architectural portfolio

Sam [email protected]: 07739316841

1

2

3

4

5

6

7

89

10

The Boulevard

Hess

le R

oad

Hessle Road

The Green Line

The Green Line

Key

1 Siemens Academy 2 Community Centre and adult learning centre3 Primary school4 Community sports centre Old boulevard stadium

5 Community shops6 Green Tech and wind turbine research7 Light support, ‘green’ industry 8 St Andrews transport hub9 St andrews dock Tidal power research centre

10 Play ground

Hull regeneration

Public Spaces

Private spaces

Mechanic

ally ve

ntilate

d

Daylight C

ontrol N

eeded

Natual D

aylig

ht C

ontro

l

Shade Tolera

ble

Natura

lly L

it

Task L

ig

htin

g

Soft

Lightin

g

Natu

ra

lly ve

ntil

ate

d

Red Heate

d In W

inte

r

Red Heate

d In W

inte

r

Management Offices

Staff facilities will come off the reception.containing offices, staffrooms,storage, a sickbay and toilets.

Classrooms

These spaces should be flexable so to allow the children using it to learn in a varieties of ways in groups or alone for a variety of subjects

Sports Hall

A multiuse hall utilised for a variety sports and events.

Changing rooms

changing rooms and showers for use by students

Reception

Reception will be the entry into the school for both the students and public. providing a means of contact to parents and the public.

Cafe

A multiuse cafe space for use by the com-munity

WCs

Toilets for staff and students seperate

WCs

Toilets for staff and public

Staff Room

Relaxing environ ment for use by the staff.

Staff Room

Relaxing environ ment for use by the staff.

Offices

Staff facilities will come off the reception.containing offices, staffrooms,storage, a sickbay and toilets.

Dinning Room

Linked to the sports hall so i can be used as an extention to the hall for events

Kitchen

Linked to the sports hall so i can be used as an extention to the hall for events with seperate external access for deliveries

Group learning

These learning areas will be open and flexible for use in group learning, conference and presentations

Library

A library and ICT facilities for use of both the public. the area will be light and open.

Consultation rooms

Private offeces for use by the community for advice and help

Activity rooms

these offices will be available for the local community for business meetings and events

Adult Study areas


Lecture rooms


Plant Room

For access to venilation and building systems for maintainance and governence

Reception

Reception will be the entry into the community centre and libary public.

School

Community

Centre

Program Schedual

rchardThe

Second floorSite plan

Third floor

Fourth floor

Flats

Reasearch

Flats

Reasearch

Flats

Reasearch

rchardThe


Third floor

Fourth floor

Flats

Reasearch

Flats

Reasearch

Flats

Reasearch


rchardTheGround �oor First Floor

Shop

Hydroponic Growing

Food Prep.

Kitchen

Cafe

restaurant

Dining Room

Courtyard

WetRoom

W.C

C.UBOILER

Skipton House

STORE

STORE

34

Snookertable

Media room

Study

11

1

22

34

5

1

5

1

11

34

5

Skipton House

Drive

Drwg No

Scale Date

Project

Title

ASSOCIATESPITCHFORD DESIGN

CHARTERED ARCHITECTS

21 Victoria AvenueHarrogate HG1 5RD

T: 01423 529100F: 01423 529107

Proposed Plans, Section & Elevations

Skipton HouseSkipton on swale,Thirsk

For Mr & Mrs B. Stevens

Proposed Conversion of attached Barn at

SH/PL02

FEB 20091:1001:501:200

SECTION 1:50

WEST ELEVATION 1:50

NORTH ELEVATION 1:50

EAST ELEVATION 1:50

GROUND FLOOR PLAN 1:100

FIRST FLOOR PLAN 1:100

GATE ELEVATION 1:50

GATE PLAN 1:200

WEST ELEVATION WITH DOORS CLOSED 1:100

KEY:1. NEW TIMBER PAINTED DOUBLE GLAZED WINDOWS

GLAZING DETAILS & PROFILE TO BE AGREED.

2. NEW TIMBER DOUBLE GLAZED DOORS GLAZING DETAIL &SECTION PROFILE TO BE AGREED.

3. NATURAL SLATE ROOF COVERING SAMPLE TO BEPROVIDED PRIOR TO CONSTRUCTION.

4. CONSERVATION ROOFLIGHTS.

5. CAST IRON RAINWATER PIPES AND DOWNPIPES

EXISTING FLOOR TO BE STRENGTHEND ASNECESSARY - STRUCTURAL ENGINEER TOADVISE.

EXISTING GATE

EXISTING INTERNAL WALLS TO BE DRYLINED ANDINSULATED INCORPORATING NEW CHEMICALINJECTION DPC

NEW SUSPENDED TIMBERFLOOR DETAIL TBA.

ASSUMED OUTLINE OF EXISTINGFOUNDATIONS - TOBE CONFIRMED

NEW DOORS TOSEPERATE DETAIL

WALLS TO BE DRYLINED

NEW ROOF CONSTRUCTION &INSULATION TO MEET CURRENTBUILDING REGS

NEW SIDE GATE TOSEPERATE DETAIL

RE-BUILD GATE PILLARTO WIDEN ACCESS INTOEXISTING DRIVE

CARRY OUTMODIFICATIONS TOEXISTING BOUNDARYWALL FOR NEW WIDERACCESS GATES AS SHOWN

RE-USE BRICKS/ COPINGSTONE TO REBUILDPILLAR IN NEW POSITIONAS SHOWN . RE-HANGEXISTING GATE &PROVIDE NEWPERSONNEL GATE TOSAME DETAILS

EXISTING PILLAR A

APPROX POSITION OFNEW SEPTIC TANKCAPACITY & DETAILSTO BE AGREED

NEW SIDE ACCESS GATETO SAME DETAIL ASEXISTING GATE.

BOILER EXACT POSSITION TOBE AGREED

NEW DRAINAGE RUNS FOR NEWTOILETS ARE TO BE AGREED

EXISTING FLOOR TO BEREFURBISHED

EXISTING VIRTICAL BOARDEDDOORS TO BE RENEWED TOACT AS SHUTTERS FOR NEWDOUBLE DOORS

OBSCURE GLAZING TO BE USEDIN NEW WC PATTERN TBA

A

Dining Room

Courtyard

WetRoom

W.C

C.UBOILER

Skipton House

STORE

STORE

34

Snookertable

Media room

Study

11

1

22

34

5

1

5

1

11

34

5

Skipton House

Drive

Drwg No

Scale Date

Project

Title

ASSOCIATESPITCHFORD DESIGN

CHARTERED ARCHITECTS

21 Victoria AvenueHarrogate HG1 5RD

T: 01423 529100F: 01423 529107

Proposed Plans, Section & Elevations

Skipton HouseSkipton on swale,Thirsk

For Mr & Mrs B. Stevens

Proposed Conversion of attached Barn at

SH/PL02

FEB 20091:1001:501:200

SECTION 1:50

WEST ELEVATION 1:50

NORTH ELEVATION 1:50

EAST ELEVATION 1:50

GROUND FLOOR PLAN 1:100

FIRST FLOOR PLAN 1:100

GATE ELEVATION 1:50

GATE PLAN 1:200

WEST ELEVATION WITH DOORS CLOSED 1:100

KEY:1. NEW TIMBER PAINTED DOUBLE GLAZED WINDOWS

GLAZING DETAILS & PROFILE TO BE AGREED.

2. NEW TIMBER DOUBLE GLAZED DOORS GLAZING DETAIL &SECTION PROFILE TO BE AGREED.

3. NATURAL SLATE ROOF COVERING SAMPLE TO BEPROVIDED PRIOR TO CONSTRUCTION.

4. CONSERVATION ROOFLIGHTS.

5. CAST IRON RAINWATER PIPES AND DOWNPIPES

EXISTING FLOOR TO BE STRENGTHEND ASNECESSARY - STRUCTURAL ENGINEER TOADVISE.

EXISTING GATE

EXISTING INTERNAL WALLS TO BE DRYLINED ANDINSULATED INCORPORATING NEW CHEMICALINJECTION DPC

NEW SUSPENDED TIMBERFLOOR DETAIL TBA.

ASSUMED OUTLINE OF EXISTINGFOUNDATIONS - TOBE CONFIRMED

NEW DOORS TOSEPERATE DETAIL

WALLS TO BE DRYLINED

NEW ROOF CONSTRUCTION &INSULATION TO MEET CURRENTBUILDING REGS

NEW SIDE GATE TOSEPERATE DETAIL

RE-BUILD GATE PILLARTO WIDEN ACCESS INTOEXISTING DRIVE

CARRY OUTMODIFICATIONS TOEXISTING BOUNDARYWALL FOR NEW WIDERACCESS GATES AS SHOWN

RE-USE BRICKS/ COPINGSTONE TO REBUILDPILLAR IN NEW POSITIONAS SHOWN . RE-HANGEXISTING GATE &PROVIDE NEWPERSONNEL GATE TOSAME DETAILS

EXISTING PILLAR A

APPROX POSITION OFNEW SEPTIC TANKCAPACITY & DETAILSTO BE AGREED

NEW SIDE ACCESS GATETO SAME DETAIL ASEXISTING GATE.

BOILER EXACT POSSITION TOBE AGREED

NEW DRAINAGE RUNS FOR NEWTOILETS ARE TO BE AGREED

EXISTING FLOOR TO BEREFURBISHED

EXISTING VIRTICAL BOARDEDDOORS TO BE RENEWED TOACT AS SHUTTERS FOR NEWDOUBLE DOORS

OBSCURE GLAZING TO BE USEDIN NEW WC PATTERN TBA

A

PROPOSED GROUND FLOOR PLAN

LIVING ROOM

STUDY

PROPOSED FIRST FLOOR PLAN / PART ROOF LAYOUT

CONSERVATORY

ENT. HALL

UTILITY

WC KITCHEN

EN-SUITE

BED 2

BATH

BED 1

BED 4

BED 3

PROPOSED ROOF PLAN

WINDOWS / DOORS

New glazed doors to be in pilkington k insulated glass (4-16-4) toughened inaccordance with Doc N of the current building regs.

All new glazing to new windows are to be in Pilkington K insulated glass(4-16-4) to conform to current building regulations.All new windows are to provide background trickle ventilation at a rate of8000mm2, through 16 mm slot within the head of the window.Vents to be complete with mesh inset to prevent against ingress of insects.Vents to comply with the requirements of Part F1 of the building regs. Newopening lights to be 1/20th of the floor area.

Provide and fix new purpose made windows, style to be agreed. Allironmongery is to be agreed with client.First floor bedroom window is to allow escape provisionin accordance with current building regs (Part B Fire safety)Window to be at least 450 x 750 mm clear opening area.Bottom of opening to be no more than 1100mm above FFL

DECORATIONS

All new woodwork generally to be decorated using 1 ct primer,1 u/ct and 2 top cts gloss finish, colour white to match exstg.Newly plastered walls and ceilings are to receive 1 mist ct and 2 topcts vinyl matt emulsion, colour tba

PLASTERING

Provide and fix new 12.5mm p/board and skim plaster ceilings to newextension on each floor. New ceiling joists size to be 150 x 50 mm

All new blockwork walls are to receive 13mm two ct plaster and skim finish.Alternatively use dot and dab p/board and skim plaster finish.Bathroom to receive foil backed p/board to new stud walls

JOINERY

Provide and fix new sw skirtings to all new walls size and profile to matchexstg. All new doors, linings and architraves etc are to match exstg in styleand profile

PLUMBING / HEATING

Plumbing sub-contractor to assess condition of exstg heating system andensure capacity of exstg system for additional radiators. Provide additionalinformation to HBC if requested by building control.Supply and install new rads connected into exstg heating system.Rads sized to suit new room and are to match the exstg withThermostatic valves,Extension to heating system is to be designed and completed by specialistcontractor to comply with current (April 2006) Building Regulations Part L1

EN-SUITE SHOWER ROOM

New en-suite bathroom to have mechanical extract to give a rate of not lessthan 15 litres / sec operated by light switch control and timer overun.Basin to have 75mm re-sealing bottle trap with 32mm dia waste.Contractor to provide for all new hot and cold water connections.All pipework is to be carefully and correctly installed in accordancewith Part H of the approved documents for sanitaryware pipework.All plumbing and waste conections are to be carried out by approvedsub-contractor. Contractor to allow for supply and fixing new shower, WC,Basins, accessories etc. Allow for fixing client supply floor and wall tiling (fullheight) spec to be agreed.

DRAINAGE

Drainage runs and invert levels are to be accurately located on site to ensurethe drainage layout as indicated is feasible.Allow for all connections to the exstg foul drainage layout to accommodatenew plumbing layout.Minimum falls to be 1:60 for 100mm drains and 1:80 for 150mm drains.Where new drains connect into exstg the invert levels are to be checked priorto connection and approved by building control.Where drains pass through external walls they are to be lintolled as necessary.All drains are to be laid on sand bed and surrounded within pea gravel. Allground disturbed by these works is to be made good upon completion.All redundant manholes and drainage runs are to be removed anddisconnected.

RAINWATER GOODS

Provide and fix 100mm dia half round gutter screw fixed into the fascia boardwith specialist fixings and stop ends where required. All laid to falls, colourblack to match exstg.

ELECTRICS

Supply and fix new electrics as indicated. All downlights are to satisfy Parts B, E and Lof the building regs and are to be installed by a competent electrical contractor inaccordance with current IEE regulations.All electrical work is to be carefully installed to ensure compliance with the provisions ofbuilding regs Part P (electrical safety) to be designed, installed, inspected and tested bya qualified electrician being registered with an DCLG recognised competent person 'selfcertification scheme'Upon satisfactory completion of the works the building control officer is to be providedwith a copy of an appropriate BS 7671 electrical installation certificate issued by theelectrical contractor

Contractor to allow for new electrical installation within new extension on both floors.Position of sockets and switches to be agreed with client prior to installation. Newen-suite shower room to have mechanical extract ducted to outside air.Provide mains wired smoke detection at each level in positions shown on the proposedplans. Detectors to be interlinked and fitted in accordance with building controlrequirements.

CONC. STRIP FOOTINGS - DEPTHTO SUIT LOCAL GROUNDCONDITIONS AND TO LABUILDING INSPECTOR APPROVAL

LEAN MIX CONC. CAVITY FILLCLASS A BLOCKWORK BELOWGROUND LEVEL

GROUND FLOORNew floor to comprise 150 mm float finish, with perimeter expansion & contraction joints & reinforcement in accordance withStructural Eng. instructions & details. Kingspan Thermafloor TF73 composite insulation to achieve U value 0.22 w/m2k Conc. Slab todry out fully before any insulation is laid, level slab with Sand blinding as required, to ensure composite insulation & T & G bonded Bd.is continuously supported, TF73 to be laid strictly in accordance with manufactures instructions. Conc. Slab on 1200 gauge visqueendpm (lapped into damp proofing system at wall perimeter) on sand blinding on 150mm well compacted hardcore base. Provide edgeperimeter insulation to prevent cold bridging and ensure wall insulation overlaps the floor insulation by 200mm

First floor to comprise 195x47mm swd treated and tanalised C16 floor joists at 400 mm ctrs. Provide 100mm sound deadening quilt(Rockwool RW2 or similar approved) between joists.Provide and fix 22mm t&g swd floorboards to new extension to match exstg. (Ensure floor levels are consistent with the exstg house).Double up floor joists under new timber stud walls.

New roof construction to comprise roof slates / Tiles to match exstg on 38x25mm swd pre- treated tanalised battens fixed throughsarking breathable membrane over new swd pre-treated Rafters in accordance with structural engineers details.Note: Horizontal lap between runs of sarking membrane to be sealed using with 75mm wide double sided acrylic adhesive tape.Provide eaves ventilation tray and fascia grill unit nailed to the fascia board to give continuous 25mm air gap. Adjust & connect newroof into exg. Roof, rpair & make good. Ensure cross ventilation is maintained with new and existing roofand complies with current building regs document Part F (ventilation)

Supply and lay 300mm rockwool glassfibre roof insulation quilt between and over new ceiling joists all to achieve U value of 0.16w/m2k.

New steel beams over inaccordance with structuralengineers details

New timber post to supporthip, valley and ridge

New hi

p raft

er

New valley

New ridge board

New roof built up off exstgrafters

Extg

hip

All new rafters 50x150 C16 @600ctrs

svp

rwp

rwp

span ofjoists

span ofjoists

A

A

B B

Wall to be removed / beam oversubject to S.E. requirements

rad

rad

rad

rad

rad

rad

rad

Heating to Kitchen areato be agreed with client

B.I.G.

svp

Kitchen units indicative only

extg manhole

rwp

Hatched area denotes extg timber floor tobe removed and new concrete floor laid asspecified

New bay window in extg wall with newbeams over and new foundation slab inaccordance with Structural Engineersdetails

Contractor to make good all external areasdisturbed by the works and repair anydamaged areas

Extg roof

Extg roof

Contractor to allow for thesupply and fitting of alllight fittings and switchesto clients requirements

rwp

New timber roof construction as noted.For rafter sizes refer to Structural Enginneers details

Minimum periods of fire resistance toelements of structure to be 1/2 hour.

New inner wall to be 100mm solid concrete ( 7n/mm)strength built off new steel beam, 2ct plaster finish eachside, p.c. reinforced cocnrete lintols over door opening min150mm end bearing.

11

Timber post to StructuralEngineers detail

Provide eaves ventilationas noted

100mm blockwork wall,plaster both sides

Wallplate secured to wall top using galvanised mildsteel holding down straps ( min section 30 x 5mm) @1200 cts fixed down wall min 3 block courses. Fitalso roof holding down straps @ max 1200 ctssecuring rafters and wallplate

Insulation asnoted

Extg svp to beremove, blank offdrain.

Build in new external walls abuttingroofs, cavity trays, flashings andsoakers fixed in accordance with LeadAssociation details / recommendations

Provide and fix cavitytray @ roof abutmentand all leadn flashingsas required.

SD

HD

L 1

O/Sidelight

D/S

D/S

D/S

D/S

D/SD/S

D/S D/S

D/SD/S

P

P

sd

rad

Roof to single storey extension is to be covered in sheetmarine ply board fixed in accordance with structuralengineers details and recommendations.

Supply and install new en-suitr bathroom(colour white) spec tba. Form tiled shelf andside panels each end of bath. Provide all newhot and cold water supplies and wasteoutlets. Provide and fix tiled floor on electricu/floor heating on flexible adhesive on 6mmmarmox board securely fixed to exstg.

New SVP within recess, providetiled shelf over, vent todischarge min 900mm abovewindow head and to outside air.Make modifications to roof asnecessary to accommodate svp

Form new door opening, rc lintolover. New door, linings andarchitraves. Make good to allareas disturbed

Supply and install chrome towelladder radiator (1000x600) withchrome pipe and fixings

Exstg door to be removed andinfill opening in swd framework,p/board and skim plaster finish.Infill void with sound deadeningquilt

Supply and install newsanitaryware (colour white)spec tba. Form tiled shelf andside panels . Allow for all newh&c water connections and allwsste outlets

Contractor to allow for trimmingexstg floor joists withinbathroom to allow for new soilpipe from wc

Note: Contractor to allow for allnew doors (swd panelled),linings, architraves and skirtingsthroughout

W/GF/01

W/GF/02

W/GF/03

W/GF/04

W/GF/05

W/FF/01

W/FF/02

W/FF/03

W/FF/04

W/FF/05

W/FF/06

W/FF/07W/FF/08

rad

New roof to main extension tocomprise Redland Rosemary tiles(or simila approved) to matchexstg, minimum pitch 35 deg,fixed in accordance withmanufacturers instructions andrecommendations

New roof construction to singlestorey extension to be RedlandMini Stonewold concrete slate orsimilar approved, colourterracotta, minimum roof pitch17.5 deg at 100mm headlap on38x25mm swd pre-treatedtanalised battens fixed throughbreathable membrane over new175x50mm swd pre-treated raftersin accordance with structuralengineers details. Provide eavesventilation tray and fascia grill unitnailed to fascia board to givecontinuous 25mm air gap

New

dra

inag

e ru

n

New big and drainage run toconnect into exstg

New big and drainage run toconnect into exstg

rwp

rwp

New rw outlets to connect into newsoakaway (min 5m away from house) ifdeemed practical and if ground conditionsare suitable. This is to be discussed with LAbuilding control officer upon excavation

Rev A March 2008Rainwater drainage to soakawaysRoof tile spec / roof pitch added (HBC)Drainage alterations

rev A

New rw outlets to connect into newsoakaway (min 5m away from house) ifdeemed practical and if ground conditionsare suitable. This is to be discussed with LAbuilding control officer upon excavation

architectural portfolio

Documents