axial expansion joints¤tter... · 2016-06-14 · expansion joints and bellows for torsion torsion...
TRANSCRIPT
93
AX
B022016-1 – Subject to alterations and eventual misprints
AXIAL
EXPANSION JOINTS
95 Axial expansion joint types
96 Standard range design
WITH LOOSE FLANGES
AX1BU / ID no. 41
98 PN 2,5
102 PN 6
104 PN 10
106 PN 16
108 PN 25
WITH WELDED FLANGES
AX1FU / ID no. 42
110 PN 2,5
114 PN 6
116 PN 10
118 PN 16
120 PN 25
WITH WELDING ENDS
AX1SU / ID no. 43
122 PN 2,5
126 PN 6
128 PN 10
130 PN 16
132 PN 25
134 PN 40
95
AX
B022016-1 – Subject to alterations and eventual misprints
AXIAL
EXPANSION JOINT TYPES
Axial with loose langes
AX1BU / ID no. 41
DN 25 - 2200
PN 2,5 - 25
Axial with welding ends
AX1SU / ID no. 43
DN 25 - 2200
PN 2,5 - 40
AXIAL MOVEMENT MORE INFORMATION
Please refer to WebLink 13101 to:
l See how the axial expansion joints
absorb movement
l See accessories (e.g. inner sleeves)
l See tables
l See installation instruction
l Access online inquiry/order form
l Download BelMaker Light®
Easy access via this QR code:
Axial with welded langes
AX1FU / ID no. 42
DN 25 - 2200
PN 2,5 - 25
96 97
AX
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
Design condition
l Design code: EN 14917
l Designed at 20°C for minimum
1000 thermal load cycles
l Arranged according nominal
pressure [PN]
l PN corresponds to the allowable
operating pressure at room
temperature [Rpt]
l Operating temperature from
-10°C to +400°C based on the
reduction factor (Kpa) from the
table on the next page
l All expansion joints are designed
to be tested at a pressure 1,43 x
the design pressure.
Where a higher test pressure is
required a unit with a higher
nominal pressure (PN) should be
selected to achieve this
Movements
Movements are considered alternatives.
The total accumulated coeicient of
utilisation cannot exceed 1.
A 100% AX utilisation allows no lateral
movements.
Bellow
Multiply bellow in double certiied
material.
Material: EN 1.4541/AISI 321 or
EN 1.4571/AISI 316 Ti
Tolerances: according to
EN ISO 13920 Class C.
Connection ends
Flanges
Loose langes, welded langes.
Drilling according to EN 1092.
Material: 1.0460 (C 22.8) or
1.0425 P265 GH (HII)
Surface treatment: primer coated.
Stainless steel langes are
available on request.
Tolerances: according to norms and
standards that applies.
Welding ends
Material:
≤ DN 500: EN 1.0345/P235 GH (HI)
> DN 500: EN 1.0425/P265 GH (HII)
Surface treatment: primer coated.
Stainless steel welding ends are
available on request.
Tolerances: according to norms and
standards that applies.
STANDARD RANGE
DESIGN
We are specialised in designing and
manufacturing of customised
solutions. See selected examples
here: WebLink 13601
If the required/speciied expansion
joint is not found in this product
catalogue, please do not hesitate to
forward your speciications to us.
CUSTOMISED
SOLUTIONS
Accessories
Inner sleeve, cover, counter lange,
gaskets, insulation etc. are available
on request.
Certificates
Material certiicate 3.1 according to
EN 10204 and/or ASME.
PLEASE NOTE!
Vibrations
There are many ways to absorb
vibration. To know more about it,
please contact us.
Misalignment
We strongly advise against the use of
expansion joints and bellows for
misalignment.
Torsion
Torsion on bellow parts are not
desirable and should be set to zero (0).
If this cannot be avoided, please
contact us.
TEMPERATURE°C
REDUCTION FACTORKpa
20 1,00
100 0,83
150 0,78
200 0,74
250 0,71
300 0,67
350 0,64
400 0,62
Pressure reduction factor
The factor used for reduction of
pressure [Kpa], is based on the bellow
material yield strength at design
temperature [Rp], and the yield
strength at room temperature [Rpt].
Deiniton: Kpa = Rp / Rpt
The reduction factor is applied to
modify the design pressure [PS] where
temperatures exceed 20°C, it com-
pensates for the decay in material
mechanical properties at elevated
temperatures. The modiied pressure
must always be lower than the nominal
pressure of the standard item.
Calculation: PS / Kpa ≤ PN
Where the applied design pressure
is lower than the nominal pressure
for the standard unit an increase in
fatigue life expectancy and / or
increased movements can be
achieved.
Please refer to Belmaker Light®
to get an optimised solution.
On request
Please contact us, if you have any
special requirements for
eg. temperature down to -60°C,
a special combination of ends etc.
98 99
AX
Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41 PN 2,5 - with f lange dr i l l ing according to EN 1092-1
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
Ef. cross-section
Acm2
Ef. cross-section
Acm2
BELLOW BELLOW
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
Weblink: 13102
* OFD= Outside face diameter
OFD *
d1mm
OFD *
d1mm
information about: Primer, connection
ends, inner sleeve, cover etc.
To be continued...
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
DN
Nominal diameter
50 23 14 44 155 41.057.10 16 90 69 27,9 88 60 0,3 3,3
50 38 39 50 220 41.057.20 16 90 69 27,9 54 14 0,4 3,4
65 27 12 40 145 41.058.10 16 107 87 46,0 82 108 0,4 4,1
65 43 30 50 200 41.058.20 16 107 87 46,0 52 27 0,6 4,3
65 57 53 50 250 41.058.30 16 107 87 46,0 39 12 0,7 4,4
80 26 6 29 150 41.059.10 18 122 114 79,4 109 401 0,6 6,4
80 43 17 49 195 41.059.20 18 122 114 79,4 66 80 0,8 6,6
80 65 39 50 250 41.059.30 18 122 114 79,4 44 24 1,1 6,7
100 37 7 32 155 41.060.10 18 147 145 131 95 507 0,8 7,2
100 53 15 47 190 41.060.20 18 147 144 130 64 138 1,1 7,4
100 92 46 50 265 41.060.30 18 147 144 129 59 40 1,7 8,4
125 38 6 28 160 41.061.10 20 178 171 188 93 831 1,2 9,5
125 65 18 48 215 41.061.20 20 178 171 187 85 197 1,8 10,5
125 97 50 50 305 41.061.30 20 178 172 186 71 63 3,1 12,2
150 41 5 25 180 41.062.10 20 202 204 271 113 980 2 10,5
150 83 24 50 250 41.062.20 20 202 204 271 57 112 3,1 11,1
150 123 73 50 400 41.062.30 20 202 203 266 70 46 6 14,5
200 57 7 27 185 41.064.10 22 258 257 442 87 879 3,4 15,4
200 100 25 48 260 41.064.20 22 258 256 440 48 137 5,4 16,2
200 114 37 50 310 41.064.30 22 258 259 444 54 109 7,1 17,6
250 50 5 19 190 41.065.10 24 312 309 663 92 1860 5,3 19,8
250 109 28 42 310 41.065.20 24 312 314 673 56 207 11 22,5
250 149 56 50 405 41.065.30 24 312 313 667 64 117 15 28,0
300 63 6 21 205 41.066.10 24 365 365 927 124 3000 8 27,4
300 118 18 39 255 41.066.20 24 365 370 943 46 330 11 27,4
300 159 53 50 420 41.066.30 24 365 365 923 61 150 22 35,9
350 54 3 16 175 41.067.10 26 410 404 1132 87 4010 7,6 36,3
350 117 16 35 250 41.067.20 26 410 402 1126 45 426 13 37,7
350 167 48 50 405 41.067.30 26 410 400 1113 60 191 25 46,9
400 78 7 20 230 41.068.10 28 465 461 1478 107 2680 15 44,7
400 130 20 34 305 41.068.20 28 465 461 1478 65 525 22 46,7
400 183 45 48 410 41.068.30 28 465 457 1459 70 264 32 54,9
450 74 6 17 235 41.069.10 30 520 511 1842 110 3750 19 54,7
450 124 17 29 305 41.069.20 30 520 511 1842 66 795 26 57,0
450 191 42 45 415 41.069.30 30 520 510 1832 68 325 40 66,2
500 82 6 17 255 41.070.10 30 570 566 2263 131 4290 26 59,1
500 140 20 29 355 41.070.20 30 570 564 2254 75 721 39 61,6
500 211 46 45 465 41.070.30 30 570 564 2248 79 333 56 71,7
600 75 5 13 295 41.072.10 32 670 679 3257 214 10600 44 79,0
600 132 15 23 385 41.072.20 32 670 679 3257 123 1870 56 82,8
600 207 38 36 505 41.072.30 32 670 679 3257 78 468 82 88,6
700 73 4 11 255 41.074.10 24 775 777 4335 221 17300 58 73,3
700 131 13 20 345 41.074.20 24 775 778 4341 124 2880 74 77,7
700 220 35 33 485 41.074.30 24 775 781 4358 76 639 109 84,4
800 62 2 8 250 41.076.10 37 880 886 5654 268 52400 78 132
800 124 9 16 340 41.076.20 37 880 886 5654 134 5380 86 137
800 219 31 29 490 41.076.30 37 880 884 5640 76 891 140 144
900 63 2 7 270 41.078.10 37 980 990 7110 265 67800 98 146
900 126 8 15 360 41.078.20 37 980 990 7110 133 6990 108 151
900 211 24 25 480 41.078.30 37 980 990 7110 80 1440 162 160
1000 66 2 7 280 41.080.10 42 1080 1096 8749 255 81500 120 177
1000 115 5 12 340 41.080.20 42 1080 1098 8765 149 13700 121 183
1000 211 22 22 490 41.080.30 42 1080 1093 8724 80 1870 199 193
1200 80 2 7 210 41.082.10 42 1280 1264 11794 215 50600 159 205
1200 136 8 12 300 41.082.20 42 1280 1264 11813 128 9570 203 213
1200 211 22 19 450 41.082.30 42 1280 1259 11765 84 2200 321 224
100 101
AX Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41 PN 2,5 - with f lange dr i l l ing according to EN 1092-1
MOVEMENT LENGTH ID no. WEIGHT
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
kg
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
Weblink: 13102
* OFD= Outside face diameter
OFD *
d1mm
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Lo
c
d1
Do
DN
Nominal diameter
MOVEMENT LENGTH ID no.
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
OFD *
d1mm
information about: Primer, connection
ends, inner sleeve, cover etc.
This page is
intentionally
left blank
DN
Nominal diameter
WEIGHT
kg
1400 62 1 4 225 41.084.10 42 1466 1466 15980 295 179900 234 233
1400 96 3 7 240 41.084.20 42 1466 1464 15980 194 42100 230 237
1400 179 12 14 360 41.084.30 42 1466 1464 15958 103 6340 336 251
1600 59 1 4 190 41.086.10 47 1666 1664 20750 336 300600 308 324
1600 95 3 6 250 41.086.20 47 1666 1664 20776 212 61800 303 330
1600 178 10 12 370 41.086.30 47 1666 1664 20750 112 9350 439 344
1800 56 1 3 200 41.088.10 52 1866 1864 26142 386 442300 402 399
1800 94 2 5 260 41.088.20 52 1866 1864 26199 231 86800 387 406
1800 170 9 10 380 41.088.30 52 1866 1864 26142 128 14300 557 422
2000 53 0 3 200 41.090.10 52 2066 2061 32204 454 653200 519 441
2000 88 2 4 260 41.090.20 52 2066 2061 32204 273 129800 491 447
2000 159 7 9 380 41.090.30 52 2066 2061 32204 152 21700 693 466
2200 65 0 3 215 41.092.10 57 2266 2260 38865 424 646600 670 575
2200 109 2 5 275 41.092.20 57 2266 2260 38865 254 133500 610 586
2200 197 8 10 395 41.092.30 57 2266 2260 38865 141 22600 847 609
102 103
AX Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41
PN 6 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13102
* OFD= Outside face diameter Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
MOVEMENT LENGTH ID no. WEIGHT
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
kg
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
DN
Nominal diameter
MOVEMENT LENGTH ID no.
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
DN
Nominal diameter
WEIGHT
kg
50 23 14 44 155 41.107.10 16 90 69 27,9 88 60 0,6 3,3
50 40 48 50 255 41.107.20 16 90 69 27,9 79 15 1,1 3,8
65 26 11 38 145 41.108.10 16 107 87 46,0 84 108 0,9 4,1
65 43 32 50 210 41.108.20 16 107 87 46,0 81 39 1,4 4,5
80 25 6 28 150 41.109.10 18 122 114 79,4 110 401 1,1 6,4
80 42 17 47 195 41.109.20 18 122 114 79,4 66 80 1,7 6,6
80 59 37 50 260 41.109.30 18 122 114 77,3 100 52 2,5 7,5
100 35 6 31 155 41.110.10 18 147 145 131 94 507 1,7 7,2
100 53 15 47 200 41.110.20 18 147 144 129 98 179 2,6 7,8
100 76 42 50 280 41.110.30 18 147 145 127 118 82 4,4 9,8
125 35 5 25 160 41.111.10 20 178 171 188 92 831 2,4 9,5
125 62 17 46 215 41.111.20 20 178 171 187 85 197 4 10,5
125 82 43 50 310 41.111.30 20 178 170 182 111 103 7,2 13,4
150 38 5 23 180 41.112.10 20 202 204 271 112 980 4,1 10,5
150 65 20 40 255 41.112.20 20 202 204 267 131 306 7,7 12,6
150 103 53 50 364 41.112.30 20 202 204 262 152 126 13 16,7
200 51 6 24 185 41.114.10 22 258 257 442 86 879 7,4 15,4
200 88 23 42 275 41.114.20 22 258 259 441 106 311 14 18,6
200 110 38 50 330 41.114.30 22 258 259 435 154 265 18 23,1
250 46 5 18 190 41.115.10 24 312 309 663 94 1860 12 19,8
250 86 18 33 280 41.115.20 24 312 314 670 109 556 22 23,8
250 111 37 44 375 41.115.30 24 312 310 656 117 283 32 28,6
300 58 5 19 205 41.116.10 24 365 365 927 127 3000 17 27,4
300 84 12 28 240 41.116.20 24 365 364 924 87 877 24 28,3
300 115 24 38 305 41.116.30 24 365 370 933 121 629 34 34,9
350 55 4 16 200 41.117.10 26 410 396 1104 131 3900 21 37,6
350 89 11 27 245 41.117.20 26 410 398 1110 83 986 28 39,6
350 123 27 37 340 41.117.30 26 410 400 1108 112 582 46 47,8
400 65 7 17 250 41.118.10 28 465 453 1451 114 2380 36 44,7
400 117 19 31 315 41.118.20 28 465 458 1462 105 846 52 50,2
400 147 42 39 460 41.118.30 28 465 455 1441 145 505 87 64,9
450 54 4 12 235 41.119.10 30 520 510 1836 179 7320 41 56,2
450 90 11 21 290 41.119.20 30 520 514 1851 107 1770 56 59,0
450 157 34 37 420 41.119.30 30 520 513 1830 140 742 96 77,5
500 61 5 13 260 41.120.10 30 570 568 2273 196 7270 57 60,7
500 108 16 23 360 41.120.20 30 570 567 2269 112 1210 93 63,8
500 171 36 36 460 41.120.30 30 570 569 2259 161 819 130 84,4
600 63 5 11 305 41.122.10 32 670 666 3191 237 8930 98 79,0
600 131 16 23 375 41.122.20 32 670 681 3256 185 2420 134 89,3
600 189 34 33 480 41.122.30 32 670 679 3235 180 1120 190 108
700 57 4 8 325 41.124.10 40 775 762 4248 279 14500 135 115
700 121 12 18 390 41.124.20 40 775 776 4316 201 4200 178 127
700 195 33 30 530 41.124.30 40 775 775 4298 175 1390 277 148
800 68 3 9 305 41.126.10 44 880 878 5586 364 34500 163 160
800 119 11 16 400 41.126.20 44 880 878 5586 208 5920 233 168
800 208 28 28 500 41.126.30 44 880 885 5618 171 2020 324 192
900 65 3 7 310 41.128.10 48 980 979 7011 390 50800 205 192
900 116 9 14 405 41.128.20 48 980 980 7019 218 8460 289 200
900 199 24 24 510 41.128.30 48 980 986 7047 178 2860 410 227
1000 62 2 6 320 41.130.10 52 1080 1080 8599 424 67600 258 223
1000 109 8 11 415 41.130.20 52 1080 1080 8599 242 12000 360 233
1000 211 23 23 535 41.130.30 52 1080 1092 8679 171 3390 499 263
1200 66 3 6 285 41.132.10 60 1295 1248 11652 452 68000 397 351
1200 114 8 10 380 41.132.20 60 1295 1251 11681 254 14200 550 362
1200 214 22 20 480 41.132.30 60 1295 1263 11781 175 4320 749 399
104 105
AX Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41
PN 10 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13102
* OFD= Outside face diameter Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
MOVEMENT LENGTH ID no. WEIGHT
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
kg
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
DN
Nominal diameter
MOVEMENT LENGTH ID no.
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 115 41.154.10 16 68 40 9,2 96 45 0,3 2,4
32 15 8 41 110 41.155.10 18 78 50 13,6 89 68 0,3 4,0
40 19 16 46 155 41.156.10 18 88 55 17,0 102 39 0,6 4,5
50 18 9 34 145 41.157.10 20 92 69 27,9 110 110 0,8 5,8
50 31 28 50 210 41.157.20 20 92 69 27,9 105 35 1,3 6,2
65 25 11 37 150 41.158.10 20 107 87 46,0 85 115 1,3 6,7
65 35 24 50 210 41.158.20 20 107 86 45,4 99 53 2,1 7,1
80 23 5 26 155 41.159.10 20 122 114 79,4 111 401 1,7 7,7
80 33 11 37 180 41.159.20 20 122 114 78,4 128 240 2,3 8,0
80 46 29 50 265 41.159.30 20 122 113 76,7 127 83 4,1 8,8
100 30 5 26 155 41.160.10 22 147 144 130 95 539 2,7 9,5
100 43 13 39 195 41.160.20 22 147 141 126 107 248 4 10,1
100 57 32 50 295 41.160.30 22 147 140 122 152 123 7,3 12,1
125 30 4 22 155 41.161.10 22 178 170 187 96 886 3,8 11,7
125 45 11 33 195 41.161.20 22 178 168 183 105 378 5,7 12,3
125 63 27 47 280 41.161.30 22 178 169 181 144 193 10 14,9
150 28 3 17 165 41.162.10 24 208 203 268 220 3380 5,8 15,7
150 61 17 37 250 41.162.20 24 208 206 270 139 351 12 17,4
150 71 33 45 345 41.162.30 24 208 198 256 172 213 19 19,2
200 35 4 17 185 41.164.10 24 258 257 437 251 4150 12 21,3
200 67 13 32 230 41.164.20 24 258 262 446 139 703 18 22,5
200 91 26 44 300 41.164.30 24 258 259 435 185 440 25 26,5
250 35 3 13 190 41.165.10 26 320 313 667 258 6760 19 27,6
250 65 10 25 235 41.165.20 26 320 317 677 142 1280 26 28,6
250 95 24 37 325 41.165.30 26 320 313 659 180 621 42 35,3
300 39 3 12 185 41.166.10 26 370 368 932 238 9460 25 32,0
300 91 16 30 275 41.166.20 26 370 370 933 150 1100 47 36,7
300 115 28 38 350 41.166.30 26 370 373 930 200 805 65 47,2
350 37 2 11 195 41.167.10 30 410 399 1110 257 12800 30 49,0
350 82 10 24 250 41.167.20 30 410 407 1129 171 2240 45 54,2
350 106 21 32 330 41.167.30 30 410 400 1103 170 1030 69 59,0
400 47 3 12 210 41.168.10 32 465 459 1459 357 19200 44 63,0
400 93 15 24 330 41.168.20 32 465 459 1461 159 1410 88 68,1
400 123 27 32 400 41.168.30 32 465 458 1443 228 1160 115 80,1
450 66 6 15 260 41.169.10 36 520 508 1818 255 7310 72 78,4
450 101 14 23 330 41.169.20 36 520 515 1838 215 2530 106 86,8
450 143 34 34 465 41.169.30 36 520 515 1822 247 1170 173 110
500 39 2 8 235 41.170.10 38 570 562 2236 531 49400 80 90,5
500 96 10 20 320 41.170.20 38 570 568 2254 296 4780 117 99,3
500 141 26 30 435 41.170.30 38 570 569 2249 251 1670 186 112
600 42 2 7 265 41.172.10 37 670 660 3147 663 58900 135 108
600 106 11 19 365 41.172.20 37 670 669 3183 327 5710 197 119
600 175 37 31 550 41.172.30 37 670 678 3208 295 1580 362 153
700 62 3 9 310 41.174.10 42 780 772 4280 536 33900 207 160
700 109 12 16 405 41.174.20 42 780 772 4280 306 6150 302 169
700 183 30 28 525 41.174.30 42 780 784 4327 294 2430 444 205
106 107
AX Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41
PN 16 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13102
* OFD= Outside face diameter Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
MOVEMENT LENGTH ID no. WEIGHT
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
kg
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
DN
Nominal diameter
MOVEMENT LENGTH ID no.
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 115 41.204.10 16 68 40 9,2 97 45 0,4 2,4
32 15 8 41 110 41.205.10 18 78 50 13,6 89 68 0,5 4,0
40 18 16 44 165 41.206.10 18 88 55 17,0 174 56 1,1 4,6
50 18 9 34 145 41.207.10 20 92 69 27,9 111 110 1,2 5,8
50 28 27 50 220 41.207.20 20 92 68 27,1 173 53 2,1 6,4
65 20 8 30 145 41.208.10 20 107 86 45,4 107 171 1,9 6,7
65 37 27 50 215 41.208.20 20 107 87 45,3 176 87 3,4 7,7
80 21 5 24 155 41.209.10 20 122 113 78,6 119 440 2,7 7,7
80 40 21 47 235 41.209.20 20 122 112 74,9 190 161 5,2 8,8
100 29 5 26 160 41.210.10 22 147 143 128 152 775 4,4 9,8
100 43 14 39 210 41.210.20 22 147 141 123 190 354 6,8 10,9
125 19 2 14 150 41.211.10 22 178 170 186 198 2810 5,6 11,8
125 40 9 29 190 41.211.20 22 178 173 187 163 684 8,8 12,9
125 50 15 37 225 41.211.30 22 178 172 184 183 431 12 14,2
150 24 3 14 170 41.212.10 24 208 205 269 330 4890 9,6 16,2
150 40 7 24 200 41.212.20 24 208 208 273 202 1140 13 16,8
150 63 19 39 265 41.212.30 24 208 206 265 247 526 20 19,4
200 32 3 15 180 41.214.10 26 258 261 442 393 8190 17 21,7
200 60 12 29 245 41.214.20 26 258 259 438 206 1010 29 23,4
200 75 25 36 340 41.214.30 26 258 257 427 278 597 46 29,7
250 34 4 13 220 41.215.10 29 320 309 658 269 5220 32 30,4
250 59 9 23 260 41.215.20 29 320 314 666 218 1820 43 33,1
250 80 24 31 360 41.215.30 29 320 312 652 282 895 74 41,0
300 28 1 9 200 41.216.10 32 375 365 919 469 26000 36 40,6
300 63 8 21 255 41.216.20 32 375 370 928 282 3840 55 44,9
300 89 20 29 345 41.216.30 32 375 369 920 259 1270 96 55,0
350 34 2 10 215 41.217.10 35 410 396 1096 406 16500 50 59,9
350 60 7 18 250 41.217.20 35 410 401 1106 299 5330 66 63,8
350 90 19 27 350 41.217.30 35 410 402 1103 262 1580 114 74,9
400 45 4 12 250 41.218.10 38 465 458 1451 464 15100 81 80,2
400 71 10 18 315 41.218.20 38 465 457 1447 297 3670 119 82,7
400 97 16 25 345 41.218.30 38 465 462 1457 288 2300 139 89,5
450 42 3 10 260 41.219.10 42 520 507 1808 525 22800 103 102
450 68 8 16 320 41.219.20 42 520 507 1808 326 5530 147 105
450 95 14 22 355 41.219.30 42 520 513 1822 300 3120 175 113
500 49 4 10 310 41.220.10 46 570 559 2217 562 18400 158 138
500 68 8 14 365 41.220.20 46 570 559 2217 404 6450 209 142
500 103 15 22 400 41.220.30 46 570 568 2245 337 3310 243 150
108 109
AX Lo
c
d1
Do
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH LOOSE FLANGES
AX1BU / ID no. 41
PN 25 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13102
* OFD= Outside face diameter Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
MOVEMENT LENGTH ID no. WEIGHT
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
kg
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
Please refer to WebLink 13102 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
DN
Nominal diameter
MOVEMENT LENGTH ID no.
AX
2δNmm
AN
2αNdeg.
LA
2λNmm
Built-inlength
Lomm
AX
CδN/mm
LA
CλN/mm
ADJUSTING FORCES
AN
CαNm/deg.
FLANGE
Thickness c
mm
Outside diameter
Domm
Ef. cross-section
Acm2
BELLOW
OFD *
d1mm
This page is
intentionally
left blank
DN
Nominal diameter
WEIGHT
kg
50 15 6 28 135 41.257.10 20 92 69 27,9 130 157 1,7 5,2
50 22 17 43 190 41.257.20 20 92 68 27,1 222 99 2,7 5,6
65 16 6 24 140 41.258.10 22 107 85 43,6 150 268 2,6 6,7
65 29 24 45 235 41.258.20 22 107 84 42,4 270 112 5,4 7,7
80 20 5 23 165 41.259.10 24 122 113 77,6 191 655 4,2 8,7
80 31 13 36 215 41.259.20 24 122 112 74,9 241 305 6,6 9,6
100 23 4 20 165 41.260.10 26 147 142 126 266 1650 6,3 12,5
100 36 12 33 220 41.260.20 26 147 138 120 230 460 11 13,3
125 28 5 21 190 41.261.10 28 178 170 184 223 1300 12 17,3
125 43 12 32 235 41.261.20 28 178 171 181 279 703 17 19,4
150 25 3 15 195 41.262.10 30 208 206 268 452 6060 15 21,9
150 47 13 29 265 41.262.20 30 208 203 261 321 873 29 24,3
200 27 2 13 195 41.264.10 32 258 257 431 585 12300 26 31,3
200 51 9 24 250 41.264.20 32 258 259 435 313 1690 41 33,6
200 60 17 29 315 41.264.30 32 258 257 427 352 1040 60 36,9
250 24 2 9 205 41.265.10 35 320 309 650 718 22500 42 43,8
250 46 7 18 255 41.265.20 35 320 311 655 372 3740 62 46,6
250 63 14 24 330 41.265.30 35 320 314 657 358 1670 92 50,7
300 30 2 10 225 41.266.10 38 375 360 901 622 19800 65 57,9
300 48 7 16 280 41.266.20 38 375 360 901 389 4410 97 59,9
300 65 11 21 305 41.266.30 38 375 370 922 358 2820 114 64,9
350 28 2 8 235 41.267.10 42 410 391 1076 702 25600 80 87,9
350 45 6 13 285 41.267.20 42 410 391 1076 438 6410 114 90,1
350 62 9 18 315 41.267.30 42 410 401 1100 392 3780 138 95,5
400 28 2 7 260 41.268.10 48 465 450 1416 1060 49400 115 123
400 46 5 12 300 41.268.20 48 465 452 1423 637 13400 148 126
400 82 15 21 400 41.268.30 48 465 459 1441 435 2940 245 140
110 111
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 2,5 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
To be continued...
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
50 23 14 44 145 42.057.10 16 69 27,9 88 63 0,3 3,3
50 38 39 50 215 42.057.20 16 69 27,9 54 14 0,4 3,4
65 27 12 40 135 42.058.10 16 87 46,0 82 115 0,4 4,0
65 43 32 50 205 42.058.20 16 87 46,0 80 37 0,6 4,5
80 26 6 29 130 42.059.10 18 114 79,4 109 386 0,6 6,4
80 43 17 49 170 42.059.20 18 114 79,4 66 86 0,7 6,6
80 65 39 50 230 42.059.30 18 114 79,4 44 24 1,1 6,7
100 37 7 32 135 42.060.10 18 145 131 95 507 0,8 7,2
100 53 15 47 170 42.060.20 18 144 130 64 138 1,1 7,3
100 92 46 50 245 42.060.30 18 144 129 59 39 1,7 8,4
125 38 6 28 140 42.061.10 20 171 188 93 790 1,2 9,5
125 65 18 48 190 42.061.20 20 171 187 85 211 1,8 10,1
125 97 50 50 285 42.061.30 20 172 186 71 62 3,1 12,2
150 41 5 25 155 42.062.10 20 204 271 113 1070 1,9 10,5
150 83 24 50 230 42.062.20 20 204 271 57 110 3,1 11,1
150 123 73 50 380 42.062.30 20 203 266 70 46 6,1 14,5
200 57 7 27 165 42.064.10 22 257 442 87 879 3,4 15,1
200 92 24 44 250 42.064.20 22 259 441 104 324 6 18,6
200 114 37 50 285 42.064.30 22 259 444 54 113 7 17,6
250 50 5 19 170 42.065.10 24 309 663 92 1780 5,3 19,8
250 109 28 42 290 42.065.20 24 314 673 56 205 11 22,5
250 149 56 50 380 42.065.30 24 313 667 64 118 15 28,0
300 63 6 21 185 42.066.10 24 365 927 124 2870 8,1 26,9
300 118 18 39 235 42.066.20 24 370 943 46 330 11 27,4
300 159 53 50 395 42.066.30 24 365 923 61 152 22 35,9
350 54 3 16 155 42.067.10 26 404 1132 87 4010 7,6 35,9
350 117 16 35 230 42.067.20 26 402 1126 45 415 13 37,7
350 167 48 50 385 42.067.30 26 400 1113 60 189 25 46,9
400 78 7 20 210 42.068.10 28 461 1478 107 2550 15 44,7
400 130 20 34 280 42.068.20 28 461 1478 65 551 21 46,7
400 183 45 48 390 42.068.30 28 457 1459 70 259 32 54,9
450 74 6 17 210 42.069.10 30 511 1842 110 4020 18 54,7
450 124 17 29 285 42.069.20 30 511 1842 66 795 26 57,0
450 191 42 45 390 42.069.30 30 510 1832 68 332 40 66,2
500 82 6 17 235 42.070.10 30 566 2263 131 4200 26 57,8
500 140 20 29 330 42.070.20 30 564 2254 75 734 38 61,6
500 211 46 45 440 42.070.30 30 564 2248 79 338 55 71,7
600 75 5 13 270 42.072.10 32 679 3257 214 11200 43 79,0
600 132 15 23 360 42.072.20 32 679 3257 123 1900 56 82,8
600 207 38 36 480 42.072.30 32 679 3257 78 477 82 88,6
700 73 4 11 235 42.074.10 24 777 4335 221 16700 59 71,1
700 131 13 20 325 42.074.20 24 778 4341 124 2830 75 75,5
700 220 35 33 465 42.074.30 24 781 4358 76 627 110 84,4
800 62 2 8 230 42.076.10 37 886 5654 268 50100 79 132
800 124 9 16 320 42.076.20 37 886 5654 134 5270 87 137
800 219 31 29 470 42.076.30 37 884 5640 76 882 141 144
900 63 2 7 250 42.078.10 37 990 7110 265 64900 99 146
900 126 8 15 340 42.078.20 37 990 7110 133 6840 109 149
900 211 24 25 460 42.078.30 37 990 7110 80 1420 163 160
1000 66 2 7 260 42.080.10 42 1096 8749 255 77700 121 177
1000 115 5 12 320 42.080.20 42 1098 8765 149 13400 122 183
1000 211 22 22 470 42.080.30 42 1093 8724 80 1850 200 193
1200 80 2 7 235 42.082.10 42 1264 11794 215 52800 157 205
1200 136 8 12 325 42.082.20 42 1264 11813 128 9570 203 213
1200 211 22 19 480 42.082.30 42 1259 11765 84 2160 323 224
112 113
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 2,5 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
This page is
intentionally
left blank
DN
Nominal diameter
WEIGHT
kg
1400 62 1 4 220 42.084.10 42 1466 15980 295 188200 232 233
1400 96 3 7 265 42.084.20 42 1464 15980 194 43000 229 237
1400 179 12 14 385 42.084.30 42 1464 15958 103 6410 335 251
1600 59 1 4 215 42.086.10 47 1664 20750 336 300600 308 324
1600 95 3 6 275 42.086.20 47 1664 20776 212 63000 301 329
1600 178 10 12 395 42.086.30 47 1664 20750 112 9450 437 344
1800 56 1 3 225 42.088.10 52 1864 26142 386 442300 402 396
1800 94 2 5 285 42.088.20 52 1864 26199 231 88500 385 404
1800 170 9 10 405 42.088.30 52 1864 26142 128 14400 554 422
2000 53 0 3 225 42.090.10 52 2061 32204 454 653200 519 441
2000 88 2 4 285 42.090.20 52 2061 32204 273 132200 488 447
2000 159 7 9 405 42.090.30 52 2061 32204 152 21900 690 466
2200 65 0 3 240 42.092.10 57 2260 38865 424 646600 670 572
2200 109 2 5 300 42.092.20 57 2260 38865 254 133500 610 584
2200 197 8 10 420 42.092.30 57 2260 38865 141 22600 847 609
114 115
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 6 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
400 65 7 17 230 42.118.10 28 453 1451 114 2330 36 44,7
400 117 19 31 290 42.118.20 28 458 1462 105 864 51 48,7
400 147 42 39 440 42.118.30 28 455 1441 145 496 88 64,9
450 54 4 12 215 42.119.10 30 510 1836 179 7000 42 56,2
450 90 11 21 270 42.119.20 30 514 1851 107 1720 57 57,6
450 157 34 37 395 42.119.30 30 513 1830 140 750 95 77,5
500 61 5 13 235 42.120.10 30 568 2273 196 7560 56 60,7
500 108 16 23 335 42.120.20 30 567 2269 112 1250 91 63,8
500 171 36 36 435 42.120.30 30 569 2259 161 819 130 84,4
600 63 5 11 285 42.122.10 32 666 3191 237 8800 98 79,0
600 131 16 23 350 42.122.20 32 681 3256 185 2460 133 89,3
600 189 34 33 455 42.122.30 32 679 3235 180 1140 188 99,9
700 57 4 8 270 42.124.10 24 762 4248 279 14500 135 71,1
700 121 12 18 335 42.124.20 24 776 4316 201 4200 178 85,3
700 195 33 30 475 42.124.30 24 775 4298 175 1390 277 107
800 68 3 9 265 42.126.10 37 878 5586 364 35700 161 134
800 119 11 16 360 42.126.20 37 878 5586 208 6120 230 142
800 208 28 28 465 42.126.30 37 885 5618 171 1980 327 169
900 65 3 7 265 42.128.10 37 979 7011 390 50800 205 149
900 116 9 14 360 42.128.20 37 980 7019 218 8460 289 157
900 199 24 24 465 42.128.30 37 986 7047 178 2840 411 188
1000 62 2 6 280 42.130.10 42 1080 8599 424 65400 261 185
1000 109 8 11 370 42.130.20 42 1080 8599 242 12200 358 194
1000 211 23 23 490 42.130.30 42 1092 8679 171 3390 499 224
1200 66 3 6 285 42.132.10 47 1248 11652 452 68000 397 281
1200 114 8 10 380 42.132.20 47 1251 11681 254 14000 554 293
1200 214 22 20 480 42.132.30 47 1263 11781 175 4320 749 329
50 23 14 44 145 42.107.10 16 69 27,9 88 63 0,6 3,3
50 41 49 50 245 42.107.20 16 69 27,9 78 15 1,1 3,7
65 26 11 38 135 42.108.10 16 87 46,0 84 115 0,8 4,0
65 43 32 50 205 42.108.20 16 87 46,0 81 37 1,4 4,5
80 25 6 28 130 42.109.10 18 114 79,4 110 386 1,1 6,4
80 42 17 47 170 42.109.20 18 114 79,4 66 86 1,6 6,6
80 59 37 50 235 42.109.30 18 114 77,3 100 53 2,4 7,5
100 35 6 31 135 42.110.10 18 145 131 94 507 1,7 7,2
100 53 15 47 175 42.110.20 18 144 129 98 191 2,5 7,8
100 76 42 50 260 42.110.30 18 145 127 118 79 4,5 9,8
125 35 5 25 140 42.111.10 20 171 188 92 790 2,4 9,5
125 62 17 46 190 42.111.20 20 171 187 85 211 3,9 10,1
125 82 43 50 290 42.111.30 20 170 182 111 101 7,2 12,7
150 38 5 23 155 42.112.10 20 204 271 112 1070 3,9 10,5
150 65 20 40 235 42.112.20 20 204 267 131 295 7,9 12,6
150 103 53 50 340 42.112.30 20 204 262 152 126 13 16,7
200 51 6 24 165 42.114.10 22 257 442 86 879 7,4 15,1
200 88 23 42 250 42.114.20 22 259 441 106 324 14 18,6
200 110 38 50 305 42.114.30 22 259 435 154 270 18 23,1
250 46 5 18 170 42.115.10 24 309 663 94 1780 12 19,8
250 86 18 33 255 42.115.20 24 314 670 109 579 21 23,8
250 111 37 44 350 42.115.30 24 310 656 117 288 32 28,6
300 58 5 19 185 42.116.10 24 365 927 127 2870 17 26,9
300 84 12 28 220 42.116.20 24 364 924 87 858 24 28,3
300 115 24 38 280 42.116.30 24 370 933 121 636 34 34,9
350 55 4 16 175 42.117.10 26 396 1104 131 4250 20 37,0
350 89 11 27 220 42.117.20 26 398 1110 83 1060 28 39,6
350 123 27 37 320 42.117.30 26 400 1108 112 570 46 45,9
116 117
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 10 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 120 42.154.10 16 40 9,2 96 41 0,3 2,3
32 15 8 41 110 42.155.10 18 50 13,6 89 68 0,3 3,8
40 19 16 46 160 42.156.10 18 55 17,0 102 39 0,6 4,4
50 18 9 34 135 42.157.10 20 69 27,9 110 116 0,8 5,8
50 31 28 50 205 42.157.20 20 69 27,9 105 34 1,3 6,2
65 25 11 37 145 42.158.10 20 87 46,0 85 112 1,4 6,6
65 36 25 50 200 42.158.20 20 86 45,4 98 54 2,1 7,0
80 23 5 26 130 42.159.10 20 114 79,4 111 431 1,7 7,6
80 33 11 37 160 42.159.20 20 114 78,4 128 231 2,3 8,0
80 46 29 50 240 42.159.30 20 113 76,7 127 86 4 8,8
100 30 5 26 135 42.160.10 22 144 130 95 490 2,8 9,5
100 43 13 39 175 42.160.20 22 141 126 107 239 4 10,1
100 57 32 50 270 42.160.30 22 140 122 152 125 7,2 11,6
125 30 4 22 135 42.161.10 22 170 187 96 806 4 11,7
125 45 11 33 175 42.161.20 22 168 183 105 364 5,8 12,1
125 63 27 47 255 42.161.30 22 169 181 144 197 9,9 14,2
150 28 3 17 145 42.162.10 24 203 268 220 3130 6 15,7
150 61 17 37 225 42.162.20 24 206 270 139 364 12 17,4
150 71 33 45 325 42.162.30 24 198 256 172 207 19 19,2
200 35 4 17 160 42.164.10 24 257 437 251 4320 12 20,9
200 67 13 32 210 42.164.20 24 262 446 139 673 18 22,5
200 91 26 44 275 42.164.30 24 259 435 185 440 25 26,5
250 35 3 13 165 42.165.10 26 313 667 258 7340 18 26,6
250 65 10 25 210 42.165.20 26 317 677 142 1340 26 28,6
250 95 24 37 300 42.165.30 26 313 659 180 632 42 35,3
300 39 3 12 165 42.166.10 26 368 932 238 9020 25 32,0
300 91 16 30 250 42.166.20 26 370 933 150 1130 46 36,7
300 115 28 38 325 42.166.30 26 373 930 200 805 65 47,2
350 37 2 11 175 42.167.10 30 399 1110 257 11700 31 49,0
350 82 10 24 225 42.167.20 30 407 1129 171 2240 45 52,4
350 106 21 32 305 42.167.30 30 400 1103 170 1030 69 59,0
400 47 3 12 190 42.168.10 32 459 1459 357 17600 46 63,0
400 93 15 24 305 42.168.20 32 459 1461 159 1440 87 68,1
400 123 27 32 375 42.168.30 32 458 1443 228 1160 115 80,1
450 66 6 15 235 42.169.10 36 508 1818 255 7610 70 78,4
450 101 14 23 305 42.169.20 36 515 1838 215 2590 105 86,8
450 143 34 34 440 42.169.30 36 515 1822 247 1160 174 110
500 39 2 8 210 42.170.10 38 562 2236 531 52900 78 90,5
500 96 10 20 295 42.170.20 38 568 2254 296 4960 115 99,3
500 141 26 30 410 42.170.30 38 569 2249 251 1670 186 112
600 42 2 7 240 42.172.10 37 660 3147 663 61900 133 105
600 106 11 19 340 42.172.20 37 669 3183 327 5710 197 115
600 175 37 31 525 42.172.30 37 678 3208 295 1570 364 153
700 62 3 9 285 42.174.10 42 772 4280 536 35000 205 160
700 109 12 16 380 42.174.20 42 772 4280 306 6240 300 169
700 183 30 28 495 42.174.30 42 784 4327 294 2470 440 205
118 119
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 16 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 120 42.204.10 16 40 9,2 97 41 0,4 2,3
32 15 8 41 110 42.205.10 18 50 13,6 89 68 0,5 3,8
40 18 16 44 170 42.206.10 18 55 17,0 174 56 1,1 4,5
50 18 9 34 135 42.207.10 20 69 27,9 111 116 1,2 5,8
50 28 27 50 215 42.207.20 20 68 27,1 173 51 2,2 6,4
65 20 8 30 135 42.208.10 20 86 45,4 107 182 1,9 6,7
65 37 27 50 210 42.208.20 20 87 45,3 176 85 3,4 7,4
80 21 5 24 130 42.209.10 20 113 78,6 119 472 2,6 7,7
80 40 21 47 210 42.209.20 20 112 74,9 190 165 5,1 8,8
100 29 5 26 140 42.210.10 22 143 128 152 712 4,5 9,6
100 43 14 39 190 42.210.20 22 141 123 190 331 7,1 10,6
125 19 2 14 125 42.211.10 22 170 186 198 3070 5,4 11,7
125 40 9 29 165 42.211.20 22 173 187 163 715 8,6 12,6
125 50 15 37 200 42.211.30 22 172 184 183 450 12 14,2
150 24 3 14 145 42.212.10 24 205 269 330 5290 9,4 15,8
150 40 7 24 180 42.212.20 24 208 273 202 1090 14 16,4
150 63 19 39 245 42.212.30 24 206 265 247 500 21 19,4
200 32 3 15 155 42.214.10 26 261 442 393 8190 17 21,7
200 60 12 29 220 42.214.20 26 259 438 206 1030 28 23,4
200 75 25 36 315 42.214.30 26 257 427 278 597 46 29,7
250 34 4 13 200 42.215.10 29 309 658 269 4860 33 29,7
250 59 9 23 235 42.215.20 29 314 666 218 1890 43 33,1
250 80 24 31 335 42.215.30 29 312 652 282 895 74 41,0
300 28 1 9 175 42.216.10 32 365 919 469 27100 36 40,6
300 63 8 21 230 42.216.20 32 370 928 282 3920 55 44,9
300 89 20 29 320 42.216.30 32 369 920 259 1270 96 55,0
350 34 2 10 190 42.217.10 35 396 1096 406 17200 49 59,9
350 60 7 18 230 42.217.20 35 401 1106 299 5000 67 63,8
350 90 19 27 325 42.217.30 35 402 1103 262 1580 114 74,9
400 45 4 12 225 42.218.10 38 458 1451 464 15700 80 80,2
400 71 10 18 290 42.218.20 38 457 1447 297 3670 119 82,7
400 97 16 25 320 42.218.30 38 462 1457 288 2300 139 89,5
450 42 3 10 235 42.219.10 42 507 1808 525 22800 103 102
450 68 8 16 300 42.219.20 42 507 1808 326 5230 151 102
450 95 14 22 330 42.219.30 42 513 1822 300 3120 175 109
500 49 4 10 285 42.220.10 46 559 2217 562 18400 158 138
500 68 8 14 340 42.220.20 46 559 2217 404 6550 207 142
500 103 15 22 375 42.220.30 46 568 2245 337 3310 243 146
120 121
AX
c
Do
Lo
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDED FLANGES
AX1FU / ID no. 42
PN 25 - with f lange dr i l l ing according to EN 1092-1
Weblink: 13103
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
FLANGE FLANGE
kg kg
Thickness c
mm
Thickness c
mm
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13103 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
This page is
intentionally
left blank
DN
Nominal diameter
50 15 6 28 125 42.257.10 20 69 27,9 130 167 1,6 5,2
50 22 17 43 180 42.257.20 20 68 27,1 222 104 2,6 5,5
65 16 6 24 135 42.258.10 22 85 43,6 150 268 2,6 6,7
65 29 24 45 230 42.258.20 22 84 42,4 270 112 5,4 7,7
80 20 5 23 145 42.259.10 24 113 77,6 191 612 4,3 8,7
80 31 13 36 195 42.259.20 24 112 74,9 241 288 6,7 9,6
100 23 4 20 140 42.260.10 26 142 126 266 1850 6 12,5
100 36 12 33 195 42.260.20 26 138 120 230 474 11 12,9
125 28 5 21 170 42.261.10 28 170 184 223 1240 13 17,3
125 43 12 32 210 42.261.20 28 171 181 279 716 17 19,4
150 25 3 15 175 42.262.10 30 206 268 452 5610 16 21,4
150 47 13 29 240 42.262.20 30 203 261 321 900 28 23,3
200 27 2 13 170 42.264.10 32 257 431 585 12300 26 31,3
200 51 9 24 225 42.264.20 32 259 435 313 1720 41 32,2
200 60 17 29 290 42.264.30 32 257 427 352 1040 60 36,9
250 24 2 9 180 42.265.10 35 309 650 718 24000 41 42,7
250 46 7 18 230 42.265.20 35 311 655 372 3740 62 46,6
250 63 14 24 305 42.265.30 35 314 657 358 1670 92 50,7
300 30 2 10 200 42.266.10 38 360 901 622 19800 65 57,9
300 48 7 16 255 42.266.20 38 360 901 389 4480 97 59,9
300 65 11 21 280 42.266.30 38 370 922 358 2820 114 64,9
350 28 2 8 210 42.267.10 42 391 1076 702 26400 79 87,9
350 45 6 13 265 42.267.20 42 391 1076 438 6030 118 87,9
350 62 9 18 290 42.267.30 42 401 1100 392 3780 138 92,8
400 28 2 7 235 42.268.10 48 450 1416 1060 49400 115 120
400 46 5 12 275 42.268.20 48 452 1423 637 13400 148 123
400 82 15 21 375 42.268.30 48 459 1441 435 2890 248 140
122 123
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 2,5
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Weblink: 13104
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
To be continued...
DN
Nominal diameter
WEIGHT
kg
50 23 14 44 215 43.057.10 60,3 2,9 69 27,9 88 61 0,3 0,7
50 38 39 50 280 43.057.20 60,3 2,9 69 27,9 54 15 0,4 0,8
65 27 12 40 205 43.058.10 76,1 2,9 87 46,0 82 112 0,4 0,8
65 43 32 50 270 43.058.20 76,1 2,9 87 46,0 80 39 0,6 1,3
80 26 6 29 165 43.059.10 88,9 3,2 114 79,4 109 449 0,5 1,2
80 43 17 49 210 43.059.20 88,9 3,2 114 79,4 66 86 0,7 1,4
80 65 39 50 270 43.059.30 88,9 3,2 114 79,4 44 24 1,1 1,5
100 37 7 32 165 43.060.10 114,3 3,6 145 131 95 507 0,8 1,7
100 53 15 47 200 43.060.20 114,3 3,6 144 130 64 138 1,1 1,7
100 92 46 50 275 43.060.30 114,3 3,6 144 129 59 39 1,7 2,6
125 38 6 28 165 43.061.10 139,7 4 171 188 93 831 1,2 2,2
125 65 18 48 215 43.061.20 139,7 4 171 187 85 206 1,8 3,2
125 97 50 50 315 43.061.30 139,7 4 172 186 71 64 3,1 4,9
150 41 5 25 175 43.062.10 168,3 4,5 204 271 113 980 2 2,6
150 83 24 50 250 43.062.20 168,3 4,5 204 271 57 106 3,2 3,4
150 123 73 50 405 43.062.30 168,3 4,5 203 266 70 46 6,1 6,8
200 57 7 27 190 43.064.10 219,1 6,3 257 442 87 841 3,5 4,5
200 92 24 44 275 43.064.20 219,1 6,3 259 441 104 304 6,1 7,3
200 114 37 50 310 43.064.30 219,1 6,3 259 444 54 110 7,1 7,1
250 50 5 19 190 43.065.10 273 6,3 309 663 92 1780 5,3 6,1
250 109 28 42 310 43.065.20 273 6,3 314 673 56 203 11 8,8
250 149 56 50 400 43.065.30 273 6,3 313 667 64 115 16 14,3
300 63 6 21 190 43.066.10 323,9 7,1 365 927 124 3140 7,8 9,1
300 119 18 39 245 43.066.20 323,9 7,1 370 943 46 321 11 8,5
300 159 53 50 415 43.066.30 323,9 7,1 365 923 61 150 22 17,6
350 54 3 16 190 43.067.10 355,6 6,3 404 1132 87 4010 7,6 8,5
350 117 16 35 265 43.067.20 355,6 6,3 402 1126 45 415 13 9,8
350 167 48 50 415 43.067.30 355,6 6,3 400 1113 60 194 25 19,7
400 78 7 20 230 43.068.10 406,4 6,3 461 1478 107 2680 15 12,5
400 130 20 34 305 43.068.20 406,4 6,3 461 1478 65 538 21 14,5
400 183 45 48 410 43.068.30 406,4 6,3 457 1459 70 261 32 22,7
450 74 6 17 230 43.069.10 457 6,3 511 1842 110 3930 18 14,0
450 124 17 29 305 43.069.20 457 6,3 511 1842 66 777 27 16,3
450 191 42 45 410 43.069.30 457 6,3 510 1832 68 325 40 22,1
500 82 6 17 240 43.070.10 508 6,3 566 2263 131 4380 25 15,7
500 140 20 29 340 43.070.20 508 6,3 564 2254 75 721 39 18,2
500 211 46 45 445 43.070.30 508 6,3 564 2248 79 338 55 28,3
600 75 5 13 240 43.072.10 610 6 679 3257 214 11200 43 17,3
600 132 15 23 330 43.072.20 610 6 679 3257 123 1900 56 23,9
600 207 38 36 450 43.072.30 610 6 679 3257 78 477 82 25,9
700 73 4 11 260 43.074.10 711 6 777 4335 221 17300 58 25,5
700 131 13 20 350 43.074.20 711 6 778 4341 124 2830 75 29,9
700 220 35 33 470 43.074.30 711 6 781 4358 76 633 109 36,6
800 62 2 8 230 43.076.10 813 6 886 5654 268 50100 79 29,2
800 124 9 16 320 43.076.20 813 6 886 5654 134 5270 87 29,2
800 219 31 29 470 43.076.30 813 6 884 5640 76 882 141 41,9
900 63 2 7 230 43.078.10 914 6 990 7110 265 64900 99 27,2
900 126 8 15 320 43.078.20 914 6 990 7110 133 6840 109 38,5
900 211 24 25 440 43.078.30 914 6 990 7110 80 1420 163 41,5
1000 66 2 7 230 43.080.10 1016 6 1096 8749 255 77700 121 36,5
1000 115 5 12 290 43.080.20 1016 6 1098 8765 149 13400 122 42,8
1000 211 22 22 440 43.080.30 1016 6 1093 8724 80 1850 200 46,1
1100 84 3 8 280 43.081.10 1120 6 1198 10540 202 40700 140 43,6
1100 137 9 13 370 43.081.20 1120 6 1194 10503 125 7920 182 50,5
1100 228 23 22 485 43.081.30 1120 6 1197 10531 75 1860 260 61,2
124 125
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 2,5
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
1200 80 2 7 315 43.082.10 1220 6 1264 11794 215 48500 161 47,5
1200 136 8 12 400 43.082.20 1220 6 1264 11813 128 9760 201 55,0
1200 211 22 19 555 43.082.30 1220 6 1259 11765 84 2180 322 66,6
1300 62 1 5 285 43.083.10 1320 6 1366 13818 285 146500 200 47,4
1300 96 3 8 345 43.083.20 1320 6 1364 13818 186 32700 201 51,4
1300 180 13 15 460 43.083.30 1320 6 1364 13797 99 5220 287 63,9
1400 62 1 4 285 43.084.10 1420 6 1466 15980 295 179900 234 51,0
1400 96 3 7 345 43.084.20 1420 6 1464 15980 194 40400 234 55,4
1400 179 12 14 460 43.084.30 1420 6 1464 15958 103 6470 333 68,8
1500 60 1 4 285 43.085.10 1520 6 1565 18287 316 223900 272 54,5
1500 95 3 7 345 43.085.20 1520 6 1564 18299 203 49300 269 59,2
1500 178 11 13 460 43.085.30 1520 6 1564 18275 108 7910 382 73,5
1600 59 1 4 285 43.086.10 1620 6 1664 20750 336 275800 313 58,2
1600 95 3 6 345 43.086.20 1620 6 1664 20776 212 59400 308 63,1
1600 178 10 12 460 43.086.30 1620 6 1664 20750 112 9550 435 78,4
1700 58 1 3 285 43.087.10 1720 6 1763 23368 358 336300 359 61,8
1700 94 3 6 345 43.087.20 1720 6 1764 23409 222 70700 349 67,1
1700 174 10 11 460 43.087.30 1720 6 1763 23368 120 11800 492 83,3
1800 56 1 3 285 43.088.10 1820 6 1864 26142 386 407000 409 62,5
1800 94 2 5 345 43.088.20 1820 6 1864 26199 231 83400 393 70,9
1800 170 9 10 460 43.088.30 1820 6 1864 26142 128 14400 554 88,1
1900 54 0 3 285 43.089.10 1920 6 1962 29117 424 505600 467 65,9
1900 92 2 5 345 43.089.20 1920 6 1963 29132 247 100700 442 74,9
1900 166 8 9 465 43.089.30 1920 6 1963 29132 137 17000 629 93,0
2000 53 0 3 285 43.090.10 2020 6 2061 32204 454 603800 527 72,6
2000 88 2 4 345 43.090.20 2020 6 2061 32204 273 124900 498 78,8
2000 159 7 9 465 43.090.30 2020 6 2061 32204 152 21300 699 97,9
2100 65 1 3 285 43.091.10 2120 6 2160 35449 411 589500 601 77,3
2100 111 2 5 345 43.091.20 2120 6 2161 35466 240 115200 547 89,2
2100 205 9 11 465 43.091.30 2120 6 2162 35483 129 18400 767 114
2200 65 0 3 285 43.092.10 2220 6 2260 38865 424 672000 665 81,0
2200 109 2 5 345 43.092.20 2220 6 2260 38865 254 136100 606 93,4
2200 197 8 10 470 43.092.30 2220 6 2260 38865 141 22000 858 119
126 127
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 6
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
50 23 14 44 215 43.107.10 60,3 2,9 69 27,9 88 61 0,6 0,7
50 40 48 50 315 43.107.20 60,3 2,9 69 27,9 79 15 1,1 1,1
65 26 11 38 205 43.108.10 76,1 2,9 87 46,0 84 112 0,8 0,8
65 43 32 50 270 43.108.20 76,1 2,9 87 46,0 81 39 1,4 1,3
80 25 6 28 165 43.109.10 88,9 3,2 114 79,4 110 449 1,1 1,2
80 42 17 47 210 43.109.20 88,9 3,2 114 79,4 66 86 1,6 1,4
80 59 37 50 275 43.109.30 88,9 3,2 114 77,3 100 52 2,5 2,3
100 35 6 31 165 43.110.10 114,3 3,6 145 131 94 507 1,7 1,7
100 53 15 47 205 43.110.20 114,3 3,6 144 129 98 187 2,5 2,0
100 76 42 50 295 43.110.30 114,3 3,6 145 127 118 81 4,5 4,3
125 35 5 25 165 43.111.10 139,7 4 171 188 92 831 2,4 2,2
125 62 17 46 215 43.111.20 139,7 4 171 187 85 206 4 3,2
125 82 43 50 320 43.111.30 139,7 4 170 182 111 103 7,2 6,1
150 38 5 23 175 43.112.10 168,3 4,5 204 271 112 980 4,1 2,6
150 65 20 40 260 43.112.20 168,3 4,5 204 267 131 295 7,9 4,9
150 103 53 50 365 43.112.30 168,3 4,5 204 262 152 124 13 9,0
200 51 6 24 190 43.114.10 219,1 6,3 257 442 86 841 7,5 4,5
200 88 23 42 275 43.114.20 219,1 6,3 259 441 106 304 14 7,3
200 110 38 50 325 43.114.30 219,1 6,3 259 435 154 265 18 11,3
250 46 5 18 190 43.115.10 273 6,3 309 663 94 1780 12 6,1
250 86 18 33 275 43.115.20 273 6,3 314 670 109 556 22 9,1
250 111 37 44 365 43.115.30 273 6,3 310 656 117 288 32 14,9
300 58 5 19 190 43.116.10 323,9 7,1 365 927 127 3140 17 9,1
300 84 12 28 235 43.116.20 323,9 7,1 364 924 87 915 23 10,0
300 115 24 38 295 43.116.30 323,9 7,1 370 933 121 644 33 15,0
350 55 4 16 210 43.117.10 355,6 6,3 396 1104 131 4250 20 9,5
350 89 11 27 255 43.117.20 355,6 6,3 398 1110 83 1040 28 12,4
350 123 27 37 350 43.117.30 355,6 6,3 400 1108 112 570 46 20,6
400 65 7 17 250 43.118.10 406,4 6,3 453 1451 114 2470 35 12,5
400 117 19 31 315 43.118.20 406,4 6,3 458 1462 105 829 52 18,0
400 147 42 39 455 43.118.30 406,4 6,3 455 1441 145 505 87 32,7
450 54 4 12 235 43.119.10 457 6,3 510 1836 179 6840 42 15,5
450 90 11 21 290 43.119.20 457 6,3 514 1851 107 1680 58 18,3
450 157 34 37 410 43.119.30 457 6,3 513 1830 140 742 96 31,1
500 61 5 13 245 43.120.10 508 6,3 568 2273 196 7000 58 17,3
500 108 16 23 340 43.120.20 508 6,3 567 2269 112 1250 91 20,4
500 171 36 36 440 43.120.30 508 6,3 569 2259 161 805 131 41,0
600 63 5 11 275 43.122.10 610 6 666 3191 237 8800 98 20,1
600 131 16 23 340 43.122.20 610 6 681 3256 185 2420 134 30,4
600 189 34 33 440 43.122.30 610 6 679 3235 180 1140 188 48,5
700 57 4 8 295 43.124.10 711 6 762 4248 279 14900 133 22,2
700 121 12 18 360 43.124.20 711 6 776 4316 201 4200 178 37,5
700 195 33 30 495 43.124.30 711 6 775 4298 175 1400 276 58,6
800 68 3 9 265 43.126.10 813 8 878 5586 364 34500 163 40,9
800 119 11 16 360 43.126.20 813 8 878 5586 208 6020 231 48,4
800 208 28 28 460 43.126.30 813 8 885 5618 171 1980 327 72,5
900 65 3 7 265 43.128.10 914 8 979 7011 390 49000 208 39,0
900 116 9 14 360 43.128.20 914 8 980 7019 218 8320 291 54,5
900 199 24 24 460 43.128.30 914 8 986 7047 178 2860 410 81,7
1000 62 2 6 265 43.130.10 1016 8 1080 8599 424 67600 258 43,4
1000 109 8 11 360 43.130.20 1016 8 1080 8599 242 12000 360 60,6
1000 211 23 23 460 43.130.30 1016 8 1092 8679 171 3330 504 78,2
1100 68 3 6 320 43.131.10 1120 8 1184 10424 420 52500 360 55,9
1100 110 8 10 415 43.131.20 1120 8 1184 10424 261 12700 500 66,2
1100 200 20 19 480 43.131.30 1120 8 1200 10569 184 4720 617 90,9
1200 66 3 6 350 43.132.10 1220 8 1248 11652 452 68000 397 66,5
1200 114 8 10 445 43.132.20 1220 8 1251 11681 254 14200 550 77,7
1200 214 22 20 545 43.132.30 1220 8 1263 11781 175 4360 745 114
128 129
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 10
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 185 43.154.10 33,7 2,6 40 9,2 96 43 0,3 0,3
32 15 8 41 175 43.155.10 42,4 2,6 50 13,6 89 68 0,3 0,5
40 19 16 46 225 43.156.10 48,3 2,6 55 17,0 102 39 0,6 0,5
50 18 9 34 195 43.157.10 60,3 2,9 69 27,9 110 116 0,8 0,7
50 31 28 50 265 43.157.20 60,3 2,9 69 27,9 105 34 1,3 1,1
65 25 11 37 205 43.158.10 76,1 2,9 87 46,0 85 112 1,4 0,8
65 36 25 50 260 43.158.20 76,1 2,9 86 45,4 98 54 2,1 1,2
80 23 5 26 165 43.159.10 88,9 3,2 114 79,4 111 449 1,7 1,2
80 33 11 37 195 43.159.20 88,9 3,2 114 78,4 128 231 2,3 1,4
80 46 29 50 275 43.159.30 88,9 3,2 113 76,7 127 84 4 2,3
100 30 5 26 165 43.160.10 114,3 3,6 144 130 95 539 2,7 1,5
100 43 13 39 205 43.160.20 114,3 3,6 141 126 107 239 4 2,3
100 57 32 50 295 43.160.30 114,3 3,6 140 122 152 129 7,1 4,3
125 30 4 22 165 43.161.10 139,7 4 170 187 96 886 3,8 1,9
125 45 11 33 205 43.161.20 139,7 4 168 183 105 364 5,8 2,8
125 63 27 47 280 43.161.30 139,7 4 169 181 144 204 9,7 5,4
150 28 3 17 160 43.162.10 168,3 4,5 203 268 220 3380 5,8 3,2
150 61 17 37 245 43.162.20 168,3 4,5 206 270 139 344 12 4,3
150 71 33 45 340 43.162.30 168,3 4,5 198 256 172 207 19 5,9
200 35 4 17 180 43.164.10 219,1 6,3 257 437 251 3980 12 6,1
200 67 13 32 225 43.164.20 219,1 6,3 262 446 139 703 18 6,5
200 91 26 44 290 43.164.30 219,1 6,3 259 435 185 440 25 11,3
250 35 3 13 180 43.165.10 273 6,3 313 667 258 6760 19 6,8
250 65 10 25 225 43.165.20 273 6,3 317 677 142 1280 26 8,1
250 95 24 37 310 43.165.30 273 6,3 313 659 180 632 42 15,8
300 39 3 12 180 43.166.10 323,9 7,1 368 932 238 8620 26 10,3
300 91 16 30 265 43.166.20 323,9 7,1 370 933 150 1080 47 13,5
300 115 28 38 335 43.166.30 323,9 7,1 373 930 200 788 66 22,8
350 37 2 11 200 43.167.10 355,6 6,3 399 1110 257 11700 31 11,8
350 82 10 24 250 43.167.20 355,6 6,3 407 1129 171 2240 45 17,0
350 106 21 32 325 43.167.30 355,6 6,3 400 1103 170 1050 68 21,8
400 47 3 12 200 43.168.10 406,4 6,3 459 1459 357 18400 45 15,5
400 93 15 24 320 43.168.20 406,4 6,3 459 1461 159 1410 88 20,6
400 123 27 32 385 43.168.30 406,4 6,3 458 1443 228 1150 115 32,6
450 66 6 15 240 43.169.10 457 8,8 508 1818 255 7610 70 23,0
450 101 14 23 305 43.169.20 457 8,8 515 1838 215 2640 104 31,4
450 143 34 34 435 43.169.30 457 8,8 515 1822 247 1180 172 54,1
500 39 2 8 200 43.170.10 508 8,8 562 2236 531 49400 80 23,0
500 96 10 20 280 43.170.20 508 8,8 568 2254 296 4960 115 31,8
500 141 26 30 395 43.170.30 508 8,8 569 2249 251 1670 186 44,5
600 42 2 7 215 43.172.10 610 8 660 3147 663 65100 131 26,3
600 106 11 19 315 43.172.20 610 8 669 3183 327 5790 196 36,8
600 175 37 31 495 43.172.30 610 8 678 3208 295 1600 361 70,9
700 62 3 9 270 43.174.10 711 8 772 4280 536 35000 205 33,9
700 109 12 16 365 43.174.20 711 8 772 4280 306 6340 298 50,0
700 183 30 28 480 43.174.30 711 8 784 4327 294 2430 444 72,1
130 131
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 16
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
DN
Nominal diameter
WEIGHT
kg
25 12 9 40 185 43.204.10 33,7 2,6 40 9,2 97 43 0,4 0,3
32 15 8 41 175 43.205.10 42,4 2,6 50 13,6 89 68 0,5 0,5
40 18 16 44 235 43.206.10 48,3 2,6 55 17,0 174 56 1,1 0,6
50 18 9 34 195 43.207.10 60,3 2,9 69 27,9 111 116 1,2 0,7
50 28 27 50 275 43.207.20 60,3 2,9 68 27,1 173 51 2,2 1,3
65 20 8 30 195 43.208.10 76,1 2,9 86 45,4 107 182 1,9 0,9
65 37 27 50 270 43.208.20 76,1 2,9 87 45,3 176 85 3,4 1,6
80 21 5 24 170 43.209.10 88,9 3,2 113 78,6 119 411 2,8 1,2
80 40 21 47 245 43.209.20 88,9 3,2 112 74,9 190 161 5,2 2,3
100 29 5 26 170 43.210.10 114,3 3,6 143 128 152 743 4,4 2,0
100 43 14 39 215 43.210.20 114,3 3,6 141 123 190 354 6,8 3,1
125 19 2 14 155 43.211.10 139,7 4 170 186 198 3070 5,4 2,3
125 40 9 29 195 43.211.20 139,7 4 173 187 163 715 8,6 3,0
125 50 15 37 230 43.211.30 139,7 4 172 184 183 431 12 4,7
150 24 3 14 165 43.212.10 168,3 4,5 205 269 330 4890 9,6 3,7
150 40 7 24 195 43.212.20 168,3 4,5 208 273 202 1140 13 3,7
150 63 19 39 255 43.212.30 168,3 4,5 206 265 247 526 20 6,9
200 32 3 15 165 43.214.10 219,1 6,3 261 442 393 8970 17 6,9
200 60 12 29 230 43.214.20 219,1 6,3 259 438 206 1050 28 8,6
200 75 25 36 320 43.214.30 219,1 6,3 257 427 278 617 45 14,9
250 34 4 13 195 43.215.10 273 6,3 309 658 269 5220 32 8,1
250 59 9 23 230 43.215.20 273 6,3 314 666 218 1890 43 10,8
250 80 24 31 340 43.215.30 273 6,3 312 652 282 866 75 18,7
300 28 1 9 165 43.216.10 323,9 7,1 365 919 469 27100 36 11,1
300 63 8 21 220 43.216.20 323,9 7,1 370 928 282 3750 56 15,4
300 89 20 29 320 43.216.30 323,9 7,1 369 920 259 1220 98 20,4
350 34 2 10 205 43.217.10 355,6 8 396 1096 406 16500 50 12,9
350 60 7 18 240 43.217.20 355,6 8 401 1106 299 5100 67 19,1
350 90 19 27 335 43.217.30 355,6 8 402 1103 262 1580 114 30,2
400 45 4 12 225 43.218.10 406,4 8,8 458 1451 464 15100 81 22,9
400 71 10 18 290 43.218.20 406,4 8,8 457 1447 297 3600 120 25,4
400 97 16 25 315 43.218.30 406,4 8,8 462 1457 288 2350 137 32,2
450 42 3 10 225 43.219.10 457 8,8 507 1808 525 22800 103 25,8
450 68 8 16 290 43.219.20 457 8,8 507 1808 326 5230 151 28,6
450 95 14 22 315 43.219.30 457 8,8 513 1822 300 3250 172 36,3
500 49 4 10 255 43.220.10 508 8,8 559 2217 562 18400 158 23,4
500 68 8 14 310 43.220.20 508 8,8 559 2217 404 6550 207 31,8
500 103 15 22 340 43.220.30 508 8,8 568 2245 337 3430 239 40,3
132 133
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 25
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
This page is
intentionally
left blank
DN
Nominal diameter
WEIGHT
kg
50 15 6 28 185 43.257.10 60,3 2,9 69 27,9 130 167 1,6 0,7
50 22 17 43 240 43.257.20 60,3 2,9 68 27,1 222 104 2,6 1,0
65 16 6 24 195 43.258.10 76,1 3,6 85 43,6 150 242 2,8 1,0
65 29 24 45 285 43.258.20 76,1 3,6 84 42,4 270 112 5,4 2,0
80 20 5 23 170 43.259.10 88,9 3,2 113 77,6 191 655 4,2 1,4
80 31 13 36 220 43.259.20 88,9 3,2 112 74,9 241 288 6,7 2,3
100 23 4 20 160 43.260.10 114,3 3,6 142 126 266 1850 6 2,3
100 36 12 33 215 43.260.20 114,3 3,6 138 120 230 474 11 2,6
125 28 5 21 185 43.261.10 139,7 4 170 184 223 1300 12 3,4
125 43 12 32 225 43.261.20 139,7 4 171 181 279 703 17 5,5
150 25 3 15 165 43.262.10 168,3 4,5 206 268 452 6060 15 4,5
150 47 13 29 240 43.262.20 168,3 4,5 203 261 321 915 28 6,9
200 27 2 13 170 43.264.10 219,1 6,3 257 431 585 11900 26 7,7
200 51 9 24 220 43.264.20 219,1 6,3 259 435 313 1820 40 10,0
200 60 17 29 285 43.264.30 219,1 6,3 257 427 352 1060 59 13,3
250 24 2 9 170 43.265.10 273 6,3 309 650 718 25600 40 9,7
250 46 7 18 225 43.265.20 273 6,3 311 655 372 3610 63 12,5
250 63 14 24 285 43.265.30 273 6,3 314 657 358 1670 92 16,6
300 30 2 10 190 43.266.10 323,9 7,1 360 901 622 18600 67 13,4
300 48 7 16 240 43.266.20 323,9 7,1 360 901 389 4480 97 15,4
300 65 11 21 265 43.266.30 323,9 7,1 370 922 358 2760 115 20,4
350 28 2 8 210 43.267.10 355,6 8 391 1076 702 25600 80 16,9
350 45 6 13 260 43.267.20 355,6 8 391 1076 438 6320 115 19,1
350 62 9 18 285 43.267.30 355,6 8 401 1100 392 3860 136 24,5
400 28 2 7 210 43.268.10 406,4 8,8 450 1416 1060 49400 115 22,9
400 46 5 12 255 43.268.20 406,4 8,8 452 1423 637 12600 152 21,3
400 82 15 21 350 43.268.30 406,4 8,8 459 1441 435 2890 248 32,8
134 135
AX
Do
Lo
s D
B022016-1 – Subject to alterations and eventual misprintsB022016-1 – Subject to alterations and eventual misprints
AXIAL EXPANSION JOINTS WITH WELDING ENDS
AX1SU / ID no. 43
PN 40
Weblink: 13104
DN
Nominal diameter
MOVEMENT MOVEMENTLENGTH LENGTHID no. ID no.WEIGHT
AX
2δNmm
AX
2δNmm
AN
2αNdeg.
AN
2αNdeg.
LA
2λNmm
LA
2λNmm
Built-inlength
Lomm
Built-inlength
Lomm
AX
CδN/mm
AX
CδN/mm
LA
CλN/mm
LA
CλN/mm
ADJUSTING FORCES ADJUSTING FORCES
AN
CαNm/deg.
AN
CαNm/deg.
WELDING ENDS WELDING ENDS
Outsidediameter
Dmm
Outsidediameter
Dmm
Wallthickness
smm
Wallthickness
smmkg
Outside diameter
Domm
Outside diameter
Domm
BELLOW BELLOW
Ef. cross-section
Acm2
Ef. cross-section
Acm2
Important: The movements should be
considered alternatives. The total accumu-
lated coeicient of utilisation cannot
exceed 1.
Please refer to WebLink 13104 or the
QR code to access online tools and
online inquiry/order form and more
information about: Primer, connection
ends, inner sleeve, cover etc.
Design code: EN 14917
Temperature: Calculated at 20°C (EN 1333)
Minimum fatigue life: 1000 cycles
This page is
intentionally
left blank
DN
Nominal diameter
WEIGHT
kg
50 13 5 25 200 43.307.10 60,3 2,9 69 27,9 248 380 2,3 0,8
50 18 11 33 240 43.307.20 60,3 2,9 71 29,8 282 191 3,9 1,1
65 15 6 23 215 43.308.10 76,1 3,6 85 43,6 253 408 4,3 1,2
65 23 14 34 265 43.308.20 76,1 3,6 87 46,0 366 270 7,3 1,8
80 18 4 21 195 43.309.10 88,9 3,2 111 75,0 321 1010 6,8 1,6
80 27 10 29 230 43.309.20 88,9 3,2 121 84,8 398 632 12 2,7
100 20 5 18 205 43.310.10 114,3 3,6 139 123 303 1220 13 2,3
100 31 10 27 245 43.310.20 114,3 3,6 145 131 402 847 20 3,6
125 24 5 18 210 43.311.10 139,7 4 167 178 387 2010 20 3,4
125 33 9 24 245 43.311.20 139,7 4 173 190 384 1110 29 4,5
150 30 6 18 225 43.312.10 168,3 4,5 201 258 510 2630 33 5,3
150 43 13 26 290 43.312.20 168,3 4,5 209 276 493 1140 57 7,5
200 35 7 17 250 43.314.10 219,1 6,3 254 422 633 3820 67 9,5
200 45 11 21 285 43.314.20 219,1 6,3 262 451 501 2010 89 11,1
250 36 5 14 250 43.315.10 273 6,3 310 648 679 6460 103 12,3
250 52 12 20 315 43.315.20 273 6,3 322 691 592 2680 162 17,9
300 38 5 12 255 43.316.10 323,9 7,1 367 909 852 10600 152 18,6
300 55 12 18 335 43.316.20 323,9 7,1 373 948 612 3180 243 24,9