as – air slide sampler - home - welcome to m&wm-w.dk/wp-content/uploads/as.pdf · as – air...
TRANSCRIPT
M&W JAWO HANDLING | Oldenvej 5 | 3490 Kvistgaard | Denmark | Phone: +45 49139822 |
M&W JAWO HANDLING
AS – AIR SLIDE SAMPLERSAMPLING OF MATERIAL
M&W JAWO HANDLING | Oldenvej 5 | 3490 Kvistgaard | Denmark | Phone: +45 49139822 | E-mail: m-
AIR SLIDE SAMPLER MATERIAL IN AIR SLIDES
� AS samples powered materials, e.g. cement, flowing in an air slide.
� AS samples in preset intervals.
� AS is easy to install and use.
[email protected] | Web: www.m-w.dk
IN AIR SLIDES
AS samples powered materials, e.g. cement, flowing in an air slide.
AS samples in preset intervals.
AS is easy to install and use.
M&W JAWO HANDLING | Oldenvej 5 | 3490 Kvistgaard | Denmark | Phone: +45 49139822 | E-mail: [email protected] | Web: www.m-w.dk
M&W JAWO HANDLING
PRINCIPLES OF OPERATION
The Air Slide Sampler (AS) is designed for continuous or
intermittent sample extraction of dry, non-sticky powdered
material flowing in air slides and in a non-condensing
environment.
GENERAL DESCRIPTION
The Air Slide Sampler has a rotating tube provided with a 4 mm
longitudinal slit. The stainless steel tube is fastened in the
hollow axle gear in a way that the extracted sample will fall
directly into the sample bottle.
The small amount of sample per rotation gives an opportunity
for continuous sampling over a set period, thus producing a
good average sample. In the intervals between samplings the
rotating tube is parked with the slit into a protective guard. The
protective guard is positioned opposite the material flow.
With an air slide capacity of 500 tons/hour and continuous
sampling the sampling capacity will be 1 liter/min., i.e. 60
liters/hour. Other air slide capacities are dependent on the
amount of sample linear.
The amount of samples can be reduced by changing the
operation philosophy from continuous sampling to sampling
only a few seconds – break – repeat this until the required
amount of sampling intervals has been reached and thereby the
required amount of samples.
TECHNICAL DATA
Drive unit: Geared brake motor
Voltage: 400/230V-50Hz or as required
Power: 0.25 kW
Sensor: Position sensor
TYPE DESIGNATION:
Type A (mm) B (mm)
AS 200/400 200–315 Specified by customer
AS 400/600 315–350 Specified by customer
AS 600/800 350–450 Specified by customer
DRAWING
M&W JAWO HANDLING is an internationally working
engineering company specialised in design,
manufacturing and supply of individual machine units
and systems for representative sampling of powder
and bulk material. Several hundred systems are
successfully sampling in the industry world-wide.
M&W JAWO HANDLING is an internationally working
engineering company specialised in design,
manufacturing and supply of individual machine units
and systems for representative sampling of powder
and bulk material. Several hundred systems are
successfully sampling in the industry world-wide.