an ai home robot company - ironpie m6+ user manual...3. put on side brushes in accordance to the l...
TRANSCRIPT
![Page 1: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/1.jpg)
Ironpie m6+USER MANUAL
![Page 2: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/2.jpg)
Safety Instructions
NOTE: CAUTION:
Before using this product, please read and follow all the following safety instructions, and keep this manual for future reference. Failure to follow the instructions and safety precautions in this manual may cause damage to the product.
1. Only authorized technicians can disassemble this product. Do not disassemble the product by yourself.2. This product is only compatible with the power adapter provided by the manufacturer.3.Do not touch wires, sockets or power adapters when your hands are wet. 4.Do not place this product near cigarette butts, lighters and other smoldering fires.5. Do not bend wires excessively or place heavy or sharp objects on the robot.6. The Ironpie m6+ is for indoor use only.7.Do not sit on the robot.8. Do not run the robot in wet and humid environments such as bathrooms.9. Before using this product, please remove all vulnerable items (e.g., glasses, lamps, etc.) on the ground as well as items (e.g., wires, paper sheets, curtains) that may entangle the side brushes and the suction passage.10.Do not place the robot on a table or a chair where it might fall off. 11.Please carefully check whether the power adapter is connected to the socket before use, otherwise the battery may be damaged.12.Please inform other family members when it starts operating to prevent slips and trips.13.Please empty the dustbin when it is full.14.Please operate at room temperature. Do not expose the product or its batteries to freezing or extreme heat.15.Please remove the battery if it is damaged.16.Unplug the robot before replacing the battery.17.Please recycle the discarded batteries safely.
1.Only use rechargeable battery packs approved by the manufacturer.2. Do not use this product near any source of heat or open flame. 3. It is forbidden to use this product in extremely hot (above 40°C/ 104°F) or extremely cold (below 0°C/ 32°F).4. Remove small or fragile objects from the cleaning area before use. Remove objects on furniture that can fall if the furniture is bumped as well.5. Move any power cords as well as cords for blinds and curtains out of the way to reduce the risk of objects being pulled down.6. Do not use this product to pick up large debris, liquid spills, bleach, paint, petrol, or any flammable materials such as cigarettes, matches, and ashes.7.Do not block the suction port of the product. Keep suction port free of lint, hair and other matter. 8. Do not drag the power cord or place it near any source of heat. Doing so may result in damage to the cord, leading to fire or electric shock.9. Stop using the product if the charging station is damaged. 10.Do not burn the product. It can lead to battery explosions.
1
![Page 3: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/3.jpg)
Table of Contents
Pause, Recharge, and Shutdown
In the BoxAbout Your IronpieGet StartedChargingStart Cleaning 8
8
App Installation 9
Water Tank 11
Dustbin Cleaning 12
Water Tank and Cleaning Cloth Care 15
Brush Care and Cleaning 16
Charging Contacts, Cliff Sensor, and Wheels 17
Troubleshooting 18
Indicator Lights 20
Specifications 21
3
4
6
7
Customer Service 23
2
![Page 4: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/4.jpg)
Ironpie m6+ Charging Station
Side Brushes
Cleaning Brush
High Efficiency Filter
3
Power Adapter
Dustbin
In the Box
Water Tank
Cleaning Cloth
![Page 5: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/5.jpg)
4
About Your Ironpie
Power Button
Surface Cover
Omnidirectional Lens
Recharge ButtonCamera
Cliff Sensor
Side Brushes
Drive Wheels
Dustbin
Charging Contacts
Front Wheel
Main Brush Assembly
Battery
Dustbin Release Button
Front View Back View
![Page 6: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/6.jpg)
5
High Efficiency StrainerFilter Door
Signal Indicator
DC Plug
Charging ContactsDustbin Side Cover
Dustbin Conductive Sheet
Primary Filter Strainer
Dustbin Metal Sheet
Dustbin Charging Station
![Page 7: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/7.jpg)
6
Get Started
Remove Protection
To get started, remove the protective strips on the robot and the protective film on the charging station.
Remove the protective strips Remove the protective film
![Page 8: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/8.jpg)
7
Charging
1. The charging station should be placed against the wall and on a flat ground. Place your charging station in a clutter free area leaving the following distances around it.
2. Plug the adapter into a standard electrical outlet and into Ironpie’s charging port.3. Put on side brushes in accordance to the L (Left) and R (Right) marks.
Attention:
4.Place the robot on the charging station to start charging.
1. Do not expose the charging station to direct sunlight or mirrors. 2. In order to ensure the normal working hours of the robot, please fully charge it before use. The charging takes about 5 hours.
The robot will automatically return to the charging station when the battery is low. You can also hit the Recharge button on the robot or through Trifo Home app to charge the robot manually.
• At least 1.5 feet (0.5 meters) on each side of the charging station • At least 5 feet (1.5 meters) in front of the charging station
0.5m1.5ft
0.5m1.5ft
1.5m
5ft
![Page 9: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/9.jpg)
8
Start Cleaning
Pause, Recharge, and Shutdown
The Ironpie m6+ creates a logical zigzag cleaning pattern to cover your entire floors.To wake up the robot, long press the Power button until you hear the startup sound. Short press the Power button once again to start cleaning.
Pause: Press the Power button to pause the operation.Recharge: Short press the Precharge button to start recharging when the robot is operating or paused. To stop recharging, short press the Power button.Shutdown: Long press the Power button until the indicator light goes out. * Always store the robot on the charging station so it’s charged and ready to clean when you need it.
![Page 10: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/10.jpg)
9
App Installation
Download“Trifo Home”app from Google Play or Apple's App Store. Connect your mobile device to a 2.4GHz and 802.11b/g/n bands Wi-Fi network.
3. Select the product model you want to add;
1. Create an account with your email address or your phone number;
4. Please first make sure the system is on, then press and hold the recharge button for at least 5 seconds until you hear the voice of entering network configuration and the light is blinking yellow and green, then click “Next”;
2. Click “+” to add device;
![Page 11: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/11.jpg)
10
7. Please wait for the connection process. It will take about 2 minutes;
5. Enter the Wi-Fi password, then click “Next”;
8. Name your robot and you’re all set!
6. A QR code will be generated on your phone. Use the camera on the robot to scan the QR code. Wait until you hear “Connection successful” before you click “Next”;
![Page 12: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/12.jpg)
11
Water Tank
** When mopping, do not use the Ironpie m6+ in areas where wetness can damage carpets, rugs, or unfinished/ unsealed floors.** When mopping is finished, empty any remaining fluid from the water tank and remove the cleaning cloth.
1. Fill the tank with water. 3. Install the water tank.
2. Put on the cleaning cloth. 4. Press the Power button to start mopping.
![Page 13: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/13.jpg)
Dustbin Cleaning
A. Press the dustbin release button.
B. Open the side cover of the dustbin. D. Open the filter door.
C. Empty the dustbin.
12
![Page 14: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/14.jpg)
E.Take out the High Efficiency Strainer and the Primary Filter Strainer before you remove the debris.
F.Rinse the Primary Filter Strainer only. Do not rinse the High Efficiency strainer.
G.Scrub the dustbin with a cloth.
13
![Page 15: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/15.jpg)
H. Dry the dustbin and filters, and keep it dry to maximize its lifespan.
I. Put the High Efficiency Strainer and the Primary Filter Strainer back.
J. Close the filter cover and put the dustbin back.
Note: We recommend rinsing the Primary Filter Strainer 15 to 30 days after first use. The maximum lifespan of the High Efficiency Strainer is 3 months.
Note: 1. Make sure they are both dry. 2. Do not expose both strainers directly under sunlight.
Note: Make sure no water seeps in through the suction port while cleaning.
14
![Page 16: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/16.jpg)
Water Tank and Cleaning Cloth Care 1. Remove the water tank.
4. Wash the cleaning cloth.
2. Remove the cleaning cloth.
5. Dry the cleaning cloth.
3. Empty the water tank.
6. Air dry or towel dry the water tank.
15
![Page 17: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/17.jpg)
Brush Care and Cleaning 1. Open the main brush cover.
3. Clean the tangled hair.
2. Take out the main brush shaft.
Clean main brush
Clean side brushes
16
![Page 18: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/18.jpg)
Clean the charging contacts.
Clean the cliff sensor.
Clean the drive wheels and the caster wheel.
Tips: Please use a dry cloth to clean the charging contacts, the cliff sensor and the bumper to avoid damage to sensitive electronic components.
Charging Contacts, Cliff Sensor, and Wheels
* If you do not use the robot for a long time, please fully charge it before long-term storage. Recharge it every three months to protect the battery from over-discharging. Please contact us if the battery is over-discharged. Do not disassemble the product yourself.
17
![Page 19: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/19.jpg)
Transport robot back to dock Make sure the charging station is plugged in, then place the robot on the charging station to charge.
Side brush stuck
Main brush stuck Check if the main brush gets entangled with hair or debris and clean it up.
Make sure the dustbin is in the robot and properly seated in position.
Gently tap the bumper several times to dislodge any debris that may be trapped underneath.
Check if the fan gets entangled with hair or debris. Also check if the filter is installed correctly.
Check if the side brush gets entangled with hair or debris and clean it up.
Bumper stuck
Blower motor error
Dustbin missing
Prompt Tone What To Do
Charging errorMake sure the original battery is installed.Make sure the robot can be powered on.Make sure both the robot and the charging station are placed correctly.
Troubleshooting
18
![Page 20: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/20.jpg)
Front wheel stuck Check if the front wheel can move freely. If not, unscrew the front wheel and clean it up.
Ensure the robot is connected to a 2.4GHz and 802.11b/g/n bands.Connection failed
Connection failed, password error Double check that you filled in the correct Wi-Fi password.
19
![Page 21: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/21.jpg)
Power button: solid green Recharge button: flashing yellow
Power button: solid red
Power button: solid green
Power button: solid green Recharge button: sold yellow The robot is looking for the charging station.
Network configuration begins.
The robot is recharging.
Power is on and the robot is running properly.
The robot is not functioning.
Battery is low.
Power button: flashing green Recharge button: flashing yellow* Two lights flash alternately
Recharge button: solid yellow
20
What It Means
Indicator Lights
Indicator Light
![Page 22: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/22.jpg)
21
Robot dimensions
Battery
Cleaning
System
Diameter 13 inches/ 330 mm
3 inches/ 74 mm
6 lbs/ 2.7 kg
14.4 volts
2500 mAh rechargeable lithium battery pack
12 oz/ 350 ml
300 mins* Charging time under normal conditions is approximately 300 minutes.
100 mins * With a full charge, the Ironpie m6+ will clean for approximately 100 minutes.
28 watts
14.4 volts
Height
Net weight
Voltage
Battery
Water tank capacity
Charging time
Charging time
Power
Operating voltage
Specifications
* This information is subject to change, and Trifo reserves the right to update the product specifications.
20 oz/ 600 mlDustbin capacity
![Page 23: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/23.jpg)
Pb/Pbcompound
Hg/Hgcompound
Cd/Cdcompound
Cr(VI)Cr(VI)compound PBB PBDE
Harmful SubstanceComponent
Plastic
Host circuit moduleHardware
ElectronicBattery
Plug power cord
(Metal part)
22
Description: This form is prepared in accordance with the provisions of SJ/T 11364. 〇 : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in the current valid version of GB/T26572. × : Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirement stipulated in the current effective version of GB/T26572, and there is no mature alternative in the industry, which meets the environmental protection requirements of the EU RoHS Directive.
The number in this logo indicates that the product has an environmental protection period of 10 years under normal use.
Executive standard: GB4706.1-2005 GB4706.7-2014 GB4343.1-2009 GB17625.1-2012
![Page 24: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/24.jpg)
23
Customer Service
12-Month Limited Warranty
Lifetime Technical Support
@TrifoRobotics
![Page 25: an AI Home Robot Company - Ironpie m6+ USER MANUAL...3. Put on side brushes in accordance to the L (Left) and R (Right) marks. Attention: 4.Place the robot on the charging station](https://reader034.vdocuments.mx/reader034/viewer/2022050111/5f48adce54fcf2785258afa6/html5/thumbnails/25.jpg)
For FAQs and more information, please visit:www.trifo.com