author index - aistbookstore.aist.org/bookcontents/pb-359 3 author index.pdf · robotic solutions...
TRANSCRIPT
Author Index
A |B |C |D |E |F |G |H |I |J |K |L |M |N |O |P |Q |R |S |T |U |V |W |X |Y |Z
Author Index
AReturn to top
Abel, M.
Robotic Solutions for EAF — First Performance Review
Abraham, S.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Improving Centerline Segregation Control on X70 Products
Acosta, F.A.
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
Adams, J.
BOF Gas Cleaning: Second Generation of Dry-type ESP and Hydro Hybrid Filter Technology
Agazzani, D.
Spun Cast Semi-HSS Rolls in Cold Mill Applications
Ageno, M.
Tenova FlexyTech®
Regenerative Flameless Burners
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Aichinger, C.
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
Production
Akamine, K.
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
Alam, M.
A Study on Supersonic Coherent Jet Characteristics Using Computational Fluid Dynamics
Allen, M.
Quench and Tempering: An Unfamiliar Process in North America
Allhands, M.N.
Caster Nozzle Protection
Almeida, L.P.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
file:///D:/Data/html/author_index.html (1 of 53) [12/7/2010 3:42:45 PM]
Author Index
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Alshurafa, K.
Innovative Drop-in Sensor System at Essar Steel Algoma
Altigül, M.C.
Time-based Scheduling System for Steelmaking and Continuous Casting Production
Apfel, J.
Radiation Protection — An Investment for the Future
Aprile, G.
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
Arena, M.
Project Management Models for Long Product Rolling Mills
Arima, T.
Influence of Wall Surface Unevenness on Coke-pushing Force
Aristizábal, R.
Intercritically Austempered Steel
Armstrong, K.A.
Utilizing High Definition 3-D Laser Scanning Technology to Obtain As-built Information to Streamline
Retrofit Improvements
Arribalzaga, P.
Cash for Clunkers in the Reheat Furnace World
Arvedi, G.
Arvedi ESP Endless Strip Production First Thin Slab Endless Casting and Rolling Results
Asam, S.
Innovative Drop-in Sensor System at Essar Steel Algoma
Asante, J.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Improving Centerline Segregation Control on X70 Products
Assar, M.B.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Assis, P.S.
Combustion Rate Evaluation for Tires Blends Considering Their Injection Into the Blast Furnace Tuyeres
New Process and Application for Biogas in Metallurgy
Asth, H.G.
file:///D:/Data/html/author_index.html (2 of 53) [12/7/2010 3:42:45 PM]
Author Index
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Atkinson, F.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Atlija, G.
ArcelorMittal Dofasco No. 2 Blast Furnace Stove Repairs
BReturn to top
Baas, B.
Rotary Seals for Heavy-duty Applications — Technology Meets Customer Requirements
Bachenheimer, S.
Addressing Climate Change — A Novel Greenhouse Gas Carbon Abatement Process (G-CAPTM
) for the
Iron and Steel Industry
Badgley, P.F.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Bai, H.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Ballani, J.
Use of High Chrome Rolls in Cold Mills
Bally, A.
Development of a Validated 3-D Thermal Model for ArcelorMittal Dofasco’s No. 2 Continuous Caster Mold
to Evaluate Design Improvements for High-speed Casting
Bambury, D.
A Targeted Approach to Optimizing a Plate Mill
Barati, M.
Effect of Preheating Temperature on the Melting and Decarburization Behavior of DRI in Steelmaking
Slag
Barel, J.
The Future of Hot Blast Stoves
Barrett, J.O.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Barros, R.S. Assis
Combustion Rate Evaluation for Tires Blends Considering Their Injection Into the Blast Furnace Tuyeres
file:///D:/Data/html/author_index.html (3 of 53) [12/7/2010 3:42:45 PM]
Author Index
Bastos, G.
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Basu, A.J.
Flue Gas Flow Optimization for Energy Efficiency and Clean Operations in Integrated Steel Plants
Batazzi, D.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Battaglia, V.
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Bausch, J.
Near-net-shape Casting of Steel — Belt Casting Technology
Bellicini, F.
Spun Cast Semi-HSS Rolls in Cold Mill Applications
Belous, J.
Clean and Efficient — Optimization of EAF Dedusting Systems
Radiation Protection — An Investment for the Future
Bengier, E.
Study of the Use of Steel Industry Fuel on Coking Operations
Berger, S.
Modernization of Hot Strip Mills — Concepts, Implementations and Results
Bergsma, D.
Proven Practice and Future Prospects of Blast Furnace Reductant Injection
Bernhard, C.
The Nature of Internal Defects in Continuously Cast Steel and Their Impact on Final Product Quality
The Working Group "Continuous Casting: Metallurgy and Materials (M2
CC)" at Leoben University, Austria
Bielich, J.
Study of the Use of Steel Industry Fuel on Coking Operations
Bilkie, R.N.
Productivity Optimization at Duferco Farrell’s 60" Hot Strip Mill
Birkbeck, C.
Electric Arc Furnace Tap Changers
Bishop, M.T.
Line Differential Protection Systems Using Low-power Current Sensors Applied to EAF Circuits
Bispo dos Santos, E.T.
file:///D:/Data/html/author_index.html (4 of 53) [12/7/2010 3:42:45 PM]
Author Index
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Björkman, B.
Avoiding Sloppy BOS Process Behavior
Blankenau, M.R.
Investigation Into an HSM Finishing Stand Defect Which Generated FeO-type Lamination
Bleck, W.
Recent Steel Research at the Department of Ferrous Metallurgy of RWTH Aachen University
Bodden, G.
Advanced and Reliable Drive Systems for the Rolling Mill Industry
Böhm, C.
SIMETAL Corex®
: Prepared For Present and Future Ironmaking Challenges
Boin, N.
Optimization Results at Ferriere Nord Using EFSOP®
Technology
Bolt, P.H.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Bontems, N.
Development of a Validated 3-D Thermal Model for ArcelorMittal Dofasco’s No. 2 Continuous Caster Mold
to Evaluate Design Improvements for High-speed Casting
Born, C.
Heat Recovery for the EAF of Georgsmarienhütte, Germany
Opportunities for Increasing Productivity and Lowering Operating Costs While Reducing GHG Emissions
in Steelmaking
Both, I.
Advanced Technologies for Residue Treatment — Successful Start-up of the PRIMUS®
Plant of Dragon
Steel in Taiwan
Brämming, M.
Avoiding Sloppy BOS Process Behavior
Brandner, M.
Interpretation of UT and EC Results in Roll Testing
Brandolisio, D.
Danieli Maintenance Management System
Briceno, G.
Clean and Efficient — Optimization of EAF Dedusting Systems
file:///D:/Data/html/author_index.html (5 of 53) [12/7/2010 3:42:45 PM]
Author Index
Briglio, S.
Innovative Drop-in Sensor System at Essar Steel Algoma
Production Improvement of No. 2 BOSP at ESAI
Brockhoff, J.
Optimization of Surface Quality Through Mold Thermal Monitoring
Brooks, G.
A Study on Supersonic Coherent Jet Characteristics Using Computational Fluid Dynamics
On-line Monitoring of Ladle Stirring
Brooks, G.A.
Development of a Comprehensive Model for Oxygen Steelmaking
Bruckner, C.
Cost Optimization in the Production of Stainless and Special Steels in the AOD Converter by Using Oxidic
Alloys
Brunelli, R.
Expert 5i—Quality Software Modules in the EPROMI Architecture for Increased Steel Production Efficiency
Brunk, F.
Manufacturing and Characteristics of Modern Silica Brick Material for Coke Ovens
Burdan, R.
Advances in Bearing Reclamation
Burger, R.
Strategies for Flexible Hot Mill Modernizations — Concepts for Modernization and Extension of Hot Strip
Mills
Burnett, C.
In-Process Measurement of Organic Coating Thickness Using a Full Spectrum Infrared Sensor
Butcher, B.
Single Charge EAF Modification: Installation and Experience
CReturn to top
Cameron, I.
Comparison of Byproduct and Heat-Recovery Cokemaking Technologies
Cantrell, V.
Safety and Material Handling
file:///D:/Data/html/author_index.html (6 of 53) [12/7/2010 3:42:45 PM]
Author Index
Capitanio, M.
Totally Controlled Safety System With Zero Impact on Productivity for a Bar Rolling Mill
Capo, J.C.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Carless, S.
Optimization of Surface Quality Through Mold Thermal Monitoring
Carr, J.F.
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Carreau, D.
ArcelorMittal Dofasco No. 2 Blast Furnace Stove Repairs
Castagnola, C.
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
Castillejos, A.H.
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
Casuccio, G.S.
Analysis of Ti-, Mg- and Zr-bearing Inclusions in Ultra-low and Low Carbon Steels
Cates, L.
Improved Temperature Uniformity in Batch Reheat Furnaces With Praxair’s Dilute Oxygen Combustion
(DOC) System
Cavaletti, L.
New Stands for New Duties
Cavinato, E.
"The House of the World’s Longest Billet" The New Micromill Danieli (MI.DA®
) at CMC Steel Arizona: An
Innovative Process for the Most Competitive Production of Rebar Product
Cecutti, R.
The 750,000 Stpy SBQ Rolling Mill, Part of the Complete Minimill at Nucor Steel Memphis Inc., USA
Ceriani, A.
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
Chairaksa, R.
New Zinc Recovery Process From EAF Dust by Lime Addition
Chakraborty, S.
Raw Materials for the Blast Furnace
Chang, J.-M.
A New Architecture of Control and Operation Information System — PRM in the New Campaign of a
file:///D:/Data/html/author_index.html (7 of 53) [12/7/2010 3:42:45 PM]
Author Index
Blast Furnace
Chattopadhyay, K.
Effect of Ladle Shroud Alignment on Steel Quality in a 4-strand Delta-shaped Tundish
Chen, L.
Mechanical Properties and Development of Hot-dip Coated Solid Solution Strengthened Low Carbon
Steels for Automobiles
Chen, M.-H.
Improvement of the Periodical Mold Level Fluctuation in a Slab Caster and Relevant Sliver Defects on
Hot-rolled Coils
Chen, N.
Numerical Investigation and Optimization of a Venturi Scrubber
Chen, S.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Chen, X.
Improving Centerline Segregation Control on X70 Products
Cheng, G.
Mechanical Properties and Development of Hot-dip Coated Solid Solution Strengthened Low Carbon
Steels for Automobiles
Cheng, T.-C.
Improvement of the Periodical Mold Level Fluctuation in a Slab Caster and Relevant Sliver Defects on
Hot-rolled Coils
Cho, M.J.
Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters
Chowdhary, D.M.
An Industrial Power System Management for High-quality Uninterrupted Power Supply at Tata Steel
Cirelli, R.
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
Clark, C.
JSW Steel No. 3 Blast Furnace: An Introduction to India’s Largest Blast Furnace
Clerici, P.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
Colaneri, P.
Increasing Casting Speed Without Mold Level Hunting Risk Using Switching Control
file:///D:/Data/html/author_index.html (8 of 53) [12/7/2010 3:42:45 PM]
Author Index
Cook, A.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Coombes, T.M.
A Method for Roll Alignment by Means of Inertial Technology Using PARALIGN®
Corbari, R.
Thermodynamic Modeling to Improve Foamy Slag Practice in the EAF
Costa, A.F.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Costa, A.L.
Adding Value to the Hot Rolled Coil Business at Burns Harbor by Reducing the Number of Unplanned Roll
Changes While Sharing Technical Experiences on the ArcelorMittal Group
Cotchen, J.K.
Degassing 101
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Operating Principle and Plant Design of the VD/VOD Facility at ThyssenKrupp Acciai Speciali Terni (TK
AST) for the Production of Superferritic Stainless Steel
Cox, J.A.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Craig, I.M.
The Gimbal Top Goes On-line, A New Era for Blast Furnace Charging
Cruz, G.J.
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Cryderman, R.L.
Effects of Continuous Cast Section Size on the Torsional Fatigue of 1050 Steel
DReturn to top
D’Alessio, J.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
D’Souza, C.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Improving Centerline Segregation Control on X70 Products
Da Silva, C.A.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
file:///D:/Data/html/author_index.html (9 of 53) [12/7/2010 3:42:45 PM]
Author Index
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Da Silva, I.A.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Da Silva Júnior, R.A.
New Process and Application for Biogas in Metallurgy
DaRocha, R.
Cash for Clunkers in the Reheat Furnace World
Dahlblom, M.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
Damazio, M.A.
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Damoah, L.N.W.
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Dan, Z.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Dankwah, J.R.
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Davis, O.
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
Day, T.R.
Line Differential Protection Systems Using Low-power Current Sensors Applied to EAF Circuits
De Oliveira Moreira, A.L.
New Process and Application for Biogas in Metallurgy
Del Re, L.
Increasing Casting Speed Without Mold Level Hunting Risk Using Switching Control
DeCarli, M.A.
Hybrid DC-DC-AC Main Drive for ILVA, Taranto Finishing Mill
DeMar, S.
file:///D:/Data/html/author_index.html (10 of 53) [12/7/2010 3:42:45 PM]
Author Index
Descale System Design
Dejiang, P.
Reducing Refractory Cost Using New Al2O3-SiC-C Bricks for Hot Iron Transport
Deka, M.
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Della Rocca, A.
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Dentella, F.
Oxygen-Enhanced Ladle Preheating Systems: Improved Tap-to-tap Cycle Time and Operating Cost
Reductions
Derflinger, F.
Slab Caster Revamping—The Approach to Excel in the Market
Derijcke, M.
Shape Improvement in Cut-to-length Line With an In-line Quarto Skinpass Mill
Devorich, S.
Improving the Galvanizing Process — Electromagnetic Strip Stabilization and Complementary Solutions:
eMASS, eWIPE, eBACS
Dickert, H.H.
Recent Steel Research at the Department of Ferrous Metallurgy of RWTH Aachen University
Diestel, M.
Optimized Material Flow in Plate Plants by Integration of Scheduling and Warehouse Management
Dillon, E.
Correlation Between F-value and Sliver Index for Ultra-low Carbon Steel Grades at ArcelorMittal
Dofasco’s No. 1 Continuous Caster
Dimitrov, S.
Cost Optimization in the Production of Stainless and Special Steels in the AOD Converter by Using Oxidic
Alloys
Dittmer, B.
Asymmetrical Power Control of AC-EAFs by Structure-borne Sound Evaluation
Dixon, J.
Correlation Between F-value and Sliver Index for Ultra-low Carbon Steel Grades at ArcelorMittal
Dofasco’s No. 1 Continuous Caster
Döbbeler, A.
Asymmetrical Power Control of AC-EAFs by Structure-borne Sound Evaluation
Dogan, N.
file:///D:/Data/html/author_index.html (11 of 53) [12/7/2010 3:42:45 PM]
Author Index
Development of a Comprehensive Model for Oxygen Steelmaking
Doleman, B.
Brick Rubble Removal From the Base of an On-line Battery Stack at ArcelorMittal Dofasco
Döll, R.
Modern Process Models to Improve Product Quality on Plate Mills
Dombrowski, S.
Improving the Galvanizing Process — Electromagnetic Strip Stabilization and Complementary Solutions:
eMASS, eWIPE, eBACS
Dong, A.
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Doninger, T.
Clean and Efficient — Optimization of EAF Dedusting Systems
Radiation Protection — An Investment for the Future
Dou, Z.
Study on the Influence of Secondary Cooling Water Coverage Area of Bloom Surface on Cooling Effect in
Continuous Casting of Gearing Steel
Druschitz, A.P.
Intercritically Austempered Steel
Duarte, P.E.
Achieving Carbon-free Emissions via the ENERGIRON DR Process
Dunnett, K.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Improving Centerline Segregation Control on X70 Products
Dupuis, C.
Pre-start Health and Safety Review (PSR) — A Third-Party Independent Review Conducted at the Start
of the Project in Preparation for Certification Upon Conclusion
Dutta, V.B.
Flue Gas Flow Optimization for Energy Efficiency and Clean Operations in Integrated Steel Plants
Dyer, M.S.
Microalloy Precipitation in Hot Charged Slabs
EReturn to top
Eden, M.
file:///D:/Data/html/author_index.html (12 of 53) [12/7/2010 3:42:45 PM]
Author Index
JSW Steel No. 3 Blast Furnace: An Introduction to India’s Largest Blast Furnace
Ehlert, D.
Modernization of the Heavy-plate Rolling Mill at Dongkuk
Eichert, T.
Operating Principle and Plant Design of the VD/VOD Facility at ThyssenKrupp Acciai Speciali Terni (TK
AST) for the Production of Superferritic Stainless Steel
Eklund, N.
Characterization of the State of LKAB Experimental BF Hearth
Elnenaey, A.
Analysis of Edge Buildup on Aluminized Steel Strip Using Computational Fluid Dynamics (CFD) and
Metallography
Els, J.
Ironmaking Technology Selection for Site-specific Conditions
Emi, T.
Inauguration of IRIS, Institute of Research of Iron and Steel, for Sha Steel in China
Engel, K.
Slab Caster Revamping—The Approach to Excel in the Market
Eriksson, J.-E.
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
Water Modeling of Stirring and Braking Processes in a Slab Caster Mold
Ester, H.
BOF Gas Cleaning: Second Generation of Dry-type ESP and Hydro Hybrid Filter Technology
FReturn to top
Fabbro, C.
The UGR Process: The Danieli Innovative Process for a Low-cost Production of Seismic Concrete
Reinforcement Steel
Fabiola, F.
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
Fabro, M.
New Stands for New Duties
Faci, H.
Factors to Consider in the Selection of a Mill Grease
file:///D:/Data/html/author_index.html (13 of 53) [12/7/2010 3:42:45 PM]
Author Index
Falkenreck, U.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Fan, J.
Mechanical Study for Reducing Shell/Core Bond Separation of Duplex Cast Work Rolls for a Hot Strip Mill
Fantuzzi, M.
Tenova FlexyTech®
Regenerative Flameless Burners
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Faraji, M.
Rating Inclusions in an As-cast Carbon Steel
Fash, R.E.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Feese, J.
Ultra Low-NOx Flat Flame Burner Application for Steel Reheat Furnaces
Fehringer, E.
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
Production
Feilmayr, C.
CFD Simulation of Co-injection of Plastic Particles and Oil Into a Blast Furnace Raceway
Feiste, K.L.
A Non-Destructive Inspection System for Measuring Mechanical-technological Properties of Steel Grades
Fenandez, H.
Spun Cast Semi-HSS Rolls in Cold Mill Applications
Fennell, A.G.
Steel Mills: Energy Costs and the Green Planet
Ferron, K.J.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Filipczyk, W.
Quality Performance Report Improves Mill Operation
Findley, K.O.
Microstructure and Mechanical Properties Comparison of Direct Quenched vs. Reaustenitized and
Quenched Plate
Finstermann, G.
SIROLL CM-upgrading of Cold Rolling Tandem Mills to Continuous Operation
Fisher, C.
Revamping MES and L3 Systems in the Iron and Steel Industry
file:///D:/Data/html/author_index.html (14 of 53) [12/7/2010 3:42:45 PM]
Author Index
Fletcher, M.
Don’t Let Your Money Go Up the Chimney
Forman, B.R.
Optimization of a Submerged Entry Nozzle Design to Reduce Nonmetallic Inclusions in Line Pipe Steel
Fornasier, M.
Staying Ahead of the Curve — Beating the Commissioning Schedule for Continuous Slab Casters
Fox, N.
Strategic Demolition Impact Analysis — A Plan for Aging Infrastructure
Francis, W.P.
Tuyere Life Improvements and Operating Enhancements on Great Lakes B-2 Blast Furnace
Franco, G.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Improving Centerline Segregation Control on X70 Products
Franco, P.
Staying Ahead of the Curve — Beating the Commissioning Schedule for Continuous Slab Casters
Franz, J.R.
Automated Material Tracking via RFID Technologies
Frascarelli, R.A.
Running Your Maintenance Department as a Business
Freislich, M.
Addressing Climate Change — A Novel Greenhouse Gas Carbon Abatement Process (G-CAPTM
) for the
Iron and Steel Industry
Ironmaking Technology Selection for Site-specific Conditions
Freitas Pipano, T.
New Process and Application for Biogas in Metallurgy
Fu, D.
Burden Descending and Redistribution in a Blast Furnace
Fu, Z.
Vapor Pressure Measurements of Zinc and Lead Chlorides From Slag System
Fuchs, H.
EAF Optimization: Efficient Use of Energy in the Electric Arc Furnace
Fuchs, W.
Modernization of Hot Strip Mills — Concepts, Implementations and Results
Fukuda, K.
file:///D:/Data/html/author_index.html (15 of 53) [12/7/2010 3:42:45 PM]
Author Index
Influence of Wall Surface Unevenness on Coke-pushing Force
Fulgencio, A.
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
Production
GReturn to top
Gabriel, W.V.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
Galbiati, P.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Galpin, A.T.
Your Employees Use Fall Protection, But Are They Really Safe From Harm?
Gao, T.
Advanced Inside-furnace Monitoring Techniques Implemented on the New Large Blast Furnace of
Shagang
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Gao, Z.
Advanced Inside-furnace Monitoring Techniques Implemented on the New Large Blast Furnace of
Shagang
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Gaspard, C.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Gauvreau, R.P.
Easy Access to Everything — Or How the Web Can Bring It All Together
Geerdes, M.
Low-cost Hot Metal: The Future of Blast Furnace Ironmaking
Gehle, R.
New Developments in Drive Trains for Roughing and Plate Mills
Gerhan, R.E.
Secondary System Mechanical Resonance in New Tall-shell SDI-Butler Arc Furnaces: Detection and
Solutions
file:///D:/Data/html/author_index.html (16 of 53) [12/7/2010 3:42:45 PM]
Author Index
Ghanbari, H.
Analysis of the Economy and Emissions of Blast Furnace Operation With Top Gas Recycling
Giavani, C.
Start-up and Results of the EAF Consteel®
Plant of Celsa Nordic — Mo I Rana (Norway)
Gil, R.
AHMSA’s Blast Furnace No. 4 Operation with Low-grade Raw Materials for Highest Productivity
Gillgrass, S.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Giordano, A.
Hybrid DC-DC-AC Main Drive for ILVA, Taranto Finishing Mill
Giroux, L.
Direct Injection of Biofuel in Blast Furnace Ironmaking
Reduction of Blast Furnace Ironmaking Carbon Footprint Through Process Integration
Giugliano, P.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Glodowski, R.J.
Fine Grain Practice—Revisited
Production of Fine Grained As-rolled Structural Plate Steels
Gocan, O.
PLTCM Network Topologies
Gonzalez, F.R.
Adding Value to the Hot Rolled Coil Business at Burns Harbor by Reducing the Number of Unplanned Roll
Changes While Sharing Technical Experiences on the ArcelorMittal Group
Goodwin, F.E.
Numerical Investigation of Air Knives with Multiple-impinging Slot Jets in Continuous Hot-dip Galvanizing
Goodwin, T.
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
Gordon, Y.
Comparison of Byproduct and Heat-Recovery Cokemaking Technologies
Ironmaking Technology Selection for Site-specific Conditions
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Gori, L.
The 750,000 Stpy SBQ Rolling Mill, Part of the Complete Minimill at Nucor Steel Memphis Inc., USA
file:///D:/Data/html/author_index.html (17 of 53) [12/7/2010 3:42:45 PM]
Author Index
Gottardi, R.
Steel Degassing Operations Using Mechanical Vacuum Pump Systems
Granderath, R.
Heat Recovery for the EAF of Georgsmarienhütte, Germany
Grasser, G.
SIROLL HM Work Roll Lubrication for Electrical Energy Reduction and Strip Surface Improvement
Greaves, M.
Novel Polyalkylene Glycol Based Hydraulic Fluids
Grill, W.
SIMETAL Corex®
: Prepared For Present and Future Ironmaking Challenges
Grob, S.
Cast in Time and Quality: Energy Savings Through Integrated Heat Temperature Forecast and
Scheduling Model
Grundy, A.N.
Mold Technology for the Future
Grzyb, J.
A Targeted Approach to Optimizing a Plate Mill
Grünbaum, R.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
Gstöttenbauer, N.
A Non-Destructive Inspection System for Measuring Mechanical-technological Properties of Steel Grades
Günther, H.-W.
Requirements on Standard Tests of Radial Shafts Seals for the Heavy Industry
Gupta, N.
Analysis of Ti-, Mg- and Zr-bearing Inclusions in Ultra-low and Low Carbon Steels
Gupta, S.
Effect of Blending Rangal Coal on High-temperature Behavior of Cokes
Gurley, G.
Water Treatment Chemistry Impact on CSP Mill Product Quality and Production Rate
Gushiken, J.I.
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Guthrie, R.I.L.
Effect of Ladle Shroud Alignment on Steel Quality in a 4-strand Delta-shaped Tundish
The McGill Metals Processing Center: A University-Industry Partnership for Process Metallurgy
file:///D:/Data/html/author_index.html (18 of 53) [12/7/2010 3:42:45 PM]
Author Index
Guzzon, M.
Start-up and Results of the EAF Consteel®
Plant of Celsa Nordic — Mo I Rana (Norway)
HReturn to top
Hackl, H.
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
Hackmann, J.
Optimized Material Flow in Plate Plants by Integration of Scheduling and Warehouse Management
Haglund, A.
Intercritically Austempered Steel
Hansen, R.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Hansert, P.
Radiation Protection — An Investment for the Future
Harand, B.
In-Process Measurement of Organic Coating Thickness Using a Full Spectrum Infrared Sensor
Harasek, M.
CFD Simulation of Co-injection of Plastic Particles and Oil Into a Blast Furnace Raceway
Hartig, W.
Operation Results of the New Waste Gas Treatment Facility at ROGESA’s No. 2 Sinterplant — the EFATM
Process
Hasler, J.-P.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
Haslinger, M.
Slab Caster Revamping—The Approach to Excel in the Market
Hatcher, J.L.
Water Treatment Chemistry Impact on CSP Mill Product Quality and Production Rate
Hauge, J.
A Lean Supply Chain Manufacturing Model
He, Q.
Study on the Influence of Secondary Cooling Water Coverage Area of Bloom Surface on Cooling Effect in
Continuous Casting of Gearing Steel
file:///D:/Data/html/author_index.html (19 of 53) [12/7/2010 3:42:45 PM]
Author Index
Hecken, H.-J.
Near-net-shape Casting of Steel — Belt Casting Technology
Heesen, M.
Cast in Time and Quality: Energy Savings Through Integrated Heat Temperature Forecast and
Scheduling Model
Hein, M.
Robotic Solutions for EAF — First Performance Review
Helinski, T.
Study of the Use of Steel Industry Fuel on Coking Operations
Helle, H.
Analysis of the Economy and Emissions of Blast Furnace Operation With Top Gas Recycling
Helle, M.
Analysis of the Economy and Emissions of Blast Furnace Operation With Top Gas Recycling
Henning, H.
Optimized Material Flow in Plate Plants by Integration of Scheduling and Warehouse Management
Hequet, R.
Shape Improvement in Cut-to-length Line With an In-line Quarto Skinpass Mill
Hernández, C.A.
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
Hessling, G.
Recent Steel Research at the Department of Ferrous Metallurgy of RWTH Aachen University
Hiraki, T.
New Zinc Recovery Process From EAF Dust by Lime Addition
Ho, C.-K.
Investigation of Related Factors of Blast Furnace Slag Fluidity and Its Application
Hoen, K.
Fit for the Future by Modernization — Latest Solutions for Tandem Cold Mills
Hogenschurz, M.
Mold Technology for the Future
Hohenbichler, G.
Arvedi ESP Endless Strip Production First Thin Slab Endless Casting and Rolling Results
Holleis, G.
Arvedi ESP Endless Strip Production First Thin Slab Endless Casting and Rolling Results
Holz, R.
Fit for the Future by Modernization — Latest Solutions for Tandem Cold Mills
file:///D:/Data/html/author_index.html (20 of 53) [12/7/2010 3:42:45 PM]
Author Index
Honda, T.
Quality Improvement in Bloom for SBC Steel
Hope, C.
Expert 5i—Quality Software Modules in the EPROMI Architecture for Increased Steel Production Efficiency
Horan, E.P.
Productivity Optimization at Duferco Farrell’s 60" Hot Strip Mill
Hötzinger, S.
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
Production
Houbart, M.
Advanced Technologies for Residue Treatment — Successful Start-up of the PRIMUS®
Plant of Dragon
Steel in Taiwan
Hovestaedt, E.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Hrymak, A.N.
Numerical Investigation of Air Knives with Multiple-impinging Slot Jets in Continuous Hot-dip Galvanizing
Hu, Y.
Development of a Virtual Reality Blast Furnace Package Using CFD
Huang, C.-Y.
Development of Nano-size Precipitation Strengthening Hot-rolled Automobile Steels
Huang, F.
Burden Descending and Redistribution in a Blast Furnace
Huang, K.-W.
Improvement of the Periodical Mold Level Fluctuation in a Slab Caster and Relevant Sliver Defects on
Hot-rolled Coils
Huck, M.
Robotic Solutions for EAF — First Performance Review
Hughes, P.
Description of a Simulation Method for Evaluating the Thermal Properties of Insulation Materials Used on
an Evaporative Skid Cooling System in Reheat Furnaces
Hung, C.-H.
Improvement of the Periodical Mold Level Fluctuation in a Slab Caster and Relevant Sliver Defects on
Hot-rolled Coils
file:///D:/Data/html/author_index.html (21 of 53) [12/7/2010 3:42:45 PM]
Author Index
IReturn to top
Iacuzzi, M.
Oxygen/Carbon Injection System at Charter Steel Cleveland Facility, Project Description and Operational
Results
Idesako, T.
Improvement of Wire Rods Processing Technology
Inns, M.
Maximized Asset Reliability and Performance Connected to PDA Inspection
Inoue, Y.
New Zinc Recovery Process From EAF Dust by Lime Addition
Irons, G.A.
Numerical Modeling of Scrap Heating by Burners
The McMaster Steel Research Center: A Model for Industry-University Collaboration
Isac, M.
Effect of Ladle Shroud Alignment on Steel Quality in a 4-strand Delta-shaped Tundish
The McGill Metals Processing Center: A University-Industry Partnership for Process Metallurgy
Ishigaki, Y.
Simulation of Strip Lateral Dynamics on Continuous Processing Lines
JReturn to top
Jansto, S.G.
Effect of Melting and Casting Parameters on the Hot Ductility Behavior of Nb-bearing Beams, Billets and
Slabs
Microalloy Precipitation in Hot Charged Slabs
Jeloka, R.
An Industrial Power System Management for High-quality Uninterrupted Power Supply at Tata Steel
Jeong, Y.-S.
Recovery of Phosphorus and Manganese From Steelmaking Slag
Jetkiewcz, J.
Formation of an Impromptu EAF Process Team at CMC Steel Texas
Jin, L.
Development of a Virtual Reality Blast Furnace Package Using CFD
file:///D:/Data/html/author_index.html (22 of 53) [12/7/2010 3:42:45 PM]
Author Index
Jipnang, E.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Johnson, K.W.
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Johnston, M.D.
Effect of Preheating Temperature on the Melting and Decarburization Behavior of DRI in Steelmaking
Slag
Jones, B.
Hybrid DC-DC-AC Main Drive for ILVA, Taranto Finishing Mill
Jones, J.A.T.
New Approaches to Meltshop Offgas Heat Recovery
Optimization of Offgas System Performance at Hamilton Specialty Bar
Jordan, A.
Improving the Galvanizing Process — Electromagnetic Strip Stabilization and Complementary Solutions:
eMASS, eWIPE, eBACS
Jordan, C.
CFD Simulation of Co-injection of Plastic Particles and Oil Into a Blast Furnace Raceway
Joshi, P.P.
Utilization of Non-DR Grade/BF Grade Low-Fe Pellets for Direct Reduction and Melting Application
Jung, E.
New Developments in Drive Trains for Roughing and Plate Mills
Jung, I.-H.
Thermodynamic Modeling of the CaF2-Containing Slags and Its Applications to Steelmaking Process
Jungbauerl, A.
Arvedi ESP Endless Strip Production First Thin Slab Endless Casting and Rolling Results
KReturn to top
Kabeya, K.
Simulation of Strip Lateral Dynamics on Continuous Processing Lines
Kaguchi, N.
The Sophisticated Air Mist Nozzle for Secondary Cooling of the Continuous Caster
Kajitani, T.
Experimental Study on Heat Transfer Behavior Through the Mold Flux Film Between the Solidifying Shell
file:///D:/Data/html/author_index.html (23 of 53) [12/7/2010 3:42:45 PM]
Author Index
and Mold
Kamperman, A.
Optimization of Surface Quality Through Mold Thermal Monitoring
Kan, M.
Thermodynamic Modeling to Improve Foamy Slag Practice in the EAF
Kaneko, D.
Quality Improvement in Bloom for SBC Steel
Kapaj, N.
One Year Casting Experience for Rounds of High-quality Steel Grades at Nucor Memphis
Kar, A.
An Industrial Power System Management for High-quality Uninterrupted Power Supply at Tata Steel
Kasalo, J.
Waste Gas Cooling Plants with Evaporation Cooling
Kato, K.
Influence of Wall Surface Unevenness on Coke-pushing Force
Kawa, F.
Mold Technology for the Future
Kayama, T.
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
Keiji, K.
New Electrolytic Tinning Line and Tin-free Steel Line for BAOSTEEL, China
Kekeç, S.
Time-based Scheduling System for Steelmaking and Continuous Casting Production
Keller, K.
"The House of the World’s Longest Billet" The New Micromill Danieli (MI.DA®
) at CMC Steel Arizona: An
Innovative Process for the Most Competitive Production of Rebar Product
Kelly, J.
Oxygen-Enhanced Ladle Preheating Systems: Improved Tap-to-tap Cycle Time and Operating Cost
Reductions
Khan, M.
Optimization Results at Ferriere Nord Using EFSOP®
Technology
Khanna, R.
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
file:///D:/Data/html/author_index.html (24 of 53) [12/7/2010 3:42:45 PM]
Author IndexKhemchandani, G.
Novel Polyalkylene Glycol Based Hydraulic Fluids
Kim, B.-C.
Effect of Blending Rangal Coal on High-temperature Behavior of Cokes
King, P.D.
Slidegate Mythology
Kitamura, S.-Y.
Influence of Plume Eye Area on Surface Reaction Rate of Oxygen-water System Under Bottom Bubbling
Condition
Kleimt, B.
Cast in Time and Quality: Energy Savings Through Integrated Heat Temperature Forecast and
Scheduling Model
Knaphus, K.
Maximized Asset Reliability and Performance Connected to PDA Inspection
Knights, D.
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Knoth, V.
Clean and Efficient — Optimization of EAF Dedusting Systems
Koch, A.
Requirements on Standard Tests of Radial Shafts Seals for the Heavy Industry
Rotary Seals for Heavy-duty Applications — Technology Meets Customer Requirements
Kochanski, U.
Manufacturing and Characteristics of Modern Silica Brick Material for Coke Ovens
Koehler, T.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Kojovic, L.
Line Differential Protection Systems Using Low-power Current Sensors Applied to EAF Circuits
Kongkarat, S.
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Kopfle, J.T.
Environmental Benefits of Natural Gas Direct Reduction
Koshy, P.
file:///D:/Data/html/author_index.html (25 of 53) [12/7/2010 3:42:45 PM]
Author Index
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Kostrubsky, O.V.
Investigation Into an HSM Finishing Stand Defect Which Generated FeO-type Lamination
Koubek, C.
The ArCOS Furnace Automation Concept — Much More Than a Simple Electrode Control System
Kozak, B.
Technological Upgrades of Slab Casting Plants: The Danieli Davy Distington Experience for Plant
Renovations and Performance Improvements
Kozak, B.A.
Staying Ahead of the Curve — Beating the Commissioning Schedule for Continuous Slab Casters
Krämer, S.
Modernization of Hot Strip Mills — Concepts, Implementations and Results
Krieg, E.
New Stands for New Duties
Krotov, Y.
Secondary System Mechanical Resonance in New Tall-shell SDI-Butler Arc Furnaces: Detection and
Solutions
Single Charge EAF Modification: Installation and Experience
Krump, R.
The ArCOS Furnace Automation Concept — Much More Than a Simple Electrode Control System
Krüger, K.
Asymmetrical Power Control of AC-EAFs by Structure-borne Sound Evaluation
Kubo, H.
Recovery of Phosphorus and Manganese From Steelmaking Slag
Kubori, S.
The Sophisticated Air Mist Nozzle for Secondary Cooling of the Continuous Caster
Kumar, A.
Fault Tolerant SVC ArcComp System for DC Arc Furnaces
Kumar, S.
Addressing Climate Change — A Novel Greenhouse Gas Carbon Abatement Process (G-CAPTM
) for the
Iron and Steel Industry
Kündig, B.
Mold Technology for the Future
file:///D:/Data/html/author_index.html (26 of 53) [12/7/2010 3:42:45 PM]
Author Index
Kundrat, D.
EAF Optimization: Efficient Use of Energy in the Electric Arc Furnace
Kunin, I.
Optimized Material Flow in Plate Plants by Integration of Scheduling and Warehouse Management
Kurasako, S.
Quality Improvement in Bloom for SBC Steel
Kureck, A.S.
AC Variable Frequency Drive with Static Stepless Simulation Software Outperforms Traditional Static
Stepless Crane Control
Kurosky, J.
Maximized Asset Reliability and Performance Connected to PDA Inspection
LReturn to top
La Bruna, E.
Revamping MES and L3 Systems in the Iron and Steel Industry
Lagae, P.
Revamping MES and L3 Systems in the Iron and Steel Industry
Lainati, A.
Project Management Models for Long Product Rolling Mills
Landi, A.
Tenova FlexyTech®
Regenerative Flameless Burners
Landy, M.
SIROLL CM-upgrading of Cold Rolling Tandem Mills to Continuous Operation
The Plate Mill as a Metallurgical Tool
Laroy, B.
Single Charge EAF Modification: Installation and Experience
Larsson, T.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
Lazuardi, F.
Influence of Plume Eye Area on Surface Reaction Rate of Oxygen-water System Under Bottom Bubbling
Condition
Lee, J.
The Plate Mill as a Metallurgical Tool
file:///D:/Data/html/author_index.html (27 of 53) [12/7/2010 3:42:45 PM]
Author Index
Lee, S.M.
Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters
Leng, X.
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
Lester, J.
Technological Upgrades of Slab Casting Plants: The Danieli Davy Distington Experience for Plant
Renovations and Performance Improvements
Levick, M.
Mechanical Study for Reducing Shell/Core Bond Separation of Duplex Cast Work Rolls for a Hot Strip Mill
Li, B.
Developments on a Web-based Metal Technology and Metal Information Network
Mill Level 2 Model in Improvement of Product Quality and Productivity
Li, D.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Li, S.
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Vapor Pressure Measurements of Zinc and Lead Chlorides From Slag System
Li, Y.
Quick Direct Tap at United States Steel Corporation’s Gary Works Q-BOP Shop
Liceaga, F.
30 Million Tonnes in the Hearth of Blast Furnace No. 5 at AHMSA Mexico
Lin, P.-H.
Thermal Efficiency Optimization of the Hot Stove System
Lisin, F.
Ultra Low-NOx Flat Flame Burner Application for Steel Reheat Furnaces
Liu, B.
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
Liu, J.
Advanced Inside-furnace Monitoring Techniques Implemented on the New Large Blast Furnace of
Shagang
Liu, Q.
Study on the Influence of Secondary Cooling Water Coverage Area of Bloom Surface on Cooling Effect in
Continuous Casting of Gearing Steel
Liu, S.-H.
file:///D:/Data/html/author_index.html (28 of 53) [12/7/2010 3:42:45 PM]
Author Index
Investigation of Related Factors of Blast Furnace Slag Fluidity and Its Application
Liu, Y.
Mechanical Study for Reducing Shell/Core Bond Separation of Duplex Cast Work Rolls for a Hot Strip Mill
Loss, H.B.
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Losso, P.
"The House of the World’s Longest Billet" The New Micromill Danieli (MI.DA®
) at CMC Steel Arizona: An
Innovative Process for the Most Competitive Production of Rebar Product
Lu, D.
Numerical Investigation and Optimization of a Venturi Scrubber
Lugo, N.
Secondary System Mechanical Resonance in New Tall-shell SDI-Butler Arc Furnaces: Detection and
Solutions
Lundberg, S.-E.
Quenched and Self-tempered Rebar — Process Overview, Layouts, Operational Parameters and Cost
Savings
MReturn to top
Ma, T.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
MacPhee, T.
Direct Injection of Biofuel in Blast Furnace Ironmaking
Reduction of Blast Furnace Ironmaking Carbon Footprint Through Process Integration
MacRae, A.
Eddy-free Tuyeres for a Blast Furnace
Maestrutti, L.
The 750,000 Stpy SBQ Rolling Mill, Part of the Complete Minimill at Nucor Steel Memphis Inc., USA
Maggioni, V.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
Mahapatro, M.
Mitigation of Triboelectric Charging in Industrial Hydraulic and Lubricating Fluids — Case Studies in the
Primary Metals Market Segment
file:///D:/Data/html/author_index.html (29 of 53) [12/7/2010 3:42:45 PM]
Author Index
Mahoney, W.J.
Experimental Remarks on Supersonic Jet Behavior in High-temperature, Reactive Ambient in Connection
to Steelmaking
Maiolo, J.
Opportunities for Increasing Productivity and Lowering Operating Costs While Reducing GHG Emissions
in Steelmaking
Malan, W.
New Developments in Drive Trains for Roughing and Plate Mills
Malfa, E.
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Mandal, K.
Numerical Modeling of Scrap Heating by Burners
Mansur, F.
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Marcuzzi, S.
Oxygen/Carbon Injection System at Charter Steel Cleveland Facility, Project Description and Operational
Results
Mario, S.
HSS Work Rolls for Hot Mill Finishing Stands: Keys to Success
Marquez, J.
Maximized Asset Reliability and Performance Connected to PDA Inspection
Martin, P.M.
Don’t Let Your Money Go Up the Chimney
Martin, S.
A Targeted Approach to Optimizing a Plate Mill
Martins, F.M.
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Martins, M.E.
New Process and Application for Biogas in Metallurgy
Maruoka, N.
Influence of Plume Eye Area on Surface Reaction Rate of Oxygen-water System Under Bottom Bubbling
Condition
Marzec, G.
A Lean Supply Chain Manufacturing Model
file:///D:/Data/html/author_index.html (30 of 53) [12/7/2010 3:42:45 PM]
Author Index
Masaaki, H.
The Mill Revamping of Chubu Steel Plate
Mata, R.
30 Million Tonnes in the Hearth of Blast Furnace No. 5 at AHMSA Mexico
Matlock, D.K.
Microalloy Precipitation in Hot Charged Slabs
Matschullat, T.
Asymmetrical Power Control of AC-EAFs by Structure-borne Sound Evaluation
Matson, S.
Formation of an Impromptu EAF Process Team at CMC Steel Texas
Optimization of Offgas System Performance at Hamilton Specialty Bar
Matsubae-Yokoyama, K.
New Zinc Recovery Process From EAF Dust by Lime Addition
Recovery of Phosphorus and Manganese From Steelmaking Slag
Maurice, T.
Brick Rubble Removal From the Base of an On-line Battery Stack at ArcelorMittal Dofasco
Mayrosh, T.M.
Adding Value to the Hot Rolled Coil Business at Burns Harbor by Reducing the Number of Unplanned Roll
Changes While Sharing Technical Experiences on the ArcelorMittal Group
Mazzolari, F.
Arvedi ESP Endless Strip Production First Thin Slab Endless Casting and Rolling Results
McCabe, R.
United States Steel Corporation Fairfield Works Coal Grinding Facility
McDermid, J.R.
Numerical Investigation of Air Knives with Multiple-impinging Slot Jets in Continuous Hot-dip Galvanizing
McDonald, M.W.
Taking Batch Annealing Optimization to the Next Level
McGee, M.
Optimizing Indirect Production Cost
McGrath, M.C.
Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-rolled Fe-Mn-Al-Si-C Steel
McKnight, S.J.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Study of the Use of Steel Industry Fuel on Coking Operations
file:///D:/Data/html/author_index.html (31 of 53) [12/7/2010 3:42:45 PM]
Author IndexMcMillen, J.
Quality Performance Report Improves Mill Operation
Mecozzi, M.
Revamping MES and L3 Systems in the Iron and Steel Industry
Mehlich, F.
Modernization of the Heavy-plate Rolling Mill at Dongkuk
Mellander, W.E.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Memoli, F.
Heat Recovery for the EAF of Georgsmarienhütte, Germany
Meng, L.
Study on the Influence of Secondary Cooling Water Coverage Area of Bloom Surface on Cooling Effect in
Continuous Casting of Gearing Steel
Metius, G.E.
Environmental Benefits of Natural Gas Direct Reduction
Meyer, S.
Single Charge EAF Modification: Installation and Experience
Meyn, M.
BOF Gas Cleaning: Second Generation of Dry-type ESP and Hydro Hybrid Filter Technology
Miani, S.
Steel Degassing Operations Using Mechanical Vacuum Pump Systems
Michelic, S.C.
The Working Group "Continuous Casting: Metallurgy and Materials (M2
CC)" at Leoben University, Austria
Miclo, E.
Oxygen-Enhanced Ladle Preheating Systems: Improved Tap-to-tap Cycle Time and Operating Cost
Reductions
Middleton, J.R.
High-impact Computer Integrated Meltshop Management Systems — Effective Implementation with
Sustained Success
Mikie, T.
The Mill Revamping of Chubu Steel Plate
Mineta, S.
Experimental Study on Heat Transfer Behavior Through the Mold Flux Film Between the Solidifying Shell
and Mold
Missio, M.
Optimization Results at Ferriere Nord Using EFSOP®
Technology
file:///D:/Data/html/author_index.html (32 of 53) [12/7/2010 3:42:45 PM]
Author Index
Mitchell, J.
Innovative Design of New Laser-based Thickness Gauges for Inline Measurement of Strip Thickness
Mohammed, G.
Production Improvement of No. 2 BOSP at ESAI
Mondabaugh, J.
Efficient Coolant Removal From Metal Strip on Cold Mill/Temper Mill
Monks, J.S.
Detection of Internal Defects Prior to Value-added Processes to Minimize Final Product Surface Defects
Monson, A.
Quick Direct Tap at United States Steel Corporation’s Gary Works Q-BOP Shop
Moreland, J.
CIVS — Center for Innovation Through Visualization and Simulation
Mucci, A.
Oxygen/Carbon Injection System at Charter Steel Cleveland Facility, Project Description and Operational
Results
Muckelroy, N.C.
Microstructure and Mechanical Properties Comparison of Direct Quenched vs. Reaustenitized and
Quenched Plate
Mukherjee, A.
Raw Materials for the Blast Furnace
Mukherjee, S.
Utilization of Non-DR Grade/BF Grade Low-Fe Pellets for Direct Reduction and Melting Application
Mukhopadhyay, A.
Implementation Experience of Danieli-CQETM
at Hot Strip Mill
Mul, S.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Murphy, J.E.
Reducing Carbon Footprints with Green Hot Mill Lubricants
Mysko, D.
Addressing Climate Change — A Novel Greenhouse Gas Carbon Abatement Process (G-CAPTM
) for the
Iron and Steel Industry
file:///D:/Data/html/author_index.html (33 of 53) [12/7/2010 3:42:45 PM]
Author Index
NReturn to top
Nafisi, S.
Hydrogen and Nitrogen Control and Breakout Warning Model for Casting Nondegassed Steel
Nagasaka, T.
New Zinc Recovery Process From EAF Dust by Lime Addition
Recovery of Phosphorus and Manganese From Steelmaking Slag
Nakagawa, T.
Influence of Wall Surface Unevenness on Coke-pushing Force
Naser, J.
A Study on Supersonic Coherent Jet Characteristics Using Computational Fluid Dynamics
Neale, K.
Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters
Ng, K.W.
Direct Injection of Biofuel in Blast Furnace Ironmaking
Reduction of Blast Furnace Ironmaking Carbon Footprint Through Process Integration
Nicholls, M.A.
Chemical Removal of Internal Scale From HCI Pickle Liquor Pipeline
Strip Cleanliness, Extracting New Data From the Rolling Oil TGA Burn-off Curve
Nikitenko, E.
Bar Width Change in Finishing Stands of the Hot Strip Mill
Nomura, S.
Influence of Wall Surface Unevenness on Coke-pushing Force
Nöthe, T.
Coke Oven Gas Desulfurization — State of the Art
Nothegger, W.
Modern Process Models to Improve Product Quality on Plate Mills
Novotny, J.
Quick Direct Tap at United States Steel Corporation’s Gary Works Q-BOP Shop
Nylen, T.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
file:///D:/Data/html/author_index.html (34 of 53) [12/7/2010 3:42:45 PM]
Author Index
OReturn to top
O’Kane, P.
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Oberlander, J.
Advances in Bearing Reclamation
Odenthal, H.-J.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Ortner, P.
Increasing Casting Speed Without Mold Level Hunting Risk Using Switching Control
Ossberger, G.
A Non-Destructive Inspection System for Measuring Mechanical-technological Properties of Steel Grades
Ostrander, M.
Intercritically Austempered Steel
Owen, L.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
Owens, A.
STATCOM for Powerful Flicker Reduction From Electric Arc Furnace Operation
PReturn to top
Pan, Y.-T.
Development of Nano-size Precipitation Strengthening Hot-rolled Automobile Steels
Pandkar, S.
Improvement in Strip Temperature Control for High-strength Steel in a Radiant Tube Furnace
Partyka, A.
Steel Degassing Operations Using Mechanical Vacuum Pump Systems
Passantino, D.
Staying Ahead of the Curve — Beating the Commissioning Schedule for Continuous Slab Casters
Passenbrunner, T.
Increasing Casting Speed Without Mold Level Hunting Risk Using Switching Control
Pastucha, K.
file:///D:/Data/html/author_index.html (35 of 53) [12/7/2010 3:42:45 PM]
Author Index
Cost Optimization in the Production of Stainless and Special Steels in the AOD Converter by Using Oxidic
Alloys
Robotic Solutions for EAF — First Performance Review
Paulon, G.
Staying Ahead of the Curve — Beating the Commissioning Schedule for Continuous Slab Casters
Pei, M.
Flue Gas Flow Optimization for Energy Efficiency and Clean Operations in Integrated Steel Plants
Pettersson, F.
Analysis of the Economy and Emissions of Blast Furnace Operation With Top Gas Recycling
Picciolo, F.
Start-up and Results of the EAF Consteel®
Plant of Celsa Nordic — Mo I Rana (Norway)
Piccone, T.J.
Steel Liquidus Temperature Estimation From Thermodynamic Calculations
The Effect of Hydrogen on Mold Heat Removal in Continuous Casting
Piemonte, C.P.
Technological Upgrades of Slab Casting Plants: The Danieli Davy Distington Experience for Plant
Renovations and Performance Improvements
Pierer, R.
The Nature of Internal Defects in Continuously Cast Steel and Their Impact on Final Product Quality
The Working Group "Continuous Casting: Metallurgy and Materials (M2
CC)" at Leoben University, Austria
Pinheiro, B.C.
Combustion Rate Evaluation for Tires Blends Considering Their Injection Into the Blast Furnace Tuyeres
Pinto, E.M.
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Pisano, S.P.
Steel Mills: Energy Costs and the Green Planet
Plooij, J.
Proven Practice and Future Prospects of Blast Furnace Reductant Injection
Polo, A.
Implementation Experience of Danieli-CQETM
at Hot Strip Mill
Ponten, H.-J.
Cast in Time and Quality: Energy Savings Through Integrated Heat Temperature Forecast and
Scheduling Model
Porter, W.N.
file:///D:/Data/html/author_index.html (36 of 53) [12/7/2010 3:42:45 PM]
Author Index
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
Reducing Refractory Cost Using New Al2O3-SiC-C Bricks for Hot Iron Transport
Potter, M.S.
Analysis of Ti-, Mg- and Zr-bearing Inclusions in Ultra-low and Low Carbon Steels
Priesner, A.
Robotic Solutions for EAF — First Performance Review
Pronold, K.
Modernization of the Heavy-plate Rolling Mill at Dongkuk
Pustorino, M.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
QReturn to top
Quick, A.
In-Process Measurement of Organic Coating Thickness Using a Full Spectrum Infrared Sensor
RReturn to top
Radzilowski, R.H.
Investigation Into an HSM Finishing Stand Defect Which Generated FeO-type Lamination
Ratko, D.
Development of a Virtual Reality Blast Furnace Package Using CFD
Ray, C.B.
Raw Materials for the Blast Furnace
Recanati, A.
Oxygen-Enhanced Ladle Preheating Systems: Improved Tap-to-tap Cycle Time and Operating Cost
Reductions
Reichel, J.
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Reidetschläger, J.
file:///D:/Data/html/author_index.html (37 of 53) [12/7/2010 3:42:45 PM]
Author Index
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
Production
Reifferscheid, M.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Reinke, M.
Application of New Coke Oven Battery Technologies on the World Market
Reisinger, J.
A Non-Destructive Inspection System for Measuring Mechanical-technological Properties of Steel Grades
Ren, R.
Development of a Virtual Reality Blast Furnace Package Using CFD
Reufer, F.
Operation Results of the New Waste Gas Treatment Facility at ROGESA’s No. 2 Sinterplant — the EFATM
Process
Reuver, K.M.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Rhamdhani, M.A.
Development of a Comprehensive Model for Oxygen Steelmaking
Richards, V.L.
Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-rolled Fe-Mn-Al-Si-C Steel
Rick, C.-J.
Strategies for Use of Superheated Steam During Steel Refining in Converters
Rieger, D.
Asymmetrical Power Control of AC-EAFs by Structure-borne Sound Evaluation
Ritterman, G.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Roberts, M.
Graphical Tool for Bottleneck Identification and Productivity Improvements in Galvanizing Lines
Rogalski, E.J.
Decreasing MTTR Using Split Seal Technology
Rosburg, D.
A Targeted Approach to Optimizing a Plate Mill
Rose, L.
EAF Foamy Slag in Stainless Steel Production: Industrial Experiences and Further Development
Rosen, L.
file:///D:/Data/html/author_index.html (38 of 53) [12/7/2010 3:42:45 PM]
Author Index
Improved Temperature Uniformity in Batch Reheat Furnaces With Praxair’s Dilute Oxygen Combustion
(DOC) System
Rosenthal, D.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Rote, R.
Quick Direct Tap at United States Steel Corporation’s Gary Works Q-BOP Shop
Roth, J.-L.
Advanced Technologies for Residue Treatment — Successful Start-up of the PRIMUS®
Plant of Dragon
Steel in Taiwan
Rourke, M.E.
Innovative Methods for Integrating Utility and Production Automation Systems
Roy, S.K.
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
Rudge, D.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Rummler, T.
Clean and Efficient — Optimization of EAF Dedusting Systems
Radiation Protection — An Investment for the Future
Ryan, S.
Electric Arc Furnace Tap Changers
Ryman, C.
Process Integration as a Tool for Decision-makers in the Steel Industry
SReturn to top
Safe, P.
New Approaches to Meltshop Offgas Heat Recovery
Saha-Chaudhury, N.M.
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Sahajwalla, V.
Effect of Blending Rangal Coal on High-temperature Behavior of Cokes
file:///D:/Data/html/author_index.html (39 of 53) [12/7/2010 3:42:45 PM]
Author Index
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Sakaida, M.
Influence of Wall Surface Unevenness on Coke-pushing Force
Sampaio, R.S.
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Sattolo, M.
One Year Casting Experience for Rounds of High-quality Steel Grades at Nucor Memphis
Saul, G.
United States Steel Corporation Fairfield Works Coal Grinding Facility
Saxén, H.
Analysis of the Economy and Emissions of Blast Furnace Operation With Top Gas Recycling
Schaefer, H.
EAF Optimization: Efficient Use of Energy in the Electric Arc Furnace
Schaming, B.
Efficient Coolant Removal From Metal Strip on Cold Mill/Temper Mill
Schleiden, R.
Use of High Chrome Rolls in Cold Mills
Schliephake, H.
Heat Recovery for the EAF of Georgsmarienhütte, Germany
Schlobohm, J.
Care and Maintenance of Hydraulic Fluids
Schlueter, J.
Near-net-shape Casting of Steel — Belt Casting Technology
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Schmale, K.
BOF Gas Cleaning: Second Generation of Dry-type ESP and Hydro Hybrid Filter Technology
Schmidt, E.
Thermodynamic Modeling to Improve Foamy Slag Practice in the EAF
Schmidt, U.
SIMETAL Corex®
: Prepared For Present and Future Ironmaking Challenges
Schmoller, F.-X.
SIROLL HM Work Roll Lubrication for Electrical Energy Reduction and Strip Surface Improvement
file:///D:/Data/html/author_index.html (40 of 53) [12/7/2010 3:42:45 PM]
Author Index
Schultz, A.
Innovative Design of New Laser-based Thickness Gauges for Inline Measurement of Strip Thickness
Schulz, O.
Slab Caster Revamping—The Approach to Excel in the Market
Schuster, D.
Coke Oven Gas Desulfurization — State of the Art
Schuster, R.
SIROLL HM Work Roll Lubrication for Electrical Energy Reduction and Strip Surface Improvement
Strategies for Flexible Hot Mill Modernizations — Concepts for Modernization and Extension of Hot Strip
Mills
Schuster, S.
CFD Simulation of Co-injection of Plastic Particles and Oil Into a Blast Furnace Raceway
Schwabe, C.
Electric Arc Furnace Tap Changers
Schweitzer, D.
The Design and Installation of a Video Camera Line-up System for Oven Machines at DTE Energy
Services, EES Coke Battery No. 5, Detroit, Michigan
Scipolo, V.
iEAF®
Technology: Recent Developments and Results at TenarisDalmine, Italy
Dynamic Modeling of the BOF for Endpoint Prediction Using EFSOP®
Technology Results and
Implementation at Riva Taranto
Opportunities for Increasing Productivity and Lowering Operating Costs While Reducing GHG Emissions
in Steelmaking
Sedivy, C.
The ArCOS Furnace Automation Concept — Much More Than a Simple Electrode Control System
Seilinger, A.
SIROLL HM Work Roll Lubrication for Electrical Energy Reduction and Strip Surface Improvement
Selent, A.
VIP 08 Flatness Measurement and Control System
Sengupta, J.
Correlation Between F-value and Sliver Index for Ultra-low Carbon Steel Grades at ArcelorMittal
Dofasco’s No. 1 Continuous Caster
Development of a Validated 3-D Thermal Model for ArcelorMittal Dofasco’s No. 2 Continuous Caster Mold
to Evaluate Design Improvements for High-speed Casting
Nozzle Design for ArcelorMittal Dofasco’s No. 1 Continuous Caster for Minimizing Sliver Defects
file:///D:/Data/html/author_index.html (41 of 53) [12/7/2010 3:42:45 PM]
Author Index
Servanton, J.J.
Shape Improvement in Cut-to-length Line With an In-line Quarto Skinpass Mill
Seshadri, V.
Effects of Some Operational Parameters Upon Degasification Rate, Mixing Time, Splashing and Skull
Development in a Combined-blow Converter During Steelmaking Refining: A Physical Model Approach
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Sharifi, E.
Effect of Preheating Temperature on the Melting and Decarburization Behavior of DRI in Steelmaking
Slag
Sharma, D.
Line Differential Protection Systems Using Low-power Current Sensors Applied to EAF Circuits
Sharpe, C.
JSW Steel No. 3 Blast Furnace: An Introduction to India’s Largest Blast Furnace
Shastry, C.R.
Analysis of Edge Buildup on Aluminized Steel Strip Using Computational Fluid Dynamics (CFD) and
Metallography
Shellhammer, T.
High-conductivity Copper in the Blast Furnace
Shenghe, C.
New Electrolytic Tinning Line and Tin-free Steel Line for BAOSTEEL, China
Shiau, J.-S.
Investigation of Related Factors of Blast Furnace Slag Fluidity and Its Application
Shibata, H.
Influence of Plume Eye Area on Surface Reaction Rate of Oxygen-water System Under Bottom Bubbling
Condition
Shizuo, M.
The Mill Revamping of Chubu Steel Plate
Shlik, O.
Jets in Steelmaking Units: The Source of Information About Physical and Chemical Transformation Into
the Steel Melt
Shriver, R.
The Design and Installation of a Video Camera Line-up System for Oven Machines at DTE Energy
Services, EES Coke Battery No. 5, Detroit, Michigan
Shutts, A.J.
Microalloy Precipitation in Hot Charged Slabs
file:///D:/Data/html/author_index.html (42 of 53) [12/7/2010 3:42:45 PM]
Author Index
Silva, L.F.
Increasing the Refractory Wear Profile Control on the Steel Ladles at V&M do Brazil
Simmons, J.
Heat Recovery for the EAF of Georgsmarienhütte, Germany
Sims, J.T.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Singh, R.P.
The New TATA Steel “H” Blast Furnace: Design Concept, Project Development and Operating Results
Skidmore, C.
Kinetics of Reduction of FeO in EAF Steelmaking Slag by Metallurgical Coke and Waste Plastics Blends
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Skolnik, T.
Description of a Simulation Method for Evaluating the Thermal Properties of Insulation Materials Used on
an Evaporative Skid Cooling System in Reheat Furnaces
Smith, R.P.
Two Hundred Years of Rolling on the Brandywine
Smith, S.M.
The Effect of Hydrogen on Mold Heat Removal in Continuous Casting
Song, J.
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
Water Modeling of Stirring and Braking Processes in a Slab Caster Mold
Speer, J.G.
Microalloy Precipitation in Hot Charged Slabs
Spiess, J.
Cost Optimization in the Production of Stainless and Special Steels in the AOD Converter by Using Oxidic
Alloys
Stackhouse, B.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Stalheim, D.G.
Production of Fine Grained As-rolled Structural Plate Steels
Steeper, M.
The Plate Mill as a Metallurgical Tool
Stiasny, H.
Next Generation Sintering Technologies: Latest Developments to Achieve Real Cost-efficiency in Sinter
file:///D:/Data/html/author_index.html (43 of 53) [12/7/2010 3:42:45 PM]
Author Index
Production
Stone, R.
Innovative Drop-in Sensor System at Essar Steel Algoma
Story, S.R.
Analysis of Ti-, Mg- and Zr-bearing Inclusions in Ultra-low and Low Carbon Steels
Strasser, J.S.
Water Treatment Chemistry Impact on CSP Mill Product Quality and Production Rate
Sugiura, M.
Influence of Wall Surface Unevenness on Coke-pushing Force
Sundermann, C.
New Developments in Drive Trains for Roughing and Plate Mills
Sundqvist, L.O.
Characterization of the State of LKAB Experimental BF Hearth
Sussman, R.C.
Value Creation Through R&D at ArcelorMittal
TReturn to top
Takamori, A.
Improvement of Wire Rods Processing Technology
Takenami, M.
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
Tamadonfar, P.
Numerical Investigation of Air Knives with Multiple-impinging Slot Jets in Continuous Hot-dip Galvanizing
Tambe, S.
Fault Tolerant SVC ArcComp System for DC Arc Furnaces
Tavano, A.
Achieving Carbon-free Emissions via the ENERGIRON DR Process
Tehranchi, F.
Water Modeling of Stirring and Braking Processes in a Slab Caster Mold
Tembergen, D.
Operating Principle and Plant Design of the VD/VOD Facility at ThyssenKrupp Acciai Speciali Terni (TK
AST) for the Production of Superferritic Stainless Steel
Tesselaar, E.
file:///D:/Data/html/author_index.html (44 of 53) [12/7/2010 3:42:45 PM]
Author Index
Proven Practice and Future Prospects of Blast Furnace Reductant Injection
Tessendorf, R.
Synchronous and Induction Motors for Main Drive Applications
Teubl, W.
AHMSA’s Blast Furnace No. 4 Operation with Low-grade Raw Materials for Highest Productivity
Thacker, J.A.
Optimization of a Submerged Entry Nozzle Design to Reduce Nonmetallic Inclusions in Line Pipe Steel
Thackray, R.
Rating Inclusions in an As-cast Carbon Steel
Thiedemann, U.
Oscillation Measurement and Multiphase Flow Simulation of the AOD Process
Thielert, H.
Coke Oven Gas Desulfurization — State of the Art
Thomas, B.G.
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
Microalloy Precipitation in Hot Charged Slabs
Thomas, S.
Study of the Use of Steel Industry Fuel on Coking Operations
Thomson, J.G.
The McMaster Steel Research Center: A Model for Industry-University Collaboration
Thorstenson, E.
Drive Selection for Rolling Mills
Tian, F.
Burden Descending and Redistribution in a Blast Furnace
Timmer, R.
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Todd, I.
Rating Inclusions in an As-cast Carbon Steel
Todoschuk, T.
Direct Injection of Biofuel in Blast Furnace Ironmaking
Reduction of Blast Furnace Ironmaking Carbon Footprint Through Process Integration
Töpfer, F.
Fit for the Future by Modernization — Latest Solutions for Tandem Cold Mills
Toschi, F.
file:///D:/Data/html/author_index.html (45 of 53) [12/7/2010 3:42:45 PM]
Author Index
The UGR Process: The Danieli Innovative Process for a Low-cost Production of Seismic Concrete
Reinforcement Steel
Totten, C.A.
World-class Crane and Runway System for the 21st Century
Towsey, P.S.
Comparison of Byproduct and Heat-Recovery Cokemaking Technologies
Trapp, M.
Optimization of Offgas System Performance at Hamilton Specialty Bar
Travaglini, C.
"The House of the World’s Longest Billet" The New Micromill Danieli (MI.DA®
) at CMC Steel Arizona: An
Innovative Process for the Most Competitive Production of Rebar Product
One Year Casting Experience for Rounds of High-quality Steel Grades at Nucor Memphis
Tremea, A.
Spun Cast Semi-HSS Rolls in Cold Mill Applications
Trinh, M.
Development of a Validated 3-D Thermal Model for ArcelorMittal Dofasco’s No. 2 Continuous Caster Mold
to Evaluate Design Improvements for High-speed Casting
Triplat, J.
Operating Principle and Plant Design of the VD/VOD Facility at ThyssenKrupp Acciai Speciali Terni (TK
AST) for the Production of Superferritic Stainless Steel
Trueba, L.
Thermodynamic Modeling to Improve Foamy Slag Practice in the EAF
Tsai, J.-H.
Thermal Efficiency Optimization of the Hot Stove System
Tsai, T.H.
Optimization of a Submerged Entry Nozzle Design to Reduce Nonmetallic Inclusions in Line Pipe Steel
Tsakiropoulos, P.
Rating Inclusions in an As-cast Carbon Steel
Turchetto, M.
Integrated New Downstream Facilities at Acciaieria Arvedi, Italy
UReturn to top
Uchida, Y.
file:///D:/Data/html/author_index.html (46 of 53) [12/7/2010 3:42:45 PM]
Author Index
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
Ughadpaga, K.
Innovative Drop-in Sensor System at Essar Steel Algoma
Production Improvement of No. 2 BOSP at ESAI
VReturn to top
Van Aken, D.C.
Effect of Cerium on the Inoculation of Acicular Ferrite in Hot-rolled Fe-Mn-Al-Si-C Steel
Van Kollenburg, R.J.W.M.
Interpretation of UT and EC Results in Roll Testing
Van Laar, F.
ArcelorMittal Dofasco No. 2 Blast Furnace Stove Repairs
Severstal L-Blast Furnace Hearth Refractories Findings and Repair at Sparrows Point
Van Laar, R.
Low-cost Hot Metal: The Future of Blast Furnace Ironmaking
The Future of Hot Blast Stoves
VanderWaal, B.
Formation of an Impromptu EAF Process Team at CMC Steel Texas
Vanover, K.
Single Charge EAF Modification: Installation and Experience
Vasiliw, T.
Factors to Consider in the Selection of a Mill Grease
Vaynshteyn, R.
Low-cost Hot Metal: The Future of Blast Furnace Ironmaking
Vergne, C.
Implementation of In-service Key Parameters of HSS Work Roll Grade Dedicated to Advanced Cold
Rolling
Vidales, G.
30 Million Tonnes in the Hearth of Blast Furnace No. 5 at AHMSA Mexico
Villasana, O.
AHMSA’s Blast Furnace No. 4 Operation with Low-grade Raw Materials for Highest Productivity
Visus, J.
Oxygen-Enhanced Ladle Preheating Systems: Improved Tap-to-tap Cycle Time and Operating Cost
file:///D:/Data/html/author_index.html (47 of 53) [12/7/2010 3:42:45 PM]
Author Index
Reductions
Volpe, M.
Steel Degassing Operations Using Mechanical Vacuum Pump Systems
WReturn to top
Wallace, K.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Walsh, R.
High-conductivity Copper in the Blast Furnace
Wang, D.
Application of an Intelligent Centralized Lubrication System in the Iron and Steel Industry
Wang, F.
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
Wang, J.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Wang, Y.
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Vapor Pressure Measurements of Zinc and Lead Chlorides From Slag System
Wans, J.
Near-net-shape Casting of Steel — Belt Casting Technology
Warnock, B.J.
Work Roll Temperature and Thermal Crown Measurement to Improve Roll Cooling Efficiency
Wasem, L.A.
Physical and Mathematical Modeling of Transient Thermal and Liquid Flow Inside a Blast Furnace Hearth
During the Tapping Period
Wen, W.
New Electrolytic Tinning Line and Tin-free Steel Line for BAOSTEEL, China
Wen, Y.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Westendorp, A.
file:///D:/Data/html/author_index.html (48 of 53) [12/7/2010 3:42:45 PM]
Author Index
Optimization of Surface Quality Through Mold Thermal Monitoring
Westfall, L.A.
Addressing Climate Change — A Novel Greenhouse Gas Carbon Abatement Process (G-CAPTM
) for the
Iron and Steel Industry
Weyant, S.
Regulatory Impact on Diesel Engine Emissions
Wheeler, F.
Operational Benefits and Design Considerations for a Stationary Electric Furnace for Continuous
Steelmaking
Whitfield, P.
The Gimbal Top Goes On-line, A New Era for Blast Furnace Charging
Wieder, K.
SIMETAL Corex®
: Prepared For Present and Future Ironmaking Challenges
Wikstrom, J.-O.
Characterization of the State of LKAB Experimental BF Hearth
Willems, S.
Advanced Technologies for Skin Passing of Stainless Steel and Carbon Steel
Wineland, E.
Advances in Bearing Reclamation
Wong, J.
Chemical Removal of Internal Scale From HCI Pickle Liquor Pipeline
Wong, K.C.
United States Steel Corporation Fairfield Works Coal Grinding Facility
Wright, K.
Graphical Tool for Bottleneck Identification and Productivity Improvements in Galvanizing Lines
Wu, B.
Development of a Virtual Reality Blast Furnace Package Using CFD
Numerical Investigation and Optimization of a Venturi Scrubber
Wu, R.
Reducing Carbon Footprints with Green Hot Mill Lubricants
Wyatt, A.
EAF Optimization: Efficient Use of Energy in the Electric Arc Furnace
Wübbels, T.
BOF Gas Cleaning: Second Generation of Dry-type ESP and Hydro Hybrid Filter Technology
file:///D:/Data/html/author_index.html (49 of 53) [12/7/2010 3:42:45 PM]
Author Index
Wüenning, J.G.
Lowering Exhaust Gas Losses and Emissions With Newly Developed Recuperative and Regenerative
Burners
Wüstenhagen, G.J.
Requirements on Standard Tests of Radial Shafts Seals for the Heavy Industry
Rotary Seals for Heavy-duty Applications — Technology Meets Customer Requirements
XReturn to top
Xie, Y.
Mechanical Properties and Development of Hot-dip Coated Solid Solution Strengthened Low Carbon
Steels for Automobiles
Xinan, G.
PLTCM Network Topologies
Xu, K.
Microalloy Precipitation in Hot Charged Slabs
Xu, X.
On-line Monitoring of Ladle Stirring
YReturn to top
Yamamura, H.
Experimental Study on Heat Transfer Behavior Through the Mold Flux Film Between the Solidifying Shell
and Mold
Yang, H.
Effects of FC Mold on Slab and Final Product Qualities at Low Throughputs
Water Modeling of Stirring and Braking Processes in a Slab Caster Mold
Yang, J.-R.
Development of Nano-size Precipitation Strengthening Hot-rolled Automobile Steels
Yang, W.
On-line Monitoring of Ladle Stirring
Yaniga, S.E.
Tuyere Life Improvements and Operating Enhancements on Great Lakes B-2 Blast Furnace
file:///D:/Data/html/author_index.html (50 of 53) [12/7/2010 3:42:45 PM]
Author Index
Yau, W.-T.
Thermal Efficiency Optimization of the Hot Stove System
Yavuz, M.M.
Mold Flow Modeling of ArcelorMittal Riverdale and POSCO Thin Slab Casters
Nozzle Design for ArcelorMittal Dofasco’s No. 1 Continuous Caster for Minimizing Sliver Defects
Optimization of a Submerged Entry Nozzle Design to Reduce Nonmetallic Inclusions in Line Pipe Steel
Yeh, T.-F.
Improvement of the Periodical Mold Level Fluctuation in a Slab Caster and Relevant Sliver Defects on
Hot-rolled Coils
Yen, H.-W.
Development of Nano-size Precipitation Strengthening Hot-rolled Automobile Steels
Yildirim, H.
Time-based Scheduling System for Steelmaking and Continuous Casting Production
Yoshifumi, N.
New Electrolytic Tinning Line and Tin-free Steel Line for BAOSTEEL, China
Yoshitomi, J.
Highly Durable Refractory Slide Nozzle Plate for Continuous Casting of Steel
Yu, Q.
Improving Ladle Stir Reliability and Service Life Using New Design Purge Plug
Reducing Refractory Cost Using New Al2O3-SiC-C Bricks for Hot Iron Transport
Yu, X.
The Influence of Temperature and Aluminum Content on Galvannealed Coating
ZReturn to top
Zaharia, M.
Utilization of Waste Plastics in EAF Steelmaking: High-temperature Interactions between Slag and
Carbonaceous Materials
Zak, B.E.
A Multi-faceted Approach to Reducing Electricity Costs in the Steel Industry
Zanelli, U.
Advanced Revamping Solutions for Long Product Casting
Zanusso, U.
file:///D:/Data/html/author_index.html (51 of 53) [12/7/2010 3:42:45 PM]
Author Index
Tenova FlexyTech®
Regenerative Flameless Burners
Tenova FlexyTech®
TRGX Burner Modeling and Testing
Zehe, W.J.
Role of the Industrial Engineer in Today’s Steel Producing Environment
Zeien, R.
Oxygen/Carbon Injection System at Charter Steel Cleveland Facility, Project Description and Operational
Results
Zendejas, E.
Achieving Carbon-free Emissions via the ENERGIRON DR Process
Zhang, H.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
The Influence of Temperature and Aluminum Content on Galvannealed Coating
Zhang, K.
Application of an Intelligent Centralized Lubrication System in the Iron and Steel Industry
Zhang, L.
Development of Self-braking Nozzle for Steel Slab Continuous Casting Process
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
Solidification and Dendrite Growth of Stainless Steel During Continuous Casting
Zhang, X.
Study on the Influence of Secondary Cooling Water Coverage Area of Bloom Surface on Cooling Effect in
Continuous Casting of Gearing Steel
Zhang, Y.
Application of an Intelligent Centralized Lubrication System in the Iron and Steel Industry
Vapor Pressure Measurements of Zinc and Lead Chlorides From Slag System
Zhao, H.
Application of an Intelligent Centralized Lubrication System in the Iron and Steel Industry
Zhao, J.
Application of an Intelligent Centralized Lubrication System in the Iron and Steel Industry
Zhao, Y.
Development of Burden Distribution Technology at U. S. Steel Canada’s Hamilton Works ‘E’ Blast Furnace
Zheng, D.
Numerical Investigation and Optimization of a Venturi Scrubber
Zhongyang, H.
file:///D:/Data/html/author_index.html (52 of 53) [12/7/2010 3:42:45 PM]
Author Index
Reducing Refractory Cost Using New Al2O3-SiC-C Bricks for Hot Iron Transport
Zhou, C.Q.
AIME Keynote and J. Keith Brimacombe Memorial Lecture: Visualizing the Future in Steel Manufacturing
Burden Descending and Redistribution in a Blast Furnace
CIVS — Center for Innovation Through Visualization and Simulation
Development of a Virtual Reality Blast Furnace Package Using CFD
Numerical Investigation and Optimization of a Venturi Scrubber
Zhou, H.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Zhou, X.
A Novel Steady-state Technique for Measuring the Heat Extracted by Secondary Cooling Sprays
Zong, Y.
Numerical Simulation of the Effects of High Radiative Coating on Heat Transfer Process in Regenerator
of BF Hot Stove
Zuliani, D.J.
Opportunities for Increasing Productivity and Lowering Operating Costs While Reducing GHG Emissions
in Steelmaking
Zuo, X.
Entrapment of Inclusions in Continuous Casting Billet: Industrial Observation and Modeling
file:///D:/Data/html/author_index.html (53 of 53) [12/7/2010 3:42:45 PM]