“krupanidhi”, 9, walchand hirachand marg, ballard estate...

MAHARASHTRA SMALL SCALE INDUSTRIES DEVELOPMENT CORPORATION LTD.

(A Govt. of Maharashtra Undertaking)

“Krupanidhi”, 9, Walchand Hirachand Marg, Ballard Estate, Mumbai – 400001.

Telephone No - 022- 22611121/ 22 / 23 & 22614824

Fax No - 022-22620623 / 22614514 **************************************************************************************

TENDER FOR

FINALIZATION OF RATE CONTRACT

FOR SUPPLY OF STEEL FURNITURE

FOR THE YEAR 2014-15

TECHNICAL BID (Part-I)

(Contain Page No. 01 to Page No. 185)

Seal & signature of the tenderer 2

TENDER INDEX

Sr. No.

Contents Page No.

1 Tender Index 02 to 03

2 Product Index 04 to 08

3 Product Specifications & Drawings : Appendix No 01 09 to 127

4 Time Schedule of the Tender 128

4 Instructions to the Tenderers 129 to 131

5 Submission of the Tender 131

6 Technical Bid (Part I) 131 to 132

7 Additional documents to be submitted by the tenderer 132 to 133

8 Special Terms & Conditions of the Tender i) Submission of sample ii) Pre- despatch Inspection iii) Capability Assessment iv) Packing v) Inspection-cum-Certificate of Acceptance

(Delivery Challan) vi) Marking on Product vii) Bill of Material viii) Estimated Rates ix) List of Machinery

133 to 140

9 Specifications & Price Bid 141

10 General Terms & Conditions 141

11 MSSIDC Role 141

12 Reservation of Item 142

13 Price Variation 142

14 Manufacture of Goods 142

15 Acceptance of Tender 142

16 Acceptance of Order 142

17 Delivery of Stores 143

18 Delivery Period 143

19 Delivery Performance 143

20 Agreement & Security Deposit 144

22 Period of the Contract 144

21 Drawal of Stores 144

23 Validity of the Offer 144

24 Jurisdiction 144

25 Payment Terms 144

26 Recovery of Dues 145

27 Falls Clause 145

28 Guarantee / Warranty 145

29 Replacement of Defective Stores 145

30 Force Majeure Clause 145


Sr. No.

Contents Page No.

31 Liquidated Damages 146

32 Rebate Paid to MSSIDC 146

33 Tenderers‘ Obligation of Execution of Consignees‘ Order and Payment of Rebate Thereof

146

34 Government Directives 146

35 MSSIDC‘s supply order 146

36 Delayed Payment 146

37 Submission of the Tender 146 to 148

38 Addresses, Telephone and Fax no of MSSIDC : Appendix No.02 Head Office and Divisional Offices.

149

39 Information to be furnished by the tenderer : Appendix No.03 for capability and capacity assessment of the tenderer.

150 to 158

40 Self Declaration. : Appendix No.04 154

41 Details of Group- wise Samples to : Appendix No.05 be Submitted

155 to 159

42 Past Performance : Appendix No.06 160

43 Detailed List of Machinery Installed in the Unit : Appendix No.07 161

44 Detailed list of Employees : Appendix No.08 162

45 Undertaking From the Tenderer : Appendix No.09 163

46 Self declaration reg.non-blacklisted of unit Appendix No.11 164

47 Details of Different Modes of Online Payment : Appendix No.10 to e-Tendering Services Provider

165

48 Rate Schedule for Steel Furniture : Appendix No. A-1, A-2 , A-3

166 to 185


PRODUCT INDEX OF STEEL FURNITURE OFFICE FURNITURE & SCHOOLE FURNITURE

Sr. No.

Name of Item /Size in

Inches(approx)

Drawing No. Page No. Overall Size in mm Product specification

Page no.

1 Steel Cupboard (Major) 78Hx36xW19D

MSSIDC/RCT/SC-001

10 1980 Hx915Wx485D

13 to 15

2 Steel Cupboard Premium Quality (Major) 78Hx36Wx19D

MSSIDC/RCT/SC-001-A

11 1980 H x 915W x485D

16 to 18

3 Steel Cupboard (Minor) 59Hx30Wx18L

MSSIDC/RCT/SC-001

- 1270Hx765Wx440D

13 to 15

4 Steel Cupboard(Major) With Locker 78Hx36Wx19D

MSSIDC/RCT/SC-002

12 1980Hx915Wx485D

13 to 15

5 Steel Cupboard with Lockers 78Hx36Wx19L A) 6 Lockers B) 8 Lockers C) 12 Lockers D) 18 Lockers

MSSIDC/RCT/SCL-003

19 1980Hx910Wx480D 1980Hx910Wx480D 1980Hx910Wx480D 1980Hx910Wx480D

20 to 21

6 Filing Cabinet

A) 2 Drawers 30Hx19Wx28D

B) 3 Drawers 42Hx19Wx28D

C) 4 Drawers 54Hx19Wx28D

MSSIDC/RCT/ SF-004

22 750Hx470Wx700D 1080Hx470Wx700D

1380Hx470Wx700D

23 to 25

7 Steel Book Case 66Hx34Wx12D

MSSIDC/RCT/ SBC-005

26 1675Hx840Wx305D 27 to 28

8 Metal Shelving Rack (Open type)

1)3 Shelves 36Hx36Wx15D

MSSIDC/RCT/ MSR-006

29 to 30 900Hx900Wx375D

31 to 32


Sr. No.


Inches(approx)


Page no.

2) 6 Shelves 2Hx36Wx15D 3) 7 Shelves 84Hx36Wx15D

4) 8 shelves 96Hx36Wx15D

5) 9 Shelves 120Hx36Wx15D

800Hx900Wx375D 2100Hx900Wx375D 2400Hx900Wx375D 3000Hx900Wx375D

9 Metal Shelving Rack (Close type ) 1)3 Shelves 36Hx36Wx15D

2) 6 Shelves 72Hx36Wx15D 3) 7 Shelves 84Hx36Wx15D 4) 8 Shelves 96Hx36Wx15D 5) 9 Shelves 120Hx36Wx15D

MSSIDC/RCT/ MSR-007

33 to 34 900Hx900Wx375D 1800Hx900Wx375D 2100Hx900Wx375D 2400H900Wx375D 3000Hx900Wx375D

35 to 36

10 Steel Writing Table 1)With 1 Drawer 36Lx24Wx30H 2)With 3 Drawers 48Lx24Wx30H 3)With One Side 3 Drawers & One Side Cupboard 55Lx24Wx31H

MSSIDC/RCT SWT-008 MSSIDC/RCT/ SWT-009 MSSIDC/RCT/ SWT-010

37

40

43

900Lx600Wx750H 1200Lx600Wx750H 1370Lx760Wx750H

38 to 39

41 to 42

44 to 45


Sr. No.


Inches(approx)


Page no.

11 Steel Executive Table 64Lx35Wx30H

MSSIDC/RCT/ SET-011

46 1600Lx865Wx750H 47 to 48

12 Steel Tubular Chair ‗ K‘ Type

MSSIDC/RCT/ KTC-012

49 to 51 890 H x500 Wx500D

52 to 59

13 Steel Stool 12Lx12Wx21H

1)With Pre-laminated Top 2)With MS Sheet Top

MSSIDC/RCT/ SS-013

60 305Lx305Wx533H 305Lx305Wx533H

61 to 62

14 Steel Bench 72Lx12Wx18H 1)With Pre-laminated Top 2)With MS sheet Top

MSSIDC/RCT/ SB-014

63 1830Lx305Wx450H 1830Lx305Wx450H

64 to 65

15 Dual Desk with MS Sheet Top

1)2 Seater 40Lx36Wx30H


MSSIDC/RCT/ DD-015/ A/ B/ C/ D

66 to 70 990Lx914Wx750H 1220Lx914Wx750H

73 to 74

16 Dual Desk with Pre-laminated Top


2) 3 Seater 48Lx36Wx30H

MSSIDC/RCT/ DD-015/ A/B/ C/D

66 to 70 990Lx914Wx750H 1220Lx914Wx750H

71 to 72

17 Dual Desk with Commercial Plywood Laminated Top


MSSIDC/RCT/ DD-015/A/B/C/D

66 to 70

990Lx914Wx750H

75 to 76


Sr. No.


Inches(approx)


Page no.


1220Lx914Wx750H

18 Dual Desk with Teakwood Top

1)2 Seater 40Lx36Wx30H 2)3 Seater 48Lx36Wx30H

MSSIDC/RCT/ DD-015/A/B/ C/D

66 to 70 990Lx914Wx750H 1220Lx914Wx750H

77 to 78

19 A) Steel Hostel Cot with Waterproof Commercial Plywood Top 76Lx36Wx18H

MSSIDC/RCT/ SHC-017-A

79 1910Lx910Wx450H 80 to 81

20 Steel Safe A) Fire Resisting & Burglar Resisting 1) Single Door 19Hx14Wx12D 23Hx17Wx12D 34Hx17Wx12D 41Hx23Wx18D 74Hx30Wx23D

2) Double Door 54Hx35Wx18D 64Hx38Wx20D

B) Non-Fire Resisting & Non-Burglar Resisting

1) Single Door 21Hx18Wx13D 26Hx21Wx17D 1) Double Door 30Hx24Wx19D

MSSIDC/RCT/ SSF-018

82 to 86 470Hx340Wx290D 850Hx415Wx365D 1030Hx570Wx440D 1340Hx570Wx440D 1860Hx750Wx585D 1340Hx870Wx440D 1600Hx960Wx510D 520Hx450Wx330D 640Hx530Wx430D 760Hx600Wx480D

87 to 88

21 Double Decker / Bunker Bed 78Lx30Wx66H

MSSIDC/RCT/ BB-030

89 1950Lx785Wx1675H

90 to 91


Sr. No.


Inches(approx)


Page no.

22 Steel Office Compactor Size 2452Lx915Wx2100mmH

MSSIDC/RCT/COMP/2014-001

92 93 to 94

A) HOSPITAL FURNITURE

Sr. No.

Name of Item Drawing No. Page No.

Overall Size in mm Product Specification

Page no.

1 Bed Side Locker 16Lx16Wx30H

MSSIDC/RCT/ BSL - 2012-021

93 405Lx405Wx750H 94

2 Bed Side Screen Open96Lx70H and Close 48Lx70H

MSSIDC/RCT/ ST-2012-022

95 to 96

Open 2420Lx1730H and Close 1200Lx1730H

97

3 Saline Stand 54 to 97 maximum H

MSSIDC/RCT/ SS-2012-023

98 1370 to 2435 maximum height

99

4 Foot Step Single 18Lx9Wx9H Double 18Lx18Wx18H

MSSIDC/RCT/ FS-2012- 024

100 460Lx230Wx230H 460Lx460Wx460H

101

5 Instrument Cabinet 60Hx24Wx14D

MSSIDC/RCT/ IC- 2012-025

102 155Hx610Wx355D 103 to 104

6 Revolving Stool 12‖dia top, 22‖to32‖adjustable H

MSSIDC/RCT/ RS-2012-026

105 to 106

305 dia. Top , 550 to 800 adjustable Height

107

7 Stretcher with Trolley 79Lx22Wx32H

MSSIDC/RCT/ ST-201-027

108 2000 L x565W x 815H

109

8 Hospital Cot 79Lx36Wx24H

MSSIDC/RCT/ PHC-2012-028

110 to 111

2090Lx915Wx600H 112 to 113

9 Steel Semi-Fowler Bed 79Lx36Wx24H

MSSIDC/RCT/ SFB-2012-029

114 2090Lx915Wx600H 115 to 116

10 Steel Fowler Bed 79Lx36Wx34H

MSSIDC/RCT/ FB-2012-032

117 to 118

2090Lx915Wx600H 119 to 120

11 Steel Hospital Baby Cot 52Lx30Wx24H

MSSIDC/RCT/ BC-2012-031

121 1321Lx755Wx610H 122 to 123

12 Coir Mattress Specification no. MSSIDC/RCT/ CM-2012

- 124


Appendix No.01

DRAWINGS & SPECIFICATIONS

FOR

STEEL FURNITURE

A) OFFICE FURNITURE

B) SCHOOL FURNITURE C) HOSPITAL FURNITURE


SPECIFICATION OF STEEL CUPBOARDS

(Drawing No. MSSIDC/RCT/SC-001 & . MSSIDC/RCT/SC-002)

OVERALL SIZE:

Height (H)

mm

Width (W) / Length(L) mm

Depth (D)/ Breadth(D)

mm

Steel Cupboard (Major) 1980 915 485 Steel Cupboard (Major) with Locker

1980 915 485

Steel Cupboard (Minor) 1270 765 440 1. Steel Cupboard (Major)

Steel Cupboard (Major) having 4 shelves making 5 compartments. Metal generally conforming to IS / 3312 – 1984. The overall dimension should not vary by more than + - 5 mm.

2. Steel Cupboard (Minor)

Steel Cupboard (Minor) having 3 fixed shelves making four compartments. Metal generally conforming to IS / 3312 – 1984. The overall dimension should not vary by more than + - 5 mm.

3. Steel Cupboards ( with Locker)

Steel Cupboard (With Locker) having 4 fixed shelves making 5 compartments. One No. of locker with locking arrangement shall be provided in second compartment from the top. The dimension of the locker shall be 300mm H x 908mm W x 430mm D. The locker shall have handle made of non-corrodible material. The locker shall be fitted with lock not less than 6 lever with duplicate made of non-corrodible material. The overall dimension should not vary by more than + - 5 mm.

4. Lock Lock shall not be less than 6 lever with duplicate keys of non-corrodible material. For locking arrangement, there shall be 3 way bolting device controlled by lock and operated by brass or zinc base alloy handle.

5. Sides The sides shall be made from Mild Steel not less than 0.8 mm thick (22G)and without any burrs or dents. The width of the side sheet shall correspond to the depth of the top. The sides shall extend between the extreme surface of the top and bottom shelves.

6. Back The back shall be made from Mild Steel not less than 0.8 mm thick (22G)and without any burrs or dents. The width of the back sheet shall correspond to width of the top. The back shall extend between the extreme surface of the top and bottom shelves.

7. Top and bottom The length of the top and bottom shall cover the width of the cabinet and the breadth shall cover the depth of the cabinet. These shall be made from Mild Steel Sheet not less than 0.8 mm thick (22G)without any burrs and dents.

8. Shelves The shelves shall be made from mild steel not less than 0.8mm thick (22G).Shelves shall have lipped flanges 25mm in width and 15mm in depth. Each shelf shall be welded or shall be supported on four shelf bracket. The bracket shall be made of M.S. Sheet not less than 1.6mm thick. The bracket shall be so


designed and constructed that the shelf is securely supported and that adjustment inside the bracket can be effected easily. Four rack strips shall be provided for supporting the shelves, covering the full height of cabinet. Rack strip shall be made of mild steel and shall not be less than 1.00 mm thick.

9. Right Door This shall be formed out of mild steel sheet not less than 1.00 mm (20G) thick having metal stiffeners suitably welded or riveted to stiffen the door. The centre to centre distance between 2 adjacent hinged to the right side of the cabinet and shall have hole for the handle and a key slot for the key of the lock. The clearance around the door between the door flanges and side top and bottom flanges, shall not be more than 1.25 mm.

10.Left Door This shall be similarly constructed as the right door and hinged to the left side of the cabinet.

11. Pedestal The two pedestals shall be made from mild steel sheet not less than 1.00 mm thick and shall be properly stiffened. The pedestal shall not project out of the cabinet and shall be 125 + - 5 mm in height.

12. Hinges The hinges shall be either plain butt type made from mild steel not less than 1.6 mm thick or double folded type fabricated from mild steel sheet not less than 1.25mm thick. The hinges shall be secured to the mild steel hing bracket not less than 2.5 mm thick on one side and shall be secured to the door on the other side of the fulcrum. The number of hinges per door leaf shall be not less than two for small size and not less than three for large size.

13. Color A) Stoving Enamel Spray Paint

All dents, burrs and sharp edges shall be removed from the various components. The components shall be individually pickled, scrubbed and rinsed to remove grease, rust, scale or any other foreign element. Immediately after pickling all the mild steel parts shall be given phosphating treatment conforming to Class C of IS: 3618 – 1966 ( specification). Putty shall be applied to all surfaces requiring filling and shall conform to IS 110 – 1968.

Coats of enamel paint shall be then applied as follows : a) Finish coat with enamels conforming to IS 151 – 1950, IS

2932 – 1974 or IS 2933 – 1975 and b) In case of stoving enamel, the component shall thereafter

be baked at specified temperature in an oven heated uniformally. The finish shall be smooth and uniform with hard tough filling of enamel strongly adhering to the surface. The finish shall be free from all visible defects and shall not chip when tapped lightly with dull pointed instrument.

All components shall be finished in silver gray / TA gray / olive green / any color as per choice of the consignee. Shall be applied /painted and baked upto 80 to 120 centigrades.

The overall dimension should not vary by more than + - 5 mm.


B) Epoxy Polyester Powder coated All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing, pickling, phosphating, give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+_ 0.5 percent) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

Packing The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

Note: The Cupboards shall be manufactured as per drawing No. MSSIDC/RCT/SC -001, Drawing no. MSSIDC/RCT/SC-002 indicated the position of locker in case of Cupboard (Major with Locker).


SPECIFICATION OF STEEL CUPBOARD PREMIUM QUALITY (MAJOR)

(Drawing No. MSSIDC/RCT/SC-001-A) OVERALL SIZE:

Size Height (H) mm

Width (W) / Length(L) mm

Depth (D)/ Breadth(D) mm

Steel Cupboard (Major)

1980

915

485

1. Steel Cupboard (Major)

Steel Cupboard (Major) having 4 shelves making 5 compartments. Metal generally conforming to IS / 3312 – 1984. The overall dimension should not vary by more than + - 5 mm

2. Lock

The lock shall not be less than 6 lever with duplicate keys of non-corrodible material. For locking arrangement, there shall be 3 way bolting device controlled by lock and operated by brass or zinc based alloy handle.

3. Sides

The sides shall be made from Mild Steel not less than 1.00 mm (20G) thick and without any burrs or dents. The width of the side sheet shall correspond to the depth of the top. The sides shall extend between the extreme surface of the top and bottom shelves.

4. Back

The back shall be made from Mild Steel not less than 1.00 mm (20G) thick and without any burrs or dents. The width of the back sheet shall correspond to width of the top. The back shall extend between the extreme surface of the top and bottom shelves.

5. Top & bottom

The length of the top and bottom shall cover the width of the cabinet and the breadth shall cover the depth of the cabinet. These shall be made from Mild Steel Sheet not less than 1.00 mm (20G) thick without any burrs and dents.

6. Shelves The shelves shall be made from mild steel not less than 1 mm (20 G) thick . Shelves shall have lipped flanges 25mm in width / length and 15 mm in depth as per drawing. Each shelf shall be welded or shall be supported on frame shelf bracket. The bracket shall be so designed and constructed that the shelf is securely supported and that adjustment inside the bracket can be effected easily. Four rack strips shall be provided for supporting the shelves, covering the full height of cabinet. Rack strip shall be made of mild steel and shall not be less than 1 mm in thickness.

7. Right Door

This shall be formed out of mild steel sheet not less than 1.25 mm (18 G) thick having metal stiffners suitably welded or revited to stiffen the door. The centre to centre distance between 2 adjacent hinged to the right side of the cabinet and shall have hole for the handle and a key slot for the key of the lock. The clearance around the door between the door flanges and side top and bottom flanges, shall not be more than 1.25mm.


8. Left Door This shall be similarly constructed as the right door and hinged to the left side of the cabinet.

9. Pedestal The two pedestals shall be made from mild steel sheet not less than 1.25 mm (18G) thick and shall be properly stiffened. The pedestal shall not project out of the cabinet and shall be 125 + - 5mm in height.

10. Hinges The hinges shall be either plain butt type made from mild steel not less than 1.6mm thick or double folded type fabricated from mild steel sheet not less than 1.25mm thick. The hinges shall be secured to the mild steel hinge bracket not less than 2.5mm thick on one side and shall be secured to the door on the other side of the fulcrum. The number of hinges per door leaf shall be not less than four.

11. Color A) Stoving Enamel Spray Paint

All dents, burrs and sharp edges shall be removed from the various components. The components shall be individually pickled, scrubbed and rinsed to remove grease, rust, scale or any other foreign element. Immediately after pickling all the mild steel parts shall be given phosphating treatment conforming to Class C of IS: 3618 – 1966 (specification). Putty shall be applied to all surfaces requiring filling and shall conform to IS 110-1968. Coats of enamel paint shall be then applied as follows :

a) Finish coat with enamels conforming to IS 151 – 1950, IS 2932-1974 or IS 2933 – 1975 and

b) In case of stoving enamel, the component shall thereafter be baked at specified temperature in an oven heated uniformly. The finish shall be smooth and uniform with hard tough filling of enamel strongly adhering to the surface. The finish shall be free from all visible defects and shall not chip when tapped lightly with dull pointed instrument.

All components shall be finished in silver gray / T.A. gray / olive green / any color as per the choice of consignee. Shall be applied/painted and baked upto 80 to 120 centigrade‘s.

The overall dimension shall not vary be more than + - 5 mm.

B) Epoxy Polyester Powder coated

All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing , pickling, phosphating , give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness ( +_ 0.5 percent ) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.


12. Packing The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

Note: The Cupboards shall be manufactured as per drawing No. MSSIDC/RCT/SC-001-A


SPECIFICATION OF STEEL CUPBOARD WITH LOCKERS Drawing No MSSIDC/RCT /SCL-003

Steel Lockers generally conforming to IS No.3314/1965 – with latest up to date amendment.

1) OVERALL SIZE :

No. of Lockers

Height (H) mm

Width(W) / Length (L)

mm

Depth (D)/ Breadth (B)

mm

DOOR SIZE

Width (W) mm

Height (H) Mm

6 1980 910 480 270 890

8 1980 910 480 417 430

12 1980 910 480 270 430

18 1980 910 480 270 280

2) SIDES, BACK, TOP AND BOTTOM

The sides, back, top and bottoms of the cupboards shall be made of 22 G (0.8 mm) CRCA. Sheet.

3) DOORS

The door of lockers shall be made of 20 G. (1 mm) thick CRCA Sheet. The doors shall be provided with ventilating louvers and chrome plated handle. Doors shall be provided with stiffener on back side. The door shall be fitted to the body by two fabricated hinges of size 50 mm x 1 mm thick in each door along with two brackets of 1.25 mm thick. The chrome plated or aluminum index holder shall be provided on each door on front side.

4) LOCKING ARRANGEMENT

A staple locking arrangement shall be provided to the door made out of 3 mm thick MS flat. The sturdy automatic locking system controlled by one lock is to be provided.

5) COLOUR

A) Stoving Enamel Spray paint

All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, and scales. All steel parts shall be given Phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray or any other shade as per choice shall be applied / painted and baked up to 80 to 120 centigrade.


B) Epoxy Polyester Powder coated All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing , pickling, phosphating , give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness ( +_ 0.5 percent ) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

6) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. Overall dimensions should not vary +/ - 5 mm.

The cupboard with lockers shall be manufactured as per the drawing No. MSSIDC/RCT/SCL-003.


SPECIFICATIONS OF STEEL FILING CABINETS (DRAWING No. MSSIDC/RCT /SF-004)

1) OVERALL SIZE :

No. of Drawers

Height (H) mm

Width (W)/ Length(L) mm

Depth (D)/ Breadth(B) mm

2 750 470 700

3 1080 470 700

4 1380 470 700

2) Side & Back of cabinet

The sides and back shall be made from steel sheet not less than 0.8mm (22G) and without any burrs or dents. The width of the side sheet correspond to the depth of the cabinet. The width of the back sheet shall correspond to the width of the cabinet. A top cover shall be provided and the sides & back shall extend from bottom edge of the top covered to the floor.

3) Top & Bottom of cabinet

The top & bottom shall be of steel sheet not less than 0.8mm (22G) thick. The width of the top & bottom shall cover the width of the cabinet and the length shall cover depth of the cabinet.

4) FILING DRAWERS

The Drawers of the Filing Cabinet shall be manufactured out of CRCA Sheet 22 G (0.8 mm). The drawer front shall have a back cover secured to it to make it box type. The drawers shall have arrangement on the sides to seat it on the slides and an arrangement by a locking mechanism to stop it when fully pushed in. The drawers shall be fitted with chrome plated or Plastic handle to the front of the drawer and Index Holder.

5) DRAWER DIMENSIONS

The Minimum clear internal dimensions of the Drawers for all the three types shall be suitable for holding a standard suspension holder running on cradle strips having center to center distance of 385 mm, the height of the largest holder being 255 mm including 15 mm high tab. The depth of the drawers shall be not less than 600 mm. The bottom of the lowest drawer shall be minimum 75 mm above the floor level.

6) DRAWER SUSPENSION

The drawer suspension shall be of ball bearing roller type suspension to ensure withdrawal of full depth of the drawer.


7) LOCKING MECHANISM

The locking mechanism shall be made from steel sheet not less than 1.6 mm (16 G) thick. The arrangement shall be such as to lock all the drawers simultaneously from the front of the cabinets. At the time of locking the whole cabinet if one of the drawers has not been pushed in fully and thus remains partly open, that drawer shall remain unlocked. As soon as that drawer is pushed in fully, it shall get locked automatically without further operation by the user.

8) LOCKS

The automatic locking unit should of push button type with lock not less than 6 levers with duplicate keys of non-corrosive metal.

9) FINISH

All dents, burrs and sharp edges shall be removed from the various components and they shall be pickled to remover grease, rust, scale or any other foreign element and phosphated before enameling Enamel paint coating conforming to IS 2932 / 1964. The finish shall be smooth (oven baked) uniformly applied and free from visible defects. It shall be hard and shall not readily chip or flake.

10) COLOUR

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, and scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray or any other shade as per choice shall be applied / painted and baked up to 80 to 120 centigrade.


All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing , pickling, phosphating , give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+_ 0.5 percent) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

11) PACKING The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.


The steel filing cabinet shall be manufactured as per the drawing No. MSSIDC/RCT/ SF-004

12) NOTE

Overall dimensions should not vary by more than + -. 5 mm. Fabrication of filing Cabinet, Top 0and Bottom filing drawer clutch, compartment checks should be as per IS 3313 / 1983 ( Second Revision ) and drawing.


SPECIFICATIONS OFSTEEL BOOK CASE (Drawing No. MSSIDC/RCT/SBC-005)

1) OVERALL SIZE :

The overall size of the Book case should be 1675 mm (H) x 840 mm (W) x 305 mm (D)

2) SIDES, TOP, BACK AND BOTTOM :

The sides, top, back and bottom of the Book Case shall be manufactured out of 20 G (1 mm) thick MS sheet.

3) SHELVES : The book case should have three shelves making four compartments manufactured out of 20 G (1 MM) thick sheet.

4) SLIDING GLASS SHUTTER :

Each compartment of the Book Case should be provided with shutter manufactured out of 20 G (1 mm) MS sheet with 3 mm thick Glass fitted to the shutter fixed with rubber beading having packing screws at the back side of the border of the glass. The shutter should disappear when opened and slide smoothly on the top supports provided for sliding. The shutter should be provided with individual locking arrangement and two chrome plated handles for each shutter. The lock should be provided with keys interchangeable with each other.

5) COLOUR

A) Stoving Enamel Spray Paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or gray or any other shade as per choice of consignee shall be applied / painted and baked up to 80 to 120 centigrade‘s. B) Epoxy Polyester Powder coated

All the metal parts should be coated with epoxy polyester powder of T Gray color or as

per choice of consignee and coated film of minimum 50 micron. All metal parts should

be thoroughly in house pre-treated by individual hot dip tank process, including

degreasing, pickling, phosphating , give phosphate coating confirming to IS 3618-1996

Class C. The treated material should be then coated with epoxy polyester powder

minimum 50 micron thickness (+_ 0.5 percent) and oven baked at 180 to 200

centigrade. All this process must be done in house only. These works cannot be

outsourced.


6) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The book case shall be manufactured as per the Drawing No. MSSIDC/RCT/SBC-005.


SPECIFICATION OF METAL SHELVING RACKS (Drawing No. MSSIDC/RCT/MSR-006)

A) OPEN TYPE

Metal Shelving Racks (Open Type) with adjustable/ fixed shelves and angle post in the following sizes with latest amendment and specifications conforming to IS. 1988 / 83 as below.

1) OVERALL SIZE :

No. of Shelves Including top and

bottom

Height (H) mm

Width(W) / Length(L)

mm

Depth(D)/ Breadth (B)

mm

3 900 900 375

6 1800 900 375

7 2100 900 375

8 2400 900 375

9 3000 900 375

2) VERTICAL SUPPORTS The Rack shall have vertical supports made out of M.S. Angles of Size 50 x 50 x 5 mm thick.

3) SHELVES

The shelves made out of CRCA Sheet 20 G (1 mm thick) should be supported by 25 x 25 x 3 mm thick M.S.angle frame inside each shelf.

4) COLOUR

A) Stoving enamel spray paint

All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, and scales. All steel parts shall be given Phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or Silver gray, T.A. grey or any other shade as per choice shall be applied / painted and baked up to 80 to 120 centigrade.


All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing, pickling, phosphating , give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron


thickness (+_ 0.5 percent) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

5) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. Metal shelving rack shall be manufactured as per the drawing No. MSR-006

Open Type Rack shall be without Bin Strip and Label Holders.

Metal shelving Rack shall be manufactured as per the drawing No. MSSIDC /RCT/MSR-006.


SPECIFICATION OF METAL SHELVING RACKS (Drawing No. MSSIDC/RCT /MSR/007)

(B) CLOSED TYPE

Metal Shelving Racks (Closed Type) with adjustable/ fixed shelves and angle post in the following sizes with latest amendment and specifications conforming to IS. 1988 / 83 as below.

1) OVERALL SIZE:

No. of Shelves Including top and bottom

Height (H) mm

Width(W) / Length(L) mm

Depth(D)/ Breadth (B) mm

3 900 900 375

6 1800 900 375

7 2100 900 375

8 2400 900 375

9 3000 900 375

1) VERTICAL SUPPORTS

The Rack shall have vertical supports made out of M.S. Angles of Size 50 x 50 x 5 mm thick.

3) SHELVES

Shelves made of CRCA Sheet 20 G (1 mm thick) should be supported by 25 x 25 x 3 mm thick M.S.angle frame inside each shelf.

4) BACK & SIDES

The Rack shall be covered from the back with CRCA Sheet 22 G (0.8 mm thick ). The side cladding of the rack shall be made of CRCA sheets 22 G (0.8 mm thick).

5) COLOUR


All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, and scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate redoxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray or T.A. grey or any other shade as per choice of consignee. Shall be applied / painted and baked up to 80 to 120 centigrade‘s.


All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be


thoroughly in house pre-treated by individual hot dip tank process, including degreasing, pickling, phosphating, give phosphate coating confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+_ 0.5 percent) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

6) PACKING:

The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

Metal shelving Rack shall be manufactured as per the drawing No. MSSIDC/RCT/

MSR-007.

NOTE : - Closed Type Rack shall be without Bin Strip and Label Holders.


SPECIFICATION FOR STEEL WRITING TABLE NO.I (Drawing No. MSSIDC/RCT/SWT-008)

1) OVERALL SIZE :

The overall size of the top of the Table shall be 900 mm (L) x 600 mm (W) x 750 mm (H)

2) TOP :

The Table top shall be made of 18mm MDF Board with long side covered with Post Formed 0.8 mm laminate of peach / gray / teak or any other colour with balancing laminate on other side. Two long edges of the top shall be performed in radius with half-round profile and other two plain side shall have edge banded with 2 mm thick PVC lipping.

3) FRAME :

The supporting frame for the top of the table shall be made of MS Angles of size 25 mm x 25 mm x 3 mm thick.

4) LEGS :

The supporting legs for the frame of top shall be manufactured out of MS 25 mm square tube / Pipe with wall thickness of 1.6 mm. The legs shall be provided with foot-rest made of 25 mm square pipe and neoprene shoes.

5) DRAWERS :

The table shall be provided with one drawer unit on the right side corner attached to the top frame. The overall size of the drawer box shall be 560 mm (D) x 300 mm (w) x 150 mm (H). The drawer shall be fitted with handle made from corrosion resistant material or plastic and with six lever brass lock with keys in duplicate. The entire drawer unit should be manufactured of 0.8 mm MS sheet.

6) COLOUR


All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate redoxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or gray or T.A. grey or any other shade as per choice of consignee shall be applied / painted and baked upto 80 to 120 centigrade‘s.




7) PACKING


All the material used generally conforming to IS: 3498 / 1983 and the table should be manufactured as per drawing No. MSSIDC/RCT/SWT-008.


SPECIFICATION FOR STEEL WRITING TABLE NO.II ( Drawing No. MSSIDC/RCT/SWT-009 )

1) OVERALL SIZE :


2) TOP :

The Table top shall be made of 18mm MDF Board with long side covered with Post Formed 0.8mm laminate of peach / gray / teak or any other colour with balancing laminate on other side. Two long edges of the top shall be performed in radius with half-round profile and other two plain side shall have edge banded with 2 mm thick PVC lipping.

3) FRAME :

The supporting frame for the top of the table shall be made of MS Angles of size 25 mm x 25 mm x 3 mm.

4) LEGS :

The supporting legs for the frame of top shall be manufactured out of MS 25 mm square tube / Pipe with wall thickness of 1.6 mm. The legs shall be provided with foot-rest made of 25 mm square pipe and rubber shoes.

5) DRAWERS :

The table shall be provided with three drawers unit on the right hand pedestal. The overall size of the drawer box shall be 560 mm (D) x 380 mm (w) x 450 mm (H). The drawers should be provided with automatic locking arrangement. The drawers shall be fitted with handles made of non-corrosion material or plastic and with six lever brass lock with keys in duplicable. The entire drawer unit should be manufactured of 0.8 mm MS sheet.

6) COLOUR


All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or T.A. gray or any other shade as per choice of consignee shall be applied / painted and baked up to 80 to 120 centigrade.




7) PACKING




SPECIFICATION FOR STEEL WRITING TABLE NO. III

( Drawing No. MSSIDC/RCT/SWT-010)

1) OVERALL SIZE :


2) TOP :

The Table top shall be made of 18mm MDF Board with long side covered with Post Formed 0.8mm laminate of peach / gray / teak or any other colour with balancing laminate on other side. Two long edges of the top shall be performed in radius with half-round profile and other two plain side shall have edge banded with 2 mm thick PVC lipping.

3) FRAME :

The supporting frame for the top of the table shall be made of MS Angles of size 25 mm x 25 mm x 3 mm.

4) LEGS :


5) DRAWERS :

The table shall be provided with three drawers unit on the right hand pedestal. The overall size of the drawer box should be 560 mm (D) x 380 mm (w) x 450 mm (H). The drawers shall be provided with automatic locking arrangement. The drawers shall be fitted with handles made of non-corrosion material or plastic and with six lever brass lock with keys in duplicable. The entire drawer unit should be manufactured of 0.8 mm MS sheet.

6) SIDE LOCKER :

The table should be provided with side locker having overall size of 560 mm (D) x 380 mm (w) x 450 mm (H). The locker should have door with handle and six lever brass lock with non – interchangeable stainless steel key in duplicable. The side locker should be provided with one shelf making two compartments. The entire locker unit should be manufactured of 0.8 mm MS sheet.


7) COLOUR

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or T.A. grey or any other shade as per choice of consignee shall be applied / painted and baked up to 80 to 120 centigrade‘s.



8) PACKING




SPECIFICATION FOR STEEL EXECUTIVE TABLE ( Drawing No. MSSIDC/RCT/SET-011 )

1) OVERALL SIZE :


2) TOP :

The Table top shall be made of 25 mm MDF Board with long side covered with Post Formed 0.8mm laminate of peach / gray / teak or any other colour with balancing laminate on other side. Two long edges of the top shall be performed in radius with half-round profile and other two plain side shall have edge banded with 2 mm thick PVC lipping.

3) FRAME :

The supporting frame for the top of the table shall be made of 25 mm square tube of 1.6 mm wall thickness as shown in the drawing No. SET / 014.

4) LEGS :


5) DRAWERS :

The table shall be provided with three drawers unit and one pull out tray of 50 mm (H) on the right hand pedestal. The overall size of the drawer box should be 560 mm (D) x 380 mm (w) x 500 mm (H). The drawers and pull out tray should be provided with automatic locking arrangement. The drawers should be fitted with handles made of non-corrosion material or plastic and with keys in duplicable. The entire drawer unit, pull out tray and drawers should be manufactured of 0.8 mm MS sheet.

6) SIDE LOCKER :

The table shall be provided with side locker and one pull out tray of 50 mm (H) on the left hand side having overall size of 560 mm (D) x 380 mm (W) x 500 mm (H). The locker shall have door with handle and six lever brass lock with non – interchangeable stainless steel keys in duplicable. The side locker should be provided with one shelf making two compartments. The side lockers and pull out tray shall be manufactured out of 0.8 mm MS sheet.


7) FRONT CLOSURE :

The front side of the table between drawer unit and side locker shall be closed with front closure made out of MS sheet 0.8 mm thick.

8) COLOUR :

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or T.A. gray or any other shade as per choice of consignee shall be applied / painted and baked up to 80 to 120 centigrade.

B)Epoxy Polyester Powder coated


9) PACKING :


All the material used generally conforming to IS: 3498 / 1983 and the table should be manufactured as per drawing No. MSSIDC/RCT/SET-011.


SPECIFICATION FOR STEEL TUBULAR CHAIRS ( ‘K’ type)

A) STEEL TUBULAR CHAIR ‘K’TYPE HAVING CANE SEAT, BACK WITH CONTINUOUS ARMS

(Drawing No. MSSIDC/RCT/KTC-012 /012-A/ 012-B )

1) OVERALL SIZE :

The overall size of the Chair shall be 890 mm (H) x 500 mm (W) x 500 mm (D) as shown in the Drawing.

2) FRAME :

The main tubular frame of the Chair shall be made out of 25 mm MS round tube of ERW quality. The thickness of the Tube shall be 1.6 mm. The legs of the frame shall be provided with neoprene rubber shoes.

3) SEAT :

The size of the seat shall be 450 mm (W) x 400 mm (D). The seat shall be made out of best quality teak wood with plastic cane of durable quality . The teakwood part should be polished in melamine polish. The seat shall be fitted to the frame having M .S. flat of size 20 x 3mm thick widthwise support at back side and 2 M.S.clit of size 20x3mm thick 75mm long, at front side fitted with screws, under seat frame.

4) BACK :

The size of the back shall be 450 mm (W) x 380 mm (H). The back shall be made out of best quality teak wood with plastic cane of durable quality. The teakwood part shall be polished in melamine polish. The back should be fitted to the frame on 4 nos. of M.S. Clits of size 20x3mm thick 75mm long, welded to the frame and fitted with the screws to the frame .

5) HAND REST :

The Hand Rest shall be made out of best quality teakwood and shall be polished in melamine polish.

6) COLOUR

A) Stoving enamel spray paint The steel frame of the chair should be painted with Stove Enameled Olive Green or Steel Gray shade with oven baked paint finish. All steel used should be chemically treated and coated with red oxide before painting.


B)Epoxy Polyester Powder coated


7) PACKING :

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

All the material used generally conforming to IS: 3499 / 1985 and Chair shall be manufactured as per drawing No. MSSIDC/RCT/KTC-012 / 012-A / 012-B.


(A) STEEL TUBULAR CHAIR ‘K’ TYPE HAVING M.S. SHEET SEAT, BACK WITH ARMS

(Drawing No .MSSIDC/RCT/KTC-012 / 012-A / 012-B)

1) OVERALL SIZE :

The overall size of the Chair shall be 890 mm (H) x 500 mm (W) x 500 mm (D) as shown in the Drawing No.STC / WOA /008.

2) FRAME :

The main tubular frame of the Chair shall be made out of 25 mm MS tube of ERW quality. The thickness of the Tube shall be 1.6 mm. The legs of the frame shall be provided with plastic shoes.

3) SEAT :

The size of the seat should be 450 mm (W) x 430 mm (D). The seat should be made out of 1 mm thick M.S. Sheet with stiffener. The seat should be welded to the Steel Frame.

4) BACK :

The size of the back should be 450 mm (W) x 380 mm (H). The back should be made out of 1 mm thick M.S. Sheet with stiffener. The seat should be welded to the Steel Frame

5) HAND REST :

The Hand Rest shall be made out of best quality plastic in black colour . 6) COLOUR


The steel frame of the chair should be painted with Stove Enameled Olive Green or any Grey shade with oven baked paint finish. All steel used should be chemically treated and coated with red oxide before painting.




7) PACKING


All the material used generally conforming to IS: 3499 / 1985 and Chair shall be manufactured as per drawing No. MSSIDC/RCT /KTC-012 /012-A/012-B.


(B) STEEL TUBULAR CHAIR ‘K’ TYPE HAVING CUSHION SEAT, BACK WITH ARMS

(Drawing No. MSSIDC/RCT /KTC-012/012-A/012-B)

1) OVERALL SIZE : The overall size of the Chair shall be 890 mm (H) x 500 mm (W) x 500 mm (D) as shown in the Drawing No.STC / WOA /008 A.

2) FRAME :

The main tubular frame of the Chair shall be made out of 25 mm MS tube of ERW quality. The thickness of the Tube shall be 1.6 mm. The legs of the frame shall be provided with plastic shoes.

3) SEAT :

The size of the seat should be 450 mm (W) x 400 mm (D). The seat should be made out of 12mm thick good quality plywood fitted with width 32 density foam of 50mm thickness. The foam shall be covered with baked foam leather cloth or acrylic cotton fabric tapestry as per drawing. The frame shall have M.S.flat widthwise one support at backside and two M.S.clit .

4) BACK :

The size of the back should be 450 mm (W) x 380 mm (H). The seat should be made out of 12mm thick good quality plywood fitted with width 32 density foam of 50mm thickness. The foam shall be covered with baked foam leather cloth or acrylic cotton fabric tapestry as per drawing. The back should be fitted to the frame on 4 nos. of MS welded support made out of flat 20 x 3 mm with screw.

5) HAND REST :

The Hand Rest shall be made out of best quality plastic in black colour .

6) COLOUR :


The steel frame of the chair should be painted with Stove Enameled Olive Green or any Grey shade with oven baked paint finish. All steel used should be chemically treated and coated with red oxide before painting.




7) PACKING :

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. All the material used generally conforming to IS: 3499 / 1985 and Chair shall be manufactured as per drawing No. MSSIDC/RCT /KTC-012/012-/012-B.


(C) STEEL TUBULAR CHAIR ‘K’ TYPE HAVING CANE SEAT, BACK WITHOUT ARMS

(Drawing No MSSIDC/RCT/ KTC-012-A)

1) OVERALL SIZE :

The overall size of the Chair shall be 890 mm (H) x 500 mm (W) x 500 mm (D) as shown in the Drawing No.STC / WOA /009.

2) FRAME :

The main tubular frame of the Chair shall be made out of 25 mm dia MS tube of ERW quality. The thickness of the Tube shall be 1.6 mm. The legs of the frame shall be provided with plastic shoes.

3) SEAT :

The size of the seat should be 450 mm (W) x 400 mm (D). The seat should be made out of Teak wood frame of size 50x22mm with plastic cane. The teakwood part should be polished in melamine polish. The frame shall have ms flat 20x3mm widthwise one support at back side and two ms clit 20x3mm.

4) BACK :

The size of the back should be 450 mm (W) x 380 mm (H). The back should be made out of best quality teak wood with plastic cane of durable quality as per drawing. The teakwood part should be polished in melamine polish. The back should be fitted to the frame on 4 nos. of MS welded support made out of flat 20 x 3 mm with screw.

5) COLOUR :

A) Stoving enamel spray paint The steel frame of the chair should be painted with Stove Enameled Olive Green or any Grey shade with oven baked paint finish. All steel used should be chemically treated and coated with red oxide before painting. B)Epoxy Polyester Powder coated



6) PACKING :


All the material used generally conforming to IS: 3499 / 1985 and Chair shall be manufactured as per drawing No.MSSIDC/RCT/KTC-012 .


SPECIFICATION FOR STEEL STOOL ( Drawing No. MSSIDC/RCT/SS-013 )

OVERALL SIZE :

305 mm (L) x 305 mm (W) x 533 mm (H)

1) TOP :

The top shall be made of the sheet of 20 G. (1.00 mm ) thick CRCA Sheet or pre-laminated Board of 18 mm thickness with PVC beading pasted from all the sides. The MS Top should be welded to the frame and pre-laminated board top should be fitted to the frame with screws. .

2) FRAME :

The top supporting frame shall be made out of MS angle 25 x 25 x 3 mm. 3) LEGS :

The legs supporting the frame shall be made out of 25 x 25 mm MS square pipes with 1.6 mm thickness. The legs shall be provided with neoprene rubber shoes.

4) COLOUR

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease, rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray T.A. grey or any other shade as per choice consignee shall be applied / painted and baked up to 80 to 120 centigrade.




5) PACKING


The stool shall be manufactured as per the Drawing No.MSSIDC/RCT/ SS-013.


SPECIFICATIONS FOR STEEL BENCH ( Drawing No. MSSIDC/RCT/SB-014 )

1) OVERALL SIZE :

1830 mm (L) x 305 mm (W) x 450 mm (H)

2) TOP :

The top shall be made of the sheet of 20 G. (1.00 mm ) thick M.S. Sheet or pre- laminated Board of 18 mm thickness with PVC bidding pasted on all the sides. The MS Top should be welded to the frame and pre-laminated board top should be fitted to the frame with screws. The MS top should be provided with stiffener of size 50 mm (W) x 20 mm (H) along the length of the top.

3) TOP FRAME :

The top supporting frame should be made out of 25 x 25 x3 mm thick MS angle.

4) LEGS :

The six legs supporting the frame should be made out of 25 x 25 x1.6 mm square pipe . The legs shall be provided with rubber shoes.

5) COLOUR


All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate red oxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray T.A. grey or any other shade as per choice of consignee shall be applied / painted and baked up to 80 to 120 centigrade.




6) PACKING The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The bench shall be manufactured as per the Drawing No. MSSIDC/RCT/ SB-014.


SPECIFICATION FOR DUAL DESK WITH PRE-LAMINATED TOP

(Drawing No . MSSIDC/RCT/DD-015/A/B/C/D)

Two Seater ; 990 mm (L) x 914 mm (W) x 750 (H)

Three Seater : : 1220 mm (L) x 914 mm (W) x 750 (H)

1) DESK TOP :

The Desk top shall be made of pre-laminated board of 18mm thickness with PVC beading. The top shall have a slope of 50mm towards the seat as shown in the drawing. The top shall be fitted to the frame by screws.

2) DESK FRAME :

The Desk frame shall be made out of M.S. Angle 25 x 25 x 3 mm thick 3) SHELF :

The shelf shall be made out of pre-laminated Board of 18 mm thick with PVC beading . The pre-laminated Board shall be fitted with screws to Angle frame made out of Angle 25 x 25 x 3 mm . The shelf shall be covered from front and sides by MS sheet of 22 G (0.8 mm) thick.

4) SEAT :

The top of the seat shall be made of pre-laminated board of 18mm thick with PVC beading. The seat top shall be fitted with screws to the frame made of M.S.angle 25 x 25 x 3mm thick and one 32mm square pipe of 1.6mm thick as per drawing

5) BACK :

The back shall be made of pre-laminated board of 18mm thick with PVC beading. The back shall be fitted with screws to the frame. The back shall be provided with one supporting Angle of 25 x 25 x 3 mm thick The back shall be provided with inclination of about 25 mm from the seat as shown in the Drawing.


6) VERTICAL SUPPORT :

The vertical support for Desk Top, shelf, Seat, Back shall be made out of MS 32 mm square pipes of 1.6 mm thickness.

7) BOTTOM FRAME :

The bottom frame shall be made out of MS 32 mm Square pipe of 1.6 mm thick.

8) COLOUR : A) Stoving enamel spray paint

All the steel parts shall be free from dents, burrs and sharp edge. They shall be pickled before stove enamellings to remove grease, rust, scale or any other foreign element to be followed by phosphating.

The Dual Desk should be painted with stove enamel olive green or silver gray or T.A. grey shed with oven baked paint finish. Prior to painting two coats of red oxide shall be applied. B) Epoxy Polyester Powder coated


9) PACKING


The Duel Desk shall be manufactured as per Drawing No. MSSIDC/RCT/DD/15/A/B/C/D.


SPECIFICATION FOR DUAL DESK WITH M.S. SHEET TOP ( Drawing No. MSSIDC/RCT/DD / 15/A/B/C/D )

1) OVERALL SIZE :



2) DESK TOP :

The Desk top shall be made out of M.S. Sheet 22 G (0.8 mm) thick. The top shall have a slope of 50 mm towards the seat as shown in the drawing.

3) SHELF :

The shelf shall be manufactured from 22 G (0.8 mm) thick M.S. Sheet. The sheet shall be welded to Angle frame made out of angle 25 x 25 x 3 mm. The shelf shall be covered from front and sides by MS sheet of 22 G (0.8 mm) thick.

4) SEAT :

The top of the seat shall be manufactured out of 22 G (0.8 mm) thick M.S. Sheet. The top shall be welded to frame made out of 3 Nos. MS Angle 25 x 25 x 3 mm and 1 No. of 32 mm square pipe of 1.6 mm thick as shown in the drawing.

5) BACK :

The back shall be manufactured out of 22 G (0.8 mm) thick M.S. Sheet. The back shall be welded to frame. The back shall be provided with one supporting Angle of 25 x 25 x 3 mm. The back shall be provided with inclination of about 25 mm from the seat as shown in the Drawing.


The vertical support for Desk Top, shelf, Seat, Back shall be made out of MS 32 mm sequare pipes of 1.6 mm thickness.

7) BOTTOM FRAME :

The bottom frame shall be made out of MS 32 mm Square pipe of 1.6 mm thickness.

8) COLOUR :


All the steel parts shall be free from dents, burrs and sharp edge. They shall be pickled before stove enamellings to remove grease, rust, scale or any other foreign element to be followed by phosphating.The Duel Desk should be painted with stove enamel olive green or silver gray or T.A. grey shed with oven baked paint finish. Prior to painting two coats of red oxide shall be applied.




9) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The Duel Desk shall be manufactured as per Drawing No. MSSIDC/RCT/DD/15/A/B/C/D


SPECIFICATION FOR DUAL DESK WITH COMMERCIAL PLY WOOD WITH SUNMICA TOP

( Drawing No. MSSIDC/RCT/DD / 15/A/B/C/D)

1) OVERALL SIZE :



2) DESK TOP :

The table top shall be made of commercial plywood of 18 mm thickness with sunmica top overall thickness 19 mm and teak wood beading on all sides. The top shall have a slope of 50 mm towards the seat as shown in the drawing. The top shall be fitted to the frame with the help of screws.

3) SHELF :

The shelf shall be made of commercial plywood of 18 mm thick with sunmica top, overall thickness 19 mm. The commercial ply shall be fitted with screws to angle frame made out of angle 25 x 25 x 3 mm. The shelf shall be covered from front and sides by M.S. Sheet of 22 G thick.

4) SEAT :

The top of the seat shall be out of commercial ply wood of 18 mm thick with wooden beading. The seat top shall be fitted with screws to the frame made out of three M.S. Angle 25 x 25 x 3 mm and one 32 mm square pipe of 1.6 mm thick as shown in the Drawing.

5) BACK :

The back shall be made of commercial ply wood of 18 mm thickness with wooden beading, overall thickness 19 mm. The back shall be fitted with screws to the frame. The back shall be provided with one supporting angle of 25 x 25 x 3 mm. The back shall be provided with inclination of about 25 mm from the seat as shown in the Drawing.




7) BOTTOM FRAME :


8) COLOUR :

A) Stoving enamel spray paint All the steel parts shall be free from dents, burrs and sharp edge. They shall be pickled before stove enamellings to remove grease, rust, scale or any other foreign element to be followed by phosphating.

The Dual Desk should be painted with stove enamel olive green or silver gray or T.A. grey shed with oven baked paint finish. Prior to painting two coats of red oxide shall be applied.



9) PACKING


The Dual Desk shall be manufactured as per Drawing No. MSSIDC/RCT/DD/020 A/B/C./D


SPECIFICATION FOR DUAL DESK WITH TEAK WOOD TOP ( Drawing No. MSSIDC/RCT/DD / 15/A/B/C/D )

1) OVERALL SIZE :



2) DESK TOP :

The Desk top shall be made of teakwood plank of 25 mm . The width of the plank used should not be less than 150 mm. The plank shall be fitted to the frame with screws. The top shall have a slope of 50 mm towards the seat as shown in the drawing.

3) DESK FRAME :

The Desk frame shall be made out of M.S. Angle 25 x 25 x 3 mm.

4) SHELF :

The shelf shall be made of teakwood plank of 25 mm thick. The plank shall be fitted with screws to angle frame made out of angle 25 x 25 x 3 mm. The shelf shall be covered from front and sides by M.S. Sheet of 22 G (0.8 mm) thick.

5) SEAT :

The top of the seat shall be made out of teakwood plank of 25 mm thickness. The top shall be fitted with screws to the frame made out of 3 No. of M.S. angle 25 x 25 x 3 mm and one 32 mm square pipe of 1.6 mm thickness as shown in the Drawing.

6) BACK :

The back shall be made of teakwood plank of 25 mm thick. The back shall be fitted with screws to the frame. The back shall be provided with one supporting Angle of 25 x 25 x 3 mm. The back shall be provided with inclination of about 25 mm from the seat as shown in the Drawing.




8) BOTTOM FRAME :


9) COLOUR : A) Stoving enamel spray paint

All the steel parts shall be free from dents, burrs and sharp edge. They shall be pickled before stove enamellings to remove grease, rust, scale or any other foreign element to be followed by phosphating. The teak wood planks shall be without termites and knots. The wooden plank should be polished with wood polish.

The Duel Desk should be painted with stove enamel olive green or silver gray or T.A. grey shed with oven baked paint finish. Prior to painting two coats of red oxide shall be applied.



10) PACKING


The Dual Desk shall be manufactured as per Drawing No. MSSIDC/RCT/DD/15./A/B/C/D


SPECIFICATION OF STEEL HOSTEL COT WITH WATERPROOF COMMERCIAL

PLYWOOD TOP

( Drawing No. MSSIDC/RCT/SHC/-033 )

1) OVERALL SIZE :

Steel hostel cot should be of overall size 1910 mm (L) x 910 mm (W) x 450 mm (H) . Height is measured from the floor to the bed.

2) FRAME :

The outer frame made from CRCA rectangular pipe of 50mm x 25mm x 1.6 mm thick with 5 nos. of stiffners made out of CRCA square pipe 25mm x 25mm x 1.6mm thick welded to outer main frame. Each stiffner shall be provided with 4 nos.of drilled holes of 5mm dia for fitting of plywood.

3) HEADBOW :

The outer frame of headbow is made from 30mm x 30mm x 1.6mm thick CRCA square pipe, provided with 2 horizontal widthwise and 2 vertical support , made out of CRCA square pipe 30mm x 30mm x 1.6 mm thick. The brackets shall be welded to headbow for joining to main frame with the help of 8mm x 50mm nut & bolt. The bracket shall be made from MS flat of 100mm x 50mm x 6mm thick with 10mm dia no.of holes.

4) LEGBOW :

The outer frame of leg bow is made from CRCA square pipe of 30mm x 30mm x 1.6mm thick , provided with one number of horizontal support widthwise. The bracket shall be welded to leg bow for joining to main frame with the help of 8mm x 50mm nut & bolt. The bracket shall be made out of 100mm x 50mm x 6mm thick with 10mm dia. 2 No.of holes .

5) TOP OF COT :

Waterproof commercial top of 18mm thick fitted to main frame with the help of 5mm Philips head self tapping plated screw.

6) MOSQUITO NET ARRANGEMENT The provision for mosquito net frame shall be provided to headbow and legbow.


7) SHOES Neoprene rubber shoes of suitable dia. shall be provided to headbow and legbow.

8) COLOR

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate redoxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray or T.A. grey or any other shade as per choice of consignee shall be applied / painted and baked upto 80 to 120 centigrade‘s.



9) PACKING


The Cot shall be manufactured as per drawing No. MSSIDC/RCT/SHC-33.


SPECIFICATIONS OF STEEL SAFE (Drawing No. MSSIDC/RCT/SSF-018)

1) Steel Safe Fire Resisting Burglar Resisting

The specifications of safe shall generally conforming to IS: 550 Part – II 1991 with uptodate amendment.

The Dimension sizes and general required shall be confirming to IS 550 Part / ( Page II/15 and II/16)

1. MATERIAL

The different parts of safes shall be manufactured from material as specified in table 1 enclosed.

2. DIMENSIONS, SIZES & GENERAL REQUIREMENTS

These shall be as specified in Table 2 enclosed

3. CLASS

Type ( Wherever applicable)

4. CONSTRUCTION

The constructions and workmanship (Door Frame, Door, Door Fittings, 1 Locker) shall be as per IS: 550 (Part-I) 1991 ( Vide Clause No.7 – 7.1 to 7.6.11)

5. MARKING

A metal plate showing classification of safe together with manufacturer name and the year of manufacturer shall be fixed on the inner face of the door shutter of the safe.

6. MARKING ON KEYS

The keys shall bear an identification number which shall not be same on the Serial No. of the safe.

7. COLOUR

A) Stove enamel spray paint The safe shall, after usual anti-rust treatment and cleaning, be painted inside and outside with anticorrosive primer (IS: 2074: 1979) followed by two under coats of paints and finally painted with enamel paint. Olive green or silver grey or T.A. grey or any other shade as per choice of consignee. B) Epoxy Polyester Powder coated All the metal parts should be coated with epoxy polyester powder of T Gray color or as per choice of consignee and coated film of minimum 50 micron. All metal parts should be thoroughly in house pre-treated by individual hot dip tank process, including degreasing , pickling, phosphating , give phosphate coating


confirming to IS 3618-1996 Class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness ( +_ 0.5 percent ) and oven baked at 180 to 200 centigrade. All this process must be done in house only. These works cannot be outsourced.

Packing The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

2) Steel Safe Non Fire Proof Burglar Resisting

The specification of the safe shall be confirming to IS 14204–1994 with latest amendment. The diamension sizes and specification shall be confirming to IS 14204–1994 with latest amendment (Page II/7). The detailed IS Specifications are given in the foregoing pages.

The Steel safe should be manufactured as per Drawing No. MSSIDC/RCT/SSF-018.


SECIFICATION OF DOUBLE DECKER / BUNKER BED ( Drawing No. MSSIDC/RCT/ BB – 030 )

1) OVERALL SIZE :

The overall size of the bed should be 1950 mm(L) x 785 mm (w) x 1675 mm (H) .

2) VERTICAL SUPPORTS :

The two vertical supports of the Bunker Bed shall be made out of 38 mm dia tubular pipe of 1.6 mm wall thickness. The railings for the vertical support shall also be made out of 2 tubular pipes of 38 mm dia welded horizontally and in between three vertical square pipes of 25 mm and 1.6 mm wall thickness shall be welded, as shown in the drawing.

3) FRAME :

The two frames should be made out of MS Rectangular Pipes of size of 50 mm x 20 mm with 1.6 mm wall thickness. he frame shall be fitted to the vertical supports with the help of nuts and bolts and bracket of size 100 x 50 mm, as shown in the drawing, of 3 mm thickness on all the four corners of each frame shall be provided.

4) RAILING FOR TOP BED :

The railing for top bed shall be manufactured out of 25 mm square pipes of 1.6 mm wall thickness as shown in the drawing.

5) TOP OF BED :

The top of the bed should be made out of good quality plywood of 12 mm thickness for both the upper and lower bed and the frame on which the top is fitted shall be supported by 2 square pipes of 25 mm horizontally welded, called as stiffeners. At the two ends of the frame Flat of size 25 mm x 2 mm shall be welded so that the top of plywood sheet will rest on it.

6) LADDER :

The ladder shall be made out of square of 25 mm with 1.6 mm wall thickness. The width of the ladder shall be 425 mm and length shall be 1460 mm. The ladder shall be attached with the frame with the help of nuts and bolts and can be easily removable. The ladder shall be detachable.

7) COLOUR :

A) Stoving enamel spray paint All dents, burrs and sharp edges shall be removed from the various components and they shall be scrubbed and rinsed to remove grease , rust, scales. All steel parts shall be given phosphating treatment followed by coat of suitable primer such as zinc chromate redoxide. Putty shall be applied to all surface requiring filling. Then two coats of stove enameled olive green or silver gray or any other


shade as per choice shall be applied / painted and baked upto 80 to 120 centigrades.



PACKING :

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The Bunder Bed/Double Deckor should be manufactured as per drawing No. MSSIDC/RCT/ BB-030.


SPECIFICATIONS OFSTEEL OFFICECOMPACTOR( MOBILE STORATE UNIT) ( Drawing No. MSSIDC/RCT/COMP/2014-15-001 )

1) OVERALL AREA SIZE :

The overall size of the Compactor should be 2100 mm (H) x 915 mm (W) x 2452mm.(L) The Compactor should be consists of three upper units: a) Single faced fixed unit size- 2100mm (H) x 915 mm (W) x 400mm (D) b) Double faced mobile unit size- 2100mm (H) x 915mm (W) x 762mm (D) c) Single faced mobile unit size- 2100mm (H) x 915mm (W) x 400mm (D)

2) SIDES, TOP, BACK AND BOTTOM :

The sides, top, back and bottom of the compactor shall be manufactured out of 20 G ( 1 mm ) thick MS sheet.

3) SUPER STRUCTURE :

The structure of the mobile storage system will consist of complete knock down type panels in 20 gauge CRCA

4) SHEVELS :

Shelves made of CRCA prime quality Steel having 8 folds will be provided, each designed to carry U.D.L of 70 kgs

5) VERTICALS PANELS :

Vertical Panels consist of the front, Centre & rear panels shall be made out of CRCA prime quality Steel & Designed to take the load of shelves

6) DRIVE COVER PANELS : Made out of CRCA prime quality steel to cover the entire drive mechanism.

7) TROLLEY DRIVE MECHANISM :

The wheels will be supported on special Grade Antifriction bearings to have smooth & Effortless movement. The entire mechanism of Gear & sprockets shall be fitted on the front panel of trolley.


8) GUIDE RAILS: The guide rails shall be made out of 30 mm round bright bar placed on M.S. plate

with end stoppers which will be above the floor as per international Standards of Safety.

9) DRIVING WHEEL :

Driving wheels should be provided a PU Coated round or 3 prong drive wheel for better leverage, torque and free movement of the trolley over the rails

10) COLOUR

Epoxy Polyester Powder coated


11) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The Steel Office Compactor shall be manufactured as per the Drawing No. MSSIDC/RCT/COMP /2014-15/001


Appendix No.01

DRAWINGS AND SPECIFICATIONS

FOR

HOSPITAL FURNITURE


SPECIFICATIONS FOR BEDSIDE LOCKER

( Drawing No. . MSSIDC/RCT/BSL – 2012- 021)

1) OVERALL SIZE :

The overall size of the Bedside Locker should be 405 mm (L) x 405 mm (W) x 750 (H).

2) TOP : The Top should be made of Stainless Steel Sheet of 304 grade. The four sides of the top should be double bended. The Top should be fitted to the frame made out of 25x25 mm MS Square Pipes of 1.6 mm wall thickness.

3) LEGS : The supporting legs for the frame of top should be manufactured out of 25 mm MS Square Pipe with wall thickness of 1.6 mm and fitted with rubber / nylon shoes.

4) LOCKER The Locker should be manufactured out of 22 G. ( 0.8 mm ) M.S. Sheet. The size of the Locker should be 305 mm (W) x 355 mm (D). The locker should be provided with ventilating louvers, a Handle and Locking arrangement made out of M.S. flat.

5) COLOUR :

Except for the stainless steel parts, all the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling, phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.

6) PACKING


The Bedside Locker should be manufactured as per drawing No. . MSSIDC/RCT/BSL-2012- 021.


SPECIFICATION FOR BEDSIDE SCREEN ( Drawing No. . MSSIDC/RCT/BSS-2012-022 )

1) OVERALL SIZE :

The overall size of the Bedside Screen should be

After Opening - 2380mm (L) x 1730 mm (H)

After Closing - 1200 mm (L) x 1730 mm (H) 2) FRAME :

The frame of the Bedside Screen should be manufactured out of CRCA 20 mm dia 18G thick Pipe. Three frames should be manufactured as shown in the drawing. Two frames of size 590 mm (W) x 1480mm (H) and one frame of size 1200 mm (W) x 1480 (H). Each side frames should be mounted on one wheel of 50 mm dia as shown in the drawing. The center frame should be mounted on 4 wheels of 50 mm dia as shown in the drawing. The bedside screen frame should be provided with 12 hooks for curtain spring as shown in the drawing.

3) HINGES:

Two folding frames of the Bedside Screen should be attached to the center frame with the help of two hinges made out of pipes.

4) COLOUR : Except for the stainless steel parts, all the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling, phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.

5) PACKING


The Bedside Screen should be manufactured as per drawing No. MSSIDC/ RCT / BSS-2012-022 )


SPECIFICATION FOR SALINE STAND

( Drawing No. . MSSIDC/RCT/SS-2012-023) 1) OVERALL SIZE :

The overall height of the Saline stand should be adjustable min. 1370 mm to max. 2435 mm.

2) STRUCTURE :

The Saline Stand should be manufactured out of CRCA 32 mm dia 1.6mm thick pipe mounted on a base made out of CRCA rectangular Pipes of 60mm x 30mm x 1.5mm as shown in the drawing. The center pipe should be provided with inside rod made out of 10 mm .bar of S.S. 304 grade for height adjustment. The height of the saline stand should be adjustable from min. 1370 mm to Max. 2435 mm. The fixed height of the center pipe should be 1210 mm. The center pipe should be provided with a Knob made out of 50mm dia with 8mm dia S.S. stud fitted to the top for adjustment of height, as shown in the drawing. The hook made out of 10 mm S.S.304 grade bar should be provided at the top as shown in the drawing.

3) COLOUR :

Except for the stainless steel parts ,all the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling , phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.

4) PACKING :


The Saline Stand should be manufactured as per drawing No.MSSIDC/ RCT/ SS-2012-023


SPECIFICATION FOR FOOT STEP

( Drawing No. . MSSIDC/RCT/ FS-2012 – 024)

1) OVERALL SIZE :

The overall size of the Foot Step should be

Single - 460 mm (L) x 230 mm (W) x 230 mm (H)

Double - 460 mm (L) x 460 mm (W) x 460 mm (H) 2) TOP :

The top should be made of Aluminum Chequered Plate. The top should be fitted to the frame made out of 25 mm MS Square Pipes of 1.6 mm wall thickness.

3) LEGS :

The supporting legs for the frame of top should be manufactured out of 25 mm MS Square Pipe with wall thickness of 1.6 mm and fitted with rubber / nylon shoes.

4) COLOUR :

Except for the Aluminium part/stainless steel parts, all the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling, phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.

5) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit. The

Foot Step should be manufactured as per drawing No.MSSIDC/RCT/FS-02


SPECIFICATION OF STEEL INSTRUMENT CABINET ( Drawing No. . MSSIDC/RCT/IC - 2012– 025)

1) OVERALL SIZE :

The overall size of the Instrument Cabinet should be 1525 mm (H) x 610 mm (W) x 355 mm (D)

2) FRAME :

The Frame of the Instrument Cabinet should be manufactured out of 50x25 x 1.6 mm rectangular MS pipe.

3) TOP, BACK AND BOTTOM :

The Top, Back and Bottom of the Instrument Cabinet should be manufactured out of 20 G.(1 mm) thick MS Sheet.

4) SIDES :

The sides ( L & R ) should be manufactured out of 16 G. (1.6 mm) thick M.S. Sheet press angle, with 5 mm thick glass fitted with outside aluminum biding with screw on both side of the frame.

5) SHELVES :

The Instrument Cabinet should have five shelves made out of 8 mm thick glass making six compartments. Each glass shelf should be fitted on four MS brackets in four corners made out of MS sheet of size 30 mm x 30 mm x 3 mm thick. Between the glass shelf and the bracket rubber lining should be provided.

6) DOOR :

The Instrument Cabinet should be provided with a single door. The Door frame made out of rectangular pipe made of 50x25x1.5mm thick CRCA sheet. The door glass of 5mm thick shall be fitted to the door frame by using aluminum biding.The door should be provided with locking arrangement and the brass lock with duplicate key. Chrome crome plated handle shall be provided to the door. chrome plated handle.


7) COLOUR :

A ll the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling, phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.

8) PACKING


Instrument Cabinet should be manufactured as per the Drawing No.MSSIDC/RCT/IC- 2012-025.


SPECIFICATION FOR REVOLVING STOOL ( Drawing No. . MSSIDC/RCT/RS-2012-026)

1) OVERALL SIZE :

Top : 305 mm, Height : 550 mm to 800 – adjustable.

2) TOP :

The size of the top should be 305 mm dia 1mm thick S.S. 304 grade sheet. The top should be fitted on a CRCA rectangular pipe frame of 50 mm x 25 mm pipe of 1.6 mm thickness.

3) LEGS & CENTRAL TUBE :

The vertical legs should be manufactured out of CRCA 32 mm dia 1.6mm thick pipe and provided with rubber / nylon shoes. The central tube should be manufactured out of 42mm x 2 mm thick dia CRCA pipe. The top should be attached to the central tube with the help of square threaded rod for height adjustment as shown in the drawing. Central tube shall be fitted to 4 horizontal legs made out of CRCA rectangular pipe of 60mm x 30mm x 1.5mm thick.

4) COLOUR :


5) PACKING


The Revolving Stool should be manufactured as per drawing No. MSSIDC/RCT/RS-2012-026.


SPECIFICATION FOR STRETCHER WITH TROLLEY

( Drawing No. MSSIDC/RCT/ST-2012-027

1) OVERALL SIZE :

Length: 2100 mm, Width : 550 mm, Height : 800 mm. 2) TROLLEY :

The trolley for the stretcher should be manufactured out of vertical supports, four numbers, made out of 32 mm dia 1.5mm thick CRCA pipe and horizontal 4 supports should be given to vertical legs as shown in the drawings.

3) TOP :

Top made out of SS 304 grade sheet 1 mm thick supported by frame made out of SS 304 grade 25mm dia 1.5 mm thick pipe.

4) STRETCHER :

The top should be provided with 4 widthwise stiffners made out of SS 304 grade 25mm x 5mm thick flat .

5) WHEELS :

4 PU wheels of 6‖ dia shall be provided to the legs as per drawing. Out of which, two should have a break as per drawing.

6) COLOUR :


7) PACKING


The Stretcher with Trolley should be manufactured as per drawing No. MSSIDC/RCT/ST-2012-027.


SPECIFICATION OF STEEL HOSPITAL COT ( Drawing No. MSSIDC/RCT/ PHC-2012-028 )

1) OVERALL SIZE :

The overall size 2090 mm (L) x 915 mm (W) x 600 mm (H).

2) OUTER FRAME OF THE BED :

Rectangle tube CRCA 60 x 30 x1.5 mm thick, four position of I.V. Rod arrangement insert will be 14 mm dia copper pipe .Three number middle support of CRCA square tube 25 x 25 x 1.5 mm thick . Four corner 42 mm dia x 5 mm thick ERW round pipe with 8 mm tapping for bow mounting pipe, urine bag holder , provision for mosquito net pole arrangements on bed frame complete as per the drawing .

3) HEAD AND LEG BOW :

The bow should be made out of 32 mm dia X 1.5 mm (16 G Pipe),S.S.304 grade round pipe, 905 mm W x 270 mm H as shown in drawing, with 20 mm dia x 1.25 mm thick horizontal one round pipe and 20 mm dia x 1.25 mm thick three round vertical supports. All S.S. material Should be of 304 grade and with ARGON Welded complete with mirror polish bow.

4) TOP OF COT :

The top of the Cot should be made out of CRCA sheet 1.25 mm (18 G) thick. The sheet should be deep press bended hole perforation at equal interval. All four side double press bend 30 mm x 15 mm. The top shall have stiffener made out of 18G CRCA sheets size 105 mmx 27 mm .

5) LEGS :

32 mm dia x 1.5 mm thick vertical CRCA pipe. with widthwise horizontal support 20 mm dia x 1.5 mm thick. Sheet metal angle of 30mm x 60mm x 3mm thick sheet as shown in the drawing should be welded on top of the legs. Bottom Neopriane rubber shoes all nut will be nylock, bolt with zink platted.

6) COLOUR .:

Except for the stainless steel parts, all the metal parts should be coated with epoxy polyester powder of white /off white colour shade and coated film of minimum 50 micron. All metal parts should be thoroughly in house pretreated by individual hot deep tank process, including degreasing, pickling , phosphating, give phosphate coating conforming to IS 3618 – 1966 class C. The treated material should be then coated with epoxy polyester powder minimum 50 micron thickness (+ / - 0.5%) and oven backed at 180 to 200 centigrade. All these process must be done in-house only. These works cannot be outsourced.


7) PACKING :

The product shal be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / or plastic sheet / or gunny bag etc. as per standard practice and requirement of the product to avoid damages in transit.

Steel Hospital Cot should be manufactured as per Drawing No. MSSIDC/RCT/ PB-2012-028.


SPECIFICATION OF SEMI-FOWLER BED

( Drawing No. MSSIDC/RCT/ SFB-2012-029)

1) OVERALL SIZE :

The overall size 2090 mm (L) x 915 mm (W) x 600 mm (H). 2) OUTER FRAME OF THE BED :

Rectangle tube CRCA—60 x 30 x1.5 mm thick, four position of I.V. Rod arrangement. Insert will be 14 mm dia copper pipe .Four number middle support of square tube 25 x 25 x 1.5 mm thick CRCA. Four corner of bed 42 mm dia x 5 mm thick ERW round pipe with 8 mm dia tapping for bow mounted pipe . Urine bag holder , provision for mosquito net pole arrangements .on bed frame , outer frame welded bracket screw complete as per the drawing .


The bow should be made out of 32 mm dia X 1.5 mm (16 G Pipe),S.S.304 grade round pipe, 905 mm W x 270 mm H as shown in drawing with 20 mm dia x 1.25 mm thick horizontal one round pipe and three round pipe vertical supports 20 mm dia x 1.25 mm thick. All S.S. material should be of 304 grade and ARGON welded complete with mirror polish bow.

4) TOP OF COT :

The top of the cot should be made out of CRCA sheet 1.25 mm (18 G) thick. The sheet should be deep press bended hole perforation at equal interval. Fix panel of top. All four side double press bended 30 mm x 15 mm with stiffener of size 105 mm x 27 mm x 1.25 mm thick . Bending top head ( support ) to bottom side of panel ,back rest panel of outer frame is 25 mm dia x 1.5 mm thick. Back rest panel adjustment on screw mechanism with chrome -plated handle complete as per drawing .

5) LEGS :

32 mm dia x 1.5 mm thick vertical CRCA pipe widthwise horizontal support 20 mm dia x 1.5 mm thick. Sheet metal angle of 30mm x 60mm x 3mm thick sheet as shown in the drawing should be welded on top of the legs.Bottom Neopriane rubber shoe all nut will be nylock, bolt with zink platted.


6) COLOUR .:


7) PACKING :


SEMI-FOWLER BED should be manufactured as per drawing No. MSSIDC/RCT/ SFB-2012-029.


SPECIFICATION OF FOWLER BED

( Drawing No. MSSIDC/RCT/ FB-2012-032 )

1) OVERALL SIZE :

The overall size 2090 mm (L) x 915 mm (W) x 600 mm (H). 2) OUTER FRAME OF THE BED :

Rectangle tube CRCA 60 x 30 x1.5 mm thick, four position of I.V. Rod arrangement. Insert will be 14 mm dia copper pipe .Five number of middle support of CRCA square tube 25 x 25 x 1.5 mm thick .Four corner 42 mm dia x 5 mm thick ERW round pipe with 8 mm tapping for bow mounting pipe . Urine bag holder , provision for mosquito net pole arrangements on bed frame , outer frame welded bracket screw complete as per the drawing .


The bow should be made out of 32 mm dia X 1.5 mm (16 G Pipe) S.S.304 grade round pipe, 905 mm W x 270 mm H as shown in drawing with 20 mm dia x 1.25 mm thick horizontal one round pipe and three round pipe vertical supports of 20 mm dia x 1.25 mm thick. All S.S. material should be of 304 grade and ARGON Welded complete with mirror polish bow.

4) TOP OF COT :

1) Panel No. 1 (back panel ): Top of panel should be made out of 1.25 mm thick CRCA sheet fixed with frame made out of round pipe of 25 mm dia x 1.25 mm thick CRCA pipe . Middle support for screw mounting arrangement of 25 x 25 x 5 mm thick angle.

2) Panel No 2 (fixed panel ): Top of panel should be made out of 1.25 mm thick CRCA sheet fixed with frame made out of round pipe of 25 mm dia x 1.25 mm thick, widthwise square pipe and both the end 25 x 5 mm thick bright flat welded panel bolting arrangement to the panel no 3.

3) Panel No. 3 (movable panel ): Top of panel should be made out of 1.25 mm thick CRCA sheet double press bend with fixed side support of pipe 25 x 25 x 1.5 mm thick square pipe , width wise bright flat 25 x 5 mm to be welded on the panel and square tube bolting arrangement with screw mechanism as per the drawing.

4) Panel No. 4 (knee rest panel ): Top of panel should be made out of 1.25 mm thick

CRCA sheet. Outer frame made of round pipe of 25 mm dia x 1,25 mm thick, CRCA pipe attached with 10 mm round M.S. bar leave back resting on slotted flat.


5) LEGS:

32 mm dia x 1.5 mm thick CRCA pipe with one horizontal support 20 mm dia x 1.5 mm thick . Sheet metal angle of 30mm x 60mm x 3mm thick sheet as shown in the drawing should be welded on top of the legs. Bottom Neopriane rubber shoe, all nut will be nylock, bolt with zink platted.

6) COLOUR .


7) PACKING


FOWLER BED should be manufactured as per drawing No. MSSIDC/RCT/ FB-2012-032.


SPECIFICATION OF HOSPITAL BABY COT

(DRAWING No.MSSIDC/RCT/ BC-2012-031)

1) OVERALL SIZE :

The overall size of the bed should be 1321 mm (L) X 755 MM (W) X 610 (H). 2) HEAD BOW/ LEG BOW :

The Head bow & Leg bow should be made out of 32 MM dia 1.5mm thick CRCA Pipe. The height of the head bow and leg bow should be 1220 mm from the floor. The Head bow/Leg bow should be provided with 1 no. of CRCA 25 mm dia pipe 1.5 mm thickness welded horizontally with six vertical supports made out of CRCA 13 mm dia pipe of 1.5mm thickness. The Head bow/Leg bow should be provided with arrangement for fixing of mosquito frame. The Head bow/ Leg bow should be provided with arrangement for resting of drop side by attaching two MS Rod hooks. The Head bow/Leg bow should be provided with rubber/nylon shoes.

3) TOP OF COT :

The top of the Cot should be made out of perforated CRCA sheet 1.25 mm thick. The top should be attached to the head bow and leg bow with the help of four nos. of brackets. The top should be fitted with four nos. of tubes for sliding of drop sides. The sheet should be deep pressed bended hole perforation at equal intervals.

4) DROP SIDE :

The overall sizes of the drop sides shall be 1500 mm (L) and 450mm (H). The drop sides shall be manufactured out of two nos. of CRCA 18mm dia 1.25mm thick. Both the pipes shall be welded together with the help of CRCA 8 mm dia bright bars as shown in the drawing. The two nos. of drop sides should be provided on both the sides of the cot.

5) BRACKETS :

The top should be fixed to the head bow and leg bow with the help of four brackets. The size of the brackets should be 100 mm x 50mm x 5mm thick. The one side of the bracket shall be welded to the both the bows of the cot and the top shall be fitted with the help of two numbers of nylock nut on each bracket .


6) COLOUR :


7) PACKING :


The hospital baby cot should be manufactured as per drawing No. MSSIDC/RCT/ BC-2012-031.


SPECIFICATION OF MATRESSES FOR HOSPITAL COT, SEMI-FOWLER BED ,

FOWLER BED & BABY COT. Specification No.MSSIDC/RCT/CM-2012

Rexin bound rubberized coir mattresses for use on hospital beds confirming to IS5029-1979 The mattresses shall consist of a rubberized coir sheet of 63+5/-1 mm thickness with a sheet of flexible Polyurethane foam of 13+3/-3 mm thickness ision of gluded to its top. The thickness of complete mattrsses shall however be subject to the provision of clause 3 of this specification.

The rubberized coir sheet shall confirm Medium Grade of IS 8391-1977.

The flexible polyurerthane foam sheet shall confirm to IS 7933-1975. Rubberized coir sheet & the flexible polyurethane foam sheet shall be uniformly joined by latex rubber glue. The Rubberized coir side of the mattresses shall not have any protruding coir edges.

The side edges of rubberized coir sheet shall reinforced with a strip of 7 or OZ hessian cloth which shall be pasted on it with latex rubber glue. This cover strip shall extend to at least 50 mm over the top & bottom side of the mattresses, around its perimeter.

Each mattresses shall be completely enclosed in jacket of rexine. Hard foam ST grade II, guage 80 with navy blue colour in such a manner that the mattresses shall not be able to move freely inside the jacket. The jacket shall be tight enough not to allow pinching by fingertips.It shall however be pinchable with the tip of the nail. The jacket shall be stitched tightly all around the mattresses in such a manner that no part of the mattresses shall be visible without removing the stitches. The edges of the jacket shall consist of a piping made by passing a cotton or jute twine through a fold in the cloth. The bottom of this fold shall be closely stitched to give the elevated piping.All mattresses shall be designed, manufactured as per requirement suitable to Plain Hospital Cot in one piece, for Semi-Fowler Bed with one fold and for Fowler Bed with 2 folds. The stitching shall be done with thread of griffon 40 grade.


TIME SCHEDULE OF THE TENDER

1 TENDER NO. MSSIDC/RCT/06/STEEL FURNITURE/2014-2015

2 COST OF TENDER FORM RS.2000/- Non-refundable, by D.D. in favor of MSSIDC

LTD OR by cash

3 SALE OF TENDER

DOCUMENTS AND PERIOD FOR SUBMISSION OF DD /CASH TOWARDS THE COST OF BLANK TENDER

From 21.4.2014 to 12.5.2014. The prospective bidders will be authorized to download the tender from the website https://mssidc.maharashtra.etenders.in. only after the bidders have deposited the Demand Draft/ by cash towards cost of blank Tender form as mentioned above.

4 LAST DATE FOR SUBMISSION OF SAMPLES

On or before 21.5.2014 upto 15.00 Hrs at Divisional Offices of the Corporation as per Annexure ‘I’

5 PRE BID MEETING Pre bid meeting will be held on 29.4.2014 at 3.00 P.M. at M.S.S.I.D.C.Ltd., Krupanidhi, 9 Walchand Hirachand Marg, Ballard Estate, Mumbai.

6 SCHEDULE OF E-TENDERING ACTIVITY

Sr.

No.

Activities Start Expiry

Date Time Date Time

1 Online Tender Release 16.4.2014 10:00 Hrs 21.4.2014 16:00 Hrs

2 Online Tender documents download

21-4-2014 16:01 Hrs 12.5.2014 17.00 Hrs

3 Online Bid preparation 21.4.2014 16:01 Hrs 21.5.2014 17:00 Hrs

4 Online Technical bid closing 21.5.2014 17:01 Hrs 23.5.2014 17:00 Hrs

5 Online Commercial bid closing 21.5.2014 17:01 Hrs 23.5.2014 17:00 Hrs

6 Online submission of Bid 23.05.2014 17:01 Hrs 28.5.2014 17:00 Hrs

7 Online Tender opening (Technical)

29.5.2014 10:00 Hrs 30.6.2014 17:00 Hrs

8 Online Tender opening (Commercial)

29.5.2014 10:00 Hrs 30.6.2014 17:00 Hrs

NOTE : All bid related activities (process) like tender download, bid preparation , bid submission and bid opening will be governed by time schedule under the key dates mentioned in above schedule. The venue for opening of bids and pre bid meeting will be at Head Office Mumbai.

https://mssidc.maharashtra.etenders.in/


As per Annexure 11, Clause No. 05 of the Government Resolution No. SPO-1088 (2512)/IND-6 dated 2.1.1992 issued by Industries, Energy & Labour Department, Mantralaya, Mumbai, the item of Steel Furniture is reserved for purchases from small scale industries exclusively and on the rate contract from MSSIDC only. Further, as per said G.R., MSSIDC is allowed to supply steel furniture through Medium and Large Scale Industries, as and when the capacity of small scale industries to produce & supply steel furniture is over. Therefore, in accordance with the G .R. No.SPO-1088/(2512)/IND-6 dated 02.01.1992 issued by Government of Maharashtra, the General Manager ( Marketing), Maharashtra Small Scale Industries Development Corporation Limited, ‗Krupanidhi‘, 9, Walchand Hirachand Marg, Ballard Estate, Mumbai 400 001, invites online digitally sealed tenders in Two Bid System from small, medium & large scale industries, for finalization of Rate Contract for supply of STEEL FURNITURE for the year 2014 – 15

1. INSTRUCTIONS TO THE TENDERERS 1.1 The tenders shall be submitted online through ―e‖ tendering process only. No

tender will be accepted manually or through fax etc. 1.2 The tender form will be available online only. No tender form shall be sold/issued

manually from any of the office of the MSSIDC. 1.3 The tender document will be uploaded / released on Govt. of Maharashtra e-

tendering website https://mssidc.maharashtra.etenders.in . The tenderer is required to download the tender document from this website as per the schedule of activities for online tender document download.

1.4 The tenderer has to pay the cost of the tender document by a demand draft drawn in favour of MSSIDC Ltd. at any of the Divisional Offices. To download the tender document from the website, the tenderer is required to fill the details of the demand draft he has drawn towards the cost of the tender documents. The tender documents downloaded without filling the details of the demand draft of tender cost shall not be considered as valid tender document.

1.5 At the time of downloading the tender, the tenderer has to fill the details of demand draft towards the cost of the tender documents and generate e-receipt. If e-receipt is not generated, then tenderer will not be able to upload the tender document and the Corporation will not be responsible , if the tenderer fails to upload the tender document due to non generation of e-receipt.

1.6 The tenderer is required to deposit the demand draft drawn towards the cost of

the tender document at any of the Divisional Offices of the Corporation on any working day (excluding Saturday, Sunday and Govt. holidays between 10.30 a.m. to 5.00 p.m., as per the addresses given at Appendix No.02



1.7 The tenderer is required to get photo copy of the demand draft which he has drawn towards the cost of tender and upload the photo copy of the demand draft at the time of uploading the documents required for technical bid.

1.8 The tenderer is required to download the tender document within the schedule of activity for online tender document download. After expiry of the date and time for tender document download, the Corporation shall not be responsible for any failure on the part of tenderer for not downloading the document within the scheduled time even though he has paid the cost of the tender to the Corporation. In such case, the cost of the tender paid by the tenderer shall not be refunded.

1.9 During the activity of bid preparation, the tenderer is required to upload all the

documents mentioned in the terms & conditions of the technical bid by scanning the documents and uploading it in the PDF format or Zip file. This activity of uploading the documents as well as preparation of commercial bid and other Appendices enclosed with the tender, shall be completed within the schedule given for bid preparation. The tenderer will not be able to submit the technical as well as commercial documents after closing of bid preparation as per time schedule.

1.10 After bid preparation, the tenderer is required to submit the bid again during the

activity of submission of bid without which the tender will not be submitted.

1.11 Tenders submitted online will be opened on the schedule date before the participants. At the time of opening of the technical bid the tenderer should bring all the original documents which has been uploaded along with the technical bid so that same can be verified at the time of opening of technical bid, if required by the tender opening committee. If the tenderer fails to produce the original documents at the time of opening of technical bid then the decision of the committee taken on the basis of document uploaded will be final and binding on the tenderer.

1.1 1.12 As the tenders are invited online, tenderers are required to upload tender

as per the schedule given. The Corporation is not responsible for failure on the part of tenderer to upload tender within the time schedule. In case of any help required for this purpose, the tenderer shall contact to help line of e-tendering agency M/s. Sify Nex Tenders on telephone nos. 020- 253 155 55, , 56 & 022-26611117(Extn.25/26) M – 9167969601 & 04

Tenderers are requested to go carefully through the process of e-tendering given on the website of https://mssidc.maharashtra.etenders.in, to avoid disqualification of their tender on any ground.

1.13 The tenderer is required to pay tender processing fee of Rs.1038.00 per tender

to e-tendering agency, M/s. Sify Nex Tenders, at the time of filing of their tender through e-payment i.e. through credit card/debit card/net banking. Details of



different modes of online payment to e-tendering service provider is as per Appendix No.10. Non payment of fees will result in non submission of the tender and Corporation will not be responsible if the tenderer is not able to submit their offer due to non payment of processing fees to the e-tendering agency.

1.14 Any amendment to the tender will be placed on the e-tendering website of the

Govt. of Maharashtra. The tenderer will not be communicated separately regarding the amendment. The tenderer should download the amendment. The signed and sealed copy of amendments shall be uploaded during uploading of technical bid as it is being a part of technical documents. However, if the tenderer fails to upload these amendment ,then it will be presumed that the tenderer has quoted his/ her rates by taking the note of these amendments.

2 SUBMISSION OF THE TENDER

The tender is divided in two parts and required to be submitted online only . Technical Bid (PART I) - Contains technical information such as detail drawings and technical specifications, terms & conditions of the tender, documents required to be submitted to become qualified for opening of commercial bid, special terms & conditions of the tender, general terms & conditions of the tender, instructions to the tenderer for submission of the tender, other Appendices required to be submitted by the tenderer along with the technical bid, confirmation to tender terms & conditions. Detailed specification & drawing of the tendered items shall be as per Appendix No.01. Commercial Bid (PART II ) - Contains price bid to be filled in by the tenderer.

3 TECHNICAL BID( PART I)

Technical bid shall contain following Compulsory documents duly certified by Gazetted Officer or Divisional Manager or Deputy Manager, MSSIDC Ltd. These documents shall be in the form of PDF files / scanned image, if required in Zip file. These documents needs to be digitally signed by the tenderer and uploaded in the technical bid during online bid preparation stage.

a) A Copy of Demand Draft drawn in the name of M.S.S.D.C.Ltd . towards the

cost of blank tender documents.

b) The tenderer participating first time or not holding the rate contract of the Corporation for the year 13-14 has to pay factory inspection charges of Rs.10,000/- by demand Draft drawn in the name of M.S.S.I.D.C.Ltd to ascertain capability and capacity of the tenderer to manufacture tendered items, shall be deposited at any Divisional Office of MSSIDC and copy of demand draft shall be uploaded in technical bid. The Inspecting authority will carry out inspection of the factory to ascertain capability and capacity


of the tenderer to manufacture tendered items. The tenderer who will be approved by the inspecting agency during factory inspection, will only be taken for consideration for opening of commercial bid.

Tenderer participating for 1st time in the tender i.e. tenderers to whom earlier 2012-13 &

2013-14 RC for supply of steel furniture for even one of the following category was not

awarded, are required to submit DD of Rs. 10,000.00 towards inspection charges.

1(a) Supply of steel furniture with spray paint

1(b) Supply of steel furniture with powder coating

1(c ) Supply of Hospital furniture with powder coating

1 ( d) Supply of steel and hospital furniture with CNC machine

In other words, if any tenderer is awarded RC for 1 (a) category mentioned above

and now he wants to participate in RC for 1(b) category, such tenderer is required to

submit DD of Rs. 10,000.00 towards inspection charges.

c) A Copy of separate acknowledgement towards receipt of samples by the Divisional Office, clearly stating 1) Office Furniture / School Furniture with spray paint , 2) Office Furniture / School Furniture / Hospital Furniture with powder coating , 3) Office Furniture / School Furniture / Hospital Furniture manufactured on CNC operated machinery.

d) i) SSI unit : A copy of Permanent SSI Registration Certificate issued

by Director of Industries, Government of Maharashtra, in favour of the unit for tendered item (Complete set ).

ii) Medium & Large Scale unit : A copy of Registration Certificate issued by Competant Authority.

e) Copy of PAN card in the name of firm in case of Partnership or Private

Limited Company or in the name of Proprietor in case of Proprietary firm. New tenderers who have not completed one year of production on the date of opening of the tender shall be exempted from submission of PAN card Such tenderer shall furnish duly acknowledged copy of the application made to the IT authorities for permanent account number, under Income-Tax Act.

f) Copy of Value Added Tax (VAT)/TIN Registration Certificate. g) Value Added Tax (VAT) Clearance Certificate as on 31.12.2013 in Form

No.415 . In case the Value Added Tax Clearance Certificate in Form No.415


valid on the date of opening of the tender is not uploaded , a copy of application in Form No.414 submitted to Sales Tax Department for issue of Value Added Tax Clearance Certificate should be uploaded. However, the units should submit the Value Added Tax Clearance Certificate before 11.00 a.m. on the scheduled date of opening of commercial bid.

h) E.M.D. : A copy of Demand Draft Drawn in the name of MSSIDC Ltd.,

towards the Earnest Money Deposit of Rs.50,000/-. This is applicable to Medium or Large Scale Industries only as Small Scale Industries are exempted from payment of EMD as per G.R. SPO.1088 /(2512)/ IND-6 dated 02.01.1992.

N.B. : If any of the documents from the compulsory documents as mentioned above are not uploaded in the technical bid ( Part – I ), such tender will be treated as invalid

3.1 ADDITIONAL DOCUMENTS TO BE SUBMITTED BY THE TENDERER

(i) Statement indicating last 3 years sales turnover / Balance Sheet duly

certified by Chartered Accountant, ( Not applicable to new units i.e. unit who have not completed one year of production on the date of opening of the tender.). Units completing less than 3 years are required to submit statement for the completed years, duly certified by C.A.

(ii) If the tenderer is awarded rate contract by DGS&D, then copy of rate contract should be submitted in the technical bid. If the rate contract is not awarded by DGS&D then the undertaking as per per appendix no. 04 on the letter-head duly signed & sealed and upload the same in technical bid.

(iii) A copy of the statement indicating existing plant & machinery, testing facilities installed in the factory duly certified by the Chartered Accountant with his seal and signature indicating registration number of the C.A.

(iv) Tenderer has to upload details as per Appendix 06, 07, 08, 09 in the given format.

(v) The unit participating in the tender shall fill all information in the enclosed appendix No.03 and upload the same in technical bid.

(vi) In cases where mistakes / lapses are observed in respect of VAT clearance and additional documents / certificates as specified, submitted with Technical Bid, the concerned tenderer should submit / rectify the same before 11.00 a.m. ( Eleven A.M. ) on the due date of opening of the Envelope – II i.e. Price Bid failing which such tenders shall be deemed to be invalid and Price Bid of such tenderers shall not be opened. Name of disqualified tenderers will be announced before opening of the Envelope – II.


(vii) Tenderers submitting insufficient information and / or not fulfilling tender

conditions and / or not accepting conditions specified in the tender shall be liable for disqualification and Price Bid submitted by such tenderers in Envelope II shall not be opened.

(viii) Tenderer will have to upload self declaration in Appendix -11, that their unit

is not black listed by MSSIDC or any Govt./Semi Govt. Department etc.

3.2 SPECIAL TERMS & CONDITIONS OF THE TENDER.

(i) Submission of sample

a) The tenderers are required to submit samples of the items for which rate is quoted in the tender as per specification given in Appendix No.05 . The sample shall be submitted to Head Office or any Divisional Office of MSSIDC. The tenderer should get the details of the place where the samples are to be submitted from the concerned Divisional Office / Head Office. The sample submitted by the tenderer , will be got inspected from the Inspection Agency and only offer of the approved sample of the tenderer will be taken for consideration. Details of groupwise samples to be submitted are as per Appendix No.05.

b) The sample if damaged during storage / inspection, the tenderer shall not complain about the same and that no compensation will be paid on this account.

c) Inspecting authority is advised to put permanent mark for accepted/

approved samples at prominent place and shall not be scratchable / removable and shall be temper proof.

d) It is the responsibility of the tenderer to preserve the accepted / approved

samples at their factory site till the completion of contractual period for verification / inspection as and when required.

e) Tenderer should bear all the costs for preparation, transport of the samples

to inspection site and back to factory site. (ii) PRE-DESPATCH INSPECTION :

As per Government Directives, pre-despatch inspection of the stores shall be carried out at tenderer‘s factory premises by independent Govt. Inspection Agency i.e. Govt. Engineering College / Govt. Polytechnic and any other inspecting agency as per the choice of the MSSIDC Ltd / Indenter / Consignee. Inspection charges, if any, shall be borne by the tenderer.


(iii) CAPABILITY ASSESSMENT

The tenderer unit during capability assessment should present original documents for verification. All the machinery available with the tenderer unit should be in good working conditions. The tenderer unit should give objective evidence of their process capacity of manufacturing furniture in question, to the governing specifications.

(iv) PACKING

The product shall be packed in such a way that no damage is caused to them during the transit i.e. each product is to be properly packed in corrugated sheets / plastic sheets / gunny bas etc. as per standard practice and requirement of the product to avoid damages in transit.

(v) INSPECTION CUM CERTIFICATE OF ACCEPTANCE (DELIVERY CHALLAN):

Unit should ensure that product is delivered without damage and have been accepted by the purchaser (consignee) or its authorized person, unconditionally. Thereafter, Inspection cum Certificate of Acceptance (Delivery Challan) should be obtained , in the prescribed format of MSSIDC, from the purchaser (consignee) or its authorized person along with his name, signature & seal and the same shall be submitted along with invoice (bill).

(vi) MARKING ON PRODUCT

As far as possible, all products shall be embossed at front side, at lower position of doors of storage unit or at visible place for other items, but in no case embossing shall be done at under side of the top or bottom of the product. The embossing shall include :-

‗MSSIDC / ______________________ / __________________‘ (Financial year of supply ) (Manufacturer‘s name)

e.g. 1) Cupboard supplied by M/s YYY in the month of March, 2014 shall be embossed as follows :

‗MSSIDC/2014-15/M/s YYY‘

e.g.2) Cupboard supplied by M/s YYY in the month of April, 2014 shall be embossed as follows :


‗MSSIDC/2014-15/M/s YYY‘ The product delivered without marking on the product as above, will not be considered as delivered and payment will not be made.

(vii) BILL OF MATERIAL:-

The item wise bill of material shown in the specifications and drawings is indicative only.

(viii) ESTIMATED RATES:-

The estimated rates given in the rate schedule are based on current market rates of raw material and are indicative only. If the tenderer quotes rate 3% below / above estimated rate, then tenderer is required to submit detailed rate analysis. If the rate analysis submitted by the tenderer is not justifiable, then in such cases MSSIDC reserves the right not to award rate contract for such items to the tenderer.

(ix) INSPECTION CHARGES FOR CAPABILITY & CAPACITY ASSESSMENT Tenderer participating in the tender for rate contract for supply of steel furniture and computer furniture are required to pay Rs.10,000/- towards inspection charges for capacity and capability assessment of unit to manufacture the tendered furniture. Tenderer participating both the tenders are required to submit only one D.D. of Rs.10,000/- towards inspection charges.

3.3 LIST OF MACHINERY

The units participating in the tender must have following machinery installed at factory address mentioned in the Permanent SSI registration issued by District Industries Centre in case of SSI units and in case of Medium & Large Scale Industries issued by Competent Authority.


A (1) LIST OF MACHINERY FOR UNIT QUOTING FOR SPRAY PAINTED OFFICE

FURNITURE & SCHOOL FURNITURE

Sr.

No

Name of machinery

1 Shearing machine

2 Straightening Machine

3 Welding transformer machine

Electric / Gas / Spot

4 Fly Press machine – Power press / Hand press

5 Drill machine

6 Bench Grinder machine

7 Gauges

8 Vernier, Micro meter

9 Tanks

10 Gun with compressor

11 Oven baking facility

12 Sheet bending machine – minimum 7 feet length

13 Pipe bending machine – Manual or motorize or hydraulic


A(2)LIST OF MACHINERY FOR UNIT QUOTING FOR POWDER COATED OFFICE

FURNITURE & SCHOOL FURNITURE

Sr.

No

Name of machinery

1 Shearing machine

2 Straightening Machine

3 Welding transformer machine


4 Fly Press machine – Power press / Hand press

5 Drill machine

6 Bench Grinder machine

7 Gauges

8 Vernier, Micro meter

9 Tanks

10 Gun with compressor

11 Oven baking facility

12 Sheet bending machine – minimum 7 feet length

13 Pipe bending machine – Manual or motorize or hydraulic

14 Powder Coating Plant (complete with gun, booth and baking plant)


A(3) LIST OF MACHINERY FOR UNIT QUOTING FOR ITEMS OF HOSPITAL

FURNITURE

Sr.

No

Name of machinery

1 Hydraulic shearing machine – minimum size 2450 x 4mm

2 Hydraulic bending machine – minimum size 2450 x 4mm

3 CO2 welding machine

4 Argon welding machine

5 Mechanical / power fly press machine

6 Pop rivet machine

7 Buffing machine with flexible shaft

8 Motorized pipe bending machine

9 Powder Coating Plant (complete with gun, booth and baking plant)

10 Drill machine

11 Bench grinder machine

12 Gauges

13 Welding transfer machine –


14 DFT meter (gauges) for powder coating

N.B. : 1) Machinery for hospital furniture as shown above is must for the tenderer

quoting rates for supply of hospital furniture, without which their offer for hospital

furniture will not be considered.


A(4) List of machinery for unit quoting for item of item manufactured by operating CNC machine , to manufacture tendered items i.e. Office Furniture / School Furniture / Hospital Furniture

MACHINE SHOP

Sr.

No

Name of machinery

1 N.C. Shearing machine (Min. 8‘ length)

2 C.N.C. Press Break (Min. 8‘ length)

3 Power press (100 Tune capacity )

4 Straigthening machine

5 Electric welding machine

6 A.R.C. welding machine

7 M.I.G. welding machine

8 Pneumatic spot welding

9 Argon welding machine

10 Co2 welding machine

11 Pipe bending machine (upto 38 mm) with dies.

12 Bench drill (25mm)

13 Bench grinder (150 mm wheel)

PAINT SHOP

1 Phosphating tanks (Min. 7 tanks) for pre treatment

2 Oven with air circulating & temp Control facility

3 Powder painting equipment

4 Powder painting booth with multi-cyclone

5 Pallet trolley hydraulic

6 Track with trolley

7 Trolley for oven

8 Prefeed container

9 Polisher machine

10 Compressor

11 Water fall down draft painting booth

12 Gantery stand with trolley & chain pulley

Quality control facilities : The following important measuring testing

equipments must be available in the unit.

1) Micrometers 0 to 25 mm with least count of 0.01mm.

2) Vernier Calipers 150/200 mm with least count of 0.02 mm.

3) Steel measuring scales 24‖ long Tape.

4) Thickness measuring gauge (3ml) for measuring powder coating

thickness.

5) Sheet thickness dial gauge.


4. SPECIFICATIONS & PRICE BID.

(i) Specifications :

As per Appendix No. 01 enclosed with part I of the tender.

(ii) Rates : a) The rates should be quoted per number basis in the Appendix No. A-01. A-02, A-03 as follows :

A-01 : Rates for supply of Office Furniture, School Furniture with spray paint. A-02 : Rates for supply of Office Furniture, School Furniture & Hospital Furniture with powder coating. A-03 : Rates for supply of Office Furniture, School Furniture & Hospital Furniture, manufactured on CNC operated machinery.

b) (i) Rate quoted should be fixed & firm and inclusive of Free Delivery of Stores at consignees stores / site anywhere in Maharashtra, inclusive of VAT, excise duty, packing, transit insurance, loading & unloading charges, stacking of the goods at consignees store / site, excluding Local Body Tax (LBT) / octroi charges and local levies.

(ii) Rates quoted should be exclusive of Local Body Tax (LBT) / octroi

charges and local levies. These charges at actual shall be reimbursed by the consignee who are not entitled to issue LBT / Octroi Exemption Certificate / Exemption from local levies.

5. GENERAL TERMS & CONDITIONS (1) MSSIDC ROLE :

Vide Govt. Resolution No.SPO – 1088 / (2512) / IND-6 dated 2.1.92 State Govt. has designated MSSIDC as the Govt. agency to finalize this tender and operate the Rate Contract with approval of the Stores Purchase Committee of the Government.


(2) RESERVATION OF ITEM :

Vide Govt. Resolution No.SPO – 1088 / (2512) / IND-6 dated 2.1.92 State Govt. has reserved the item of Steel Furniture‘s for exclusive purchase through SSI unit from Maharashtra on rate contract. However, MSSIDC is allowed to supply steel furniture through medium and large scale industries, as & when capacity of SSI units to produce & supply furniture as per rate contract rates, terms & conditions is over.

(3) PRICE VARIATION:

No Price variation on any account (statutory or otherwise) shall be admissible during the currency of the contract or thereafter. Tenderer shall have to supply the stores at contracted rates, terms & conditions during the currency of the contract.

(4) MANUFACTURE OF GOODS :

It is a specific condition of the tender that the tenderer shall possess the necessary plant & machinery of the requisite capacity and testing equipments / facilities for manufacture and testing of the entire specified quantity of the goods which confirm to the specifications/standards indicated in the tender and shall manufacture the same himself for execution of orders under this tender. If it is subsequently discovered that the renderer has not complied with this condition, MSSIDC shall be entitled to unilaterally terminate this contract and blacklist the renderer from participating in future tenders for supply of goods for such period as may be deemed necessary from the date of such blacklisting. This shall be in addition to the other remedies to which the MSSIDC can resort to.

(5) ACCEPTANCE OF TENDER :

a) MSSIDC reserves the right to accept any tender which has been deemed to be substantially responsive.

b) MSSIDC also reserves the right to offer rate approved by Central Store

Purchase Committee of Govt. of Maharashtra to all eligible tenderer subject to acceptance by tenderer to supply the material as per the specifications, terms and conditions of the tender at approved rate.

(6) ACCEPTANCE OF ORDER :

On awarding the Rate contract, the tenderer is required to supply the stores only through MSSIDC Ltd. The tenderer also confirms and agrees that he will not undertake nor supply directly the tendered stores to any of the indenting depts. The tenderer further undertakes and confirms that he will not quote lower rates to any of the Central/State Govt./Semi- Govt. Departments, organizations, undertakings, etc. than the rates of Rate Contract accepted by the


tenderer. Despite this commitment and undertaking, if it is observed and noticed that without the prior knowledge and approval of the corporation, the tenderer has quoted the lower rates for supply of stores, then the tenderer is liable for penal action as the Corporation may deem fit and necessary, including cancellation of the tenderer‘s contract and dis-associating unit from the Corporation‘s Marketing Assistance Scheme.

(7) DELIVERY OF STORES :

a) i) The stores ordered under the Rate Contract should be dispatched by the unit to the indenter/consignee only after its due inspection and approval by the nominated inspection agency or consignee representative as the case may be. Copy of the inspection report should be furnished to the consignee/indenter along with the stores.

ii) If consignee desires to carry out the inspection of stores by their representative, in addition to the inspection by inspection agency appointed for the purpose, consignee may do so at their own cost.

b) Date of offer of stores for inspection made by the contractor in writing shall be taken as date of delivery of material for the purpose of considering delivery period subject to the conditions that :

i) Inspection call letter is sent along with inspection fee & acknowledgement obtained thereon (fee not required to consignee inspection) at least 15 days in advance before expiry of the delivery period.

ii) Delivery of the stores is completed within 15 days from the date of Inspection Report.

(8) DELIVERY PERIOD :

The stores ordered should be manufactured, inspected and delivered to the consignee site/stores within a period of 30 days from the date of placement of order or delivery period fixed depending upon quantum of order mutually decided.

(9) DELIVERY PERFORMANCE :

a) If unit fails to supply the stores within the delivery schedule further orders shall not be placed with him till such time the pending orders are serviced.

b) The unit will be liable for dis-qualification for further orders, if he fails thrice to adhere to the quality as well as delivery schedule such unit‘s orders in hand will be cancelled and material will be supplied through other eligible unit, at such unit‘s risk & cost.


(10) AGREEMENT & SECURITY DEPOSIT :

Tenderer accepting the contract is required to –

a) Pay security deposit of Rs. 50,000/- in form of Demand Draft or FDR/TDR drawn in the name of MSSIDC Ltd. or pledged in favour of MSSIDC duly released by the drawer. No interest will be paid on Security Deposit.

b) Execute the agreement in the prescribed format on Rs.100/- Stamp Paper. (11) PERIOD OF THE CONTRACT :

The tenders are invited for fixing of Rate Contract for a period up to 30.6.2014 and the same can be extended for a period of two months at such rates and terms as may be mutually agreed upon.

(12) DRAWAL OF STORES :

Drawal of quantity of stores against the rate contract is not guaranteed and not binding on Corporation.

(13) VALIDITY OF THE OFFER :

The validity of the offer shall be for 120 days from the date of opening of Envelope No. II. The validity of these tenders can be further extended if required with the consent of tenderers.

(14) JURISDICTION :

As the tender is floated and finalized by MSSIDC in Mumbai and MSSIDC has registered office in Mumbai, for any legal dispute arising out of this tender, Courts in Brihan Mumbai will have exclusive jurisdiction.

(15) PAYMENT TERMS :

Those units who have been awarded the Rate Contract will be considered for placement of order by issuing supply orders in the prescribed form of the Corporation. The payment term mentioned in the supply order are applicable to the tenderer. As per the terms and condition of the supply order, the tenderer is eligible to receive the payment as and when the Corporation receives the payment from the consignee against the supplies.


(16) RECOVERY OF DUES :

Whenever any claim arises for the payment by reason of default by the unit , MSSIDC shall be entitled to recover such amount by appropriating (in whole or part) any amount retained by MSSIDC on behalf of the unit and/or any amount due to the unit from any of the Govt. consignee on any account whatsoever. If such appropriated sum is not sufficient to cover the full amount recoverable/due from the unit, the unit shall on demand pay to the MSSIDC the balance amount due.

(17) FALLS CLAUSE :

It is a condition of the contract that all through the currency of the rate contract with MSSIDC, the Rate at which rate contract holder would supply the stores to any customer shall not be lower than the rate contract rate and in case the stores are supplied by the Rate contract holder at lower rate (lower than the Rate Contract rate), all subsequent supplies made to MSSIDC under the Rate contract will be deemed to have been made at such lower price changed by RC holders to other and he shall be paid accordingly as such lower price. It shall be mandatory on the part of Rate Contract holder to promptly furnish such information in writing to MSSIDC and obtain acknowledgement thereof, failing which it shall be deemed to be breach of Rate Contract and RC holder shall make himself liable for the action as may be deemed necessary including debarment from the existing contract and participation in future Rate contracts for such period as may be decided by MSSIDC.

(18) GUARANTEE / WARRANTY :

The tenderer should give warranty that the stores supplied under the rate contract shall be strictly in accordance with the specifications and shall guarantee that stores supplied shall continue to confirm to the description, specification and quality for a period of 12 months from the date of receipt of stores by the indenter/consignee.

(19) REPLACEMENT OF DEFECTIVE STORES : The contractor shall replace defective stores with stores conforming with the specifications laid down in the tender within 15 days from the date of receipt of letter from Corporation for replacement of defective stores.

(20) FORCE MAJEURE CLAUSE : If at any time during the continuance of this contract, the performance in whole or in part by either party of any obligation under this contract shall be prevented or delayed by reason of any War, Hostility, Act of Public Enemy, Civil commotion, Sabotage, Fire, Floods, Explosions or any other acts beyond its control being acts of God (hereinafter referred to as ‗events‘) it shall immediately give a notice of the same to the other party.


In case the unit pleads that he is delayed or prevented either wholly or partially from performing his part of the contract by giving the notice as aforesaid, the MSSIDC shall verify and satisfy itself the occurrence/continuance of such events and take such of action as may be deemed necessary and the action so taken by MSSIDC shall be binding on the tenderer.

(21) LIQUIDATED DAMAGES : In case the unit fails to deliver the stores of any consignment thereof, within the contracted period of delivery or in case the stores are found not in accordance with the prescribed specifications and/or approved sample, the MSSIDC shall exercise its discretionary power either –

a) to recover from the unit as liquidated damages , sum equivalent to ½% of the price of the undelivered stores at the stipulated rate for each week or part thereof during which the delivery of such stores may be delayed subject to a maximum limit of 10% of value in case of any order not exceeding Rs.1 lakh and 5% of value in case of an order exceeding Rs.1 lakh at the stipulated price of the stores so ‗undelivered‘.

MSSIDC shall be entitled to deduct/recover the amount of liquidated damages from the current bill payable to the unit or any other amount due as payable to him against this or any other amount due as payable to him against this or any other contract from MSSIDC or from any of the Govt. consignee.

OR

To cancel the contract and to purchase elsewhere on unit‘s account the stores so undelivered at the risk and cost of the contractor. In addition to this, to take any other action as may be deemed necessary including blacklisting of the unit , forfeiture of security deposit, etc.

(22) REBATE PAID TO MSSIDC :

The tenderer on awarding of the contract shall supply the stores / material only through MSSIDC. The tenderers are required to pay rebate at the rate of 6% of the bill value excluding VAT to MSSIDC.

(23) TENDERERS OBLIGATION OF EXECUTION OF CONTRACTORS ORDER AND PAYMENT OF REBATE THEREOF :

On awarding the contract, it will be binding on the successful tenderer units to execute the orders received from the Contractors against Government/Semi Government Contracts through the Corporation only and in no case such orders will be executed directly. In case it is observed that the orders are executed directly it will be treated as breach of the Contract and the name of such unit will be deleted from the Rate Contract.


The successful tenderer unit on awarding the Rate Contract, accepting the orders from the Corporation towards supply of the materials to the Contractors against Rate Contract will be liable to pay the rebate irrespective of their execution or non-execution of order once the same has been accepted by them and not cancelled by MSSIDC.

(24) GOVERNMENT DIRECTIVES : All specific govt. directives concerning Govt. Purchase Program as have been issued from time to time shall be applicable irrespective of the fact that it has not been incorporated in this tender specifically.

(25). MSSIDC’s Supply Order :

All the terms & conditions of the supply order issued by the Corporation, against rate contract from time to time shall be applicable and binding on the Rate Contract holder , irrespective of the fact that it has not been incorporated in this tender specifically.

(26) DELAYED PAYMENT :

As per the Section 15 of the Micro, Small & Medium Enterprise Development Act, 2006 ―Where any supplier supplies any goods or renders any services to any buyer, the buyer shall make payment therefore on or before the date agreed upon between him and the supplier in writing or where there is no agreement in this behalf, before the appointed day.

Provided that in no case the period agreed upon between the supplier and the buyer in writing shall exceed forty-five days from the date of acceptance or the day of deemed acceptance. As such under no circumstances, the Govt. consignee shall not delay the payment due to MSSIDC beyond 45 days or earlier as agreed to while placing the order.

MSSIDC being a nodal agency nominated by the Govt. of Maharashtra to operate the Rate Contract vide GR dt.02.01.1992, it may please be noted that the indenter / consignee who are the ultimate beneficiary and actual consumer of the stores, shall only be solely responsible for the interest on the delayed payment beyond the stipulated 45 days or earlier as agreed to as referred to above. The consignor unit shall be not raise any interest claim on the Corporation.

(27)Submission of theTender :

The tender is divided in two parts and is required to be submitted online only. The tender submitted through telex / telegram / fax / E-mail / by post / by hand/ by courier / and / or without tender documents will not be accepted .


(28) MSSIDC reserves the right to accept or reject any or all tenders without assigning any reason whatsoever and the decision of MSSIDC in this regard shall be final and binding on all tenderers.

Date : PLACE: Seal & Signature of tenderer


Appendix No.02

ADDRESS, TELEPHONE & FAX NOS. OF MSSIDC HEAD OFFICE & DIVISIONAL OFFICES

OFFICE ADDRESS DiST. COVERED TELPHONEl NOS.

HEAD OFFICE ―Krupanidhi‖,

9, Walchand Hirachand Marg, Ballard Estate,

Mumbai - 400 001

Mumbai

Tel. No. : 022– 22611121/22/23/22615626

Fax No. : 022– 22614939/22614824

PUNE DIVISION Kamala Chambers, 4th

floor, 687, Budhwar Peth,

Near Prabhat Talkies,

Bajirao Road,

Pune - 411 002

Pune, Sangli, Satara, Kolhapur & Solapur

Tel. No. : 020 – 24430482

Fax No. : 020 – 24486860

NASIK DIVISION P-5,MIDC, Satpur,

Near SBI,Trimbak Road,

Nashik 422 007

Nashik,Jalgaon,

Ahemadnagar, Dhule & Nandurbar

Tel. No. : 0253 – 2350151 / 2353085

Fax No. : 0253 – 2350012

AURANGABAD DIVISION

Vikas Bhavan, 3rd

Floor,

Rajendra Prasad Road,

Aurangabad - 431 001

Aurangabad, Beed & Jalana

Tel. No. : 0240 – 2331138 / 2344048

Fax No. : 0240 – 2331035

AMRAVATI DIVISION

Shidore Plots, Camp,

Amravati - 444 602

Amravati, Yavatmal, Akola, Buldhana & Washim

Tel. No. : 0721 – 2662374 / 2665698

Fax No. : 0721 – 2665698

NANDED DIVISION

B – 2, Nanded Co-op. Ind. Estate,College Road,

Nanded - 431 602

Nanded, Parbhani & Hingoli.

Tel. No. : 02462 – 242060

Fax No. : 02462 – 234969

NAGPUR DIVISION

11, Farmland Layout,

Near Shakti Offset, Jail Road, Nagpur.

Nagpur, Gadchiroli, Bhandara, Wardha, Chandrapur & Gondia

Tel. No. : 0712 – 2422484 / 2423544 /45

Fax No. : 0712 – 2423825

LATUR DIVISION Chilkote Bldg., Tilak Nagar, Latur - 413 512

Latur & Usmanabad

Tel. No. : 02382 – 245133

Fax No. : 02382 – 245133

THANE

( KONKAN DIVISION )

1/3, Himgiri Co.Op. Hsg. Society Ltd., Veena Nagar Phase-II, Near Vertex Hospital, Mulund-(West), Mumbai – 400 080

Thane, Navi Mumbai, Ratnagiri, Sindhudurg & Alibag

Tel. No. : 022-21649952 21640983

Fax No. :


Appendix No.03

INFORMATION TO BE FURNISHED BY THE TENDERER FOR CAPABILITY AND CAPCITY ASSESSMENT OF THE TENDERER

(To be enclosed along with technical bid) (Part – I)

(Note : Tenderer must read the enclosed Terms and Conditions before filling up the particulars in this form.) 1. Particulars of Tenderer :

(i) Name of the Manufacturer -----------------------------------------------

(ii) SSI Registration No. and Year of Registration

(with Documentary Evidence) -----------------------------------------------

(iii) Office Address and Tel. No. -----------------------------------------------

-----------------------------------------------

2. * Past Experience – As Annexure - VI

2.1 Total period of experience in manufacturing etc along with the names of the organization. The copy of work order for each year may be enclosed.

2.2 Has the firm ever been debarred/ Yes / No.

Black listed by any organization ? ---------------------------------------------

If ‗Yes‘ the details there of. ---------------------------------------------

2.3 Details of Award/Certificate of ---------------------------------------------

Merit etc. received from any Board/ ---------------------------------------------

University/Organization. (Please ---------------------------------------------

Attach Copy of certificate (s) ---------------------------------------------

2.4 Essential pre-requisite (Infrastructural detail)

a) Physical / Capital :

i. List of machinery available certified by C.A. (Yes / No)

ii. Capacity of the machines installed as (Annexure – VII) (Yes / No)

iii. Space available for storing raw material manufacturing and Area in sq. fts.

finished goods. Open -

Close -

b) Financial :


i) Annual turnover (during last three financial year) - 2011-12 Rs. ..................

enclose copies of balance sheet 2012-13 Rs. ..................

only certified by C.A. 2013-14 Rs. ..................

3. Type of Organization

(Govt. Undertaking, Public Ltd., Pvt.

Ltd., Partnership/Proprietary)

4. Full Name(s) of the Owners / Directors

If Company is Pvt. Ltd.,

Address & Telephone No.

5. If Partnership firm,

(a) Names of the Partners & their addresses __________________________

__________________________

___________________________

__________________________

(b) Whether Partnership Deed is registered __________________________

(enclose copy of deed)

6. Is your firm registered under following Acts? If so, please furnish details :

(a) The Indian Companies Registration No. Date Act, 1956

(b) The Indian Partnership Registration No. Date Act 1932

(c) A Sole proprietary business

(d) Under Society

7. Detailed List of Employees - (As Annexure – VIII)

8. How many Shifts do you normally run?

9. Name & address of your

bankers with bank account number

stating the name in which accounts stands and notify

change, if any , effected.


10. Are you on the list of

approved unit of any other

Govt. / Semi-Govt./Govt.

Recognized Industries ,

Provide certificate for the same.

11. Names of 5 major buyers to

whom unit services were provided

in preceding 5 years.

12. Whether there is any litigation against your Yes / No

firm pending in the Court of Law.

If yes Please give details.

13. Whether your firm is blacklisted

By any public sector , Govt. offices in India.

If so, give details. (Enclose undertaking

As per annexure

14. Whether any part of your property is

pledged/ hypothecated to any financial

Or similar institution. If so, please give details.

15. Any other information which is not

covered in the form, but you consider

necessary to give.

16. DECLARATION : I/We ______________________________________________________________,

Designation __________________, of the (Name of the firm

_____________________________) the undersigned, hereby declare that the above

information is true and correct.


I/We also declare that and confirm all the operation processes/treatment is carried out

our/my own unit.

Date : Address _________________________________ ________________________________________ ________________________________________


Appendix No.04

(To be submitted on Tenderer’s letterhead only)

Self Declaration

I/We

___________________________________________________________________,


__________________________________ ) the undersigned, hereby declare that we

have not awarded any rate contract by DGS&D for the year 2012-2013.

Date : Signature and Seal of the Tenderer Address _________________________________

________________________________________

________________________________________


Appendix No.05

DETAILS OF GROUPWISE SAMPLES TO BE SUBMITTED FOR OFFICE & SCHOOL FURNITURE

Sr. No.

GROUP / ITEM

SAMPLE TO BE SUBMITTED

1 Metal Shelving Racks Open Type (Drawing No. MSSIDC/RCT/MSR/006) 900 x 900 x 375 mm - 3 Shelves 1800 x 900 x 375 mm - 6 Shelves 2100 x 900 x 375 mm - 7 Shelves 2400 x 900 x 375 mm - 8 Shelves 3000 x 900 x 375 mm - 9 Shelves

900x900x375mm – 3 shelves

2

Metal Shelving Racks Closed Type (Drawing No MSSIDC/RCT/MSR/007) 900 x 900 x 375 mm - 3 Shelves 1800 x 900 x 375 mm - 6 Shelves 2100 x 900 x 375 mm - 7 Shelves 2400 x 900 x 375 mm - 8 Shelves 3000 x 900 x 375 mm - 9 Shelves

900x900x375mm – 3 shelves

3

Steel Cupboards with Lockers (Drawing No. MSSIDC/RCT/SL/03) 1980 x 910 x 480 mm - 6 Lockers 1980 x 910 x 480 mm - 8 Lockers 1980 x 910 x 480 mm - 12 Lockers 1980 x 910 x 480 mm - 18 Lockers

1980x910x480mm – 6 Lockers

4

Steel Cupboard (Major) (Drawing No. MSSIDC/RCT/SC/001) Size : 1980 x 915 x 480 mm

Steel Cupboard (Minor) Size : 1270 x 765 x 440 mm Steel Cupboard (Major) with Locker Size : 1980 x 915 x 485 mm (Drawing NoMSSIDC/RCT/SC/002)

Steel Cupboard(Major) With Locker

5 Steel Cupboard Premium Quality (Major) (Drawing No. MSSIDC/RCT/SC/001-A) Size : 1980 x 915 x 480mm

Steel Cupboard Premium Quality (Major)


Sr. No.

GROUP / ITEM


6

Steel Filing Cabinet (Drawing No. MSSIDC/RCT/SF/004) 2 Drawers – Size : 750x470x700 mm 3 Drawers – Size : 1080x470x700 mm 4 Drawers – Size : 1380x470x700 mm

2 Drawers Size 750x470x700mm

7

Steel Tubular Chair(‘K’ TYPE) (Drawing No.MSSIDC/RCT/KTC/012/012-A/012-B Steel Tubular Chair with cane seat, Back with Arms Size 890x500x500 mm

Steel Tubular Chair M.S. Sheet seat, Back with Arms Size 890x500x500 mm

Steel Tubular Chair with Cushion seat, Back with Arms Size 890x500x500 mm

Steel Tubular Chair with cane seat, Back without Arms Size 890 x 500 x 500 mm

Steel Tubular Chair with cane seat, Back with Arms Size 890x500x500 mm

8 Steel Writing Table Size : 900 x 600 x 750 mm (Drawing No. MSSIDC/RCT/SWT/008) Size : 1200 x 600 x 750 mm (Drawing No. MSSIDC/RCT/SWT/009) Size : 1370 x 760 x 750 mm (Drawing No. MSSIDC/RCT/SWT/010)

Size 1370x760x750mm

9 Steel Executive Table Size : 1600 x 865 x 750 mm (Drawing No. MSSIDC/RCT/SET/011)

One

10

Steel Book Case Size : 1675 x 840 x 305 mm (Drawing No. MSSIDC/RCT/SBC/005)

One

11 Steel Bench (Drawing No. MSSIDC/RCT/SB/014) With M.S. Sheet Top Size : 1830 x406 x 450 mm

Steel Bench with Pre-laminated Top


Sr. No.

GROUP / ITEM


With Pre – laminated Top Size : 1830 x 406 x 450 mm

12 Steel Stool (Drawing No. MSSIDC/RCT/SS/013) With M.S. Sheet Top Size : 305 x 305 x 533 mm With Pre – laminated Top Size : 305 x 305 x 533 mm

Steel Stool with Pre-laminated Top

13 Steel Hostel Cot with waterproof commercial plywood top Size : 1910L x 910W x 450H mm (Drawing No. MSSIDC/RCT/SHC/017-A

One

14 Dual Desk (Drawing No.MSSIDC/RCT/DD-15/A/B/C/D) Two Seater M.S. Sheet Top Size : 990 x 914 x 750 mm Three Seater M.S. Sheet Top Size : 1220 x 914 x 750 mm

Dual Desk Three Seater

15 Dual Desk. (Drawing No MSSIDC/RCT/DD-15/A/B/C/D)

Two Seater Pre - laminated Top Size : 990 x 914 x 750 mm Three Seater Pre – laminated Top Size : 1220 x 914 x 750 mm


16 Dual Desk / Teak Wood (Drawing No. MSSIDC/RCT/DD-15/A/B/C/D) Two Seater Teak Wood Top Size : 990x 914 x 750 mm Three Seater Teak Wood Top [

Size : 1220 x 914 x 750 mm


17

Dual Desk (Drawing No. MSSIDC/RCT/DD-15/A/B/C/D) Two Seater Commercial Ply Wood with Sunmica Top Size : 990x 914 x 750 mm Three Seater Commercial Ply Wood with Sunmica Top Size : 1220 x 914 x 750 mm.



Sr. No.

GROUP / ITEM


18

Steel Safe (Drawing No. MSSIDC/RCT/SSF/018) Fire – Resisting & Burglar Resisting (Single Door) a) Size : 470 x 340 x 290 mm b) Size : 580 x 415 x 365 mm c) Size : 850 x 415 x 365 mm d) Size : 1030 x 570 x 440 mm e) Size : 1340 x 570 x 440 mm f) Size : 1860 x 750 x 585 mm

Fire – Resisting & Burglar Resisting (Double Door) a) Size : 1340 x 870 x 440 mm b) Size : 1600 x 960 x 510 mm Non – Fire Resisting & Non - Burglar Resisting (Single Door) a) Size : 520 x 450 x 330 mm b) Size : 640 x 530 x 430 mm

Non – Fire Resisting & Non - Burglar Resisting (Double Door) a) Size : 760 x 600 x 480 mm

Stee Safe – Fire Resisting & Burglar Resisting(Single Door) size : 470x340x290mm

19 Double Decker /Bunker Bed

Size : 1950 x 785 x 1675 mm (Drawing No. MSSIDC/RCT/BB/030)

One

20

Compactor Size : 25mm x 100mm x 35 mm (Draving No. MSSIDC/RCT/Comp/2014-15/001.

One


Appendix No.05

DETAILS OF GROUPWISE SAMPLES TO BE SUBMITTED FOR HOSPITAL FURNITURE

Sr. No.

GROUP / ITEM


1

Bedside Locker Size : 405 x 405 x 750 mm (Drawing No. MSSIDC/RCT/BSL /2012- 021)

One

2 Bedside Screen Open : 2420 mm (L) x 1730 mm (H) Closed : 1200 mm (L) x 1730 mm (H) (Drawing No. MSSIDC/RCT/ST-2012-022)

one

3 Saline Stand Size : 1370 mm to Max. 2435 mm (Drawing No. MSSIDC/RCT/SS-2012-023)

One

4

Foot Step Single - Size : 460 x 230 x 230 mm Double - Size : 460 x 460 x 460 mm (Drawing No. MSSIDC/RCT/FS- 2012-024)

Foot Step

Double : size 460x460x460mm

5

Instrument Cabinet Size : 1525 x 610 x 355 mm (Drawing No. MSSIDC/RCT/IC- 2012-025)

One

6 Revolving Stool Size : 305 x 550 x 800 mm (Drawing No. MSSIDC/RCT/RS-2012-026)

one

7 Stretcher with Trolley Size : 2000 x 565 x 815 mm (Drawing No. MSSIDC/RCT/ST-2012-027)

One

8

Steel Hospital Cot Size : 2090L x 915W x 600H mm Without Mattresses (Drawing No. MSSIDC/RCT/PHC-2012-028)

One

9 Steel Fowler Bed Size : 2090L x 915w x 600 Hmm Without Mattresses (Drawing No. MSSIDC/RCT/FB-2012-032)

One

10 Steel Semi-Fowler Bed Size-2090L X 915W X600H mm Without Mattresses (Drawing No. MSSIDC/RCT/SFB-2012-029)

One

11 Hospital Baby Cot Size : 1321 x 762 x 610 mm (Drawing No. MSSIDC/RCT/BC-2012-031 )

One


Appendix No.06

(To be submitted on manufacture’s letterhead only)

Past performance

Sr. Year Name of the

Organization

Quantity

supplied

Value of

Contract

Details of work

Executed (enclosed

copies of completion

certificates)

1

2

3


Appendix No.07


Detailed List of Machinery installed in the unit

Name of

machinery Make Size

Year of Mfg.

commissioning

Production

Capacity


Appendix No.08


Detailed List of Employees

Name of

Employee Designation

Skilled /

Unskilled Qualification

Works

Experience


Appendix No.09

(On Tenderer’s Letterhead)

UNDERTAKING FROM THE TENDERER We hereby confirm having read and understood all the terms & conditions of the tender under reference and we hereby accept the same unequivocally without any reservation and we shall not alter/add/delete any of the conditions of the tender or part thereof.

We further declare that –

1. We shall make our own arrangement for procurement of requisite raw material. 2. We shall not stipulate our own terms & conditions, and if stipulated, same shall

not form part of this tender. ADDRESS : AUTHORISED SIGNATORY OF TENDERER

1) OFFICE :

PHONE NO.: MOBILE NO. : FAX NO./E.MAIL ADDRESS : 2) FACTORY PHONE NO.: FAX NO/E.MAIL ADDRESS : DATE : SEAL


Appendix No.10

Details of Different Modes of Online Payament to e-Tendering Service Provider. The interested contractors / bidders will have to make online payment (using credit card/debit card/net banking / cash card ) of Rs. 1038.00 (inclusive of all taxes) per bid per tender to online service provider of e-tendering system ( Sify Nex Tenders) at the time of entering online bid submission stage of the tender schedule.

Credit Card 15- IDBI Bank

1- American Express 16- Indian Overseas Bank

2- Diners Club Card 17- IndusInd Bank

3- JCB Card 18- ING Vysya Bank

4- Visa 19- Jammu & Kashmir Bank

20- Karnataka Bank

Debit Card 21- Karur Vysya Bank

1- Canara Bank Debit Card (ATM card) 22- Kotak Mahindra Bank

2- CitiBank Debit Card (IPIN) 23- Laxmi Vilas Bank Net Banking

3- Indian Overseas Bank Debit Card (ATM PIN) 24- Oriental Bank of Commerce

4- Punjab National Bank Debit Card (ATM PIN) 25- Punjab National Bank Corporate

Accounts

5- State Bank of India Debit Card (ATM PIN) 26- Punjab National Bank Retail

Accounts

6- Union Bank of India Debit Card (ATM PIN) 27- Royal Bank of Scotland N.V.

7- Any Indian Bank Issued Visa Debit Card

(Verified by VISA)

28- South Indian Bank

29- Standard Chartered Bank

Net Banking (Direct Debit to Bank Accounts) 30- State Bank of India

1- Andhra Bank 31- State Bank of Mysore

2- Axis Bank 32- State Bank of Travancore

3- Bank of Bahrain & Kuwait 33- Syndicate Bank

4- Bank of Baroda corporate accounts 34- Tamilnad Mercantile Bank

5- Bank of Baroda retail accounts 35- Union Bank of India

6- Bank of India 36- Vijaya Bank

7- Bank of Maharashtra 37- Yes Bank

8- Bank of Rajasthan

9- CitiBank Bank Account Online Cash card

10- City Union Bank 1- Done card

11- Corporation Bank 2- Itz card / noQ 24X7

12- Deutsche Bank

13- Federal Bank Mobile payments

14- HDFC Bank 1- state Bank of India/paymate


Appendix 11

Undertaking from the Tenderer regarding non-blacklisting

(To be submitted on Tenderer’s letterhead only)

Self Declaration

I/We

___________________________________________________________________,


__________________________________ ) the undersigned, hereby declare that

we have not been blacklisted by MSSIDC or any Govt. Department / Semi-Govt.

Departments etc. and if if it is found so, before finalization of rate contract or even

after awarded rate contract, MSSIDC reserves right to dis-qualify us from the

tender / RC.

Date : Signature and Seal of the Tenderer Address _________________________________

________________________________________

________________________________________


Appendix No. A-01

COMMERCIAL BID ( PART- II )

RATE SCHEDULE FOR SUPPLY OF OFFICE FURNITURE, SCHOOL FURNITURE WITH SPRAY PAINT.

SR. NO

ITEM ESTIMATED COST (Rs.)

BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

1

Metal Shelving Racks A) Open Type Ref: Drawing & Specification No.MSSIDC/RCT/MSR / 006

900 x 900 x 375 mm - 3 Shelves

2995/-

1800 x 900 x 375 mm - 6 Shelves 5873/-

2100 x 900 x 375 mm - 7 Shelves 6807/-

2400 x 900 x 375 mm - 8 Shelves 7745/-

3000 x 900 x 375 mm - 9 Shelves 8525/-

2 Metal Shelving Racks B) Closed Type Ref: Drawing & Specification No.MSSIDC/RCT/MSR / 007

900 x 900 x 375 mm - 3 Shelves

3844/-

1800 x 900 x 375 mm - 6 Shelves 7336/-

2100 x 900 x 375 mm - 7 Shelves 8574/-

2400 x 900 x 375 mm - 8 Shelves 9239/-

3000 x 900 x 375 mm - 9 Shelves 10270/-

3

Steel Cupboard with Lockers Ref: Drawing & Specification No. MSSIDC/RCT/SCL / 003

1980 x 910 x 480 - 6 Locker 9320/-

1980 x 910 x 480 - 8 Locker 10743/-

1980 x 910 x 480 - 12 Locker 11228/-

1980 x 910 x 480 - 18 Locker 11556/-

9006/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

4 a)Steel Cupboard (Major) Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001 Size : 1980 x 915 x 485 mm

b)Steel Cupboard (Minor) Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001 Size : 1270 x 765 x 440 mm

5430/-

c)Steel Cupboard (Major) with Locker Ref: Drawing & Specification No. MSSIDC/RCT/SC / 002 Size : 1980 x 915 x 485 mm

9561/-

d)Steel Cupboard Premium Quality(Major) Ref: Drawing & specification No. MSSIDC/RCT/SC/001 Size 1980x915x485mm

11948/-

5 Steel Filing Cabinet Ref: Drawing & Specification No. MSSIDC/RCT/SF / 004 2 Drawers - size 750 x 470 x 700 mm

5594/-

3 Drawers - Size 1080 x 470 x 700 mm 8020/-


6 STEEL TUBULAR CHAIRS( ‘K’type) Ref: Drawing & Specification No. MSSIDC/RCT/KTC / WA / 012/012-A/012-B a) Steel Tubular Chair with cane seat,

Back with Arms Size 890x500x500

1667/-

b) Steel Tubular Chair M.S. Sheet seat, Back with Arms Size 890x500x500

1588/-

c) Steel Tubular Chair with Cushion seat, Back with Cushion Arms Size 890x500x500

2175/-

d) Steel Tubular Chair with cane seat, Back without Arms

Size 890 x 500 x 500

1383/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

7

Steel Writing Table

a) Steel Writing Table NO.I with MDF Board Post Formed Laminate Top Size : 900 x 600 x 750 mm Ref: Drawing & Specification No. MSSIDC/RCT/SWT / 008

3020/-

b) Steel Writing Table No.II with MDF Board. Post Formed Laminate Top Size : 1200 x 600 x 750 mm Ref: Drawing & Specification No. MSSIDC/RCT/SWT / 009

5148/-

c) Steel Writing Table NO.III with MDF Board Post Formed Laminate Top Size : 1370 x 760 x 750 mm Ref: Drawing & Specification No. MSSIDC/RCT/SWT / 010

7962/-/-

8

Steel Executive Table with MDF Board Post Formed Laminate Top Ref: Drawing & Specification No. MSSIDC/RCT/SET /011 Size : 1600 x 865 x 750 mm

11279/-

9

Steel Book Case Ref: Drawing & Specification No. MSSIDC/RCT/SBC /005 Size : 1675 x 840 x 305 mm

6846/-

10

Steel Bench Ref: Drawing & Specification No. MSSIDC/RCT/SB /014 a) With M.S. Sheet Top Size : 1830 x 406 x 450 mm

1936/-

b) With Pre – laminated Top Size : 1830 x 406 x 450 mm

2044/-

11 Steel Stool Ref: Drawing & Specification No. MSSIDC/RCT/SS /013 a) With M.S. Sheet Top Size : 305 x 305 x 533 mm

725/-


647/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

12 Steel Hostel Cot with waterproof commercial plywood Top Ref: Drawing & specification No. MSSIDC/RCT/SHC/017-A Size : 1910L x 910W x 450W mm

6089/-

13

Dual Desk Ref: Drawing & Specification No.MSSIDC/RCT/ DD/ 015/ A/ B/ C/D

Two Seater M.S. Sheet Top Size : 990 x 914 x 750 mm

3716/-

Three Seater M.S. Sheet Top Size : 1220 x 914 x 750 mm

4389/-

14

Dual Desk Ref: Drawing & Specification No.MSSIDC/RCT/ DD/ 015/ A/ B/ C/D Two Seater Pre - laminated Top Size : 990 x 914 x 750 mm

4476/-

Three Seater Pre – laminated Top Size : 1220 x 914 x 750 mm

5172/-

15

Dual Desk / Teak Wood Ref: Drawing & Specification No.MSSIDC/RCT/ DD/ 015/ A/ B/ C/D Two Seater Teak Wood Top Size : 990 x 914 x 750 mm

5479/-

Three Seater Teak Wood Top Size : 1220 x 914 x 750 mm

7308/-

16 Dual Desk Ref: Drawing & Specification No.MSSIDC/RCT/ DD/ 015/ A/ B/ C/D

Two Seater Commercial Ply Wood with Sunmica Top Size : 990 x 914 x 750 mm

4436/-

Three Seater Commercial Ply Wood with Sunmica Top Size : 1220 x 914 x 750 mm

5440/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

17

Steel Safe Fire – Resisting & Burglar Resisting (Single Door) Ref: Drawing & Specification No.MSSIDC/RCT/SSF / 018 a) Size : 470 x 340 x 290 mm

15023/-

b) Size : 580 x 415 x 365 mm 21955/-

c) Size : 850 x 415 x 365 mm 35851/-

d) Size : 1030 x 570 x 440 mm 39662/-

e) Size : 1340 x 570 x 440 mm 66194/-

f) Size : 1860 x 750 x 585 mm 93736/-

Fire – Resisting & Burglar Resisting (Double Door) a) Size : 1340 x 870 x 440 mm

86851/-

b) Size : 1600 x 960 x 510 mm 117679/-

Non – Fire Resisting & Non - Burglar Resisting (Single Door) a) Size : 520 x 450 x 330 mm

15023/-

b) Size : 640 x 530 x 430 mm 23004/-


34036/-

18 Double Decker /Bunker Bed Ref: Drawing & Specification No. MSSIDC/RCT/BB / 030 Size : 1950 x 785 x 1675 mm

12190/-

19 Compactor Ref: Drawing & specification No. MSSIDC/RCT/Compactor92014-15/001 Size : 25mm x 100mm x 35 mm

Seal & Signature of the Tenderer Date:


Appendix No. A-02


RATE SCHEDULE FOR SUPPLY OF OFFICE FURNITURE, SCHOOL FURNITURE WITH POWDER COATING.

SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

1


900 x 900 x 375 mm - 3 Shelves

2995/-

1800 x 900 x 375 mm - 6 Shelves 5873/-

2100 x 900 x 375 mm - 7 Shelves 6807/-

2400 x 900 x 375 mm - 8 Shelves 7745/-

3000 x 900 x 375 mm - 9 Shelves 8525/-


900 x 900 x 375 mm - 3 Shelves

3844/-

1800 x 900 x 375 mm - 6 Shelves 7336/-

2100 x 900 x 375 mm - 7 Shelves 8574/-

2400 x 900 x 375 mm - 8 Shelves 9239/-

3000 x 900 x 375 mm - 9 Shelves 10270/-

3 Steel Cupboard with Lockers Ref: Drawing & Specification No. MSSIDC/RCT/SCL / 003

1980 x 910 x 480 - 6 Locker 9320/-

1980 x 910 x 480 - 8 Locker 10743/-

1980 x 910 x 480 - 12 Locker 11228/-

1980 x 910 x 480 - 18 Locker 11556/-

4

a)Steel Cupboard (Major) Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001 Size : 1980 x 915 x 485 mm

9006/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.) b)Steel Cupboard (Minor)

Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001 Size : 1270 x 765 x 440 mm

5430/-


9561/-


11948/-


5594/-





1667/-


1588/-


2175/-


Size 890 x 500 x 500

1383/-


7

Steel Writing Table

a) Steel Writing Table NO.I with MDF Board Post Formed Laminate Top Size : 900 x 600 x 750 mm Ref: Drawing & Specification No. MSSIDC/RCT/SWT / 008

3020/-


5148/-


7962/-/-

8


11279/-

9


6846/-

10


1936/-


2044/-


725/-


647/-



6089/-

13



3716/-


4389/-

14


4476/-


5172/-

15


5479/-


7308/-



4436/-


5440/-

17


15023/-

b) Size : 580 x 415 x 365 mm 21955/-


c) Size : 850 x 415 x 365 mm 35851/-

d) Size : 1030 x 570 x 440 mm 39662/-

e) Size : 1340 x 570 x 440 mm 66194/-

f) Size : 1860 x 750 x 585 mm 93736/-


86851/-

b) Size : 1600 x 960 x 510 mm 117679/-


15023/-

b) Size : 640 x 530 x 430 mm 23004/-


34036/-


12190/-

19 Steel Office Compactor (Mobile Storage Unit) Ref: Drawing & Specification No. MSSIDC/RCT/COMP/2014-15’001 Size : 2452(L) x 915(W) x 2100mm(H)

Seal & Signature of the Tenderer

Date:


Appendix No. A-02


RATE SCHEDULE FOR SUPPLY OF

HOSPITAL FURNITURE WITH POWDER COATING

SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

1

Bedside Locker Ref: Drawing & Specification No. MSSIDC/RCT/BSL / 2012- 021 Size : 405 x 405 x 750 mm

3332/-

2 Bedside Screen Ref: Drawing & Specification No. MSSIDC/RCT/BSS / 2012- 022 After Open: 2420 mm (L) x 1730 mm (H) After Closed:1200 mm (L) x 1730 mm (H)

12190/-

3 Saline Stand Ref: Drawing & Specification No. MSSIDC/RCT/SS-2012/2012- 023 Size : 1370 mm to Max. 2435 mm

2283/-

4 Foot Step Ref: Drawing & Specification No. MSSIDC/RCT/FS /2012- 024 Single Size : 460 x 230 x 230 mm

1187/-

Double Size : 460 x 460 x 460 mm 1629/-

5 Instrument Cabinet Ref: Drawing & Specification No. MSSIDC/RCT/IC / 2012- 025 Size : 1525 x 610 x 355 mm

10791/-

6 Revolving Stool Ref: Drawing & Specification No. MSSIDC/RCT/RS -2012-026 Size : 305 x 550 x 800 mm

3136/-

7 Stretcher with Trolley Ref: Drawing & Specification No. MSSIDC/RCT/ST-2012-027 Size : 2000 x 565 x 815 mm

19142/-

8 Steel Hospital Cot (without mattress) Ref: Drawing & Specification No.MSSIDC/RCT/PHC-2012-028 Size : 2090L x 915 Wx 600H mm

11370/-

9 Steel Semi-Fowler Bed (Without 15007/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

mattress) Ref: Drawing & Specification No.MSSIDC/RCT/SFB-2012-029 Size : 2090 Lx 915W x 600H mm

10 Steel Fowler Bed (Without mattress) Ref: Drawing & Specification No. MSSIDC/RCT/FB-2012-032 Size : 2090L x 915W x 600H mm

20492/-

11

Hospital Baby Cot (without mattress) Ref: Drawing & Specification Drawing No. MSSIDC/RCT/BC/2012/031 Size : 1220 x 755 x 610mm

9158/-

12 Steel Hospital Cot With Coir Mattresses as per tender specification of size suitable to hospital cot Ref: Drawing & Specification No.MSSIDC/RCT/PHC-2012-028 Cot Size : 2090L x 915 Wx 600H mm

14500/-

13 Steel Semi-fowler bed With Coir Mattresses as per tender specification of size suitable to Semi fowler bed. Ref: Drawing & Specification No.MSSSIDC/RCT/SFB-2012--029 Cot Size : 2090L x 915 Wx 600H mm

18919/-

14 Steel Fowler Bed With Coir Mattresses as per tender specification of size suitable to Fowler Bed Ref: Drawing & Specification No.MSSSIDC/RCT/FB-2012-032 Cot Size : 2090L x 915 Wx 600H mm

25969/-

15 Hospital Baby Cot with mattress as per tender specification of size suitable to Baby Cot. Ref: Drawing & Specification Drawing No. MSSIDC/RCT/BT/2012/031 Size : 1220 x 755 x 610mm

12288/-

Seal & Signature of the Tenderer Date: Place:


Appendix No. A-03


RATE SCHEDULE FOR SUPPLY OF OFFICE FURNITURE, SCHOOL FURNITURE MANUFACTURED ON CNC OPERATED MACHINERY WITH POWDER

COATING. SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

1


900 x 900 x 375 mm - 3 Shelves

2995/-

1800 x 900 x 375 mm - 6 Shelves 5873/-

2100 x 900 x 375 mm - 7 Shelves 6807/-

2400 x 900 x 375 mm - 8 Shelves 7745/-

3000 x 900 x 375 mm - 9 Shelves 8525/-


900 x 900 x 375 mm - 3 Shelves

3844/-

1800 x 900 x 375 mm - 6 Shelves 7336/-

2100 x 900 x 375 mm - 7 Shelves 8574/-

2400 x 900 x 375 mm - 8 Shelves 9239/-

3000 x 900 x 375 mm - 9 Shelves 10270/-

3 Steel Cupboard with Lockers Ref: Drawing & Specification No. MSSIDC/RCT/SCL / 003

1980 x 910 x 480 - 6 Locker 9320/-

1980 x 910 x 480 - 8 Locker 10743/-

1980 x 910 x 480 - 12 Locker 11228/-

1980 x 910 x 480 - 18 Locker 11556/-

4

a)Steel Cupboard (Major) Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001

9006/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

Size : 1980 x 915 x 485 mm b)Steel Cupboard (Minor)

Ref: Drawing & Specification No. MSSIDC/RCT/SC / 001 Size : 1270 x 765 x 440 mm

5430/-


9561/-


11948/-


5594/-





1667/-


1588/-


2175/-


Size 890 x 500 x 500

1383/-

7

Steel Writing Table

a) Steel Writing Table NO.I with MDF Board Post Formed Laminate Top

3020/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

Size : 900 x 600 x 750 mm Ref: Drawing & Specification No. MSSIDC/RCT/SWT / 008


5148/-


7962/-/-

8


11279/-

9


6846/-

10


1936/-


2044/-


725/-


647/-


6089/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

13



3716/-


4389/-

14


4476/-


5172/-

15


5479/-


7308/-



4436/-


5440/-

17


15023/-

b) Size : 580 x 415 x 365 mm 21955/-

c) Size : 850 x 415 x 365 mm 35851/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

d) Size : 1030 x 570 x 440 mm 39662/-

e) Size : 1340 x 570 x 440 mm 66194/-

f) Size : 1860 x 750 x 585 mm 93736/-


86851/-

b) Size : 1600 x 960 x 510 mm 117679/-


15023/-

b) Size : 640 x 530 x 430 mm 23004/-


34036/-


12190/-

Seal & Signature of the Tenderer

Date:


Appendix No. A-03


RATE SCHEDULE FOR SUPPLY OF

HOSPITAL FURNITURE MANUFACTURED ON CNC OPERATED

MACHINERY WITH POWDER COATING

SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

1

Bedside Locker Ref: Drawing & Specification No. MSSIDC/RCT/BSL / 2012- 021 Size : 405 x 405 x 750 mm

3332/-

2 Bedside Screen Ref: Drawing & Specification No. MSSIDC/RCT/BSS / 2012- 022 After Open: 2420 mm (L) x 1730 mm (H) After Closed:1200 mm (L) x 1730 mm (H)

12190/-

3 Saline Stand Ref: Drawing & Specification No. MSSIDC/RCT/SS-2012/2012- 023 Size : 1370 mm to Max. 2435 mm

2283/-

4 Foot Step Ref: Drawing & Specification No. MSSIDC/RCT/FS /2012- 024 Single Size : 460 x 230 x 230 mm

1187/-

Double Size : 460 x 460 x 460 mm 1629/-

5 Instrument Cabinet Ref: Drawing & Specification No. MSSIDC/RCT/IC / 2012- 025 Size : 1525 x 610 x 355 mm

10791/-

6 Revolving Stool Ref: Drawing & Specification No. MSSIDC/RCT/RS -2012-026 Size : 305 x 550 x 800 mm

3136/-

7 Stretcher with Trolley Ref: Drawing & Specification No. MSSIDC/RCT/ST-2012-027 Size : 2000 x 565 x 815 mm

19142/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

8 Steel Hospital Cot (without mattress) Ref: Drawing & Specification No.MSSIDC/RCT/PHC-2012-028 Size : 2090L x 915 Wx 600H mm

11370/-

9 Steel Semi-Fowler Bed (Without mattress) Ref: Drawing & Specification No.MSSIDC/RCT/SFB-2012-029 Size : 2090 Lx 915W x 600H mm

15007/-

10 Steel Fowler Bed (Without mattress) Ref: Drawing & Specification No. MSSIDC/RCT/FB-2012-032 Size : 2090L x 915W x 600H mm

20492/-

11

Hospital Baby Cot (without mattress) Ref: Drawing & Specification Drawing No. MSSIDC/RCT/BC/2012/031 Size : 1220 x 755 x 610mm

9158/-

12 Steel Hospital Cot With Coir Mattresses as per tender specification of size suitable to hospital cot Ref: Drawing & Specification No.MSSIDC/RCT/PHC-2012-028 Cot Size : 2090L x 915 Wx 600H mm

14500/-

13 Steel Semi-fowler bed With Coir Mattresses as per tender specification of size suitable to Semi fowler bed. Ref: Drawing & Specification No.MSSSIDC/RCT/SFB-2012--029 Cot Size : 2090L x 915 Wx 600H mm

18919/-

14 Steel Fowler Bed With Coir Mattresses as per tender specification of size suitable to Fowler Bed Ref: Drawing & Specification No.MSSSIDC/RCT/FB-2012-032 Cot Size : 2090L x 915 Wx 600H mm

25969/-


SR. NO


BASIC PRICE (Rs.)

VAT

(Rs.)

TOTAL

(Rs.)

15 Hospital Baby Cot with mattress as per tender specification of size suitable to Baby Cot. Ref: Drawing & Specification Drawing No. MSSIDC/RCT/BT/2012/031 Size : 1220 x 755 x 610mm

12288/-

Seal & Signature of the Tenderer Date:

Place:

“krupanidhi”, 9, walchand hirachand marg, ballard estate...

Documents