appendices to undergraduate students’...
TRANSCRIPT
APPENDICES to UNDERGRADUATE STUDENTS’ GUIDE
Revised: October 2017
Version 1.4
2017/2018
CONTACT INFORMATION
TABLE OF CONTENTS
APPENDIX A .......................................................................................................................................................... 1
AIMS AND EXPECTED LEARNING OUTCOMES OF THE DEPARTMENT’S BSc PROGRAMMES: ............... 1
MECHANICAL ENGINEERING .......................................................................................................................... 2
AIMS............................................................................................................................................................... 2
EXPECTED LEARNING OUTCOMES/OUTPUTS ......................................................................................... 3
INDUSTRIAL ENGINEERING ............................................................................................................................ 4
AIMS............................................................................................................................................................... 4
EXPECTED LEARNING OUTCOMES/OUTPUTS ......................................................................................... 4
MECHANICAL ENGINEERING (MINOR IN BIOSYSTEMS) .............................................................................. 5
AIMS............................................................................................................................................................... 5
EXPECTED LEARNING OUTCOME/OUTPUTS ........................................................................................... 6
APPENDIX B .......................................................................................................................................................... 7
TUTOR – TUTEE LISTING ................................................................................................................................. 7
APPENDIX C ........................................................................................................................................................ 14
HELP DESK & BRIDGING COURSES SCHEDULES ...................................................................................... 14
APPENDIX D ........................................................................................................................................................ 14
SOFTWARE PACKAGES – DOWNLOAD INSTRUCTIONS ............................................................................ 14
Student Version of MATLAB ......................................................................................................................... 23
MATLAB Student (unbundled) ...................................................................................................................... 23
MATLAB and Simulink Student Suite ........................................................................................................... 23
Update to MATLAB .................................................................................................................................... 25
AutoDesk Products for student use .............................................................................................................. 26
Student Version of SolidWorks: .................................................................................................................... 29
Student Version of MasterCAM: ................................................................................................................... 30
Student Version of Arena: ............................................................................................................................ 32
SOFTWARE PURCHASE LINKS ................................................................................................................. 33
APPENDIX E ........................................................................................................................................................ 34
STUDENT CHAPTERS .................................................................................................................................... 35
APPENDIX F......................................................................................................................................................... 36
ORIENTATION & ACADEMIC ADVISING SCHEDULE ................................................................................... 36
APPENDIX G ........................................................................................................................................................ 44
LEVEL THREE SCHEDULE ............................................................................................................................. 44
Mechanical Engineering Level 3 Course Listing .............................................................................................. 45
Industrial Engineering Level 3 Course Listing ................................................................................................. 46
Mechanical Engineering with a Minor in Biosystems Level 3 Course Listing ............................................... 46
APPENDIX H ........................................................................................................................................................ 47
COURSEWORK CALENDAR ........................................................................................................................... 47
APPENDIX I .......................................................................................................................................................... 49
IMPORTANT DEPARTMENTAL CONTACT INFORMATION .......................................................................... 49
1
APPENDIX A
AIMS AND EXPECTED LEARNING OUTCOMES OF THE DEPARTMENT’S BSc PROGRAMMES:
- BSc MECHANICAL ENGINEERING
- BSc INDUSTRIAL ENGINEERING
- BSc MECHANICAL ENGINEERING with MINOR IN BIOSYSTEMS
2
MECHANICAL ENGINEERING
AIMS
To provide students with a core engineering educational base in the first two years through an
integration of subject material including engineering analysis and design in such
courses/modules as the following:
• Engineering Materials, Mechanics & Machines,
• Thermodynamics and Heat Transfer,
• Instrumentation and Controls,
• Manufacturing Processes and Systems,
• Design, which is a thread that runs through the length of the programme, starting
at Level 1 with Engineering Graphics, Drawing and Design, continuing
throughout Level 2, leading to Product Design and Development, CAD/CAM and
Final Year Projects at Level 3.
• Support courses in Mathematics, Computing, Fluid Mechanics and Electrical Energy
Systems, which are provided by Other Departments, in consultation with the Department
of Mechanical and Manufacturing Engineering.
To provide breadth and depth in the final year of the Bachelor's degree programmes through
exposure to such areas as: Business and Management, Power Plant Engineering, HVAC
Systems, Component/Product Design and Manufacturing, Maintenance, Health & Safety and
Production Operations. Students may opt to serve the Agro Industrial Sector of the region by
selecting courses for the Minor in Biosystems Engineering offered by the Department.
To provide students with the opportunity to develop their skills in project management, problem
solving, investigation and technical report writing, through a major project, which also
integrates various other subject areas in the programme.
3
EXPECTED LEARNING OUTCOMES/OUTPUTS
Mechanical Engineering Graduates should be able to:
Have acquired the knowledge base that makes them versatile for employment in a wide range
of industries, through a selection of courses in the final year that build upon the first and second
years for coherent specialisation to operate effectively in one or more of the
industrial/economic sectors of the Caribbean:
• Utilities (electricity generation, water and sewerage).
• Oil, Gas and Petrochemical industries, particularly in Trinidad and Tobago.
• Other Process Industries.
• Bauxite and Mining Industries, in Jamaica and Guyana particularly.
• Iron and Steel and downstream industries.
• The Agri/Food Industrial Sector.
• Manufacturing.
• Construction (Fabrication, Building Services etc.).
• Transportation.
• Other Engineering Industries.
• Industrial Planning and Development in the Private and Public Sectors.
The Mechanical Engineering Graduate should be able to:
• Design basic mechanical components, products and systems.
• Fabricate/manufacture components and products.
• Operate and maintain mechanical and production systems.
• Troubleshoot and develop appropriate solutions to mechanical components,
products and systems.
• Be oriented towards positions of supervisory, middle and senior level management
through courses in Business and Management and to participate in decision making
in multi-disciplinary project teams.
4
INDUSTRIAL ENGINEERING
AIMS
The aim of the Industrial Engineering programme is to produce engineers, with broad-based
knowledge and skills in production and service-oriented systems, who are capable of dealing
with the design, analysis, operation, control and improvement of the systems, which provide
goods and services to our society.
The programme provides a sound background in technical topics in the first two years as well
as the necessary non-technical subject areas. In the third year the students are introduced to
a variety of concepts, tools and techniques in Industrial Engineering and Management,
students also undertake a major project to demonstrate their ability to apply the knowledge
and skills acquired throughout the programme to develop solutions to real-world problems.
EXPECTED LEARNING OUTCOMES/OUTPUTS
Industrial Engineering Graduates should be able to:
• Formulate and analyze problems, then synthesize and develop appropriate solutions
and improvements to production operations.
• Design and operate effective systems and procedures for using the basic resources of
production (people, materials, machines and capital) in organizations.
• Function in a wide range of industrial organizations such as banks, regulatory agencies
and other institutions in the context of techno-economic evaluations, project
management and systems implementation.
Industrial Engineers are more oriented to the interaction between components of a system
rather than the individual components themselves. Their professional training is such that they
can function effectively in a wide variety of positions in manufacturing, production and the
service industries.
5
MECHANICAL ENGINEERING (MINOR IN BIOSYSTEMS)
AIMS
To orient Mechanical Engineers towards operations and problem-solving activities in the
agricultural, environmental and food production sectors in the following areas:
• Ensuring a certain level of food security in the region.
• Increasing the efficiency and productivity of agriculturists and related land users
through the application of engineering principles, methods and technologies.
• Raising the awareness of rural socio-economic issues in the territories in the
Caribbean, by the inclusion in the courses, of some of the cultural practices and
income-earning activities of urban and rural sectors of the region. The studies extend
to agriculture and to some extent, environment, horticulture, forestry and fisheries,
including aquaculture, in the taught courses or in Final Year Projects.
• Increasing the general awareness of the need for efficient use of limited land and water
resources of the Caribbean as well as protecting those resources.
• Advancing the body of knowledge required for the above through research leading to
the M.Sc., M.Phil and Ph.D. degrees in the three main areas – Soil and Water
Engineering, Post-Harvest Storage and Food Processing and Production Systems and
Mechanization and Equipment/Tool Design.
Students may opt for the “full” Minor, which consists of the Final Year Project plus at least five
(5) other Level 3 courses in the Biosystems Engineering area. Students may choose the
courses that enable them to concentrate on the main areas of the Minor described in the last
paragraph. The courses in the Minor were selected to make the student as useful and flexible
as possible in aspects of Biosystems Engineering without compromising the overall
Mechanical Engineering content of the degree. Most of the courses in the Minor are coded
MENG so that other Mechanical Engineering students interested in them could take them as
electives within the basic B.Sc. Mechanical Engineering Programme.
6
EXPECTED LEARNING OUTCOME/OUTPUTS
Mechanical Engineering Graduates with the Minor in Biosystems should be able to:
• Function competently and effectively as Mechanical Engineers within any type of
organization, private or public or as individual entrepreneurs.
• Work effectively within multi-disciplinary teams in agriculture or agro-business
enterprises in food/feed storage, in handling and processing of crops and foods, in soil
and water and environmental engineering or rural engineering, or in other related
fields, bringing to the team the ability to apply engineering knowledge, skills and
techniques to solving problems in those areas. Such areas may include design,
operation and maintenance of engineering systems used in agriculture and food
production, environment and processing.
• Start his/her own enterprise to offer services/products, which bridge the various areas
of study, to governments, other enterprises or to the public directly.
• Acquire sufficient knowledge and ability to enter and successfully complete any
Graduate Studies Programme leading to higher degree(s) in the fields of Mechanical
or Manufacturing Engineering, Agricultural/Biological/ Environmental Engineering or
Engineering Management, as well as other fields.
ALL GRADUATES of the Department of Mechanical and Manufacturing Engineering should
be able to:
• Understand the importance of the human element and teamwork in design, analysis,
execution and management.
• Collect, evaluate and present data and clearly communicate results, ideas,
conclusions/recommendations and instructions orally and in writing.
• Demonstrate professional, ethical, environmental and societal responsibilities.
• Recognize the need for life-long learning and professional development.
7
APPENDIX B
TUTOR – TUTEE LISTING
2017 / 2018
8
TUTOR CONTACT INFORMATION
TUTOR EMAIL ADDRESS PHONE NUMBER LOCATION
Professor Boppana V. Chowdary [email protected] 868-662-2002 ext 82170 Block 1, second floor, room no: 208
Dr. Anthony Adeyanju [email protected] 868-662-2002 ext 83192 Block 1, second floor, room no: 231
Dr. Richard Bachoo [email protected] 868-662-2002 ext 83168 Block 1, second floor, room no: 213
Dr. Cilla Benjamin [email protected] 868-662-2002 ext 83167 Block 1, second floor, room no: 212
Mr. Robert Birch [email protected] 868-662-2002 ext 83176 Block 1, second floor, room no: 219
Dr. Jacqueline Bridge [email protected] 868-662-2002 ext 83166 Block 1, second floor, room no: 211
Ms. Ayanna De Noon [email protected] 868-662-2002 ext 83170 Block 1, second floor, room no: 215
Professor Edwin Ekwue [email protected] 868-662-2002 Ext. 82072 Block 1, second floor, room no: 218
Dr. Ruel Ellis [email protected] 868-662-2002 ext 83169 Block 1, second floor, room no: 214
Mr. Kishore Jhagroo [email protected] 868-662-2002 ext 83494 Block 1, second floor, room no: 232
Dr. Graham King [email protected] 868-662-2002 ext 83187 Block 1, second floor, room no: 236
Ms. Ambika Koonj-Beharry [email protected] 868-662-2002 ext 83170 Block 1, second floor, room no: 215
Dr. Terrence Lalla [email protected] 868-662-2002 ext 83186 Block 1, second floor, room no: 237
Professor Winston G. Lewis [email protected] 868-662-2002 ext. 83181 Block 1, second floor, room no: 224
Dr. Krishpersad Manohar [email protected] 868-662-2002 ext 83190 Block 1, second floor, room no: 233
Dr. Kuldeep Ojha [email protected] 868-662-2002 ext 82060 Block 1, second floor, room no: 235
Professor Kit-Fai Pun [email protected] 868-662-2002 ext 82003 Block 1, second floor, room no: 238/9
Mr. Fahraz Ali [email protected] 868-662-2002 ext 82170 Block 1, second floor, room no: 228
Mr. Jainarine Bansee [email protected] 868-662-2002 ext 82170 Block 1, second floor, room no: 229
Mr. Sennen Matabadal [email protected] 868-662-2002 ext 83171 Block 1, second floor, room no: 216
Dr. Renique Murray [email protected] 868-662-2002 ext 83173 Block 1, second floor, room no: 204
9
LEVEL 1
STUDENT ID TUTOR
04746803 Dr. Cilla Benjamin
415001135 Professor Edwin Ekwue
620094507 Mr. Jainarine Bansee
809100359 Professor Boppana V. Chowdary
810000192 Professor Boppana V. Chowdary
813000268 Professor Edwin Ekwue
813117584 Mr. Robert Birch
815007410 Mr. Fahraz Ali
815007410 Professor Winston G. Lewis
815007711 Mr. Fahraz Ali
815008044 Dr. Richard Bachoo
815008059 Dr. Cilla Benjamin
815008343 Professor Kit-Fai Pun
815011042 Professor Winston G. Lewis
815011603 Ms. Ambika Koonj-Beharry
815117300 Professor Edwin Ekwue
815117457 Dr. Anthony Adeyanju
816000067 Professor Winston G. Lewis
816000108 Mr. Fahraz Ali
816000336 Dr. Richard Bachoo
816000353 Dr. Graham King
816000356 Dr. Renique Murray
816000487 Mr. Jainarine Bansee
816000833 Ms. Ambika Koonj-Beharry
816001069 Professor Winston G. Lewis
816001582 Dr. Graham King
816001655 Dr. Cilla Benjamin
816001845 Ms. Ayanna De Noon
816002011 Mr. Robert Birch
816002067 Dr. Cilla Benjamin
816002100 Dr. Graham King
816002269 Dr. Krishpersad Manohar
816002460 Dr. Graham King
816002480 Dr. Cilla Benjamin
816002588 Professor Edwin Ekwue
816002603 Dr. Kuldeep Ojha
816002715 Ms. Ayanna De Noon
816002840 Professor Kit-Fai Pun
816003088 Dr. Richard Bachoo
816003152 Dr. Anthony Adeyanju
10
LEVEL 1
STUDENT ID TUTOR
816003199 Dr. Anthony Adeyanju
816003306 Ms. Ayanna De Noon
816003664 Mr. Jainarine Bansee
816004021 Professor Kit-Fai Pun
816004300 Dr. Kuldeep Ojha
816004561 Mr. Jainarine Bansee
816004573 Dr. Krishpersad Manohar
816004631 Mr. Jainarine Bansee
816005128 Ms. Ayanna De Noon
816005477 Dr. Graham King
816005505 Dr. Ruel Ellis
816006566 Ms. Ambika Koonj-Beharry
816006637 Mr. Kishore Jhagroo
816006679 Professor Boppana V. Chowdary
816006694 Mr. Sennen Matabadal
816006769 Mr. Kishore Jhagroo
816006806 Professor Boppana V. Chowdary
816006812 Mr. Robert Birch
816006826 Dr. Graham King
816006854 Dr. Kuldeep Ojha
816006928 Mr. Robert Birch
816006933 Ms. Ambika Koonj-Beharry
816006996 Mr. Kishore Jhagroo
816007083 Dr. Terrence Lalla
816007086 Dr. Richard Bachoo
816007124 Professor Winston G. Lewis
816007147 Ms. Ayanna De Noon
816007166 Mr. Jainarine Bansee
816007242 Professor Winston G. Lewis
816007243 Dr. Anthony Adeyanju
816007315 Mr. Jainarine Bansee
816007366 Ms. Ambika Koonj-Beharry
816007389 Mr. Fahraz Ali
816007393 Dr. Kuldeep Ojha
816007422 Dr. Krishpersad Manohar
816007426 Ms. Ayanna De Noon
816007487 Dr. Krishpersad Manohar
816007521 Mr. Jainarine Bansee
816007527 Dr. Cilla Benjamin
816007556 Dr. Ruel Ellis
11
LEVEL 1
STUDENT ID TUTOR
816007586 Mr. Kishore Jhagroo
816007595 Professor Winston G. Lewis
816007664 Dr. Kuldeep Ojha
816007761 Mr. Sennen Matabadal
816007766 Mr. Fahraz Ali
816007772 Professor Boppana V. Chowdary
816007797 Ms. Ayanna De Noon
816007821 Dr. Kuldeep Ojha
816007858 Ms. Ambika Koonj-Beharry
816007878 Dr. Kuldeep Ojha
816007896 Ms. Ayanna De Noon
816007960 Professor Kit-Fai Pun
816007972 Mr. Kishore Jhagroo
816008026 Dr. Anthony Adeyanju
816008053 Dr. Ruel Ellis
816008062 Professor Winston G. Lewis
816008134 Dr. Cilla Benjamin
816008208 Dr. Ruel Ellis
816008307 Mr. Jainarine Bansee
816008330 Dr. Renique Murray
816008638 Mr. Fahraz Ali
816008766 Mr. Kishore Jhagroo
816008795 Mr. Sennen Matabadal
816008865 Mr. Kishore Jhagroo
816008870 Mr. Jainarine Bansee
816008938 Dr. Terrence Lalla
816009002 Professor Edwin Ekwue
816009077 Dr. Renique Murray
816009152 Dr. Krishpersad Manohar
816009184 Mr. Robert Birch
816009331 Mr. Sennen Matabadal
816009373 Ms. Ambika Koonj-Beharry
816009570 Mr. Jainarine Bansee
816009601 Dr. Graham King
816009732 Dr. Richard Bachoo
816009756 Mr. Fahraz Ali
816009791 Professor Kit-Fai Pun
816009817 Dr. Graham King
816009886 Ms. Ayanna De Noon
816010045 Dr. Ruel Ellis
12
LEVEL 1
STUDENT ID TUTOR
816010052 Mr. Kishore Jhagroo
816010085 Dr. Jacqueline Bridge
816010173 Ms. Ayanna De Noon
816010192 Dr. Terrence Lalla
816010202 Mr. Sennen Matabadal
816010335 Professor Winston G. Lewis
816010337 Ms. Ambika Koonj-Beharry
816010379 Mr. Fahraz Ali
816010473 Mr. Jainarine Bansee
816010576 Professor Kit-Fai Pun
816010577 Ms. Ambika Koonj-Beharry
816010578 Ms. Ambika Koonj-Beharry
816010918 Dr. Anthony Adeyanju
816010961 Mr. Sennen Matabadal
816011027 Dr. Krishpersad Manohar
816011158 Mr. Kishore Jhagroo
816011289 Dr. Kuldeep Ojha
816011333 Mr. Sennen Matabadal
816011510 Ms. Ayanna De Noon
816011676 Dr. Renique Murray
816117515 Dr. Ruel Ellis
816117567 Professor Kit-Fai Pun
816117574 Mr. Sennen Matabadal
13
LEVEL 2
STUDENT ID TUTOR
414002432 Professor Boppana V. Chowdary
415000520 Ms. Ambika Koonj-Beharry
810001190 Dr. Graham King
810006474 Dr. Anthony Adeyanju
811100877 Ms. Ambika Koonj-Beharry
812001182 Dr. Terrence Lalla
812001226 Dr. Richard Bachoo
813000378 Mr. Fahraz Ali
813001058 Dr. Cilla Benjamin
813001162 Mr. Robert Birch
813001667 Dr. Jacqueline Bridge
813001995 Ms. Ayanna De Noon
813002157 Professor Edwin Ekwue
813002337 Dr. Ruel Ellis
813002920 Mr. Kishore Jhagroo
813004002 Dr. Graham King
813117392 Ms. Ambika Koonj-Beharry
813117451 Dr. Terrence Lalla
813117570 Professor Winston G. Lewis
814000117 Dr. Krishpersad Manohar
814000174 Mr. Jainarine Bansee
814000640 Dr. Ruel Ellis
814001177 Ms. Ayanna De Noon
814001574 Professor Winston G. Lewis
814002496 Dr. Krishpersad Manohar
814004270 Dr. Kuldeep Ojha
814004758 Professor Kit-Fai Pun
814005499 Mr. Kishore Jhagroo
814005516 Dr. Anthony Adeyanju
814005547 Mr. Fahraz Ali
814117277 Mr. Fahraz Ali
814117668 Dr. Cilla Benjamin
815006001 Mr. Jainarine Bansee
815006052 Mr. Sennen Matabadal
815006331 Dr. Kuldeep Ojha
815006340 Dr. Renique Murray
815006410 Mr. Fahraz Ali
14
LEVEL 2
STUDENT ID TUTOR
815006555 Dr. Jacqueline Bridge
815006564 Dr. Ruel Ellis
815006819 Mr. Fahraz Ali
815006820 Ms. Ayanna De Noon
815006944 Mr. Sennen Matabadal
815006960 Professor Boppana V. Chowdary
815006963 Professor Winston G. Lewis
815007019 Professor Kit-Fai Pun
815007027 Ms. Ayanna De Noon
815007040 Mr. Kishore Jhagroo
815007413 Professor Boppana V. Chowdary
815007435 Dr. Anthony Adeyanju
815007650 Dr. Krishpersad Manohar
815007682 Dr. Richard Bachoo
815007685 Professor Edwin Ekwue
815007717 Ms. Ayanna De Noon
815007922 Mr. Robert Birch
815008002 Dr. Terrence Lalla
815008061 Professor Kit-Fai Pun
815008242 Mr. Kishore Jhagroo
815008410 Professor Kit-Fai Pun
815008552 Dr. Anthony Adeyanju
815008947 Dr. Kuldeep Ojha
815009703 Mr. Jainarine Bansee
815010804 Ms. Ambika Koonj-Beharry
815117486 Dr. Cilla Benjamin
816000318 Dr. Ruel Ellis
816000397 Mr. Fahraz Ali
816000424 Mr. Jainarine Bansee
816000499 Mr. Sennen Matabadal
816000737 Dr. Cilla Benjamin
816000773 Mr. Fahraz Ali
816000830 Professor Boppana V. Chowdary
816000890 Professor Winston G. Lewis
816000897 Professor Boppana V. Chowdary
816001034 Dr. Anthony Adeyanju
816001057 Dr. Graham King
816001123 Dr. Cilla Benjamin
816001170 Mr. Robert Birch
816001199 Mr. Kishore Jhagroo
15
LEVEL 2
STUDENT ID TUTOR
816001223 Dr. Kuldeep Ojha
816001295 Dr. Richard Bachoo
816001474 Mr. Sennen Matabadal
816001510 Mr. Jainarine Bansee
816001513 Dr. Jacqueline Bridge
816001614 Dr. Ruel Ellis
816001658 Professor Kit-Fai Pun
816001833 Dr. Graham King
816001881 Ms. Ayanna De Noon
816001952 Mr. Sennen Matabadal
816002162 Dr. Krishpersad Manohar
816002215 Mr. Fahraz Ali
816002239 Professor Winston G. Lewis
816002357 Professor Boppana V. Chowdary
816002437 Ms. Ambika Koonj-Beharry
816002774 Mr. Robert Birch
816002883 Dr. Krishpersad Manohar
816002889 Mr. Fahraz Ali
816003009 Professor Kit-Fai Pun
816003046 Ms. Ayanna De Noon
816003089 Dr. Renique Murray
816003364 Mr. Kishore Jhagroo
816003567 Dr. Terrence Lalla
816003728 Professor Edwin Ekwue
816003792 Professor Boppana V. Chowdary
816003795 Dr. Kuldeep Ojha
816004150 Ms. Ambika Koonj-Beharry
816004866 Dr. Renique Murray
816117269 Dr. Richard Bachoo
816117272 Mr. Sennen Matabadal
816117273 Dr. Kuldeep Ojha
816117356 Professor Boppana V. Chowdary
816117480 Mr. Kishore Jhagroo
816117488 Dr. Kuldeep Ojha
816117520 Dr. Ruel Ellis
816117549 Dr. Renique Murray
816117554 Professor Kit-Fai Pun
816117565 Dr. Krishpersad Manohar
16
LEVEL 3
STUDENT ID TUTOR
813117209 Dr. Anthony Adeyanju
814002629 Dr. Anthony Adeyanju
815007456 Dr. Anthony Adeyanju
815007465 Dr. Anthony Adeyanju
815117567 Dr. Anthony Adeyanju
812117293 Dr. Cilla Benjamin
814001324 Dr. Cilla Benjamin
814002702 Dr. Cilla Benjamin
815007502 Dr. Cilla Benjamin
811100523 Dr. Graham King
813002302 Dr. Graham King
815006848 Dr. Graham King
815010251 Dr. Graham King
414000085 Dr. Jacqueline Bridge
414001560 Dr. Jacqueline Bridge
814002725 Dr. Jacqueline Bridge
814003092 Dr. Jacqueline Bridge
814004291 Dr. Jacqueline Bridge
815006156 Dr. Jacqueline Bridge
815006293 Dr. Jacqueline Bridge
815008416 Dr. Jacqueline Bridge
815008534 Dr. Jacqueline Bridge
815009740 Dr. Jacqueline Bridge
815117382 Dr. Jacqueline Bridge
811100408 Dr. Krishpersad Manohar
814000121 Dr. Krishpersad Manohar
814000506 Dr. Krishpersad Manohar
814001074 Dr. Krishpersad Manohar
814117541 Dr. Kuldeep Ojha
809001370 Dr. Renique Murray
813118069 Dr. Renique Murray
814001137 Dr. Renique Murray
814002725 Dr. Renique Murray
815006653 Dr. Renique Murray
815007024 Dr. Renique Murray
815007659 Dr. Renique Murray
815008000 Dr. Renique Murray
814000186 Dr. Richard Bachoo
815006332 Dr. Richard Bachoo
815006405 Dr. Richard Bachoo
17
LEVEL 3
STUDENT ID TUTOR
815007450 Dr. Richard Bachoo
815008048 Dr. Richard Bachoo
815008349 Dr. Richard Bachoo
815008582 Dr. Richard Bachoo
814002148 Dr. Ruel Ellis
814117753 Dr. Ruel Ellis
815007826 Dr. Ruel Ellis
808100251 Dr. Terrence Lalla
812000205 Dr. Terrence Lalla
812001769 Dr. Terrence Lalla
813003211 Dr. Terrence Lalla
814001167 Dr. Terrence Lalla
814004097 Dr. Terrence Lalla
814117261 Dr. Terrence Lalla
815117640 Dr. Terrence Lalla
815117698 Dr. Terrence Lalla
814004415 Mr. Fahraz Ali
81508599 Mr. Robert Birch
812002103 Mr. Robert Birch
813001542 Mr. Robert Birch
813006288 Mr. Robert Birch
815007073 Mr. Robert Birch
815007919 Mr. Robert Birch
815117639 Mr. Robert Birch
814000262 Mr. Sennen Matabadal
814001464 Mr. Sennen Matabadal
815009304 Ms. Ambika Koonj-Beharry
814000197 Professor Boppana V. Chowdary
815008071 Professor Boppana V. Chowdary
809006940 Professor Edwin Ekwue
813001622 Professor Edwin Ekwue
813002930 Professor Edwin Ekwue
813117002 Professor Edwin Ekwue
813117061 Professor Edwin Ekwue
814001514 Professor Edwin Ekwue
814001516 Professor Edwin Ekwue
815008623 Professor Kit-Fai Pun
815006822 Professor Winston G. Lewis
18
APPENDIX C
HELP DESK & BRIDGING COURSES SCHEDULES
2017 / 2018
19
First Year Help Desk
As you transition from secondary to tertiary education, you will notice a significant increase in
the volume and quality of work expected of you. In particular, you will notice that you have
very few one-on-one interactions with your lecturers and they expect you to have a greater
responsibility for managing your learning. To assist you in this transition, the Department of
Mechanical and Manufacturing Engineering has established the First Year Help Desk. The
Help Desk supports students in Level 1 courses by explaining subject specific content as well
as assisting students to manage their own learning process. It is available in two formats:
The Physical Helpdesk
The Physical Helpdesk is manned by postgraduate students within the Department of
Mechanical and Manufacturing Engineering. The desk is operated as per the attached
schedule. Students are encouraged to sign up for a fifteen-minute appointment with an
appropriate tutor. The timetable of the tutors and their respective specialities is attached. Drop-
ins are also welcome but individuals with appointments will be given preference during specific
timeslots. You are advised to bring any notes and other materials that are associated with your
questions – this will help the tutor to support you more effectively.
The Physical Helpdesk is located in Mechanical Engineering Labs Block (Engineering Block
4). You can see the location of the building circled in the linked UWI STA Campus map. If you
need further directions, please click on the attached link to see how to get to the Physical
Helpdesk from the Engineering Undercroft.
The Virtual Helpdesk
The Virtual Helpdesk aims to provide a forum for student support with first year Math-based
courses outside of the time barriers and the physical constraints of the University buildings. It
is implemented via piazza.com. Students may post their questions/concerns on the prescribed
discussion boards. You will receive a response to your question from one of the teaching staff
associated within one working day. Other students can also respond to the questions if
possible. If you prefer that your colleagues are not able to identify your questions or response,
then you may post anonymously. However, the teaching staff will be able to see who posted.
To enrol in the course, fill in the online google signup form at
https://goo.gl/forms/PnLgXegeScAVxyVv2. An email will be sent to you inviting you to join the
course MENG 0000 at Piazza (https://piazza.com). Follow the instructions in the email to
register; you will then be able to post your questions.
If you have further concerns, please watch this introductory video on how to upload a
question/response to the discussion board.
20
Physical Help Desk schedule for Semester 1 of the 2017-2018 academic will be updated shortly.
DAY TIME TUTOR PREFERRED DISCIPLINE
MONDAYS 12 noon – 1:00 p.m. Shreedevi Sahadeo Engineering Mathematics
1:00 – 2:00 p.m. Shivan Ramnarace Statics and Strength of Materials; Engineering Mathematics; MATLAB Programming
TUESDAYS 12 noon – 1:00 p.m. Ravi Babooram Statics and Strength of Materials; Engineering Mathematics
THURSDAYS 12 noon – 1:00 p.m. Devin Singh Statics and Strength of Materials; Engineering
Mathematics
FRIDAYS
11:00 a.m. – 12 noon Carlotta Bharat Statics and Strength of Materials
12 noon – 1:00 p.m. Chikelu Ekwue Statics and Strength of Materials; Engineering Mathematics
1:00 – 2:00 p.m. Robert Birch Statics and Strength of Materials; Engineering Mathematics; MATLAB
IMPORTANT: Please note that sometimes, staff changes occur due to other commitments, etc.
Bridging Courses schedule for the 2017-2018 academic year:
DATE TIME VENUE TOPIC INSTRUCTOR
Tuesday 05 September
2017
1:00 p.m. – 2:30 p.m. Lecture Room 1
Vectors Mr. Devin Singh
2:30 p.m. – 4:00 p.m. Differentiation Ms. Carlotta Bharat
Friday 08 September
2017
1:00 p.m. – 2:00 p.m. Room 8
Integration Ms. Michaela Arjoon
2:00 p.m. – 3:00 p.m. Trigonometry Mr. Robert Birch
IMPORTANT: Assessment will be conducted in the following week.
21
APPENDIX D
SOFTWARE PACKAGES – DOWNLOAD INSTRUCTIONS
– PURCHASE LINKS
22
Student Version of MATLAB
The student version can be obtained from going to the link http://www.mathworks.com/pricing-
licensing/index.html?intendeduse=student&prodcode=ML
Select this license if you are a student at a degree-granting institution and would like to use
MATLAB, Simulink, or add-on products to meet course requirements and for academic
research.
This license:
• Is available on the following platforms: Windows, Linux, and Macintosh.
• Is not for government, commercial, academic faculty and staff, or other organisational
use.
• Is not for profit or revenue-generating activities.
• May be used by teachers and students at primary and secondary schools.
Note that the cost is:
MATLAB US$29
MATLAB Suite $55
Add-on products $16 each
MATLAB Student (unbundled)
Includes MATLAB only for US$29.
Add-on products by area of study must be purchased separately at US $16 per module.
MATLAB and Simulink Student Suite
Includes MATLAB, Simulink, and 10 of the most widely used add-on products, as well as built-
in support for prototyping, testing, and running models on low-cost target hardware.
This costs US$55.
The modules included in this option are listed below:
• MATLAB
• Simulink
• Control Systems Toolbox
• Data Acquisition Toolbox
• DSP System Toolbox
• Image Processing Toolbox
• Instrument Control Toolbox
24
• Optimization Toolbox
• Signal Processing Toolbox
• Simulink Control Design
• Statistics and Machine Learning Toolbox
• Symbolic Math Toolbox
http://www.mathworks.com/academia/student_version/
The variety of add-ons can be found on
http://www.mathworks.com/academia/student_version/add-ons.html
25
Update to MATLAB Use the latest versions of MATLAB and Simulink and other MathWorks products to support your course work and research. The University of the West Indies offers a campus-wide license to MATLAB, Simulink, and companion products. All faculty, researchers, and students are eligible to download and install these products on their university computers as well as their personally-owned computers. Here’s a sampling of the add-on products available:
▪ Bioinformatics Toolbox ▪ Control System Toolbox ▪ Curve Fitting Toolbox ▪ Data Acquisition Toolbox ▪ DSP System Toolbox ▪ Image Processing Toolbox ▪ Instrument Control Toolbox ▪ Optimization Toolbox ▪ Parallel Computing Toolbox ▪ Signal Processing Toolbox ▪ Simscape ▪ Simscape Multibody ▪ Simulink Control Design ▪ Stateflow ▪ Statistics and Machine Learning Toolbox ▪ Symbolic Math Toolbox
Go to The University of the West Indies’ MATLAB Portal to download. Access free, self-paced training to get started in less than 2 hours: MATLAB Onramp. Commercial use of MathWorks products is not covered by our TAH license, so if you are using a commercial license, please continue to do so.
26
AutoDesk Products for student use
This can be obtained at http://www.autodesk.com/education/free-software/autocad
Make sure the machine you indeed to use meets the system requirements of the software.
https://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticl
es/System-requirements-for-AutoCAD.html
You will have to create an account on the site.
27
Please note the restrictions:
You are receiving an Educational license or entitlement for the software or service you have
chosen and it can only be used for educational purposes in accordance with the terms set
forth in the applicable software license agreement or terms of service.
Software licensed through Education Community by students or educators may only be
installed on the student’s or educator’s personal computer or devices. Software licensed
through Education Community by educational institutions may only be installed on the
educational institution’s computers or devices.
Once you have created an account and logged in go to the section of the page at the bottom
with the heading Free Resources. Under Free Software for Students click Get Software.
You will be taken to a page where you can access various AutoDesk products including
AutoCAD.
Choose the product you want to download. You will be taken to a screen to log in and provide
information on the institution (The University of the West Indies, St. Augustine campus,
address, telephone number, etc), how you intend to use the software and then you will be
allowed to download the product.
28
29
Student Version of SolidWorks:
1. Go to http://www.solidworks.com/sw/education/SDL_form.html
2. Complete the form shown. NOTE: Your lecturer or the computer lab administrator
will provide the code for the “School License ID” and/ or the “SOLIDWORKS VAR
Name”.
3. Download instructions and licensing serial number will be emailed to the address you
provide.
30
Student Version of MasterCAM:
MasterCAM Home Learning Edition Student instructions for install.
Step 1. Note the install file is on one of Engineering Student server so the student laptop will
have to be plugged into the Engineering student network, and WIFI card needs to be
disabled.
Step 2. Click on the Start button and start typing the share name as indicated at step 3.
Step 3. The share name can be typed as \\engstudentmbr05\MasterCAMHLE. If this does
not work try (4) otherwise go to step (5).
Step 4. The share name can be typed as \\192.168.26.11\MasterCAMHLE if the system
cannot find the server by name.
31
Step 5. You will most likely be prompted for a password. Ensure that you type in
sastudents\username and then complete the password.
Step 6. You can either double-click the executable to run it from the folder or copy the file to
your desktop. Note it is over 900MB in size.
32
Student Version of Arena:
1. Go to https://www.arenasimulation.com
2. Click the Download a Free Trial link
3. Complete the form shown.
4. Download link and instructions will be emailed to the address you provide.
33
SOFTWARE PURCHASE LINKS
MATLAB (Student pricing available)
https://www.mathworks.com/pricing-
licensing/index.html?intendeduse=student&prodcode=ML
AUTOCAD (Free for student use)
http://www.autodesk.com/education/home
SOLIDWORKS (Prices available for student edition)
https://store.solidworks.com/studentstore/default.php
ARENA
https://www.arenasimulation.com/academic/compare-products
34
APPENDIX E
STUDENT CHAPTERS
35
STUDENT CHAPTERS The Department of Mechanical and Manufacturing Engineering recognises the importance of Professional Engineering Institutions and has undertaken a number of initiatives to get its students involved in some of these Associations during their programme of study. During the orientation period each year senior members from the Association of Professional Engineers of Trinidad and Tobago (APETT), and the American Society of Mechanical Engineers (ASME) are invited by the Faculty to address the new and returning students on the benefits of being a member of a Professional Institution. New students are offered free student membership for one year by ASME while APETT offers free membership for all students throughout the duration of the undergraduate programmes. APETT works closely with the Engineering Students’ Society (ESS) in the Faculty of Engineering, UWI, and organises events for students such as lectures and field trips. On February 20th 2014, the UWI St. Augustine celebrated the establishment of an official Student Chapter of the Institution of Mechanical Engineers (IMechE). The Student Chapter formation was guided by IMechE Caribbean Representatives Mr Deepak Lall and Dr. Chris Maharaj. The group was formally launched when it teamed up with the local student branch of the Institute of Electrical and Electronics Engineers (IEEE) to host a technical seminar. Since then, the Chapter has been intimately involved in numerous activities including a Mechanical Engineering Networking event that had 180 student and professional participants, a technical seminar on the Responsibilities of an Engineering Manager, and a UWI Department of Mechanical and Manufacturing Engineering Student/Staff Appreciation day. In addition, the IMechE Student Chapter also launched its newsletter. The SME Student Unit launched its recruitment efforts during the orientation period of Semester I, 2015-2016 academic year. In November 2016 this Unit became registered as an official SME Student Chapter. The SME Student Chapter plans to host industry workshops/guest lectures and other interactive activities for the benefit of the students. The IMechE and SME Student Chapters collaborate on various activities and contributed an article to the first edition of the Department’s Newsletter, which detailed the goals of the group. For more information on these Professional Associations, please visit the following links or speak with your assigned Tutor/Programme Coordinator. APETT http://www.apett.org/home/ ASME https://www.asme.org/about-asme/professional-membership/benefits-forstudents IMECHE https://nearyou.imeche.org/near-you/The-Americas/Pan-CaribbeanGroup/Trinidad---Tobago/university-of-west-indies-student-chapter SME http://www.sme.org/studentzone/
36
APPENDIX F
ORIENTATION & ACADEMIC ADVISING SCHEDULE
2017 / 2018
37
ORIENTATION PROGRAMME - KNOW YOUR FACULTY
NEW STUDENTS
DATE: Monday 28th August, 2017
VENUE: Lecture Theatre 1, Block 13
TIME:
09:00 a.m. - 09:20 a.m. Dean’s Address to ALL NEW UNDERGRADUATE STUDENTS
and Introduction of Heads of Departments and Deputy
Deans –
Prof. Stephan Gift
09:20 a.m. - 09:35 a.m. Address by Deputy Dean (Undergraduate Student Affairs) -
Dr. Charisse Griffith-Charles
09:35 a.m. - 09:45 a.m. Address by Engineering Students’ Society President -
Ms. Jenelle Bernard
09:45 a.m. - 10:00 a.m. Address by Library Representative - Mrs. Mariella Pilgrim
10:00 a.m. - 10:15 a.m. Address by Student Advisory Services Representative
10.15 a.m. – 10.30 a.m. Address by Health Services Unit Representative
Departmental Activities (All New Students are asked to be seated at the locations listed
below for Departmental Orientation by 1:45pm)
Departmental Activities
TIME:
02:00 p.m. - 03:00 p.m. Address by Head of Department and Introduction of Members
of Staff
03:00 p.m. - 05:00 p.m. Departmental Consultation
VENUE: Chemical Engineering Lecture Theatre 3, Block 13
Civil Engineering Room 10, 2nd Floor, Block 2
Civil with Environmental Engineering Room 10, 2nd Floor, Block 2
Electrical & Computer Engineering Room 101, Block 1
Geomatics Room SV110, Block 10
Industrial Engineering Lecture Theatre 1, Block 13
Land Management (Valuation) Room SV110, Block 10
Mechanical Engineering Lecture Theatre 1, Block 13
Mechanical Engineering with Biosystems Lecture Theatre 1, Block 13
Petroleum Geoscience Lecture Theatre 3, Block 13
38
ORIENTATION PROGRAMME
DATE: Tuesday 29th August, 2017
YEAR 2 & 3 STUDENTS VENUE: Lecture Theatre 1, Block 13
The Programme structure is the same for Years 2 & 3
TIME:
01:00 p.m. - 01:30 p.m. Address by Dean, Prof. Stephan Gift
01:30 p.m. - 01:45 p.m. Address Engineering Students’ Society's President -
Ms. Jenelle Bernard
01:45 p.m. - 02:00 p.m. Address by International Office Representative
02:00 p.m. - 02:10 p.m. Address by Deputy Dean (Undergraduate Student Affairs) -
Dr. Charisse Griffith-Charles
TIME:
02:45 p.m. - 03:30 p.m. Departmental Semester Readiness Programme
03:30 p.m. - 04:00 p.m. Group Academic Advising (each tutor meets all of his/her
tutees as a group)
04:00 p.m. - 05:00 p.m. Registration/Approval of courses
VENUE: Chemical Engineering Personal Tutor's Office
Civil Engineering Room 10, 2nd Floor, Block 2
Civil with Environmental Engineering Room 10, 2nd Floor, Block 2
Electrical & Computer Engineering Room 101, Block 1
Geomatics Room SV110, Block 10
Industrial Engineering Lecture Theatre 1, Block 13
Land Management (Valuation) Room SV110, Block 10
Mechanical Engineering Lecture Theatre 1, Block 13
Mechanical Engineering with Biosystems Lecture Theatre 1, Block 13
Petroleum Geoscience PGSC Lecture Room, Block 7
39
Academic Advising FAQs
What is Academic Advising?
Academic Advising is a compulsory mentoring session at the beginning of Semesters I and II.
Your choice in courses will be discussed and confirmed. You will generally be unable to register if
you have not attended the session as the hold on your account will only be removed after the
document from your Academic Advising session is processed.
Which Academic Advising Session should I attend?
Academic Advising is offered at three (3) levels. For Level III, and sometimes Level II, special
sessions are offered for students on warning or students returning from Required-to-Withdraw
(RTW). Please read through this section to determine which session you are required to attend.
Level I
Level I students are students entering the department for the 1st time. All students who have to
complete a Level I course will also attend Level I Academic Advising.
Level II
All students attending Level II Advising must have completed ALL Level I courses. Students who
will attempt Level III courses but who have not completed or will not register for the Final Year
project in the current academic year will also attend Level II Academic Advising.
Level III
These are students who have completed Final Year Projects or who will register for the Final Year
Project in the current year.
How should I prepare for Academic Advising?
Before attending an Academic Advising session, you should have a good idea of the courses for
which you would register in the current semester. In fact, it is recommended that, no matter what
level you have reached, you plan your degree to its completion. Chart courses for which you will
register each semester. Be familiar with the possible streams for final year such as manufacturing,
energy and applied mechanics.
If you will not graduate in the current year, but qualify to attempt Level III courses, then you will
be guided to register for electives, rather than compulsory Level III courses.
You may not attempt courses without first having passed the relevant pre-requisite course(s).
40
What happens on the day?
Proceed to the assembly area as directed by the advising notices. You will be required to collect an
Academic Advising Form from the departmental administrative staff on duty. Fill in your
background information. Follow directions given by the administrative staff. Continuing students
seeing an advisor would be called by number.
What if I failed a course?
Failed courses MUST be repeated at the earliest opportunity. Your advisor will only discuss new
courses with you, after failed courses are selected, for that semester.
Can I take a course in Summer?
Your Academic Advisor will tell you that Summer School is ONLY for those who attempted and
failed a course in the current academic year. You may not attempt a course for the first time, in
the summer. Note that your degree status will NOT change, based on successfully passing courses
in Summer School. Good Standing, Warning, or Required-to-Withdraw status will continue to
stand.
Can I attempt an extra course?
If you have only one course to repeat, but a high GPA and overall good performance in the
programme, you may be granted the opportunity to attempt your full course load in addition to
the course your failed. Your advisor will evaluate your performance, starting from your entry into
the programme. Normally, a GPA greater than three (3) is required. You may also be asked to
satisfactorily explain your strategy for dealing with the increased course load.
Note that timetable clashes, class size restrictions, and other extenuating factors may affect
whether this request is granted.
Missing your Academic Advising Session
Academic Advising is compulsory. ALL students must attend, as scheduled, before registration. If
you, for some reason, are unable to attend your session as scheduled because of reasons such as a
delayed or cancelled flight, illness, or hospitalisation, then please contact the department or see the
Departmental Secretary at the earliest opportunity to schedule an appointment with your advisor.
39
Mechanical & Manufacturing Engineering
Academic Advising Schedule 2017-2018
A l l Y e ar 1 St uden ts
Programme Date(s) Time Venue Advisors
✓ Mechanical Engineering ✓ Mechanical Engineering with
Bio Systems ✓ Industrial Engineering
Wednesday 30th August, 2017 9:00 a.m. Room 103
Dr. A. Adeyanju
and
Dr. R. Ellis
42
Mechanical & Manufacturing Engineering
Academic Advising Schedule 2017-2018
A l l Y e ar 2 St uden ts
Programme Date(s) Time Venue Advisors
✓ Mechanical Engineering ✓ Mechanical Engineering with
Bio Systems ✓ Industrial Engineering
Wednesday 30th August, 2017
(Surnames from A – M)
and
Friday 1st September, 2017
(Surnames from N – Z)
9:00 a.m. – 12 noon 1:00 p.m. – 4:00 p.m.
and
9:00 a.m. – 12 noon
1:00 p.m. – 4:00 p.m.
Room 107
Dr. C. Benjamin
and
Dr. R. Bachoo
43
Mechanical & Manufacturing Engineering
Academic Advising Schedule 2017-2018
A l l Y e ar 3 St uden ts
Programme Date(s) Time Venue Advisors
✓ Mechanical Engineering ✓ Mechanical Engineering with
Bio Systems ✓ Industrial Engineering
Monday 28th August, 2017 Students on Warning
and Returning from RTW
and
Tuesday 29th August, 2017 All Other Students
Wednesday 30th August, 2017
All Other Students
9.00 a.m. – 1:00 p.m.
9:00 a.m. – 1:00 p.m.
9:00 a.m. – 12 noon 1:00 p.m. – 4:00 p.m.
Room 107
Dr. J. Bridge
and
Mr. R. Birch
42
APPENDIX G
LEVEL THREE SCHEDULE
45
Mechanical Engineering Level 3 Course Listing
1. Year-Long Mechanical Engineering Project (MENG 3019) (6 Credits)
Semester 1 (13/14 Credits) Semester 2 (12 to 14 Credits)
Compulsory Courses 2. MENG 3000 Engineering Management I E3 7. MENG 3016 Maintenance & Safety Engineering E3
3. ECNG 3030 Electromechanical Energy E3
Conversion (Pre-requisite: ECNG 1007)
+Thermal Engineering and Energy Systems
Any three (3) of:
4. MENG 3022 Energy Engineering E2
(Prerequisites: MENG 2007, MENG 2012)
5. MENG 3023 Environmental Control Engineering I E2
(Prerequisite: MENG 2007)
6. MENG 3025 Power Plant Engineering I E2
(Prerequisites: MENG 2007)
6. *Elective Course E2 or E3
Any four (4) of: 8. MENG 3026 Renewable Energy E2 (Prerequisite: MENG 2012) 9. MENG 3029 Environmental Control Engineering II E2
(Pre-requisite: MENG 3023)
10. MENG 3028 Power Plant Engineering II E2 (Prerequisites: MENG 3025) 11. *Elective Course E2 or E3 11. *Elective Course E2 or E3
+Engineering Mechanics and Design
4. MENG 3024 Strength of Materials II E2 (Prerequisite: MENG 2010) 5. MENG 3017 Finite Element Methods E3 in Engineering Practice 6. *Elective Course E2 or E3
8. MENG 3011 Advanced Mechanics of Solids E3 9. *Elective Course E2 10. *Elective Course E2 11. *Elective Course E2
+Manufacturing (Design Processes and Systems)
4. MENG 3013 Product Design and Development E3 5. MENG 3015 Materials Technology E2 6. *Elective Course E2 or E3
8. MENG 3014 Computer-Aided Design and Manufacture E2
9. *Elective Course E2 or E3 10. *Elective course E2 or E3 11. * Elective course E2 or E3
*Elective Courses (Compulsory for some Specialisation Streams above)
MENG 3006 Production Management E3 MENG 3022 Energy Engineering E2 (Prerequisites: MENG 2007, MENG 2012) MENG 3013 Product Design & Development E3 MENG 3015 Materials Technology E2 MENG 3023 Environmental Control Engineering I E2 (Pre-requisite: MENG 2007) MENG 3024 Strength of Materials II E2 (Prerequisite: MENG 2010) MENG 3025 Power Plant Engineering I E2 (Prerequisites: MENG 2007) MENG 3017 Finite Element Methods in E3 Engineering Practice (Prerequisites: MENG 1011, MATH 2230, MENG 2010, MENG 2012)
ENGR 3000 The Technology of the Steelpan E3 (Prerequisite: MATH 2230) MENG 3001 Engineering Management II E2 MENG 3026 Renewable Energy E2 (Prerequisite: MENG 2012) IENG 3002 Plant Layout and Material Handling E2 IENG 3006 Automation E2 MENG 3027 Traction & Power Hydraulics E2
MENG 3028 Power Plant Engineering II E2 (Prerequisites: MENG 3025) MENG 3011 Advanced Mechanics of Solids E3 (Prerequisites: MENG 3024) MENG 3029 Environmental Control Engineering II E2 (Prerequisite: MENG 3023) MENG 3014 Computer-aided Design & Manufacture E2
+ Specialisation Streams * Elective courses can be taken from the courses above or other Mechanical Engineering or Industrial Engineering Level
3 course(s) subject to the approval of the Head of Department. Some of these Elective courses are compulsory for the three Specialisation Streams as shown above.
46
Industrial Engineering Level 3 Course Listing
LEVEL 3
YEAR-LONG Industrial Engineering Project (IENG 3012) (6 Credits)
SEMESTER 1 13/14 CREDITS
Course Course Number Code Title of Credits
IENG 3000 Industrial Management E3
IENG 3005 Quality Control & Reliability Engineering E2
(Prerequisite: MATH 2250)
Together with THREE (3) courses, subject to the approval
of the Head of Department, to be chosen from:
IENG 3016 Applied Project Management E3
IENG 3015 Enterprise Information Systems E3
(Prerequisite: IENG 2004)
MENG 3015 Materials Technology E2
IENG 3017 Industrial Design of Products
and Services C3
SEMESTER 2 12/14 CREDITS
Course Course Number Code Title of Credits
IENG 3001 Production Planning & Control E3
IENG 3002 Plant Layout & Materials Handling E2
MENG 3016 Maintenance & Safety Engineering E3
Together with TWO (2) courses, subject to the approval of
the Head of Department, to be chosen from:
ENGR 3000 The Technology of the Steelpan E3
(Prerequisite: MATH 2230)
IENG 3003 Behavioural Science in Management E2
IENG 3006 Automation E2
IENG 3013 Simulation of Industrial &
Business Processes E3
Mechanical Engineering with a Minor in Biosystems Level 3 Course Listing
LEVEL 3
YEAR-LONG Mechanical Engineering Project (MENG 3019) (6 Credits)
SEMESTER 1 13 CREDITS
Course Course Number
Code Title of Credits
CVNG 3007 Environmental Engineering I E3
ECNG 3030 Electromechanical Energy Conversion E3
(Prerequisite: ECNG 1007)
MENG 3000 Engineering Management I E3
MENG 3004 Soil & Water Engineering E2
MENG 3020 Elements of Food Engineering E2
SEMESTER 2 12 CREDITS
Course Course Number
Code Title of Credits
MENG 3016 Maintenance & Safety Engineering E3
Together with FOUR (4) optional courses subject to the approval
of the Head of Department, to be chosen from:
MENG 3001 Engineering Management II E2
MENG 3002 Post-harvest Technology E2
MENG 3007 Drainage & Irrigation Engineering E2
MENG 3008 Field Machinery & Equipment E2
MENG 3027 Traction & Power Hydraulics E2
MENG 3030 Basic Engineering Infrastructure E2
47
APPENDIX H
COURSEWORK CALENDAR
48
COURSEWORK CALENDAR Students can access their Semester Coursework Calendar and Student Staff Liaison Committee meeting dates from the following link: http://sta.uwi.edu/eng/mechanical/student-resources
49
APPENDIX I
IMPORTANT DEPARTMENTAL CONTACT INFORMATION
50
POSITION NAME EMAIL OFFICE EXT
Head of Department Prof. Boppana Chowdary [email protected] Rm. 208 82171
Programme Coordinator - Mechanical Prof. Boppana Chowdary [email protected] Rm. 208 82170
Programme Coordinator - Industrial Prof. Kit Fai Pun [email protected] Rm. 239 82068
Programme Coordinator - Biosystems Prof. Edwin Ekwue [email protected] Rm. 218 82071
Secretary: Mechanical Engineering Mrs. June Noray-Charles [email protected] Rm. 208 82170
Secretary: Industrial Engineering Mrs. Ayana Waldron-Morris [email protected] Rm. 239 82068
Secretary: Mech w/ minor in Biosystems Mrs. June Noray-Charles [email protected] Rm. 208 82170
Clerical Assistant – Mechanical Engineering Ms. Nimba Wahtuse [email protected] Rm. 218 82071
Level I Coordinator Dr. Anthony Adeyanju [email protected] Rm. 231 83192
Level II Coordinator Dr. Cilla Benjamin [email protected] Rm. 212 83167
Level III Coordinator Dr. Jacqueline Bridge [email protected] Rm. 211 83166
BSc Projects Coordinator Prof. Edwin Ekwue [email protected] Rm. 218 82071
Systems Lab Manager Mrs. Paula John [email protected] Systems Lab 82375
PC Network Support Technician Mr. Navin Narine [email protected] Mechanical Engineering Computer Lab
83431
51
52