AMR SALAMASenior field service Engineer (I&C)

Email: amr.me.salama@gmail.com Amr.Salama@emerson.com

Mobile: +971 562043144Revision Date – Nov 18th, 2016

Introduction: Graduated -2001-from Alexandria University, Engineering Faculty-communication & electronics-Joined Suez Oil Company “SUCO” in 2003 as instrument maintenance Engineer for on/off-shore facilities, in SUCO, started to work with legacy control systems like single loop controllers, Pneumatic and hydraulic systems, and relay logic for Emergency shutdown functions.

Joined Honeywell since 2008 in Kuwait as a service Engineer, supporting multiple sites KNPC (Mina Al-Ahmadi, Mina-Abdallah & Mina-Shuaiba refineries), experienced with spot services, on-line modifications, hardware add on projects in life plants.Moved to Honeywell Middle East B.V. Abu Dhabi, UAE since June 2014, where I started to lead projects with special focus on ESD systems, responsible for delivering the projects in the specified time, cost and quality objectives. Moved to Emerson process Management FZE Dubai, as Safety Instrumented Systems SIS Group leader as a member of the Dubai based Project team, which undertakes the design, implementation and FAT phases of Process Systems and Solutions (PSS) projects. The PSS projects include SIS (ESD/FGS/BMS) scope of work.

Specific qualifications:

Capable of taking responsibility to lead Service Department activities, installation / commissioning at site, duties include planning, profitability and matters relating to the efficient running of the project at site level, including commercial matters, Quality Procedures, Health and Safety.

Capable of working without direct supervision Report opportunities for further business to Service and Regional Sales Manager Travel when required, within the Middle East region. Look for continuous improvement opportunities. FS Eng (TÜV Rheinland, #9359/ 14, Safety Instrumented Systems)

Personal data

Date of Birth : 1/7/1979 Place of Birth : Alexandria Country of Nationality : Egypt Gender : Male Address : Abu Dhabi UAE Marital Status : Married Military Status : Completed Computer Skills : Very Good

Characteristics : Self-motivated, Dynamic, Efficient in team work, willing to travel abroad

Education

First University Degree : B.Sc. Engineering University : Alexandria University Faculty : Engineering Major : Electronics & Communication Engineering Grade : Good Graduation year : 2001 High School Name : Victory college

Spoken Languages

Arabic-Degree: Excellent English-Degree: Very Good

Training courses

TUV Functional Safety Program FSEng Certified. HUET & Sea Survival crafts. EPKS System / Server Configuration and Implementation (EXP02R400) Honeywell EPKS Server & controller implementation course (EXP2001R400) Honeywell EPKS server advanced implementation & administration (EXP23R400) Honeywell Safety Manager Advanced Implementation (4555) Honeywell Safety Manager implementation course (4551) Honeywell Fail Safe Control “FSC” Implementation course (4508) Honeywell Fail Safe Control “FSC” Advanced course (4512) DeltaV SIS implementation: (7305) SIS Safety Instrumented Systems - Safety Engineering SE101 SIS Safety Instrumented Systems - Safety Engineering (Advanced) SE201 Power Quality & Grounding (5590)

Work Experience

Total experience : 11 years in oil & gas field.Main skills : Honeywell ESD systems, Honeywell Experion PKS system

Current job

Current Job title : SIS Group LeaderEmployer : Emerson Process Solutions FZEEmployment term : Staff positionEmployee ID : 324525Employer Country  : United Arab of Emirates UAE Period : Feb 2016 to presentMain scope : DeltaV SIS

Field of experience and qualifications SIS Implementation – Supervise SIS leads for MEA assigned projects to ensure timely

delivery and quality of the design, configuration, Implementation and Testing. Take ownership of the SIS project engineering activities on all allocated projects and

proactively utilize methodologies, resources and techniques for minimizing the execution cost, whilst maintaining the requisite schedule and quality standard.

SMS Compliance – Ensure compliance to Emerson Safety Management System (SMS) procedures and processes. Perform safety configurations, develop and retain documentation related to customer safety requirements specifications.

provide the Project Manager with all necessary support and information to ensure that they are Schedule Management – Actively contribute to the development of a realistic and achievable project schedule and fully informed of resource requirements, progress and areas of risk.

Customer Relations – Be the primary contact for all matters relating to the scope and Engineering for allocated projects and by working closely with the Project Manager ensure that each customer’s expectations are fully understood, managed and achieved.

Communications – Ensure that all the project team members, inclusive of any third parties, are provided with all necessary and relevant information - details of scope, schedule, technical specifications and quality standards – to effectively deliver their allotted work.

Procurement – Provide the Project Manager with the procurement list detailed specifications for any sub-contracted works and services where relevant, along with required delivery dates.

Scope control – Fully understand the scope of work for each project with their portfolio, ensure that it is delivered to the requisite quality, budget and schedule and that the relevant Project Manager is fully informed, at the earliest opportunity, of any customer initiated changes in scope.

Quality control – Ensure that all Engineering activities are undertaken in accordance with the Company’s quality control processes and that the relevant standard is achieved.

Suppliers – Take overall responsibility for the management of the other parties – product vendors, sub-contractors, other Emerson teams and third parties undertaking work on behalf of a customer - that are providing products and services associated with the Senior Lead Engineer’s portfolio of projects.

Internal knowledge transfer – Actively share knowledge and experience with the MEA Engineering team and the wider organization.

Previous job

Previous Job title : Honeywell Process Solution “HPS” senior service EngineerEmployer : Honeywell Middle East HMEEmployment term : Staff positionEmployee ID : E433409Employer Country  : United Arab of Emirates UAE

Period : June 2014 to January 2016Main scope : ESD “Safety Manager & FSC “systems, Experion PKS system,

Field of experience and qualifications

Deliver Honeywell’s Life Services Solutions commitments to our customers. Lead projects during Engineering, Factory Acceptance Test (FAT), Site Acceptance Test

(SAT) and commissioning phases as required. Assist the project Management organization with preparation of project Execution

Plans and method statement preparation. Assist the sales organization during pursuit of Safety Solutions opportunities. Lead GES team during design, Engineering, FAT and site activities. Focal point for communications between customer, Honeywell front office and back

office ream. Carry out safety system audits to assess the safety system conditions, provides

recommendations and solutions Preventive and corrective maintenance of the Honeywell portfolio hardware and

software upgrades System modifications and additions – both on-line and off-line Carry out safety systems “FSC & SM” migrations on-line. Provide special / custom training to customers upon request Actively participate in Honeywell’s growth plans and identify opportunities to provide

additional services in the installed base Ensure customer satisfaction, process uptime and system performance while working

as the Resident Support Engineer or while representing Honeywell at customer locations in various roles

Projects with HME:

Halon replacement project at Upper Zakum UZ field

(Safety Manager –EPKS – Third party “fire and gas”)

Replacement of F&G system in Dubai Supply Authority DUSUP

(Safety Manager – Experion PKS)

Power Upgrade project at Zirku Island

(Safety Manager)

Margham Capacity Increase at Dubai Supply Authority DUSUP

(Safety Manager – C300 – EPKS)

Safety systems FSC &SM controller skills;

System design (Hardware & logic sheets) Maintenance activities (yearly, 3 months). Standard system checks (diagnostics). Replacing modules On-line software upgrades & Standard system modifications (Logic changes, adding

modules). Configure external communications with Experion PKS (SCADA, PCDI & CDA)

Configure safe net communications with safety manager systems and external communications with 3’rd parties.

Non-standard system modifications (COM cabling network, adding racks) Trouble shooting 2nd-line with remote assistance TAC L3 or higher Certified trainer for implementation and maintenance trainings.

Safety systems FSC &SM certificates: -

Certified safety service Engineer for the FSC safety system Certification level: L3, Service Engineer system: FSC safety system

Certified safety service Engineer for the safety manager system Certification level: L3, Service Engineer system: Safety Certified trainer manager system

Experion DCS skills;

Basic process control techniques and control strategy implementation. Installation and configuration for Experion DCS systems including Experion servers

with TPS interface, Simulation servers, C200 controllers (series A IO and PMIO), C300 controllers with series C I/O & PMIO, ACE controllers, consoles stations, flex stations & domain controller.

Configure Experion Server security. SCADA “Supervisory Control And Data Acquisition systems” configuration &

troubleshooting. Station and Server redundancy issues. C300 PCDI Connections to HC900/ML and Safety Manager.

Achievements:

Completed all assigned projects within the required time frame, and exceeding the financial results.

Provided technically Support other projects for ESD related issues, and escalation path with center of Excellence in Netherlands if required.

Previous job

Previous Job title : Honeywell Process Solution “HPS” lead EngineerEmployer : Honeywell KuwaitEmployment term : Staff positionEmployee ID : E433409Employer Country  : Kuwait

Period : June 2008 to June 2014Main scope : ESD “Safety Manager & FSC “systems, Experion PKS system,

One wireless HoneywellLocation of services : Kuwait KNPC refineries, KOTC, Qatar Halul, AbuDhabi Das

Island, Oman “Lekhwair & Marmul fields”

Field of experience and qualifications:

Engineering and Technical expertise in Process Automation and Control Systems Design, development, installation, commissioning and maintenance.

Application, Service & Sales support Experience on Honeywell Controllers C200/C300 “DCS”, FSC/SM “SIS” controllers.

Interfacing with the Client, engineering contractors and their packaged systems suppliers.

System installation, inspection and Site Acceptance Testing SAT. Pre-commissioning / loop checking assistance. Commissioning & start-up for Experion PKS, Safety Manager Systems & FSC systems. Performing routine and power down preventative maintenance, troubleshooting and

corrective maintenance. Performing trainings for Honeywell Employees and customers “Operator, maintenance

& Engineering trainings for SIS. Apply Global Service Management GSM procedures to perform various activities, uses

preventive Maintenance tool (PM tool) to generate tasks list.

Achievements:

Established special relation-ship with customers in Kuwait, being a consultancy for ESD related service activities.

Support the MEA region for critical migrations, add-on services jobs. Build team of younger Engineers in ESD systems, by classroom training and mentoring

in executing service activities.

Previous job

Previous Job title   : Instrumentation & Automation service EngineerEmployer   : Suez oil company “SUCO”Employment term : Staff positionEmployee ID : 2100Employer Country : EgyptPeriod : June 2003 to April 2008

Field of experience and qualifications:

Detailed Description:-

1. Carry out preventative maintenance (P.M) and troubleshooting for the following equipments instruments & control systems.

Pneumatic control panel for offshore diesel fire pump. Reciprocating compressors (DRESSER RAND). Water injection plant centrifugal pumps, sand filters and vacuum tower (SERCK

BAKER). Oil heater & de-Salter plant. Oil and gas separation plant offshore & onshore. Plant utilities (Multi stages flash desalination and air compressors). Waste water treatment plant. ESD system for the plant. Well head hydraulic control system for platforms (AUTOCON COMPANY) Automatic tank gauging ENRAF 854 ATG & 878 CPI. Fire alarm systems smoke and gas detection in process, tank farm accommodation

and offshore areas.

2. Participates in major overhaul and shutdown maintenance activities.3. Investigates and troubleshoots maintenance problems, implements fault-finding routines

and procedures, diagnoses problems and takes appropriate action.4. Inspects materials received to ensure conformance to required specifications and

arranges witnesses testing/operational use of spares to verify Compatibility with existing equipment, as instructed.

5. Understands the Company health, safety and environmental policy, Performs work in a safe and efficient manner.