annual report of air pollution and stone conservation laboratory
TRANSCRIPT
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
1/84
ANNUAL REPORT OF AIR POLLUTION ANDSTONE CONSERVATION LABORATORY
2010Published by
Dy. Superintending Archaeological Chemist
Archaeological Survey of India
Air Pollution & Stone Conservation Laboratory
Agra Fort, Agra
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
2/84
Principal Contributor
&Chief Editor
P.C. GuptaDy. Superintending Archaeological Chemist
Air Pollution Monitoring Team
D. Benerjee, ASAC
Abhilasha Singh, AAC
Ravindra Pachar, AAC
Stone Conservation Research Team
B.P. Nauni, ASAC
Akhilesh Bhadoriya, AAC
Edited By
Rohit Misra, AAC
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
3/84
FOREWORD
Present-day Agras fame rests entirely upon the presence of the Taj Mahal.
However, the city is also home to a rich collection of lesser-known and seldom-
visited Mughal monuments, many of which are situated on the Yamuna riverfront
within a relatively short distance of each other.
Deterioration of the cultural heritage as a result of pollution and other similar
factors is still a real and topical issue. Though for Taj Mahal, Archeological Survey of
India has established specific strategies and action plans for regular monitoring and
long-term follow-up of conservation methods. For that, Ambient Air Quality
Monitoring Station was established at Taj Mahal in 1981 for the monitoring and
analysis of pollutants in the ambience air of Taj by Archeological Survey of India.
But, round the clock monitoring of air pollutants and meteorological parameters
throughout the year has been started since December 2000 as per the order of
Honorable Supreme Court.
This report presents air pollution data monitored during the year 2010. In the
compilation of this report, the annual average values for the earlier years have also
been incorporated with a view to enable the reader to have a full picture of the
environmental scenario in the ambience of Taj Mahal.
Place: Agra
Date: P. C. Gupta
Dy. Superintending Archaeological Chemist
Archaeological Survey of India
Air Pollution & Stone Conservation Laboratories
Agra Fort, Agra
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
4/84
Contents
Section A:AIR QUALITY MONITORING WORK
1. Introduction 1
1.1. Cultural Heritage 1
1.2. Pollution threats on Heritage Properties 1
1.3. Taj Mahal and Its Conservation 4
2. Meteorology 72.1. Meteorological parameters 7
2.2. Wind Speed 9
2.3. Wind Direction 10
2.4. Relative Humidity 20
2.5. Temperature 23
2.6. Rain Fall 26
3. Deposition of Particulate 27
3.1. Dust pollution 29
3.1.1. Dispersion Mechanism and Effect 29
3.1.2. Dust Fall Measurement 30
3.1.3. Dust Fall pollution 30
3.2. Suspended Particulate Matter 40
3.2.1. SPM at Taj mahal 41
4. Gaseous Pollutants 44
4.1. Oxides of Sulphure 45
4.2. Oxides of Nitrogen 48
5. Sulphation Rate at Taj mahal & Sikandra 51
6. Current Scenario of Air Pollution at Taj Mahal 54
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
5/84
Section B: STONE CONSERVATION RESEARCH WORK
1. Introduction 56
1.1. Setting Up of Stone Conservation Laboratory 57
2. Research Work 58
2.1. Petrographic Studies 58
2.1.1. Samples 58
2.1.2. Preparation of thin sections 59
2.1.3. Petrographic description 59
2.1.3.1. Inlayed Stones of Taj Mahal 59
2.1.3.2. Stone Sample of Sun Temple, Konark 62
3. Comprehensive Scientific Investigations on Itmad-Ud-Daulah 63
3.1. Photo-documentation 63
3.2. Weathering Problems 68
3.3. Material Used 72
3.4. Sample Collection 72
3.5. Stereomicroscopic Studies 74
3.6. TDS/Conductivity Measurement 77
3.7. Insoluble Inorganic matter 77
4. Present Status of Work 78
Other Activities of Air Pollution and Stone Conservation laboratory 78
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
6/84
1
1. Introduction
1.1 Cultural Heritage
Culture is the evolution of human life in space and time. The monuments
remnants of the human creation of all the times form the prints, the signs, the
evidences, the strides of the human-beings progress within the time. Cultural values
created by our ancestors, and represent every sphere of their activities, including:
political, economic, cultural, industrial as well as their daily life. Cultural properties are
an indispensable part of our world; from them we obtain information about the history,
culture, ideas and technologies that we use as a basis for considering our present and
future, our society and culture. Thus, monuments form an undivided entirety with time
and place, with man, his surroundings and his history. These unique and
unprecedented fingerprints of human civilization form the natural and cultural heritage of
a place, of a country, of a people, the peculiar features of a nation which characterize its
identity.
The term heritagewas used for first time from experts in the early seventies, to
declare all the human creation with artistic features, which have been delivered to us as
hereditary asset, namely as heritage. In India we have a vast continuity of our cultural
heritage. It ranges from wonderful monuments to manuscripts, sculptures, paintings,
wood carvings etc.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
7/84
2
1.2 Pollution threats on Heritage Properties
Cultural heritage is continuously undergoing numerical strains: anthropogenic
and natural ones, from which the former can be anticipated, or prevented, whereas the
latter not. The result of these strains is the deteriorationof all the materials. In fact, there
is no material which is not to be downgraded.
Of the many types of cultural properties, the tangible cultural properties -
buildings, handicrafts, paintings, statues, ancient documents, antiquities, materials of
folk history and so on - are made of a variety of materials including metal, stone, wood,
textiles, paper and leather, or a combination of these materials. With the passage of
time and the effect of external factors such as the formation of mold, insect attack,
changes in temperature and humidity, ultraviolet rays and so on, materials will
deteriorate, gradually causing irreparable damages to the relic. This type of natural
deterioration of cultural properties can be prevented using traditional repair techniques
and through the application of chemical preservatives such as synthetic resins.
Therefore, cultural properties can be restored and protected in most circumstances.
However, in recent years the deterioration of cultural properties caused by
different forms of atmospheric pollution has become a serious problem. Various
atmospheric pollutants cause the corrosion, fading, discoloring or deterioration of the
materials from which these cultural properties are made. Atmospheric pollution
penetrates into many places and has an adverse affect on many types of cultural
properties. Now, more than ever, these cultural properties are in danger of destruction.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
8/84
3
Pollution of the natural environment is largely unintended and unwanted
consequences of human activities in manufacturing, transportation, agriculture and
waste disposal. High levels of pollution are largely a consequence of industrialization,
urbanization and the rapid increase of human population in modern times. Pollutants
are commonly classified according to the part of the environment primarily effected by
them, either by air, water or land. Sub-grouping depends on characteristics of the
pollutants themselves: chemical, physical, thermal and others. Many pollutants affect
more than one resource. The substances that pollute the atmosphere are either gases,
finely divided soils, or finely dispersed liquids aerosols. Five major classes of pollutants
are discharged into the air: carbon monoxide, sulphur oxides, hydrocarbons, nitrogen
oxides and particulates (dust, ash). Air pollution as an anthropogenic reason for
materials deterioration forms a problem of a great importance, because it has
catastrophic consequences, universally, in health, in the environment and in the cultural
heritage monuments and artifacts.
The resistance of stone to the weathering agents, natural or artificial is not linear
and the stone once depleted becomes much more prone to the action of pollutants. The
weathering behavior further becomes more complex in case of deposition of air borne
particulate contaminated with acidic gases and traces of heavy metals. The deposited
particulate matter which is not only aesthetically detractive but also hides decay, aging
forms a hard crust on stone surface, the carved surface and the niches that provide
better sink to the particulate and do not receive direct rain lashes are indicative of the
problem due to high levels of S.P.M. In such cases it is essential to carry out active
conservation measures by way of removing the accretion deposits and improving the
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
9/84
4
surface resistance to the weathering action either by action of some polymeric coat or
by improving the surface characteristics. The active conservation measures using the
appropriate method, developed and evaluated in the laboratory, have yielded very
encouraging results in case of the Taj mausoleum.
The principle source of air pollution is the burning of fossil fuels, e.g., coal, oil and
derivatives of the latter, such as gasoline, in internal combustion engines or for heating
or industrial purposes. Once released into the atmosphere organic and inorganic
pollutants undergo a variety of complex interaction determined by physical and chemical
processes. Again, photochemical processes also play a role on organic and inorganic
pollutants. In these phenomena the atmospheric chemistry of a region and air quality
trends do not show a uniform trend due to the obvious role of complex photochemical
reactions coupled with related chemical reactions.
1.3 Taj Mahal and Its Conservation
There has been a long tradition in and awareness of the importance of cultural
heritage, especially immovable heritage, at the national level, in particular related to the
protection and restoration of architectural heritage like Taj Mahal. Indeed for many
centuries, there has been awareness of the importance of preserving built heritage, but
this idea of restoration really crystallized in the 19th century, these ideas being put into
practice.
Atmospheric pollutants and its relationship with heritage conservation are one of
the most important issues which concern us today. Asian countries possess the largest
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
10/84
5
legacy of monuments and thus have a great potential for conservation measures as well
as heritage and culture issues. To further this concern technologist and archaeologist
the world over are interested in the healthy keep up monuments.
The Taj Mahal is a world heritage site, located in a predominantly agricultural
landscape, dotted with small lime kilns burning high-sulfur coals, and in an environment
conducive to frequent heavy dewfall. The construction is almost entirely of marble and
other decorative stones. The prospect of pollution-related damage to the Taj Mahal is of
considerable social and economic concern, and has generated a number of programs to
document pollution-related decay and to identify specific cause of observed damage.
Agra (2710N, 7805E) is located in north central India 200 km southeast of
Delhi. Two-thirds of its peripheral boundaries (SE, W and NW) are bounded by the
Rajasthan desert. The soil type is a mixture of sand and loam, containing excess of
salts. The city is about 169 m above the MSL and has semi-arid climate with
atmospheric temperature ranging between 11 to 48C (max.) and 0.7 to 30C (min.),
relative humidity between 25 95%, and average rainfall of about 650 mm per year. The
climate of Agra has been broadly divided into three seasons: winter (November to
February), summer (March to June) and monsoon (July to October). The prevailing
directions follow two distinct patterns: during monsoon winds are from W, NW, SW and
NE Sector, while during the rest of the seasons they are from W and NW sector.
The 10,400 sq km region covered under the TTZ has been categorized as a
sensitive zone because of the existence of many world Heritage Sites. Some important
urban centers, which come under the Taj Trapezium Zone, include Agra, Firozabad,
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
11/84
6
Mathura, Bharatpur, Jalesar and Hathras. These are the primary growth centers of the
region. They influence not only the regional economy but also the environment. The
region is most fertile in the country. Besides the Taj Mahal, the TTZ includes two other
world heritage monuments the Agra Fort and Fatehpur Sikri. About two million
tourists visit Agra every year, making it a major source of revenue and foreign exchange
for the region. However, continuously rising environmental pollution has been the cause
of concern for the protection of Taj marble.
Over last few decades, the damage caused to the Taj Mahal by the pollution
created by various industrial, commercial and residential activities surrounding it has
been prompting the government of India, courts, activist groups and various donor
agencies to raise awareness about the threat and to develop programs to protect the
monument. In 1979, the Government of India (GOI) constituted a High Power
Committee (HPC) to protect the Taj Mahal monument from chemical corrosion and
degradation. Thereafter, no polluting industry was allowed to establish or expand in
Agra. Subsequently, there had been many environmental interventions. They include
installation of air pollution control units by 173 industries (out of 265) by 1994 and some
others especially between 1996 and 2000 have resulted in overall improvement in
environmental quality of Agra city during that period.
The Ambient Air Quality Monitoring Station was established at Taj Mahal in 1981
for the monitoring and analysis of pollutants in the ambience air of Taj by Archeological
Survey of India. But, round the clock monitoring of air pollutants and meteorological
parameters throughout the year has been started since December 2000 as per the
order of Honorable Supreme Court.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
12/84
7
2. Meteorology
The beginnings of meteorology can be traced back to ancient India, as the
Upanishads contain serious discussion about the processes of cloud formation and rain
and the seasonal cycles caused by the movement of Earth around the sun.
Varahamihiras classical work Brihatsamhita, written about 500 A.D., provides clear
evidence that a deep knowledge of atmospheric processes existed even in those times.
The atmospheric conditions determine the behavior of pollutants after they leave
the source or sources until they reach receptors, Such as people, animals, plants and
buildings. Therefore, knowledge of meteorological and characteristics of a study area
are of utmost importance. Transport and diffusion of the pollutants to atmosphere is
governed by Meteorological factors. Meteorology study may be classified under macro
and micro meteorological heads. Micrometeorology meaning study of minute variations
in atmospheric conditions confined to an area of a few square kilometers and up to an
elevation of 500 to 1000 meters in the atmosphere governs the transmission and
diffusion of air pollutants.
2.1 Meteorological Parameters
These have been grouped under two heads viz the primary and the secondary.
Amongst the primary meteorological parameters are wind speed, wind direction and
atmospheric stability. The secondary factors include ambient temperature, humidity,
precipitation, solar radiation, pressure and visibility. The primary factors are responsible
for the dispersion and dilution, whereas secondary factors first affect the primary
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
13/84
8
parameters thus altering transmission of air pollutants. This grouping of primary and
secondary parameters will also depend on particulate study and/or site. For example for
site affected by smog, solar radiation may be taken as primary parameter.
The wind direction is another important factor as the affect of emissions at a
particular area is dependent upon the direction of wind from the source. Even in our
most polluted cities where there are heavy industries, there are frequent periods when
the atmospheric air is quite clear and transparent. These frequent fluctuations are not
caused by gross changes in the emission of local pollutants but rather are a function of
variation in the meteorological conditions.
A numerical scale for the estimation of wind force/speed and its effect on
common object is given below
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
14/84
9
2.2 Wind Speed
This is very important determines the rates of dilution and transport of air
pollutants. The travel time is important in that, it determines the amount of time; the
pollution is exposed to the above meteorological factors before coming into contact with
receptors.
The second effect of wind speed is on dilution of the pollutant in the down wind
direction. The dilution of air pollutants released from a source is directly proportional to
wind speed or the down wind concentration of air pollutants is inversely proportional to
wind speed.
Wind speed is affected by a number of factors and situations, operating on
varying scales (from micro to macro scales). These include the pressure gradient,
Rossby waves and jet streams, and local weather conditions. There are also links to be
found between wind speed and wind direction, notably with the pressure gradient and
surfaces over which the air is found.
The wind speed in the ambience of Taj is being measured with wind monitor
WM-271 on hourly basis. The wind rose diagram obtained from wind monitor provides
information about monthly average wind speed (in wind speed ranges of 1.6 Km/h, 5.0
Km/h, 12.0 Km/h, 20.0 Km/h, 29.0 Km/h & above 29.0 Km/h)
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
15/84
10
2.3 Wind Direction
The wind direction will have an important influence on the expected weather. You
can often be given a wind direction and you will have a pretty good idea of how the
weather will change and what weather can be expected with that wind direction.
The typical wind direction that a location has for a certain time of the year is
called the prevailing wind. When the wind is from the prevailing direction then the
weather is generally typical. When the wind shifts away from the prevailing direction
then it often indicates atypical or changing weather.
The wind direction in the ambience of Taj is being measured with wind monitor
WM-271 on hourly basis. The wind rose diagram obtained from wind monitor provides
information about percent wind direction (in 16 components as E, EN-E, N-E, NN-E, N,
NN-W, N-W, WN-W, W, WS-W, S-W, SS-W, S, SS-E, S-E, ES-S). Turbulence and flow
of wind primarily govern the dispersion of pollutants emitted from the source.
The data related to all the 16 components of wind direction have been compiled
in Table 2.1 & 2.2 and their graphical representation is given in wind rose diagrams.
During the year 2010 the wind rose diagram has been drawn in respect of wind speed
and wind direction through the wind monitor WM 271.
During the year 2010, the wind predominantly blew from North west, West north-
west, West & West south-west directions to South east, East south-east, East & East
north-east directions respectively.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
16/84
11
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
17/84
12
Table 2.1: Wind Direction (Percent Average Component) For the Year 2010
WindDirection/
MonthE EN-E N-E NN-E N NN-W N-W WN-W
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
4.17
4.35
5.80
1.94
6.89
4.89
19.4
14.3
9.17
9.23
3.88
0.68
2.78
3.11
3.72
1.79
3.03
4.17
6.02
4.72
3.49
2.86
1.87
1.37
5.98
3.42
2.90
2.69
5.79
4.17
6.02
4.72
2.76
4.61
1.43
3.44
4.03
2.64
0.96
1.64
3.72
4.02
4.93
1.11
5.53
1.75
1.58
1.37
1.66
1.71
1.51
2.24
3.31
3.45
1.91
0.69
4.07
1.27
1.43
2.06
3.19
3.26
4.55
1.64
7.03
7.19
2.32
0.97
6.40
4.14
4.31
5.24
6.67
9.79
9.25
5.23
6.48
6.47
2.32
0.97
4.36
8.43
4.02
6.48
6.25
6.37
7.87
14.0
6.20
10.2
1.23
1.52
7.27
10.1
5.46
7.44
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
18/84
13
Table 2.2: WIND DIRECTION (PERCENT AVERAGE COMPONENT) FOR THE YEAR2010
WindDirection/
MonthW WS-W S-W SS-W S SS-E S-E ES-E Calm
Air
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
6.25
14.1
17.8
19.9
8.13
14.9
3.01
3.05
6.40
6.68
13.2
11.3
4.45
6.53
8.01
18.2
5.51
11.9
4.10
6.25
9.60
4.93
6.90
6.89
0.55
2.64
1.65
6.88
0.41
3.02
0.13
2.08
3.49
0.79
1.58
1.51
0.0
0.0
0.0
0.0
0.0
0.14
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.29
0.0
0.0
0.13
0.13
0.0
0.0
0.0
0.13
0.27
0.31
0.0
0.0
0.0
0.28
0.54
0.13
0.0
0.0
0.0
0.0
0.0
0.31
0.0
0.14
1.37
0.43
0.82
0.97
0.0
0.0
0.0
0.0
0.55
2.48
1.38
0.89
13.9
2.87
14.7
12.7
4.22
5.09
1.15
0.41
53.12
38.88
34.60
22.15
28.13
21.58
32.19
45.55
33.18
39.96
53.09
51.58
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
19/84
14
Monthly Wind-rose Diagram For the year 2010
January 2010
February 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
20/84
15
March 2010
April 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
21/84
16
May 2010
June 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
22/84
17
July 2010
August 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
23/84
18
September 2010
October 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
24/84
19
November 2010
December 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
25/84
20
2.4 Relative humidity
The measurement of humidity is of secondary importance in most air pollution
studies. The hygrometric state of the atmosphere in terms of relative humidity is
expressed as the ratio of the amount of water vapor present in the atmosphere to the
amount of water required to saturate it at that temperature. The values are usually given
as percent.
The relative humidity in the immediate environment of the stone plays an
important role in influencing the weathering action of various pollutants. The role of
humidity are in aggravating, the rusting of iron dowels, leaching of cementing material
and even allowing the action of SO2 through dry deposition. Though the porosity of the
stone and the binding matrix are significant parameters which are responsible for
weathering of stone, the ingress of water through cracks and crevices in case of stone
having least porosity may cause more danger than stone having high porosity. In this
context, the studies reported earlier show that humidity determination on various litho
types have shown that in marble which has a very low porosity, humidity rapidly diffuses
in the whole material. Sand stone having much high porosity than marble absorbs
greater amount of water which however diffuses more slowly within the stone.
Relative humidity has been recorded with wind monitor WM-271 on hourly basis.
The data of relative humidity recorded in the ambience of Taj Mahal have been
compiled in Table 2.3 & Figure 2.1.
The maximum relative humidity was recorded as 100.0 % in the month of
September & December. The minimum relative humidity was recorded as 5.0% in the
month of April. The Maximum variation in relative humidity in a day was recorded as
65.3% in the month of January & December. The Maximum monthly average variation
in relative humidity was recorded as 46.0% in the month of February.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
26/84
21
Table 2.3: Relative Humidity at Taj Mahal for the year 2010
Month Relative Humidity (%)Max. Min. Variation
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
99.5
95.4
81.2
56.0
91.0
78.5
99.0
98.2
100
95.5
99.0
100
30.2
20.1
8.0
5.0
14.3
17.2
39.1
44.0
34.1
27.0
32.1
28.1
69.3
75.3
73.2
51
76.7
61.3
59.9
54.2
65.9
68.5
66.9
71.9
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
27/84
22
Figure 2.1: % Relative Humidity at Taj Mahal for the year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
28/84
23
2.5 Temperature
The maximum temperature in air pollution studies may be used to estimate the
maximum mixing depth for the day if a temperature profile is available. In addition, the
daily range of temperature may be used to calculate heating degree day values. The
wide temperature fluctuations causing thermal movement in the building materials
results in the decay process when experienced over longer periods. The temperature
inversion retards the diffusion rate of air pollutants which ultimately results in direct or
indirect interaction between building materials and air pollutants.
Temperature has been recorded with wind monitor WM-271 on hourly basis. The
data of atmospheric temperature recorded in the ambience of Taj Mahal has been
compiled in Table 2.4 & Figure 2.2. The Maximum temperature was recorded as 45.40C
in the month of May while minimum temperature was recorded as 6.20C in the month of
January. The maximum variation in temperature in a day was recorded as 17.3 0C in the
month of January. The maximum monthly average variation in temperature was
recorded as 13.6 0C for the month of March.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
29/84
24
Table 2.4: Temprature at Taj Mahal for the year 2010
Month Temperature (0C)Max. Min. Variation
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
28.3
31.4
40.1
43.3
45.4
43.6
39.1
38.4
35.3
35.6
31.6
25.6
6.2
12.0
16.2
23.0
22.2
24.0
24.2
24.3
22.2
18.6
15.0
9.0
22.1
19.4
23.9
20.3
23.2
19.6
14.9
14.1
13.1
17
16.6
16.6
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
30/84
25
Figure 2.2: Temperature at Taj Mahal for the year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
31/84
26
2.6 Rain Fall
Rain is liquid precipitation, as opposed to non-liquid kinds of precipitation such as
snow, hail and sleet. In meteorology, rainfall typescan include the character or phase of
the precipitation which is falling to ground level. There are three distinct ways that rain
can occur. These methods include convective, stratiform, and orographic rainfall.
Convective precipitation is generally more intense, and of shorter duration, than
stratiform precipitation. Precipitation can also fall in two phases, either liquid or solid.
Liquid forms of precipitation include rain and drizzle. Rain or drizzle which freezes on
contact within a subfreezing air mass gains the preceding word of freezing, becoming
known as freezing rain or freezing drizzle. Frozen forms of precipitation include snow,
ice needles, sleet, hail, and graupel. Precipitation intensity is determined either by rate
of fall, or by visibility restriction.
Rain fall is also measured with WM-271 on hourly basis. The intensity of rain
largely influences the impact of acidic pollutants on calcareous stone. In case of stone
which is exposed and regularly washed by rains, the accretion deposits along with the
resultant products may be washed away.
The maximum Rain fall was recorded as 247.00 mm in the month of September,
where as the minimum rain fall was recorded as 4.00 mm in the month of January. It
was also noticed that there was no rain during the month of March, April, October &
December. The total rain fall during this year was recorded as 669.90 mm.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
32/84
27
3. Deposition of Particulates
Particulate matter (PM) is the term used for a mixture of solid particles and liquid
droplets suspended in the air. These particles originate from a variety of sources, such
as power plants, industrial processes, and diesel trucks, and they are formed in the
atmosphere by transformation of gaseous emissions. Their chemical and physical
compositions are depending on location, time of year, and weather. Particulate matter
is composed of both coarse and fine particles. Dispersion of particulates emitted
from a stack differs from that of pollutant gases that settle toward the earths surface,
they are not re-entrained in the atmosphere by the wind. Particles may also be removed
by wash out and rain out and impaction on surface of trees, structures and other objects
in contact with the air. The time of removal varies with particle size, height above the
surface and the meteorological factors that transport the particles. Some particles are
airborne only a very short time, (measured in seconds) while others remain airborne for
long periods (upto years), such as the very small fall out ash injected into the
stratosphere by nuclear explosions or the small dusts from the eruption of volcanoes.
Impaction is quite important in the removal of small particles from the
atmosphere, especially those particles small enough to prevent effective settling. These
particles are also resistant to wash out. The velocity needed for impaction is given to the
particles by air currents and for very small particles (0.2 m) by Brownian motion. The
efficiency of removal depends upon the diameter of the particle, the characteristic length
(diameter) of the impaction surface, and the relative velocity between the particle and
the surface. The most effective impaction occurs when an aerosol is blown through tree
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
33/84
28
leaves and grass or weeds. Impactive removal of particles from the air causes the
vertical and even the overhead surfaces of structures to become dirty.
Particulate matter (dust) comes in great varieties of size, grain loading, shape,
chemical composition, specific gravity, bulk density, friability, stickiness, resistivity,
wettability, cohesiveness etc. Inview of these variables, different types of particulates
have different meanings and the most common among them may be classified as
follows:-
Grit: Solid particles suspended in air with a diameter over 500 m.
Dust: Solid particles suspended in air with a diameter between 0.25 m- 500 m.
Smoke: Gas-borne solids with particles usually less than 2 m in diameter.
Fumes: Suspended solids in air less than 1.0 m in diameter normally released from
chemical or metallurgical processes.
Mist: Liquid droplets suspended in air with a diameter of less than 2.0 m.
Aerosols: Aerosols refer to solid or liquid particles of microscopic size (smoke, fog or
mist). Broadly speaking Aerosols fall into four classifications: 1) Sprays; 2) Mists; 3)
Dust; 4) Fumes. Liquid droplets suspended in air, greater than 10 m in size are defined
as sprays, those less than 10 m as mists. Similarly submicron solid particles
suspended in air are referred to as fumes and those greater than 1 m as dusts.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
34/84
29
3.1 Dust Pollution
The Dust consists of particles in the atmosphere that arise from various sources
such as soil dust lifted up by wind (an Aeolian process), volcanic eruptions, and
pollution. Dust in homes, offices, and other human environments contains small
amounts of plant pollen, human and animal hairs, textile fibers, paper fibers, minerals
from outdoor soil, human skin cells, the remains of burnt meteors and many other
materials which may be found in the local environment.
3.1.1 Dispersion Mechanism and Effect
The dust pollution may be due to natural blowing winds or emission from industries or
other sources.
The soil is easily picked up by the strong preventing winds. The coarser material is
drifted along close to ground to be piled along fences, hedges, buildings and other
obstacles. The finer dust being swept in to the air gives rise to blinding destructive dust
storms. Blown sand acts as a powerful abrasive agent. The effect on rock surface is far
greater if it is continuously exposed to natural sand blasting for a long period of time.
Large solid particles with a diameter of over 50 m are collectively visible in the air and
settle out fairly quickly so that they are not a long term pollution hazard. The grit and
dust of the kind collected in gauges used for the measurement of deposited on the
ground, on the roofs, window sills and other ledges of buildings and on other structures
mostly within a few kilometers of the points of discharge into the air. The larger sizes
over 10 m diameter fall near the sources of emission and the smaller particles are
carried further before being deposited. Consequently, stone work and clay quarries,
cement works, brick works often cause despoliation of the surrounding land. Dust fall
particles because of their large size are offensive to the visual sense and constitute a
nuisance.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
35/84
30
The abrasion due to soil particles depends on the size of the dust. The particles
moving with blowing winds when strike with the stone surface, their kinetic energychanges to potential energy and that potential energy and that potential energy grooves
the surface at striking point on continuous hammering.
The grit, dust and smoke in thickly populated industrial areas are heavily
contaminated with sticky soot and tarry matter. Such particles are often damp or wet
with atmospheric moisture or rain; they readily stick to surfaces with which they come
into contact and not easily removed. In addition, the particulate matter when moist or
wet absorbs SO2 from the contaminated air and the oxide is converted to sulphurous
and sulphuric acids. The affect of these acids is of chemical nature.
3.1.2 Dust Fall Measurement
The dust fall rate is measured by using standard recommended apparatus
(Dust Fall Jar) by gravimetrically in the nearby atmosphere of Taj Mahal, Agra Fort and
Sikandra on monthly basis. The values recorded for dust fall rate along with its pH,insoluble inorganic, organic and water soluble components.
3.1.3 Dust Fall Pollution
Dust fall rate was measured at Taj Mahal , Agra Fort and Sikandra and the data
obtained have been compiled in Table 3.1, 3.2, 3.3 & 3.4 Figure 3.1 ,3.2, 3.3, 3.4 & 3.5.
The maximum value of Dust fall rate at Taj Mahal, Agra Fort and Sikandra were
measured as 12.19 MT/Km2 /month in the month of June, 14.36 MT/Km2 /month in the
month of December, 9.08 MT/Km2 /month in the month of November respectively. The
minimum value of Dust fall rate at Taj Mahal, Agra Fort and Sikandra were measured as
2.99 MT/Km2 /month in the month of December, 2.14 MT/Km2 /month in the month of
August, 3.25 MT/Km2/month in the month of December respectively.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
36/84
31
Table 3.1: Dust Fall rate (MT/Km2/Month) at Taj Mahal , Agra Fort & Sikandra forthe year 2010
Month Taj Mahal Agra Fort Sikandra
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
7.68
5.79
7.16
6.24
11.65
12.19
8.78
5.26
6.41
5.66
8.97
2.99
6.31
5.72
6.50
6.49
8.50
10.33
5.52
2.14
2.24
4.52
7.59
14.36
3.38
3.50
6.56
6.03
6.52
6.74
6.31
6.05
3.61
7.40
9.08
3.25
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
37/84
32
Figure 3.1: Dust Fall Rate (MT/Km2/Month) at Taj Mahal, Agra Fort & Sikandra for
the year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
38/84
33
Table 3.2: Dust fall rate and its components at Taj Mahal for the year 2010
Month pH TotalInsolubleMatter (%)
VolatileMatter
(%)
WaterSolubleDust (%)
InsolubleInorganicMatter (%)
TotalInorganicMatter (%)
Dust Fall Rate(MT/Km
2/month)
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
7.0
7.0
6.2
7.7
6.9
7.5
7.5
6.9
7.0
7.2
7.5
7.7
8.47
18.70
9.0
22.10
23.11
16.11
15.58
24.65
9.57
17.28
12.45
31.27
6.41
18.05
7.74
20.41
21.50
14.05
14.23
23.90
7.71
16.08
10.95
28.52
91.53
81.30
91.00
77.90
76.89
83.89
84.42
75.35
90.43
82.72
87.55
68.73
2.06
0.65
1.26
1.69
1.60
2.06
1.35
0.75
2.46
1.20
1.50
2.75
93.59
81.95
92.26
79.59
78.50
85.95
85.77
76.10
92.89
83.92
89.05
71.48
7.68
5.79
7.16
6.24
11.65
12.19
8.78
5.26
6.41
5.66
8.97
2.99
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
39/84
34
Table 3.3: Dust fall rate and its components at Agra Fort for the year 2010
Month pH TotalInsolubleMatter (%)
VolatileMatter
(%)
WaterSolubleDust (%)
InsolubleInorganicMatter (%)
TotalInorganicMatter (%)
Dust Fall Rate(MT/Km
2/month)
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
7.0
7.0
6.8
7.7
7.5
7.5
7.7
6.5
6.5
6.96
6.80
7.2
12.83
16.30
10.70
31.08
23.35
16.06
29.24
59.79
24.80
18.90
13.78
17.76
9.51
14.55
8.44
26.76
20.36
12.67
21.53
57.41
19.32
15.89
12.70
17.29
87.17
83.70
89.30
68.92
76.65
83.94
70.76
40.21
75.20
81.10
86.22
82.24
3.32
1.75
2.26
4.32
2.99
3.39
7.69
2.38
5.48
3.00
1.08
0.47
90.49
85.45
91.56
73.24
79.64
87.33
78.47
42.59
80.68
84.11
87.30
82.71
6.31
5.72
6.50
6.49
8.50
10.33
5.52
2.14
2.24
4.52
7.59
14.36
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
40/84
35
Table 3.4: Dust fall rate and its components at Sikandra for the year 2010
Month pH TotalInsolubleMatter (%)
VolatileMatter
(%)
WaterSolubleDust (%)
InsolubleInorganicMatter (%)
TotalInorganicMatter (%)
Dust Fall Rate(MT/Km
2/month)
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
6.5
7.5
6.0
7.5
7.2
7.0
7.2
6.7
6.8
6.78
7.20
7.6
7.54
22.18
7.07
25.39
26.63
16.57
23.77
25.98
13.75
11.54
13.52
68.29
4.69
21.11
4.57
22.29
24.98
9.11
44.84
24.56
10.19
10.17
12.43
66.03
92.46
77.82
91.21
74.61
73.37
83.43
76.23
74.02
86.25
88.46
86.48
31.71
2.85
1.07
2.50
3.10
1.65
7.46
1.35
1.40
3.56
1.38
1.09
2.26
95.31
78.89
95.43
77.71
75.02
90.89
77.57
75.42
89.81
89.83
87.57
33.97
3.38
3.50
6.56
6.03
6.52
6.74
6.31
6.05
3.61
7.40
9.08
3.25
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
41/84
36
Figure 3.2: % Total Insoluble Matter at Taj Mahal, Agra Fort & Sikandra for the
year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
42/84
37
Figure 3.3: % Volatile Matter at Taj Mahal, Agra Fort & Sikandra for the year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
43/84
38
Figure 3.4: % Water Soluble Matter at Taj Mahal, Agra Fort & Sikandra for the year
2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
44/84
39
Figure 3.5: % Total Inorganic Matter at Taj Mahal, Agra Fort & Sikandra for the
year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
45/84
40
3.2 Suspended Particulate Matter
Suspended particulate matter (SPM) in air generally is a complex, multi-phase
system of all airborne solid and low vapor pressure liquid particles having aerodynamic
particle sizes from below 0.01-100 m and larger.
Particulate in a stack effluent may because of their differing physical properties,
have motions different from the gaseous components. The greater mass density of
particulates results in gravitational forces which cause a down ward component of
motion. The effect of gravitational forces is generally identified by free-fall (settling,
terminal) velocity of a particle in a motionless body of air. This depends on particle size,
mass density and configuration as well as mass density and viscosity of the ambient air.
The term particulate refers to all atmospheric substances that are not
gaseous. They can be suspended droplets of solid particles or mixtures of two.
Particulate can be composed of inert or extremely reactive materials ranging in the size
from 100 m to 0.01m. The reactive material may further oxidize or may react
chemically with the environment. Particulate of the size less than 10 m are termed as
suspended particulate matter. Particulate from soils and minerals primarily contain
calcium, aluminum and silicone compounds. Organic compounds are released into the
atmosphere mainly by the processing and use of petroleum products. The damage
caused by the pollutants is well known phenomenon. Particulate such as soot, dust and
fumes damage painted surfaces, fabrics & buildings. Due to their abrasive nature,
particulate can cause damage to exposed surfaces when they are driven by wind at
high velocities.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
46/84
41
3.2.1 Suspended Particulate Matter at Taj Mahal
At Ambient Air Quality Monitoring Station of Taj Mahal, the sampling of
S.P.M. is being carried out on 8 hour bases on everyday of month by employing High
Volume Sampler (HVS). The glass micro fiber filter paper has been used for the
sampling of S.P.M.
The data obtained have been compiled in Table 3.5 & Figure 3.6. The maximum
concentration of S.P.M. for a day was estimated is 627.94 g/m3 in the month of
November while minimum concentration for a day was estimated is 10.30 g/m3 in the
month of September. The maximum monthly average concentration of S.P.M. was
determined is 354.15g/m3 for the month of April while minimum monthly average
concentration was determined is 50.94g/m3 for the month of August. The annual
average concentration was calculated is 229.87g/m3, which is slightly decreased as
compare to previous five consecutive years, i.e. 2005, 2006, 2007, 2008 & 2009. As
usual, it was observed that the monthly average concentration remained below the safe
limit in the month of August & September while rain was occurred and then started
increasing and finally estimated high during winter season i.e. in the month of
December. The Thermal inversion and calm condition in atmosphere were responsible
to increase the concentration of S.P.M. in ambient air at winter season.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
47/84
42
Table 3.5. Concentration of S.P.M. (g/m3) in the ambience of Taj Mahal for theyear 2010
Month S.P.M. (g/m3)
Max. Min. Avg.
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
304.82
380.64
436.39
499.99
569.85
384.02
315.80
77.29
250.27
485.28
627.94
518.18
135.15
95.46
224.75
254.88
159.35
108.50
35.93
26.18
10.30
117.93
79.92
205.13
210.12
228.57
311.99
354.15
303.18
259.76
101.54
50.94
81.61
266.95
288.05
301.54
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
48/84
43
Figure 3.6: Concentration of SPM (g/m3) in the ambience of Taj Mahal for the
year 2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
49/84
44
4. Gaseous Pollutant
Gaseous pollutants consist of atoms, molecules and include harmful gases,
which can freely mix with air without settling down. Some examples of gaseous
pollutants of air are carbon monoxide, carbon dioxide, sulphur dioxide, hydrogen
sulphide, nitrogen oxides and hydrocarbons. The gaseous pollutants which are directly
released into the atmosphere as a result of direct anthropogenic activities are classified
as primary pollutants. These are mostly the products of combustion of fossil fuels
(carbon dioxide, carbon monoxide, sulphur dioxide, oxides of nitrogen etc.), sulphurdioxide is produced during combustion of fossil fuels because such fuels always contain
some amount of sulphur. This is an acidic gas and finally gets converted to sulphuric
acid in the atmosphere which is responsible for the Acid Rain. Acid rain is particularly
harmful for vegetation as well as heritage monuments because of their acidic nature. As
an example, coal with 1.5 % sulphur by weight when burnt in a power station gives a
flue gas containing between 2-3 gm-3 of oxides of sulphur or in the region of 0.1 % by
volume. Among the oxides of sulphur, only SO2 and SO3 are of significant importance
as gaseous air pollutants. Of the sulphur oxides, more than 95% by volume is SO2 and
less than 5 % is SO3. In the atmosphere, SO2 gets oxidised to SO3 which in the
presence of water forms sulphuric acid.
The concentration of SO2 to be found in the atmosphere is governed not only by
the number of size of local sources but by other factors such as stack height and
meteorological parameters influencing the diffusion and dispersion pattern of gaseous
pollutants.
Another gaseous pollutant that is of significant destructive action is oxides of
nitrogen (NOx). These are products of high temperature combustion of fossil fuels.
Automobile emission is the main contribution of NOx in the urban atmosphere followed
by emission of thermal power plants. NOx is primarily responsible for photochemical
smog formation in the metropolitan areas.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
50/84
45
4.1 Oxides of Sulphur
The most important oxide emitted by pollution sources is SO2. Sulphur dioxide is a
colourless gas, moderately soluble in water and forms weakly acidic sulphurous acid. In
a polluted atmosphere, SO2 reacts photo-chemically or catalytically with other pollutants
or normal atmospheric constituents to form SO3, H2SO4 and salts of H2SO4. Sulphur
dioxide is mostly responsible for metallic corrosion. Sulphuric acid mist in the
atmosphere causes deterioration of structural materials such as marble and lime stone
by forming precipitate of their constituents. Many priceless marble sculptures and
buildings have suffered damage in the last 30 years or so as a result of increased
concentration of SO2 in the atmosphere.
Sulphur dioxide is monitored and analyzed by Modified West & Gaeke
method using Sequential Air Sampler (SAS) on 4 h basis. Tetra chloro mercurate (TCM)
is used as absorbing reagent for SO2. The concentration of SO2 is then measured
through spectrophotometer at specific wavelength 560 nm.
The data showing the concentration of SO2 in the ambience of Taj Mahal has been
compiled in Table 4.1 & Figure 4.1. The maximum concentration of SO2 for a day was
estimated as 9.03 g/m3 in the month of April while minimum concentration of SO2 for a
day was estimated as 3.00 g/m3 in every month of the year. The maximum monthly
average concentration was calculated as 4.60 g/m3 for the month of April while
minimum monthly average concentration was calculated as 3.00 g/m3 for the month of
July. The annual average concentration was calculated as 3.41g/m
3
. Both, monthlyaverage and annual average concentration were observed well below the safe limit
prescribed for sensitive zone i.e. 30g/m3 and 15g/m3 respectively.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
51/84
46
Table 4.1. Concentration of SO2 (g/m3) in the ambience of Taj Mahal for the year
2010
Month SO2 Concentration (g/m3)
Max. Min. Avg.
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
6.85
4.37
5.17
9.03
4.39
4.19
3.01
3.29
5.62
3.90
7.47
7.71
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.00
3.23
3.26
3.46
4.60
3.22
3.08
3.00
3.03
3.22
3.13
3.71
3.93
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
52/84
47
Figure 4.1: Concentration of SO2 (g/m3) in the ambience of Taj Mahal for the year
2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
53/84
48
4.2 Oxides of Nitrogen
Out of seven oxides of nitrogen, only three N2O, NO & NO2 are formed in
appreciable quantities in the atmosphere. NO& NO2 are analysed together in air and are
referred as NOx. Nitrogen dioxide in the atmosphere converts into nitrous and nitric acid
in the presence of moisture. These acids impart corrosive effects on metal species. The
CaCO3 content of marble on reaction with nitrogen acids converts into precipitate of
calcium nitrate, thus causing deterioration on marble surfaces.
NO2 is determined by Jacob & Hochneiser or Sodium-Arsenite method. Sampling
of NO2 has also been carried out by Sequential Air Sampler on 4 h basis. Alkaline
sodium arsenite solution is used as absorbing reagent. The concentration of oxides of
Nitrogen is determined through spectrophotometer at specific wavelength 540 nm.
The data showing the concentration of NO2 in the ambience of Taj Mahal has been
compiled in Table 4.2 & Figure 4.2. The maximum concentration of NO2 for a day was
estimated as 20.78 g/m3 in the month of November while minimum concentration of
NO2 for a day was estimated as 3.00 g/m3 for the month of July. The maximum
monthly average concentration was calculated as 13.42 g/m3 for the month of March
while minimum monthly average concentration was calculated as 4.34 g/m3 for the
month of July. The annual average concentration was calculated as 8.27 g/m3. In this
year, monthly average and annual average concentration were observed below the safe
limit prescribed for sensitive zone.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
54/84
49
Table 4.2. Concentration of NO2 (g/m3) in the ambience of Taj Mahal for the year
2010
Month NO2 Concentration (g/m3)
Max. Min. Avg.
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
16.73
11.83
20.67
13.73
12.08
9.34
6.60
12.51
12.18
17.22
20.78
18.84
3.60
3.64
8.21
3.98
3.09
3.17
3.00
3.93
3.20
3.67
6.83
7.21
8.02
6.64
13.42
7.90
6.30
5.75
4.34
7.64
6.97
8.04
12.53
11.64
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
55/84
50
Figure 4.2: Concentration of NO2 (g/m3) in the ambience of Taj Mahal for the year
2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
56/84
51
5. Sulphation Rate at Taj Mahal & Sikandra
Sulphation rate is referred as rate at which sulphur dioxide gets converted into
sulphur trioxide in the atmosphere. Being a reactive species SO3 forms sulphuric acid
under favorable conditions. The formation of such kind of acid mist or sulphate bearing
particulate when strikes with the monuments and building results in erosion and
corrosion of the surface. A glass test tube having a area of 100 cm2 is wrapped with a
cotton gauge soaked in a solution of weighed quantity of lead dioxide in gum
tragacanth. The test tube is kept in open atmosphere for one month. Lead dioxide
reacts with SO3 present in the atmosphere for one month. Lead dioxide reacts with SO3
present in the atmosphere to produce PbSO4. Lead sulphate is then estimated as
barium sulphate by measuring transmittance at 420 nm. The rate of conversion of SO2
into SO3 is then calculated.
The data showing the Sulphation rate have been compiled in Table 5 & Figure 5.
The maximum value of sulphation rate for Taj Mahal and Sikandra was determined as
0.0459 gmSO3 /m2 /day and 0.0816 gmSO3 /m
2 /day for the month of May and March
respectively. The minimum value of sulphation rate for Taj Mahal and Sikandra was
determined as 0.0164 gmSO3/m2 /day and 0.0086 gmSO3 /m
2 /day for the month of
March and February respectively.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
57/84
52
Table 5. Sulphation rate (gm SO3/m2/day) at Taj Mahal & Sikandra for the year
2010
Month Taj Mahal Sikandra
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
DEC
0.0357
0.0374
0.0164
0.0444
0.0459
0.0322
0.0250
0.0258
0.0272
0.0166
0.0239
0.0172
0.0148
0.0086
0.0816
0.0319
0.0349
0.0335
0.0290
0.0166
0.0172
0.0209
0.0341
0.0435
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
58/84
53
Figure 5: Sulphation Rate (gmSO3/m2/day) at Taj Mahal & Sikandra for the year
2010
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
59/84
54
6. Current Scenario of Air Pollution at Taj Mahal
The annual average concentration of S.P.M., SO2 & NO2 for last seven years
tabulated below which reflect the clear picture regarding air quality scenario in the
ambience of Taj Mahal, Agra.
On the basis of above observation it can be concluded that the environmental status
has slightly improved since early 2006. As we have noticed that the concentration of
gaseous pollutants as well as concentration of S.P.M. has decreased considerably. The
improvement in environmental status is due to closer of foundry industries and other
small scale industries from TTZ. Along with this introduction of CNG and LPG operated
vehicles in public and private transport and development of green belt at TTZ has also
helped to improve the environmental status.
Year S.P.M.( Conc. in g/m3 )
SO2( Conc. in g/m3 )
NO2( Conc. in g/m3 )
2004 286.00 3.78 19.63
2005 275.00 3.48 16.07
2006 273.03 3.50 07.86
2007 263.41 3.42 07.45
2008 273.92 4.06 07.56
2009 253.10 3.41 06.61
2010 229.87 3.41 08.27
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
60/84
55
The scenario of air quality in the ambience of Taj Mahal can further be improved by
taking following measures
1. There should be enough plantations in Taj Tripezium zone to prevent the flow of
dust laden wind.
2. In the radius of at least 5 Kms. from Taj Mahal, decongestion in traffic will be
needed.
3. In the residential and commercial areas which are located around Taj Mahal, the
people should be encouraged to use solar energy system instead of diesel
operated generator during the power cut / failure.
4. The water level in river Yamuna should also be maintained throughout the year.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
61/84
56
1. Introduction
Agra is rich in tangible cultural heritage having three World Heritage monuments
and several other nationally important monuments with incredible architecture. Taj
Mahal is the most famous World Heritage Monument of India. It was built by Mughal
Emperor Shah Jahan in 1643 on the bank of Yamuna. Besides Taj Mahal, Agra also
witness two more prominent World Heritage Monuments Agra Fort and Fatehpur Sikri
built by Mughal Emperor Akbar. Itmad-Ud-Daulahs tomb, Jama Masjid, Chini-Ka-
Rauza, Akbars tomb etc. are also some of the beautiful archaeological buildings.
In order to study state of conservation of above World Heritage Monuments and
to advise on various conservation problems, a team of UNESCO experts jointly with a
representative of Rhone-Poulenc, France visited Agra, India during 16-24 March, 1997.
After the visits to important monuments and on site discussions, the expert team of
UNESCO had a detailed deliberation with the representatives of Archaeological Survey
of India to explore the possibility of support from UNESCO/ Rhone-Poulenc in the field
of conservation of World Heritage and other monuments of Agra. UNESCO and Rhone-
Poulenc, France have agreed to provide financial as well as technical assistance in the
establishment of the laboratory. Accordingly, ASI was advised to work out requirements
for the equipments and other facilities. It was also recommended that ASI should
appoint one Physicist, one Geologist and one biologist to cater to the need of
multidisciplinary approach to the problems and to make the conservation much effective
and long lasting.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
62/84
57
1.1 Setting Up of Stone Conservation Laboratory
As per UNESCO-ASI-Rhone-Poulenc programme, the Stone Conservation
Laboratory has been set at Agra Fort, Agra and is functioning well for the cause of
conservation and preservation of World Heritage Monuments of Agra and other tangible
Cultural Heritage. Mr. Christian Manhart, UNSECO representative and ASI officials
jointly studied the requirements of instruments for the stone conservation laboratory and
as mutually agreed upon, following instruments have been procured through UNESCO
representative in India.
Stereo-microscope : To obtain three dimensionalzooming view of object
Polarizing microscope : To identify mineral composition of the rock
Isomet 1000 : To cut the rock specimen to prepare thin section
Ecomet-3 : To grind and polish the rock specimen
Slide warmer : To fix the rock specimen on the glass slide by hot
mounting process
Petrothin : Grinding & cutting of mounted specimen
The following equipment have also been procure to upgrade the Stone
Conservation Laboratory:
Compression Testing Machine :To evaluate compressive strength of stone block
Digital Camera & Software : As an aid to microscope for mineral identification
for microscope
Vacuum Impregnator :To consolidate weak rock sample before thin section
preparation
Mini Gloss Meter : To measure the gloss of stone surface
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
63/84
58
2. Research Work
As the stone conservation laboratory is equipped with facility to prepare thin
section of stone samples and their microscopic studies. The stone samples of different
monuments and quarry have been received from the Laboratory of Director (Science),
ASI, Dehradun as well as from other establishments of ASI. During the year following
studies have been carried out in the Stone Conservation Laboratory:
Petrographic studies of stone samples of different monument.
Comprehensive Scientific investigations on Itmad-ud-daulah.
2.1 Petrographic Studies
Petrographic studies of inlayed stone samples of Taj Mahal have been carried
out to determine the texture, grain size, distribution pattern, binding material and mineral
composition of rock employed in inlay work. The transmitted light microscopy used in
identifying the constituent minerals reveals the complete inner matrix of the rock. The
porosity of the rock can also be assessed with the help of this study.
2.1.1. Samples
The stone samples were collected from Taj Mahal. One of the stone samples
was received from the office of the Director (Science), ASI, Dehradun. The thin sections
of stone samples were prepared in the Stone Conservation Laboratory, Agra.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
64/84
59
2.1.2. Preparation of thin sections
The thin sections of stone samples were prepared in the laboratory. The samples
were first cut in desirable shape & size by using Isomet-1000 stone cutter and then
ground and polished by different grit size carbimet papers with the help of Ecomet-3
grinder/polisher until the desired surface is obtained to mount on the glass slide. After
the mounting, the samples were again ground/polished to obtain a proper thin section.
2.1.3. Petrographic description
The thin sections of stone samples were subjected to microscopic studies to
obtain photomicrographs by using polarizing microscope, Nikon Make, Model E 600
POL. The mineral identification was carried out with the help of Geological Survey of
India, Lucknow. The description of photomicrographs is as follows.
2.1.3.1 Inlayed Stones of Taj Mahal
Yellow Stone
The rock is fine grained and essentially contains fine grained carbonates in the
matrix. Numerous fragments, pellets and planer sections of fossils are embedded in the
matrix. Lithic fragments mostly fine to medium grained quartz & muscovite also occur
embedded in the matrix.
Due to abundant fossil shell fragments within fine grained carbonate mud in the
matrix the rock may be Biomicrite.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
65/84
60
Gray Stone
The rock is predominantly consisting of fine grained carbonate mud alongwith
fine grained quartz & fine flakes of muscovite. Micro-fine branching cracks are common
in the rock and these fractures are filled by fine grained opaque. The carbonate phase
rapidly effervesces with application of acid. The rock in general is very fine grained with
neatly interlocked carbonate mud and exhibiting granular habit. The rock name is
Mudstone.
Stone conservation Lab, Agra
Figure 1 (a).:Photomicrograph under high magnification showing abundance of
fragments, pellets and sections of fossilsembedded in a fine grained carbonate mud.
Cross polars, 10x objective.
Photomicrograph under higher maginification
showing the exact nature of the sectional view offossil (centre). Note the coarse grained nature of
neomorphic spars (marked NMS). Cross polars,20x objective.
Stone conservation Lab, Agra
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
66/84
61
Black Stone
Abundant fine grained xenomorphic quartz, plagioclase and carbonate constitute
the matrix of the rock. Granular fine hematite is randomly distributed and occurs asintergranular to quartz-carbonate assemblage. Fine flakes of mica are also present in
the rock. Fractures are common in the rock. The Rock is Calcareous Slate.
Stone conservation Lab, AgraStone conservation Lab, Agra
Stone conservation Lab A ra
Stone conservation Lab, Stone conservation Lab, Agra
Figure 2a: Photomicrograph under high magnification showing abundant fine grainedcarbonate mud with branching cracks filled with fine grained opaque which also occur as
dispersed in the matrix (fine black grains). Crosspolars, 10x objective.
Figure 2b: Photomicrograph under highermagnification showing the exact nature of the matrix constituent (abundant carbonate) with fracture filled opaque. Cross polars, 20x
objective.
Figure 3a: Photomicrograph under high
magnification showing abundant fine grained
quartz, carbonate, tiny grains of muscovite and granular opaque (mostly hematite) as matrix
constituent. Note the granular texture of the rock.Cross polars, 10x objective.
Figure 3b: Photomicrograph under higher magnification showing the exact nature of the
fine grained matrix constituents as detailed in above photograph. Note the fracture filled with
secondary, relatively coarser sized carbonate andquartz (marked Qz). Cross polars, 10x objective.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
67/84
62
2.1.3.2. Stone Sample of Sun Temple, Konark
Abundant medium to fine grained quartz with subsequent amount of stubby,
subhedral plagioclase occur as framework constituents of the rock. Thin mica plates
mostly muscovite also occur as ancillary. The quartz grains are mostly fractured and are
held together by ferruginous cement which is mainly hematite. Limonite is also present
as a result of oxidation of original cementing material. The rock is Ferruginous
sandstone.
Stone Conservation Lab, agra
Photomicrograph under high magnification showing abundant medium grained quartz (marked Qz), tiny grains of plagioclase
(marked Pl) and coarse, patchy hematite (marked Hm). Cross polars,
10x objective.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
68/84
63
3. Comprehensive Scientific Investigations on Itmad-Ud-Daulah
The Itmad-ud-daulah is also known as baby Taj due to architectural resemblance
with Taj Mahal although it was built well before about hundred years than Taj Mahal.
There areno complete scientific details on the monument. Therefore, the study focus on
the comprehensive scientific studies of materials used, weathering problems and their
remedial measures. In this part of the report the study has been carried out on following
points.
Detailed photo-documentation
Weathering Problems
Material used
Sample Collection
Microscopic Examination
3.1 Photo-documentation
In the first phase of the scientific investigation of Itmad-ud-daulah, the detailed
photo-documentation of the monument was carried out to know about material used and
basic problems of the monument.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
69/84
64
Stone Conservation Lab, Agra
Main Mausoleum of
Itmad-ud-daulah
One of the four gates of the
monument on the river side
Stone Conservation Lab, Agra
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
70/84
65
The beautiful inlay work on marble with ornamental stones.
(a) (b)
(c)
(a), (b)& (c) : Inlayed stone works on the marble surface
Octagonal shaped dome on the first floor Unique ornamental work on thefloor of the dome
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
71/84
66
Paintings on the lime plastered surfaces on the walls of main hall, side hall &
corner rooms along with stucco& painting work on the ceilings..
Painting on the corridor wall of main tomb Painting on stucco on the ceiling of corridor of
main tomb
Painting on the corridor wall of main tomb
Remains of painting on the upper
arch of river side gate
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
72/84
67
Inlaying of marble & black stone on red sandstone surface on the Gates of the
monument.
Different patterns of design(Top &
right) of inlayed marble & black stone
on red sandstone surface
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
73/84
68
3.2 Weathering Problems
Cracks: Cracks have seen on some decorated panels as well as on plane marble
blocks which may be due to mechanical stress and other physical factors.
Water marks due to seepage: Major factor of deterioration is water. The deposition of
insoluble salts as water marks and dissolution of matrix of ornamental stones are clearly
visible at several places.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
74/84
69
Disintegration of ornamental stone: Due to mechanical & environmental factors the
ornamental stones which are weaker in comparison to major building blocks get
deteriorated.
Due to formation of gap between inlayed stone and engraved surface, mortar
start loosing which ultimately results in detachment of ornamental stone.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
75/84
70
Fading of colour: It may be due to exposure to environment over a long period of time,
dissolution of matrix material & deposition of foreign material.
Crust deposition/ Patination: Crust/patina formation is very much predominant in
black ornamental stones. It may be due to deposition of salts, pollutants or may be due
to natural patina formation.
New
Old
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
76/84
71
Leaching of iron and disintegration of marble due to iron dowel.
Flaking & Chipping of Red sandstone: Mechanical & environmental factors leads to
develop this problem in red sad stone. Flaking & chipping is weathering pattern of
sedimentary rocks.
Iron leaching
Disintegration
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
77/84
72
Loss of Paintings: Inleft hand side picture, the painting loss may be due to bulging of
lime plaster which get restored later on. In right hand side painting loss may be due to
water seepage.
Partial loss No colour
3.3 Material Used
The basic structure of monument i.e. the main mausoleum and four gates has
been constructed with brick and lime mortar. The main mausoleum is veneered withwhite marble while gates with red sandstone. The main mausoleum is entirely covered
with inlay work. Mainly four types of inlay stones have been used.
Black stone
Yellow stone (Khatto)
Stone with embedded large yellow grains in reddish matrix (Ajubi)
Designer stone (Abri).
3.4 Sample Collection
Both the old and new samples have been collected with the help of In-charge of
the Monument. The photo-documentation of samples has been done which is shown
below.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
78/84
73
Samples of old Material
(a). Marble (b). Yellow Stone
(c). Ajubi (d). Abri
(e). Black Stone
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
79/84
74
3.5 Stereomicroscopic Studies
Black Stone
The stereo-photomicrograph of new & old samples, (a) & (b). The whitish
material is clearly visible in the photomicrograph of old stone sample which may
be deposition of salts or some other foreign material. The photomicrograph (c) is
also of old stone sample with thick lime mortar layer on the right side of
photomicrograph.
(a) (b)
(c)
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
80/84
75
Yellow Stone
The photomicrograph (a) of new yellow stone sample in 2xmagnification,
photomicrograph (b) of old yellow stone sample in same magnification. The aging
marks are clearly visible in old stone sample.
(a) (b)
The photomicrographs (c) & (d) are of new & old samples
respectively, and obtained by cutting the samples across the plane. Some
reddish tone in the stone matrix can be seen in old specimen.
(c) (d)
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
81/84
76
Abri Stone
The stereo photomicrographs of Abri stone sample, New (a) & Old (b), has
been taken in 1xmagnification. The roughness of surface in old stone is clearly
visible which indicates the deterioration of stone matrix due to long exposure in
environment. The uplift of pale yellow grains can be seen in the
photomicrograph due to recession of grain boundaries & loss of cementing
material.
(a) (b)
Ajubi Stone
The stereo photomicrographs of Ajubi stone sample, New (a) & Old (b), in
1xmagnification. The roughness of surface in old stone is clearly visible which
indicates the deterioration of stone matrix due to long exposure in environment.
The uplift of larger grains can be seen in the photomicrograph as in case of Abri
stone.
(a) (b)
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
82/84
77
3.6 TDS/Conductivity Measurement
The conductivity and total Dissolved Solids have been measured in the
ornamental stone samples with the help of Eutech conductivity meter, Model;
Con 510. De-ionised water has been used for the purpose. The results have
been shown below in the Table.
The conductivity and TDS value of new Yellow & Ajubi stone samples are higher
in comparison to old samples which may be due to less maturity of new stone
samples. There might be some other factors for this variation which is another
area of investigation.
3.7 Insoluble Inorganic matter
The results of conductivity & TDS measurements have been further
confirmed by determining insoluble inorganic matter of the ornamental stone
samples. The insoluble inorganic matter content has been found higher in new
yellow & ajubi stone samples in comparison to same old samples.
S.No. Description of stone
sample
Conductivity
(S)
TDS
(ppm)New Old New Old
1
2
3
4
BLACK
YELLOW
ABRI
AJUBI
49.7
81.8
73.0
76.9
48.4
56.4
78.8
56.5
24.8
40.9
36.5
38.4
28.2
28.4
39.4
28.3
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
83/84
78
4. Present Status of Work
The research work on the stone samples of different quarry of Chunar,
received from the Laboratory of Director (Science), ASI, Dehradun is under
progress. The second phase of scientific investigation on Itmad-ud daulah will be
carried out. This will include instrumental analysis of material used in the
monument.
Other Activities of Air Pollution and Stone Conservation
laboratory
Training has been imparted to the newly appointed Assistant
Archaeological Chemists to make them acquaintance with the facilities available
in the laboratory and their application.
Training has also been imparted to the students of PGDA, Institute of
Archaeology every year to them aware of the work being carried out in the
laboratory.
Demonstration on research activities in the laboratory to the Officials of
ASI and other institutions.
-
8/2/2019 Annual Report of Air Pollution and Stone Conservation Laboratory
84/84
Air Pollution Laboratory, Agra
The Air Pollution Laboratory of A.S.I., Agra came into existence soon after
the commissioning of oil refinery at Mathura. A number of short term surveys by
NEERI & other organizations in the seventies to assess the likely impact of air
pollutants particularly SO2 on white marble of Taj Mahal. Apart from refinery,
other contributing sources of air pollution at that time were thermal power plant
near Agra Fort, foundries, tanneries, brick-kilns etc.
Stone Conservation Laboratory, Agra Fort
Agra has three World Heritage Monuments along with several centrally
protected archaeological sites. The requirement of a laboratory was felt to study
the state of conservation and preservation of such important monuments. The
ASI with the help of UNESCO & Rohn-Polenc, France took initiative to establish
a stone conservation laboratory in Agra. Consequently the Stone Conservation
Laboratory as an integral part of Air Pollution Laboratory has been inaugurated
on 28th November, 2006.
Dy. Superintending Archaeological ChemistArchaeological Survey of India