bansilal ramnath agarwal charitable trust’s … institute of technology ... to express limits and...
TRANSCRIPT
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 1)
Bansilal Ramnath Agarwal Charitable Trust’s
Vishwakarma Institute of Technology (An Autonomous Institute affiliated to Savitribai Phule Pune University)
Structure & Syllabus of
B. Tech. (Production Engineering)
Pattern ‘A14 Revised’
Effective from Academic Year 2017-18
Prepared by: - Board of Studies in Industrial & Production Engineering
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 2)
Final Year B. Tech. Production Engineering AY 2017-18 (A14 Revised)
Module 7
Course Code
Course Name
Contact Hours / Week
Credits Th.
Proj. Based Lab
Regular Lab
Semester - I
S1 IP451THP Process Engineering 3 2 -- 4
S2 IP452THL Die & Mould Technology 3 -- 2 4
S3 IP453THP Elective 2 Tribology 3 2 -- 4
IP454THP Elective 2 Powder Metallurgy
S4 IP455TLP Elective1 Modern Manufacturing Processes
3 2
--
4
IP456TLP Elective1 Finite Element Method & CAD
Proj IP457PRJ Project -- 2 -- 5
TOTAL 12 8 2 21
Semester - II
S1 IP475INT Semester Internship -- -- -- 15
TOTAL 15
OR S1 IP476GIP Global Internship Program -- -- -- 15
TOTAL 15
OR S1 IP477PRJ Research Project -- -- -- 15
TOTAL 15
OR S1 Elective 3 3 2 -- 3
S2 Elective 4 3 2 -- 3
S3 Elective 5 3 -- 2 3
S4 IP478PS Seminar -- -- 4 2
Proj IP479PRJ Project -- -- -- 4
TOTAL 9 4 6 15
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 3)
List of Electives
Code Subject Name
IP475TH Manufacturing Systems
IP476TH Materials & Operations Management
IP477TH Manufacturing automation
IP478TH Quality Management
IP479TH Supply Chain Management
IP480TH Operations Research
IP481TH Project Management
IP482TH World Class Manufacturing
IP483TH Industrial Robotics
IP485TH Product Development
IP486TH Costing and cost control
IP487TH Financial Management & Management Accounting IP488TH Industrial and Commercial Law
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 4)
FF No. : 654
IP451THP::Process Engineering
Credits: 04 Teaching Scheme: 3 Hours / Week
Unit 1: Product and Process Engineering (…..6 Hours)
Preliminary part print analysis,, Types of dimensions, Measuring geometry of form –
Flatness, parallelism, straightness squareness, angularity, roundness, concentricity and
eccentricity, symmetry surface quality and surface integrity, surface finish affecting product
properties and product cost,
Unit 2: Product Engineering (….9. Hours)
Geometricand Dimensional and tolerance analysis , Types of dimensions, Tolerance analysis-
causes of work piece variations, to express limits and tolerance, tolerance stack, purpose of
tolerance chart, Rules for adding and subtracting, layout of tolerance chart
Unit 3 Work piece Control &Classifying operations (…6.. Hours) Work piece Control & Classifying operations, concept of location, geometrical control,
dimensional control, mechanical control, alternate location, Classifying operations, , Basic
process operations, principal process operations, major operations, auxiliary process
operations qualifying and re-qualifying operations
Unit 4: Selection of Equipment and tooling (….6. Hours)
Selection of Equipment and tooling, Process selection and machine selection, sources for
selection , Process selection and machine selection, sources for selection , factors in
machine selection in terms of cost and design factors, cost analysis, operating cost,
comparative cost analysis, classification of tooling : sources of tooling, tool holders, work
piece holders, General purpose, special purpose machines
Unit 5: Selecting and planning the process (…6 Hours) Selecting and planning the process, Function, Economy and appearance, fundamental rules
for manufacturing process, eliminating operations, combined operations, selecting proper
tooling, availability of equipment, effect of operations speed on performance of economy,
make or buy decision. Computer aided process planning. Engineering approach, basic
design of product, influence of process engineering on product design, specifications,
materials and its cost analysis.
Unit 6: Process sheet design (…7.. Hours)
Process sheet design, Determining manufacturing sequence, Factors for operation
sequence, major process sequence, Operation routing, process picture, process picture
sheet, processing dimensions and views, squaring graph, feature interaction graph, process
planning graph.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 5)
List of Project areas: (For THP, TLP courses) 1. Project 1:-Development of process sheet for prismatic component
2. Project 2:- Development of process sheet for cylindrical component
3. Project3:- Development of process sheet for complex casting component
4. Project 4:- Development of process sheet for machining on CNC machining centre.t
Text Books:
Text Books 1. Process engineering for manufacturing, D. F. Eary, G. E. Johnson, Prentice-Hall
2. Computer aided process planning, P. W. Wang, J. Kelly
3. System approach to computer integrated design and manufacturing, Nanua singh
Reference Books
1. Manufacturing Engineering, H. W. Wage, McGraw hill
2. Manufacturing catalogues for cutting tools and inspection equipments
3. CAD\CAM\CIM- P. Radhakrishnan , S. Subrmaniyum, V. Raju, New Age
International Pvt Ltd
4. Manufacturing Systems Engg, K. Hitomi, John Willey Groover Mikell. P.
5. Fundamentals of modern manufacturing- materials, processes and systems, 2nd edition,
Willey 2002
Course Outcomes: The student will be able to –
1 .Perform preliminary part print analysis of part.
2 Understand concepts of geometric dimensioning and tolerancing in product engineering.
3 Classify operations and achieve work piece control for manufacturing of industrial
products
4 Manage equipment, tools, gauges, manpower and time economically, required for
manufacture of industrial products
5 Select and plan process for manufacturing of industrial products cost effectively.
6 Design process sheet for machined component
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 6)
FF No. 654A
Credits: 04 Teaching Scheme: - 5 Hrs /Week (Theory 3 Hrs/Week +Lab 2hrs/Week)
Hrs/Week
Prerequisites: Material Forming
Unit 1 (7 Hrs)
Design of simple blanking and piercing die
Press working terminology, Basic press working operations, types of presses- mechanical,
hydraulic, pneumatic and their mechanisms, elements of die sets, types of die sets, types of
dies - simple, compound and inverted dies, types of punches, methods of mounting of
punches, center of pressure Mechanism of shear and methods of reduction of shear force,
types of strip layouts, types of strippers, types of stoppers, selection of dowel pins and allen
screws.
Unit 2 (7Hrs)
Design of Progressive die
Progressive and combination dies Shearing forces and staggering of punches, press capacity,
clearances, die & punch size types of strippers, types of pilots, types of stoppers, selection of
dowel pins & allen screws., center of pressure of progressive die. Problems on progressive
and blanking die design.
Unit 3 (6 Hrs)
Design of deep drawing & Bending Dies
Deep drawing mechanism, Design of deep drawing die: blank size, no of draws, drawing
punch and die size, drawing force, press capacity and ironing. Types of Bending dies,
developed length calculation, bending force, spring back & methods used to overcome it,
press brake.
Unit 4 (7 Hrs)
Design of Forging Dies
Design of forging die for multi-impression die-: selection of parting line, drafts, fillet &
comer radii, ribs & webs, stock size calculation, flash & gutter, design of fullering, edging,
blocking, finishing impressions, trimming dies, Die block dimensions, die inserts. Design
of upset forging die: Up setters, stock size calculation, Rules for upset forging.
Unit 5 (6 Hrs)
Design of Injection Molds
Injection molding types, machines, Design of core and cavity, Determination of number of
cavities, types of cooling system, design of cooling channels, heat transfer considerations,
types of ejectors, determination of mould opening force & ejection force
IP452THL:: DIE & MOULD DESIGN
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 7)
Unit 6
Design of Die casting Dies (7 Hrs)
Comparison of die casting with other processes, die casting machines: Plunger type, Goose
neck air type machines, die casting alloys: Al base, lead tin base, zinc base, Mg base, Cu
base, Classification of die casting dies: single impression, combination and multi
impression, details of die design, gating system, details of die construction, die steels.
List of Practical
Design report and drawing of dies and moulds (Any 5)
1. Simple Blanking die Design.
2. Progressive die design.
3. Deep Drawing die design
4. Estimation of developed length and Bending die design.
5. Upset forging design.
6. Forging die design- Closed impression die by CAD
7. Injection mould design by CAD.
8. Die casting die design by CAD
Text Books 1. Donaldson, Lecain and Goold, Tool Design, Tata McGraw Hill, ISBN 0 07 099274
2. J R Paquin, Die design Fundamentals, Industrial Press Inc., ISBN 0 8311 1172 0.
3. Doehler H. H, Die Casting, McGraw Hill
4. P. N. Rao, Manufacturing Technology, Foundry, Forming and Welding,
TataMcGrawHill.
Reference Books 1. P. H. Joshi, Press Tools Design & Construction, Wheeler Pub
2. P. C. Sharma, Production Engineering, S. Chand
3. Dr. Surender Kumar, Production Engg. Design (Tool Design), Satya Prakashan
4. R. G. W. Pye, Injection Mould Design (Design manual for plastic industry), EWP
5. A. S. Athalye, Plastics Materials handbook, Multitech Pub. Co., ISBN 81 7671 007
Course Outcomes :
Student will be able to
1. Understand mechanism of shearing of sheet metals, elements of dies and equipment.
2. Select and design appropriate die set and equipment for shearing operations of sheet
metal.
3. Understand principles of sheet metal forming and design of tools for deep drawing and
bending operations.
4. Apply basic forging operations and design of forging dies.
5. Design elements of injection molding dies and understand working of injection machine.
6. Understand and apply fundamentals of die casting die design principles.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 8)
FF No. : 654
IP458TLP: Machine Tool Design
Credits: 04 Teaching Scheme: Theory: 3 Hours/ Week
Lab: 2 Hours/Week
Unit 1: Design of Machine Tool Drives (10 Hours) Stepped Regulation of Speed, Laws of Stepped Regulation, Why Geometric Progression
is used against Arithmetic, Harmonic & Logarithmic despite shortcomings, Relation
between Range ratio, Geometric Progression Ratio and No. of Speed Steps, 3)Design of
Stepped Drives: Break up of Speed Steps, Structural Formulae, Structural Diagram,
Selection of Best Structural Diagram, Ray Diagram, Speed Chart, General
recommendations for Developing the Gearing Diagram, Determining the number of teeth
of Gears. 4) Speed/ Feed Gear box : Limiting Transmission Ratio of Speed / Feed Gear
Box.
Unit 2: Design of Machine Tool Structure (10 Hours) Function & Requirement of Machine Tool Structure, Design Criteria from Strength &
Stiffness considerations, Concept of Unit Rigidity, Unit Strength under Tension, Unit
Strength under Torsion & Unit Strength under Bending for Material of Machine Tool
Structures, Compare Steel & Cast Iron on the basis of Material Properties, Manufacturing
Problems and Economy, Role of Static & Dynamic Stiffness in the design of elements of
machine tools, Profiles of Machine Tool Structures, Factors affecting stiffness of machine
tool structures & methods of improving it, Basic Design procedure of machine tool
structures
Unit 3: Design of Spindle (6 Hours) Function & Requirements of Spindle Units, their Materials, Effect of Machine Tool
Compliance on Machining accuracy Design of Spindle for Bending Stiffness: Deflection
of Spindle Axis due to a) Bending, b) - due to Compliance of Spindle Supports, c) - due to
Compliance of the Tapered Joint. Optimum Spacing between Spindle Supports,
Permissible Deflection & Design for stiffness: Additional Check for Strength like
Additional Supports, Location of Bearings and Drive elements
Unit 4: Design of Spindle Supports (6 Hours) Requirements of Spindle Supports, Features of Anti-friction Bearings, Load bearing
abilities of Ball & Roller Bearings. Parameters which assess the viability of combination
of roller & Ball & Roller Bearings in Spindle Units. Preloading of Anti Friction Bearing
& its method Design of Sliding Bearings: Sleeve, Hydrodynamic Journal, Hydrostatic
Journal, Air-Lubricated (Aerodynamic, Aerostatic).
Unit 5: Design of Guide-ways (6 Hours)
Design Criteria (Wear Resistance & Stiffness) and Calculations for Slide-ways operating
under semi liquid friction condition, ‘Stick Slip’ phenomena affects accuracy of setting &
working motions. Comparison of Design & stiffness of Hydrodynamic, Hydrostatic &
Aerostatic Slide-ways, Design of Antifriction Guide-way, Concept of Combination
Guide-ways. Function & Types of Guide-ways, Types of Slide-ways & Antifriction Ways,
Functional features of Slide-ways, its Shapes & Materials, Methods of adjusting Clearance;
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 9)
Unit 6: Design of Power Screws (4 Hours) Design of Sliding friction Power Screw for Wear Resistance, Strength, Stiffness, &
Buckling Stability. Design of Rolling friction Power Screw for Strength under static
loading, Strength under cyclic loading, & Stiffness
List of Practicals: 1. Design and Working Drawing of Speed Gear Box for Lathe
2. Design and Working Drawing of Feed Gear Box for Drilling Machine
3. Design and Working Drawing of Spindle for Lathe
4. Design and Working Drawing of Spindle-Support for Lathe
5. Design and Working Drawing of Sliding Friction Power Screw
6. Design and Working Drawing of Rolling Friction Power Screw
List of Project areas:
1. Design Case Studies of Bed of Lathe Column & Base of Milling Machine
2. Design Case Studies of Column of Milling Machine
3. Design Case Studies of Base of Milling Machine
Text Books: 1. N. K. Mehta, Machine Tool
Design, 2
nd Edition, Tata McGraw
Hill, 2011.
2. D. K Pal, S. K. Basu, Design of
Machine Tool, 4
th Edition, Oxford, 2005.
3. G. C. Sen, A. Bhattacharya
Principles of Machine Tool
2nd
Edition New central book agency
Calcutta
1967
Reference Books:
1. N. S. Acherkan, V.
Vermakov
Machine Tool Design Vol 2
1st Edition, MIR
publication 2000.
2. F. Koenigsberger, Design Principles of Metal Cutting
Machine Tools,
1st Edition., The Macmillan
Company 1964.
Course Outcomes:
The student will be able to –
1. Design stepped speed gear boxes
2. Analyze and design various machine tool structure using principle of free body diagram
and using minimum deflection design criterion
3. Design spindles using minimum deflection criterion
4. Design proper bearings for spindle supports
5. Design sliding and rolling friction guideways
6. Design sliding and rolling friction power screws
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 10)
FF No. : 654
IP455TLP Modern Manufacturing Processes
Credits: 04 Teaching
Scheme:
3 Hours / Week +
2 Hours/ Week (Lab) + Project
Prerequisite: Nil
Unit 1: Introduction (6 Hours) Introduction to nontraditional machining methods - Need for non - traditional
machining - Sources of metal removal -Classification on the basis of energy sources -
Parameters influencing selection of process.
Unit 2: Mechanical Processes (10 Hours)
Abrasive Jet Machining – Water Jet Machining – Abrasive Water Jet Machining.
(AJM, WJM and AWJM). Operating principles -Equipment -Parameters influencing
metal removal - Applications -Advantages and Limitations. Ultrasonic Machining,
Operating Principle and Process characteristics.
Unit 3: Thermo Electrical Energy Techniques Electrical
Discharge Machining (EDM)
(8 Hours)
Fundamental principle of EDM, Equipment’s required for EDM process parameters,
process capabilities. Application example trouble shooting, Introduction to wire EDM,
Process principle and parameters, process capacities and its applications.EDM tool
design, Machine tool selection, EDM accessories / applications, electrical discharge
grinding.
Unit 4: Thermal Energy Techniques (8 Hours)
Operating principles - Equipment and sub systems - Parameters influencing metal
removal- Benefits - Applications - Advantages and limitations of Electron beam
machining (EBM), Plasma ARC Machining (PAM) and laser beam machining (LBM).
Electron Beam Machining, EBM Principle and process characteristics.
Unit 5: Electro Chemical Machining (ECM) (4 Hours)
Background of ECM process, Classification of ECM processes. Electrochemistry of
ECM, Equipment required in ECM. Process capabilities and processes parameters.
Evaluation of MRR. Parameters influencing metal removal- Applications - Advantages
and limitations. Electro Chemical Grinding: Process principles, process parameters,
Applications.
Unit 6: Chemical Machining (CHM) (4 Hours) Introduction, Elements of process Chemical blanking process:-Preparation of
workpiece. Preparation of masters, masking with photo resists, etching for blanking,
applications of chemical blanking, chemical milling (Contour machining):- Process
steps – masking, Etching, process characteristics of CHM :-material removal rate
accuracy, surface finish, Advantages & application of CHM. Electro-chemical Drilling
and De-burring operations.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 11)
List of Practicals: Student will do exercises based modeling of following processes in order to predict
MRR, Surface roughness etc. and also they will study parametric correlations of the
process.
1. Exercise on Ultrasonic machining (USM), Abrasive Jet Machining (AJM) and
Abrasive water jet machining (AWJM)
2. Exercise on MRR and surface roughness modeling of EDM process and wire-EDM
process.
3. Exercise on Laser Beam Machining (LBM), Plasma Arc Machining (PAM) and
Electron Beam Machining (EBM)
4. Exercise on Electro Chemical Machining (ECM) and Chemical Metal removal
process
5. Case study on Hybrid material Removal process (ECDM, ECG, EDG etc.)
AND
List of Project areas: Students will perform projects of following processes (Any Two) for experimental
investigation of the process, modeling of the process and process optimization. 1. Abrasive water jet Machining
2. Electro Discharge Machining 3. Laser Beam Machining
4. Wire- Electro discharge Machining
Text Books:
1. V. K. Jain, Advanced Machining
Processes,
Edition
No.,
Allied Publishers Pvt.
Ltd., New Delhi,
2007
.
2. P. K. Mishra, Non-Conventional
Machining,
Edition
No.,
The Institution of
Engineers (India),
Text Book Series,
New Delhi,
1997
.
3. P. C. Pandey
and H. S. Shan
Modern Machining
Processes,
Edition
No.,
Tata McGraw-Hill,
New
Delhi
2007
Reference Books: (As per IEEE format) 1. G. F. Benedict, Unconventional
Machining
Process,
Edition
No.,
Marcel Dekker
Publication, New
York,
1987.
2. McGeough, Advanced
Methods of
Machining,
Edition
No.,
Chapman and Hall,
London,
1998.
3. P. C. Sharma, A Text book of
Production
Engineering
Edition
No.
New Delhi, 1995.
4. P. DeGarmo, J.
T. Black, and
R. A. Kohser,
Material and
Processes in
Manufacturing
Edition
No. 8
Prentice Hall of India
Pvt. Ltd., New Delhi
2001.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 12)
Course Outcomes: Students will be able to:
1. Understand need of advanced machining processes and select process for any industrial
job based on its complexity, cost and specifications required.
2. Apply the working principles and processing characteristics of mechanical type advanced
machining processes such as USM, AJM, WJM and Develop experimental, regression
based, mathematical and physics based models for the advanced machining processes and
predict MRR and surface roughness.
3. Apply the working principles and processing characteristics of electro-thermal type
advanced machining processes such as EDM, wire-EDM and Develop experimental,
regression based, mathematical and physics based models for the advanced machining
processes and predict MRR and surface roughness.
4. Apply the working principles and processing characteristics of thermal type advanced
machining processes such as PAM, LBM, EBM machining to the production of precision
components.
5. Apply the working principles and processing characteristics of chemical type advanced
machining processes such as Electrochemical Machining to the production of precision
micro and macro components.
6. Apply the working principles and processing characteristics of chemical type advanced
machining process for production of precision components.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 13)
FF No. : 654
IP456TLP Finite Element Method & CAD
Credits: 04 Teaching
Scheme:
3 Hours / Week +
2 Hours/ Week (Lab) + Project
Prerequisite: Mathematics for Engineering Applications, Analysis of Machine
Elements
Unit 1: Introduction to FEM (6 Hours)
Introduction to FEA, Basic Steps in FEM, Stresses and equilibrium, boundary
conditions, potential energy approach-Rayleigh Ritz method, Saint Venant’s principle,
Von Mises stresses, Stress-strain relations.
Plane stress and plain strain, Galerkin’s method.
Unit 2: One Dimensional FEM Problems (10 Hours)
One Dimensional Elements: Linear element, shape function & local coordinates,
solution by potential energy & Galerkin’s method, elemental stiffness and load
matrices. Assembly of Global stiffness matrix and Load vector, treatment of boundary
conditions – elimination & penalty approaches, multipoint constraints, quadratic shape
functions, plane trusses, beams & frames.
Application of the above concepts for Problems like truss analysis, temperature
distribution analysis etc.
Unit 3: Two Dimensional FEM Problems (8 Hours) Two Dimensional Elements: Constant strain triangle, Isoparametric representation, shape
functions, Co-ordinate systems – Local & natural, their significance, problem formulation and
solutions by potential energy & Galerkin’s methods, orthotropic materials, four node quadrilateral. Introduction to three dimensional elements & axisymmetric problems.
Application of above concepts for two dimensional and axisymmetric problems.
Unit 4: Geometric Transformations (8 Hours) Introduction to Basic Transformations - Translation, Rotation, Scaling, Reflection,
Homogenous Coordinate system, Concatenated Transformation, Mapping of Geometric Models, Inverse Transformations. Projections - Orthographic, Isometric. Oblique, Perspective.
Unit 5: Generation and Analysis of Curves (4 Hours) Introduction to Parametric representation of curves & its advantages, Analytic Curves- Line,
Circle, Parabolas, Hyperbolas, Ellipses, Conics. Synthetic Curves- Hermite Cubic Spline, Bezier Curve, B-Spline Curve.
Unit 6: Generation and Analysis of Surfaces (4 Hours) Introduction to Parametric representation of Surfaces, Analytic Surfaces - Plane, Ruled,
Tabulated, Revolved surfaces, Synthetic Surfaces- Bezier Surface, B-Spline Surface. Introduction to different volume modelling techniques.
List of Practicals:
1. Formulation of FEM problem by potential energy approach
2. Problems on obtaining elemental stiffness and load matrices
3. Problems on 1D elements- using elimination approach
4. Problems on 1D elements- using penalty approach
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 14)
5. Evaluation of Shape function for Linear triangular elements
6. Problems on 2D elements – constant strain triangle
7. Problems on 2D elements – plates with and without temperature distribution
8. Problems on basic transformations - Translation, Rotation, Scaling, Reflection
9. Parametric representation of curves
10. Problem on synthetic curves
11. Different volume modeling techniques
AND
List of Project areas: Students will perform projects of following processes (Any Two) for experimental
investigation of the process, modeling of the process and process optimization.
1. One Dimensional FEM Problem
2. Two Dimensional FEM Problem
3. Geometric Transformations
4. Generation curves & surfaces
Text Books: 1. Chandrupatla,
Belegundu Introduction to Finite
Elements in Engineering 8
th
Edition
Pearson Education 2014
2. Groover,
Zimmer CAD/CAM: Computer-
aided Design & Manufacturing
7th
Edition
Pearson Education 2010
3 Segerlind L J Applied Finite Element
Analysis John Wiley &
Sons New York 1984
4 Cook R D, Malkus D S &
Plesha M E
Concepts & Applications Of Finite Element
Analysis
New York. John Wiley & Sons
1989
5 Ibrahim Zeid CAD/CAM - Theory & Practice
Tata McGraw Hill
Reference Books: 1. Hughes Thomas
J Finite Element Method -
Linear Static and Dynamic Finite Element Analysis
Dover Pub. New
York 2007
2. Rao P N Introduction to CAD/CAM Tata McGraw
Hill Publishing
Co.
2011
Course Outcomes : Our students will be able to:
1. Understand theories and principles of FEM.
2. Apply potential energy approach for solving one dimensional structural problems
3. Apply potential energy approach for solving two dimensional structural problems
4. Understand and apply the concepts of transformations for representation in CAD
5. Understand concepts of parametric representation of curves and surfaces
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 15)
FF No. : 654
IP457PRJ :: PROJECT
Credits: 05 Teaching Scheme: - Practical 2 Hr/Week
The project work could be of the following nature:
1. Manufacturing /Fabrication of a prototype machine' including selection, concept,
design, material, manufacturing the components, assembly of components, testing and
performance evaluation.
2. Improvement of existing machine / equipment / process.
3. Design and fabrication of Jigs and Fixtures, dies, tools, special purpose equipment,
inspection gauges, measuring instruments for machine tools.
4. Computer aided design, analysis of components such as stress analysis.
5. Problems related to Productivity improvements.
6. Problems related to value engineering.
7. Problems relating to material handling system.
8. Energy Audit of organization, Industrial evaluation of machine devices.
9. Design of a test rig for performance evaluation of machine devices.
10. Product design and development.
11. Analysis, evaluation and experimental verification of any engineering problem
encountered.
12. Quality systems and management. Total Quality Management.
13. Quality improvements, In-process Inspection, Online gauging.
14. Low cost automation, Computer Aided Automation in Manufacturing.
15. Time and Motion study, Job evaluation.
16. Ergonomics and safety aspects under industrial environment
17. Management Information System.
18. Market Analysis in conjunction with Production Planning and Control.
OR
Fabrication of models, machines, prototypes based on new ideas, robots and machine
based on hitech systems and automation, experimental set-up, fabrication of testing
equipment, renovation of machines, etc. Computer based design / analysis or modeling /
simulation of product(s), mechanism(s) or system (s) and its validation or comparison
with available benchmarks / results. Modelling/simulation of product(s), mechanism(s) or
system(s) and its validation or comparison with available bench marks / results.
Design/development and Fabrication of models, machines, and prototypes based on new
ideas, robotic and automation systems, Experimental set ups, test rigs/ equipments.
The project work shall be taken up individually or in a group consisting of not more than 4
students.
A report containing maximum 30 pages shall be submitted based on the background, need
and scope of the project, project specifications, activities involved in the project and
activity plan, study of literature and basic theory, and work completed (if any).
Guidelines:
• Report shall be typed or printed.
• Figures and tables shall be on separate pages and attached at respective positions.
• Project title and approval sheets shall be attached at the beginning of the report
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 16)
followed by index and synopsis of the project.
• References shall be mentioned at the end followed by appendices (if any).
• When a group of students is doing a project, names of all the students shall be
included on every certified report copy.
Each group of students shall submit two copies of reports to the institute and one copy
shall be prepared for each individual student.
Course Outcomes :
Students will be able to:
1. Survey literature for problem identification
2. Cultivate the habit of working in a team, communicate effectively and attempt a
problem solution in a right approach
3. Correlate the theoretical and experimental/simulations results and draw the proper
inferences.
4. Apply engineering knowledge in carrying out project starting from design, drafting,
process planning, project management, costing, manufacturing, QC and inspection,
down to assembly, testing and evaluation.
5. To practice data collection and analysis using different measurement equipment’s and
software packages.
6. Prepare project report as per guideline and present it effectively
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 17)
FF No. : 654
IP453THP Tribology
Credits: 04 Teaching Scheme: Theory: 3 Hours / Week
Lab: 2 Hours / Week
Unit 1: Hydrodynamic Lubrication- Pad bearings (8 Hours) Mechanics of fluid flow, Reynold’s equation; Simplifying assumptions, Equilibrium of
an element, Continuity of flow in a column, Simplifications to the Reynolds equation,
Unidirectional velocity approximation, Steady film thickness approximation,
Isoviscous approximation, Infinitely long bearing approximation, Narrow bearing
approximation, Bearing parameters predicted from Reynolds equation. Infinitely long
pad bearings, Infinite Rayleigh step bearing, Finite pad bearings. Pivoted pad bearing.
Unit 2: Hydrodynamic Lubrication – Journal bearings and
squeeze film bearings
(8 Hours)
Converging-diverging wedges- Bearing geometry Pressure distribution- Full-
Sommerfeld boundary condition, Half-Sommerfeld boundary condition, Reynolds
boundary condition. Journal bearings, Evaluation of the main parameters- Bearing
geometry, Pressure distribution, Load capacity Friction force, Coefficient of friction
Lubricant flow rate, Practical and operational aspects of journal bearings.
Hydrodynamic squeeze film bearings
Unit 3: Friction and wear (6 Hours)
Theories of friction, types of wear, Abrasive wear, mechanism and modes of abrasive
wear, Analytical models of abrasive wear. Mechanism of erosive wear. Cavitation wear
mechanism. Adhesive wear mechanism, metal to metal adhesion, Effect of adhesion
between wearing surfaces. Control of adhesive wear. Abrasive Wear Resistance of
Materials, Transfer films in Adhesion
Unit 4: Hetrzian contact (6 Hours)
Hetrz contact stress theory, Contact between two elastic spherical or spheroidal bodies,
Geometry of contacting elastic bodies, Contact area, pressure, maximum deflection and
position of the maximum shear stress - Contact between two spheres, Contact between
a sphere and a plane surface, Contact between two parallel cylinders, Contact between
two parallel cylinders, Elliptical contact between two elastic bodies, general case.
Elastohydrodynamic lubricating films
Unit 5: Elasto-hydrodynamic lubrication (6 Hours)
Effects contributing to the generation of elastohydrodynamic films- Hydrodynamic film
formation, Modification of film geometry by elastic deformation, Transformation of
lubricant viscosity and rheology under pressure. Approximate solution of Reynolds
equation with simultaneous elastic deformation and viscosity rise, Pressure distribution
in elastohydrodynamic films, Elastohydrodynamic film thickness formulae,
Elastohydrodynamic film thickness measurements
Unit 6: Hydrostatic bearings (6 Hours) Hydrostatic bearing analysis, Flat circular hydrostatic pad bearing- Pressure
distribution, Lubricant flow, Load capacity, Friction torque Friction power loss. Non-
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 18)
flat circular hydrostatic pad bearings -Pressure distribution, Lubricant flow, Load
capacity, Friction torque, Friction power loss. Generalized approach to hydrostatic
bearing analysis- Flat circular pad bearings, Flat square pad bearings. Optimization of
hydrostatic bearing design -- Minimization of power(Low speed recessed bearings,
High speed recessed bearings), Control of lubricant film thickness and bearing stiffness
(Stiffness with constant flow method, Stiffness with capillary restrictors, Stiffness with
an orifice, Stiffness with pressure sensors) Gas lubricated bearings- Aerostatic
bearings, Pressure distribution, Gas flow, Load capacity, Friction torque, Power loss
List of Projects 1. Journal Bearing Test: Parametric study of the pressure distribution and frictional torque in the journal bearing.
2. Pin-on-Disc Test: Investigation of the Tribological behavior of various marerials in terms of
Friction and Wear measurement
3. Four-Ball Test: To investigate the Wear preventive ability (WP), Extreme pressure capacity
(EP), and Friction behavior of lubricants operating under non-conformal (point contact) contact
condition.
Text Books: 1. G. W. Stachowiak,
A. W. Batchelor
Engineering
Tribology, 2nd Edition, Butterworth
Heineman, 2001.
2. A. Cameron, Basic Lubrication
Theory,
3rd Edition Longman, 1971.
3. P. Sahoo, Engineering
Tribology 2
nd Edition Prentice
Hall of India 2005.
Reference Books: 1. D. A. Rigney, Fundamentals of
Friction and
wear of
Materials
2nd
Edition American
Society of
Metals
1980
2. N. S. Grassam, J. W.
Powell Gas Bearings, 1
st Edition Butterworths 1964
Course Outcomes:
The student will be able to –
1. Apply the principles of dry sliding wear in order to minimize friction and wear in mating
surfaces.
2. Analyze hydrodynamic pad bearings using principles of hydrodynamics.
3. Analyze hydrodynamic journal bearings using principles of hydrodynamics.
4. Analyze surfaces in Hertzian contact.
5. Analyze lubrication phenomenon in non-conformal contacts using elasto-hydro dynamics
principles.
6. Design hydro-static bearings.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 19)
FF No. : 654
IP454TLP:: Powder Metallurgy
Credits: 04 Teaching Scheme: 3 Hours / Week
Unit 1: Powder Production (7 Hours) Historical development, Basic principles of Powder Metallurgy, Classification of metal
powder production methods. Reduction, Atomization & developments in it. Electrolysis
etc. Characteristics of powders and properties - production methodology and quality
control. Preparation of powder: grading, sizing, blending, handling and storage. Testing of
powders. Particle size distribution, surface conditions, purity, flow properties, porosity,
true and apparent density, Green compact strength.
Unit 2: Compaction (6 Hours)
Fundamentals of compaction, presses used, selection of presses, Automation and Handling
of powder, tool clearances, Die design principles, wear reclamation, Die and punch
materials selection and heat treatment, surface treatment properties, compact density
variations, effect of blending powders, lubricants and lubrication in process. Pressure less
powder shaping. Improvement of press tool life.
Unit 3: Sintering (7 Hours) Principle, time temperature effects, Theories of sintering mechanism. Sintering methods,
sintering furnaces-characteristics and selection. Dimensional and property changes after
sintering, Rapid sintering processes, impregnation. Liquid phase sintering, Activated
sintering. Dimensional changes during sintering. Sintering atmosphere and its impact on
process performance.
Unit 4: Special P.M. Processes (7 Hours) Special PM processes like Hot Compaction, Iso static pressing, Hot Iso static compaction
merits, demerits and typical applications. Powder metal products with polymer blends,
Powder roll compaction. P.M. Forging, Powder Extrusion, Injection molding, Hot powder
forging ,Hot powder extrusion. Comparison between various special PM processes
Unit 5: Secondary Operations & Economics of Powder Metallurgy (6 Hours) Secondary operations like sizing , coining Oil impregnation, heat treatments ,Steam treatment
Economics, Quality assurance, Manufacturing Competitiveness due to conservation of
energy, Materials, Operations, Durability, rigidity, near net – shape, surface finish and
machining. Advantages and limitations of Powder Metallurgy.
Unit 6: Powder Metallurgy Applications (7 Hours) Production details of common PM structural parts like gears, levers, ratchets, etc. lamp
filament and filament support, refractory metal components, electrical contact material,
Cemented Carbide tools and wear parts, brakes and clutch lining material, porous bearings
and filters, catalytic components etc. Production of nano composites
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 20)
List of Project areas: 1. Study the effect of cold compaction pressure on density
2. Characterization of metal powder
3. Study of defects in P/M parts
Text Books: 1 A.K Sinha, D.P. Tai, A Textbook of Power Metallurgy
2. A, F.Thummler and R.Oberacker, An Introduction to Powder Metallurgy, The Institute of
Materials, London
3. Anish Upadhyaya & G. S. Upadhyaya, Powder Metallurgy Science, Technology &
Materials,
Reference Books:
1. Powder Metallurgy ASM Handbook Vol.VII
Course Outcomes:
The student will be able to –
1. Select most appropriate powder manufacturing technique for cost effective
manufacturing of powder component & characterize metal powder.
2. Select & apply different compaction techniques
3. Sintering techniques to obtain near net shape powder metallurgy parts.
4. Understand various special powder metallurgy techniques and secondary operations
5. Understand advantages, limitations and economics of powder metallurgy process
6. Understand typical applications of Powder Metallurgy
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 21)
FF No. : 654
IP475TLP::Manufacturing Systems
Credits: 03 Teaching Scheme: 3 Hours / Week
Unit 1: Hard automation (…8.. Hours)
Automation and mechanization, levels of automation, types of automation, hard automation-
Capstan and Turret lathes, single spindle automats, multispimdle automats, spms, Transfer
lines, types, work part transfer mechanisms, control of production line, transfer line
performance
Unit 2: Soft automation (….8. Hours)
Soft automation, CNC, NC/CNC machine programming: construction, classification,various
axes in NC machines, G & M code programming
machining centers, computer aided programming
Unit 3: ROBOTICS: (….7. Hours)
Robotic system ,Components, Configuration,Drive systems,grippers,sensors, Machine
vision system,direct and inverse kinematics.,Applications of robots.
Unit 4: Computer aided manufacturing, CIM and FMS (…5.. Hours) Computer aided manufacturing, CIM and FMS, DNC, cellular manufacturing, group
technology, flexible manufacturing systems. FMS planning and implementation, Elements of
CIM system
Unit 5: Automatic material handling and inspection (…6.. Hours) Automatic material handling and inspection, Automated guided vehicles systems, analysis
conveyor systems, automated inspection, carousel storage systems, automatic gauging system
Unit 6: Factory automation , Assembly systems (6….. Hours) Factory automation, Assembly systems, automated assembly, design for automated
assembly, vibratory bowl feeders, hopper feeders, rotary disc feeders.
Synchronous and non synchronous material transfer, centrifugal, revolving feeders
List of Practicals: (For THL, TLP courses)
1. Programming using linear interpolation on CNC machine.
2. Programming using circular interpolation on CNC machine.
3. Programming using automatic canned cycles on CNC machine
4. Programming using complex functions on CNC machine
5. Analysis of transfer lines with no internal storage
And
List of Project areas: (For THP, TLP courses) 1.Project 1:-Manufacturing of simple job on Technofour CNC TMW200 machine
2.Project 2:- Manufacturing of complex job on Technofour CNC TMW200 machine
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 22)
Text Books: 1. Automation,Production Systems and Computer Integrated Manufacturing-Mikell P
Groover ,Pearson Education Asia,2001
2. CNC Technology & Programming- Krar, Gill- McGraw- Hill International Editions-
1990.
Reference Books: 1. Mechanisation by pneumatic control-Werner Deport and Kurt Stool,Vol.1,2
2. Manufacturing Engineering & Technology- Kalpak Jian- Addison Wesley Publishing
Company Third Edition-1995
3. P. Radhakrishnan , S.Subrmaniyum, V.Raju, “CAD\CAM\CIM”- New Age International
Pvt Ltd
Course Outcomes:
The student will be able to –
A student should be able to
1. Understand hard and soft automation
2. Study construction and working of CNC machines
3. Study various elements and applications of industrial robots
4 Understand concepts of CAM, CIM and FMS
5. Understand and Analyze performance of automated conveyance and inspection systems
6. Understand principles of automated assembly systems
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 23)
FF No. : 654
IP477TLP::Manufacturing Automation
Credits: 04 Teaching Scheme: 3. Hours / Week
Unit I Introduction to Mechatronics Introduction to Mechatronics – Conventional and Mechatronics approach in designing
products - Mechatronics design process - Mechatronics in Manufacturing – Adoptive and
distributed control systems – Modeling and simulation of mechatronics systems.
Unit II Sensors
Overview of sensors and transducers – Microsensors - Signal conditioning – Operational
amplifiers – Protection – Filtering - Analog and Digital converters.
Unit III Actuators
Electro – pneumatics and Electro – hydraulics - Solenoids – Direct Current motors –
Servomotors – Stepper motors - Micro actuators; Drives selection and application.
Unit IV Microprocessor based Controllers
Architecture of microprocessor and microcontroller – System interfacing for a sensor,
keyboard, display and motors - Application cases for temperature control, warning and
process control systems.
Unit V Programmable Logic Controllers Architecture of Programmable Logic Controllers – Input/Output modules – programming
methods – Timers and counters – Master control – Branching – Data handling – Analog
input/output
Unit VI Intelligent Mechatronics and Case Studies
Fuzzy logic control and Artificial Neural Networks in mechatronics – Algorithms –
Computer – based instrumentation - Real-time Data Acquisition and Control – Software
integration - Man- Machine interface -Vision system – Mechatronics system case studies.
Practicals/projects Mechatronics system design -Project1,2,3,4
Text Books:
1. Bolton .W, (2008), Mechatronics, 4rd Edition, Pearson Education.
References: 1. Devdas Shetty, Richard A. Kolk (2011), Mechatronics System Design, PWS Publishing
Company
2. Dan Necsulescu, (2002), Mechatronics, 3rd Edition, Pearson Education
3. Michael B. Histand and David G. Alciatore (2005), Introduction to Mechatronics and
Measurement systems, McGraw-Hill.
4. B.P. Singh (2002), Advanced Microprocessor and Microcontrollers, New Age
International Publisher.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 24)
Outcomes: Student will be able to
1. Identify the elements of mechatronics system.
2. Select suitable sensors to meet specific requirements
3. Select actuators to meet specific requirements
4. Select controllers to meet specific requirements
5. Understand PLC and applications.
6. Demonstrate intelligent mechatronics system for engineering applications.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 25)
FF No. : 654
IP479TH::Logistics & Supply Chain Management
Credits: 04 Teaching Scheme: - Theory 3 Hrs/Week & Lab 2Hrs/Week
Unit I (7 Hrs)
Logistics Management
Logistics Management – Definition, Logistics Function: Transportation – Significance,
Modes of Transportation, Warehousing – Objectives, Warehousing Functions, Types of
Warehouses, Inventory Management, Order Processing – Role of IT, Material Handling,
Transportation: Modes of Transportation – Rail, Road, Pipelines, Water Air – Advantages
& Disadvantages, Concept of TL, LTL, FTL. Modes of Transportation – Rail, Road,
Pipelines, Water Air – Advantages & Disadvantages, Selections of Appropriate Modes of
Transportation
Unit II (7 Hrs)
Warehouse Management
Warehouse Management: Concept of SKUs, Warehousing Principles & Best Practices in
Receiving, Shipping, Order Picking, Storage & Put away, Warehouse Activity Profiling,
Warehouse Layout Planning. Stores Management: Functions of Stores, Stores Procedure –
Documentation. Need of physical stock taking, method of stock taking like annual,
continuous, reorder point stock taking, Inventory records. Surplus and Obsolescent stocks:
Introduction, Genesis of surplus materials. Disposal of surplus and obsolete materials,
Stores Documentation – Bin Cards, Stores Ledger. WMS Systems in Practice
Unit III (7 Hrs)
Concept of SCM
Supply Chain: Concept, Objective. Decision Phases in Supply Chain. Process View of
Supply Chain – Cycle View, Push/pull view, Supply Chain Performance – Achieving
Strategic Fit. Types of Supply Chain – Responsive, Efficient, Achieving Strategic Fit.
Supply Chain Drivers – Facilities, Inventory, Transportation, Information. Importance of
Supply Chain, Examples of Supply Chain
Unit IV (7 Hrs)
Network Design in Supply Chain
Factors Influencing Distribution Network Design – Response time, Product variety,
Product availability, Customer experience, Order visibility, Return ability.
Logistics Modeling: Location – Allocation Models Multiple Facility Location Models:
Baumol Wolf Method, Add & Construction Heuristic,
Allocation Models: Transportation Model: Variants, Special Cases, Solution - Vogel’s
Approximation Method, Optimality Methods – UV Method, Stepping Stone Method,
Transshipment problems. Traveling Salesman Problem, Vehicle Routing Problem
Unit V (6 Hrs)
Planning Demand, Supply and Inventories in a Supply Chain
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 26)
Managing Supply: Different strategies of managing Capacity and Inventory, Managing
Demand: Variable pricing, Forward buying,
Managing Economies of Scale: Cycle Inventory- Role in SC - Lot sizing for single product,
multiple products or customers, Aggregating multiple products in single order
Managing Uncertainty: Safety Inventory – Role in SC – Determine appropriate level of
safety inventory.
Collaborative Planning Forecasting & Replenishment, Demand Forecasting & Aggregate
Planning in Supply Chain.
Unit VI (6 Hrs)
Co-ordination & Technology in the Supply Chains
Co-ordination in Supply Chain: Lack of SC Coordination & Bullwhip Effect. Effect on
Performance. Obstacles to SC Coordination. Manager Levers to Achieve Coordination.
Information Technology and Supply Chain: Role of IT in SC Supply Chain IT Framework.
E-business & Supply Chain, Building Strategic Partnerships and Trust within a Supply
Chain. Future of IT in Supply Chain. Cases on E-business and supply chains
List of Practicals:
Assignments
1. Detailed Study of Supply Chain of any one company in an Industry of your choice
2. Study of Industry Based on ETIG SCM CD
3. Numerical & Cases on Facility Location Models- Single and Multiple Facility
4. Location & Location - Allocation Models
5. Numericals & Caselet on Demand Forecasting
6. Case let on Aggregate Planning
7. Case let on Inventory Management
8. Numerical and Cases on Travelling Salesman Problem
9. Numerical and Cases on Vehicle Routing Problem
10. Comprehensive Case Study or Research paper study on SCM
11. Computerized Simulation Game or Case Study on Logistics Modeling
12. Industrial Visit
Text Books 1. Sunil Chopra & Peter Meindl, Supply Chain Management - Strategy, Planning &
Operation –, Pearson Education, Sixth edition (17 June 2016)
Reference Books 1. Bowersox, Logistical Management - The Integrated Supply Chain Process
2. Martin Christopher, Logistics & Supply Chain Management, Fifth Edition, Pearson,
2011
3. G Raghuram, Logistics & Supply Chain Management, McMillan Publications
4. Ronald Ballou, Business Logistics / Supply Chain Management, Peason Education.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 27)
Course Outcomes: Students will be able to:
1. Analyze and select the appropriate modes of transportation and warehousing processes
2. Identify the key elements and processes in a supply chain and their interaction
3. Analyze, design and optimize supply chain networks for manufacturing organizations
4. Identify the techniques used in management of critical components of supply chain
5. Explain the likely future development of logistics and supply chain management
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 28)
FF No. : 654
IP476TH Materials and Operations Management
Credits: 04 Teaching Scheme: 03 Hours / Week
Unit 1: Functions of Materials Management (06 Hours)
Introduction, Classification and Costs of Inventories: Types, Objective of holding inventories,
Costs Associated with Inventory - Carrying cost, Procurement cost & Ordering Cost. Different types of Inventories, EOQ - Concept, Assumptions of EOQ Model, EMQ Model -Carrying cost,
Set up cost, Shortage Cost. Inventory. Practical Constraints vs Theoretical EOQ Value, Numerical
Analysis, Quantity Discounts method. Deterministic Inventory Model- Calculation of EOQ considering Investment, Space Availability.
Unit 2: Lead Time (07 Hours)
Components of Lead Time - Internal and External. Variability in demand and lead time.
Probabilistic Replenishment System. Replenishment Systems: Introduction, Concept of
lead time and its effects on Safety Stock & Reserve Stock Evaluation. Ways to minimize
lead time, Different types of replenishment systems like Fixed order quantity system,
Fixed order interval system, Combination of fixed order interval and quantity system,
Two Bin System, Symptoms of Poor Inventory management, Selective Inventory Control:
Concept of ABC analysis, Selective Inventory Control - VED analysis, HML analysis,
SDE analysis, SOS analysis, FSN analysis, GOLF analysis
Unit 3: Procurement Management (07 Hours)
Responsibilities of Purchase Department. Procurement Procedure, Documents in Procurement, Methods of Buying, Legal Aspects of Buying, Vendor Development, Vendor Selection methods
like Vendor Rating Method, Analytical Hierarchy Process (AHP), Saaty rating Scale used In AHP
, Categorical Method. Import-Export Procedure – Imports & Exports, Documentation – Bin Cards, Stores Ledger, Goods Receipt Note, Material Requisition, Purchase Order – Format, Terms &
Conditions. Documentation in Imports
Unit 4: Inventory Management & Selective Inventory Control (07 Hours)
EOQ & Quantity Discounts, Probabilistic Replenishment System (Inventory Models). Selective
Inventory Control Techniques. ABC analysis VED analysis, HML analysis, SDE analysis, SOS analysis, FSN analysis, GOLF analysis. EMQ Model - Carrying cost, Set up cost. EOQ Special
Considerations – Spares, Bought-outs, etc. Symptoms of Poor Inventory management, Measuring
Effectiveness of Inventory Function (Inventory Turnover Ratio, Average Inventory, etc.)
Unit 5: Material Requirement Planning (MRP ) (07 Hours)
Operations Planning & Control – PPC – Functions, Operations Planning & Control Framework. Material Requirement Planning (MRP I): Inputs to MRP – MPS, BOM – Types of BOM, BOM
Explosion, Inventory Transaction Files, MRP Processing (Logic) – Time Phased Operation Plan,
Numerical on BOM Explosion Netting Requirements, Outputs of MRP.
Unit 6: Manufacturing Resource Planning (MRP II) (06 Hours)
Operations Control – Gantt Charts. Planning & Scheduling Techniques: Scheduling v/s Loading, Scheduling Types – Forward Scheduling & Backward Scheduling Scheduling Techniques –
Dispatching Rules – SPT, LPT, Johnson’s method – Johnson’s rule for 2,3 and M machines
problem, Slack per operations Critical Ratio, EDD, etc. –Evaluate lateness, tardiness.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 29)
List of Practicals:
1. Assignment on Costs of Inventories, Assignment on EOQ
2. Assignment on EOQ – Practical Constraints – Quantity Discounts, Shelf Life, Packing
3. Constraints
4. Assignment on Replenishment Systems – Deterministic Model
5. Assignment on Replenishment Systems – Probabilistic Model
6. Numerical Assignment based on Vendor Rating
7. Numerical Assignment based on AHP Method used for – Vendor Selection
8. Numerical Assignment based on transportation costs like Terminal Handling Cost
9. Assignment on Selective Inventory Control
10. Case – Purchase Management
11. Case – Vendor Selection, Vendor Rating
Text Books: 1. L.C. Jhamb Inventory
management 2nd Edition Everest
Publishing House
2009
2. Panneerselvam, Production &
Operations Management
Revised Edition McGraw
Hill Publications
Year.
2007
Reference Books: 1. Dobler Burt Material
Management 2nd Edition McGraw
Hill
1971
2. John Willey and sons Inventory Control
and Management
2nd Edition Silver and
Peterson
2003
Course Outcomes: The student will be able to –
1. Understand need of various functions in production planning and control for better
management of manufacturing and/or service systems.
2. Apply various methods to reduce lead time in manufacturing and services organizations
3. Analyze, assess and develop vendor selection and rating systems for manufacturing
organizations for effective procurement of materials.
4. Design inventory replenishment systems for manufacturing and services organizations to
optimize the inventory levels for organizations.
5. Develop master production schedule, and material requirements plans for manufacturing
and service organizations.
6. Develop complete schedule of organization as a part of resource requirement planning.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 30)
FF No. : 654
IP480TH::Operations Research
Credits: 04 Teaching Scheme: 03 Hours / Week
Unit 1: INTRODUCTION & FORMULATION OF LP MODEL (10 Hours)
OR methodology, Definition of OR, Application of OR to engineering and Managerial
problems, Features of OR models, Limitation of OR, formulation LPP Models. Definition,
mathematical formulation, standard form, solution space, solution – feasible, basic feasible,
optimal, infeasible, multiple, optimal, Redundancy, Degeneracy. Graphical and simplex
methods. Variants of simplex algorithm – Artificial basis techniques, Big M Method
Unit 2: QUEUING THEORY - (06 Hours)
Queuing Theory: Introduction, terminology, Customer Behaviors, Different Queuing Models,
( M /M /1): (GD/∞/∞) Model, , ( M /M /1): (GD/N/∞) Model, ( M /M /1): (GD/ N / N)
Model, ( M /M /C): (GD/∞/∞) Model ( M /M /C): (GD/N/∞) Model, ( M /M /C): (GD/ N / N)
Model, Tandem queuing concept- M/Ek/1 Model.
Unit 3: SIMULATION MODELLING (06 Hours) Simulation: Definition, Introduction to Monte Carlo Simulation., Application, Different
Problems solved using Monte Carlo Simulation, Using Applications of Simulation,
Generation of Random Numbers. Simulation software, Building Model on Simulation
Software, Running the simulation, Understanding the results
Unit 4: GAME THEORY & REPLACEMENT ANALYSIS (06 Hours) Introduction, two -person zero sum game, minimax and maximin principle, saddle point,
methods for solving game problems with mixed strategies, Graphical and iterative methods,
solving game by LP Method. Replacement of capital equipments that deteriorates with time,
time value of money (a) remains same (b) changes with constant rates during period.
Equipment renewal policy, group and individual replacement. Individual Replacement,
Group Replacement Policies, Problems
Unit 5: INTEGER AND DYNAMIC PROGRAMMING (06 Hours) Integer Programming: Branch & bound, cutting plane method. Dynamic
Programming: Introduction, application, capital budgeting, different problems solved by
dynamic programming
Unit 6: GOAL PROGRAMMING & DECISION MAKING TOOL (06 Hours) Goal Programming & Decision Making Tools: Goal Programming-Definition, Introduction,
Problems, Analytical Hierarchy Process, Decision Tree – Logic. Decision making under risk
(EMV criteria) and Decision making under uncertainty
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 31)
List of Practicals: 1 Assignment on Sensitivity Analysis in Linear Programming Problems
2. Assignment based on any two Models of queuing theory & Multi stage queuing Model
3. Assignment based on replacement models & Game theory problems.
4. Assignment on Integer programming & on Dynamic programming
5. Assignment on Goal programming and on decision making tools.
6. Health Care System for outpatient treatment of any Multi specialty hospital.
7. Simulation on Multiple stage Queuing application.
Project work based on designing of a simulation model using any available simulation
software like Promodel, Simio-3D
Text Books: 1. Panneerselvam, Production & Operations Management,3
rd Edition, McGraw Hill
Publications,
Reference Books: 1. Chary, Production & Operations Management –1
st Edition, McGraw Hill Publications
2. Tony Arnold, Materials & Operations Management –1st Edition, Pearson Publications
Course Outcomes: The student will be able to –
1. Understanding of Functions of Materials Management and its usefulness.
2. Understanding of Components of Lead Time
3. Understanding different purchasing systems used
4. Understanding different transportation techniques & modes used
5. Understanding warehouses and SKU used in Production system
6. Understanding of logistics Outsourcing & customer service
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 32)
FF No. : 654
IP481TH Project Management
Credits: 03 Teaching Scheme: 3 Hours / Week
Unit 1: Introduction: (6 Hours) Definition & Characteristics of Project, Performance Parameters: Time, Cost &
Quality. Difference with respect to Standard Routine Production. Classification of
Projects: Sector based, Investment based, Technology based, Causation based, Need
based (BMERD) - Balancing, Modernization, Replacement, Expansion &
Diversification Project Life Cycle Phases – Concept/Initiation Phase: Parameters
Involved in Project Identification. Sources of New Project Ideas,
Governmental Framework for Identification of Opportunities, Incentives from state &
central govt.; Import-substitution projects.
Unit 2: Project Conceptualization & Feasibility Analysis (8 Hours) Project Definition Phase: Project Formulation & Feasibility. Types of Feasibility
Studies – Pre-feasibility, Support/Functional, Feasibility Study. Preparation of Project
Feasibility Report & Specification; Aspects of Project Feasibility
Managerial/Organization: Promoters Background, Criteria of Evaluation,
Marketing/Commercial: Demand & Supply, Competition, Market Survery, Porter’s 5
Forces, Operational/Technical: Process, Technology, Location, Capacity, Labour, Raw
Material & Utility Availability. Financial: Cost of Project, Means of Finance, Financial
Projections – Profit & Loss Account, Balance Sheet, Funds Flow Statement, Cash Flow
Statement, Schedule of Fixed Assets, Schedule of Term Loans.
Socio-Economic: Socio-Cost Benefit Analysis. Effective Rate of Protection, Domestic
Resource Cost
Unit 3: Project Planning, Implementation & Control (8 Hours)
Planning & Organization Phase: Project Planning, Scheduling & Monitoring, Statement
of Works, Project Specifications, Work Breakdown Structure, Network Analysis &
Duration Estimating Network Diagrams – PERT/CPM, Estimate Activity Times,
Milestone Scheduling. Resource Leveling, Resource Smoothening, Project Crashing.
Implementation Phase: Activities Involved: Erection & Commissioning, Installation,
Trial Runs & Commencement of Commercial Production. Cleanup/Shutdown Phase:
Handover to Client, Settlement of Accounts
Unit 4: Project Cost Management (8 Hours)
Project Cost Estimation: Need, Causes of Cost & Time Overruns. Nature of Cost
Estimates, Types of Project Cost Estimates, Estimation of Manpower & Utilities.
Project Budgeting & Control, Earned Value Management System: Concept of AC, PV,
EV, Variances, etc.
Unit 5: Project Risk and Contract Management (6 Hours) Contract Management: Responsibility Sharing Matrix, Types of Contract Payments,
Risk Factors in Contracts – Contractor & Owner. Critical Chain Project Management.
Project Management Information System and Control, Management Pitfalls
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 33)
Unit 6: Computer Applications in Project Planning & Control (8 Hours) Introduction to MS Projects – Understanding the MS Project screen & different views,
Defining the project, Working with calendar, Outline the project, Create dependencies
between tasks, Creating WBS, Format task list and Gantt chart, Resource planning,
leveling and preparing resource graph, Working with baseline, tracking the project.
Home Assignment on Exercise with MS Projects Software.
List of Practicals:
1. Preparation of Project Feasibility Report
a. Project Identification, Definition
b. Project Feasibility – Managerial/Organizational Perspective
c. Project Feasibility – Marketing, Exit Plan
d. Project Feasibility – Operational
e. Project Feasibility – Financial, Financial Projections
2. Assignment on Capital Budgeting – PBP, Discounted PBP, NPV, IRR, Annual
Worth
3. Numerical on PERT/CPM – Calculation of Floats, Determination of Critical Path &
Project Duration
4. Case let - Project Crashing
5. Case let - Resource Leveling & Resource Smoothening
6. Project Planning & Scheduling (Using MS Projects) 1 – Preparation of Statement of
Works, WBS
7. Project Planning & Scheduling (Using MS Projects) 2 – Network Diagram, Gantt
Charts, Project Monitoring
Text Books:
1. Narendra Singh Project Management &
Control Himalaya
Publishing House,
Mumbai.
2. Prasanna Chandra Project: Preparation,
Appraisal, Budgeting & Implementation
3. Pinto Project Management
– Achieving
Competitive
Advantage & MS
Projects
Pearson
Education
Reference Books: 1. Maylor Project
Management
Pearson
Education
2. Gopal &
Ramamurthy
Project
Management
Handbook
Macmilan
3. PMI Project
Management Body of
Knowledge
3,4,5 PMI
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 34)
4. Ghatak & Sandra Practical Project Management
Pearson Education
(Singapore)
Pte. Ltd
2001
5. SARDA Handbook on
Project Appraisal
& Follow-up
Govind
Prakashan 2001
Course Outcomes:
The student will be able to –
1. Learn the basic concepts of project and project management
2. Ascertain the feasibility of small and medium projects with respect to managerial,
marketing, operational, financial and socio-economic perspectives
3. Plan and schedule small and medium projects to achieve the triple constraint of time, cost
and quality using software package
4. Understand the concept of earned value management system and critical chain in
managing projects
5. Monitor the progress of projects to determine variances and recommend corrective
actions using software package
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 35)
FF No. : 654
IP482TH::World Class Manufacturing
Credits: 04 Teaching Scheme: Theory 3 Hrs/Week
Lab/Project 2Hrs/Week
Unit 1: WCM & Lean Manufacturing (7 Hours) Introduction To World Class Manufacturing. Lean Manufacturing – Definition & Concept.
Characteristics of Lean Manufacturing. Lean Mfg Tools & Techniques, Hall’s, Schonberger,s
framework of World Class Manufacturing, Various models of world class manufacturing,
Concept of MUDA, MURA & MURI. Value Stream Mapping – VSM Symbols, Current
State v.s Future State, Kaizen Bursts.
Unit 2: Lean Manufacturing Tools & Techniques - 1 (6 Hours)
Design of JIT-Pull System, Kanban – Types, Calculations of Kanban, Set-up Time
Reduction: SMED Methodology for Set-up reduction, Set-up Reduction Projects, Quick
Attachment Devices, Jidoka – Autonomation, Andon Principles, Problem Solving Approach,
Toyota 14 Principles of Management.
Unit 3: Lean Manufacturing Tools & Techniques - 2 (6 Hours)
Concept of Standard Work – Standardization, Standard Operating Procedures,
Group Technology Approaches, Characteristics Of A Group/ Cell Families Of Parts,
Production Flow Analysis And Choice Of Family, Benefits And Applications Of Group
Technology. Cellular Manufacturing: Work cell concepts and applications, Work cell design,
work cell staffing and equipment issues, Group Technology – Codification & Classification
Systems.
Unit 4: Total Productive Maintenance (7 Hours)
Maintenance – Breakdown, Preventive, Predictive. TPM: Concept & Origin, Outline of TPM
– 8 Pillars, TPM Performance Measures – PQCDSM & OEE, Introduction to Autonomous
Maintenance (Jishu Hozen) activities, Small-Group activities of TPM. Introduction to 5S:
Steps in 5S Methodology, Concept of 1S(Seiri), 2S(Seiton), 3S (Seiso), 4S (Shiketsu), 5S,
(Shitsuke). Implementation of 1S & 2S, MBNQA, EFQM Award, RBNQA Award, JIPM
TPM Award, Losses & Abnormalities in TPM.
Unit 5: Business Process Reengineering (7 Hours)
BPR Concepts, Practices & Philosophy, Key features and guiding principles of
Reengineering, Changes required on Behavioral Side in a BPR Project, Concepts of Business
and Core Processes in BPR, Process Mapping, SIPOC, BOLO (Be On Look Out)
Methodology , Tools in BPR
Unit 6: Theory of Constraints (7 Hours)
Introduction to TOC, Concept, Constraints – Types, Concept of Throughput, Inventory &
Operating Expenses, Throughput Accounting, TOC Methodology, Numerical & Cases in
TOC. Application of TOC in industry , Drum-Buffer-Rope Approach, Numerical & Case in
TOC Applications.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 36)
List of Practical: (Minimum Five )
Assignments on the following:
1. Case – Design of JIT / Kanban System
2. Case – Cellular Manufacturing
3. Case – Setup Time Reduction (SMED Philosophy)
4. Exercise – Design of Single Piece Flow
5. Assignment on TPM Performance Measures & OEE
6. Case on BPR
7. Case Study & Numerical on Application of TOC
Projects: Minimum Two
Project-1: Based on identification of 3M, Kaizen and Value Stream Mapping
Project-2: Based on any one or many Lean Tools and Techniques
Project-3: Based on Total Productive Maintenance
Project-4: Based on Theory of Constraints or Process Reengineering
Text Books: 1. Richard Chase, Nicholas Aquilano, Nitin Agarwal, F. Robert Jacobs; Operations
Management for Competitive Advantage; 11/e; TATA McGRAW HILL Publication.
2. Mooref; Making Common Sense Common Practice
Reference Books:
1. Narayanan; Managing Technology & Innovation for Competitive Advantage
2. M.G.Korgaonkar ; Just In Time Manufacturing
3. B.S.Sahay ; World Class Manufacturing
4. Schonberger ; World Class Manufacturing
Course Outcomes:
The student will be able to –
1. Identify, eliminate and reduce the non-value added activities (wastes) in manufacturing
organization.
2. Apply the tools and techniques of lean manufacturing to improve productivity in
manufacturing and service organizations.
3. Understand the concept, tools and techniques in TPM philosophy.
4. Analyze, map and improve business processes for achieving improvements.
5. Apply the tools and techniques of constraint management to improve productivity in
manufacturing and service organizations.
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 37)
FF No. : 654
IP483TH::Industrial Robotics
Credits: 3 Teaching Scheme: 3. Hours / Week
Unit 1: Basic Concepts in Robotics (…8.. Hours)
Automation and robotics, robot anatomy, robot specifications, Development of industrial
Robots and manipulators, basic structure of robots, resolution, accuracy and repeatability.
Classification, Configuration of robots, arm and body motions, wrist motions,
Mechanical, hydraulic and pneumatic Manipulators
Unit 2: Robot Arm Kinematics (….7 Hours)
The direct kinematics problem, the inverse kinematic solution, Homogeneous
transformations, Denavit - Hartenberg's representations, Global & Local Coordinates for
analysis
Unit 3: Static and dynamic analysis of manipulator arm (….7. Hours) Statics of planer arm robot, Mass and inertia of links, Lagrangian formulation for equations
of motion for serial manipulators
Unit 4: Robot Grippers (….6. Hours) Classification, types, Design consideration, Materials for hostile operation. Cylindrical
Cam type; Grippers using pneumatic, , Vacuum Grippers, ultrasonic grippers
Unit 5: Sensors in Robotics (….6. Hours) Sensors - functioning, types, analysis and fields of applications – position, velocity and
acceleration sensors, Tactile sensors, temperature sensors, Variable Pressure Light
Converting Sensor, High Resolution Compliance, Range & Proximity Sensors, Electro-
optical Sensors. Pneumatic tactile Sensor, Slip type Sensors
Vision system: Median filtering, thresholding, discretization, Smoothening of binary image.
Recognition Procedure. CCD Camera.
Unit 6: Robot Drives, Control and Robot Programming (….6. Hours) DC servo motors, basic control systems concepts and models, control system analysis,
robot activation and feed back components. Positional and velocity actuators. Methods of
Programming the robot, Languages, Robographics, Introduction to Artificial Intelligence,
Hydraulic systems, Power transmission systems, robot joint control design.
List of Practicals:
1 problems on accuracy, precision and repeatability, resolution
2 problem on forward kinematics-Cartesion
3 problem on forward kinematics-cylindrical
4 problem on forward kinematics-polar
5 problem on forward kinematics-jointed arm.
.
And
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 38)
List of Project areas: (For THP, TLP courses) 1. Project 1-Algorithm for pick and place operation
2. Project 2- Programme for pick and place opration.
Text Books:
1. Deb S.R., Robotics, Tata McGraw Hill Publications, New Delhi.
2. Yoram Koren, Robotics for Engineers, McGraw Hill Book Co.
3. Groover M.P., Weiss M., Nagel R.N., Odrey N.G., Industrial Robotics Technology -
Programming and Applications, McGraw Hill Book Co.
4. Fu K.S., Gonzalex R.C., Lee C.S.G., Robotics Control Sensing, Vision and
intelligence, McGraw Hill Book Co
Reference Books: 1. Hartenberg and Denavit, Kinematics and Synthesis of Linkages, McGraw Hill Book
Co.
2. Hall A.S.,Kinematics and Linkage Design, Prentice Hall.
3. Hirchhorn J., Kinematics and Dynamics of Machinery, McGraw Hill Book Co.
4. Todd D.J., Fundamentals of Robot Technology, Wiley Publications
5. Paul R., Robots - Manipulators, Mathematics, Programming and Control, MIT Press.
6. Janakiraman P.A., Robotics and Image Processing, Tata McGraw Hill 1995.
Course Outcomes:
The student will be able to – 1. Understand robot system and Select type of robot for industrial applications
2. Solve direct and inverse kinematic problem for Cartesian, polar, cylindrical and articulated
arm robot.
3.Understand concept of static and dynamics of manipulator arm
4.Understand various types of end effectors used in industrial robots.
5. Understand concepts and applications of sensors used in industrial robots.
6. Study and Select appropriate drives and robot programming for industrial robots
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 39)
FF No. : 654
IP408PRJ :: PROJECT
Credits: 05 Teaching Scheme: - Practical 2 Hr/Week
The project work could be of the following nature:
19. Manufacturing /Fabrication of a prototype machine' including selection, concept,
design, material, manufacturing the components, assembly of components, testing and
performance evaluation.
20. Improvement of existing machine / equipment / process.
21. Design and fabrication of Jigs and Fixtures, dies, tools, special purpose equipment,
inspection gauges, measuring instruments for machine tools.
22. Computer aided design, analysis of components such as stress analysis.
23. Problems related to Productivity improvements.
24. Problems related to value engineering.
25. Problems relating to material handling system.
26. Energy Audit of organization, Industrial evaluation of machine devices.
27. Design of a test rig for performance evaluation of machine devices.
28. Product design and development.
29. Analysis, evaluation and experimental verification of any engineering problem
encountered.
30. Quality systems and management. Total Quality Management.
31. Quality improvements, In-process Inspection, Online gauging.
32. Low cost automation, Computer Aided Automation in Manufacturing.
33. Time and Motion study, Job evaluation.
34. Ergonomics and safety aspects under industrial environment
35. Management Information System.
36. Market Analysis in conjunction with Production Planning and Control.
OR
Fabrication of models, machines, prototypes based on new ideas, robots and machine
based on hitech systems and automation, experimental set-up, fabrication of testing
equipment, renovation of machines, etc. Computer based design / analysis or modeling /
simulation of product(s), mechanism(s) or system (s) and its validation or comparison
with available benchmarks / results. Modelling/simulation of product(s), mechanism(s) or
system(s) and its validation or comparison with available bench marks / results.
Design/development and Fabrication of models, machines, and prototypes based on new
ideas, robotic and automation systems, Experimental set ups, test rigs/ equipments.
The project work shall be taken up individually or in a group consisting of not more than 4
students.
A report containing maximum 30 pages shall be submitted based on the background, need
and scope of the project, project specifications, activities involved in the project and
activity plan, study of literature and basic theory, and work completed (if any).
Guidelines:
Vishwakarma Institute of Technology Issue 01 : Rev No. 1 : Dt. 24/03/17
Structure and syllabus of Final Year B. Tech. Production Engineering. Pattern A14 Revised, A.Y. 2017-18 (P a g e | 40)
• Report shall be typed or printed.
• Figures and tables shall be on separate pages and attached at respective positions.
• Project title and approval sheets shall be attached at the beginning of the report
followed by index and synopsis of the project.
• References shall be mentioned at the end followed by appendices (if any).
• When a group of students is doing a project, names of all the students shall be
included on every certified report copy.
Each group of students shall submit two copies of reports to the institute and one copy
shall be prepared for each individual student.
Course Outcomes : Students will be able to:
7. Survey literature for problem identification
8. Cultivate the habit of working in a team, communicate effectively and attempt a
problem solution in a right approach
9. Correlate the theoretical and experimental/simulations results and draw the proper
inferences.
10. Apply engineering knowledge in carrying out project starting from design, drafting,
process planning, project management, costing, manufacturing, QC and inspection,
down to assembly, testing and evaluation.
11. To practice data collection and analysis using different measurement equipment’s and
software packages.
12. Prepare project report as per guideline and present it effectively