author index
TRANSCRIPT
-gas turbine technology to conlrol melal finish•ing, 11/98, p. 30
Washing Systems-aqueous, 9/98, p. 46
Waste Treatment-review of technical developments in, 2/98, pp.
34 and 68Wastewater
-from vibratory polishing, 11/98, p. 71Waterborne Coatings
-can give great looking fmishes but it may takesome tweaking, 9/98, p. 59
-record keeping and, 6/98, p. 120-review of technical developments in, 2/98, p. 52
Wipers-presaturated, 9/98, p. 42
Wire
-bondability, 1/98, p. 44X-ray
-fluorescence thickness and composition analy•sis, mathematical techniques for, 6/98, p. 88
Zinc-anodizing, 6/98, p. 114-barrel plating copper/nickel on die cast, 8/98, p.
58-generator tanks for the alkaline cyanide-free zinc
plater, 6/98, p. 106-phosphating in surface treatment of metals, en•
vironmental impact of, 9/98, p. 54-plating bath, characteristics of an alkaline tar•
Irate, 10/98, p. 10-plating, commercial quality, 11/98, p. 74-plating process using Taguchi's methodology,
performance improvement of a, 10/98, p. 24
-plating solution for kitchen plating, 1/98, p. 55-review of technical developments in elec-
Irodeposition of, 2/98, p. 23Zinc-Cobalt
-alloy from an alkaline sulfate bath containingtriethanolamine and gelatin, eleclrodeposi•tion of, 4/98, p. 24
-black on acid, 6/98, p. 125Zinc-Iron
-alloy from an alkaline zincate bath, eleclrodepo•sition of, 11/98, p. 54
Zincate-adhesion to 6101 series aluminum, 5/98, p. 58
AUTHOR INDEXAbd EI Rehim, S.S.
-The Effect of AC Superimposed on DC on theEleclroplating of Iron-Cobalt Alloys, 11/98,p.65
Abd EI-Ghaffar, M.A.-Mechanical and Corrosion Protection Properties
of Electroless Nickel-Polymer CompositeCoatings, 11/98, p. 58
Anderson, H.-Rectifier Monitors Reduce Expensive Failures,
8/98, p. 10Anicai, L.
-Analysis of ElCClrochemical Colored AluminumAnodic Films in AgNO, Based Electrolytesby Diffuse Reflectance Spectra, 12/98, p. 10
Atanassov, N.-Nickel-Tungsten Alloy from a Sulfamate Elec•
Irolyte, 6/98, p. 92Babu, A.S.
-Performance Improvement of a Zinc PlatingProcess Using Taguchi's Methodology: ACase Study, 10/98, p. 24
Bailey, D.E.-Optimizing Anodizing Baths with Diffusion Di•
alysis, 12/98, p. 14Baldwin, P.C.
-Final Thoughts Regarding Pulse Plating, 7/98, p.12
Baudrand, D.-Automotive Applications of Eleclroless Nickel,
5/98, p. 20Baxley, J.S.
-Coatings Emissions and Relative Ozone Forma•tion, 4/98, p. 33
Benaben, P.-lnfluence of Temperature on the Microstructure
and Properties of Chromium Eleclrodepos•its, 3/98, p. 52
Bercot, P.-Adaptation of a Mathematical Model to the In•
corporatipn of Silicon Carbide Particles inan Electroless Nickel Deposit, 4/98, p. 14
Bhojraj, H.-Electroless Nickel Plating on Magnesium Alloy,
3/98, p. 10Bibber, J.
-An Update on Chrome-Free Pretreatments forAluminum, 4/98, p. 28
Boddu, V.M.
-Pollution Prevention in an Aluminum GrindingFacility, 11/98, p. 18
Branch, L.C.-Bright Dipping Aluminum, 12/98, p. 24
Bratoeva, M.-Nickel-Tungsten Alloy from a Sulfamate Elec•
trolyte, 6/98, p. 92Burke, T.
-Shop Problems: Paints and Coatings, 1/98, p.68;
Busch, E.-Nickel- and Nitrite-Free Pretreatment of Car
Bodies, 5/98, p. 16Carroll, P.
-Mathematical Techniques for X-Ray Fluores•cence Thickness and Composition Analysis,6/98, p. 88
Chen, J.-A Composite Brush-Plated Coating with Appli•
cation in the Die, Industries, 5/98, p. 46Chen, S.
-A Composite Brush-Plated Coating with Appli•cation in the Die Industries, 5/98, p. 46
-Development of Iron Matrix Antifriction Com•posite Coatings, 10/98, p. 16
Chettri, R.-Risk Management Planning for Large Painting
Facilities, 4/98, p. 46Coons, J.
-Selecting Dust-Collecting Tools, 7/98, p. 25Crest, S.
-Programmed for Success-Excel to Statistical Process Conlrol, 2/98, p. 81-The End of SPC, 4/98, p. 57-Charting Your Organization, 6/98, p. 127-Networking Made Simple, 8/98, p. 51-Photographing Your Parts, 10/98, p. 47-Powerful Presenlations, 12/98, p. 47
Crotty, D.-Zinc Anodizing, 6/98, p. 114
Damron, M.-An Alternative to Anodization: Sol-Gel Solu•
tions for Metal Finishing, 12/98, p. 10Dodge, P.
-A New Technology for VOC Destruction, 11/98,p. 30
Du, Y.
-An Alternative to Anodization: Sol-Gel Solu•tions for Metal Finishing, 12/98, p. 35
Durkin, B.-Automotive Applications of Electroless Nickel,
5/98, p. 20Durut, F.
-Influence of Temperature on the MicroslrUctureand Properties of Chromium Elecuodepos•its, 3/98, p. 52
Eklund, W.-High-Heat-Resistant Powder Coatings, 9/98, p.
11Escarsega, J.A.
-Coatings Emissions and Relative Ozone Forma•tion, 4/98, p. 33
Fetter, S.D.-Compliance with the Primer and Topcoat MACT
Standards of the Aerospace NESHAP atLockheed Martin, 3/98, p. 34
Flott, L.W.-Quality Control-First Impressions: A View of Corporate Person-
ality, 1/98, p. 59-Training in the ISO/QS Framework, 2/98, p. 84-The Value of Quality: A Paradigm Whose Time
Has Come, 3/98, p. 61-Professionalism in a Changing World, 4/98, p.
62-OOPS!, 5/98, p. 60-An Ounce of What?, 6/98, p. 129-Setting Training Objectives, 7/98, p. 40-SPC Quandaries, 8/98. p. 47-From Russia with Help, 9/98, p. 66-Process Design, Innovation, and Control, 10/98,
p. 53-Elecuomagnetic Testing, 11/98, p. 60-Height Gauges, 12/98, p. 44
Ford, D.-High-Heat-Resistant Powder Coatings, 9/98, p.
11Forest, B.
-Influence of Temperature on the MieroslrUctureand Properties of Chromium Elecuodepos•its, 3/98, p. 52
Froehlich, R.W.-Coil Coating lOl. 11/98, p. 46
Gabe,D.R.-Throwing Power and Efficiency for Nickel Plat-
METAL FINISHING • DECEMBER 1998 87
ing Using Irregular-Shaped Anodes. 3/98. p.46
Gehmecker. H.-Nickel- and Nitrite-Free Pretreatment of Car
Bodies. 5/98. p. 16Gomes. C.R.
-Effect of Solution Composition in Nickel Elec•trodeposition on Silicon Surfaces. 1/98, p.49
Gottschlich. J.-Nickel- and Nitrite-Free Pretreatment of Car
Bodies, 5/98, p. 16Griffin. R.
-Zinc Anodizing, 6/98. p. 114Groshart. E.
-Finishing in the Grun-Reducing the Use of Organic Solvents in Clean-
ing, 2/98, p. 78Grosjean. A.
-Adaptation of a Mathematical Model to the In•corporation of Silicon Carbide Particles inan Electroless Nickel Deposit. 4/98, p. 14
Hadian. S.E.-Throwing Power and Efficiency for Nickel Plat•
ing Using Irregular-Shaped Anodes. 3/98. p.46
Hanley, J.T.-The EPA's New Test Method for Paint Overspray
Arrestors, 4/98, p. 39Hayes, W.O.
-Surprise MACT Attack: Several Metal FinishingCategories Face Case-by-Case MACT Pend•ing Issuance of Standards, 11/98, p. 38
Holland, R.-Zinc Generator Tanks for the Alkaline Cyanide•
Free Zinc Plater. 6/98:p. 106Hong, Q.
-Development of Iron Matrix Antifriction Com•posite Coatings. 10/98, p. 16
Honma. H.-Dissolution Behavior of Silver Anode in Succin•
imide-Silver Complex Bath. 5/98. p. 52Honma, H.
-Mirror-Bright Silver Plating from a Cyanide•Free Bath, 1/98. p. 16
Ibrahim, M.A.M.-The Effect of AC Superimposed on DC on the
Electroplating of Iron-Cobalt Alloys. 11/98.p.65
Inoue. H.-Dissolution Behavior of Silver Anode in Succin•
imide-Silver Complex Bath, 5/98, p. 52Inoue. H.
-Mirror-Bright Silver Plating from a Cyanide•Free Bath. 1/98. p. 16
Isawa, K.-Abrasion Resistance of Anodized Coatings on
Aluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester. 10/98, p. 36
Jakobson, S.-Zinc Anodizing, 6/98. p. 114
Joseph, R.-Environmental Coating Problems, 1/98, p. 62;
2/98. p. 88; 3/98. p. 71; 4/98, p. 60; 5/98, p.67; 6/98. p. 120; 7/98. p. 31; 8/98, p. 45;9/98. p. 59; 10/98, p. 51; 11/98, p. 75; 12198,p. 39
-The Environmental and Cost Benefits of PainterTraining. 3/98. p. 26
-How to Get the Most from HVLP Guns byUnderstanding Air Pressure and Volume.8/98. p. 20
Kieling. V.C.-Effect of Solution Composition in Nickel Elec•
trodeposition on Silicon Surfaces, 1/98, p.49
Krages. B.P.
88
-Environmental Monitoring Practices to Avoid.4/98, p. 44
-Practical Pollution Prevention: The East SidePlating Experience. 11/98. p. 26
Kraybill, D.-Pollution Prevention in an Aluminum Grinding
Facility. 11/98, p. 18Krishnan, R.M.
-characteristics of an Alkaline Tartrate Zinc Plat•ing Bath. 10/98, p. 10
Kuhn, A.-Passivating Stainless Steel: Making a Good Ma•
terial Better, 6/98. p. 100Kurucz. K.L.
-Compliance with the Primer and Topcoat MACTStandards of the Aerospace NESHAP atLockheed Martin. 3/98, p. 34
Lalvani. L.S.-Selective Removal of Chromate Anion by a New
Carbon Adsorbent. 5/98, p. 39Lalvani. S.B.
-Selective Removal of Chromate Anion by a NewCarbon Adsorbent, 5/98, p. 39
LaVine, M.-Choices, 8/98. p. 36
Lehtinen, T.-Presaturated Wipers in Surface Preparation: Re•
ducing Cost Through Process Control, 9/98.p.42
Lin. W.-A Composite Brush-Plated Coating with Appli•
cation in the Die Industries. 5/98, p. 46Ludwig, R.
-Zinc Generator Tanks for the Alkaline Cyanide•Free Zinc Plater, 6/98. p. 106
Maejima, M.-Abrasion Resistance of Anodized Coatings on
Aluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester, 10/98, p. 36
Mahoney, J.-Methods for Removing Moisture and Oil from
Compressed-Air Lines in Paint Facilities.3/98. p. 42
Mandich. N.V.-Selective Removal of Chromate Anion by a New
Carbon Adsorbent, 5/98, p. 39Masaki, S.
-Mirror-Bright Silver Plating from a Cyanide•Free Bath, 1/98, p. 16
-Dissolution Behavior of Silver Anode in Succin•imide-Silver Complex Bath, 5/98. p. 52
Mason. S.-Recycling Rinsewater Saves Money and Re•
duces Hazardous Wastes. 8/98. p. 16Matsuo, M.
-Abrasion Resistance of Anodized Coatings onAluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester, 10/98, p. 36
Mayes, R.-Electroless Nickeillmmersion Gold Finishes for
Application to Surface Mount Technology:A Regenerative Approach. 1/98. p. 42
Meghea, A.-Analysis of Electrochemical Colored Aluminum
Anodic Films in AgNO, Based Electrolytesby Diffuse Reflectance Spectra, 12/98. p. 10
Menens, J.S.-Stabilizing Chlorinated Solvents Under Condi•
tions of Extreme Use, 12/98. p. 30Menens. M.
-Multifunctional Coatings in the Automotive Fin•ishing Industry, 5/98, p. 10
Milad,G.-EIectroless Nickel/lmmersion Gold Finishes for
Application to Surface Mount Technology:A Regenerative Approach. 1/98. p. 42
Miller, M.
-High-Heat-Resistant Powder Coatings. 9/98. p.11
Mills, P.-Ultraviolet-Curable Powder Coatings, The Mar•
riage of Two Compliant Technologies. 1/98,p.38
Mishra. S.-Pollution Prevention in an Aluminum Grinding
Facility. 11/98. p. 18Mokhtar, S.M.
-Mechanical and Corrosion Protection Propeniesof Electroless Nickel-Polymer CompositeCoatings. 11/98. p. 58
Mooney, T.-Heard on the Hotline, 1/98, p. 55; 2/98, p. 90;
3/98, p. 65; 4/98, p. 54; 5/98, p. 56; 6/98, p.123; 7/98, p. 34; 8/98, p. 56; 9/98. p. 70;10/98. p. 56; 11/98. p. 70; 12/98, p. 49
Morgan, B.-Too Hot to Handle. 7/98. p. 8
Mueller. T.W.-Compliance with the Primer and Topcoat MACT
Standards of the Aerospace NESHAP atLockheed Martin. 3/98, p. 34
Mukherjee. A.-CPVC: A Versatile and Cost-Effective Material
for Metal-Finishing Applications. 8/98, p. 41Muralidharan, V.S.
-Characteristics of an Alkaline Tartrate Zinc Plat•ing Bath, 10/98. p. 10
Murphy, M.-Technical Developments in 1997: Inorganic
"Metallic" Fimshes. Processes. and Equip•ment, 2/98, p. 10
-Technical Developments in 1997: Organic Coat•ings, Processes, and Equipment, 2/98, p. 48
Narasimhamunhy, V.-Electrodeposition of Zinc-Cobalt Alloy from an
Alkaline Sulfate Bath Containing Triethano•lamine and Gelatin, 4/98, p. 24
Narayanamunhy. H.-Electroless Nickel Plating on Magnesium Alloy.
3/98, p. 10Nishina, K.
-Performance Improvement of a Zinc PlatingProcess Using Taguchi's Methodology: ACase Study, 10/98. p. 24
O'Connor, D.-Centrifugal Disk Finishing. 7/98, p. 27
Okada. K.-Abrasion Resistance of Anodized Coatings on
Aluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester. 10/98, p. 36
Peck. P.M.-Low Vapor Pressure Solvents: A Proven Tech•
nology for Environmentally CompliantCleaning, 9/98, p. 36
Phillips. J.-Legal Alert-Unilateral Orders--U.S. Environmental Protec-
tion Agency's Hammer for Enforcement,1/98. p. 52
-Recent Developments in Avoiding CERCLA Li•ability. 2/98. p. 86
-Making Your Insurance Company Cover CER•CLA Liability, 3/98. p. 69
-An Indemnification Wonh Having, 4/98. p. 52-Beware of "New Sources" When Relocating a
Factory, 5/98. p. 64-EPCRA Citizen Suits: What to Do When You
Get Sued. 6/98. p. 132-Trustee Liability Under CERCLA, 7/98. p. 38-Environmental Trespass. 8/98. p. 54-Lead Paint Chips-Another Hazanlous Waste
Story, 9/98. p. 62-Any Credible Evidence Will Do. 10/98, p. 49-A CERCLA Statute of Limitations. 11/98, p. 68
METAL FINISHING • DECEMBER 1998
-Environmental Humor, 12/98, p. 41Phipps, D.
-Zinc Anodizing. 6/98, p. 114Plescia. M.
-Satin Finishing and Surface Preparation, 7/98, p.29
Pollock, M.-Too Hot to Handle. 7/98, p. 8
Purovskaya, O.G.-Electrodeposition of Nickel-Based Alloys with
Tungsten and Molybdenum, 11/98, p. 50Quinn. J.L.
-Using a Blank Coating Process to Reduce Costsand Improve Products, 4/98, p. 10
Qun. Z.L.-Electrodeposition of Zinc-Iron Alloy from an
Alkaline Zincate Bath, 11/98. p. 54Rajagopalan, N.
-Pollution Prevention in an Aluminum GrindingFacility, 11/98, p. 18
Ravindran, V.-Characteristics of an Alkaline Tartrate Zinc Plat•
ing Bath. 10/98, p. 10Reddy, P.B.S.
-Performance Improvement of a Zinc PlatingProcess Using Taguchi's Methodology: ACase Study, 10/98. p. 24
Rezrazi, M.-Adaptation of a Mathematical Model to the In•
corporation of Silicon Carbide Particles inan Electroless Nickel Deposit, 4/98. p. 14
Rieu. J.-Influence of Temperature on the Microstructure
and Properties of Chromium Electrodepos•its. 3/98, p. 52
Rubin, E.-Zinc Anodizing, 6/98, p. 114
Sadtler, T.-Lateral Thinking and Thermometric Titration
Winning Partners in Process Control Analy•. sis. 7/98, p. 20
Sahu, R.P.-Electroless Nickel Plating on Magnesium Alloy.
3/98, p. 10Sarabi. R.S.
-Characteristics of Electrodeposited Nickel fromMixed Organic Solvents, 5/98, p. 26
Saruwatari, K.-Abrasion Resistance of Anodized Coatings on
Aluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester. 10/98, p. 36
Schillereff, D.
-Disposable versus Backwashable Media-TheBottom Line in Filtration. 6/98, p. 90
Sharkey, M.P.-Optical Imaging Has Its Place in the Paint and
Coating Industry, 2/98. p. 69Sharma, A.K.
-Electroless Nickel Plating on Magnesium Alloy.3/98. p. 10
Sheshadri, B.S.-Electrodeposition of Zinc-Cobalt Alloy from an
Alkaline Sulfate Bath Containing Triethano•lamine and Gelatin, 4/98, p. 24
Shoeib. M.A.-Mechanical and Corrosion Protection Properties
of Electroless Nickel-Polymer CompositeCoatings. 11/98, p. 58
Singh. V.B.-Characteristics of Electrodeposited Nickel from
Mixed Organic Solvents, 5/98, p. 26Smith, T.
-Lateral Thinking and Thermometric TitrationWinning Partners in Process Control Analy•sis. 7/98, p. 20
Sokol. A.A.-UV-Curable Paints & Coatings: A Practical Ap•
plication of Quantum Mechanics, 1/98, p. 30Stepanova. L.l.
-Electrodeposition of Nickel-Based Alloys withTungsten and Molybdenum, 11/98, p. 50
Stewart. W.S.-Removal of VOCs from Spent Aerosol Cans.
11/98. p. 12Straka, M.
-A New Approach to Cyanide Analysis. 11/98. p.34
Suresh, M.R.-Electroless Nickel Plating on Magnesium Alloy.
3/98, p. 10Tachez, M.
-Adaptation of a Mathematical Model to the In•corporation of Silicon Carbide Particles inan Electroless Nickel Deposit, 4/98, p. 14
Takaya, M.-Abrasion Resistance of Anodized Coatings on
Aluminum Alloys Tested with an AbrasiveMetal Wheel Wear Tester. 10/98, p. 36
Tang, M.-An Alternative to Anodization: Sol-Gel Solu•
tions for Metal Fipishing, 12/98, p. 35Tao, P.
-Elastic and Electrolytic Ultraprecision Polishing,7/98. p. 22
Thompson. W.E.
-Optimizing Powder Coating Usage by Monitor•ing Film Thickness Consistency. 10/98. p.42
Thorn. R.-Reeingineering the Cyclone Separator. 8/98, p.
30Tulinski, E.H.
-Aqueous Washing Systems. 9/98. p. 46Vicars, S.M.
-Compliance with the Primer and Topcoat MACTStandards of the Aerospace NESHAP atLockheed Martin, 3/98, p. 34
Visan, T.-Analysis of Electrochemical Colored Aluminum
Anodic Films in AgNO, Based Electrolytesby Diffuse Reflectance Spectra, 12/98. p. 10
Wang. R.-Environmental Impact of Zinc Phosphating in
Surface Treatment of Metals, 9/98, p. 54Weidong. L.
-Elastic and Electrolytic U1traprecision Polishing,7/98, p. 22
Wells. J.R.-Coatings Emissions and Relative Ozone Forma•
tion, 4/98, p. 33Weng. D.
-Environmental Impact of Zinc Phosphating inSurface Treatment of Metals, 9/98, p. 54
Wiltkowski. T.-Selective Removal of Chromate Anion by a New
Carbon Adsorbent. 5/98, p. 39Wimmer. W.
-Nickel- and Nitrite-Free Pretreatment of CarBodies. 5/98. p. 16
Wright, J.-An Alternative to Anodization: Sol-Gel Solu•
tions for Metal Finishing, 12/98, p. 35Yao, G.
-Development of Iron Matrix Antifriction Com•posite Coatings. 10/98, p. 16
Yingyan, L.-Elastic and Electrolytic Ultraprecision Polishing,
7/98. p. 22Zhang, G.
-Environmental Impact of Zinc Phosphating inSurface Treatment of Metals, 9/98. p. 54
Zheng. H.-An Alternative to Anodization: Sol-Gel Solu•
tions for Metal Finishing. 12/98, p. 35Zhenlong, W.
-Elastic and Electrolytic Ultraprecision Polishing,7/98. p. 22
Coatings Encyclopedic Dictionaryedited by S. LeSota 391 pages $110.00
This book is an updated and expanded edition of the Paint/Coatings Dictionary. It contains over 6,000definitions, including state-of-the-art technologies as well as regular terminology. One unique featureis a classification of terms into 80 categories such as application methods, additives, color, pigments,and more. The broad scope of terms will make this a valuable reference to chemists, managers, andfinishers.
Send Orders to:METAL FINISHING
660 White Plains Rd., Tarrytown, NY 10591-5153For faster service, call (914) 333-2578or FAX your order to (914) 333-2570
All book orders must be prepaid. Ple-Lo;e include $5.00 shipping and handling for delivery of each book via UPS In the U.S., $10.00 for each book shippedexpress to Canada; and $20.00 for each book shipped expres., to all other countries.
METAL FINISHING • DECEMBER 1998 89