aperture priority photo no.placementmeter setting f/stop/s.s pd describe photo quality 1in front of...
TRANSCRIPT
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe Photo Quality
1 In front of window
Matrix 2.8
Insert Picture
Backlit Situations: Set the aperture @ f/2.8 and have someone stand in front of a window in which the sun is shining. Using the 18-55mm zoom lens, take photographs and complete the next 8 slides.
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the change from Photo 1. What caused the change?
2 In front of window
Spot meter on light coming from the window
2.8
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the change from Photo 2. What caused the change?
3 In front of window
Spot meter on something dark
2.8
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the change from Photo 3. What caused the change?
4 In front of window
Matrix MeterAttach SB 600 Flash Unit
2.8
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the change from Photo 4.
5 In front of window
Spot Meter Move aperture one unit higher
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the differences from
Photo 5. 6 In front of
windowMatrix Meter Keep f/stop and
shutter the same
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the differences from Photo 6. What
causes the differences?
7 In front of window
Matrix Move f/stop to f/8
Insert Picture
Aperture PriorityAperture Priority
Photo No.
Placement
Meter Setting
f/stop/S.Spd
Describe the differences from Photo 7. What
causes the differences?
8 In front of window
Matrix Move f/stop as far as camera will allow
Insert Picture
Depth of FieldDepth of Field
Photo No.
Subject Meter Setting
f/stop/S.Spd
Describe the differences from Photo 7. What
causes the differences?
1 Isolated ObjectFocus on object
Matrix Move f/stop as low as camera will allow
What is not in focus? Why?
2 Isolated ObjectFocus on object
Matrix Move f/stop as high as camera will allow
What is not in focus? Why?
Insert Photo 1
Using the 18-55mm zoom lens, isolate a single object and position the camera so that the object is as close to the camera as possible. Be sure that there is considerable space between the isolated object and the background.
•Photo No. 1: Set the f/stop to as small a number as the camera will allow. Take the photo, ensuring that the isolated object is in focus.•Photo No. 2: Using the same lens and object, set the aperture to the largest number the camera will allow and take the same photograph.
Insert Photo 2
Questions:Questions:
The first exercise was a backlit situation. Why did the photo appear “better” when you used spot metering?
In the second exercise, tow different extremes of f/stop gave different perspectives of the same object. Explain what is happening.
Shutter PriorityShutter Priority
Photo No.
Placement
Meter Setting
f/stop/S. Spd
Describe Photo Quality
1 General Photo Matrix 1/15f/stop?
Insert Picture
Set the camera to “S” on the Mode Selector. Set the Shutter speed according to the table below. Record your observations and answer the questions below.
Shutter PriorityShutter Priority
Photo No.
Placement
Meter Setting
f/stop/S. Spd
Describe the change from
Photo 1. What caused the
change?2 General Photo Matrix 1/60
f/stop?
Insert Picture
Set the camera to “S” on the Mode Selector. Set the Shutter speed according to the table below. Record your observations and answer the questions below.
Shutter PriorityShutter Priority
Photo No.
Placement
Meter Setting
f/stop/S. Spd
Describe the change from
Photo 2. What caused the
change?3 General Photo Matrix 1/250
f/stop?
Insert Picture
Set the camera to “S” on the Mode Selector. Set the Shutter speed according to the table below. Record your observations and answer the questions below.
Shutter PriorityShutter Priority
Photo No.
Placement
Meter Setting
f/stop/S. Spd
Describe the change from
Photo 3. What caused the
change?4 General Photo Matrix 1/500
f/stop?
Insert Picture
Set the camera to “S” on the Mode Selector. Set the Shutter speed according to the table below. Record your observations and answer the questions below.
Shutter PriorityShutter Priority
Photo No.
Placement
Meter Setting
f/stop/S. Spd
Describe the change from
Photo 3. What caused the
change?5 General Photo Matrix 1/2000
f/stop?
Insert Picture
Set the camera to “S” on the Mode Selector. Set the Shutter speed according to the table below. Record your observations and answer the questions below.
Questions:Questions:
Which of the above settings is closest to the correct exposure?
Why?
What does the term “correct exposure” mean to you?
Manual PriorityManual Priority
Photo No.
Subject Meter Setting
f/stop/S.Spd
Describe the differences from Photo 7. What
causes the differences?
1 Isolated ObjectFocus on object
Matrix 1/15
f/stop chosen?
What is in focus?
What is not in focus?
2 Isolated ObjectFocus on object
Matrix f/8
Shutter Speed?
What is in focus?
What is not in focus?
Insert Photo 1
Using the 18-55mm zoom lens, isolate a single object and position the camera so that the object is as close to the camera as possible. Be sure that there is considerable space between the isolated object and the background.
•Photo No. 1: Use the 18-55mm zoom lens. Set the camera on “M” mode and the shutter speed to 1/15. Set the aperture so that the exposure is correct.•Photo No. 2: Set the f/stop to f/8 and find the shutter peed that gives the correct exposure for this photograph..
Insert Photo 2
Questions:Questions:
Each photo has a different f/stop. Are the exposures the same?
Why?
What is the difference in the photos with respect to what is in focus?
Why?
Close-Up and Close-Up and Fluorescence Fluorescence Photography Photography
Note: All close-up photography requires a tripod.
A special lens is required for close-up photography when using the D40.
Close-Up and Close-Up and Fluorescence Fluorescence Photography Photography
Open the aperture to the maximum the camera will allow.
Fit the camera with a close-up lens and set the camera on Manual “M” Priority setting. Attach the camera to a tripod.
Position the camera as close to the print as possible (in focus). Ensure that the camera body is level. Focus the camera (do not use a zoom lens). Using the shutter speed, select the correct exposure. For black powder dusted prints, take photograph using available
light. For a fluorescent powder dusted print, use an alternative light source
(ALS) to visualize the print-wear orange goggles-and fit the camera with an orange filter on the lens. Focus the camera and take the photo as above.
Close-up and Fluorescence Close-up and Fluorescence PhotographyPhotography
Photo No.
Subject Meter Setting
f/stop/S.Spd
Description
1 Black Powder Dusted Fingerprint
Matrix f stop= 2.8
Shutter Speed?
2 Fluorescent Powder Dusted Fingerprint
Matrix ff stop= 2.8
Shutter Speed?
Insert Photo 1Insert Photo 1
Using the 18-55mm zoom lens, isolate a single object and position the camera so that the object is as close to the camera as possible. Be sure that there is considerable space between the isolated object and the background.
•Photo No. 1: Use the 18-55mm zoom lens. Set the camera on “M” mode and the shutter speed to 1/15. Set the aperture so that the exposure is correct.•Photo No. 2: Set the f/stop to f/8 and find the shutter peed that gives the correct exposure for this photograph..
Insert Photo 2Insert Photo 2
Questions:Questions:
What is the close-up lens?
What do the numbers on the lens mean?
What is the purpose of the orange goggles?
Why does the camera need an orange filter over the lens?