api offshore crane apr15

REACH US Today for Greater Safety, Quality, Reliability, Productivity, Profitability HRD Approved Class A Training Provider (since Year 2002). Registered with Ministry of Finance

WHATS UNIQUE ABOUT THIS COURSE?

This program has three interrelated purposes:

Firstly, to introduce students to the safe operating and inspection procedures of Offshore Class Cranes,

Secondly, to develop practical crane inspection skills with an actual crane,

And finally, to assess each students abilities through an evaluation process.

Instruction will include lectures, discussions, videos, Power-Point presentations and practical lessons

by using an actual crane.

Both learning environments will give students an overview of the offshore crane industry in generalized

terms yet also focus on the offshore crane inspector criteria outlined in API and Global standards.

API RP 2C & 2D OFFSHORE CRANE INSPECTOR QUALIFICATION PROGRAM COURSE DURATION: 7 DAYS

COURSE OBJECTIVES

At the end of the course, delegates will:

Become a "competent personnel" to inspect offshore cranes and

lifting equipment.

Be able to understand the relevant standards.

Become confident in carrying out difficult tasks.

COURSE OUTLINE

DAY 1

The Law

What is a Competent Crane Personnel, as described in Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)

The responsibility of a crane inspector

Equipment needed by the crane inspector and tools

Identifying crane parts

Safe working practices

Studying the following standards for offshore crane inspectors:

API RP 2D Operation and Maintenance of Offshore Cranes-

Sixth and Seventh Edition

API 2C Specification for Offshore Pedestal Mounted Cranes

Sixth and Seventh Edition

API 9A Specification for Wire Rope Twenty- fifth Edition,

August 2004

API RP 8B Recommended Practice for Procedures for

Inspections, Maintenance, Repair, and Re-manufacture of

Hoisting Equipment Seventh Edition, March 2002

BS 5744 Code of Practice for Safe Use of Cranes

BS EN 10204 Metallic products Types of inspection

documents 2004

ASME B30.2-2001 Overhead and Gantry cranes

ASME B30-18 2001 Stacker Cranes

BSEN 13414-1 Uniform Load method of rating for wire rope

BSEN 1492-2:2000 Webbing Slings

ASME B30-10-1999 Hooks

ASME B30-9-2000 Slings

ASME B30-1 Jacks

ASME B18-15-1998 Metric Eye Bolts

API RP 2C & 2D Offshore Crane Inspector Qualification Program

www.facebook.com/IDCTrainingHouse www.idc-training.com [email protected] +603-8061 5126 / 8061 8720

No.7, Unit 8, Jalan Industri PBP 3, Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia.

WHO SHOULD ATTEND?

QA/QC and Maintenance Personnel from Oil & Gas Companies

Government Agencies who inspect offshore cranes and overhead cranes

Third Party Inspection (TPI) companies

Companies who wish for competent staff

DAY 2 & 3

Crane maintenance and frequency for examination of cranes and hoists offshore

Continue to identify crane parts

Studying the load radius of cranes, and their safe capabilities

Safety factors of wire ropes and their construction

Examination of wire rope and possible faults during the inspection

Examination of the function of the load indicator

Looking at all safety devices on cranes and their functions

Examination of the prime mover (electrical)

Inspection of the Prime mover (Diesel powered) (including power pack) and Shut down Devices

Examination of the engine house and associated equipment.

Check the operators cabin, and the condition and its fittings.

Inspecting the winches and their function and what to look for during inspection

Boom, Main and aux hoists and associated equipment and what to look for.

Examining the gantry and A frame and fittings.

Examination of the boom and fittings during the inspection and the possible faults

Looking at the Main and Fly (Aux) block during inspection and possible faults

Examination of the Sheaves during inspection and their possible faults

What are a slew ring and its function?

Inspecting the slew area and covering the following points:-

Pinion and gear

Slew brake

Slew motor

Slew ring bolts

Slip ring ( splitter box)

Looking at ways of conducting a slew ring deflection test

Describe the reason and the importance of a deflection test

Examination of pedestal flange

Examination of pedestal welds for damage and cracks

Crane rigging

King post cranes

Examination of bearings

Examination of electrical connectors and bolts

Examination of slew gear teeth

Overhead cranes inspection and what to look for on a offshore installation




COURSE DURATION

7 Days Training

DAILY SCHEDULE

8:30am - 5:30pm

ITEMS TO BRING

Calculator

Lots of Questions

A CAN-DO Attitude

Stationeries such as pen and

highlighter will be provided.

DAY 4

Continue, Crane maintenance and frequency for examination of cranes and hoists offshore

Making inspection reports.

How to make a Thorough Examination of cranes found offshore

Looking at the criteria and grounds for rejection

Looking at grounds for a load test

Writing reports.

And a final test paper.

DAY 5

Read load charts in preparation for a 4 yearly proof test as laid down in AP 2C &D

Set up the FAT test and go through in detail

Start loose lifting Equipment inspection

DAY 6

Loose lifting equipment, and the use and frequency of inspection

Rigging practices, and looking at a lifting plan

In depth look into Chain hoist, pull lever, floor cranes and pallet truck

DAY 7

Finish off Loose lifting equipment and go through a inspection

Setting up a proof test of loose lifting equipment, including slings, chain blocks, and chain blocks

Recap on course

Final Test



COURSE DURATION

7 Days Training

DAILY SCHEDULE

9:00am - 5:00pm (Workshop)

ITEMS TO BRING

Calculator

Lots of Questions

A CAN-DO Attitude

Stationeries such as pen and

highlighter will be provided.




TRAINERS PROFILE

FRED HAWKINS

RECENT TRAININGS

Crane operator assessor offshore

Crane inspection, in house inspector training

Loose equipment inspector, in house training

Introduction to rigging

Rigger training

Banks man

Fork lift operator training

BSEN12079 container inspection

Fred Hawkins has more than 25 years experience in the

Oil & Gas and Power Industry, spanning from the United

Kingdom to the rest of the world.

He has taught in Iraq, Qatar, Libya, Malaysia and many other

countries, spending time teaching and coaching the locals. He

has also worked hands-on and management from re-building to

inspection of all types of heavy lifting equipment, which includes

onshore and offshore, port, and construction site cranes in the

USA, Middle East, and Asia.

He has been a Training Manager in the Middle East for a well

known Third Party Inspection Company. Fred has also written

many procedures on various aspects of crane building,

maintenance, and heavy lifts.

SPECIAL SKILLS

Inspector for periodical inspection & certification of Cranes

(including onshore and pedestal mounted cranes), Hoisting equipment, Lifeboat Davits & winches, Loose lifting equipment

Bollard pull test for Tug handlers

Gap analysis, specialist for all lifting equipment & cranes

FINANCE DEPARTMENT CONTACT DETAILS DISCLAIMER

Name : ________________________________ Email : ________________________________ Job Title : ________________________________

Direct Line: ______________________

1) IDC Training House Sdn Bhd reserves the right to cancel or make alternative arrangements to the course content, date, trainer, venue & course fee if the needs arise due to unforeseen circumstances.

2) Fee does not include any taxes (withholding or otherwise). In case of any taxes applicable, the client has to ensure that the taxes are paid on top of the investment fee paid for the course. Compliance with the local tax laws is the responsibility of the client.

METHOD OF PAYMENT (Please tick your preferred option)

[ ] BY CASH * 50% down payment is required in order to secure the seat. [ ] BY CREDIT CARD * 50% down payment is required in order to secure the seat. * Visa/Master card only. 2% surcharge based on total invoice value. [ ] BY CHEQUE * Made payable to IDC Training House Sdn Bhd. * Cheque payment will only be accepted if received NOT LESS than 7 working days before training date. Full prepayment via cheque will only be acknowledged upon clearance by the bank. [ ] BY BANK TRANSFER * Seat is confirmed only upon payment received with remittance slip (quoted with invoice number). * All bank charges to be borne by payer. Please ensure that IDC Training House Sdn Bhd receives the full invoiced amount.

REGISTRATION & CANCELLATION POLICY

1) Seat is confirmed only upon receiving Registration Form with Proof of Payment. Verbal or written request to reserve seat will not be entertained.

2) Any cancellation/amendment must be received in writing. Otherwise, full course fee will be charged accordingly. Verbal notice alone will not be entertained.

3) For any cancellation received in writing less than seven (7) working days prior to the course date, or no-show, client is liable to pay the full course fee and NO REFUND will be granted. Replacement of delegate to same training session is allowed at no extra charges.

4) For any cancellation received in writing NOT less than seven (7) working days prior to the course date, full refund will be granted, with less RM 150 administrative fee and any related bank or credit card charges.

5) For any postponement received in writing less than seven (7) working days of the training course, client is liable to pay 50% of course fee as a penalty on late notice.

CURRENCY BANK ACCOUNT DETAILS Account holder: IDC TRAINING HOUSE SDN BHD

[ ] MYR (Malaysian Ringgit)

Bank : Ambank (M) Berhad Account No : 091-201-200378-6 Swift No : ARBK MYKLXXX

[ ] USD (United States Dollar)

Bank : OCBC Bank (M) Berhad Account No : 786-113201-4 Swift No : OCBCMYKLXXX

To REGISTER, please EMAIL this form to [email protected] or FAX to +603-80687720 For more INFO, please call +603-8061 5126 / 8061 8720

REGISTRATION FORM

API RP 2C & 2D OFFSHORE CRANE INSPECTOR QUALIFICATION PROGRAM

DATE: 13 - 19 APR 2015 VENUE: IDC Training House, No. 7, Unit 8, Jalan Industri PBP 3,

TIME: 8:30AM 5:30PM Taman Industri Pusat Bandar Puchong, 47100 Puchong, Selangor, Malaysia.

FEE (Please tick your preferred option)

NORMAL FEE [ ] RM 6,090 / USD 2,030

(per pax)

SAVE MORE with Group Rate! (3 Pax or More)

[ ] RM 5,790 / USD 1,930 (per pax)

Prices include:

Lunches

Refreshments

Course materials

PARTICIPANT DETAILS3 AUTHORIZATION

Full Name (as per IC/Passport): ________________________________________ Email: ________________________________________ Job Title: ________________________________________

Salutation: ______________________ Mobile No.: ______________________ [ ] Self Sponsored [ ] Sponsored by Company

Signatory must be authorized to sign on behalf Name : _____________________________ Job Title : _____________________________ Signature : _____________________________ Date : _____________________________ Company Stamp:

_______________________________________ * This registration is invalid without signature & company stamp.

INVOICE DETAILS *Compulsory if sponsored by company

Attention Invoice to (HR/Training Dept.): ________________________________________ Organization Name: ________________________________________ Mailing Address (Postcode Compulsory): ________________________________________ ________________________________________ ________________________________________

Salutation : ______________________ Direct Line: ______________________ Fax : ______________________ Email : ______________________

PARTICIPANT DETAILS1



PARTICIPANT DETAILS2



api offshore crane apr15

Documents