Depth __________

____ Tray/coverstacking only

____ Tray/traystacking only

____ ABS, Color ________________________

____ STAT-PRO 150 black conductive polypropylene

____ ChipSentry, STAT-PRO 500 black conductivepolycarbonate

____ STAT-PRO 400 colorable staticdissipative color ____________________

____ Natural ETFE

EDM Finish� Yes � Nodrawing

Tray Quantity ________________________Minimum Order:H20 series – 2,000H44 series – 1,000

Application___ Bare die

___ CSP, bumped die(please senddevice drawing)

Tray flippabilityrequired?� Yes � No

TO: TECHNICAL SERVICE REPRESENTATIVES

Fax It Form for Custom Trays

Section5:Fax

itForm

Y

XDepth

Z

DraftX × Y

X1 × Y1

Y1

X1

51 ENTEGRIS, INC.


Index by Part Number01-004611 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

01-007244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

A018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

A027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

A110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

A189 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

CT3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

E28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

H02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

H20 trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21

H20 covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23

H20-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

H20-002LB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

H20-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

H20-04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

H20-041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

H20-042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

H20-043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

H20-04B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

H20-JIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

H20-SB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-26

H20T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

H44 trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-40

H44 covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

H44-001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

H44-04 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

H44-041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43

H44-042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

H44-04B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

H44-TV46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

PA018 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

PA027 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

P44-JIG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Section5:

Inde

xby

Part

Num

ber

ENTEGRIS, INC. 52


Entegris Standard WarrantiesGENERAL LIMITED WARRANTY FOR NON-CUSTOM ENTEGRIS PRODUCTSSubject to the limitations and disclaimers set forth below, Entegris, Inc. (“Entegris”) warrants that for the Applicable Warranty Period (as defined in the section entitled“Applicable Warranty Period” below) following the date of shipment, the products manufactured by it shall be free of defects in materials and workmanship wheninstalled, used, serviced and operated in accordance with the applicable product documentation. The Applicable Warranty Period does not apply to any lifetimeperformance. In the event that a product failure is caused by a defect in materials or workmanship within the Applicable Warranty Period, Entegris agrees to repair orreplace, at its option and at no charge to the purchaser, any product or part thereof that proves to have such a defect, provided that prompt written notice of any suchdefect is given to Entegris. Entegris’ agreement to repair or replace any product found to be defective in materials or workmanship is the exclusive remedy providedherein; this remedy shall not be deemed to have failed of its essential purpose so long as Entegris is willing and able to repair or replace any such defective Entegrisproduct or part or to refund the purchase price paid.

LimitationsThe warranty set forth above is LIMITED and does not cover: (A) products with the identification label or serial number altered or removed; (B) products which have beenrepaired, or tampered with or serviced by any person other than an authorized Entegris service representative; (C) products which have been subjected to misuse, neglector abuse (including, without limitation, exposure to overpressure, use with excessive voltage or inappropriate power source or exposure to hostile operating conditionsunless the product has been expressly specified by Entegris for use therein). In the case of Entegris products which are systems that include components manufactured bycompanies other than Entegris or its affiliates, the foregoing warranty shall apply only to those components and subassemblies manufactured by Entegris or its affiliates;the non-Entegris components and subassemblies included in such systems are covered by the warranty, if any, extended by the manufacturer thereof. Entegris herebyassigns any such warranty to the system purchaser.

DisclaimersENTEGRIS MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED. THERE IS NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULARPURPOSE. THE APPLICABLE WARRANTY PERIOD IS NOT A LIFETIME PERFORMANCE WARRANTY. The warranty provided herein and the data, specifications anddescriptions of Entegris products appearing in Entegris’ published catalogs and product literature may not be altered except by express written agreement signed by anofficer of Entegris. Representations, oral or written, which are inconsistent with this general limited warranty or any such publications are not authorized and if given,should not be relied upon. Notwithstanding the failure of any remedy provided herein, in no event shall Entegris be liable for consequential, incidental, special orany other indirect damages resulting from economic loss or property damage sustained by any customer from the use of Entegris products.

In the event of a breach of the foregoing warranty, Entegris’ sole obligation shall be to repair or replace, at its option, any product or part thereof that proves defective inmaterials or workmanship within the warranty period, provided the customer notifies Entegris promptly of any such defect. The exclusive remedy provided herein shallnot be deemed to have failed of its essential purpose so Entegris product or part or to refund the purchase price paid.

Applicable Warranty PeriodAs used in this General Limited Warranty the term Applicable Warranty Period for the indicated product groups are as follows:

Entegris Products Warranty PeriodEntegrisProduct Codes

Non-dispense electro-mechanical products

1 year from date of shipment —

Integrated shipping systemsproducts

30 days from dateof shipment

—

Wafer handling, electronicpackaging products andcleaning systems


—

Liquid fittings, containersand housings

1 year from date of shipment —

Exceptions: Sheetlinedchemical container productsand FluoroPure® PFA Liners(blistering, cracking orleakage only)

18 months from dateof shipment

—

Exceptions: FluoroPure®o-rings and gasket materials


—

Software Products 1 year from date of shipment —

Other Products 1 year from date of shipment —

Entegris Products Warranty PeriodEntegrisProduct Codes

Polymeric membrane products 1 year from date of shipment H4, H5, M4, M6Exceptions: Does not applyto membrane-based purifiersMetal membrane products 2 years from date of shipment 12Exceptions: Nickelmembrane gas filtrationproducts

5 years or 100,000 cycles(whichever comes first) fromdate of shipment

12

Exceptions: Nickelmembrane gas diffuserproducts

5 years or 100,000 cycles(whichever comes first) fromdate of shipment

15

Polymeric membrane-basedpurifiers / Other liquid purifiers/Gas purifiers / Chemical filters

1 year from date of shipment I7, I8, F1,F2, F4

Dispense products and liquidsubsystems

1 year from date of shipment H6

Exceptions: Products andsubsystems purchased byOriginal EquipmentManufacturers (OEM)

18 months from dateof shipment

H6

CUSTOM ORDER LIMITED WARRANTY FOR ENTEGRIS PRODUCTSEntegris, Inc. warrants Custom Order products against defects in materials and workmanship for a period of thirty (30) days following receipt by the purchaser. Entegris’sole obligation shall be to repair or replace, at its option, any Custom Order product that proves to be defective in materials or workmanship within the warranty period.

DisclaimersENTEGRIS MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED. THERE IS NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULARPURPOSE. THE APPLICABLE WARRANTY PERIOD IS NOT A LIFETIME PERFORMANCE WARRANTY. The warranty provided herein and the data, specifications anddescriptions of Entegris products appearing in Entegris’ published catalogs and product literature may not be altered except by express written agreement signed by anofficer of Entegris. Representations, oral or written, which are inconsistent with this general limited warranty or any such publications are not authorized and if given,should not be relied upon. Notwithstanding the failure of any remedy provided herein, in no event shall Entegris be liable for consequential, incidental, special orany other indirect damages resulting from economic loss or property damage sustained by any customer from the use of Entegris products.

In the event of a breach of the foregoing warranty, Entegris’ sole obligation shall be to repair or replace, at its option, any product or part thereof that proves defectivein materials or workmanship within the warranty period, provided the customer notifies Entegris promptly of any such defect. The exclusive remedy provided herein shallnot be deemed to have failed of its essential purpose so long as Entegris is willing and able to repair or replace any nonconforming Entegris product or part or to refundthe purchase price paid.

Section5:

Warranty

53 ENTEGRIS, INC.


Material Color ChartColor Options

Color Code Tray Color

01 Amber

02 Black

03 Blue

03L Light Blue

04 Red

05 Light Green

05D Dark Green

06 Brown

07 Yellow

Color Code Tray Color

08 Gray

09 Orange

10 Tan

11 Pink

12 White

15 Natural

21 Purple

26 Maroon

Note: Color options are subject to availability at the time of order inquiry.

Section5:

MaterialC

olor

Chart

ENTEGRIS, INC.Corporate Headquarters3500 Lyman BoulevardChaska, Minnesota 55318 USACustomer Service Tel. +1 763-502-0200Toll Free 877-503-0200Customer Service Fax +1 763-502-0300www.entegris.com

Entegris®, Silicon Delivery®, WaferCare®, DeviceCare®, STAT-PRO®, ChipSentry®,i-Tray™ and ChipGuard™ are trademarks of Entegris, Inc.Bayon™ is a trademark of Kreha.TYVEK® and Freon® are trademarks of E.I. du Pont de Nemours and Company.

©2002–2009 Entegris, Inc.Printed in USA2110-5595MAX-0509

bare die, chip scale and wafer scale package handling · entegris,inc. 1 bare die, chip scale...

Documents