automatic partition assembler (corrugated board partitions) · sembly of corrugated board...
TRANSCRIPT
ANDAXAutomatic Partition Assembler
(corrugated board partitions)
INCORPORATING RODA›
ANDAX is a very robust and versatile machine designed for the automatic as-sembly of corrugated board partitions.
It can handle all types of corrugated board, from E-fl ute to double wall in-cluding microfl ute and twin dual, with maximum consistency and produc-tivity.
The machine is manufactured from SOLEMA and integrate the best of the 70 years RODA technology and expertise in construction of highly reliable as-sembly machines.
Relatively small footprint of ANDAX allows its application even in very narrow places.
ANDAX is endowed with a PLC with touch screen interface for job settings and to enable the possibility of saving all parameters of specifi c product to be recalled in case of a repetitive work, minimizing machine’s set up time.
Production rates up to max. 50 partition sets/minute (depending on parti-tions dimensions) and is delivered in standard confi guration with six lon-gitudinal channels and the possibility of inserting up to twenty four cross elements.
For an optimized running speed and productivity the machine can be optio-nally supplied with:
• Duplex feeders: automatic feed of longitudinal elements (up to six channels fed automatically)
• Collapser: automatic folding, counting and batching of assembled partition on a delivery table
DUPLEX (optional)
CROSS ELEMENTS FEEDINGLONGITUDINAL ELEMENTS PROCESSING
COLLAPSER (optional)
Longitudinal elements have to be fed vertically onto the conveyor belt, inside the guiding channels. The standard machine is endo-wed with 6 guiding channels. The feeding operation of 6 channels can be done by hand or by means of DUPLEX (optional).
Cross dividers feeder is built on the top of the interlocking area, in the middle of the machine. The elements are kept upright by a pressure system and moved to the injection area by means of belts.
To load the longitudinal elements into the guiding channel, machi-ne can be endowed with automatic feeders to feed the elements out of a special hopper where elements are stacked. DUPLEX feeder can be placed on the right and/or left of the machine’s main belt. Each DUPLEX can feed max. 3 guiding channels.
After assembly, partitions can be collapsed (automatically folded fl at), counted and divided into batches and delivered onto a deli-very table ready to be packed by means of the COLLAPSER automatic delivery device (optional).
1 2
6 7
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
TOUCH SCREEN / ELECTRICAL CABINETINTERLOCKING OF ELEMENTS
Once the longitudinal elements reaches the correct position, they are detected from a photocell which activates the short stroke pi-ston that pushes cross elements through 2 high speed running rollers to ensure a precise penetration of cross elements through the longitudinal ones.
The machine is controlled and operated from the touch screen panel installed on electrical cabinet. From this HMI the operator processes and save data related to the different partitions like: number of cuts in longitudinal element, motors speed, injection timing, etc
1
3 5
54
6
6
23
7
4
ANDAX is a very robust and versatile machine designed for the automatic as-sembly of corrugated board partitions.
It can handle all types of corrugated board, from E-fl ute to double wall in-cluding microfl ute and twin dual, with maximum consistency and produc-tivity.
The machine is manufactured from SOLEMA and integrate the best of the 70 years RODA technology and expertise in construction of highly reliable as-sembly machines.
Relatively small footprint of ANDAX allows its application even in very narrow places.
ANDAX is endowed with a PLC with touch screen interface for job settings and to enable the possibility of saving all parameters of specifi c product to be recalled in case of a repetitive work, minimizing machine’s set up time.
Production rates up to max. 50 partition sets/minute (depending on parti-tions dimensions) and is delivered in standard confi guration with six lon-gitudinal channels and the possibility of inserting up to twenty four cross elements.
For an optimized running speed and productivity the machine can be optio-nally supplied with:
• Duplex feeders: automatic feed of longitudinal elements (up to six channels fed automatically)
• Collapser: automatic folding, counting and batching of assembled partition on a delivery table
DUPLEX (optional)
CROSS ELEMENTS FEEDINGLONGITUDINAL ELEMENTS PROCESSING
COLLAPSER (optional)
Longitudinal elements have to be fed vertically onto the conveyor belt, inside the guiding channels. The standard machine is endo-wed with 6 guiding channels. The feeding operation of 6 channels can be done by hand or by means of DUPLEX (optional).
Cross dividers feeder is built on the top of the interlocking area, in the middle of the machine. The elements are kept upright by a pressure system and moved to the injection area by means of belts.
To load the longitudinal elements into the guiding channel, machi-ne can be endowed with automatic feeders to feed the elements out of a special hopper where elements are stacked. DUPLEX feeder can be placed on the right and/or left of the machine’s main belt. Each DUPLEX can feed max. 3 guiding channels.
After assembly, partitions can be collapsed (automatically folded fl at), counted and divided into batches and delivered onto a deli-very table ready to be packed by means of the COLLAPSER automatic delivery device (optional).
1 2
6 7
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
TOUCH SCREEN / ELECTRICAL CABINETINTERLOCKING OF ELEMENTS
Once the longitudinal elements reaches the correct position, they are detected from a photocell which activates the short stroke pi-ston that pushes cross elements through 2 high speed running rollers to ensure a precise penetration of cross elements through the longitudinal ones.
The machine is controlled and operated from the touch screen panel installed on electrical cabinet. From this HMI the operator processes and save data related to the different partitions like: number of cuts in longitudinal element, motors speed, injection timing, etc
1
3 5
54
6
6
23
7
4
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
A A
B B
C C
D D
E E
F F
Vers.
Data Descrizione modifica Dis.
21/09/2016
G. Magri J :\_Uf ficio Tec nico\Inv entor P rogett i\567 RO DA Andax (101)\_DISEG NI N UO VI ECO NVER TIT I\_567-A000-0 - C OMPLESSIVO . iam
Quantità
Data
DisegnatoreGrezzoTrattamento e/o Finitura
Materiale
Descrizione
Scala
Assieme Complessivo
A
E
BD
C
ANDAX
total weight with optional units approx. 3370 kg (7,430 lb)
Via Carducci, 18 — 24066 Pedrengo — Bergamo • ItalyTel. +39 035 654111 • Fax +39 035 654112e-mail: [email protected] • web: www.solema-boards.com
TECHNICAL DETAILS
PRODUCTS E — BC fl utes, min. 1.6 mm (8⁄128”)
SPEED max. 50 partitions/minute
MAIN BELT SPEED min. 5,4 m/minute (17 ft/minute) — max. 32,5 m/minute
(106 ft/minute)
CHANNELS FOR LONGITUDINAL ELEMENTS automatic version: 6 manual version: 8
TRANSVERSAL ELEMENTS INJECTIONS standard version: 24
LONGITUDINAL ELEMENTS LENGHT (A) automatic version: max. 850 mm (33 7⁄16”) manual version: max. 1150 mm (45 9⁄32”)
TRASVERSAL ELEMENTS LENGHT (B) max. 540 mm (21 17⁄74”)
PARTITION'S HEIGHT (C) min. 50 mm (1 31⁄32”) — max. 400 mm (15 3⁄4”)
CELL DIMENSIONS (D — E) (D) min. 35 mm (1 3⁄8”) (E) min. 15 mm (19⁄32”)
COLLECTION TABLE COLLAPSER max. bended partition lenght 1150 mm (45 9⁄32”)
ELECTRICAL REQUIREMENTS electrical power supply: 3 × 400 V PE 50 Hz controls voltage: 24 V DC
PNEUMATIC SYSTEM pressure: 6 bar
OPTIONAL DEVICES AVAILABLE DUPLEX Feeders COLLAPSER folder
4886 mm (16’ 1 1⁄4”) 3294 mm (10’ 9 3⁄4”)
2563
mm
(8’ 5
”)
3080
mm
(10’
1 1 ⁄ 4
”)
1419 mm (4’ 7 3⁄4”)
8196 mm (26’ 10 3⁄4”)
3079
mm
(10’
1 1 ⁄ 4
”)
3826
mm
(12’
6 3 ⁄ 4
”)
[ANDAX] [COLLAPSER]
[DU
PLE
X]
[DUPLEX]
[FULL MACHINE]
[CO
LLAP
SER
]
[FU
LL M
ACH
INE]
Dis
egni
, spe
cifi c
he e
mis
ure
sono
sog
gett
i a m
odifi
ca s
enza
pre
avvi
so. D
esig
n, s
peci
fi cat
ion
and
mea
sure
men
ts a
re s
ubje
ct to
cha
nge
with
out n
otic
e.An
daxE
NG
_2.0
.indd
› PERFORMANCES DEPEND ON PRODUCT’S SIZES, PRODUCT’S QUALITY AND OPERATING CONDITIONS
Solema USA inc315 Glenn Street - P.O. Box 472
Crawfordsville - IN - 47933
USA
tel. 765 361 0806 / fax 765 361 0989
FOR NORTH AMERICA