wind top ae1900 - gfk etilizecontent.etilize.com/user-manual/1018841227.pdf · visit the msi...
Post on 30-Sep-2020
4 Views
Preview:
TRANSCRIPT
Wind Top AE1900All-In-One (AIO) PC
MS-6638 (V1.X) System
G52-66381X3
ii
Copyright Notice
The material in this document is the intellectual property of MICRO-STARINTERNATIONAL. We take every care in the preparation of this document, but noguarantee is given as to the correctness of its contents. Our products are undercontinual improvement and we reserve the right to make changes without notice.
Trademarks
All trademarks are the properties of their respective owners.Intel® and Pentium® are registered trademarks of Intel Corporation.AMD®, Athlon™, Athlon™ XP, Thoroughbred™ and Duron™ are registered trade-marks of AMD Corporation.NVIDIA®, the NVIDIA logo, DualNet and nForce are registered trademarks or trade-marks of NVIDIA Corporation in the United States and/ or other countries.PS/2® and OS/2® are registered trademarks of International Business MachinesCorporation.W indows® 95/ 98/ 2000/ NT/ XP/ VISTA are registered trademarks of MicrosoftCorporation.Netware® is a registered trademark of Novell, Inc.Award® is a registered trademark of Phoenix Technologies Ltd.AMI® is a registered trademark of American Megatrends Inc.
U.S. Patent Numbers
4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132.This product incorporates copyright protection technology that is protected by U.S.patents and other intellectual property rights. Use of this copyright protection tech-nology must be authorized by Macrovision, and is intended for home and other limitedviewing uses only unless otherwise authorized by Macrovision. Reverse engineer-ing or disassembly is prohibited.
Revision History
Revision Revision History DateV1.1 First Release May 2009
iii
Upgrade and Warranty
Please be noticed that the wireless LAN card, hard disk drive, and optical disk drivepreinstalled in the product users purchased may be upgradable or replaceable byuser’s request.
To learn more about upgrade limitation, please refer to the specification in the User’sManual. For any further information about the product users purchased, please con-tact the local dealer.
Do not attempt to upgrade or replace any component of the product, if you are not anauthorized dealer or service center, since it may cause the warranty void. It isstrongly recommended to contact the authorized dealer or service center for anyupgrade or replace service.
Technical Support
If a problem arises with your system and no solution can be obtained from the user’smanual, please contact your place of purchase or local distributor. Alternatively,please try the following help resources for further guidance.
Visit the MSI website for FAQ, technical guide, BIOS updates, driver up-dates and other information: http://www.msi.com/index.php?func=service
Contact our technical staff at: http://ocss.msi.com
iv
Safety Instructions1. Always read the safety instructions carefully.2. Keep this user’s manual for future reference.3. Keep this equipment away from humidity.4. Lay this equipment on a reliable f lat surface before setting it up.5. The ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating. Do not cover the ventilator.6. Check the AC input: 100-240V~, 50-60Hz, 1.5A.7. Check the DC output: 19V 3.42A.8. Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the equipmentto the power inlet.
9. Place the power cord in a way that people are unlikely to step on it. Do notplace anything on the power cord.
10. Always unplug the power cord before inserting any add-on card or module.11. All cautions and warnings on the equipment should be noted.12. Never pour any liquid into the opening that could damage or cause electrical
shock.13. If any of the following situations arises, get the equipment checked by ser-
vice personnel: The power cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment does not work well or you can not get it work according to
user’s manual. The equipment has dropped and damaged. The equipment has obvious sign of breakage.
14. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED,STORAGE TEMPERATURE ABOVE 40o C (102oF), IT MAY DAMAGE THEEQUIPMENT.
WARNING:1. For every changes in power cord’s usage, please use an approved power
cord with condition greater or equal to H05VV-F, 3G, 0.75mm2.2. Internal part is hazardous moving parts, please keep fingers and other body
parts away.3. For pluggable equipment, the socket-outlet shall be installed near the equip-
ment and shall be easily accessible.4. Do not disable the protective earth pin from the plug, the equipment must be
connected to an earthed mains socket-outlet.5. Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/ headphones output voltageand therefore the sound pressure level.
CAUTION:Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type recommended by the manufacturer.
1. The optical storage devices are classified as a Class 1 Laser products.Use of controls or adjustments or performance of procedures otherthan those specified.
2. Do not touch the lens inside the drive.
廢電池請回收
For better environmental protection, waste batteries should becollected separately for recycling or special disposal.
v
FCC-B Radio Frequency Interference StatementThis equipment has been tested andfound to comply with the limits for aClass B digital device, pursuant to Part15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residen-tial installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, maycause harmful interference to radio communications. However, there is no guaran-tee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the measures listed below:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/television technician for help.
Notice 1The changes or modif ications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
Notice 2Shielded interface cables and A.C. power cord, if any, must be used in order tocomply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.
Micro-Star InternationalWind Top Series
vi
WEEE (Waste Electrical and Electronic Equipment) Statement
vii
viii
ix
CONTENTS
Copyright Notice....................................................................................................iiTrademarks.............................................................................................................iiU.S. Patent Numbers.............................................................................................iiRevision History.....................................................................................................iiUpgrade and Warranty..........................................................................................iiiTechnical Support..................................................................................................iiiSafety Instructions................................................................................................ivFCC-B Radio Frequency Interference Statement.............................................vWEEE (Waste Electrical and Electronic Equipment) Statement.......................vi
Chapter 1 System Overview.............................................................................1-1Packing Contents.................................................................................1-2System Overview................................................................................1-3Mainboard Specifications.....................................................................1-10System Specifications.........................................................................1-11Hardware Setup..................................................................................1-12
Chapter 2 Getting Started.................................................................................2-1System Booting Setup for the First Time...............................................2-2How to Create the System Recovery Disk............................................2-3Touch Panel Calibration.......................................................................2-4How to Use the Keyboard....................................................................2-6Connecting to a Wireless LAN.............................................................2-8
1-1
System Overview
Congratulations for purchasing the Wind Top AE1900AIO PC. This is your best choice for all in one PC. It caneasily be set anywhere. The feature packed platformalso gives you an exciting PC experience.
System OverviewChapter 1
1-2
MS-6638 System
* The blank CD is for system recovery backup.* Please contact us immediately if any of the item is damaged or missing.* The picture is for your reference only and your packing contents may slightly vary
depending on the model you purchased.
Packing Contents
Wind Top AE1900AIO PC Power Adapter Power Cord
User Manual &Quick Guide
Driver & Utility& Blank CDLCD Display Wiper
MSI
Mouse (Optional)Keyboard (Optional)Stylus Touch Pen
(Optional)
1-3
System Overview
System Overview
Front View
4
5
1 Microphone
- The built-in microphone can be used for video chatting online.
2 Webcam
- The built-in webcam with the microphone can be used for pic-ture taking, video recoding, online conferencing and any otherinteractive applications.
3 LCD Display
- The 18.5-inch TFT LCD display is with an optimal resolution of1366 X 768 and standard proportion of 16:9 widescreen.
4
3
1 2
1-4
MS-6638 System
4 Stereo Speakers
- The built-in stereo speakers deliver high quality sound blaster withstereo system and Hi-Fi function supported.
5 Power Indicator
- The power indicator illuminates in green when the AIO PC is on,illuminates in orange when the AIO PC is in sleep mode and turnsoff when the AIO PC is off.
1-5
System Overview
Rear View
* We suggest that you should connect the power adapter to your AIO PC first andthen connect the power cord to the socket-outlet for safety reason.
2
3 5
1
1
1
1
4
6 7 8 9
10
1-6
MS-6638 System
1 Ventilator
- The ventilator on the enclosure is used for air convection and toprevent the equipment from overheating. Do not cover theventilator.
2 Optical Disk Drive
- A DVD Super-Multi drive is integrated for your home entertainment.
3 Card Reader Drive
- The built-in card reader may support various types of memorycard, such as XD (eXtreme Digital), SD (Secure Digital), SDHC(SD High Capacity), MS (Memory Stick), MS Pro (Memory StickPro) or MMC (Multi-Media Card) cards that usually used in de-vices like digital cameras, MP3 players, mobile phones and PDAs.Contact the local dealer for further information and please benoted that the supported memory cards may vary without notice.
4 Pop-Up Stand
5 Cable Routing Hole
- Route the cables through the cable routing hole to avoid cablespaghetti when connecting devices.
6 Power Jack
- The power adapter converts AC power to DC power for thisjack. Power supplied through this jack supplies power to the PC.To prevent damage to the PC, always use the supplied poweradapter.
7 USB Ports
- The USB (Universal Serial Bus) port is provided for attachingUSB devices such as mouse, keyboard, printer, scanner,camera, PDA or other USB-compatible devices.
1-7
System Overview
8 RJ-45 LAN Jack
- The standard RJ-45 LAN jack is provided for connection to theLocal Area Network (LAN). You can connect a network cableto it.
9 Microphone Jack (Pink)
- This connector is provided for microphones.
10 Headphone Jack (Green)
- This connector is provided for headphones or speakers.
Right
LED
Left
Color LED State Condition
Yellow
Green
Off LAN link is not established.
Off (steady state) LAN link is established.
On (brighter & pulsing) The computer is communicating with another computer on the LAN.
Off 10 Mbit/ sec data rate is selected.
On 100 Mbit/ sec data rate is selected.
On 1000 Mbit/ sec data rate is selected.Orange
Link IndicatorActivity Indicator
1-8
MS-6638 System
Side View
1 Optical Disk Drive
- A DVD Super-Multi drive is integrated for your home entertainment.
2 Eject Button
- Press the eject button to open the optical disk drive.
3 Eject Hole
- Insert a thin, straight object (such as a paper clip) into the ejecthole to open the optical disk drive manually if the eject buttondoes not work.
2 3
5
1
4
6
7
8 9
1-9
System Overview
4 Card Reader Drive
- The built-in card reader may support various types of memorycard, such as XD (eXtreme Digital), SD (Secure Digital), SDHC(SD High Capacity), MS (Memory Stick), MS Pro (Memory StickPro) or MMC (Multi-Media Card) cards that usually used in de-vices like digital cameras, MP3 players, mobile phones and PDAs.Contact the local dealer for further information and please benoted that the supported memory cards may vary without notice.
5 USB Ports
- The USB (Universal Serial Bus) port is provided for attachingUSB devices such as mouse, keyboard, printer, scanner,camera, PDA or other USB-compatible devices.
6 Ventilator
- The ventilator on the enclosure is used for air convection and toprevent the equipment from overheating. Do not cover theventilator.
7 Power Button
- Press the power button to turn the system on and off.
8 Volume Control Button +/-
- The volume control button adjusts the sound level.
9 Brightness Control Button +/-
- The brightness control button adjusts the screen brightnesslevel.
1-10
MS-6638 System
Mainboard Specifications
Processor
- Intel® AtomTM Single/ Dual-Core processor 230/ 330 (Optional)
- CPU Frequency 1.6 GHz
- Front Side Bus (FSB) 533 MHz
- Thermal Design Power (TDP) 4 W/ 8 W
Chipset
- North Bridge: Intel® 945GC chipset
- South Bridge: Intel® ICH7 chipset
Memory
- 1 DDR2 SO-DIMM slot (2 GB Max) for AtomTM Single/ Dual-Core CPUonly
LAN
- Supports Gigabit Ethernet Controller for PCI ExpressTM Applicationsby Realtek® RTL8111C
- Compliant with PCI 2.3
- Supports ACPI Power Management
Audio
- Chip integrated by Realtek® ALC888
- Compliant with Azalia 1.0 spec
Form Factor
- 210 mm (W) X 197 mm (H)
1-11
System Overview
System Specifications
LCD Display- 18.5” TFT LCD display with an optimal resolution of 1366 X 768 and
standard proportion of 16:9 widescreen
Input/ Output (I/O)- 1 power jack- 4 USB ports- 1 RJ-45 LAN jack- 1 headphone jack- 1 microphone jack
Power Supply- 65 watt power adapter with active PFC- Delta/ ADP - 65HB BB- I/P: 100-240V~, 50-60Hz, 1.5A- O/P: 19V 3.42A- FSP/ FSP065-RAB- I/P: 100-240V~, 50-60Hz, 1.5A- O/P: 19V 3.42A
Stereo Speaker- 2 internal stereo speakers 3W
Built-In Card- 1 wireless LAN card
Built-In Drive- 1 card reader drive- 1 optical disk drive (Tray type)- 1 hard disk drive (2.5” NB type)
Dimension- 476 mm (W) X 365 mm (H) X 49 mm (D)
1-12
MS-6638 System
Hardware Setup
Step 1. Place your AIO PC on a f lat and steadysurface such as a table or desk.
Step 2. Pull the stand open and tilt the LCD display to an angle of between 14 and24 degrees to suit your preference. This helps to reduce your eye strainand muscle fatigue.
Positioning your AIO PC
14 degrees 24 degrees
1-13
System Overview
Step 1. Connect a USB-interfaced mouse and keyboard to the USB ports on therear panel.
Step 2. Connect a network device to the LAN port and connect necessary au-dio devices to the audio jacks.
Step 3. Connect the power adapter to the power supply.
NOTE: We suggest that you connect the power adapter to your AIO PCfirst and then connect the power cord to the socket-outlet forsafety concerns.
Connecting Peripheral Devices
2-1
Getting Started
Wind Top AE1900 AIO PC is integrated in design, se-lecting an elegant black or white with a glassy frame,which displays the simplicity of modern individualismand the comfort of home. Furthermore, it is accompa-nied with the best computer features, such as instantmessage, low acoustics, energy saving and 802.11 b/g/n wireless internet capability so you may roam freelyin the realm of cyberspace.
Getting StartedChapter 2
2-2
MS-6638 System
For the first-time use, you will need to go over the following steps to start using yourWind Top Series AIO PC. The entire booting setup will take you around 25 minutes.
Step 1. Select the language of operation system you need.
System Booting Setup for the First Time
Step 2. Click [OK] to confirm the selected Windows version.
2-3
Getting Started
Step 4. W indows setup starts running. It takes around 20 minutes to finish theprogress loading.
Step 3. Click [OK] to ensure the AC power connection and do not turn it off whileWindows setup is running.
2-4
MS-6638 System
Step 5. Enter the main page of “Welcome to Microsoft Windows” and click[Next] to continue.
Step 6. Choose the region, language and type of keyboard you need. Click[Next] to continue.
2-5
Getting Started
Step 7. Select the time zone you are in and click [Next] to continue.
Step 8. Select “Yes, I accept” for the End User License Agreement and click [Next]to continue.
2-6
MS-6638 System
Step 9. Select “Help protect my PC by turning on Automatic Updates now”and click [Next] to continue.
Step 10. Enter the computer name and computer descriptions you want. Click [Next]to continue.
2-7
Getting Started
Step 11. Assume and Internet connection cannot be chosen yet. Click [Skip] tocontinue. Then, select “No, not at this time.” to register with Microsoft®
later and click [Next] to continue.
Step 12. Enter the computer user name and click [Next] to continue.
2-8
MS-6638 System
Step 13. Click [Finish] and then the main page of Windows comes out.
Step 14. Touch screen will automatically be activated and post the default homepage of MSI Wind Touch. Wind Top Series AIO PC will be ready for use fromhere.
2-9
Getting Started
For the first-time use, it is required for you to create a system recovery disk as thebackup solution for any accidents. Before moving forward, please make sure yoursystem booting setup is complete and go over the following procedures to get it done.
Step 1. Select the icon of “MSI BurnRecovery” on the desktop screen and
click through it.
Step 2. Click [Next] to start the image creation of the recovery disk.
How to Create the System Recovery Disk
2-10
MS-6638 System
Step 3. Select “Create and burn a recovery disk” and click [Next] to continue.
Step 4. The progress bar starts running to create the image of recovery disk. It takesaround 2-3 minutes to finish the porcessing.
2-11
Getting Started
Step 5. Insert a blank DVD-R disk (free bundle with the standard package) andclick [Next] to continue.
Step 6. The user interface of Ulead Burn. Now pops out. Click [Copy] to start theburning progress. It takes around 9 minutes to finish the processing.
2-12
MS-6638 System
Step 7. The message of “Operation successfully completed” pops out. Click[OK] and take out the disk to finish the recovery disk creation.
2-13
Getting Started
Wind Top Series AIO PC has touch panel function. If the mouse cursor can notmatch the move, users could use the IdeaCom TSC tool installed in system to adjustthe accuracy of the touch panel. Please go over the following steps to get it done.
Step 1. Open the IdeaCom TSC tool by clicking from Start > Programs > IdeaComTSC > IdeaCom TSC.
Touch Panel Calibration
Step 2. Then, the IdeaCom Touch Panel Controller setup utility appears asbelow. Click on “Calibration” to adjust the accuracy of the touch panel. Ithas three modes: 4 points, 9 points and 25 points. We suggest that theuser choose 9 points to adjust touch panel. If the user desires the mostexactness, then choose 25 points instead.
2-14
MS-6638 System
Step 3. Please follow the instruction on the screen to press each symbol: PleaseTouch the Blinking Symbol until Beep or Stop Blinking (ESC to Abort).
Important
1. Do not touch the screen directly with any sharp-pointed object.2. Actual product specifications may very with territories.
2-15
Getting Started
How to Use the Keyboard
Wind Top Series AIO PC packs with a wired keyboard that helps your control of thesystem.
Specifications- Weight: 824 g; Cable: 150 cm
- USB interface for all Windows® OS
- Low profile with silk printing technology
- Built-in 103 keys + 6 multimedia keys + 4 hotkeys
- Dimension: 400 mm (H) X 165 mm (W) X 31 mm (D)
Features- Meet RoHS standards
- Adjustable height feet
- Lock detect light design
- Multimedia slim wired keyboard
- Burnish frame keyboard design
- Key life cycle 10 million times
- Adjustable LCD display brightness
- Low profile structure keyboard for easy input
- Only half the thickness of a standard keyboard (14 mm)
2-16
MS-6638 System
Multimedia KeysVolume + Volume up.
Volume - Volume down.
Play/ Pause Play and pause.
Stop Stop playing media.
Forward Forward to next track.
Backward Backward to previous track.
HotkeysWWW Home Launch default web browser and goes to the home
web page.
E-Mail Launch E-Mail account.
Fn + F5 Decrease the LCD brightness.
Fn + F6 Increase the LCD brightness.
* The illustration of keyboard is for reference only. Actual product specificationsmay vary with territories.
2-17
Getting Started
Connecting to a Wireless LAN
Step 2. The window displays some available wireless networks. Choose a network,and then click Connect.
Step 1. Right-click the Ralink Wireless LAN Card status icon in the lower right corner,and then click Launch Config Utility.
2-18
MS-6638 System
Step 3. There may prompts you to enter a key. Type the network key and then clickOK.
Step 4. Now, you're ready to browse the W eb wirelessly.
top related